commercial fastener coatings dörken · 2014-08-21 · dörken zinc-rich coating systems may be...
TRANSCRIPT
![Page 1: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/1.jpg)
DoD Workshop SUR/FIN 2010Commercial Fastener Coatings
Dörken
Mr. Albert GellesTechnical Manager, Doerken Corporation, USA.
![Page 2: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/2.jpg)
Report Documentation Page Form ApprovedOMB No. 0704-0188
Public reporting burden for the collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering andmaintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information,including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, ArlingtonVA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to a penalty for failing to comply with a collection of information if itdoes not display a currently valid OMB control number.
1. REPORT DATE JUN 2010 2. REPORT TYPE
3. DATES COVERED 00-00-2010 to 00-00-2010
4. TITLE AND SUBTITLE Commercial Fastener Coatings Dorken
5a. CONTRACT NUMBER
5b. GRANT NUMBER
5c. PROGRAM ELEMENT NUMBER
6. AUTHOR(S) 5d. PROJECT NUMBER
5e. TASK NUMBER
5f. WORK UNIT NUMBER
7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Doerken Corporation USA,11200 Cedar Knoll Drive ,Grass Lake ,MI,49240
8. PERFORMING ORGANIZATIONREPORT NUMBER
9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSOR/MONITOR’S ACRONYM(S)
11. SPONSOR/MONITOR’S REPORT NUMBER(S)
12. DISTRIBUTION/AVAILABILITY STATEMENT Approved for public release; distribution unlimited
13. SUPPLEMENTARY NOTES DOD Vehicle Workshop, 15-16 June 2010, Grand Rapids, MI. Sponsored by SERDP/ESTCP.
14. ABSTRACT
15. SUBJECT TERMS
16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT Same as
Report (SAR)
18. NUMBEROF PAGES
27
19a. NAME OFRESPONSIBLE PERSON
a. REPORT unclassified
b. ABSTRACT unclassified
c. THIS PAGE unclassified
Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18
![Page 3: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/3.jpg)
'AMKS DELTA• protects surfaces.
('!
•
~· ·
D c
![Page 4: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/4.jpg)
DörkenA manufacturer, developer, and supplier of zinc-rich corrosion protective coating systems and technology.
Primary Products and Trademarks:DELTA®-TONE 9000 (Zinc Rich Basecoat)DELTA-PROTEKT® KL 100 (Zinc Rich Basecoat)DELTA®-SEAL (Organic Sealer, multiple colors)DELTA-PROTEKT® VH (Clear Water-based sealer)DELTACOLL® (Inorganic Sealer, multiple colors)
![Page 5: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/5.jpg)
Ewald Dörken AG.Founded 1892740 Employees, Exports to 30 countries, MKS reps. in 12 countriesGlobal Tech-Center, Production, R&D located in Herdecke , Germany~$250 Million Annual Sales
![Page 6: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/6.jpg)
Germany
All product is manufactured in Germany
Benefits include:
Global consistency
Centralized R&D
Environmental Compliance
Global availability
Central Manufacturing
![Page 7: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/7.jpg)
Sweden
Germany
U.K.
TN
KY
IL
IN MI
PA
Canada
Japan
Australia
Africa
Mexico
Brazil
Spain
Finland
Hungary
Turkey
Czech Rep
Belgium
Denmark
FranceItaly
Switzerland
Russia
China
TaiwanIndia
Korea
Argentina
CA
CTMN
Dörken MKS-Systems worldwideGlobal Applicator List Available @ www.doerken-mks.com (infocenter, job coater)
![Page 8: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/8.jpg)
NA Technical Center 11200 Cedar Knoll Drive - Grass Lake, MI 49240
![Page 9: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/9.jpg)
Technical Center - Fastener Application Testing
Torque, Tension, Angle, Friction Testing
![Page 10: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/10.jpg)
Technical Center – Coating Examination Testing
• Coating Thickness: X-Ray Fluorescence (Fischerscope)• Coating Examination: Nikon Microscope• Temperature and Humidity: ESPEC Platinous Chamber with Yokogawa Recorder
![Page 11: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/11.jpg)
Technical Center – Corrosion Testing
• Cyclical Corrosion: Auto Technology Cyclical Corrosion Chamber• Neutral Salt Spray Testing: Auto Technology Corrosion Test Chamber
![Page 12: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/12.jpg)
The Delta-MKS Division of Dörken
•Over 30 years manufacturing and developing Zinc-Rich Corrosion Protective coating systems. (Delta®-Tone 9000)•Solvent Based Chemistry Zinc-Rich Basecoats and Organic Topcoats.•Water Based Chemistry for Clear Silicate Topcoats (Delta-Protekt® VH Series)•All Products are Composed of High Grade Materials which ensures the highest quality attributes in the finished product.
