com compliant...8, 14, 16-channel discrete inputs for "dry contact" signals 8, 16-channel...
TRANSCRIPT
Programmable Automation
Controller
RoHS
Compliantcom
Sensors and I/O modules
Technical specifications
8 GSM/3G modem
Primary or secondarycommunication channel
6
1
2 3 4 5
7 8 9 10 11
4 USB 2.0 Host
3G/4G modems, printers,flash drives support
7 433 MHz Radio
Multipurpose radio transceiver to talk tothird-party proprietary wireless devices
9 Wi-Fi + BT
802.11n (up to 150Mbps)
Access point mode is supported
Bluetooth 4.0 and Bluetooth Low Energy
3 2 x Ethernet
Two Ethernet 10/100 ports to connectto IP networks and the Internet
TCP/IP, UDP, HTTP(S)
Modbus TCP, SNMP, MQTT, KNX IP
11RS-485 и RS-232
2 Power supply
7 to 36V DC
Backup power supply input
Power over Ethernet (Passive PoE)
Embedded rechargeable battery (up to 4 hours)is available as an option
10Input and Output
0-30V analog inputs
Discrete inputs
Discrete outputs (open collector)
6 multifunctional I/O ports that can function as
Up to 4 RS-485 ports
Up to two RS-232 ports
CAN port
Modbus RTU and other protocols
Linux Inside
Comes with fully Open SourceDebian Linux-based software
ARM Cortex A7 core @ 800 MHz
512 MBytes of RAM
4 GBytes of eMMC Flash storage
1
Sending SMS
GPRS (up to 80 kbit/s)
or 3G (up to 5 Mbit/s)
6 I/O Modules
Stackable I/O modules provide up to 128 additional input or output channels for the controller
22225Price per 1 unit (default list of options).Volume pricing is available.
8, 14, 16-channel discrete inputs for "dry contact" signals
8, 16-channel AC presense detectors
8, 16-channel discrete outputs based onSSR or mechanical relays
8-channel high side switching outputs
5 Extension modules
Up to two extension modules can be installed into the controller
RS-232 interface
KNX (EIB) twisted pair interface
Additional isolated RS-485
Additional 1-Wire interface
Different kinds of discrete outputs:SSR, FET, mechanical relay
Precision analog inputs for0-20mА, 4-20mA, Pt100, Pt1000
0-10V and 1-10V analog outputs
GPS/GLONASS receiver
8-channel TTL I/O port
€
It fits your needs
Micro SD card slot
Supported hardware
Modbus RTU (RS-485)6
Our own sensors, I/O and lighting control modules
Wide variety of industrial I/O modules and other equipment: S+S, Advantech and so on
Load switching
Low voltage DC loads: intermediate relays, contactors, fans, control signals
230V AC loads: contactors, underfloor heating, lighting control, fans, etc.
NTC, Pt100 and Pt1000 thermistors
Digital 1-Wire temperature sensors
Wired sensors
Analog sensors with both voltage output(up to 30V) and current output (0-20mA)
Discrete output : smoke detectors, water leak sensors, motion detectors
Reed contacts, anti-tamper switches
6
KNX (EIB)
Supports both KNX TP (KNX bus) and KNX/IP
Wide variety of devices for home and building automation
Acts as a KNX-IP Gateway
6
M-Bus Meters
M-Bus bus master interface
Electricity, heat and gas meters
Wireless M-Bus (work in progress)
6
Z-Wave
Certified software stack supporting Z-Wave Plus
More than 1000 compatible wireless devices
Graphical User Interfaces
Wiren Board Inspektor SCADASimple cloud SCADA, deployed in 5 minutes
Apple HomeKitFull control for your iPhone
Modbus TCPAccess all Wiren Board data using Modbus TCP, from any SCADA
6
Web
Interface
Easy access from local network, includingfrom mobile devices
View and manage all connected devices
Rooms and dashboards
Rule
Engine
Event-based scenarios
Timers and Schedules
Knowledge base with ready-madesolutions
Additional
functions
Email and SMS notifications
Data logging
SNMP support (both client and server)
Zabbix and othermonitoring software
Modbus I/O Modules
Relay outputs are equipped with arc suppression circuits.Discrete inputs can be used to directly control relay outputs or as general-purpose inputs
WB-MR6C Module
▪ 6 relay channels 10A 230VAC
▪ 7 isolated discrete inputs
▪ two independent output groups
▪ loads can be controlled from local inputs
▪ DIN-rail mount, 3U
▪ Control highly capacitive and inductive loads without contactors
WB-MR6xV
Sixchannels
WB-MR3xV
Three channels
High Inrush Current Relay Modules
▪ Fluorescent lamps
▪ Incandescent lamps
▪ LED lighting
▪ Switching power supplies
▪ HVAC systems
50 €
90 €45 €
▪ Rated load is 10A per channel
▪ Inrush current is up to 800A!
▪ N+1 isolated discrete inputs (230VAC or "dry contact")
Lighting control
Load can be switched on and off via local switches or remotely viaRS-485 Modbus RTU.
WB-MR2-mini
▪ Two relay outputs
▪ 230VAC, 5A per ch.
