color by numbers · their neighbors and lovers of their opposites,” an excellent color theory,...

COLOR BY NUMBERS

2 3

Products featured in photos:Tea for Two WT02 Gloss – 4" x 12"Brown/Cream Liner WTL2/.1.512 – 1/2" x 12"

Color is one of our earliest preferences. It is really not possible to be neutral about color. Think back to

childhood, when having a favorite color was as important as having a best friend. Color is the foundation

of design, and in many ways the foundation of living. Color teaches us harmony

and contrast, chaos and calm, very often in the same space. Marc Chagall said, “All colors are friends of

their neighbors and lovers of their opposites,” an excellent color theory, but also an important life lesson.

Crossville’s tile collections have always reflected that interplay of colors and their relationships with each

other. Color By Numbers is the latest chapter in that continuing color story.

COLOR BY NUMBERSBe inspired.

Products featured in photo above: Sixth Sense WTO6 Gloss – 4" x 8", Eleventh Hour WT11 Gloss – 4" x 8"

Products featured in photo above: Nine Lives WTO9 Satin – 4" x 8", Gray/Aqua Liner WTL3/.1.512 – 1/2" x 12"

Products featured in photo above:Tea for Two WTO2 Gloss – 8" x 8", Eleventh Hour WT11 Gloss – 4" x 8", Lucky Thirteen WT13 Gloss – 4" x 8", Fifteen Minutes of Fame WT15 Gloss – 4" x 8"

4 5

Part of a complete design solution, Color By Numbers wall tile was created to work in tandem

with other elements in your design scheme. Within the Color By Numbers wall tile palette are

six colors created to correspond with bestsellers from the popular Crossville® Color Blox floor

tile collection. To further expand your design possibilities, Crossville is pleased to join with

Benjamin Moore® to offer paint selected with Color By Numbers in mind. Choose from among

six paint colors to beautifully coordinate with or to strikingly complement each Color By

Numbers tile. To view a complete portfolio of the Benjamin Moore® Aura® paint selections and

their Color By Numbers counterparts, visit www.crossvilleinc.com/colorbynumberspaint.

COLOR BY NUMBERS

COLOR BLOX

6 7

THE COLOR STORY

Products featured in photo above: Eight Days a Week WTO8 Gloss – 4" x 8", Nine Lives WTO9 Gloss – 4" x 8"Wall Color: Benjamin Moore 241 Jonesboro Cream

Benjamin Moore colors can only be made in Benjamin Moore Paint

Authentic Color

WTL1/.1.512 White/Black

WTL2/.1.512 Brown/Cream

WTL3/.1.512 Gray/Aqua

Color By Numbers Decorative Listellos

Color By Numbers Brights featured with Benjamin Moore® Aura® Paints (Tiles available in gloss finish only.)

Color By Numbers Neutral Colors featured with Benjamin Moore® Aura® Paints

and coordinating Color Blox Tile

(Tiles available in gloss and satin finish.

Paint pictured is Benjamin Moore® Aura®.

Refer to size chart on back for sizes available.)

WTL4/.1.512 Red/Maroon

WTL5/.1.512 Yellow/Green

Color By Numbers WT11 Eleventh Hour

Color By Numbers WT10 A Perfect Ten /Gloss & Satin

Color By Numbers WT09 Nine LivesGloss & Satin

Color By Numbers WT07 Seventh Inning StretchGloss & Satin

Color By Numbers WT06 Sixth SenseGloss & Satin

Color By N

umbers

WTL5/.1.512 Yellow/GreenListello

Color By NumbersWTL1/.1.512 White/BlackListello

Color By N

umbers WTL1/.1.512 White/BlackListello

Color By Numbers WTL3/.1.512 Gray/Aqua Listello

Color By Numbers WTL4/.1.512 Red/Maroon Listello

89

10 11

Color Blox A1114 Tree House

Color Blox A1117 I See the Moon

Color Blox A1113 Blue Suede Shoes

Color Blox A1108 Sea Otter

Color By Numbers WT04 Four Seasons /Gloss & Satin

Color By Numbers WT14 Carbon-14

Printed colors can only approximate the color of a coated paint chip. For true color accuracy, please use actual Benjamin Moore® Aura® paint chips when making a color selection.

