colorfabric exhibit kit accessories & components
DESCRIPTION
Available Accessories and Components for Exhibit Kits. Shelves, Lighting Kits, Side Panels, everything you need to finish your Exhibit.TRANSCRIPT
ColorFabric Kits feature the most functional line of accessories possible and include profile cut substrates forming wing panels, crown panels, header graphic panels and easily attached standoff graphics.
Accessories &Components
ColorFabric LightBox Counter Kitincludes:Structure with 18” x 48” countertopLight Blanket with 5 lights9.75 sq. ft. tensioned fabric graphic$748
Inline Foot Print: 48” wide x 18” deep x 40” tall
LightBox Counter Kit
ColorFabric Kit Counter, Half Widthincludes:Structure and 24” x 18“ countertop4.5 sq. ft. infill panel$260
Optional Direct Print Graphic$54
Kit Counter, Half Width
ColorFabric Counter Kit, Half Width,Vertical Cabinetincludes: Counter structure24” x 18” countertop12” deep x 18” wide x 35.5” tall cabinet$610
Rear view
Optional Standoff GraphicDirect print to substrateincludes 4 mounting brackets$136
Counter Kit, Half Width/Vertical Cabinet
* Unit is 40” total height
ColorFabric Kit Counter, Basic Designincludes: Counter structure18” x 48” countertop9 sq. ft. infill panel$368
Optional GraphicDirect print to substrate$110
Kit Counter, Basic Design
* Unit is 40” total height
ColorFabric Kit Counter Horizontal Cabinetincludes: Counter structureSingle Horizontal Cabinet(12” deep x 18“ wide x 35.5” high)18” x 48” countertop4 sq. ft. infill panel$794
Optional Standoff GraphicDirect print to substrateGraphic is 32” wide x 15” tall$136
Rear View
Kit Counter with Horizontal Cabinet
* Unit is 40” total height
ColorFabric Kit Counter Dual Vertical Cabinetsincludes: Counter structure2 Vertical Locking Cabinets(12” deep x 18“ wide x 35.5” high)18” x 48” countertop$995
Optional Standoff GraphicDirect print to substrate32” Square & includes 4 standoff brackets$172
Rear View
Kit Counter with Dual Vertical Cabinets
* Unit is 40” total height
Note Extender Bar to get lightout over the wing panel$25 each
HiLite Light Bracket Extension
Finally a kit light that is also a design element
Kit HiLite Light
ColorFabric Kit HiLite Lightincludes: bracket$240
Each attaches to system groove.Maximum load = 34 lbs.
Garment Accessories
Garment Bar$45
Stepped Garment Bar$85
Bag Holder3” long$10
Mounts to system groove$80 each
Literature Dispenser
Right Side Mount
Center Mount
Left Side Mount
Custom Profile Cut Shapes orSpecail Colors AvailableAsk for quote
Product Display Shelves
Angled for VEE KitsWhite or Wood Grain$60
12” deep x 18” wide12” diameter
8” square
Round ShapeWhite or Wood Grain$40Square Shape
White or Wood GrainLeft or Right Mount$25
Panel / Graphic Retainers
Panel RetainerUp to 8mm panelsUsed to attach Wing Panels$28
Panel RetainerUp to 14mm panelsUsed to attach Standoff Graphics$28
Panel Retainer with SlotUp to 4mm panelsUsed to attach Standoff Graphics$56
Panel RetainerUp to 8mm panelsUsed to attach Crownor Header Panels$28
Pair of Wing Panels
Pair of panels are stacked,but not attached.
Pair of Wing Panels8mm thick substrateCustom profile cut to desired shapeSize up to 47.5” x 24”Larger sizes will not fit into kit crate
Existing exhibit structure
NOTE: add at least 25” to eachside of footprint when usingfull size pair of wing panels.
Panel RetainerUp to 8mm panels2 required per panel of pair (4)Locks into system groove
1” gap between panel and structure
Fabric Wing Panel
Hemmed pocketfor bracket
Hemmed pocketfor bracket
Fabric Graphic WingBrackets, right or leftFront or rear attachment
Custom lengths and curvesavailable upon request.
Locks into structure groove
Straight Wing Bracket, 10” @ $10 ea.
Straight Wing Bracket, 22” @ $20 ea.
Locks into structure groove
Fabric Wing Position Options
NOTE: Custom shapes and sizes available upon request
Rectangle Fabric Full 22” WingClear space between pockets22” x 92”
Rectangle Fabric 10” WingClear space between pockets10” x 92”
Tapered Fabric Full WingClear space between pockets22” x 92“ x 10” x 94” diagonal
Tapered Fabric Half WingClear space between pockets22” x 44“ x 10” x 46” diagonal
Can be positioned with 10”bracket on top or bottom, orused with Rectangle Half Wing
Rectangle Fabric Half WingClear space between pockets22” x 44”
Monitor Mount System
Front View
Rear View
Locks into system groove
Mount for 15”, 17”, 19” & 20” MonitorComes with 4 - M4 mounting screwsExtends 3” from mounting surface$50
Optional Monitor Mount Configurations
Monitor Mount AMounts direct to upright groove$50
Monitor Mount BWith lateral cantileverLength of cantilever limited to 16”Orient right or left, $70
Monitor Mount CVertically hangsLength of drop limited to 24”$70
Monitor Mount DHorizontal span$90
Upright Internal Connector
Upper Half of Spliced Upright
Depress button and slide intoUpright until button snaps into hole
Depress button and slide intoUpright until button snaps into hole
Lower Half of Spliced Upright
Upright Internal ConnectorTwo required each upright$30 each
Cross Internal Connector
Depress button and slide into CrossBeam until button snaps into hole
Depress button and slide into CrossBeam until button snaps into hole
Cross beam with locklocated on opposite end
Cross beam with locklocated on opposite end
Cross Internal ConnectorOne required each splice$32
Graphic Cable System
Left Cable Gripper Right Cable Gripper
Upper Standoff Bracket
Lower Standoff Bracket
8’ long, 1/16” cable
Graphic Cable SystemProvides the ability to float a solidsubstrate panel 2-1/2” in front of theseamless tensioned fabric graphic.
Panel is 6mm thick with direct to substrateprinting. Single panel limited to 48” x 48”size due to packing crate restrictions.
Single Graphic Cable Set:4 - Standoff brackets @ $25 ea.4 - Grippers (2 right / left per graphic) @ $18 ea.2 - 8’ long 1/16” cables @ $8 ea.
LightBox Kit
Graphic Cable System Setup
Translucent Substrate
Translucent Substrate
Typical ColorFabric LightBox Kit
Graphic Cable System Components
Graphic Cable System Standoff$25 ea.
8’ of 1/16” cable @ $1 per foot$8
Graphic Cable ExampleProfile cut 6mm sintraDirect print on substrateFloats 2.5” in front oftensioned fabric graphic
Cable Gripper for Graphic, Left or RightGrips 3mm to 6mm panel$18 ea.
Kit Cases
Case 484048” x 40” x 24” deep4 wheels, stackable$724
Case 484848” x 48” x 24” deep4 wheels, stackable$744
Case 492549” x 25” x 8” deepExpandable to 15” deep2 wheels, molded handle$220
Accessory Case 241224” x 12” x 8” deepEasily strapped to top of other cases$110