commercial heating - ferroli...commercial heating ferroli limited ferroli began producing heating...
TRANSCRIPT
Commercial Heating
Commercial Heating
FERROLI LIMITEDFerroli began producing heating appliances and equipment in Italy
during the 1950s. Today, the company is still family-owned but now
operates ten ultra-modern factories in Europe, employing over 2,500
people and producing a wide range of wall hung, cast iron and welded
steel boilers, making Ferroli one of the largest and most successful
heating appliance manufacturers in the world.
FERROLI COMMERCIAL AND INDUSTRIAL BOILERSThe commercial and industrial boiler range covers wall hung and floor
standing steel and cast iron designs, condensing, atmospheric, pressure
jet units, gas and oil models. Outputs range from 50kW to 14,000kW.
Other products include heat pumps, cylinders, solar heating and
plate heat exchangers. Ferroli’s UK warehouse, backed by its huge
manufacturing facility in Italy, offers delivery ex-stock for most smaller
boiler models and for all frequently used parts. It also assembles and
commissions sectional boilers in the UK to suit particular requirements.
Commercial Boilers
Pressure Jet Boilers
Atmospheric Boilers
Condensing Boilers
Index
Wall Mounted Econcept 51A Page 4
Energy Top Page 6
Floor Standing Econcept 101 Page 8
Energy Top Page 10
Pegasus N Page 12
Atlas A Page 14
Atlas D Page 16
GN2 Range Page 18
GN4 Range Page 20
Prextherm RSW Quadra Page 22
Prextherm RSW Tonda Page 24
Prextherm RSH Quadra Page 26
Prextherm RSH Tonda Page 28
Industrial Heating Vapoprex LVP Page 30
Vapoprex HVP Page 30
Vapoprex 3GF Page 30
Vapoprex 3GN Page 30
Prextherm RSW/RSH Page 31
Prextherm T3G Page 31
Prextherm T3G ASL Page 31
Prextherm ASH/ASL Page 31
Prextherm 3GN AS Page 31
Prextherm 3GF Page 31
Cylinders Aquacyl Twin Coil Page 32
Heat Pumps HXA Page 34
HXP Page 36
Solar Aquasol XS Page 38
Aquacyl Page 40
Ecotop Page 42
PRODUCTIONThe division, ISO 9001 certified by TÜV SUD, operates in production facilities
covering twenty thousand square metres, including the factory, technical and
design offices and management-sales departments. Ferroli Industrial Heating
adopts a “project” approach: a team of professionals that can satisfy all
customer needs, the best technology applied in the production department
and the use of materials and processes compliant with EN standards mean
that all products are CE marked and approved in various foreign countries.
The manufacturing flexibility of the Ferroli facilities allows the company to
respond to a vast variety of market demands, from simple heating systems to
sophisticated installations for district heating and serving production plants.
Specialist engineers and technicians conduct level two non-destructive testing
(ultrasound, X rays, liquid penetrants) and various welding procedures qualified
by the Italian Welding Institute, according to the standard EN ISO 3834,
involving all the welding featured in our projects, including submerged
arc and TIG welding, welding with basic electrodes and flux-cored welding.
The investments made have allowed a high level of automation to be
reached in the cutting and welding process.
ENERGY SAVINGS, QUALITY AND EFFICIENCYThe current national and international energy market situation requires
constant attention in order to achieve and maintain high efficiency in the use
of thermal energy. Our generators are designed with large heat exchange
surfaces and are fitted with heat recovery units and economisers. These
features considerably increase efficiency and at the same time significantly
reduce both heat loss and running costs. The Ferroli systems also have a low
environmental impact, complying with even the strictest standards in terms
of atmospheric emissions and efficiency parameters.
TECHNOLOGY AND RESEARCHTechnology, research and special care paid to quality are the elements that
define the entire manufacturing procedure of the Industrial Heating Division.
Ferroli Industrial Heating implements an advanced design system, with a
3D drawing program, selects very high quality raw materials and accessories,
and pays meticulous care to every phase in construction, using specialist
personnel with proven experience and the most modern cutting and welding
equipment. Intelligent and effective management of the entire heating plant
is one of the crucial aspects of all modern companies that want to rationally
exploit the heat generated by their boilers.
SERVICEFerroli Industrial Heating guarantees its customers a high level of service.
The quality of our service is a decisive factor in every sale and every stage in
after-sales support. The company implements ongoing training to ensure the
maximum professionalism of our service centres, our technicians and our
installers. The company can provide service on systems and products
in all situations. This ability to serve the customer in relation to any type of
need that may arise has made Ferroli Industrial and Commercial Heating the
benchmark in terms of Customer Satisfaction.
3
Features and Benefits
Modulating high efficiency premix condensing boiler for heating installations
Modular installation without the need of additional controllers
Microprocessor controls
Independent external switching of controls to maximise efficiency
Hot surface ignition with independent flame detection probe
Low water pressure protection switch
Independent internal 6 bar safety valve
Can be used on pressurised systems or open vented systems where min. 1 bar is available
Modular boiler control –The Econcept 51A is ready for modular application. The heat output
of the various modules can be optimised according to the heating load of the system
Modular, premix, condensingheat generators, with veryhigh efficiency and very lowpolluting emission, operatingon natural gas or LPG. These generators have beendesigned to be installed inmodular configurations, (upto five) to extend the benefitsof high-efficiency heating tolarger applications.
4
2 year*
parts & labourGuarantee
Econcept 51A – Wall mountedWall mounted modulating condensing boiler for heating
with premix burner with very low emissions
5
PUMP ACCESSORY KIT (Code 042034X0)For the advanced management of an external hot water cylinder the boiler can be fitted with a special kit which allows the pump for the hotwater cylinder and the return connection to behoused directly in the boiler. The electronic board manages priority of the hot water cylinder,switched by the cylinder’s control stat. When thecylinder is satisfied the boiler automaticallyreturns to heating mode.
TREVERSE FLAME CERAMIC BURNERSThe ECONCEPT 51A modules feature premixceramic burners with reverse micro-flame, eachmade up of six plates fastened via a specialgasket to a metal frame capable of absorbingthermal expansion. These burners have very lowpolluting emissions, both NOx and CO2.
HEAT EXCHANGERSThe heat exchangers design, build and materials ensure high efficiency, constantperformances reliability.
CASCADING OPERATIONThe ECONCEPT 51A series modules have beendeveloped for connection in series to make up asingle heat generator that, in steps of 50kW, canhave a total output up to 250kW. Each withelectronic programming to ensure the optimumoperation from 11kW to 250kW.
Control boardEach ECONCEPT 51A is fitted with a user friendlymulti-function display panel, which controls allbasic operations. It will control up to fivecombustion units and handles the central heatingpump plus a second pump or diverting selectorvalve for the hot water storage cylinder.
Technical specificationsEconcept 51A
Heat input in central heating operation max. kW 49.8
min. kW 11.2
Heat output in central heating max. kW 48.8
operation (80-60°C) min. kW 11.0
Heat output in central heating max. kW 53.0
operation (50-30°C) min. kW 12.0
Operating pressure max. bar 6.0
min. bar 0.8
Height mm 720
Width mm 630
Depth mm 380
All connections Ø 3/4"
Water circuit content l 10
Max outlet temperature °C 95.0
Index of protection IP X5D
Power supply voltage V/Hz 230/50
Power input W 190
Empty weight kg 124.0
Type of appliance B23
Efficiency
Efficiency (80-60°C) Pmax % 98.0
Pmin % 98.5
Efficiency (50-30°C) Pmax % 106.4
Pmin % 107.5
Efficiency 30% (30°C) % 109.0
NOx class 5
Features and Benefits
Modulating high efficiency premix condensing boiler for heating installations
Modular installation without the need of additional controllers
Microprocessor controls
Independent external switching of controls to maximise efficiency
Hot surface ignition with independent flame detection probe
Low water pressure protection switch
Independent internal 6 bar safety valve
Can be used on pressurised systems or open vented systems where min. 1 bar is available
Modular boiler control –The Energy Top W is ready for modular application. The heat output
of the various modules can be optimised according to the heating load of the system
Unique spiral corrugated heat exchanger
Suitable for heating only systems,featuring high energy savings and are environmentally-friendly (4 star energy rating). Cascadingconnection of multiple generators can be performed using special fluegas and water circuit accessories.The models are configured foroperation on natural gas but can be converted to LPG using a specialconversion kit.
Energy Top – Wall mounted Wall mounted heat generators featuring a premix burner, condensing
operation, very high efficiency and very low polluting emissions.
6
2 year*
parts & labourGuarantee
FURNACEThe new total premixed air-gascombustion unit with variable speedfan, pneumatic gas valve and cylindricalmetal fibre burner allows a range ofmodulation that, depending on themodel, can extend from 11 to 100% ofrated output, with efficiency exceeding107%. The very low emissions – NOxand CO2 – as well as minimising theenvironmental impact, also ensures theheat exchanger remains clean overtime, reducing maintenance.
ELECTRONIC CONTROLThe evolved electronics on ENERGYTOP can manage situations in whichmultiple heat generators are used incascade, minimising the configurationand commissioning operations.
CASCADING OPERATIONMultiple generators can be linked.The models are factory configured for operation on natural gas and can be converted to LPG using a special conversion kit.