▪ 2 discrete inputs for direct control
▪ Size: 46×22×20 mm
WB-RGB dimmer
▪ RGB LED strip dimmer (constant voltage)
▪ Three channels, 3A per channel
▪ No flickering (24 kHz)
▪ 2 inputs for local hue and brightness control
▪ Size: 55×30×10 mm
€ 30
WB-MAO4 0-10V dimmer
▪ Controls dimmable LED, dimmable ballasts, triac heating controllers, etc.
▪ Four channels
▪ 0-10V and PWM output
▪ 3 discrete inputs for local control
▪ Size: 65×35×7 mm
€ 50
€ 35
Flush-mounted modules
WB-MD2 AC Dimmer
▪ Two output channels (500W each)
▪ 5 isolated discrete inputs
▪ Utilizes MOSFET technology
▪ Both rising-edge and trailing-edge dimming
▪ Suitable for LED lighting
▪ Loads can be dimmed using local inputs
▪ DIN-rail mount, 3U
90 €
Trailing-Edge AC Dimmer
Sensors
€90
€165with CO2
w/o CO2
WB-MSW2
All-in-one sensor with Modbus RTU for indoor use
Temperature and humidity
Illuminance (lux)Noise level
CO2 concentrationUp to 2 external temperature sensors
€80
€65Temperature andhumidity only
Full set
WB-MS
Compact sensor with Modbus RTU.Wall- and DIN-rail mounted
Temperature and humidityIlluminance (lux)Noise levelUp to 2 external temperature sensors
€50
WB-MSGR
Gas sensor with Modbus RTU. Wall- and DIN-rail mounted
Replaceable semiconductor gas sensorSensors available: combustible gases,ethanol, methane, carbon monoxide,hydrogen, ammonia, freons, etc.
Relay output
Built-in buzzer and status lights
WB-MCM16
16-Ch Counter Module
▪ Collects readings from water, energy and gas meters
▪ 16 dicrete/counter inputs
▪ Suitable for dry contact and open collector outputs
▪ Counter overflow protection
▪ DIN rail-mount (3 modules)
6
WB-MAP12H
Multi-Channel Energy Meter
▪ Energy management and power quality monitoring ideal for multi-tenant facilities, data centers and smart offices
▪ Four 3-phase circuits or 12 single-phase circuits
▪ Current measurement via split-core current transformers
▪ DIN-rail mount (6 modules)
▪ RMS voltage, current and power measurements
▪ Active, reactive and apparent energy metering
▪ Fundamental and harmonic energy metering
▪ Measures THD and up to 40 harmonic components
6
€ 235
Smart Metering
€ 80
Building and home automation
Wiren Board PAC, I/O modules and sensors are used to control lighting, HVAC, humidity systems in a building, as well as security, fire and flood safety.
Building management system for bank branches(Moscow, St. Petersburg)
Wiren Board sensors and bank own software both provide a comfortable environment for employees and customers, including temperature and humidity, illuminance, carbon dioxide (CO2) concentration. Collecting data from electricity, water and heat meters help to identify energy-inefficient branches and decrease their consumption after engineering systems optimization.
Wiren Board PAC and I/O modules allow to control lighting (including scenarios-based) and HVAC in every apartment. The PAC also controls the water leak and security system detectors.Apple iPads with Iridium Mobile UI are used as HMI.
Home automation for300 apartments in Skolkovoresidential complex
Located all over Kazakhstan, TV retransmission stations are full of complex TV equipment as well as uninterruptible power supplies and sensors. Special version of Wiren Board PAC controls the state of every device, also able to turn it on or off.
Control of digital TV retransmission stations
Wiren Board stays alive even after UPS goes off, having its own battery. Controller's GPRS link is totally independent from main communication channel. Altogether it allows to send signal about every dangerous situation.
Wiren Board PAC controls variable frequency drives (VFD) used in oil rig.There is highly specialized software named KLogic installed on the controllers. Altogether they form a distributed data collection and management system.Control stations are polled using Modbus RTU protocol.
Control of oil wells (Azerbaijan)
Oil rig control station.Binagadi field, Azerbaijan
Reliable control for extreme applications
RoHSCompliant
About us
Wiren Board is a company based in Moscow, Russia. Since 2012 we design and manufacture electronics for automation and monitoring. Our goal is to make industrial-grade reliability and quality affordable for more customers.
The company is focused on developing its Linux-based embedded controllers (PACs) as well as Modbus actuators and sensors.
Our products are used mostly in commercial and residental building automation, IT infrastructure monitoring and environment monitoring.
Today Wiren Board is a great team of more than 20 highly skilled professionals that includes electronic engineers, embedded software developers, QA and production engineers.
We manufacture tens of thousands of sophisticated devices per year. To ensure the outstanding quality of our products we supervise or directly perform all the crucial steps in production process, including parts sourcing, functional testing and final assembly. All our devices are 100% tested on one-by-one basis using specially designed state-of-art automated testing equipment. The products comply with safety regulations, including RoHS.
com
Contacts
Wiren Board
1 Pervomayskaya street,Dolgoprudny, Moscow region,141701 Russia.
http://[email protected]
Export sales department: [email protected] support in English: [email protected]