Coventry Gray HC-169

Steam AF-15

Yellow Finch 2024-40

Color Blox A1103 Slinky

Classic Gray OC-23 Province Blue 2135-40 Smoke Gray 2120-40

Dill Pickle 2147-40

Rainforest Dew 2146-50

Dark Linen 2147-60

Raspberry Truffle 2080-10

Wish AF-680

Iron Mountain 2134-30

Britannia Blue 1623

French Beret 1610

Elemental AF-400

Dash of Pepper 1554

Smoke 2122-40

Meadow Mist OC-134

Color By Numbers WT08Eight Days A WeekGloss & Satin

Color Blox A1118 Chocolate Candy

Color By NumbersWTL2/.1.512 Brown/CreamListello

Color By NumbersWTL2/.1.512 Brown/CreamListello

Color By Numbers WTL6/.1.512 Blue/Aqua Listello

Color By NumbersWTL5/.1.512 Yellow/greenListello

Jonesboro Cream 241

Water's Edge 1635

North Creek Brown 1001

Chambourd AF-645

Angelica AF-665

Fusion AF-675

Wildwood Crest 1538

Timothy Straw 2149-40

Golden Straw 2152-50

Cloud White 967 Lemon Grass 339 Masada AF-220

Color By Numbers WT05 Fifth Avenue /Gloss & Satin

Marble Canyon 227 Spring Dust 2150-40 Dark Mustard 2161-30

Brown Horse 2108-30 Sangria 2006-20 Oak Ridge 235WTL6/.1.512 Blue/Aqua

Chocolate Mousse 1025 French Press AF-170

Thunder AF-685

November Rain 2142-60

Sparrow AF-720

Driftwood 2107-40

Color By NumbersWT12 Twelve O'Clock Rock

Heather Gray 2139-40 Captivating Teal 649

Elk Horn AF-105

Narragansett Green HC-157

Deep in Thought AF-30 Hannity Green 646

Color By Numbers WT13 Lucky Thirteen

Mystic Beige 2162-60 Pacific Palisades 762

Weimeraner AF-155

Toffee Orange 2167-40

Picture Perfect 743 Rural Earth 1239

Color By NumbersWT16 Sixteen Candles

Chestnut 2082-10 Thunder AF-685

Beigewood 1007

Barrista AF-175

Baja Dunes 997 Cloud White 967

Neon Red 2087-10 Wasabi AF-430

Silver Chain 1472

Cloud Cover OC-25

Graystone 1475 Black Horizon 2132-30

Color By Numbers WT02 Tea for Two/Gloss and Satin

Color By Numbers WT15 Fifteen Minutes of Fame

Yolk 2023-10 Kasbah AF-640

Lemon Souffle 331

Calm 2111-70

Yellow Lilies 346 Bavarian Cream OC-123

Frosty Lime 2029-70 Amherst Gray HC-167Silver Marlin 2139-50

Rosemary Green 2029-30 Alpine White 2147-70Yorktowne Green HC-133

White Heron OC-57 Revere Pewter HC-172Mauve Blush 2115-40

Pale Avocado 2146-40 Lookout Point 1646Van Deusen Blue HC-156

Color By Numbers WT03 Three Hour Tour /Gloss and Satin

Seapearl OC-19 Pashmina AF-100Nature's Essentials 1521

Knoxville Gray HC-160 Anjou Pear AF-425Rushing River 1574

Jet Black 2120-10 Scandinavian Blue 2068-30Chantilly Lace 2121-70

Sea Haze 2137-50 Etruscan AF-355Vanilla Ice Cream 2154-70

Color By Numbers WT01 One of a Kind /Gloss and Satin

LIT-CBN-11

Shade & Texture Index

Color By Numbers has a shade variation of V1.

Care and MaintenanceRegular cleaning is the best way to keep Color By Numbers tile lookinggood for years to come. Use clean, hot water (combined with a non-abrasive household cleaner, if needed). Rinse thoroughly and drywith a soft cloth to prevent spots. No waxes or sealers are need. Moreinformation regarding the care and maintenance of Crossville®

products is available at www.crossvilleinc.com.

Recommended UseColor By Numbers tile is recommended for interior vertical surfaces inresidential and light commercial applications.

About Benjamin Moore’s Aura® PaintAura® paint is available in eggshell (524), satin (526), and semi-glossfinishes (528). It is easy to apply, washable in any sheen, and comes inall of Benjamin Moore’s more than 3,000 colors. It has low VOCs andall finishes meet the highest performance demands in durability andcolor retention, so the finish is an aesthetic decision, not one based onmaintenance. ColorLock Technology allows for guaranteed coverage intwo coats, regardless of color.

Sizes*n (Available in all colors)Nominal Actual Size (in) Thickness (in)4 x 8 3-15/16 x 7-7/8 1/48 x 8 7-7/8 x 7-7/8 1/44 x 12 3-15/16 x 11-13/16 1/4

Color, Finishes and Sizes (Available in all colors)

ColorFinish

4 x 8 4 x 12

8 x 8 Cove Base Single BullnoseGloss Satin & Corners & Corner

WTO1 � � � � � � �WTO2 � � � � � � �WTO3 � � � � � � �WTO4 � � � � � �WTO5 � � � � � �WTO6 � � � � � �WTO7 � � � � � �WTO8 � � � � � �WTO9 � � � � � �WT10 � � � � � �WT11 � �

WT12 � �

WT13 � �

WT14 � �

WT15 � �

WT16 � �

Coordinating Trim*4 x 8 Cove Base 3-15/16 x 7-7/8 1/44 x 8 Cove Base Corner(left & right) 3-15/16 x 7-7/8 1/4

2 x 8 Single Bullnose 2-3/16 x 7-7/8 1/42 x 2 Bullnose Corner 2-3/16 x 2-3/16 1/41/2 x 12 Listello 7/16 x 11-11/16 1/4*Refer to chart below for color, finish and coordinating trim size availablility.

4 x 8 Cove Base Corner(left & right)

4 x 8 Cove Base 2 x 8 SingleBullnose

2 x 2 Bullnose Corner

COLOR BY NUMBERS

Product featured in photo above: Three Hour Tour WTO3 Satin – 8" x 8", Four Seasons WT04 Satin – 4" x 8"

© 2011 Benjamin Moore & Co.Benjamin Moore, Aura and the triangle “M” symbol are registered trademarks,licensed to Benjamin Moore & Co.Certification pending.

Crossville, Inc. • P.O. Box 1168, Crossville, TN 38557 • Phone: 931.484.2110 • Fax: 931.456.2956 • E-Mail: [email protected] • CrossvilleInc.com

A1101 Sandbox I

A1107 Mud Pie IV

A1102 Roasted Marshmallow I

A1112 Mr. Green Jeans II

A1117 I See the Moon II

A1103 Slinky I

A1108 Sea Otter I

A1113 Blue Suede Shoes IV

A1118 Chocolate Candy IV

A1104 It’s a Boy! I

A1109 Sidewalk Chalk I

A1114 Tree House I

A1119 Night Night III A1120 Grape Jelly III

A1105 Yellow Brick Road IV

A1110 Sea Monkey II

A1115 Camping Out IV

A1106 Limeade I

A1111 A Day at the Beach II

A1116 Caboose II

• Each color coordinates with at least 2-3 other colors

• Subtle variations in texture and shading add visual interest

• Cross-Sheen® finish for easy cleaning

• Designed to coordinate with Bentley Prince Street carpet

• Available only from Crossville®

• Made in U.S.A.

• Crossville recommends a grout joint of 3/16 to 1/4 inch

Color Palette

Features and Benefits

Price Groups:I = Price Group I II = Price Group II III = Price Group III IV = Price Group IV

Porcelain Stone®

Color Blox

Crossville’s Hydrotect process is available on all Color Blox tiles for an additional charge*. The Hydrotect process makes the tile to which it is fired have antimicrobial effects and be self-cleaning and air purifying. Visit CrossvilleInc.com/Hydrotect for more information and availability of adding Hydrotect to our tile.


Sizes & FinishesField Tile Available in all colors

Nominal (in) Actual (in) Thickness (in) Finish

6 x 6† 5-13/16 x 5-13/16 3/8 UPS

6 x 12† 5-13/16 x 11-13/16 3/8 UPS

12 x 12 11-13/16 x 11-13/16 3/8 UPS

12 x 18† 11-13/16 x 17-13/16 3/8 UPS

18 x 18 17-13/16 x 17-13/16 3/8 UPS† The cut/bevel tile is cut from larger format tile and the edges are beveled to provide a factory appearance. Please allow two to eight weeks for delivery depending on Crossville’s production schedule. Crossville recommends a grout joint of 3/16 to 1/4 inch.

Product Performance

Breaking Strength >450 lbf ASTM C648

Bond Strength >200 psi ASTM C482

Chemical Resistance Unaffected ASTM C650

Frost Resistance Resistant ASTM C1026

Water Absorption <0.10% ASTM C373

Scratch Hardness 6 Mohs Scale

Static Coefficient of FrictionUPS Dry ≥0.8 ASTM C1028

UPS Wet ≥0.6 ASTM C1028

Wet Dynamic COF (wet slip potential)

UPS .42 – .52 DCOF AcuTest™

Shade & Texture IndexColor Blox has a shade variation of V3.