7
Technical specificationsW80 W125
Output and Efficiency
Heat input, central heating max. kW 75.0 116.0
min. kW 17.0 25.0
Heat output, central heating max. (80 - 60°C) kW 73.5 113.7
min. (80 - 60°C) kW 16.7 24.6
max. (50 - 30°C) kW 79.5 123.0
min. (50 - 30°C) kW 18.3 26.9
Efficiency Pmax (80 - 60°C) % 98.0 98.0
Pmin (80 - 60°C) % 98.5 98.5
Pmax (50 - 30°C) % 106.0 106.0
Pmin (50 - 30°C) % 107.5 107.5
30% (30°C) % 109.0 109.0
Efficiency class Directive 92/42 EEC ★★★★ ★★★★NOx class 5 5
Central heating operating pressure max-min. bar 6-0.8 6-0.8
Central heating temperature max. °C 95 95
Max exchanger Δt °C 40 40
Water content litres 5 7
Electrical specifications
Index of protection IP X5D X5D
Power supply voltage V/Hz 230/50 230/50
Power input (not including the pump) max. W 95 200
Structural characteristics
Weight kg 46 51
Height mm 900 900
Width mm 445 445
Depth mm 430 430
Water circuit
Outlet/return fittings inches 11/2" 11/2"
Gas fitting inches 1" 1"
Combustion data
Losses through the stack with burner ON at Pmax-Pmin % 2.2-1.3 1.8-1.3
Losses through the casing with burner ON at Pmax-Pmin % 0.2-0.2 0.2-0.2
Losses through the stack with burner OFF % 0.03 0.02
Losses through the casing with burner OFF % 0.4 0.4
Flue gas temperature at Pmax-Pmin (80/60) °C 65-60 67-60
(50/30) °C 43-33 45-34
Flue gas flow-rate at Pmax-Pmin kg/h 126.2-30.1 195.2-44.3
Condensate flow-rate at Pmax-Pmin kg/h 8.7-2.0 13.5-3.2
CO2 at Pmax-Pmin (G20) % 9.0-8.5 9.0-8.5
CO2 at Pmax-Pmin (G31) % 10-9.2 10-9.2
CO weighted mg/kWh 35.0 35.0
NOx weighted mg/kWh 29.0 29.0
Features and Benefits
Modulating high efficiency premix condensing boiler for heating installations
Vertical modular structure with built-in manifold pipework
Dual heat exchangers with independent microprocessor controls
Independent external switching of controls to maximise efficiency
Hot surface ignition with independent flame detection probe
Low water pressure protection switch
Independent internal 6 bar safety valves
Boiler manifold can be bolted directly together; minimises use of space and installation time
Can be used on pressurised systems or open vented systems where min. 1 bar is available
Modular boiler control –The Econcept 101 is ready for modular application. The heat output
of the various modules can be optimised according to the heating load of the system
Modular, premix, condensingheat generators, with veryhigh efficiency and very lowpolluting emission, operatingon natural gas or LPG. These generators have beendesigned to be installed inmodular configurations, (upto five) to extend the benefitsof high-efficiency heating tolarger applications.
Econcept 101– Floor standingFloor standing, modulating condensing boiler for heating with dual
heat exchanger and double premix burner with very low emissions
8
2 year*
parts & labourGuarantee
9
Technical specifications
Econcept 101
Output max/min.
Heat input kW 99.6/11.2
Useful heat output 80°C - 60°C kW 97.6/11.0
Useful heat output 50°C - 30°C kW 106.0/12.0
Efficiency (net)
80°C - 60°C Full load % 98.0
50°C - 30°C % 106.4
Part load (30%) % 109.0
NOx emissions
Class 5
Gas supply (natural gas G20)
Supply pressure mbar 20.0
Flow rate max/min m3/h 10.54/1.19
Gas supply (LPG G31)
Supply pressure mbar 37.0
Flow rate max/min kg/h 7.8/0.88
Central heating
Maximum operating pressure bar 6
Hot water content litres 12.8
Dimensions, weights, fittings
Height mm 1650
Width mm 704
Depth mm 410
Weight (empty) kg 150
Gas fitting DN50
Central heating fittings DN80
Power supply
Max power input W 380
Power supply voltage/frequency V/Hz 230V/50Hz
Index of protection IP X5D
TREVERSE FLAME CERAMIC BURNERSThe ECONCEPT 101 modules featurepremix ceramic burners with reverse micro-flame, each made up of six platesfastened via a special gasket to a metalframe capable of absorbing thermalexpansion. These burners have very lowpolluting emissions, both NOx and CO2.
HEAT EXCHANGERSThe heat exchangers design, build andmaterials ensure high efficiency, constantperformances reliability.
CASCADING OPERATIONThe ECONCEPT101 series modules havebeen developed for connection in series tomake up a single heat generator that, insteps of 50kW, can have a total output ofaround 500kW. Each with electronicprogramming to ensure the optimumoperation from 11kW to 500kW.
Energy Top – Floor standingFloor standing cabinet heat generators featuring a premix burner,
condensing operation, very high efficiency and very low polluting emissions
10
2 year*
parts & labourGuarantee
Features and Benefits
Low emissions – NOX and CO2
Individual and multiple configurations
4 star energy rating
Painted steel insulated cabinet, with reversible door (left-right) for B80 and B125 units only
Natural gas and can be converted to LPG using a special conversion kit
The range features four sizes, two with single burner and two with double burners
Cascade configurations suitable for different types of flue options
Boiler manifold can be bolted directly together; minimises use of space and installation time
Can be used on pressurised or open vented systems where min. 1 bar is available
Suitable for heating systems only,featuring high energy savings and are environmentally-friendly (4 star energy rating). Cascading connection of multiplegenerators can be performedusing special flue gas and water circuit accessories.The models are configured for operation on natural gas but can be converted to LPGusing a special conversion kit.
The water circuit in cabinet modules, compared to the wall-hung versions, is already included asstandard with all the components required for complete and correct installation in the boiler room.Each unit is connected to the central heating outlet and return water manifolds via 3-way on-offvalves with atmospheric discharge and fixed speed pump.
11
Technical specificationsB80 B125 B160 B250
Output and Efficiency
Heat input, central heating max. kW 75.0 116.0 150.0 232.0
min. kW 17.0 25.0 17.0 25.0
Heat output, central heating max. (80 - 60°C) kW 73.5 113.7 147.0 227.4
min. (80 - 60°C) kW 16.7 24.6 16.7 24.6
max. (50 - 30°C) kW 79.5 123.0 159.0 246.0
min. (50 - 30°C) kW 18.3 26.9 18.3 26.9
Efficiency Pmax (80 - 60°C) % 98.0 98.0 98.0 98.0
Pmin (80 - 60°C) % 98.5 98.5 98.5 98.5
Pmax (50 - 30°C) % 106.0 106.0 106.0 106.0
Pmin (50 - 30°C) % 107.5 107.5 107.5 107.5
30% (30°C) % 109.0 109.0 109.0 109.0
Efficiency class Directive 92/42 EEC ★★★★ ★★★★ ★★★★ ★★★★NOx class 5 5 5 5
Central heating operating pressure max-min. bar 6-0.8 6-0.8 6-0.8 6-0.8
Central heating temperature max. °C 95 95 95 95
Max exchanger Δt °C 40 40 40 40
Water content litres 13 15 26 30
Electrical specifications
Index of protection IP X5D X5D X5D X5D
Power supply voltage V/Hz 230/50 230/50 230/50 230/50
Max power input (not including the pump) W 285 390 570 780
Structural characteristics
Weight kg 110 115 190 210
Height mm 1700 1700 1700 1700
Width mm 500 500 1000 1000
Depth mm 450 450 450 450
Water circuit
Outlet/return fittings inches DN100 DN100 DN100 DN100
Gas fitting inches DN65 DN65 DN65 DN65
Combustion data, single furnace
Type of appliance B23 B23 B23 B23
Losses through the stack with burner ON at Pmax-Pmin % 2.2-1.3 1.8-1.3 2.2-1.3 1.8-1.3
Losses through the casing with burner ON at Pmax-Pmin % 0.2-0.2 0.2-0.2 0.2-0.2 0.2-0.2
Losses through the stack with burner OFF % 0.03 0.02 0.03 0.02
Losses through the casing with burner OFF % 0.4 0.4 0.4 0.4
Flue gas temperature at Pmax-Pmin (80/60) °C 65-60 67-60 65-60 67-60
Flue gas temperature at Pmax-Pmin (50/30) °C 43-33 45-34 43-33 45-34
Flue gas flow-rate at Pmax-Pmin kg/h 126.2-30.1 195.2-44.3 126.2-30.1 195.2-44.3
Condensate flow-rate at Pmax-Pmin kg/h 8.7-2.0 13.5-3.2 8.7-2.0 13.5-3.2
CO2 at Pmax-Pmin (G20) % 9.0-8.5 9.0-8.5 9.0-8.5 9.0-8.5
CO2 at Pmax-Pmin (G31) % 10-9.2 10-9.2 10-9.2 10.-9.2
CO weighted mg/kWh 35.0 35.0 35.0 35.0
NOx weighted mg/kWh 29.0 29.0 29.0 29.0
Features and Benefits
A range of outputs from 51 to 289 kW
Stainless steel main burner
Double body gas valve with shut-off devices controlled by the regulating and safety thermostats
Flue gas safety thermostat
Electronic ignition with ionising flame regulation with reset button and intermittent pilot burner
Main switch
Temperature/pressure gauges
Regulating thermostat
Safety thermostat
Automatic air vent valve
Pressure stabiliser and gas pressure gauge
Drain cock
Flue gas test point on flue gas chamber
High efficiency
cast iron floor
standing boiler
with atmospheric
burner for the
production of
hot water for
central heating
installations.
