commercial body fittings 8th edition shutter spares...

235

Commercial Body Fittings – 8th Edition

Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603 Coseley tel +44 (0)121 520 0100 fax +44 (0)121 522 3889 website www.cbf.uk.com e-mail: [email protected]

SHUTTER SPARES SIDEGUARD SYSTEMS

The fitment of Lateral Protection (Sideguard) Systems is a mandatory requirement on all new vehicles (where permissible), over 3500kg. The ASGK990 Series is extremely robust, with its durable hot dipped galvanized legs (500 Hours salt spray tested) and anodized aluminium rail.The ASGK990 Series offers a pracitical and affordable solution to the body building and repair industry.

l Tested and approved by The V.C.A.l All ASGK990 components can be bought individually, making the ordering process simplel Available with three different length legsl Fixed and hinged systems availablel Meets all the mandatory requirements of 'Whole Vehicle Type Approval' (UNECE Regulation 73)l Legs and rail are clearly marked with the 'E' approval marking (E11 73R-011005)l Single and double pedestrian guard kits to suit, available from stockl All hinged legs are 500 Hours salt spray testedl 'E' Approval certificate and full mounting instructions available upon request

Lateral Protection SystemASGK990 Series

UNECE Regulation 73 Compliant

E11 73R-011005



236 Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603 Coseley tel +44 (0)121 520 0100 fax +44 (0)121 522 3889 website www.cbf.uk.com e-mail: [email protected]

SIDEGUARD SYSTEMSLateral Protection System

ASGK990 Series Hinged Sideguard Legs

Hinged sideguard legs are most commonly used in lateral protection systems, the pin can simply be removed allowing the leg to pivot on the fixed bolt. The system can then be lifted clear from the underside of the vehicle, the pin is then re-inserted to hold at the desired angle/height.

No. ASGK990/560AGV/73R 560/595mm Overall lengthwgt. 3.25kg



l Robust hot dip galvanized finishl Complete with pin & wire assemblyl 500 Hours salt spray testedl Sold individuallyl Supplied pre-assembledl High tensile bolts required for mounting for full information refer to mounting requirements – P237

No. ASGK990/700FBGV/73R 700/735mm Overall lengthwgt. 3.95kg

l As standard range, but fully bolted (2 tightened bolts, no pin & wire assembly)


Chassis Mounted Sideguard Support Beam

No. ASGK990/900SAGV/73R wgt. 5.16kg

l UNECE Regulation 73 compliant when used in conjunction with ASGK990 Series hinged legs and sideguard rail Full documents available upon requestl Ideally suited for fridge vehicles, tippers and where conventional hinged legs cannot be mounted l Designed to suit standard chassis widths, (Support beam can be 'cut down' to the required length)l Robust designl Fully galvanizedl Excellent corrosion resistance – 500 Hours salt spray testedl Full fitting instructions available upon request

l Each kit consists of: 1 x Chassis Bracket W150 x D100 x L200mm 1 x Support Beam W53 x D50 x L900mm

200

150

100

ChassisBracket

900

Support Beam

E11 Approved

E11 Approved

Support beam complete with

ASGK990 Sideguard leg attached

Fully bolted version

56

0/7

00

/76

0m

m

35

Pin & wire assembly

237



SIDEGUARD SYSTEMS SIDEGUARD SYSTEMSLateral Protection System

ASGK990 Series Anodised Aluminium Rail

No. ASGK990/3000AR/73R 3000mmwgt. 3.60kgNo. ASGK990/3200AR/73R 3200mmwgt. 3.84kgNo. ASGK990/3400AR/73R 3400mmwgt. 4.08kgNo. ASGK990/4000AR/73R 4000mmwgt. 4.80kgNo. ASGK990/5000AR/73R 5000mmwgt. 6.00kgNo. ASGK990/6000AR/73R 6000mmwgt. 7.20kg

l W101.5 x D30.5 x 1.5mm Anodised Aluminiuml Single Bolt Fixing

101.5

30.5

101.5

30.5


Pedestrian End Rail Kits100

100

50

ASGK990 Mounting Requirements

Single

No. ASGK100/2/SPGK wgt. 0.55kg2 x 100mm Anodised Aluminium Pedestrian Guards2 x ASGK10030/EC Rail End Caps2 x ASGK1188/TPGC Top Pedestrian Guard Cover2 x ASGK1189/BPGC Bottom Pedestrian Guard Cover4 x M8 x 24mm Rail Mounting Bolts, Nyloc Nuts & Washers4 x 4.8mm x 12mm Guard Attachment Rivets SparesNo. ASGK10030/EC Rail end capNo. ASGK1188/TPGC Top pedestrian guard coverNo. ASGK1189/BPGC Bottom pedestrian guard cover

Double

No. ASGK500/2/DPGK wgt. 2.11kg2 x 500mm Anodised Aluminium Pedestrian Guards4 x ASGK10030/EC Rail End Caps2 x ASGK1188/TPGC Top Pedestrian Guard Cover Plates2 x ASGK1189/BPGC Bottom Pedestrian Guard Cover Plates8 x M8 x 24mm Rail Mounting Bolts, Nyloc Nuts & Washers8 x 4.8mm x 12mm Guard Attachment Rivets

* A minimum of 3 legs will be required if the overall length of rail exceeds 3950mm (3850mm where the overall leg length exceeds 735mm)** Please note: when overall leg exceeds 735mm, the rear- most over-hang MUST be reduced from 250 to 150mm

DGVW = Design Gross Vehicle Weight TAW = Total Axle Weight

Class 03 – 3.5T to 10T TAWClass 04 – over 10T TAW

Class N2 – 3.5T to 12T DGVWClass N3 – over 12T DGVW

All vehicle classes

l This information is for guideline purposes only. Please refer to UNECE Regulation 73 for up-to-date amendments & specifications

E11 73R-011005

ASGK10030/EC ASGK1188/TPGCASGK1189/BPGC



238 Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603 Coseley tel +44 (0)121 520 0100 fax +44 (0)121 522 3889 website www.cbf.uk.com e-mail: [email protected]

SIDEGUARD SYSTEMS

IMPORTANT NOTEZinc plating is only classed as a ‘sacrificial’ coating (gives itself up to the corrosive media)A protective barrier (i.e. paint) is recommended to protect against moistureCBF cannot be held responsible for the effects of corrosion on zinc plated parts

Hinged Sideguard LegsASGK991 SeriesBright Zinc Plated

No. ASGK991/572ZP 537/572mm Overall length wgt. 2.19kg

No. ASGK991/735ZP 700/735mm Overall length wgt. 2.95kg

l Bright zinc plated finishl Plastic 'clip' retaining mechanisml Sold singlyl Pre-assembled / Labour saving

Hinged Sideguard LegsASGK991 Series

Black Powder Coated

Hinged Sideguard LegsASGK991 SeriesStainless Steel

No. ASGK991/430BLK 395/430mm Overall length wgt. 2.00kg



l Robust powder coatedl Plastic 'clip' retaining mechanisml Sold singlyl Pre-assembled / Labour saving

No. ASGK991/572SS 537/572mm Overall length wgt. 1.50kg

No. ASGK991/735SS 700/735mm Overall length wgt. 1.70kg

l Corrosion resistant stainless steell Plastic 'clip' retaining mechanisml Sold singlyl Pre-assembled / Labour saving Locking Mechanism

35

395537700

35

537700

Locking Mechanism

Locking Mechanism

35

537700

commercial body fittings 8th edition shutter spares...

Documents