Coordinating TrimNominal (in) Actual (in) Thickness (in) Finish

4 x 12 Single Bullnose 3-3/4 x 11-3/4 3/8 UPS

4 x 12 Bullnose Corner UPS Left & Right 3-3/4 x 11-3/4 3/8

6 x 12 Cove Base 5-7/8 x 11-3/4 3/8 UPS

6 x 8 Cove Base Corner 5-7/8 x 7-3/4 3/8 UPS Left & Right

18 x 18

12 x 18

12 x 12

6 x 12

6 x 6

Sizes (shown in A1102 Roasted Marshmallow)

4 x 12 Single 4 x 12 Single 4 x 12 Single 6 x 12 Cove Base 6 x 8 Cove Base 6 x 8 Cove Base Bullnose Bullnose Corner Left Bullnose Corner Right Corner Left Corner Right

This porcelain tile product is produced with a V3 variation. Expect that the amount of color and texture on each piece may vary significantly. Inspect the product upon delivery and for best results, blend tile from several cartons during installation.

Information listed here is subject to change. Please refer to CrossvilleInc.com for the latest, most accurate information.

Porcelain Stone®

Color Blox

V1 Uniform appearance

V2 Slight Variation

V3 Moderate Variation

V4 Substantial Variation

V2 V3 V4V1

Our Porcelain Stone® products are available in popular plank shapes with no minimum order and quick fulfillment. Depending on the product, there are up to 4 widths and 7 lengths, creating more than 2,796 combinations.

Get Planked!

FS-C

B-13

Environmentally AwareTrade Organizations

Color Blox is recommended for interior floors, walls, countertops, and exterior walls in both commercial and residential applications. If offset pattern is required for tiles 18 inches or longer, Crossville® recommends an offset of not greater than 33%. See CrossvilleInc.com for detailed installation instructions.

Regular cleaning is the best way to keep Color Blox tile looking good for years to come. Use clean, hot water (combined with a household cleaner for more aggressive cleaning). Rinse thoroughly and dry with a soft cloth. No waxes are needed. More information regarding the care and maintenance of Crossville® products is available at CrossvilleInc.com.

Care and Maintenance

Color Blox contains a minimum of 4% pre-consumer recycled content and is manufactured by Crossville® using processes that have been certified by Scientific Certification Systems. SCS has verified that through these recycling processes Crossville recycles nearly 12 million pounds of previously discarded filtrate and fired tile waste. In addition to its own fired waste recycling, Crossville also accepts and recycles reclaimed, previously installed tile through its Tile Take-Back™ Program. For more information, visit CrossvilleInc.com/green.

Environmentally ConsciousRecommended Use

Color Blox Crossville, Inc. PO Box 1168Crossville, TN38557

Phone 931.484.2110 Fax 931.456.2956E-Mail [email protected] CrossvilleInc.com

Crossville is pleased to offer our extensive line of award-winning Porcelain Stone floor and wall tile and our beautiful line of accent tiles to government customers at GSA pricing.

Located in Crossville, Tennessee, we have an industry-leading logistics system to ensure you get your tile when and where you need it, on time and on budget.

.

For over 20 years we have been offering Porcelain tile to commercial customers at National Accounts pricing programs with special discounts. The National Accounts department provides materials forecasting, sales support and samples.

GSA Pricing

Programs

Class Act

Created as a comprehensive solution for educational facilities, Class Act not only offers versatility in design, but also provides the assurance that comes with buying American-made products from a proven provider.

Exterior Cladding

Crossville’s Porcelain Stone® Exterior Cladding Systems are suitable for virtually any conventional masonry application. When used in conjunction with our exterior cladding systems, Crossville’s Porcelain Stone offers clear advantages: decreased construction costs, less site disturbance, low-to-zero maintenance after installation, accelerated construction schedules and greater strength than traditional masonry.

Information listed here is subject to change. Please refer to CrossvilleInc. com for the latest, most accurate information.

National Accounts

Our Warranty

Crossville Inc guarantees that its products will meet or exceed the performance specifications outlined in ANSI A137.1-2008 and in the performance data section of the Crossville, Inc. general product catalog. For complete details check our website at CrossvilleInc.com.

Sample fulfillment & Help Line [email protected] 1 800 221.9093

Loose Samples for Architects & Designers

Loose Tile Samples Sizes may vary depending on product series Max. of 4 large field tile per order

Replacement Chips for PSS Rack Max. of 5, 2 x 2 chips per color

Standard Shipping UPS Ground

Crossville® Sample Express

A1110 Sea Monkey 6 x 6 A1111 A Day at the Beach 12 x 12


Color Palette


Porcelain Stone®

Ready to Wear

AV311 Buttoned UpAV312 Hand in Glove

AV313 Off the CuffAV314 Perfect Fit

AV315 Decked OutAV316 Smarty Pants

AV317 Flannel Suit AV318 Hats Off

Cools Warms

• patterned with classic warp and weft texture

• Eight smart-casual shades

• Monochromatic schemes are effortlessly chic, or mix-and-match to show your creative side

• Sizes offered 12 x 24 and 2 x 6

• Trim includes 4 x 24 single bullnose


• Plank shapes are also available through Crossville’s Get Planked® program, which offers a variety of plank sizes with no minimum order and a short lead time


AV311 Buttoned Up 12 x 24 and 3 x 24 UPS finish

AV314 Perfect Fit 12 x 24 UPS finish

Get Planked!

Our Porcelain Stone® products are available in popular plank shapes with no minimum order and quick fulfillment.

See website for more details and sizes.

Sizes & FinishesField Tile


2 x 6 1-13/16 x 5-13/16 3/8 UPS

12 x 24 11-13/16 x 23-13/16 3/8 UPS

Product Performance







Wet Dynamic Coefficient of Friction Range

UPS 0.50 - 0.60 AcuTestsm

Coordinating Trim



V2 V3 V4V1 V1 Uniform appearanceV2 Slight VariationV3 Moderate VariationV4 Substantial Variation

This porcelain tile product is produced with a V2 variation. Expect that the amount of color and texture on each piece may vary slightly. Inspect the product upon delivery and for best results, blend tile from several cartons during installation.


Ready to Wear has a shade variation of V2.

4 x 24 Single Bullnose

Sizes (Available in all colors)

12 x 24

2 x 6

Crossville recommends a grout joint of 3/16” to 1/4”Actual measurements stated in inches indicate tile is calibrated (non-rectified).Actual measurements stated in mm indicate tile is rectified.

