commercial duty plenum fans - industrial and …€¦ · 5 2twin wctnyfaa&cwinbll application...

16
COMMERCIAL DUTY PLENUM FANS TYPE EPLFN | TYPE EPLQN Defining Innovation. BULLETIN 455 November 2011

Upload: lecong

Post on 08-Aug-2018

213 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: COMMERCIAL DUTY pLEnUM fAns - Industrial and …€¦ · 5 2Twin wCtnyFaa&CwinBll Application Guidelines Fan Selection Recommendations 1. System effect losses (see AMCA 201) and ple-num

COMMERCIAL DUTY pLEnUM fAnsTYpE EpLfn | TYpE EpLQn

Defining Innovation.

BULLETIN 455November 2011

Page 2: COMMERCIAL DUTY pLEnUM fAns - Industrial and …€¦ · 5 2Twin wCtnyFaa&CwinBll Application Guidelines Fan Selection Recommendations 1. System effect losses (see AMCA 201) and ple-num

Twin City Bulletin 4552

Commercial Duty Plenum FansTwin City Fan & Blower’s models EPLFN and EPLQN commercial duty plenum fans incorporate the same performance and quality characteristics of the E-Series plenum fans, but in a lighter duty, more economical design. The EPLFN and EPLQN offer a competitive cost advantage over full-framed plenum fan designs in light to medium duty applications with static pressures of 8.5" w.g. or less.

The compact direct drive EPLFN and EPLQN offers reduced maintenance by eliminating shafts, bearings and V-belt drives. The EPLFN and EPLQN are a great choice for applications requiring clean airstreams as there is no belt residue in the airstream. The arrange-ment 4 configuration offers space savings with a reduced fan footprint. Different performance points can be achieved either through wheel width reduction or varying motor speeds. Models EPLFN and EPLQN are AMCA certified for Sound and Air.

EPLFNThe model EPLFN features a highly efficient and cost effective, 9-bladed airfoil wheel design. The high ef-ficiency of the EPLFN will often allow the use of smaller fans without increasing power requirements.

EPLQNThe Better Sound Quality model EPLQN features a 12-bladed airfoil wheel design that flattens the sound spectrum and reduces the dominance of pure tones.

Capabilities & Features• 14 sizes from 12.4" to 49.0" wheel diameters• High efficient 9 and 12 bladed airfoil wheels• Class II construction• Arrangement 4 direct drive • Capacities from 1,000 to 68,800 CFM• Static pressures to 8.5" w.g.

©2011 Twin City Fan Companies, Ltd. All rights reserved throughout the world.

Bulletin illustrations cover the general appearance of Twin City Fan & Blower products at the time ofpublication and we reserve the right to make changes in design and construction at any time without notice.

Twin City Fan & Blower certifies that the Type EPLFN and Type EPLQN Plenum Fans shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.

Refer to Bulletin 475 for sound power levels.

Twin City Fan & Blower is a registered member of the USGBC, a non-profit community of lead-ers working to make green buildings available to everyone within a generation.

Arrg. 4 EPLFN Plenum Fan

Page 3: COMMERCIAL DUTY pLEnUM fAns - Industrial and …€¦ · 5 2Twin wCtnyFaa&CwinBll Application Guidelines Fan Selection Recommendations 1. System effect losses (see AMCA 201) and ple-num

Twin City Bulletin 4553

WheelsHigh efficiency, non-overloading airfoil wheels are pro-vided on all EPLFN and EPLQN fan sizes. Aluminum wheels are standard on all sizes. All wheels balanced to level G6.3.

Inlet ConesHeavy-gauge, spun steel inlet cones are closely matched to the wheel intake rim to ensure efficient and quiet operation.

Inlet PlateFan inlet cones shall mount to heavy-gauge steel inlet plate. A steel lip suitable for attachment of a boot connector shall surround the unit.

Construction FeaturesFrameModels EPLFN and EPLQN feature heavy-gauge galvanized or finish painted steel mounting rails and motor mount for strength and rigidity in direct drive applications.

Mechanical Run TestAll fans are assembled for a mechanical run test and final balance prior to shipment. Vibration readings are taken in the axial, horizontal and vertical direction at the specified speed. Fans are balanced to 0.15 in./sec. peak or less.

AMCA Sound and Air CertificationModels EPLFN and EPLQN have been designed and tested per AMCA standards. The AMCA logo provides assurance that the fan sound and air levels will match cataloged values.

Arrangement 4 (Horizontal)Direct drive Arrangement 4 mounts the fan wheel directly onto the motor shaft. This arrangement provides a compact fan/motor unit which eliminates belt residue and requires less maintenance than other arrangements.

For these reasons, Arrangement 4 plenum fans are widely used in cleanroom, pharmaceutical, and other critical applications.

Fans can be selected with varying wheel widths to provide desired performance at direct drive motor speeds. Performance changes in the field are usually achieved by means of a VFD.

Arrangements

Application InformationPlenum fans are unhoused fans designed to operate inside of field-fabricated or factory-built air handling units.

The fan wheel pressurizes the entire surrounding air plenum in which the fan is installed, allowing air ducts from any direction to be directly connected to the air handling unit enclosure. This design generally saves space by eliminating the fan housing, transi-tions, and diffusers within the air handling unit.

Plenum fans have found a ready acceptance in the air conditioning industry. In addition, the construction versatility, adaptability in the direction of the discharg-

es, suitability for internal isolation and application of sound panels, and generally lower cost makes it a very popular fan arrangement.

Benefits of a Plenum FanSaves Space – There are no housings, transitions, or diffusers within the air handling unit.

Efficiency – Plenum fans can be as efficient or more efficient than scroll type fans at specific operating points towards the bottom of the fan curve.

Lower cost – Plenum fans are less expensive than scroll type fans.

Page 4: COMMERCIAL DUTY pLEnUM fAns - Industrial and …€¦ · 5 2Twin wCtnyFaa&CwinBll Application Guidelines Fan Selection Recommendations 1. System effect losses (see AMCA 201) and ple-num

Twin City Bulletin 4554

Protective EnclosureGrill style protective enclosure completely encloses all sides and the back of the fan wheel to protect personnel from moving fan parts. The panels are individually removable to provide access to the wheel for service or inspection. Protective enclosures are plated wire.

AccessoriesPiezometer Ring (Airflow Measuring System)A piezometer ring is available on plenum fans, as well as other Twin City Fan housed fans, as part of an airflow measuring system, based on the principle of a flow nozzle. The inlet cone of the fan is used as the flow nozzle. The flow can be calculated by measuring the pressure drop through the inlet cone. No tubes or sensors are inserted in the high velocity airstream which could obstruct airflow. The system, consists of a piezometer ring mounted at the throat and a static pressure tap mounted on the face of the inlet cone. A differential pressure transducer and digital display can also be provided. The pressure drop is measured from the tap locat-ed on the face of the inlet cone to the piezometer ring in the throat. The inlet tap is connected to the high-pressure side of the transducer and the piezom-eter ring is connected to the low-pressure side. See diagram below.

Based on Twin City Fan laboratory tests, the system was determined to be accurate within +/-5%. Refer to Twin City Fan Engineering Supplement ES-105. NOTE: Twin City Fan does not recommend place-ment of flow measuring probes inside the fan inlet cone in the path of airflow. These devices create disturbances and unpredictable performance losses. Twin City Fan will not be responsible for loss of per-formance due to such devices.

Inlet ScreenHeavy-gauge screen mounted to fan inlet for easy removal.

Vibration Isolation PadsSpring type vibration isolation mounting pads are available to reduce the transmission of fan vibration in 1" or 2" deflection.

Piezometer Ring Mounted at Throat of Inlet Cone

HIGH PRESSURE SIDE

LOW PRESSURE SIDE

STATIC PRESSURE TAP

PIEZOMETER RING

Page 5: COMMERCIAL DUTY pLEnUM fAns - Industrial and …€¦ · 5 2Twin wCtnyFaa&CwinBll Application Guidelines Fan Selection Recommendations 1. System effect losses (see AMCA 201) and ple-num

Twin City Bulletin 4555

Application GuidelinesFan Selection Recommendations1. System effect losses (see AMCA 201) and ple-

num losses should be estimated and added to the required static pressure, prior to making selections. Refer to AMCA Publication 201 at www.amca.org and Twin City Fan Engineering Data Letter “Fan Performance Troubleshooting Guide” (ED-100) at www.tcf.com.

2. Fans should be selected so that the point of operation is approximately between 55% and 90% of the free delivery point on the fan curve.

3. Avoid selections over 4000 RPM. A narrow width, larger size impeller can be used to avoid this.

4. Where flow monitoring is required, use a piezom-eter ring or externally mounted flow measurement station. Fan performance may be substantially affected by flow measurement probes mounted directly in the fan inlet cone. Refer to page 4.

5. For direct drive fans without speed control (or where speed control cannot exceed 60 Hz), select fans at 3 – 5% below the nominal speed of the motor. This will normally cover the uncertainties associated with the system and air balancer’s measurements. Select motors loaded no closer than 90% of the maximum loading of the motor.

6. For multiple fans in a plenum, alternate CW and CCW rotation fans to minimize losses. If fans are not counter-rotating, install walls between each fan to create cells in the outlet plenum.

7. Add losses for duct take-offs per the chart above to pressure requirements of the fan. Bellmouth entries will always reduce losses and are recommended.