Pegasus NGas-fired cast iron floor boiler with atmospheric burner
12
2 year*
parts & labourGuarantee
13
Technical specificationsPegasus N F2 51 F2 68 F2 85 F2 102 F3 119 F3 136 F3 153 F3 170 F3 187 F3 221 F3 255 F3 289
Heat output kW 51 68 85 102 119 136 153 170 187 221 255 289
Btu x1000 174 232 290 348 406 464 522 580 638 754 870 986
Rated heat input nett kW 56 74.8 93 112 131 149 168 187 206 243 280 317
Btu x1000 191 255 317 382 447 508 573 638 703 829 955 1082
Design Flow rate at 82ºC/71ºC litre/sec 1.10 1.47 1.84 2.21 2.56 2.90 3.30 3.67 4.03 4.76 5.49 6.23
Minimum flow rate litre/sec 0.44 0.59 0.74 0.88 1.02 1.16 1.32 1.47 1.61 1.90 2.20 2.50
Boiler water content litres 22 25 30 34 38 42 46 50 54 62 70 78
Maximum working pressure bar 4 4 4 4 4 4 4 4 4 4 4 4
Sections 4 5 6 7 8 9 10 11 12 14 16 18
Dimensions A mm 550 640 720 800 930 1020 1100 1190 1270 1440 1610 1780
B mm 103 103 103 103 133 148 148 173 173 173 198 198
C Ø mm 180 180 200 200 220 250 250 300 300 300 350 350
D mm 43 46 44 42 50 53 58 60 58 57 62 66
E mm 35 38 36 34 42 45 43 46 44 45 46 49
F mm 900 900 900 900 1050 1050 1050 1050 1050 1050 1100 1100
Connections a1 11/2" 11/2" 11/2" 11/2" 2" 2" 2" 2" 2" 2" 2" 2"
a2 11/2" 11/2" 11/2" 11/2" 2" 2" 2" 2" 2" 2" 2" 2"
a3 3/4" 3/4" 3/4" 3/4" 1" 1" 11/2" 11/2" 11/2" 11/2" 11/2" 11/2"
Principal gas nozzles no. 3 4 5 6 7 8 9 10 11 13 15 17
Elec. power supply V/Hz 230/50 230/50 230/50 230/50 230/50 230/50 230/50 230/50 230/50 230/50 230/50 230/50
Total power input Watt 20 20 20 20 32 32 60 60 60 60 60 60
Weight (with packaging) kg 250 300 350 400 470 530 575 625 665 760 875 945
KEY
a1 central heating return inlet
a2 central heating flow outlet
a3 gas input
PEGASUS F2 N PEGASUS F3 N
Features and Benefits
New compact design
High efficiency cast iron boiler body
Silent operation thanks to low flues turbulence
Widely copes with requirements for 2 stars efficiency according to directive 92/42 EEC
New analogue control panel with smart fume cover
Control board includes thermometer and pressure gauge, ignition switch, safety thermostat with
manual reset and temperature setting knob
Optional range of one and two stage* burners to be easily fitted, both for gas or liquid fuel
* Two stage only available on Atlas A 95
3 pass-flue floor standing
boiler, only heating,
for oil or gas jet burner.
Atlas AFloor Standing Boiler
14
2 year*
parts & labourGuarantee
Equipped with a user-friendly,
control panel.
15
Technical specifications
Atlas A 32 47 62 78 95
Max thermal output kW 32 47 62 78 95
Max thermal capacity kW 34.9 51.6 67.7 85.6 103
Water content litres 18 23 28 33 38
Efficiency Pmax (80°– 60°C) % 91.7 91.1 91.5 91.1 92
Max. heating operating pressure bar 6 6 6 6 6
Dimensions D mm 400 500 600 732 832
B Ø mm 115 115 115 115 115
F Ø mm 120-130 120-130 120-130 120-130 120-130
Empty weight kg 127 166 205 244 283
Number of sections 3 4 5 6 7
IP protection rate IP X0D X0D X0D X0D X0D
500
B
F
850
105 105145 145
1
2
3
KEY
1 system delivery Ø 11/2"
2 system return Ø 11/2"
3 heating system drain cock 1/2"
Features and Benefits
High performing three-pass cast iron section
3 star efficiency according to EN 92/42 CEE
Digital control panel suitable for connection to opentherm remote control and outdoor probe
Evolved digital interface for settings and monitoring of CH-DHW temperatures and advanced features
(economy, outside temperature compensation, troubleshooting)
Self-diagnostic micro processor
Central Heating frost protection system
Easy-to-maintain thanks to hinged combustion chamber door
New compact design
Built-in handling of a DHW tank
Floor standing cast iron boiler, oil or gas fired, for central heating.A smart compact design withadvanced technology. Highefficency, low fuel consumptionand low emissions.
Atlas DThree-pass cast iron floor standing boiler
16
2 year*
parts & labourGuarantee
17
500 D
850
105 105145 145
1
2
3B
F
KEY
1 system delivery Ø 11/2"
2 system return Ø 11/2"
3 heating system drain cock 1/2"
Technical specifications
Atlas D 30 42 55 70 87
Heat output kW 30 42 55 70 87
Heat input kW 32.2 45 58.8 74.7 93
Heating water content litres 18 23 28 33 38
Efficiency Pmax (80°– 60°C) % 93 93,3 93,5 93,7 94
Working pressure in heating bar 6 6 6 6 6
Dimensions D mm 400 500 600 732 832
B Ø mm 115 115 115 115 115
F Ø mm 120-130 120-130 120-130 120-130 120-130
Empty weight kg 127 166 205 244 283
Number of Sections 3 4 5 6 7
Index of protection IP X0D X0D X0D X0D X0D
Features and Benefits
Ferroli boilers are manufactured from high quality cast iron and are designed for a reliable
long life – with a 10-year manufacturer’s material guarantee on the cast iron work
All GN models are suitable for natural gas, LPG or oil-fired pressure jet burners, with a dual fuel option
The GN range is a highly efficient boiler with on/off, high/low or modulating burner operation
We can also supply pre-mix burners which are fully modulating, low NOX and quiet
High efficiency, reduce fuel consumption
Boiler body is insulated with high density mineral fibre to minimise heat loss from the heat exchanger
GN2 models have a double-pass heat exchanger
Designed for use with fully pumped indirect systems operating at working pressures up to 6 bar at
90ºC flow temperature
The pre-wired control panel is housed in a stylish casing and incorporates: on/off illuminated
switches; high/low thermostatic control with limit thermostat (manual re-set); and a
temperature and pressure gauge
Front access for ease of maintenance and minimum side clearance required
Suitable for modular installations
High efficiency heatgenerators for theproduction of hot waterfor central heatinginstallations servingmedium to largeresidential or industrialpremises. The GN rangeof boilers is availablefor pressure jet oil,forced air gas or dualfuel with a range ofburners for ON/OFF orhigh/low operation.
GN2Gas, oil or dual fuel, cast iron, free-standing boilers
18
2 year*
parts & labourGuarantee
19
Technical specifications
Number of sections 05 06 07 08 09 10 11 12 13 14
Delivered heat output max. kW 90 108 126 144 162 180 198 216 234 252
min. kW 73 87 101 115 129 143 157 171 185 199
Heat input max. kW 98.8 117.4 136.9 156.5 176.0 195.6 215.2 234.7 254.3 273.9
min. kW 80 95 110 125 140 155 170 185 200 215
Water content litres 49 57 65 73 81 89 97 105 113 121
Design flow rate @ Δt 11ºC litres/sec 1.95 2.35 2.74 3.13 3.52 3.91 4.3 4.7 5.01 5.47
Water pressure loss @ Δt 11ºC mb 2.8 3.4 4.8 6.5 8.5 11 13 16 19 23
Design flow rate @ Δt 20ºC litres/sec 1.07 1.29 1.5 1.72 1.93 2.15 2.36 2.58 2.79 3.00
Water pressure loss @ Δt 20ºC mb – – 0.5 0.8 1.8 2.2 2.6 3.2 4.0 4.5
Water pressure max bar 6 6 6 6 6 6 6 6 6 6
Static head min m 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1
Flow rate min litres/sec 0.72 0.86 1.0 1.15 1.29 1.43 1.58 1.72 1.86 2.0
Input gas rate max m3 13 15 17 20 22 24 27 29 32 33
Working pressure boiler gas mb 20 20 20 20 20 20 20 20 20 20
Max gas inlet gas pressure mb 25 25 25 25 25 25 25 25 25 25
Draught required @ boiler flue outlet mb 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02
Pascal 2 2 2 2 2 2 2 2 2 2
Burner pressure as Burner manufacturers data
Flue gas volume @ NTP m3 140 159 196 218 247 273 305 326 370 402
Flue gas temperature ºC 220 220 220 220 220 220 220 220 220 220
Boiler flue gas resistance mb 0.3 0.31 0.32 0.33 0.34 0.36 0.37 0.38 0.39 0.40
Electric supply 230v 50Hz Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Combustion chamber Δp mbar 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4
Combustion chamber volume litres 63 77 91 104 118 132 146 160 174 187
Dimensions Height mm 1196 1196 1196 1196 1196 1196 1196 1196 1196 1196
Width mm 600 600 600 600 600 600 600 600 600 600
Depth mm 647 757 867 977 1087 1197 1307 1417 1527 1637
Blast tube diameter mm 130 130 130 154 154 154 154 154 154 154
Flue diameter mm 180 180 200 200 200 200 200 200 200 200
Fittings Water flow/return ND80 3 3 3 3 3 3 3 3 3 3
Drain cock inches 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4"
Gas inlet connection as Burner manufacturers data
Weight kg 310 361 412 463 514 565 616 670 725 780
Clearance Front (min) mm 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
Rear (min) mm 800 800 800 800 800 800 800 800 800 800
Side (min) mm 200 200 200 200 200 200 200 200 200 200
20
2 year*
parts & labourGuarantee
Features and Benefits
Ferroli boilers are manufactured from high quality cast iron and are designed for a reliable long
life – with a 10-year manufacturer’s material guarantee on the cast iron work
All GN models are suitable for natural gas, LPG or oil-fired pressure jet burners, with a dual fuel option
The GN range is a highly efficient boiler with on/off, high/low or modulating burner operation
We can also supply pre-mix burners which are fully modulating, low NOX and quiet
High efficiency, reduce fuel consumption
Boiler body is insulated with high density mineral fibre to minimise heat loss from the heat exchanger
GN4 has a triple-pass heat exchanger for maximum heat transfer and ultra-high operating efficiency
Designed for use with fully pumped indirect systems operating at working pressures up to 6 bar at
90ºC flow temperature
The pre-wired control panel is housed in a stylish casing and incorporates: on/off illuminated
switches; high/low thermostatic control with limit thermostat (manual re-set); and a
temperature and pressure gauge
Front access for ease of maintenance and minimum side clearance required
Suitable for modular installations
High efficiency heatgenerators for theproduction of hot waterfor central heatinginstallations servingmedium to largeresidential or industrialpremises. The GN rangeof boilers is availablefor pressure jet oil,forced air gas or dualfuel with a range ofburners for ON/OFF orhigh/low operation.