Porcelain Stone®

Ready to Wear

FS-R

TW-15


Ready to Wear is recommended for interior floors, walls, countertops, and exterior walls in both residential and commercial applications. Ready to Wear is not recommended for exterior horizontal surfaces or exterior paving. If offset pattern is required for tiles 18 inches or longer, Crossville® recommends an offset of not greater than 33%. See CrossvilleInc.com for detailed installation instructions.

Ready to Wear contains a minimum of 4 percent pre-consumer recycled content and is manufactured by Crossville® using processes that have been certified by Scientific Certification Systems. SCS has verified that through these recycling processes Crossville recycles nearly 12 million pounds of previously discarded filtrate and fired tile waste. In addition to its own fired waste recycling, Crossville also accepts and recycles reclaimed, previously installed tile through its Tile Take-Back™ Program. For more information, visit CrossvilleInc.com/green.

EcoCycle Tile Process™

Recommended Use




GSA Pricing

Programs

Class Act


Exterior Cladding


National Accounts

Our Warranty








Regular cleaning is the best way to keep Ready to Wear tile looking good for years to come. Use clean, hot water (combined with a household cleaner for more aggressive cleaning). Rinse thoroughly and dry with a soft cloth. No waxes are needed. More information regarding the care and maintenance of Crossville® products is available at CrossvilleInc.com.


Photo below: AV317 Flannel Shirt 12 x 24 UPS finish

Ready to Wear Crossville, Inc. PO Box 1168Crossville, TN38557




• Subtle striations and aggregate finishes create a depth and integrity

• Each tile color in the Gotham series takes inspiration and its name from iconic cityscapes.

• Sizes offered 12 x 24 and 2 x 6 calibrated tile

• Trim includes 4 x 24 single bullnose and 6 x 12 covebase (universal flat top)


• Contains a minimum 4% recycled content and is Green Squared Certified

• Plank shapes are also available through Crossville’s Get Planked® program, which offers a variety of plank sizes with no minimum order and a short lead time

Porcelain Stone®

Gotham

AV321 Lamp Post AV322 Penthouse

AV324 Mainline

AV326 Pavement

AV323 Clock Tower

AV325 Dockside

Colors


Porcelain Stone®

Gotham

Get Planked!



Sizes Available in all colors

2 x 6

12 x 24

Sizes & FinishesField Tile


2 x 6 1-13/16 x 5-13/16 3/8 UPS

12 x 24 11-13/16 x 23-13/16 3/8 UPS

Product Performance








UPS .50 – .60 AcuTestSM

Coordinating Trim



6 x 12 Cove Base 5-7/8 x 11-3/4 3/8 UPS

Crossville recommends a grout joint of 3/16 to 1/4 inch.Actual measurements stated in inches indicate tile is calibrated (non-rectified).Actual measurements stated in mm indicated tile is rectified.

6 x 12 Cove Base (universal flat top)



This porcelain tile product is produced with a V2 variation. Expect that the amount of color and texture on each piece may vary slightly. Inspect the product upon delivery and for best results, blend tile from several cartons during installation.


Gotham has a shade variation of V2.

AV325 Dockside 12 x 24

FS-G

OTHHAM-15


Available




GSA Pricing

Programs

Class Act


Exterior Cladding


National Accounts

Our Warranty








Gotham Crossville, Inc. PO Box 1168Crossville, TN38557


Gotham contains a minimum of 4 percent pre-consumer recycled content and is manufactured by Crossville® using processes that have been certified by Scientific Certification Systems. SCS has verified that through these recycling processes Crossville recycles nearly 12 million pounds of previously discarded filtrate and fired tile waste. In addition to its own fired waste recycling, Crossville also accepts and recycles reclaimed, previously installed tile through its Tile Take-Back™ Program. For more information, visit CrossvilleInc.com/green.

Gotham is recommended for interior floors, walls, countertops, and exterior walls in both residential and commercial applications. Gotham is not recommended for exterior horizontal surfaces or exterior paving. If offset pattern is required for tiles 18 inches or longer, Crossville® recommends an offset of not greater than 33%. See CrossvilleInc.com for detailed installation instructions.

Environmentally Conscious

Recommended UseRecommended UseRecommended Use

Regular cleaning is the best way to keep Gotham tile looking good for years to come. Use clean, hot water (combined with a household cleaner for more aggressive cleaning). Rinse thoroughly and dry with a soft cloth. No waxes are needed. More Information regarding the care and maintenance of Crossville® products is available at CrossvilleInc.com.

Available with Hydrotect™. Crossville’s revolutionary invisible coating harnesses the power of light, water and oxygen to create the best offense and defense against dirt, pollution and bacteria on any porcelain surface–walls or floors–indoors or outdoors. For complete details check our website at CrossvilleInc.com.



Our WarrantyHydrotect

AV323 Clock Tower 12 x 24L4338 Laminam by Crossville 5.6 Fokos - Piombo


AV241 Frost UPS 4% Recycled content

AV247 Haze UPS 20% Recycled content

SBC1/.10103HMOS Warm Grays (AV243, AV245, AV247)

SBC2/.10212MT Shine

SBC1/.10212MT Luster

AV242 Vapor UPS 4% Recycled content

AV248 Thunder UPS 20% Recycled content

SBC2/.10103HMOS Cool Grays (AV244, AV246, AV248)

AV243 Fog UPS 4% Recycled content

AV249 Ink UPS 20% Recycled content

SBC3/.10103HMOS Whites (AV241, AV242)

AV244 Mist UPS 4% Recycled content

AV245 Clay UPS 20% Recycled content

AV246 Ash UPS 20% Recycled content

• Minimum 4% third-party certified pre-consumer recycled content

• Honed mosaics and metallic borders add design versatility and aesthetic appeal

• Cross-Sheen® finish for easy cleaning available on UPS only

• Comprised of nine contemporary colors

• Rectified and designed to be modular with a minimum 3mm grout joint

• Features subtle linear pattern. This patterncan run in the same direction or alternate to provide greater visual texture


Mosaic blends available* 1 x 3 Mosaic Border**

Color Palette

AV241 Frost HON 4% Recycled content

AV242 Vapor HON 4% Recycled content

AV243 Fog HON 4% Recycled content

AV244 Mist HON 4% Recycled content

AV245 Clay HON 20% Recycled content

AV246 Ash HON 20% Recycled content

AV247 Haze HON 20% Recycled content

AV248 Thunder HON 20% Recycled content

AV249 Ink HON 20% Recycled content

* Honed finish only.** Globally sourced.