To achieve the air velocity in the discharge duct and overcome the loss associated with the air entering the ductwork, additional resistance must be added to the external static pressure (ESP) requirements of the fan. Different types of duct entrances and locations will require varying correction factors. Therefore, prior to select-ing a fan, make the following correction, depending upon the type of duct and its location.

ADDITIONAL DUCT ENTRANCE LOSS TO BE ADDED TO FAN ESP

DISCHARGE TYPE CORRECTION FACTOR

Duct Entrance Losses From Plenum Fan Cabinet

Example: A system requires 30,000 CFM at 5" SP at standard air density with one 4 ft diameter duct with bell-mouth placed in a radial discharge. Determine RPM and brake horsepower:

Flow Parallel To Fan Shaft

Radial Discharge

Without Bellmouth

Bellmouth

Radial Discharge Without Duct or Bellmouth

● Radial and ducted with bellmouth● Radial and ducted without bellmouth● Radial without duct or bellmouth● Flow parallel to shaft and ducted with bellmouth● Flow parallel to shaft and ducted without bellmouth● Flow parallel to shaft without duct or bellmouth

1.1 x Duct Velocity Pressure1.4 x Duct Velocity Pressure1.8 x Duct Velocity Pressure1.6 x Duct Velocity Pressure1.9 x Duct Velocity Pressure2.4 x Duct Velocity Pressure

Duct area = (42 x ρ) ÷ 4 = 12.57 ft2

Duct velocity = 30,000 ÷ 12.57 = 2387 FPM

Duct velocity pressure = (2387 ÷ 4005)2 = 0.355 @ std. cond.

Entrance loss correction factor = 1.1 x duct velocity pressure = 1.1 x 0.355 = 0.39

Thus, select the fan for = 5" + 0.39" = 5.39" S.P.

Page 6: COMMERCIAL DUTY pLEnUM fAns - Industrial and …€¦ · 5 2Twin wCtnyFaa&CwinBll Application Guidelines Fan Selection Recommendations 1. System effect losses (see AMCA 201) and ple-num

Twin City Bulletin 4556

BAFFLE

AIRFLOW

Figure 2. Flow Baffle and Vortex Spin Breaker Location

TWO FANS THREE FANS

H

H / 2

W / 2

W / 6

W'W' MINIMUM = 6D

W / 6

H

H / 2

W / 4

W'W' MINIMUM = 4D

W / 4'H' MINIMUM

= 2D'H' MINIMUM

= 2D

D D D D D

Figure 3. Location of Counter-Rotating Fans

(A-D)/2, BUT NOTLESS THAN 'D'

('E' MINIMUM = 'D')

B E

A

A/2

CL

45MAX

O

D/2 MINIMUMRECOMMENDED

C

D

TAKE-OFFSPAST PLANE OFFAN IMPELLER

Figure 1. Recommended Location of Fan in Plenum

NOTE: ‘D’= Wheel diameter

INLET SPINBREAKER

ACCESSORY

D/2

D

D

AIRFLOWDIRECTION

Location and Placement of Fans in Air Handlers1. Center the fan inlets in both the horizontal and

vertical planes.2. For inlet clearance, see Figure 1. The flow should

converge at an angle not greater than 45° when approaching the opening for the fan inlet. A minimum of one fan wheel diameter clearance is recommended.

3. In the fan outlet plenum, a minimum wall clear-ance of one-half fan wheel diameter to the periph-ery of the fan wheel is recommended.

4. Figure 1 shows that the minimum clearance between the back of the fan wheel and the near-est component downstream (Dim. E) should be one wheel diameter. Small clearances do not allow the flow to equalize behind the fan wheel and the pressure drop of the downstream component is increased.

5. When the flow enters the inlet plenum perpen-dicular to the fan/motor shaft, large system effect losses can occur. See Figure 2 for a recom-

mended flow baffle or a vortex breaker that may help preserve rated fan performance.

6. When two or more fans are installed in a plenum, divide the plenum into imaginary cells of equal area. Center the fan inlets on each cell. See Figure 3.

Installation Recommendations1. Install the fan so the flexible connector on the inlet

remains uncollapsed during operation.2. Install thrust restraints (snubbers) to maintain the

axial position of the fan when it is generating pressure.

3. Peripheral equipment, such as electrical compo-nents, inverters, control panels, etc., should be positioned away from the high velocity air entering or leaving the fan.

4. Adjust springs on the isolation base so that spring deflection is approximately equal for all isolators.

5. Follow safety, installation, start-up, and mainte-nance instructions supplied with each fan.

Page 7: COMMERCIAL DUTY pLEnUM fAns - Industrial and …€¦ · 5 2Twin wCtnyFaa&CwinBll Application Guidelines Fan Selection Recommendations 1. System effect losses (see AMCA 201) and ple-num

Twin City Bulletin 4557

Wheel Diameter: 12.38" Fan Efficiency Grade = FEG75122 EPLFN (9-Blade)

Performance Data

Performance certified is for installation Type A; Free inlet, Free outlet.Power rating (BHP) does not include transmission losses.Performance ratings do not include the effects of appurtenances (accessories).Underlined figures indicate Maximum Static Efficiency.

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP1000 834 1660 0.25 1908 0.38 2151 0.541225 1022 1831 0.32 2033 0.46 2236 0.62 2438 0.80 2635 0.991450 1210 2005 0.40 2203 0.56 2373 0.73 2542 0.91 2714 1.11 3051 1.541675 1398 2185 0.49 2377 0.67 2544 0.86 2692 1.05 2837 1.25 3135 1.70 3428 2.20 3715 2.741900 1585 2378 0.60 2553 0.81 2718 1.01 2866 1.22 2999 1.44 3255 1.90 3517 2.41 3777 2.962125 1773 2579 0.72 2738 0.96 2893 1.18 3040 1.42 3174 1.65 3410 2.13 3639 2.65 3874 3.222350 1961 2784 0.87 2932 1.12 3075 1.38 3214 1.63 3347 1.89 3584 2.41 3794 2.95 4000 3.522575 2148 2993 1.03 3133 1.30 3265 1.59 3395 1.87 3522 2.14 3758 2.71 3966 3.292800 2336 3204 1.22 3338 1.51 3462 1.81 3583 2.12 3702 2.43 3931 3.033025 2524 3416 1.44 3546 1.75 3665 2.07 3778 2.40 3889 2.733250 2712 3630 1.68 3756 2.01 3870 2.35 3978 2.703475 2899 3846 1.96 3967 2.30

Outlet Area = 1.20 ft2 Max. BHP = 0.055 x (RPM / 1000)3

Wheel Diameter: 12.38" Fan Efficiency Grade = FEG71122 EPLQN (12-Blade)

Outlet Area = 1.20 ft2 Max. BHP = 0.062 x (RPM / 1000)3

Wheel Diameter: 14.00" Fan Efficiency Grade = FEG75150 EPLFN (9-Blade)

Outlet Area = 1.54 ft2 Max. BHP = 0.102 x (RPM / 1000)3

Wheel Diameter: 14.00" Fan Efficiency Grade = FEG71150 EPLQN (12-Blade)

Outlet Area = 1.54 ft2 Max. BHP = 0.115 x (RPM / 1000)3

MAXIMUM RPM: Class II = 4000

MAXIMUM RPM: Class II = 4000

MAXIMUM RPM: Class II = 3909

MAXIMUM RPM: Class II = 3909

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP1000 834 1644 0.27 1855 0.39 2046 0.531225 1022 1819 0.35 2014 0.50 2191 0.65 2351 0.81 2506 0.981450 1210 2004 0.44 2188 0.61 2352 0.79 2505 0.96 2648 1.15 2913 1.541675 1398 2195 0.54 2371 0.74 2527 0.95 2671 1.15 2806 1.35 3058 1.76 3288 2.21 3517 2.691900 1585 2388 0.66 2560 0.89 2709 1.12 2847 1.35 2976 1.58 3215 2.03 3438 2.50 3643 3.00 3843 3.532125 1773 2586 0.80 2752 1.05 2897 1.30 3029 1.56 3153 1.82 3384 2.33 3595 2.83 3796 3.36 3984 3.922350 1961 2792 0.97 2945 1.24 3089 1.51 3218 1.79 3337 2.08 3559 2.65 3763 3.21 3954 3.772575 2148 3005 1.17 3143 1.45 3281 1.75 3409 2.05 3525 2.36 3739 2.98 3938 3.612800 2336 3222 1.40 3347 1.69 3475 2.00 3600 2.34 3717 2.67 3925 3.343025 2524 3443 1.67 3558 1.97 3675 2.30 3794 2.65 3908 3.003250 2712 3666 1.98 3773 2.29 3881 2.63 3991 2.993475 2899 3891 2.32 3991 2.66

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP1200 781 1433 0.30 1666 0.471550 1009 1610 0.40 1790 0.58 1971 0.78 2152 1.01 2327 1.251900 1236 1797 0.53 1973 0.74 2121 0.95 2266 1.19 2415 1.44 2708 2.002250 1464 1995 0.68 2160 0.92 2308 1.17 2438 1.42 2559 1.69 2808 2.27 3057 2.91 3301 3.602600 1692 2207 0.86 2353 1.14 2495 1.42 2626 1.71 2743 2.00 2956 2.60 3171 3.26 3388 3.98 3602 4.74 3812 5.552950 1920 2427 1.07 2559 1.39 2688 1.71 2813 2.03 2930 2.35 3139 3.01 3327 3.69 3514 4.42 3705 5.20 3896 6.043300 2147 2651 1.32 2775 1.67 2891 2.03 3006 2.39 3118 2.75 3327 3.47 3511 4.21 3679 4.97 3845 5.763650 2375 2878 1.62 2996 2.00 3105 2.40 3209 2.80 3313 3.19 3514 3.98 3699 4.79 3865 5.604000 2603 3107 1.98 3220 2.38 3323 2.80 3421 3.24 3516 3.68 3705 4.55 3885 5.414350 2831 3338 2.38 3447 2.82 3546 3.27 3639 3.74 3728 4.21 3903 5.164700 3058 3572 2.85 3675 3.32 3771 3.80 3860 4.295050 3286 3807 3.39 3905 3.88

