coming incubator monitoring made soon! simple – all ... · innovation – a compact sensor for...
TRANSCRIPT
INCUBATOR MONITORING MADE SIMPLE – ALL MEASUREMENTS IN ONE SENSORThe Log&Guard monitoring system sets the standard for automated quality assurance. Specifi cally developed for IVF, it’s trusted by clinics worldwide to boost effi ciency and productivity. Now we are proud to introduce the latest innovation – a compact sensor for 24/7 monitoring of all critical incubator parameters.
Coming soon!
Sensing head60 x 40 x 15 mm
Wireless transmitter
Ultra fl at ribbon cable
Socket for connecting incubator’s
alarm contact
Unique technology to secure your embryo cultureOur new sensor for Log&Guard is a world fi rst and unique of its kind. The Universal Sensor for Embryo Culture lets you monitor critical parameters for embryo culture (temperature, CO
2 and relative humidity) with just one device.
Thanks to its compact size, the sensor fi ts most box and benchtop incubators.
For an additional layer of safety, you can connect the sensor to the incubator’s integrated alarm, so that alarms are relayed to the Log&Guard controller. Comprehensive embryo culture monitoring has never been easier!
Just plug and playYou can easily add the new sensor to any existing Log&Guard monitoring network with a controller that supports wireless data transmission. The system collects and displays the sensor data and will send text message alerts in case of an incubator malfunction.
• Monitor temperature, CO2
and RH with just one sensor
• Compact footprint
• Fits both box and benchtop incubators
• Easy to install
• Wireless data transfer
Wireless transmitter: Magnetic mounting for attachment to incubator housing. Socket for connecting incubator alarm.
Ultra-fl at ribbon cable: Extendible to suit different incubator types.
Compact sensing head: 60 x 40 x 15 mm. To be placed inside the incubator.
© V
itrol
ife G
roup
20
20
. RE
F 1
91
50
. Dat
e of
issu
e 2
02
00
61
7.
Vitrolife Sweden AB . Box 9080 . SE-400 92 Göteborg . Sweden . Tel +46 31 721 80 00 . [email protected] . www.vitrolife.com
Note: The product shown on this fl yer might not be available in all markets.
Contact your sales representative for more information.
SMALL SIZE. GREAT POSSIBILITIES.
• Unique three-in-one technologyAll key parameters in one sensor – temperature, CO
2, relative
humidity. Measurements are taken frequently and transmitted wirelessly to the Log&Guard controller.
• Universal fitHighly compact sensor head (60 x 40 x 15 mm) fits almost all box and benchtop incubators. Thanks to an ultra-flat ribbon cable, it’s compatible with flat culture chambers and all types of door and chamber seal.
• Easy to installIntegrated plug-and-play solution with fewer components.
• No access port required The flat ribbon cable goes
through the door seal, eliminating the need for an access port.
• Wireless data transfer No more cables – data is sent wirelessly to the Log&Guard controller via an integrated transmitter.
• Dual-layer safetySeparate port for connecting the incubator’s alarm relay contact. Internal alarm status is transmitted wirelessly to the Log&Guard controller and documented in the software. The system sends text message alerts in the event of an alarm.
• Cost-effectiveEverything included in one compact device; no separate wireless hub or additional sensors required.
Technical data
Operating temperature20–50°C. Not suitable for auto-decontamination!
CO2
Dual beam infrared technology for robust and precise CO
2
measurement. Measuring range 0–10%, accuracy +/- 0.18% at 5% concentration, resolution 0.1%
TemperatureMeasuring range -40 to +125°C, accuracy +/- 0.2°C, resolution 0.01°C
Relative HumidityMeasuring range 0–100%, accuracy +/- 2 %, resolution 0.01%. Response time/equilibration: 12 h
The Universal Sensor for Embryo Culture brings many advantages
Coming soon!