Shades by Crossville™

Crossville’s Hydrotect process is available on all Shades by Crossville™ tiles for an additional charge*. The Hydrotect process makes the tile to which it is fired have antimicrobial effects and be self-cleaning and air purifying. Visit CrossvilleInc.com/Hydrotect for more information and availability of adding Hydrotect to our tile.* Mounted tiles are not available with Hydrotect process.


Mosaic & Mosaic Border Available in all colors

Nominal (in) Actual (mm) Thickness (mm) Finish

1 x 3 Mosaics* 297 x 297 10.5 HON

1 x 3 Mosaics Border** 47 x 334.5 10.5 Metallic

* 1 x 3 honed mosaics mesh mounted in 11-7/8 x 11-7/8 sheets.** Mounted on a 2 x 13 sheet. Globally sourced.



6 x 24 147 x 597 10.5 UPS/HON

12 x 24 297 x 597 10.5 UPS/HON

24 x 24 597 x 597 10.5 UPS/HON

Note: All field tile is rectified and modular with a minimum 3mm grout joint.

Product Performance







Static Coefficient of Friction

UPS Dry ≥0.8 ASTM C1028

UPS Wet ≥0.6 ASTM C1028

HON Dry ≥0.6 ASTM C1028

HON Wet n/a ASTM C1028

Wet Dynamic COF (wet slip potential)

UPS 0.50 – 0.60 DCOF AcuTest™

HON 0.42 – 0.52 DCOF AcuTest™

6 x 24

24 x 24

12 x 24

Sizes (Shown in AV248 Thunder UPS)


Shades by Crossville™ has a shade variation of V2.

4 x 24 Bullnose 6 x 12 Cove Base

Coordinating Trim Available in all colors



97 x 597 10.5 UPS/HON

6 x 12 Cove Base

150 x 297 10 UPS

Shades by Crossville™


This porcelain tile product is produced with a V2 variation. Differences among pieces from the same production run are minimal. Inspect the product upon delivery and for best results, blend tile from several cartons during installation.

Our Porcelain Stone® products are available in popular plank shapes with no minimum order and quick fulfillment. Depending on the product, there are up to 4 widths and 7 lengths, creating more than 2,796 combinations.

Get Planked!

FS-S

HADES-13


Shades by Crossville™ contains a minimum of 4% pre-consumer recycled content and is manufactured by Crossville® using processes that have been certified by Scientific Certification Systems. SCS has verified that through these recycling processes Crossville recycles nearly 12 million pounds of previously discarded filtrate and fired tile waste. In addition to its own fired waste recycling, Crossville also accepts and recycles reclaimed, previously installed tile through its Tile Take-Back™ Program. For more information, visit CrossvilleInc.com/green

Environmentally ConsciousRecommended Use

Shades by Crossville™ is recommended for interior floors, walls, countertops, and exterior walls in both residential and commercial applications. Shades by Crossville™ is not recommended for exterior horizontal surfaces or exterior paving. The honed field tile is not recommended for wet areas where standing water may occur. If offset pattern is required for tiles 18 inches or longer, Crossville® recommended an offset of not greater than 33%. See CrossvilleInc.com for detailed installation instructions.

Shades by Crossville™ Crossville, Inc. PO Box 1168Crossville, TN38557




.


GSA Pricing

Programs

Class Act


Exterior Cladding


Crossville Inc. guarantees that its products will meet or exceed the performance specifications outlined in ANSI A137.1-2008 and in the performance data section of the Crossville, Inc. general product catalog. For complete details check our website at CrossvilleInc.com.

Our Warranty

National Accounts








Regular cleaning is the best way to keep Shades by Crossville™ tile looking good for years to come. Use clean, hot water (combined with a household cleaner for more aggressive cleaning). Rinse thoroughly and dry with a soft cloth. No waxes are needed. More information regarding the care and maintenance of Crossville® products is available at CrossvilleInc.com.

Care and MaintenanceCrossville® produces the Shades by Crossville™ mosaics with the honed (HON) finish and the AcuTestsm Wet Dynamic COF ≥ .42. Their small sizes ensure frequent grout joints which provides traction and drainage. Crossville cannot control situations involving incorrect installation, improper slope to the drain for elimination of standing water and poor surface cleaning.

This information is provided so that customers may make a realistic and informed decision when comparing Shades by Crossville to other tile products in wet area environments, such as residential/commercial bathrooms, showers, and interior pool decks.

Wet Tile Use

AV249 Ink 6 x 24 Honed AV249 Ink 12 x 24 UPS

Porcelain Stone®

Reclamation

Distinctly American. Uniquely Crossville.

Cities speak in wood, stone and concrete, and Crossville listens.

Reclamation is a porcelain tile collection by Crossville created with digital production technology. With its urban influences and appearance, Reclamation echoes the comeback spirit of reclaimed materials and revitalized cities.

The line’s four distinct colors—Whiskey Lullaby, Cotton Exchange, Steel City and Tobacco Road—are comprised of 16 different faces blended to capture an ‘industrial chic’ look that’s versatile—and modern with a hint of nostalgia. These hues are interpreted in substantial 12x24 and 24x24 sizes, along with a 6x24 etching accent that gives a nod to graffiti art.

Appropriately, Reclamation is manufactured in the U.S. with a minimum 4% recycled content. The line’s superior technical properties make it suitable for commercial and residential use on interior f loors and walls, as well as exterior vertical surfaces. Its urban glam style is sure to bring an industrial evolution to contemporary decor.

Learn more at CrossvilleInc.com.

Porcelain Stone®

Reclamation

AV271 Cotton Exchange 12 x 24, UPS Finish*AV271 Cotton Etching 6 x 24, UPS Finish*SV01/.103031 Sideview Glass, Silver 3 x 3 Mosaic, Polished Finish**

*Made in the USA **Globally Sourced

2

3

Color Palette

AV271 Cotton Exchange UPS

AV272 Tobacco Road UPS

* Examples shown are cut from 3 different large designs, resulting in a random visual. Individual pattern/graphics may not be specified.

AV274 Steel City UPS AV271 Etchings Cotton UPS*

AV272 Etchings Tobacco UPS*

AV274 Etchings Steel UPS*

AV273 Etchings Whiskey UPS*

AV273 Whiskey Lullaby UPS

Colors (Available in all 4 colors) Etchings (Accent tile available in all 4 colors*)

This porcelain tile product is produced with a V4 variation. Due to the product’s 16 different faces expect that the amount of color and texture on each piece may vary significantly. Inspect the product upon delivery and for best results, blend tile from several cartons during installation.

4

Specifications

Sizes (Field tile available in all 4 colors)

Etchings (Accent tile available in all 4 colors*)


Reclamation has a shade variation of V4.