GN4Gas, oil or dual fuel, cast iron free-standing boilers
21
Technical specifications
Number of sections 07 08 09 10 11 12 13 14
Delivered heat output max. kW 200 250 300 360 420 480 560 650
min. kW 120 150 180 215 250 290 330 390
Heat input max. kW 217 270 324 388 452 516 600 695
min. kW 128 160 192 229 266 309 352 416
Water content litres 143 163 183 203 223 243 263 283
Design flow rate @ Δt 11ºC litres/sec 4.32 5.39 6.46 7.75 9.08 10.4 12.1 14.1
Water pressure loss @ Δt 11ºC mb 66 99 139 178 215 254 292 331
Design flow rate @ Δt 20ºC litres/sec 2.58 2.7 3.3 3.87 4.53 5.17 6.03 7.0
Water pressure loss @ Δt 20ºC mb 20 30 42 54 65 77 88 100
Water pressure max bar 6 6 6 6 6 6 6 6
Static head min m 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1
Flow rate min litres/sec 1.73 2.16 2.6 3.6 3.12 1.16 4.85 5.63
Input gas rate max m3 20.28 25.23 30.28 36.26 42.24 48.22 56.07 64.95
Working pressure boiler gas mb 20 20 20 20 20 20 20 20
Max gas inlet gas pressure mb 25 25 25 25 25 25 25 25
Burner pressure as Burner manufacturers data
Flue gas volume @ NTP m3 318 393 468 558 646 734 848 977
Flue gas temperature ºC 200 200 200 200 200 200 200 200
Draught required @ boiler flue outlet mb 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02
Pascal 2 2 2 2 2 2 2 2
Electric supply 230v 50Hz Yes Yes Yes Yes Yes Yes Yes Yes
Combustion chamber Length mm 880 1010 1140 1270 1400 1530 1660 1790
Ø mm 500 500 500 500 500 500 500 500
Combustion chamber volume litres 161.3 185.1 208.9 232.8 256.6 280.4 304.3 328.1
Dimensions Height mm 1193 1193 1193 1193 1193 1193 1193 1193
Width mm 850 850 850 850 850 850 850 850
Depth mm 1040 1170 1300 1430 1560 1690 1820 1950
Flue diameter mm 180 180 250 250 250 250 250 250
Fittings Water flow/return ND80 3 3 3 3 3 3 3 3
Drain cock inches 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4"
Gas inlet connection as Burner manufacturers data
Weight kg 940 1050 1170 1270 1400 1510 1630 1740
Clearance Front (min) mm 1000 1000 1000 1000 1000 1000 1000 1000
Rear (min) mm 800 800 800 800 800 800 800 800
Side (min) mm 200 200 200 200 200 200 200 200
Features and Benefits
The shape design of the heat exchanger ensures an optimum ratio between the combustion volumes and the heat exchange surfaces
The materials used ensure the long life of the boiler
New turbulators improve the heat exchange of the flue gas and at the same time ensures a lowerpressure drop
A baffle plate has been fitted at the central heating system return inlet to improve the circulation ofcold water towards the bottom of the boiler. This solution ensures more uniform distribution of theheat exchange fluid across the boiler’s heat exchange surface, achieving maximum heat exchange with less stress on the walls
The tube bundle has been positioned above the combustion chamber, so that the flue gas is alwaysdischarged into a “hot”environment, preventing condensation forming
The burner is not aligned with the combustion chamber, but rather has been moved downwards. This assists the reversal of the flame, reduces the pressure drop on the flue gas side and as aconsequence extends the operating range of the generator
The combustion chamber is completely cooled (even at the rear), to ensure a greater heat exchangesurface and improve the distribution of the heating load across the walls
The steel body is completely lined with an 80mm thick layer of glass wool, in turn covered by a sturdylayer of tearproof material
The door can be hinged on the right-hand or left-hand side, has a double door stop with a new-concept locking and centring system. The door lining in the “Quadra” is made from ceramic fibre
The PREXTHERM RSWQuadra series heatgenerators arepressurised combustionboilers with flamereversal in thecombustion chamberand three flue gas passes.
18 models available from 92 to 1890kW
22
Prextherm RSW QuadraPressurised steel boilers
23
Technical specifications
������������������
���������
�����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������
���������������������������������������������������������������������������������������������������������������������������������������������������������������������������
��������������������������������������������������������������������������������������������������������������������������������
������������������������������������������������������������������������������������������������������
�����������������������������������������������������������������������������������������������������������������������������������������������
�����������������������������������������������������������������������������������������������������������������������������������������������
������������������������������������������������������������������������������������������������������������������
���� �� �� �� ��
����
����
�
�������������������������������
���������������������������
����
����
�
����
����
�
�
����
������������
�������������
�������������������
������������������������������������������������������������������������������������
ktrnhjgbnfybt
�����������������������������������������������������������������
������������������������
�
����
����
����
�
��������������������
�������������������������������������������
��
��
�����������������������
���������������������������������������
��
������������������������
�����������������������������
����������������������������
���������������������������������������
����������������������������������������
������������������������������
�������������������������������������������
�������������������������������������������������������������Pfdjlcrjq yjvth�����������������
������������������������������������������������������������������������������������������� Ntgkjghjbpdjlbntkmyjcnm�������������������������
����������������� �������������������������������� ���������������������������� Gjktpyfz Ntgkjdfzvjoyjcnm
����������������������� ��������������������������������������������������� ���������������������������������� Vfrc= hf,jxtt lfdktybt
�������������������������� ����������������������������������������������������� ��������������������������������������������������� Vfrc= hf,jxfz ntvgthfnehf
���
��������������
������������������
���
��������������������������������������������������������������������������������������������������������������������������������������������������������
�������������������������������������������������������������������������������������������������Jghtccjdjxyjt l fdktybt#Lfnf
���������������������������������������������������
Vjltkm
Rjl
J,mtv rjnkjdjq djls
'
W
HT6
T3 - T1 - T2 T2 - T1 - T3
T5
T3 T1 T2
T4
L
T4
T5
KEY
T1 Central heating flow outlet
T2 Central heating return inlet
T3 Expansion vessel attachment
T4 Boiler drain
T5 Flue attachment
T6 Burner attachment fitting
92 107 152 190 240 300 350 399 525 600 720 820 940 1060 1250 1480 1600 1890
Heat output min. kW 60 70 100 137 160 196 228 260 341 390 468 533 611 689 813 962 1040 1229
max. kW 92 107 152 190 240 300 350 399 525 600 720 820 940 1060 1250 1480 1600 1890
Heat input min. kW 64.3 75 107.3 147.4 170.9 209.5 242.5 277.5 364.5 417 502 566 651 731 884 1046 1128 1336
max. kW 99.5 116 165 206 261 326 378 432 567 648 777 881 1011 1140 1359 1608 1736 2054
Water content dm3 120 120 185 185 235 300 360 365 405 465 735 735 850 1250 1250 1500 1500 1630
Energy marking (Directive 92/42 EEC) ��� ★★ ★★ ★★ ★★ ★★ ★★ ★★ ★★ ★★ ★★ ★★ ★★ ★★ ★★ ★★ ★★ ★★ ★★Efficiency at Pn max (Tm 70°C) % 92.48 92.00 92.30 91.95 92.25 92.05 92.51 92.30 92.50 92.56 92.71 93.10 92.95 93.05 92.00 92.03 92.15 92.01
Efficiency at Pn min (Tm 70°C) % 93.33 93.20 94.30 92.99 93.60 93.50 95.25 93.70 93.55 93.49 93.30 94.20 93.80 96.20 93.20 93.48 93.55 93.51
Efficiency at 30% Pn max (Tm 50°C) % 93.95 93.65 94.50 93.46 94.24 94.12 95.50 94.19 94.15 94.32 93.60 94.40 94.20 96.75 93.41 93.68 93.80 93.76
Δt smokes-environment � gas 150.9/105.9 161.5/118 161.6/119 167.1/115.7 162.5/109 167/115 159.9/97.9 161.5/113 159.4/115 157.9/108.9 157/120 148.2/100 153.8/105 151.6/96.7 179.6/121 176.3/108 173.6/107 176.7/107
CO2 gas 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
CO2 oil 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13
Specific Thermic load mW/m2h 34.3 36.8 32.3 40.4 41.3 42.2 41.1 44.3 47.7 46.1 42.3 48.2 47.0 39.2 46.2 44.8 48.4 51.0
Volumetric Thermic load mW/m2h 1.10 1.28 1.17 1.47 1.53 1.48 1.45 1.35 1.26 1.20 1.25 1.42 1.44 1.26 1.51 1.34 1.44 1.58
Shell loss* % 1.3 1.3 1.2 1.1 1.0 1.0 1.0 1.0 0.9 0.9 0.8 0.8 0.7 0.7 0.6 0.6 0.6 0.6
Loss at chimney burner on % 6.22 6.7 6.7 6.95 6.75 6.95 6.49 6.7 6.6 6.54 6.49 6.1 6.35 6.25 7.4 7.37 7.25 7.39
Loss at chimney burner off ** % 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1
Working pressure bar 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
Water side pressure drop Δt 10°C � Δp mbar 8 11 20 12 17 40 48 43 40 51 32 40 51 65 86 110 110 100
Δt 20°C � Δp mbar 2 2 5 3 4 9 13 16 12 16 10 18 16 20 25 32 32 29
Combustion chamber Internal Ø mm 390 390 420 420 420 488 488 538 638 638 686 686 686 776 776 830 830 830
Length mm 700 700 920 920 1170 1135 1385 1395 1385 1660 1670 1670 1854 2104 2250 2500 2500 2500
Volume m3 0.09 0.09 0.14 0.14 0.17 0.22 0.26 0.32 0.45 0.54 0.62 0.62 0.70 0.90 0.90 1.20 1.20 1.30
Surface total m2 2.9 2.9 4.7 4.7 5.8 7.1 8.5 9 11 13 17 17 20 27 27 33 33 37
Flue gas side pressure drop � Δp mbar 0.5 0.7 1.2 1.2 2.3 3.3 3.5 4.4 4.3 4.8 4.5 5.6 5.4 6 6.5 6.5 6.8 7