![Page 13: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/13.jpg)
Micro coating anti-corrosion systems
DELTACOLL® (Inorganic)
BasecoatZn-Flake
DELTA® -SEAL (Organic)
DELTA ®-Tone 9000 (Inorganic)DELTA-PROTEKT®
KL 100 (Inorganic)
Topcoat for Zn-Flake Basecoat & Phosphate
Topcoat for Electroplating
DELTA-PROTEKT®
VH 300, 301, & 302 (Inorganic Water based)
DELTA PROTEKT®
VH 350, 351, & 352(Inorganic Water based)
DELTA®-LubeClear, Blue & Green (Organic Water Based)
DELTA-PROTEKT®
KL 108 (Inorganic/Hi CoF)
Product Lines
DELTA-PROTEKT®
KL 101 (Inorganic)
DELTA-PROTEKT®
KL 105 (Inorganic/Integral Lube)DELTA-PROTEKT®
VL 411 & 450 (UV) (Organic)
![Page 14: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/14.jpg)
Composition:• >70% Zinc Metal in Milled Flake Form• Titanium Binder• ~10% Aluminum
In Applied Form:• Typical Coating Thickness <10µm• Conductive• Silver / Grey Appearance
May Be Applied To:• Bare Steel Substrates (Degreased)• Zn or Fe Phosphated Substrates• Other Metal Alloy Substrates
Zinc- & Alu- Flakes
steel
Zinc Rich Basecoats: DELTA® -Tone 9000 and DELTA-PROTEKT® KL 100
![Page 15: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/15.jpg)
Dörken Zinc-Rich Coating SystemsMay be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing. (Thin coating system, 5-25 µm)No Hydrogen Embrittlement Due to Process Technique
Suitable for High Strength Fasteners.
Always Chromium (VI)-freeIntegrated Friction Modification for Consistent Torque in Assembly
Average µtot = 0.10 – 0.16 (ISO16047)Multiple friction levels available
High Corrosion ProtectionASTM B117, ISO 9227 > 1000 Hours No Red CorrosionASTM G85 Annex 4 (S02) > 1000 Hours No Red Corrosion GM9540P > 120 CyclesSAE J2334 > 80 Cycles
![Page 16: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/16.jpg)
DELTA®-TONE + DELTA®-SEAL
0 h SST 480 h SST
960 h SST 2000 h SST end of test without any red rust
![Page 17: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/17.jpg)
120 Cycles GM9540P – Delta-Protekt KL 100 and Delta-Seal GZ Silver
![Page 18: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/18.jpg)
ASTM G85-02 Annex 4 – Salt Fog/SO2
Delta-Protekt KL 100 and Delta-Seal GZ Silver: 1008 Hours ASTM G85-02 Annex 4
![Page 19: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/19.jpg)
Delta-Protekt KL 101>5000 Hours ASTM B117
![Page 20: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/20.jpg)
General application process.
DegreasingShot blastingPhosphating**partly recommended
Dip SpinningDippingSprayingSpin coating
Conveyor oven box ovenInductive drying
Pretreatment Coating Preheating Curing Cooling
![Page 21: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/21.jpg)
Application Techniques - Dip Spin Coating
Gurtbnd Cross BarTranspo" Band
beiCifteiE Vo12one Vent llated Pre .Zone
Cros~ Bar T ransrt 8and g11bellei<ter Dim;hiiiiiMroc:knar Gasfl!lllte<l COI\tif'IJOUS Dryer Cooling Zone Contaillllf
![Page 22: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/22.jpg)
Coating application techniques.
![Page 23: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/23.jpg)
Performance Specifications:• ISO 10683 Fasteners-Non-electrolytically applied zinc flake coatings• ASTM – Pending• GMW 3359
![Page 24: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/24.jpg)
Our markets.
![Page 25: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/25.jpg)
Approved by all major OEMs worldwide*
*just a selection
![Page 26: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/26.jpg)
Wind Energy Applications 15 years experiences protecting rotorblade assemblies:
DELTA®-TONE + DELTA®-SEAL
![Page 27: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/27.jpg)
Specification approval of the DELTA-MKS® systems.
Wind turbine manufacturer SpecificationAcciona Windpower (ES) CS0129
BARD Engineering (GER) Germanischer Lloyd Guidelines
Enercon (GER) MK06000-0
Fuhrländer/W2E (GER) W0402-G03-DASH
Gamesa Eólica (ES) EQ630001
GE- Wind Energie (USA) P14A-AL-0218
Kenersys (IND) KSY_SPC_bolt
Suzlon (IND) M0606600
Vestas (DK) ERP 900182
Nordex (GER)Repower Systems (GER)Siemens Wind Power (DK)
In process
![Page 28: Commercial Fastener Coatings Dörken · 2014-08-21 · Dörken Zinc-Rich Coating Systems May be applied to fasteners ≥M6. Smaller fastener sizes possible with special processing](https://reader034.vdocument.in/reader034/viewer/2022042205/5ea73101d02e295774033b3f/html5/thumbnails/28.jpg)
Contact Information
Fred Schultz
Vice President, North AmericaTelephone : 1 (517) 522-4600
eMail : [email protected]
Steve Wilde
Technical SalesTelephone: 1 (586) 855-8775
eMail : [email protected]
Ron Strong
Fastener SpecialistTelephone: 1 (517) 522-4600
eMail : [email protected]
Albert Gelles
Technical ManagerTelephone: 1 (517) 522-4600
eMail : [email protected]
Sur/Fin 2010 Exhibitor – Booth #102
www.doerken-mks.com