This porcelain tile product is produced with a V4 variation. Due to the product’s 16 different faces expect that the amount of color and texture on each piece may vary significantly. Inspect the product upon delivery and for best results, blend tile from several cartons during installation.

* Examples shown are cut from 3 different large designs, resulting in a random visual. Individual pattern/graphics may not be specified.

Product Performance








UPS 0.50 - 0.60 AcuTestsm

4 x 24 Single Bullnose(available in all colors)

Coordinating Trim Available in all colors


4 x 24 Single Bullnose 96 x 597 10.5 UPS

Etchings (Accent tile available in all 4 colors) Available in all colors


6 x 24 147 x 597 10.5 UPS



12 x 24* 297 x 597 10.5 UPS

24 x 24* 597 x 597 10.5 UPSNote: Field tile is rectified and modular with a minimum 3mm grout joint.* This product is manufactured as 24 x 24 with 16 different faces in each color. The 12 x 24 size is cut from the larger format therefore increasing the variation.


24 x 24

12 x 24

AV271 Etchings Cotton

6 x 24

AV272 Etchings Tobacco

6 x 24

AV274 Etchings Steel

6 x 24

AV273 Etchings Whiskey

6 x 24

5


AV271 Cotton Exchange 12 x 24 UPS Finish AV272 Etchings Tobacco 6 x 24 UPS Finish

Reclamation contains a minimum of 4% pre-consumer recycled content and is manufactured by Crossville® using processes that have been certified by Scientific Certification Systems. SCS has verified that through these recycling processes Crossville recycles nearly 12 million pounds of previously discarded filtrate and fired tile waste. In addition to its own fired waste recycling, Crossville also accepts and recycles reclaimed, previously installed tile through its Tile Take-Back™ program.For more information, visit CrossvilleInc.com/green.

This product is manufactured as 24 x 24 with 16 different faces in each color. The 12 x 24 size is cut from the larger format therefore increasing the variation.

Etchings shown are cut from 3 different large designs, resulting in a random visual. Individual pattern/ graphics may not be specified.

Reclamation is recommended for interior floors, walls, countertops, and exterior walls in both residential and commercial applications. Reclamation is not recommended for exterior horizontal surfaces or exterior paving. If offset pattern is required for tiles 18 inches or longer, Crossville® recommends an offset of not greater than 33%. See CrossvilleInc.com for detailed installation instructions.

Crossville Inc. guarantees that its products will meet or exceed the performance specifications outlined in ANSI A137.1-2008 and in the performance data section of the Crossville, Inc. general product catalog. For complete details check our website at CrossvilleInc.com.

Environmentally Conscious

Product Variation

Recommended UseRecommended Use

Our Warranty

Regular cleaning is the best way to keep Reclamation tile looking good for years to come. Use clean, hot water (combined with a household cleaner for more aggressive cleaning). Rinse thoroughly and dry with a soft cloth. No waxes are needed. More information regarding the care and maintenance of Crossville® products is available at CrossvilleInc.com.

Care and MaintenanceCare and Maintenance



Get Planked!

Front Cover: AV273 Whiskey Lullaby 24 x 24, UPS Finish

6

AV274 Steel City 24 x 24, UPS Finish

7

AV272 Tobacco Road 24 x 24, UPS Finish*SV03/.103031 Gold 3 x 3 Mosaic, Polished Finish**L2092 Laminam Filo 3+, Argento**

*Made in the USA **Globally Sourced

8

Color Palette

*This product is manufactured as 24 x 24 with 16 different faces in each color. The 12 x 24 size is cut from the larger format therefore increasing the variation.

Cools - AV271 & AV274

AV271 Cotton Exchange UPS (Showing 16 faces)*

AV271 Etchings Cotton 6 x 24 UPSExamples shown are cut from 3 different large designs, resulting in a random visual.Individual pattern/graphics may not be specified.

9

AV274 Steel City UPS (Showing 16 faces)*

AV274 Etchings Steel 6 x 24 UPSExamples shown are cut from 3 different large designs, resulting in a random visual.Individual pattern/graphics may not be specified.

10

AV272 Tobacco Road UPS (Showing 16 faces)*

AV272 Etchings Tobacco 6 x 24 UPSExamples shown are cut from 3 different large designs, resulting in a random visual.Individual pattern/graphics may not be specified.

Color Palette

Warms - AV272 & AV273

11

AV273 Whiskey Lullaby UPS (Showing 16 faces)*

AV273 Etchings Whiskey 6 x 24 UPSExamples shown are cut from 3 different large designs, resulting in a random visual.Individual pattern/graphics may not be specified.

LIT-R

ECLAM-13

Porcelain Stone®

ReclamationCrossville, Inc. PO Box 1168

Crossville, TN38557


AV273 Whiskey Lullaby 24 x 24 UPS

1

CROSSVILLE® LAMINAM® Thin-Body Porcelain Panels Installation Guidelines

SCOPE Interior installations of CROSSVILLE® LAMINAM® large, thin-body, porcelain panels on walls. NOTE TO SPECIFIER Tiles, mortars, and grouts do not provide a completely waterproof barrier. Detail and specify LATICRETE® Hydro Ban™ in all wet areas and over existing, non-structural, hairline cracks (≤ 1/8” or 3mm) in the substrate. A LATICRETE "System" approach to installation is covered by a comprehensive 25 year warranty (Reference LATICRETE DS 025.0 APD). MATERIALS Tiles: CROSSVILLE® LAMINAM® thin-body porcelain panels as supplied by CROSSVILLE; www.laminambycrossville.com. Thick Bed Mortar: LATICRETE® 3701 Fortified Mortar Bed Waterproofing/Crack Suppression Membrane: LATICRETE Hydro Ban™ Thin Bed Adhesive Mortar: LATICRETE 254 Platinum Rapid-Setting Thin Bed Adhesive Mortar: LATICRETE 254R Platinum Rapid Rapid-Setting Medium Bed Adhesive Mortar: LATICRETE 4-XLT™ Rapid Polymer Fortified Cement Grout: LATICRETE PermaColor™ Grout Stain Resistant Epoxy Grout: LATICRETE SpectraLOCK® PRO Premium Grout. 100% Silicone Caulk: LATICRETE Latasil™ Installation materials to be supplied by LATICRETE International, Inc.; Bethany, CT; USA Telephone: 1 (203) 393-0010; Fax: 1 (203) 393-1684; E-mail: [email protected]; Website: www.laticrete.com. SUITABLE SUBSTRATES Existing ceramic tiles (must be clean, sound, and well-bonded to substrate beneath) Cement backer board walls over properly constructed steel and wood framing Properly prepared concrete and CMU walls