Flue gas flow-rate gas Kg/h 150 175 249 312 394 492 571 652 856 979 1179 1329 1523 1720 2050 2426 2620 3099
oil Kg/h 159 186 264 331 418 522 606 692 909 1039 1252 1411 1617 1825 2176 2576 2781 3290
Boiler weight (empty) kg 260 260 350 350 440 480 550 590 860 970 1250 1250 1420 1580 2250 2650 2700 2850
Dimensions Height mm 925 925 980 980 980 1100 1100 1100 1250 1250 1400 1400 1400 1580 1580 1730 1730 1730
Width mm 760 760 810 810 810 950 950 950 1060 1060 1260 1260 1450 1450 1530 1530 1530 1530
Length mm 1046 1046 1296 1296 1516 1546 1816 1817 1838 2098 2158 2158 2398 2420 2420 2722 2722 2722
Connections T1 DN 2" 2" 21/2" 21/2" 21/2" 21/2" 21/2" 21/2" 80 80 100 100 100 125 125 150 150 150
T2 DN 2" 2" 21/2" 21/2" 21/2" 21/2" 21/2" 21/2" 80 80 100 100 100 125 125 150 150 150
T3 DN 11/4" 11/4" 11/2" 11/2" 11/2" 11/2" 11/2" 11/2" 2" 2" 21/2" 21/2" 21/2" 3" 3" 100 100 100
T4 DN 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 11/2" 11/2" 11/2"
T5 Ø mm 200 200 220 220 220 220 220 220 250 250 350 350 350 400 400 450 450 450
* Air Blocked, temperature 20ºC** Combustion air closed
24
Features and Benefits
The shape design of the heat exchanger ensures an optimum ratio between the combustion volumes and the heat exchange surfaces
The materials used ensure the long life of the boiler
New turbulators improve the heat exchange of the flue gas and at the same time ensure a lowerpressure drop
A baffle plate has been fitted at the central heating system return inlet to improve the circulation ofcold water towards the bottom of the boiler. This solution ensures more uniform distribution of theheat exchange fluid across the boiler’s heat exchange surface, achieving maximum heat exchange with less stress on the walls
The tube bundle has been positioned above the combustion chamber, so that the flue gas is alwaysdischarged into a “hot”environment, preventing condensation forming
The burner is not aligned with the combustion chamber, but rather has been moved downwards. This assists the reversal of the flame, reduces the pressure drop on the flue gas side and as aconsequence extends the operating range of the generator
The combustion chamber is completely cooled (even at the rear), to ensure a greater heat exchangesurface and improve the distribution of the heating load across the walls
The steel body is completely lined with an 80mm thick layer of glass wool, in turn covered by a sturdylayer of tearproof material
The door can be hinged on the right-hand or left-hand side, has a double door stop with a new-concept locking and centring system. The door lining in the “Tonda” has a double cement lining plusan extra layer of insulating material
Prextherm RSW TondaPressurised steel boilers
The PREXTHERM RSWTonda series heatgeneratorsare pressurisedcombustion boilers with flame reversalin the combustionchamber and three flue gas passes.
7 models availablefrom 2360 to 6000kW
25
Technical specifications
������������������
���������
�����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������
���������������������������������������������������������������������������������������������������������������������������������������������������������������������������
��������������������������������������������������������������������������������������������������������������������������������
������������������������������������������������������������������������������������������������������
�����������������������������������������������������������������������������������������������������������������������������������������������
�����������������������������������������������������������������������������������������������������������������������������������������������
������������������������������������������������������������������������������������������������������������������
�� �� �� ���� ��
�
����
������������
�������������
�������������������
������������������������������������������������������������������������������������
ktrnhjgbnfybt
�����������������������������������������������������������������
������������������������
�
����
����
����
�
��������������������
�������������������������������������������
��
��
�����������������������
���������������������������������������
��
������������������������
�����������������������������
����������������������������
���������������������������������������
����������������������������������������
������������������������������
�������������������������������������������
�������������������������������������������������������������Pfdjlcrjq yjvth�����������������
������������������������������������������������������������������������������������������� Ntgkjghjbpdjlbntkmyjcnm�������������������������
����������������� �������������������������������� ���������������������������� Gjktpyfz Ntgkjdfzvjoyjcnm
����������������������� ��������������������������������������������������� ���������������������������������� Vfrc= hf,jxtt lfdktybt
�������������������������� ����������������������������������������������������� ��������������������������������������������������� Vfrc= hf,jxfz ntvgthfnehf
���
��������������
������������������
���
��������������������������������������������������������������������������������������������������������������������������������������������������������
�������������������������������������������������������������������������������������������������Jghtccjd jxyjt lfdktybt#Lfnf
���������������������������������������������������
Vjltkm
Rjl
J,mtv rjnkjdjq djls
'
����
����
�
�������������������������������
���������������������������
����
����
�
����
����
�
W
T1
H
T4
T6
T1 - T3 - T2
L
T3 T2 T2 - T3 - T1
T5T5
T4
KEY
T1 Central heating flow outlet
T2 Central heating return inlet
T3 Expansion vessel attachment
T4 Boiler drain
T5 Flue attachment
T6 Burner attachment fitting
2360 3000 3600 4000 4500 5000 6000
Heat output min. kW 1535 1950 2340 2600 2926 3251 3902
max. kW 2360 3000 3600 4000 4500 5000 6000
Heat input min. kW 1668 2113 2536 2819 3165 3515 4215
max. kW 2565 3250 3900 4334 4868 5407 6483
Water content dm3 2150 2600 2950 4500 4950 6250 7000
Energy marking (Directive 92/42 EEC) ��� ★★ ★★ ★★ ★★ ★★ ★★ ★★Efficiency at Pn max (Tm 70°C) % 92.00 92.30 92.31 92.30 92.45 92.47 92.55
Efficiency at Pn min (Tm 70°C) % 93.20 93.51 93.72 93.51 93.40 93.30 93.50
Efficiency at 30% Pn max (Tm 50°C) % 93.65 93.76 94.21 93.76 94.05 93.90 94.35
Δt smokes-environment � gas 179.1/120 172.5/113 172.3/114 174.7/113 171.4/105 171.4/106 169.2/109
CO2 gas 10 10 10 10 10 10 10
CO2 oil 13 13 13 13 13 13 13
Specific Thermic load mW/m2h 52.4 49.1 52.9 45.4 46.3 45.0 43.7
Volumetric Thermic load mW/m2h 1.22 1.16 1.21 1.14 1.18 1.12 1.20
Shell loss* % 0.5 0.5 0.5 0.4 0.4 0.4 0.4
Loss at chimney burner on % 7.4 7.2 7.19 7.3 7.15 7.13 7.05
Loss at chimney burner off ** % 0.1 0.1 0.1 0.1 0.1 0.1 0.1
Working pressure bar 6 6 6 6 6 6 6
Water side pressure drop Δt 10°C � Δp mbar 150 145 190 250 280 200 215
Δt 20°C � Δp mbar 42 45 61 70 80 55 65
Combustion chamber Internal Ø mm 980 1130 1130 1174 1174 1278 1278
Length mm 2750 3000 3300 3300 3300 3300 3300
Volume m3 2.10 2.80 3.20 3.80 4.10 4.80 5.40
Surface total m2 45 61 68 88 97 111 137
Flue gas side pressure drop � Δp mbar 7.2 7.5 8.2 9.5 10.5 10.8 12.0
Flue gas flow-rate gas Kg/h 3870 4904 5884 6539 7344 8158 9781
oil Kg/h 4108 5205 6246 6941 7795 8660 10383
Boiler weight (empty) kg 3900 5300 5800 7500 8000 9600 11500
Dimensions Height mm 1950 2140 2140 2325 2325 2525 2525
Width mm 1610 1800 1800 1980 1980 2180 2180
Length mm 3232 3446 3816 4086 4436 4458 4958
Connections T1 DN 150 200 200 200 200 250 250
T2 DN 150 200 200 200 200 250 250
T3 DN 100 125 125 125 125 150 150
T4 DN 11/2" 11/2" 11/2" 11/2" 11/2" 11/2" 11/2"
T5 Ø mm 450 500 500 600 600 650 650
* Air Blocked, temperature 20ºC** Combustion air closed
26
Features and Benefits
The shape design of the heat exchanger ensures an optimum ratio between the combustion volumes and the heat exchange surfaces
The materials used ensure the long life of the boiler
New turbulators improve the heat exchange of the flue gas and at the same time ensure a lowerpressure drop
A baffle plate has been fitted at the central heating system return inlet to improve the circulation ofcold water towards the bottom of the boiler. This solution ensures more uniform distribution of theheat exchange fluid across the boiler’s heat exchange surface, achieving maximum heat exchange with less stress on the walls
The tube bundle has been positioned above the combustion chamber, so that the flue gas is alwaysdischarged into a “hot”environment, preventing condensation forming
The burner is not aligned with the combustion chamber, but rather has been moved downwards. This assists the reversal of the flame, reduces the pressure drop on the flue gas side and as aconsequence extends the operating range of the generator
The combustion chamber is completely cooled (even at the rear), to ensure a greater heat exchangesurface and improve the distribution of the heating load across the walls
The steel body is completely lined with an 80mm thick layer of glass wool, in turn covered by a sturdylayer of tearproof material
The door can be hinged on the right-hand or left-hand side, has a double door stop with a new-concept locking and centring system. The door lining in the “Quadra” is made from ceramic fibre
The PREXTHERM RSHQuadra series heatgeneratorsare pressurisedcombustion boilers with flame reversalin the combustionchamber and three flue gas passes.