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP1200 781 1414 0.32 1604 0.47 1786 0.651550 1009 1599 0.44 1773 0.63 1929 0.82 2071 1.02 2210 1.241900 1236 1799 0.58 1960 0.81 2104 1.04 2237 1.26 2364 1.50 2594 2.01 2825 2.562250 1464 2005 0.75 2159 1.02 2294 1.29 2420 1.56 2537 1.83 2756 2.38 2956 2.96 3146 3.58 3343 4.252600 1692 2215 0.95 2364 1.26 2494 1.57 2612 1.88 2724 2.20 2930 2.82 3121 3.44 3301 4.11 3469 4.80 3634 5.52 3717 5.892950 1920 2434 1.20 2571 1.53 2699 1.88 2813 2.23 2919 2.59 3117 3.31 3299 4.01 3469 4.71 3633 5.45 3787 6.21 3861 6.603300 2147 2662 1.50 2783 1.86 2905 2.24 3019 2.63 3122 3.03 3310 3.83 3486 4.63 3650 5.42 3804 6.193650 2375 2896 1.87 3004 2.24 3115 2.65 3225 3.08 3327 3.51 3511 4.38 3679 5.27 3837 6.164000 2603 3134 2.31 3233 2.70 3332 3.12 3434 3.58 3533 4.05 3716 5.00 3879 5.964350 2831 3375 2.82 3466 3.24 3557 3.68 3649 4.15 3742 4.644700 3058 3703 3.86 3787 4.32 3871 4.805050 3286

Page 8: COMMERCIAL DUTY pLEnUM fAns - Industrial and …€¦ · 5 2Twin wCtnyFaa&CwinBll Application Guidelines Fan Selection Recommendations 1. System effect losses (see AMCA 201) and ple-num

Twin City Bulletin 4558

Performance Data

Performance certified is for installation Type A; Free inlet, Free outlet.Power rating (BHP) does not include transmission losses.Performance ratings do not include the effects of appurtenances (accessories).Underlined figures indicate Maximum Static Efficiency.

Wheel Diameter: 15.75" Fan Efficiency Grade = FEG71165 EPLFN (9-Blade)

Outlet Area = 1.94 ft2 Max. BHP = 0.185 x (RPM / 1000)3

Wheel Diameter: 15.75" Fan Efficiency Grade = FEG67165 EPLQN (12-Blade)

Outlet Area = 1.94 ft2 Max. BHP = 0.207 x (RPM / 1000)3

Wheel Diameter: 18.25" Fan Efficiency Grade = FEG80182 EPLFN (9-Blade)

Outlet Area = 2.59 ft2 Max. BHP = 0.444 x (RPM / 1000)3

Wheel Diameter: 18.25" Fan Efficiency Grade = FEG75182 EPLQN (12-Blade)

Outlet Area = 2.59 ft2 Max. BHP = 0.458 x (RPM / 1000)3

MAXIMUM RPM: Class II = 3468

MAXIMUM RPM: Class II = 3468

MAXIMUM RPM: Class II = 2930

MAXIMUM RPM: Class II = 2930

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP1500 772 1268 0.37 1478 0.591900 978 1408 0.49 1572 0.71 1739 0.97 1903 1.252300 1183 1558 0.63 1714 0.88 1849 1.15 1986 1.44 2124 1.76 2393 2.472700 1389 1713 0.79 1864 1.08 1996 1.39 2112 1.69 2227 2.02 2462 2.75 2693 3.563100 1595 1880 0.98 2016 1.32 2146 1.66 2262 2.00 2366 2.35 2566 3.09 2770 3.92 2974 4.82 3172 5.773500 1801 2054 1.21 2177 1.59 2298 1.97 2412 2.35 2518 2.74 2703 3.53 2879 4.36 3060 5.28 3241 6.27 3420 7.313900 2007 2232 1.47 2346 1.89 2456 2.31 2564 2.74 2667 3.16 2853 4.02 3017 4.91 3175 5.84 3336 6.834300 2212 2413 1.77 2521 2.23 2622 2.70 2721 3.16 2819 3.63 3003 4.57 3167 5.53 3315 6.50 3458 7.514700 2418 2595 2.13 2699 2.62 2795 3.12 2886 3.64 2977 4.15 3154 5.17 3318 6.20 3466 7.255100 2624 2779 2.54 2879 3.06 2971 3.60 3057 4.15 3141 4.71 3308 5.82 3467 6.925500 2830 2965 3.01 3061 3.56 3150 4.13 3232 4.72 3312 5.32 3467 6.525900 3036 3152 3.54 3244 4.12 3330 4.73 3410 5.35

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP1500 772 1250 0.40 1420 0.591900 978 1398 0.54 1554 0.76 1694 1.00 1823 1.26 1951 1.532300 1183 1556 0.69 1702 0.97 1832 1.24 1953 1.52 2066 1.82 2277 2.442700 1389 1721 0.87 1859 1.20 1982 1.52 2095 1.84 2202 2.17 2400 2.84 2581 3.56 2762 4.343100 1595 1887 1.08 2022 1.45 2139 1.83 2247 2.20 2349 2.58 2536 3.31 2711 4.09 2872 4.90 3027 5.75 3186 6.66 3269 7.133500 1801 2059 1.34 2188 1.75 2302 2.16 2406 2.59 2502 3.01 2682 3.85 2847 4.68 3004 5.55 3151 6.45 3291 7.38 3360 7.863900 2007 2239 1.65 2355 2.08 2468 2.55 2569 3.01 2662 3.48 2834 4.43 2994 5.37 3143 6.29 3285 7.23 3422 8.224300 2212 2424 2.03 2528 2.48 2634 2.97 2734 3.48 2825 3.99 2992 5.03 3145 6.08 3290 7.11 3426 8.124700 2418 2613 2.47 2707 2.94 2804 3.46 2900 4.01 2991 4.57 3154 5.68 3302 6.83 3442 7.985100 2624 2804 2.98 2891 3.48 2979 4.01 3068 4.58 3156 5.18 3318 6.39 3463 7.625500 2830 2998 3.56 3078 4.09 3159 4.65 3241 5.24 3324 5.875900 3036 3268 4.79 3343 5.37 3419 5.98

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP2500 966 1086 0.57 1244 0.853125 1207 1194 0.74 1341 1.07 1471 1.41 1594 1.783750 1449 1316 0.95 1448 1.32 1571 1.71 1685 2.12 1790 2.544375 1690 1447 1.20 1568 1.62 1681 2.06 1787 2.51 1889 2.99 2074 3.95 2249 4.985000 1932 1583 1.50 1696 1.98 1800 2.46 1899 2.96 1994 3.48 2173 4.55 2335 5.65 2488 6.795625 2173 1723 1.86 1829 2.39 1928 2.93 2020 3.47 2108 4.03 2276 5.18 2435 6.40 2582 7.64 2719 8.89 2855 10.226250 2415 1867 2.27 1966 2.86 2060 3.46 2147 4.05 2230 4.66 2388 5.90 2538 7.19 2681 8.54 2816 9.916875 2656 2014 2.76 2107 3.40 2195 4.05 2279 4.71 2358 5.36 2507 6.69 2650 8.08 2786 9.51 2916 10.977500 2898 2164 3.32 2250 4.01 2334 4.72 2413 5.43 2489 6.14 2632 7.58 2767 9.05 2897 10.578125 3139 2316 3.96 2397 4.71 2475 5.46 2551 6.23 2624 7.01 2762 8.56 2890 10.128750 3381 2469 4.69 2546 5.50 2619 6.30 2691 7.12 2761 7.95 2894 9.629375 3622 2624 5.52 2696 6.37 2766 7.24 2834 8.11 2901 8.99

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP2500 966 1093 0.59 1242 0.88 1380 1.193125 1207 1218 0.78 1350 1.11 1472 1.46 1587 1.83 1697 2.223750 1449 1355 1.00 1475 1.38 1586 1.78 1690 2.20 1791 2.63 1977 3.534375 1690 1499 1.28 1611 1.72 1712 2.16 1809 2.62 1901 3.10 2075 4.09 2237 5.13 2395 6.235000 1932 1648 1.62 1753 2.10 1848 2.60 1938 3.11 2023 3.63 2185 4.71 2338 5.84 2483 7.02 2621 8.23 2760 9.515625 2173 1802 2.02 1899 2.56 1990 3.11 2074 3.67 2154 4.24 2306 5.41 2450 6.63 2586 7.89 2718 9.20 2844 10.54 2905 11.226250 2415 1961 2.50 2049 3.08 2135 3.69 2216 4.30 2292 4.92 2435 6.19 2571 7.51 2700 8.86 2824 10.256875 2656 2122 3.06 2204 3.70 2283 4.35 2360 5.01 2434 5.69 2570 7.06 2699 8.47 2822 9.927500 2898 2286 3.71 2362 4.40 2436 5.11 2508 5.82 2578 6.55 2710 8.02 2833 9.548125 3139 2452 4.46 2522 5.20 2592 5.96 2659 6.72 2726 7.51 2853 9.098750 3381 2619 5.32 2685 6.11 2750 6.92 2814 7.74 2877 8.579375 3622 2850 7.14 2911 8.00

Page 9: COMMERCIAL DUTY pLEnUM fAns - Industrial and …€¦ · 5 2Twin wCtnyFaa&CwinBll Application Guidelines Fan Selection Recommendations 1. System effect losses (see AMCA 201) and ple-num

Twin City Bulletin 4559

Performance Data

Performance certified is for installation Type A; Free inlet, Free outlet.Power rating (BHP) does not include transmission losses.Performance ratings do not include the effects of appurtenances (accessories).Underlined figures indicate Maximum Static Efficiency.