PREPARATIONS The contractor is to examine substrates and advise General Contractor and Architect of existing conditions and surface contamination which will require correction before the work commences. Substrates are to comply with deflection requirements called for by International Building Code (IBC), International Residential Code (IRC), or applicable local building code. All curing compounds, concrete sealers, residual installation mortars, dirt, dust, paints, etc. are to be mechanically removed using diamond or carborundum grinding disks; followed by a clean water wash. Maximum substrate variation not to exceed 1/8" in 10’ (3mm in 3m) and 1/16” in 1’ (1,5 mm in 30 cm) when measured from surface high points with a straight-edge. LATICRETE 3701 Fortified Mortar Bed is to be used for truing / flattening all suitable concrete and masonry substrates. MOVEMENT JOINTS Existing joints in substrate to be carried through the thin-body porcelain panel installation and conform to architectural details. Expansion joints are to be installed where thin-body porcelain panels meet restraining surfaces (e.g. perimeter walls, curbs, columns, corners, etc.) and at all changes-in-plane in the Work. Joints are to be clean and free of all contaminants and thin-set mortar. Refer to Tile Council of North America (TCNA) Detail EJ-171 for industry guidelines. LATICRETE® Latasil™ to be used to caulk all movement joints in thin panel installation.

http://www.laminambycrossville.com/

mailto:[email protected]

http://www.laticrete.com/

2

INSTALLATION: WATERPROOFING AND CRACK ISOLATION MEMBRANE Install LATICRETE® Hydro Ban® in compliance with current revisions of ANSI A108.1 (2.7 Waterproofing), ANSI A108.13, and ANSI A108.17. Review the installation and plan the application sequence. Pre-cut LATICRETE Waterproofing/Anti-Fracture Fabric (if required), allowing 2” (50mm) for overlap at ends and sides to fit the areas as required. Roll up the pieces for easy handling and placement. Shake or stir LATICRETE Hydro Ban® before using. Pre-Treat Cracks and Joints - Fill all substrate cracks, cold joints and control joints to a smooth finish using a LATICRETE latex-fortified thin-set. Alternatively, a liberal coat* of LATICRETE Hydro Ban applied with a paint brush or trowel may be used to fill in non-structural joints and cracks. Apply a liberal coat* of LATICRETE Hydro Ban approximately 8” (200mm) wide over substrate cracks, cold joints, and control joints using a paint brush or heavy napped paint roller. Pre-Treat Coves and Floor/Wall Intersections - Fill all substrate coves and floor/wall transitions to a smooth finish and changes in plane using a LATICRETE latex-fortified thin-set. Alternatively, a liberal coat* of LATICRETE Hydro Ban applied with a paint brush or trowel may be used to fill in cove joints and floor/wall transitions <1/8” (3mm) in width. Apply a liberal coat* of LATICRETE Hydro Ban approximately 8” (200mm) wide over substrate cracks, cold joints, and control joints using a paint brush or heavy napped paint roller. Pre-Treat Penetrations - Allow for a minimum 1/8” (3mm) space between drains, pipes, lights, or other penetrations and surrounding ceramic tile, stone or brick. Pack any gaps around pipes, lights or other penetrations with a LATICRETE latex-fortified thin-set. Apply a liberal coat* of LATICRETE Hydro Ban around penetration opening. Cover the first coat with a second liberal coat* of LATICRETE® Hydro Ban®. Bring LATICRETE Hydro Ban up to level of tile or stone. When LATICRETE Hydro Ban has dried to the touch seal with LATICRETE Latasil™. Main Application - Allow any pre-treated areas to dry to the touch. Apply a liberal coat* of LATICRETE Hydro Ban with a paint brush or heavy napped roller over substrate including pre-treated areas and allow to dry to the touch. Install another liberal coat* of LATICRETE Hydro Ban over the first coat. Let the top coat of LATICRETE Hydro Ban dry to the touch approximately 1 – 2 hours at 70°F (21°C) and 50% RH. When the top coat has dried to the touch inspect the surface for pinholes, voids, thin spots or other defects. LATICRETE Hydro Ban will dry to an olive green color when fully cured. Use additional LATICRETE Hydro Ban to seal any defects. Movement Joints - Apply a liberal coat* of LATICRETE Hydro Ban, approximately 8” (200mm) wide over the areas. Then embed and loop the 6” (150mm) wide LATICRETE Waterproofing/Anti-Fracture Fabric and allow the LATICRETE Hydro Ban liquid to bleed through. Immediately apply a second coat of LATICRETE Hydro Ban. Protection - Provide protection for newly installed membrane, even if covered with a thin-bed ceramic tile, stone or brick installation against exposure to rain or other water for a minimum of 2 hours at 70°F (21°C) and 50% RH. For temperatures between 45°F and 69°F (7°C to 21°C) allow a minimum 24 hour cure period. * Dry coat thickness is 20 – 30 mil (0.02 - 0.03” or 0.5 - 0.8mm); consumption per coat is approximately 0.01 gal/ft2 (approx. 0.4 L/m2); coverage is approximately 100 ft2 /gal (approx. 2.5 m2/ L). LATICRETE Waterproofing/Anti-Fracture Fabric can be used to pre-treat cracks, joints, curves, corners, drains, and penetrations with LATICRETE Hydro Ban. MIXING Mix according to printed product instructions included with each product package. INSTALLATION: LAMINAM PANELS Installations are to comply with current revisions of ANSI A108.02, A108.1B and ANSI A108.5. Select an appropriately-sized ‘Euro-notch’ trowel (e.g. Tile Masters’ 1Y, 1YW, or 2YW trowels) or slant-notch trowel (e.g. Raimondi 5/16” x 5/16” or 8mm x 8mm) that will provide full bedding and coverage to the panel backs. Use flat side of trowel to apply the adhesive mortar into full contact with the substrate. Immediately following, apply mortar with notched side of trowel. Spread only as much mortar as can be covered while the mortar surface is still wet and tacky. Mortar is to be applied to the panel backs using the notch side of the trowel. Trowel ridges on both the panel backs and substrate must be parallel to each other when panels are installed to assist in achieving 100% adhesive coverage to panel backs. Mechanical edge-leveling systems are strongly recommended to help minimize lippage between panel edges. Consult edge-leveling system manufacturer for detailed instructions on use of their systems. Allow installation to cure for minimum 48 hours at 70° F (21° C). Clean excess mortar from panel surfaces and panel joints while fresh.