12 models available from 92 to 940kW
Prextherm RSH QuadraHigh efficiency pressurised steel boilers
27
Technical specifications
������������������
���������
�����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������
���������������������������������������������������������������������������������������������������������������������������������������������������������������������������
��������������������������������������������������������������������������������������������������������������������������������
������������������������������������������������������������������������������������������������������
�����������������������������������������������������������������������������������������������������������������������������������������������
�����������������������������������������������������������������������������������������������������������������������������������������������
������������������������������������������������������������������������������������������������������������������
���� �� �� �� ��
����
����
�
�������������������������������
���������������������������
����
����
�
����
����
�
�
����
������������
�������������
�������������������
������������������������������������������������������������������������������������
ktrnhjgbnfybt
�����������������������������������������������������������������
������������������������
�
����
����
����
�
��������������������
�������������������������������������������
��
��
�����������������������
���������������������������������������
��
������������������������
�����������������������������
����������������������������
���������������������������������������
����������������������������������������
������������������������������
�������������������������������������������
�������������������������������������������������������������Pfdjlcrjq yjvth�����������������
������������������������������������������������������������������������������������������� Ntgkjghjbpdjlbntkmyjcnm�������������������������
����������������� �������������������������������� ���������������������������� Gjktpyfz Ntgkjdfzvjoyjcnm
����������������������� ��������������������������������������������������� ���������������������������������� Vfrc= hf,jxtt lfdktybt
�������������������������� ����������������������������������������������������� ��������������������������������������������������� Vfrc= hf,jxfz ntvgthfnehf
���
��������������
������������������
���
��������������������������������������������������������������������������������������������������������������������������������������������������������
�������������������������������������������������������������������������������������������������Jghtccjdjxyjt l fdktybt#Lfnf
���������������������������������������������������
Vjltkm
Rjl
J,mtv rjnkjdjq djls
'
W
HT6
T3 - T1 - T2 T2 - T1 - T3
T5
T3 T1 T2
T4
L
T4
T5
KEY
T1 Central heating flow outlet
T2 Central heating return inlet
T3 Expansion vessel attachment
T4 Boiler drain
T5 Flue attachment
T6 Burner attachment
80 90 130 160 200 250 350 450 500 600 700 800
Heat output min. kW 60 70 100 137 160 196 260 341 390 468 533 611
max. kW 92 107 152 190 240 320 399 500 600 720 820 940
Heat input min. kW 63.7 74.3 105.8 144.4 168.4 206 272.6 357 407.9 489.8 558.4 638.9
max. kW 97.7 113.5 160.8 200.2 252.6 336.4 418.4 523.5 627.6 753.6 859.1 982.9
Water content dm3 120 185 235 304 362 337 405 471 735 850 850 1240
Energy marking (Directive 92/42 EEC) ��� ★★★ ★★★ ★★★ ★★★ ★★★ ★★★ ★★★ ★★★ ★★★ ★★★ ★★★ ★★★Efficiency at Pn max (Tm 70°C) % 94.19 94.27 94.52 94.92 95.02 95.15 95.37 95.52 95.62 95.56 95.47 96.00
Efficiency at Pn min (Tm 70°C) % 95.40 95.50 95.75 95.44 95.71 95.84 96.06 96.21 96.31 96.25 96.16 96.34
Efficiency at 30% Pn max (Tm 50°C) % 95.42 95.52 95.77 95.75 96.02 96.12 96.37 96.52 96.62 96.56 96.47 96.65
Δt smokes-environment � gas 112.9/85.6 111.1/83.4 107.8/80.1 101.1/82.7 101.1/79 98.2/76.8 95.5/73.6 92.2/70.3 92.2/70.3 93.5/78.4 97.8/75.8 93.8/71.9
CO2 gas 10 10 10 10 10 10 10 10 10 10 10 10
CO2 oil 13 13 13 13 13 13 13 13 13 13 13 13
Specific Thermic load mW/m2h 31.7 22.7 26.2 26.3 28.2 35.5 36.2 38.4 35.2 36.0 41.0 34.8
Volumetric Thermic load mW/m2h 1.08 0.81 0.94 0.91 0.97 1.05 0.92 0.96 1.01 1.07 1.22 1.09
Shell loss* % 1.3 1.3 1.2 1.1 1.0 1.0 0.9 0.9 0.8 0.8 0.7 0.7
Loss at chimney burner on % 4.51 4.43 4.28 3.98 3.98 3.85 3.73 3.58 3.58 3.6 3.83 3.65
Loss at chimney burner off ** % 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1
Working pressure bar 6 6 6 6 6 6 6 6 6 6 6 6
Water side pressure drop Δt 10°C � Δp mbar 11 20 12 17 40 48 40 51 32 40 51 65
Δt 20°C � Δp mbar 2 5 3 4 9 13 12 16 10 18 16 20
Combustion chamber Internal Ø mm 390 420 420 420 420 488 638 638 686 686 686 776
Length mm 700 920 920 1170 1170 1135 1385 1660 1670 1670 1854 2104
Volume m3 0.09 0.14 0.17 0.22 0.26 0.32 0.45 0.54 0.62 0.70 0.70 0.90
Surface total m2 2.9 4.7 5.8 7.2 8.5 9 11 13 17 20 20 27
Flue gas side pressure drop � Δp mbar 0.7 1.2 1.2 2.3 3.3 3.5 4.3 4.8 4.5 5.6 5.4 6
Flue gas flow-rate gas Kg/h 156 182 258 321 405 539 670 838 1005 1207 1376 1574
oil Kg/h 161 186 264 329 415 553 687 860 1031 1238 1411 1615
Boiler weight (empty) kg 260 350 350 440 480 550 860 970 1250 1250 1420 1580
Dimensions Height mm 925 980 980 1100 1100 1100 1250 1250 1400 1400 1400 1580
Width mm 760 810 810 950 950 950 1060 1060 1260 1450 1450 1450
Length mm 1046 1296 1516 1546 1816 1817 1838 2098 2158 2398 2398 2420
Connections T1 DN 2" 21/2" 21/2" 21/2" 21/2" 21/2" 80 80 100 100 100 125
T2 DN 2" 21/2" 21/2" 21/2" 21/2" 21/2" 80 80 100 100 100 125
T3 DN 11/4" 11/2" 11/2" 11/2" 11/2" 11/2" 2" 2" 21/2" 21/2" 21/2" 3"
T4 DN 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4"
T5 Ø mm 200 220 220 220 220 220 250 250 350 350 350 400
* Air Blocked, temperature 20ºC** Combustion air closed
28
Features and Benefits
The shape design of the heat exchanger ensures an optimum ratio between the combustion volumes and the heat exchange surfaces
The materials used ensure the long life of the boiler
New turbulators improve the heat exchange of the flue gas and at the same time ensure a lowerpressure drop
A baffle plate has been fitted at the central heating system return inlet to improve the circulation ofcold water towards the bottom of the boiler. This solution ensures more uniform distribution of theheat exchange fluid across the boiler’s heat exchange surface, achieving maximum heat exchange withless stress on the walls
The tube bundle has been positioned above the combustion chamber, so that the flue gas is alwaysdischarged into a “hot”environment, preventing condensation forming
The burner is not aligned with the combustion chamber, but rather has been moved downwards. Thisassists the reversal of the flame, reduces the pressure drop on the flue gas side and as a consequenceextends the operating range of the generator
The combustion chamber is completely cooled (even at the rear), to ensure a greater heat exchangesurface and improve the distribution of the heating load across the walls
The steel body is completely lined with an 80mm thick layer of glass wool, in turn covered by a sturdylayer of tearproof material
The door can be hinged on the right-hand or left-hand side, has a double door stop with a new-concept locking and centring system. The door lining in the “Tonda” has a double cement lining plusan extra layer of insulating material
The PREXTHERM RSHTonda series heatgeneratorsare pressurisedcombustion boilers with flame reversalin the combustionchamber and three flue gas passes.