Wheel Diameter: 20.00" Fan Efficiency Grade = FEG80200 EPLFN (9-Blade)

Outlet Area = 3.11 ft2 Max. BHP = 0.701 x (RPM / 1000)3

Wheel Diameter: 20.00" Fan Efficiency Grade = FEG75200 EPLQN (12-Blade)

Outlet Area = 3.11 ft2 Max. BHP = 0.724 x (RPM / 1000)3

Wheel Diameter: 22.25" Fan Efficiency Grade = FEG80222 EPLFN (9-Blade)

Outlet Area = 3.84 ft2 Max. BHP = 1.21 x (RPM / 1000)3

Wheel Diameter: 22.25" Fan Efficiency Grade = FEG80222 EPLQN (12-Blade)

Outlet Area = 3.84 ft2 Max. BHP = 1.29 x (RPM / 1000)3

MAXIMUM RPM: Class II = 2674

MAXIMUM RPM: Class II = 2674

MAXIMUM RPM: Class II = 2403

MAXIMUM RPM: Class II = 2403

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP3000 965 991 0.68 1135 1.023750 1206 1089 0.88 1223 1.28 1342 1.69 1454 2.134500 1447 1200 1.14 1321 1.58 1433 2.06 1538 2.55 1633 3.055250 1689 1320 1.44 1430 1.95 1533 2.47 1630 3.02 1723 3.58 1892 4.746000 1930 1443 1.80 1547 2.38 1642 2.95 1732 3.55 1819 4.17 1982 5.46 2130 6.77 2270 8.156750 2171 1571 2.23 1668 2.87 1758 3.51 1842 4.16 1923 4.83 2077 6.23 2221 7.68 2355 9.16 2481 10.68 2605 12.277500 2412 1702 2.72 1793 3.43 1878 4.14 1958 4.86 2034 5.59 2179 7.08 2316 8.64 2446 10.25 2569 11.898250 2654 1837 3.31 1921 4.07 2002 4.86 2078 5.64 2150 6.43 2287 8.03 2417 9.70 2541 11.41 2660 13.179000 2895 1973 3.98 2052 4.81 2128 5.65 2201 6.51 2270 7.37 2401 9.10 2524 10.86 2642 12.679750 3136 2112 4.75 2186 5.65 2257 6.55 2326 7.47 2393 8.40 2519 10.27 2636 12.1410500 3377 2252 5.63 2321 6.58 2389 7.56 2454 8.54 2518 9.53 2639 11.5411250 3619 2393 6.62 2459 7.65 2522 8.67 2585 9.73 2645 10.78

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP3000 965 997 0.71 1133 1.05 1259 1.433750 1206 1110 0.93 1231 1.33 1343 1.75 1448 2.20 1548 2.664500 1447 1236 1.20 1345 1.66 1447 2.14 1542 2.64 1634 3.16 1804 4.245250 1689 1367 1.54 1469 2.06 1562 2.59 1650 3.15 1734 3.72 1893 4.91 2041 6.16 2185 7.486000 1930 1503 1.94 1598 2.52 1686 3.12 1767 3.73 1845 4.35 1993 5.65 2133 7.01 2265 8.42 2392 9.89 2518 11.426750 2171 1644 2.42 1732 3.07 1815 3.73 1892 4.40 1965 5.08 2104 6.50 2234 7.95 2359 9.47 2480 11.04 2594 12.65 2650 13.477500 2412 1788 3.00 1869 3.70 1947 4.42 2021 5.16 2090 5.90 2221 7.43 2345 9.01 2463 10.63 2576 12.298250 2654 1935 3.66 2010 4.44 2082 5.21 2152 6.01 2219 6.82 2344 8.47 2461 10.16 2574 11.909000 2895 2085 4.45 2154 5.28 2221 6.12 2287 6.98 2351 7.85 2472 9.63 2584 11.449750 3136 2236 5.35 2300 6.23 2363 7.14 2425 8.06 2486 9.00 2602 10.910500 3377 2388 6.37 2449 7.33 2508 8.30 2566 9.28 2623 10.2711250 3619 2599 8.56 2654 9.58

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP3500 912 856 0.764500 1173 947 1.01 1067 1.47 1172 1.935500 1433 1051 1.31 1159 1.85 1259 2.41 1350 2.96 1434 3.536500 1694 1163 1.67 1261 2.29 1353 2.93 1439 3.58 1521 4.25 1668 5.56 1809 6.977500 1954 1280 2.11 1371 2.81 1456 3.53 1536 4.26 1612 5.00 1755 6.52 1885 8.05 2007 9.628500 2215 1402 2.64 1486 3.41 1565 4.20 1640 5.02 1711 5.85 1846 7.53 1973 9.26 2090 11.00 2199 12.73 2306 14.54 2360 15.499500 2475 1527 3.26 1605 4.11 1680 4.98 1750 5.87 1817 6.79 1944 8.64 2064 10.53 2178 12.46 2285 14.39 2386 16.3310500 2736 1654 3.98 1728 4.92 1797 5.86 1864 6.84 1927 7.82 2048 9.85 2161 11.90 2270 13.99 2374 16.1111500 2996 1784 4.84 1853 5.85 1918 6.87 1981 7.92 2041 8.98 2156 11.16 2264 13.39 2368 15.6612500 3257 1915 5.81 1980 6.91 2042 8.02 2101 9.14 2158 10.27 2268 12.60 2371 14.9813500 3518 2048 6.93 2109 8.11 2167 9.30 2224 10.51 2278 11.72 2383 14.2014500 3778 2181 8.19 2239 9.46 2295 10.74 2349 12.03 2400 13.31

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP3500 912 848 0.78 974 1.174500 1173 956 1.06 1060 1.52 1158 2.00 1256 2.52 1354 3.075500 1433 1076 1.42 1170 1.95 1257 2.51 1337 3.07 1417 3.66 1578 4.956500 1694 1204 1.86 1288 2.46 1368 3.10 1444 3.76 1514 4.41 1649 5.77 1785 7.25 1921 8.837500 1954 1338 2.40 1414 3.08 1487 3.79 1557 4.52 1623 5.26 1748 6.78 1865 8.34 1983 10.01 2100 11.75 2218 13.60 2277 14.548500 2215 1475 3.06 1546 3.83 1612 4.60 1677 5.41 1739 6.23 1857 7.92 1966 9.63 2070 11.38 2173 13.21 2278 15.15 2329 16.129500 2475 1615 3.84 1681 4.70 1743 5.56 1802 6.43 1860 7.32 1971 9.17 2075 11.06 2174 12.97 2268 14.92 2360 16.9110500 2736 1757 4.77 1819 5.72 1877 6.66 1933 7.62 1986 8.57 2090 10.56 2189 12.61 2284 14.71 2374 16.8211500 2996 1900 5.84 1959 6.89 2014 7.93 2067 8.97 2117 10.01 2214 12.13 2308 14.33 2398 16.5812500 3257 2045 7.08 2100 8.22 2153 9.37 2203 10.50 2251 11.63 2342 13.8813500 3518 2191 8.50 2243 9.74 2293 10.98 2341 12.21 2387 13.4414500 3778 2387 11.46

Page 10: COMMERCIAL DUTY pLEnUM fAns - Industrial and …€¦ · 5 2Twin wCtnyFaa&CwinBll Application Guidelines Fan Selection Recommendations 1. System effect losses (see AMCA 201) and ple-num

Twin City Bulletin 45510

Performance Data

Performance certified is for installation Type A; Free inlet, Free outlet.Power rating (BHP) does not include transmission losses.Performance ratings do not include the effects of appurtenances (accessories).Underlined figures indicate Maximum Static Efficiency.