3

PORTLAND CEMENT GROUTING Allow thin-body porcelain panel installation to cure minimum 48 hours at 70° F (21°C). Verify grout joints are free of dirt, debris, thin-set mortar and grout spacers. Sponge or wipe dust/dirt off panel surfaces. Remove all water standing in joints. Apply grout release to panels to facilitate cleaning. Surface temperature must be between 40-90° F (4-32°C). Mixing: Pour approximately 64 oz. (1.9 L) of clean, potable water into a clean mixing container. Add a 25 lb. (11.3 kg) bag of LATICRETE PermaColor™ Grout to the container while mixing. Mix with a slow speed mixer to a smooth, stiff consistency. Allow to slake for 5 minutes and remix. Install grout per current revisions of ANSI A108.1A (7.0 Grouting of tile), ANSI A108.02 (4.5 Cleaning tile) and ANSI A108.10. Dampen dry surfaces with clean water. Spread using a sharp edged, hard rubber float and work grout into joints. Using diagonal (at 45° angle to direction of grout line) strokes, pack joints full and free of voids/pits. Hold float face at a 90° angle to panel surface and use float edge to "squeegee" off excess grout, stroking diagonally to reduce pulling grout out of filled joints. Initial cleaning can begin when grout has become firm, typically 15-20 minutes after grouting @ 70° F (21°C). Higher temperatures may require faster time to initial cleaning; wider joints or lower temperatures may require a longer time to initial cleaning. Begin initial cleaning by lightly dampening the entire grouted area with a damp sponge. Then, wash clean the entire area with a damp (not wet) sponge. Drag a clean, dampened sponge diagonally over the panel surfaces to remove grout haze left after “squeegeeing.” Rinse towel/sponge frequently. Change rinse water at least every 200 ft2 (19m2). Repeat this cleaning sequence again if grout haze is still present. Allow grout joints to become firm. Buff surface of grout with clean coarse cloth. Inspect joint for pinholes/voids and repair them with freshly mixed grout. Within 24 hours, check for remaining haze and remove it with warm soapy water and a nylon scrubbing pad, using a circular motion, to lightly scrub surfaces and dissolve haze/film. Do not use acid cleaners on latex Portland cement grout less than 10 days old.

EPOXY GROUTING Allow thin-body porcelain panel installation to cure minimum 48 hours at 70° F (21°C).Store liquid components of LATICRETE SpectraLOCK® PRO Premium Grout† for 24 hours @ 70-80°F (21-27°C) prior to use to facilitate mixing and application. Substrate temperature must be 40-95°F (4-35°C). Verify joints are free of dirt, debris, thin-set mortar or grout spacers. Sponge or wipe dust/dirt off panels faces and remove all water standing in joints. Apply grout release to panel faces to facilitate cleaning. Cut open pouch and pour LATICRETE SpectraLOCK PRO Premium Grout Part A Liquid into a clean mixing pail. Then open pouch and pour LATICRETE SpectraLOCK PRO Premium Grout Part B Liquid into the mixing pail. Mix by hand or with a slow speed (<300 rpm) mixer until the two liquids are well blended. Then, while mixing, add LATICRETE SpectraLOCK Grout Part C Powder and blend until uniform. For narrow joints, it is acceptable to leave out up to 10% of the LATICRETE SpectraLOCK Grout Part C Powder to produce a more fluid mix. Install LATICRETE SpectraLOCK PRO Premium Grout in compliance with current revisions of ANSI A108.02 (3.13) and ANSI A108.6 (3.0 - 4.0). Spread using a sharp edged, firm rubber float and work grout into joints. Using strokes diagonal (at 45° angle) to the grout lines, pack joints full and free of voids/pits. Then hold float face at a 90° angle to grouted surface and use float edge to "squeegee" off excess grout, stroking diagonally to avoid pulling grout out of filled joints. Once excess grout is removed, a thin film/haze will be left. Initial cleaning of the remaining film/haze can begin approximately 20 minutes after grouting (wait longer when temperatures are cooler). Begin by mixing one cleaning additive packet with 2 gallons (7.6 L) of clean water in a clean bucket to make cleaning solution. Dip a clean sponge into the bucket and then wring out cleaning solution until sponge is damp. Using a circular motion, lightly scrub grouted surfaces with the damp sponge to loosen grout film/haze. Then drag sponge diagonally over the panel surfaces to remove froth. Rinse sponge frequently and change cleaning solution at least every 50 ft2 (4.7m2). Discard sponges as they become "gummy" with residue. Check work as you clean and repair any low spots with additional grout. One (1) hour after finishing first cleaning, clean the same area again following the same procedure but utilizing a clean white scrub pad and fresh cleaning solution. Rinse scrub pad frequently. Drag a clean sponge diagonally over the panel surfaces to remove froth. Use each side of sponge only once before rinsing and change cleaning solution at least every 50 ft2 (4.7m2). Allow cleaned areas to dry and inspect panel surfaces. For persistent grout film/haze (within 24 hours), repeat scrubbing procedure with undiluted white vinegar and clean pad. Rinse with clean water and allow surface to dry. Inspect grout joint for pinholes/voids and repair them with freshly mixed LATICRETE® SpectraLOCK® PRO Premium Grout†. Cautions: Do not use acid cleaners on epoxy grout less than 7 days old.

PROTECTION The contractor must take precautions to protect the finished work from damage by other trades. Do not allow contamination on fresh grout joints. Allow the cement grout to cure for a minimum of 7 days at 70° F (21° C) before aggressive cleaning. NOTE: Steam cleaning LATICRETE® SpectraLOCK® PRO Premium Grout is not recommended. COLD WEATHER NOTE The curing of installation materials is retarded by low temperatures and finished work should be protected for an extended period of time. Refer to LATICRETE Technical Data Sheet 175. Typically, for every 18º F below 70º F (10ºC below 21ºC), installation materials take twice as long to cure.

4

HOT WEATHER NOTE The curing of installation materials is accelerated by hot temperatures. Refer to LATICRETE Technical Data Sheet 176. Typically, for every 18º F above 70º F (10ºC above 21ºC), installation materials cure twice as quickly. LATICRETE Technical Services provides review of job specifications and plans, project detail planning and review, and provides answers to questions concerning the installation of ceramic tile, brick, marble and stone. Call toll free USA +1 (203) 393-0010. Fax: USA +1 (203) 393-1684. E-mail: [email protected], Internet: www.laticrete.com. To obtain a copy of detailed product information, most recent revisions of LATICRETE data sheets, and answers to installation questions, E-mail: [email protected] or call (800) 243-4788 x.235. © 2012 LATICRETE INTERNATIONAL, Inc. The right to copy, distribute, and utilize for commercial purposes is specifically granted to Stone and Tile Importers and manufacturers, Architects, Engineers, and Specifications Writers. R September 4, 2012


http://www.laticrete.com/


color by numbers · their neighbors and lovers of their opposites,” an excellent color theory,...

Documents