6 models availablefrom 1060 to 3000kW
Prextherm RSH TondaHigh efficiency pressurised steel boilers
29
Technical specifications
������������������
���������
�����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������
���������������������������������������������������������������������������������������������������������������������������������������������������������������������������
��������������������������������������������������������������������������������������������������������������������������������
������������������������������������������������������������������������������������������������������
�����������������������������������������������������������������������������������������������������������������������������������������������
�����������������������������������������������������������������������������������������������������������������������������������������������
������������������������������������������������������������������������������������������������������������������
�� �� �� ���� ��
�
����
������������
�������������
�������������������
������������������������������������������������������������������������������������
ktrnhjgbnfybt
�����������������������������������������������������������������
������������������������
�
����
����
����
�
��������������������
�������������������������������������������
��
��
�����������������������
���������������������������������������
��
������������������������
�����������������������������
����������������������������
���������������������������������������
����������������������������������������
������������������������������
�������������������������������������������
�������������������������������������������������������������Pfdjlcrjq yjvth�����������������
������������������������������������������������������������������������������������������� Ntgkjghjbpdjlbntkmyjcnm�������������������������
����������������� �������������������������������� ���������������������������� Gjktpyfz Ntgkjdfzvjoyjcnm
����������������������� ��������������������������������������������������� ���������������������������������� Vfrc= hf,jxtt lfdktybt
�������������������������� ����������������������������������������������������� ��������������������������������������������������� Vfrc= hf,jxfz ntvgthfnehf
���
��������������
������������������
���
��������������������������������������������������������������������������������������������������������������������������������������������������������
�������������������������������������������������������������������������������������������������Jghtccjd jxyjt lfdktybt#Lfnf
���������������������������������������������������
Vjltkm
Rjl
J,mtv rjnkjdjq djls
'
����
����
�
�������������������������������
���������������������������
����
����
�
����
����
�
W
T1
H
T4
T6
T1 - T3 - T2
L
T3 T2 T2 - T3 - T1
T5T5
T4
KEY
T1 Central heating flow outlet
T2 Central heating return inlet
T3 Expansion vessel attachment
T4 Boiler drain
T5 Flue attachment
T6 Burner attachment
900 1100 1300 1600 2000 2600
Heat output min. kW 689 813 962 1229 1535 1950
max. kW 1060 1250 1480 1845 2360 3000
Heat input min. kW 719.9 848.2 1004.4 1291.2 1603.1 2033.7
max. kW 1107.6 1304.2 1545.2 1930 2464.7 3128.8
Water content dm3 1490 1490 1620 1925 2600 2920
Energy marking (Directive 92/42 EEC) ��� ★★★ ★★★ ★★★ ★★★ ★★★ ★★★Efficiency at Pn max (Tm 70°C) % 95.72 95.86 95.8 95.60 95.77 95.90
Efficiency at Pn min (Tm 70°C) % 96.41 96.55 96.46 95.80 96.39 96.59
Efficiency at 30% Pn max (Tm 50°C) % 96.72 96.87 96.81 96.50 96.78 96.91
Δt smokes-environment � gas 94.4/72.5 91.3/69.3 92.7/70.6 97.1/77.3 95.5/73.4 92.7/70.6
CO2 gas 10 10 10 10 10 10
CO2 oil 13 13 13 13 13 13
Specific Thermic load mW/m2h 32.1 37.8 40.0 41.0 38.6 44.1
Volumetric Thermic load mW/m2h 0.93 1.08 1.18 0.92 0.88 0.97
Shell loss* % 0.6 0.6 0.6 0.6 0.5 0.5
Loss at chimney burner on % 3.68 3.54 3.60 3.80 3.73 3.60
Loss at chimney burner off ** % 0.1 0.1 0.1 0.1 0.1 0.1
Working pressure bar 6 6 6 6 6 6
Water side pressure drop Δt 10°C � Δp mbar 86 110 100 150 145 190
Δt 20°C � Δp mbar 25 32 29 42 45 61
Combustion chamber Internal Ø mm 776 830 830 980 1130 1130
Length mm 2250 2500 2500 2750 3000 3300
Volume m3 1.20 1.20 1.30 2.10 2.80 3.20
Surface total m2 33 33 37 45 61 68
Flue gas side pressure drop � Δp mbar 6.5 6.5 6.8 7 7.2 7.5
Flue gas flow-rate gas Kg/h 1774 2088 2474 3091 3947 5010
oil Kg/h 1819 2142 2538 3171 4049 5140
Boiler weight (empty) kg 2250 2650 2850 3900 5300 5800
Dimensions Height mm 1730 1730 1730 1950 2140 2140
Width mm 1530 1530 1530 1610 1800 1800
Length mm 2722 2722 2722 3232 3446 3816
Connections T1 DN 150 150 150 150 200 200
T2 DN 150 150 150 150 200 200
T3 DN 100 100 100 100 125 125
T4 DN 11/2" 11/2" 11/2" 11/2" 11/2" 11/2"
T5 Ø mm 450 450 450 450 500 500
* Air Blocked, temperature 20ºC** Combustion air closed
Vapoprex LVPSteam output from 150 to 3000kg/hLow pressure steam boiler with three flue passes, two in furnace.
Vapoprex HVPSteam output from 150 to 5000kg/h Medium pressure steam boiler with three flue passes, two in furnace.
Vapoprex 3GFSteam output from 1700 to 8500kg/hMedium pressure steam boiler with three flue passes.
Vapoprex 3GNSteam output from 2000 to 28000kg/hMedium pressure steam boiler with three flue passes.
30
Steam Generators
Industrial Heating
Ferroli Industrial Heating offers a range ofboilers for markets worldwide, with outputsvarying between 100 and 19500kW:
• generators for the production of hotwater, superheated water and steam(with flame reversal and 3 flue passes)
• solid fuel generators for the production of hot water, superheated water andsaturated steam
31
Hot water boilers
Superheated water boilers
Prextherm T 3GHeat output from 1200 to 19500kWHot water boiler with three flue passes, two in furnace.
Prextherm T 3G ASLHeat output from 1200 to 6000kWSuperheated water boiler max temperature 140°, with three flue passes.
Prextherm ASH/ASLHeat output from 160 to 3500kWSuperheated water boiler with three flue passes, two in furnace.
Prextherm 3GF1400 to 3000kWSuperheated water boiler with three flue passes.
Prextherm 3GN ASHeat output from 1400 to 19500kWSuperheated water boiler with three flue passes.
Hot Water Prextherm RSW/RSHHeat output from 92 to 3600kWHot water boiler with three flue passes, two in furnace.
Aquacyl twin coil cylinder is idealfor solar water heating. The lower coil can be heated byenergy from the solar collector. If hot water is required at a highertemperature than can be achievedby solar energy alone, then a FerroliHigh Efficiency boiler fires and heatsthe upper coil to boost the watertemperature. Alternatively thecylinder’s electric immersionheater(s) may be used to boostthe hot water temperature.
32
Aquacyl Twin CoilHigh quality stainless steel hot water cylinder
for use on unvented hot water systems
Features and Benefits
Twin coil for fastest heat recovery
No anode
Easy to install
Easy to commission
Simple electrical installation
Stylish appearance
Long life stainless steel body
Low density, low HCFC insulation ensures optimum efficiency
Easy to adjust immersion heaters
No internal expansion bubble to maintain
All pipe and electrical connections are possible from cylinder ‘front’
25 year guarantee plus nationwide cover from our own service engineers
Special features
Two 3kW immersion heaters fitted as standard (optional 6, 9 and 12kW heaters available)
6kW titanium heaters available for hard water areas or for customers with bore holes
33
Ferroli’s Aquacyl cylinder range iseasy to install and commission.Each model is supplied completewith all necessary temperature andpressure expansion valves and vessels.
The Aquacyl cylinder vessel has a 25 yearmanufacturer’s guarantee as standard.
Technical specifications875170 875200 875250 875300 875510 875000
Storage capacity litres 170 200 250 300 500 1000
Overall diameter mm 510 554 554 554 660 820
Overall height mm 1200 1120 1330 1650 1835 2314
Overall height with expansion vessel on top mm 1480 1400 1330 2110 FM FM
Weight when full kg 220 250 310 360 556 1185
Primary flow/return connections 3/4" 3/4" 3/4" 3/4" 1" 1"
Cold feed/hot draw off connections 3/4" 3/4" 3/4" 3/4" 1" 1"
Maximum water supply pressure bar 12 12 12 12 12 12
System operating pressure bar 3 3 3 3 3 3
Expansion vessel charge pressure bar 3 3 3 3 3 3
Expansion relief valve set pressure bar 6 6 6 6 6 6
Temp and pressure relief valve set pressure bar 7 7 7 7 7 7
Temp and pressure relief valve lift temperature ºC 90 90 90 90 90 90
Maximum primary work pressure bar 3 3 3 3 3 3
Recommended maintenance Annual Annual Annual Annual Annual Annual
Immersion heater 3kW 230/240V L= 355mm 1 1 1 1 1 1
FM = Floor Mounted
Features and Benefits
Remote thermostat
Wired or wireless remote control unit
Humidity control sensors for cooling mode
Built-in microprocessor control unit to manage the heating / cooling circuit
Expansion modules for management of multiple zones
Integrated management of multiple units in cascade (max. 16)
Legionella protection function
Digital management of special tariff time bands
Timer/programmer for timed domestic hot water production (with external storage cylinder)
Built-in compressor oil frost protection system
Outdoor probe for climate control supplied as standard
Built-in room humidity control with humidity sensor (optional) for cooling in summer
Control of solar heating system integration
Operating hour counter for the compressor and the pumps
Integrated management (with three heat output levels) of the supplementary electric heater (optional)
The HXA series heatpumps – suitable for familyhouses or small apartmentbuildings. Heat pumps donot require gas connectionsor the installation of flues.Ideal for new build as wellas being a cost effectiveretrofit solution in houseswhich currently rely uponliquid fuel systems (oil,LPG). The units can also beintegrated with a solarheating system.