Wheel Diameter: 24.50" Fan Efficiency Grade = FEG85245 EPLFN (9-Blade)

Outlet Area = 4.66 ft2 Max. BHP = 1.88 x (RPM / 1000)3

Wheel Diameter: 24.50" Fan Efficiency Grade = FEG80245 EPLQN (12-Blade)

Outlet Area = 4.66 ft2 Max. BHP = 2.04 x (RPM / 1000)3

Wheel Diameter: 27.00" Fan Efficiency Grade = FEG80270 EPLFN (9-Blade)

Outlet Area = 5.67 ft2 Max. BHP = 3.04 x (RPM / 1000)3

Wheel Diameter: 27.00" Fan Efficiency Grade = FEG80270 EPLQN (12-Blade)

Outlet Area = 5.67 ft2 Max. BHP = 3.25 x (RPM / 1000)3

MAXIMUM RPM: Class II = 2183

MAXIMUM RPM: Class II = 2183

MAXIMUM RPM: Class II = 1981

MAXIMUM RPM: Class II = 1981

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP4400 944 790 0.93 910 1.40 1021 1.925600 1202 877 1.23 981 1.77 1079 2.36 1171 2.98 1258 3.636800 1459 978 1.61 1069 2.22 1156 2.88 1239 3.58 1318 4.30 1467 5.82 1608 7.458000 1717 1085 2.08 1169 2.78 1246 3.51 1321 4.27 1393 5.06 1530 6.73 1659 8.49 1783 10.35 1901 12.299200 1974 1195 2.64 1275 3.44 1347 4.26 1414 5.09 1480 5.96 1606 7.76 1726 9.67 1840 11.65 1951 13.75 2057 15.88 2109 16.9910400 2232 1307 3.29 1384 4.22 1453 5.14 1515 6.04 1575 6.98 1692 8.94 1803 10.97 1910 13.10 2014 15.34 2113 17.61 2162 18.7911600 2489 1422 4.08 1494 5.09 1561 6.13 1622 7.15 1678 8.16 1785 10.25 1889 12.44 1990 14.73 2087 17.08 2181 19.5112800 2747 1540 5.01 1607 6.11 1670 7.24 1729 8.37 1785 9.51 1886 11.76 1982 14.08 2077 16.52 2168 19.0014000 3004 1660 6.11 1722 7.28 1781 8.49 1839 9.74 1893 10.99 1991 13.44 2082 15.93 2170 18.4915200 3262 1781 7.37 1839 8.63 1895 9.92 1949 11.25 2002 12.61 2098 15.2916400 3519 1904 8.83 1958 10.16 2011 11.54 2062 12.95 2112 14.3917600 3777 2027 10.47 2079 11.91 2128 13.35 2177 14.85

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP4400 944 779 0.96 892 1.445600 1202 875 1.29 969 1.84 1061 2.44 1148 3.07 1234 3.736800 1459 986 1.72 1066 2.34 1144 3.00 1221 3.71 1296 4.45 1437 5.988000 1717 1100 2.24 1176 2.97 1244 3.70 1311 4.46 1377 5.27 1506 6.98 1627 8.75 1747 10.629200 1974 1216 2.85 1290 3.72 1355 4.55 1414 5.38 1472 6.24 1587 8.07 1700 10.03 1808 12.06 1911 14.11 2016 16.3010400 2232 1335 3.58 1405 4.56 1468 5.52 1526 6.47 1578 7.40 1681 9.34 1783 11.42 1883 13.61 1981 15.88 2074 18.17 2120 19.3411600 2489 1457 4.45 1522 5.52 1583 6.62 1639 7.69 1691 8.75 1785 10.83 1877 13.01 1969 15.34 2059 17.74 2147 20.2212800 2747 1581 5.48 1641 6.64 1699 7.84 1753 9.04 1804 10.23 1896 12.54 1981 14.87 2064 17.27 2147 19.8014000 3004 1706 6.68 1763 7.93 1817 9.22 1869 10.53 1918 11.84 2010 14.45 2091 16.96 2168 19.5015200 3262 1834 8.08 1886 9.41 1937 10.79 1987 12.21 2034 13.63 2123 16.4816400 3519 1962 9.67 2012 11.12 2060 12.59 2106 14.07 2152 15.6117600 3777 2138 13.03 2183 14.58

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP5000 882 705 1.07 824 1.656400 1129 776 1.39 876 2.04 970 2.76 1062 3.537800 1376 860 1.81 948 2.54 1031 3.33 1110 4.16 1187 5.05 1338 6.969200 1623 951 2.32 1031 3.15 1106 4.02 1177 4.93 1245 5.87 1378 7.92 1506 10.1210600 1870 1045 2.92 1120 3.87 1189 4.84 1254 5.83 1317 6.86 1437 9.02 1553 11.36 1665 13.85 1776 16.4512000 2117 1143 3.64 1213 4.70 1278 5.79 1338 6.87 1397 8.00 1508 10.32 1614 12.78 1717 15.38 1817 18.13 1915 20.98 1964 22.4513400 2363 1244 4.49 1309 5.67 1370 6.86 1428 8.08 1482 9.28 1586 11.79 1685 14.41 1780 17.12 1873 19.98 1964 22.9814800 2610 1346 5.47 1407 6.77 1465 8.08 1520 9.41 1572 10.74 1670 13.44 1763 16.23 1852 19.11 1939 22.1016200 2857 1451 6.62 1508 8.04 1562 9.46 1614 10.90 1664 12.35 1757 15.26 1846 18.26 1931 21.3317600 3104 1557 7.93 1610 9.47 1661 11.01 1711 12.57 1758 14.13 1848 17.28 1932 20.4619000 3351 1664 9.43 1714 11.09 1762 12.74 1809 14.42 1854 16.09 1941 19.4920400 3598 1772 11.14 1819 12.90 1865 14.69 1909 16.47 1952 18.26

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP5000 882 698 1.11 802 1.666400 1129 777 1.47 869 2.13 954 2.82 1033 3.557800 1376 869 1.92 950 2.69 1026 3.48 1098 4.31 1167 5.17 1297 6.959200 1623 967 2.47 1040 3.34 1109 4.25 1174 5.17 1237 6.13 1356 8.12 1467 10.19 1579 12.3710600 1870 1071 3.15 1137 4.12 1200 5.13 1259 6.16 1317 7.23 1427 9.42 1532 11.71 1630 14.06 1725 16.48 1823 19.0212000 2117 1177 3.96 1238 5.04 1296 6.15 1351 7.28 1404 8.45 1506 10.85 1603 13.33 1697 15.91 1786 18.54 1871 21.22 1913 22.5913400 2363 1285 4.93 1343 6.13 1396 7.33 1448 8.58 1498 9.85 1592 12.45 1683 15.15 1770 17.90 1855 20.75 1937 23.66 1977 25.1514800 2610 1395 6.06 1449 7.37 1500 8.71 1548 10.05 1595 11.43 1684 14.24 1769 17.15 1851 20.12 1930 23.1416200 2857 1505 7.37 1557 8.81 1605 10.25 1651 11.72 1695 13.20 1779 16.21 1859 19.31 1937 22.5217600 3104 1617 8.88 1667 10.47 1713 12.03 1756 13.60 1798 15.19 1877 18.39 1954 21.7219000 3351 1730 10.62 1777 12.32 1821 14.01 1863 15.71 1902 17.39 1978 20.8320400 3598 1844 12.60 1888 14.40 1931 16.24 1971 18.06

Page 11: COMMERCIAL DUTY pLEnUM fAns - Industrial and …€¦ · 5 2Twin wCtnyFaa&CwinBll Application Guidelines Fan Selection Recommendations 1. System effect losses (see AMCA 201) and ple-num

Twin City Bulletin 45511

Performance Data

Performance certified is for installation Type A; Free inlet, Free outlet.Power rating (BHP) does not include transmission losses.Performance ratings do not include the effects of appurtenances (accessories).Underlined figures indicate Maximum Static Efficiency.

Wheel Diameter: 30.00" Fan Efficiency Grade = FEG80300 EPLFN (9-Blade)

Outlet Area = 7.00 ft2 Max. BHP = 5.17 x (RPM / 1000)3

Wheel Diameter: 30.00" Fan Efficiency Grade = FEG80300 EPLQN (12-Blade)

Outlet Area = 7.00 ft2 Max. BHP = 5.54 x (RPM / 1000)3

Wheel Diameter: 33.00" Fan Efficiency Grade = FEG80330 EPLFN (9-Blade)

Outlet Area = 8.46 ft2 Max. BHP = 8.32 x (RPM / 1000)3

Wheel Diameter: 33.00" Fan Efficiency Grade = FEG80330 EPLQN (12-Blade)

Outlet Area = 8.46 ft2 Max. BHP = 8.92 x (RPM / 1000)3

MAXIMUM RPM: Class II = 1783

MAXIMUM RPM: Class II = 1783

MAXIMUM RPM: Class II = 1620

MAXIMUM RPM: Class II = 1620

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP6000 858 627 1.27 732 1.967800 1115 694 1.68 783 2.48 867 3.33 946 4.24 1021 5.219600 1372 774 2.20 852 3.11 925 4.07 995 5.09 1063 6.15 1191 8.4111400 1630 862 2.86 931 3.87 997 4.95 1059 6.07 1120 7.25 1236 9.70 1346 12.30 1451 15.1013200 1887 951 3.65 1018 4.81 1077 5.99 1134 7.22 1189 8.50 1294 11.18 1396 14.02 1493 16.96 1586 20.03 1676 23.28 1720 24.9615000 2144 1041 4.58 1107 5.91 1164 7.24 1216 8.58 1266 9.96 1363 12.85 1456 15.91 1546 19.09 1633 22.36 1718 25.77 1759 27.5016800 2402 1133 5.67 1196 7.17 1252 8.65 1303 10.14 1349 11.62 1439 14.74 1525 17.99 1608 21.38 1690 24.94 1769 28.5518600 2659 1229 7.00 1286 8.59 1341 10.25 1391 11.90 1437 13.55 1520 16.86 1601 20.35 1679 23.96 1754 27.6720400 2916 1326 8.53 1379 10.26 1431 12.06 1480 13.87 1525 15.67 1606 19.27 1681 22.95 1755 26.8022200 3174 1425 10.32 1474 12.17 1522 14.08 1569 16.05 1614 18.03 1695 21.98 1767 25.9124000 3431 1526 12.40 1571 14.36 1616 16.40 1660 18.49 1703 20.61 1783 24.8925800 3688 1627 14.75 1669 16.84 1711 19.00 1752 21.19

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP6000 858 621 1.33 731 2.047800 1115 690 1.76 775 2.58 860 3.47 944 4.419600 1372 774 2.32 847 3.24 917 4.24 985 5.29 1054 6.3911400 1630 865 3.03 931 4.08 992 5.17 1052 6.34 1110 7.55 1225 10.10 1341 12.8113200 1887 959 3.91 1021 5.09 1077 6.31 1130 7.56 1182 8.87 1283 11.66 1382 14.58 1483 17.66 1582 20.8715000 2144 1056 4.96 1113 6.28 1166 7.63 1215 9.01 1262 10.42 1354 13.39 1443 16.55 1531 19.88 1619 23.29 1707 26.80 1751 28.6216800 2402 1156 6.22 1209 7.71 1258 9.18 1305 10.69 1350 12.25 1434 15.43 1515 18.75 1595 22.28 1673 25.93 1752 29.7318600 2659 1257 7.67 1306 9.34 1353 10.99 1397 12.62 1440 14.31 1519 17.72 1594 21.26 1668 24.96 1740 28.8120400 2916 1359 9.34 1406 11.23 1450 13.05 1492 14.84 1532 16.63 1608 20.32 1679 24.10 1748 28.0222200 3174 1463 11.28 1507 13.35 1548 15.35 1588 17.33 1626 19.26 1699 23.20 1768 27.2924000 3431 1567 13.48 1609 15.75 1648 17.94 1686 20.11 1722 22.225800 3688 1711 18.41 1749 20.82

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP7000 827 564 1.49 661 2.319200 1088 623 1.97 706 2.93 783 3.94 856 5.03 925 6.2011400 1348 696 2.60 768 3.68 835 4.83 900 6.06 962 7.32 1079 10.0313600 1608 777 3.40 840 4.60 900 5.89 957 7.23 1013 8.64 1120 11.60 1221 14.74 1316 18.0715800 1868 858 4.33 919 5.72 973 7.14 1025 8.62 1076 10.17 1172 13.38 1265 16.79 1354 20.34 1439 24.04 1521 27.94 1561 29.9618000 2128 940 5.44 1001 7.06 1053 8.65 1100 10.25 1146 11.92 1235 15.42 1320 19.10 1402 22.92 1481 26.83 1558 30.91 1596 33.0320200 2388 1025 6.78 1082 8.56 1134 10.37 1180 12.16 1222 13.94 1304 17.69 1383 21.64 1459 25.74 1533 29.98 1605 34.3222400 2648 1113 8.38 1165 10.31 1215 12.30 1261 14.30 1302 16.27 1378 20.26 1452 24.48 1523 28.83 1592 33.3424600 2908 1202 10.24 1250 12.32 1297 14.48 1342 16.68 1384 18.89 1457 23.20 1526 27.68 1592 32.2426800 3168 1293 12.42 1338 14.67 1381 16.96 1424 19.33 1465 21.74 1538 26.47 1604 31.2429000 3428 1385 14.94 1427 17.35 1467 19.77 1507 22.29 1547 24.90 1620 30.0831200 3688 1478 17.82 1517 20.37 1555 22.97 1592 25.61

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP7000 827 559 1.559200 1088 620 2.06 699 3.05 778 4.1011400 1348 696 2.73 763 3.84 827 5.02 891 6.30 955 7.6213600 1608 779 3.58 839 4.83 895 6.14 950 7.53 1003 8.98 1110 12.06 1217 15.3415800 1868 865 4.64 921 6.05 972 7.50 1021 9.02 1069 10.60 1161 13.93 1253 17.48 1345 21.15 1437 25.0818000 2128 954 5.91 1006 7.50 1054 9.11 1099 10.77 1142 12.46 1226 16.04 1308 19.88 1388 23.85 1469 27.97 1550 32.23 1590 34.4120200 2388 1045 7.42 1094 9.23 1139 11.00 1182 12.83 1222 14.67 1299 18.51 1374 22.56 1446 26.77 1518 31.20 1590 35.7722400 2648 1138 9.18 1183 11.21 1226 13.19 1266 15.15 1305 17.18 1377 21.30 1446 25.59 1513 30.03 1579 34.7024600 2908 1232 11.22 1274 13.47 1315 15.70 1353 17.85 1389 19.99 1459 24.48 1524 29.06 1586 33.7426800 3168 1327 13.57 1367 16.06 1405 18.51 1441 20.87 1476 23.22 1542 27.96 1605 32.9029000 3428 1423 16.27 1461 18.99 1497 21.67 1531 24.26 1564 26.8131200 3688 1555 22.26 1589 25.15

Page 12: COMMERCIAL DUTY pLEnUM fAns - Industrial and …€¦ · 5 2Twin wCtnyFaa&CwinBll Application Guidelines Fan Selection Recommendations 1. System effect losses (see AMCA 201) and ple-num

Twin City Bulletin 45512

Performance Data

Performance certified is for installation Type A; Free inlet, Free outlet.Power rating (BHP) does not include transmission losses.Performance ratings do not include the effects of appurtenances (accessories).Underlined figures indicate Maximum Static Efficiency.

Wheel Diameter: 36.50" Fan Efficiency Grade = FEG85365 EPLFN (9-Blade)

Outlet Area = 10.35 ft2 Max. BHP = 14.26 x (RPM / 1000)3

Wheel Diameter: 36.50" Fan Efficiency Grade = FEG80365 EPLQN (12-Blade)

Outlet Area = 10.35 ft2 Max. BHP = 15.14 x (RPM / 1000)3

Wheel Diameter: 40.25" Fan Efficiency Grade = FEG85402 EPLFN (9-Blade)

Outlet Area = 12.60 ft2 Max. BHP = 23.25 x (RPM / 1000)3

Wheel Diameter: 40.25" Fan Efficiency Grade = FEG80402 EPLQN (12-Blade)

Outlet Area = 12.60 ft2 Max. BHP = 24.68 x (RPM / 1000)3

MAXIMUM RPM: Class II = 1465

MAXIMUM RPM: Class II = 1465

MAXIMUM RPM: Class II = 1329

MAXIMUM RPM: Class II = 1329

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP8000 773 491 1.6610800 1043 542 2.25 617 3.34 687 4.4913600 1314 605 2.99 672 4.27 733 5.61 791 7.01 846 8.4316400 1584 676 3.92 735 5.39 791 6.92 843 8.50 893 10.15 987 13.51 1078 17.1319200 1855 752 5.05 805 6.74 856 8.48 904 10.24 950 12.07 1036 15.84 1118 19.78 1196 23.8222000 2125 832 6.44 879 8.30 925 10.25 969 12.22 1012 14.24 1093 18.41 1169 22.75 1242 27.25 1311 31.74 1379 36.44 1413 38.9024800 2396 916 8.18 958 10.20 999 12.32 1039 14.49 1079 16.73 1155 21.28 1227 26.01 1294 30.81 1359 35.76 1423 40.89 1454 43.4627600 2666 1001 10.25 1039 12.42 1076 14.69 1113 17.07 1150 19.53 1221 24.50 1289 29.60 1353 34.80 1415 40.1930400 2937 1088 12.73 1122 15.04 1156 17.46 1191 20.05 1224 22.65 1290 28.04 1354 33.55 1415 39.1233200 3207 1176 15.63 1207 18.10 1239 20.71 1270 23.38 1301 26.17 1363 32.00 1422 37.8636000 3478 1294 21.66 1323 24.41 1352 27.25 1381 30.20 1438 36.3338800 3748 1381 25.68 1408 28.60 1435 31.60 1462 34.69

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP8000 773 486 1.7210800 1043 545 2.37 611 3.4613600 1314 619 3.22 677 4.52 729 5.83 782 7.2416400 1584 698 4.27 751 5.79 800 7.36 845 8.94 887 10.52 977 14.0419200 1855 779 5.54 829 7.30 874 9.08 916 10.89 957 12.76 1031 16.48 1106 20.4822000 2125 863 7.10 910 9.10 953 11.12 992 13.14 1030 15.24 1100 19.42 1165 23.68 1229 28.11 1297 32.9224800 2396 949 8.97 992 11.18 1033 13.45 1071 15.73 1106 18.00 1173 22.70 1235 27.42 1293 32.19 1350 37.13 1408 42.29 1438 44.9827600 2666 1036 11.18 1077 13.65 1115 16.13 1151 18.64 1185 21.16 1249 26.32 1308 31.53 1364 36.78 1417 42.0830400 2937 1124 13.77 1163 16.50 1199 19.23 1233 21.96 1266 24.75 1327 30.33 1383 35.95 1437 41.7333200 3207 1213 16.79 1250 19.78 1284 22.73 1317 25.74 1348 28.73 1407 34.81 1461 40.8836000 3478 1303 20.28 1337 23.47 1370 26.70 1401 29.92 1431 33.1738800 3748 1393 24.24 1426 27.72 1457 31.18

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP10000 794 448 2.0613300 1056 494 2.77 562 4.11 624 5.5016600 1318 550 3.66 611 5.23 666 6.86 718 8.55 768 10.3019900 1580 612 4.75 666 6.54 717 8.41 764 10.32 809 12.30 895 16.4223200 1842 679 6.08 727 8.11 773 10.20 817 12.35 859 14.57 937 19.12 1012 23.90 1083 28.7926500 2104 749 7.70 792 9.95 834 12.30 874 14.66 914 17.14 987 22.13 1056 27.35 1123 32.82 1186 38.26 1248 43.95 1279 46.9229800 2366 822 9.69 861 12.14 899 14.71 936 17.35 972 20.01 1042 25.54 1107 31.20 1168 36.97 1228 43.01 1286 49.15 1314 52.2133100 2628 897 12.09 932 14.71 966 17.44 1000 20.30 1034 23.27 1099 29.24 1161 35.37 1220 41.69 1276 48.1136400 2890 973 14.92 1005 17.73 1036 20.63 1068 23.74 1099 26.91 1159 33.34 1218 39.98 1274 46.70 1328 53.6239700 3152 1050 18.23 1080 21.27 1109 24.38 1137 27.57 1166 30.95 1222 37.86 1277 44.9543000 3414 1155 25.27 1182 28.58 1209 32.01 1236 35.59 1288 42.9046300 3676 1232 29.92 1257 33.41 1282 37.02 1307 40.75

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP10000 794 443 2.1413300 1056 497 2.93 556 4.2516600 1318 562 3.93 615 5.51 663 7.14 710 8.84 761 10.7319900 1580 632 5.18 680 7.02 724 8.90 765 10.82 804 12.78 886 17.0723200 1842 703 6.66 749 8.80 790 10.96 828 13.14 865 15.39 932 19.87 1001 24.7526500 2104 777 8.48 819 10.86 858 13.29 895 15.80 929 18.30 993 23.36 1052 28.48 1111 33.88 1173 39.6629800 2366 852 10.64 892 13.32 929 16.04 963 18.74 996 21.55 1057 27.20 1113 32.84 1166 38.59 1218 44.52 1272 50.83 1300 54.1333100 2628 928 13.18 966 16.16 1001 19.15 1034 22.17 1065 25.20 1123 31.37 1177 37.64 1229 44.05 1277 50.39 1323 56.7736400 2890 1006 16.19 1041 19.42 1074 22.68 1106 26.02 1136 29.36 1191 35.99 1243 42.82 1292 49.7239700 3152 1084 19.65 1118 23.23 1149 26.75 1179 30.34 1207 33.89 1261 41.16 1311 48.5043000 3414 1163 23.65 1195 27.51 1225 31.36 1253 35.17 1281 39.1146300 3676 1242 28.17 1272 32.29 1301 36.46 1328 40.58

Page 13: COMMERCIAL DUTY pLEnUM fAns - Industrial and …€¦ · 5 2Twin wCtnyFaa&CwinBll Application Guidelines Fan Selection Recommendations 1. System effect losses (see AMCA 201) and ple-num

Twin City Bulletin 45513

Performance Data

Performance certified is for installation Type A; Free inlet, Free outlet.Power rating (BHP) does not include transmission losses.Performance ratings do not include the effects of appurtenances (accessories).Underlined figures indicate Maximum Static Efficiency.

Wheel Diameter: 44.50" Fan Efficiency Grade = FEG85445 EPLFN (9-Blade)

Outlet Area = 15.38 ft2 Max. BHP = 38.36 x (RPM / 1000)3

Wheel Diameter: 44.50" Fan Efficiency Grade = FEG80445 EPLQN (12-Blade)

Outlet Area = 15.38 ft2 Max. BHP = 40.80 x (RPM / 1000)3

Wheel Diameter: 49.00" Fan Efficiency Grade = FEG85490 EPLFN (9-Blade)

Outlet Area = 18.64 ft2 Max. BHP = 62.10 x (RPM / 1000)3

Wheel Diameter: 49.00" Fan Efficiency Grade = FEG80490 EPLQN (12-Blade)

Outlet Area = 18.64 ft2 Max. BHP = 65.99 x (RPM / 1000)3

MAXIMUM RPM: Class II = 1202

MAXIMUM RPM: Class II = 1202

MAXIMUM RPM: Class II = 1091

MAXIMUM RPM: Class II = 1091

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP12000 780 403 2.4716100 1047 445 3.35 507 4.99 564 6.6920200 1313 496 4.44 551 6.34 601 8.33 649 10.42 694 12.5424300 1580 553 5.79 602 7.98 648 10.25 691 12.62 732 15.05 809 20.0328400 1846 615 7.46 658 9.93 700 12.51 740 15.15 778 17.88 848 23.41 916 29.29 980 35.2632500 2113 680 9.50 718 12.22 756 15.11 792 18.00 828 21.04 894 27.16 956 33.52 1016 40.16 1073 46.83 1129 53.79 1157 57.4336600 2379 747 11.99 781 14.93 815 18.07 849 21.35 881 24.58 944 31.34 1003 38.31 1059 45.51 1112 52.77 1165 60.39 1190 64.1140700 2646 816 15.01 847 18.19 878 21.57 908 25.04 938 28.63 997 36.01 1053 43.54 1106 51.26 1157 59.2244800 2913 886 18.57 914 21.97 942 25.54 971 29.38 998 33.19 1053 41.20 1105 49.23 1156 57.5548900 3179 957 22.75 983 26.42 1009 30.24 1035 34.23 1060 38.28 1111 46.85 1160 55.5253000 3446 1053 31.54 1077 35.60 1101 39.80 1124 44.05 1172 53.1957100 3712 1123 37.32 1146 41.69 1168 46.08 1190 50.61

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP12000 780 399 2.5716100 1047 448 3.55 502 5.1620200 1313 507 4.77 555 6.70 598 8.66 642 10.7924300 1580 571 6.31 615 8.58 655 10.89 692 13.23 727 15.60 801 20.8328400 1846 637 8.18 678 10.77 715 13.41 750 16.13 783 18.85 844 24.37 906 30.3132500 2113 705 10.45 743 13.38 778 16.34 811 19.39 842 22.48 900 28.70 953 34.96 1006 41.54 1062 48.6436600 2379 774 13.15 810 16.44 843 19.75 874 23.10 903 26.47 958 33.40 1010 40.48 1057 47.44 1104 54.74 1152 62.38 1177 66.3940700 2646 844 16.34 878 19.99 909 23.63 939 27.36 967 31.08 1019 38.63 1068 46.36 1115 54.24 1158 61.98 1200 69.9144800 2913 915 20.08 947 24.09 977 28.12 1005 32.15 1032 36.25 1082 44.44 1129 52.86 1173 61.3248900 3179 987 24.44 1017 28.80 1046 33.23 1073 37.65 1098 42.00 1147 51.00 1192 60.0353000 3446 1059 29.41 1088 34.19 1115 38.92 1141 43.71 1166 48.5457100 3712 1132 35.14 1160 40.33 1185 45.35

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP16000 858 376 3.2920800 1116 416 4.39 470 6.45 519 8.5625600 1373 462 5.74 511 8.14 555 10.60 597 13.19 637 15.8430400 1631 513 7.39 556 10.09 597 12.91 636 15.87 672 18.85 741 25.05 807 31.6035200 1888 567 9.37 606 12.46 643 15.60 679 18.86 713 22.20 777 29.14 837 36.27 894 43.54 951 51.3940000 2146 624 11.81 659 15.20 693 18.74 726 22.35 757 25.93 818 33.60 873 41.30 927 49.43 979 57.72 1029 66.16 1054 70.5744800 2403 683 14.78 715 18.47 745 22.25 775 26.19 805 30.27 861 38.41 915 47.02 965 55.71 1013 64.58 1061 73.92 1084 78.5549600 2661 744 18.38 772 22.24 800 26.36 828 30.68 855 35.03 908 43.97 959 53.18 1007 62.58 1052 72.0354400 2918 805 22.53 831 26.71 857 31.11 882 35.62 908 40.43 957 50.04 1005 59.93 1051 69.9959200 3176 868 27.49 891 31.87 915 36.52 939 41.41 962 46.35 1008 56.68 1053 67.2664000 3433 953 37.91 974 42.69 996 47.78 1018 53.07 1061 64.0068800 3691 1014 44.56 1035 49.83 1055 55.11 1076 60.72

CFM OV1" SP 1.5" SP 2" SP 2.5" SP 3" SP 4" SP 5" SP 6" SP 7" SP 8" SP 8.5" SP

RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP16000 858 372 3.4020800 1116 420 4.65 467 6.70 514 8.9125600 1373 473 6.16 516 8.61 554 11.06 591 13.63 630 16.4230400 1631 530 8.06 569 10.86 605 13.76 638 16.66 669 19.59 733 25.9635200 1888 588 10.31 625 13.53 658 16.78 689 20.09 719 23.49 774 30.32 828 37.50 886 45.4040000 2146 647 12.99 682 16.63 714 20.32 743 24.00 771 27.78 823 35.38 871 43.08 919 51.23 968 59.7444800 2403 708 16.23 741 20.29 771 24.36 799 28.45 825 32.55 875 41.06 921 49.56 964 58.14 1007 67.17 1050 76.47 1072 81.2749600 2661 770 20.04 800 24.43 829 28.95 856 33.48 881 37.97 929 47.28 973 56.65 1015 66.14 1054 75.5754400 2918 832 24.42 861 29.29 888 34.16 914 39.13 938 44.03 984 54.08 1026 64.18 1066 74.4659200 3176 895 29.51 923 34.87 949 40.20 973 45.47 996 50.78 1040 61.58 1081 72.5264000 3433 959 35.40 985 41.13 1009 46.77 1033 52.60 1055 58.3068800 3691 1023 42.06 1047 48.11 1071 54.33

Page 14: COMMERCIAL DUTY pLEnUM fAns - Industrial and …€¦ · 5 2Twin wCtnyFaa&CwinBll Application Guidelines Fan Selection Recommendations 1. System effect losses (see AMCA 201) and ple-num

Twin City Bulletin 45514

Dimensional Data – Arr. 4

DIMENSIONS ARE SUBJECT TO CHANGE. CERTIFIED DRAWINGS AVAILABLE UPON REQUEST.AC1003031

D E

2X 3.09

2X .83

2X SLOT.88 X .56

F OPTIONAL THRUSTISOLATOR BRACKETS

D

E

B

C

A

2X 5.75

H

4X SLOT.70 X .56

J

G

1

1 'A' DIMENSION IS REFERENCE FOR ODP MOTORS

SIZE MOTOR FRAME A B C D E F G H J

122 56 TO 184T 25.50 2.00 25.00 20.00 10.00 3.00 23.45 6.33 13.96

150 56 TO 145T 23.65 2.00 24.12 22.00 11.00 3.00 25.45 6.52 14.34182T TO 215T 29.78 2.00 27.00 22.00 11.00 3.00 25.45 6.52 17.21

165 56 TO 184T 27.72 2.00 26.20 24.00 12.00 3.00 27.41 6.64 16.42213T TO 256T 34.32 2.00 33.03 24.00 12.00 3.00 27.41 6.64 23.25

182 56 TO 184T 31.59 2.00 30.17 26.00 13.00 3.00 29.44 6.64 19.63213T TO 256T 39.94 2.00 37.00 26.00 13.00 3.00 29.44 6.64 26.46

200 56 TO 184T 32.88 2.00 30.92 29.00 14.50 3.00 32.44 6.64 19.88213T TO 256T 41.23 2.00 38.50 29.00 14.50 3.00 32.44 6.64 27.46

222 56 TO 184T 35.08 2.00 33.92 32.00 16.00 3.00 35.41 6.64 23.88213T TO 256T 43.56 2.00 39.00 32.00 16.00 3.00 35.41 6.64 28.96

245 143T TO 215T 40.10 2.00 38.78 34.00 17.00 3.00 39.41 6.85 27.78254T TO 284T 45.99 2.00 42.75 34.00 17.00 3.00 39.41 6.85 31.75

270 213T TO 215T 41.98 2.00 41.22 38.00 19.00 3.00 43.41 6.85 30.28254T TO 286T 49.37 2.00 45.00 38.00 19.00 3.00 43.41 6.85 34.06

300 213T TO 256T 49.25 2.00 45.47 42.00 21.00 3.00 47.38 6.85 34.28284T TO 326T 52.40 2.00 50.50 42.00 21.00 3.00 47.38 6.85 39.31

330 254T TO 286T 53.76 2.00 49.16 46.00 23.00 3.00 51.38 6.85 38.22324T TO 365T 57.77 2.00 55.00 46.00 23.00 3.00 51.38 6.85 44.06

365 254T TO 286T 56.39 2.00 51.39 51.00 25.50 3.00 56.38 7.30 40.29324T TO 365T 60.40 2.00 57.00 51.00 25.50 3.00 56.38 7.30 45.90

402 254T TO 326T 59.05 2.50 55.89 56.00 28.00 5.25 62.97 8.71 41.85364T TO 404T 65.45 2.50 63.75 56.00 28.00 5.25 62.97 8.71 49.71

445 254T TO 326T 63.75 2.50 60.89 62.00 31.00 5.25 68.97 8.71 46.35364T TO 405T 70.15 2.50 68.75 62.00 31.00 5.25 68.97 8.71 54.21

490 254T TO 326T 67.57 3.00 63.87 68.00 34.00 5.25 74.97 9.21 49.07364T TO 405T 73.97 3.00 73.00 68.00 34.00 5.25 74.97 9.21 58.20

NOTES:1. Horizontal applications only.2. 'CW' rotation is standard, 'CCW' rotation

is optional. Rotation is determined by viewing the drive end.

3. Fan guard available as option.4. Inlet guard available as option.

Page 15: COMMERCIAL DUTY pLEnUM fAns - Industrial and …€¦ · 5 2Twin wCtnyFaa&CwinBll Application Guidelines Fan Selection Recommendations 1. System effect losses (see AMCA 201) and ple-num

Twin City Bulletin 45515

Typical SpecificationsFans shall be Type EPLFN or EPLQN cost effective centrifugal plenum (plug) type, as manufactured by Twin City Fan & Blower, Minneapolis, Minnesota.

Performance — Performance ratings shall conform to AMCA Standard 205 (fan efficiency grade), 211 (air performance) and 311 (sound performance). Fans shall be tested in accordance with ANSI/AMCA Standard 210 (air performance) and 300 (sound performance) in an AMCA accredited laboratory. Fans shall be licensed to bear the AMCA certified ratings seal for both sound and air, and fan efficiency grade (FEG).

Fans shall have a sharply rising pressure characteristic extending through the operating range and continuing to rise beyond the peak efficiency to ensure quiet and stable operation. Fans shall have a non-overloading design with self-limiting horsepower characteristics and shall reach a peak in the normal selection area. All fans shall be capable of operating over the minimum pressure class limits as specified in AMCA Standard 99.

construction — Fans shall be unhoused and incorporate a non-overloading type backward inclined airfoil blade wheel, heavy-gauge galvanized or finish painted steel frame and inlet plate.

frame and inlet Panel — Inlet plates shall be of heavy-gauge galvanized or finish painted steel construction. The inlet plate incorporates a removable spun inlet cone designed for smooth airflow into the accompanying inlet retaining ring of the fan wheel. A square, formed lip suitable for attachment of a boot connector shall surround the unit.

Wheel — Wheels shall have a spun non-tapered style blade retaining ring on the inlet side to allow higher efficiencies over the performance range of the fan. All wheels on direct drive arrangement 4 fans shall have airfoil shaped, extruded aluminum blades. All wheels shall be continuously welded around all edges. EPLFN wheels shall have nine blades for high efficiencies. EPLQN wheels shall have twelve blades for better sound quality. All wheels shall be statically and dynamically balanced on precision electronic balancers to a level of G6.3 (per ANSI 2-19) or better.

finish and coating — Fan shall be constructed of corrosion resistant galvanized or finish painted steel. Aluminum components shall be unpainted.

accessories — When specified, accessories shall be provided by Twin City Fan & Blower to maintain one source responsibility.

factory run test — All fans prior to shipment shall be completely assembled and test run as a unit at the specified operating speed or maximum RPM allowed for the particular construction type. Each wheel shall be statically and dynamically balanced in accordance with ANSI/AMCA 204-96 "Balance Quality and Vibration Levels for Fans" to Fan Application Category BV-3, Balance Quality Grade G6.3. Balance readings shall be taken by electronic type equipment in the axial, vertical, and horizontal directions. Records shall be maintained and a written copy shall be available upon request.

guarantee — The manufacturer shall guarantee the workmanship and materials for its EPLFN or EPLQN fans for at least one (1) year from startup or eighteen (18) months from shipment, whichever occurs first.

Engineering Data

siZeWheel

diameter(in.)

maX rPm (70°f)

Wr2

(lB-ft2)Wheel Weight

(lB)Bare fan Weight

(lB)ePlfn ePlQn ePlfn ePlQn ePlfn ePlQn

122 12.38 4000 0.9 2.1 9 10 56 57150 14.00 3909 1.7 3.3 12 13 69 70165 15.75 3468 2.9 5.2 15 17 97 99182 18.25 2930 6.1 7.2 18 20 118 120200 20.00 2674 7.4 8.4 21 24 138 141222 22.25 2403 12 14 30 34 195 199245 24.50 2183 21 24 35 39 240 244270 27.00 1981 29 35 40 46 292 298300 30.00 1783 51 59 54 61 362 369330 33.00 1620 76 87 67 77 431 441365 36.50 1465 112 129 79 91 582 594402 40.25 1329 165 190 93 107 789 803445 44.50 1202 253 294 135 150 1035 1050490 49.00 1091 391 451 164 183 1225 1244

Page 16: COMMERCIAL DUTY pLEnUM fAns - Industrial and …€¦ · 5 2Twin wCtnyFaa&CwinBll Application Guidelines Fan Selection Recommendations 1. System effect losses (see AMCA 201) and ple-num

IndustrIal & CommerCIal FansCentrifugal Fans | Utility Sets | Plenum & Plug Fans | Inline Centrifugal Fans

Mixed Flow Fans | Tubeaxial & Vaneaxial Fans | Propeller Wall Fans | Propeller Roof Ventilators

Centrifugal Roof & Wall Exhausters | Ceiling Ventilators | Gravity Ventilators | Duct Blowers

Radial Bladed Fans | Radial Tip Fans | High Efficiency Industrial Fans | Pressure Blowers

Laboratory Exhaust Fans | Filtered Supply Fans | Mancoolers | Fiberglass Fans | Custom Fans

TwIn cITy fan & blower | www.Tcf.com5959 Trenton lane n | minneapolis, mn 55442 | Phone: 763-551-7600 | fax: 763-551-7601

A Twin City Fan Company

2MWG12/11