Air Source Heat Pumps HXARenewable energy
34
The advanced microprocessor control unit can control theheating/cooling system, the domestic hot water storage cylinder and a solar heating system.
35
Technical specifications
KEY1 Heating circuit return
2 Heating circuit return for use with integral standard orhigh head pump options
3 Heating flow
4 Heating flow with “Supplementary electric heater” option
Unit 1 2 3
Model 7.1 8.1 10.1 12.1 15.1 18.1
Power supply V-ph-Hz 230-1-50 230-1-50 230-1-50 230-1-50 – –
F.L.A. Maximum total input current A 13.4 17.1 22.0 24.8 – –
F.L.I. Maximum total power input kW 2.9 3.7 4.7 5.3 – –
Maximum total peak current A 82 112 141 174 – –
M.I.C. Maximum total peak current
with soft starter (option) A 41 43 49 59 – –
Power supply V-ph-Hz – – 400-3N-50 400-3N-50 400-3N-50 400-3N-50
F.L.A. Maximum total input current A – – 8.1 9.0 11.1 13.9
F.L.I. Maximum total power input kW – – 4.7 5.3 6.2 8.0
Maximum total peak current A – – 54 69 87 106
M.I.C. Maximum total peak current
with soft starter (option) A – – 33 40 48 55
Supplemental electric heaters (option)
Power supply V-ph-Hz 230-1-50 230-1-50 230-1-50 230-1-50 – –
– – 400-3N-50 400-3N-50 400-3N-50 400-3N-50
F.L.A. Maximum total input current (230V-1N-50Hz) A 28.7 28.7 28.7 28.7 – –
F.L.A. Maximum total input current (400V-3N-50Hz) A – – 9.5 9.5 9.5 9.5
F.L.I. Maximum total power input kW 6.6 6.6 6.6 6.6 6.6 6.6
Operational weight
Unit without options kg 89 96 108 126 143 152
Options
Control of the flow-rate of the heating circuit
Standard pump kg 7 7 7 7 14 14
High pressure pump kg 9 9 14 14 15 15
Supplementary electric heaters kg 5 5 5 5 5 5
Noise
Sound pressure level at 1 metre db(A) 55 55 57 57 59 59
D60
E
F
962G
52
L
356
97
56 994
H
102 710394 179
1
3
2
4
1
3
2
4
Unit 1 2 3Connections male 1" 1" 1"
D mm 509 759 1059
E mm 535 646 946
F mm 177 427 727
G mm 569 819 1119
L mm 155 155 97
H mm 903 1153 1453
Features and Benefits
Three-speed heating circuit pump on the unit
Multistage high pressure heating circuit pump on the unit
Multistage high efficiency heating circuit pump on the unit
Snow protection cover (for outdoor installation)
Three-stage supplementary electric heaters
Remote thermostat
Wired or wireless remote control unit
Humidity control sensors in cooling mode
Three-way valve for the management of domestic hot water on the unit
Single-phase power supply (in versions up to 13kW)
Built-in microprocessor control unit to manage the heating/cooling system
Expansion modules for management of multiple zones
Integrated management of multiple units in cascade (max.16)
Legionella protection function
Digital input for management of special tariff time bands
Timer/programmer for timed domestic hot water production (with external storage cylinder)
Outdoor probe for climate control supplied as standard
Built-in room humidity control with humidity sensor (optional) for cooling in summer
Control of solar heating system integration
Operating hour counter for the compressor and pumps
Integrated management (with three heat output levels) of the supplementary electric heater (optional)
Ductable for indoor installation
Suitable for family housesor small apartmentbuildings. Heat pumps do not require gasconnections or theinstallation of flues. Idealfor newbuild as well asbeing a cost effectiveretrofit solution in houseswhich currently rely uponliquid fuel systems (oil,LPG). The units can alsobe integrated with a solarheating system.
Air Source Heat Pumps HXPReverse cycle (active reverse cycle) for OUTDOOR or INDOOR installation
36
37
Technical specifications
KEY1 Heating circuit return
2 Heating circuit flow
3 Domestic hot water outlet
Unit 1 2 3Model 11.1 13.1 16.1 18.1 21.1 24.1 27.1 31.1 35.1Power supply V-ph-Hz 230-1-50 230-1-50 – – – – – – –
F.L.A. Maximum total input current A 22.5 25.3 – – – – – – –
F.L.I. Maximum total power input kW 4.8 5.4 – – – – – – –
Maximum total peak current A 142 175 – – – – – – –
M.I.C. Maximum total peak current
with soft starter (option) A 50 60 – – – – – – –
Power supply V-ph-Hz 400-3N-50 400-3N-50 400-3N-50 400-3N-50 400-3N-50 400-3N-50 400-3N-50 400-3N-50 400-3N-50
F.L.A. Maximum total input current A 8.6 9.5 10.6 11.5 12.8 17.1 22.1 23.1 26.1
F.L.I. Maximum total power input kW 4.8 5.4 6.1 7.4 8.2 11.0 14.3 14.9 16.9
Maximum total peak current A 55 70 87 96 105 125 146 155 162
M.I.C. Maximum total peak current
with soft starter (option) A 34 41 48 51 54 63 68 72 74
Supplemental electric heaters (option)Power supply V-ph-Hz 230-1-50 230-1-50 230-1-50 230-1-50 230-1-50 230-1-50 230-1-50 230-1-50 230-1-50
V-ph-Hz 400-3N-50 400-3N-50 400-3N-50 400-3N-50 400-3N-50 400-3N-50 400-3N-50 400-3N-50 400-3N-50
F.L.A. Maximum total input current (230V-1N-50Hz) A 39.1 39.1 39.1 39.1 39.1 39.1 78.3 78.3 78.3
F.L.A. Maximum total input current (400V-3N-50Hz) A 13.0 13.0 13.0 13.0 13.0 13.0 26.0 26.0 26.0
F.L.I. Maximum total power input kW 9.0 9.0 9.0 9.0 9.0 9.0 18.0 18.0 18.0
System pump – standard (option)Power supply V-ph-Hz 230-1-50 230-1-50 230-1-50 230-1-50 230-1-50 230-1-50 230-1-50 230-1-50 230-1-50
F.L.A. Maximum total input current A 0.8 0.8 0.8 1.1 1.1 1.1 2.1 2.1 2.1
F.L.I. Maximum total power input kW 0.15 0.15 0.15 0.21 0.21 0.21 0.41 0.41 0.41
System pump – high pressure (option)Power supply V-ph-Hz 230-1-50 230-1-50 230-1-50 230-1-50 230-1-50 230-1-50 230-1-50 230-1-50 230-1-50
F.L.A. Maximum total input current A 1.1 1.1 1.1 2.1 2.1 2.1 2.3 2.3 2.3
F.L.I. Maximum total power input kW 0.21 0.21 0.21 0.41 0.41 0.41 0.45 0.45 0.45
System pump – high efficiency (option)Power supply V-ph-Hz 230-1-50 230-1-50 230-1-50 230-1-50 230-1-50 230-1-50 230-1-50 230-1-50 230-1-50
F.L.A. Maximum total input current A 0.7 0.7 0.7 0.7 0.7 0.7 1.6 1.6 1.6
F.L.I. Maximum total power input kW 0.14 0.14 0.14 0.14 0.14 0.14 0.31 0.31 0.31
Operational WeightUnit without options kg 209 221 223 279 283 301 355 357 360
Options
Heating circuit flow-rate control Standard pump kg 5 5 5 6 6 6 7 7 7
High pressure pump kg 6 6 6 7 7 7 7 7 7
High efficiency pump kg 5 5 5 5 5 5 7 7 7
Domestic hot water production
Three-way valve kg 7 7 7 9 9 9 9 9 9
Supplementary electric heaters kg 7 7 7 7 7 7 14 14 14
Accessories – Protection cover kg 24 24 24 31 31 31 38 38 38
NoiseSound pressure level without protection cover db(A) 56 56 57 59 59 60 60 61 61
at 1 metre with protection cover db(A) 53 53 54 55 55 56 56 57 57
B1
B2
A
H
1
32
1
32
Unit 1 2 3Connections male 1" 11/4" 11/4"
A mm 730 880 1180
B1 mm 730 880 880
B2 mm 1630 1810 1810
H mm 1470 1620 1620
Features and Benefits
Quick and easy installation
Available in two sizes, the space saving all-in-one configuration makes the Aquasol XS
convenient to site
Pre-plumbed pipework saves on materials, reduces install time – saves costs for the home-owner
Specifically developed, easy-to-use controls for simple set-up and system monitoring
Additional heating coil and electric immersion element are included for supplementary heating of the
stored hot water for legionella protection
Revolutionary in-roof solar collectors, available in portrait or landscape, for both tile and slate roofs
Built in Solar Fluid ‘Drain-Back’ system prevents the solar collector freezing or overheating
No requirement for glycol based solar fluid. Simply fill with mains water
Connect the heating coil to a Ferroli Optimax HE Plus System or OV condensing boiler for a complete
household energy efficient heating solution
All components are easy to access for commissioning and servicing
Designed and manufactured to the highest specification
10 year warranty on the Aquasol XS Cylinder
By having the pumping
station and solar controller
all factory fitted into one
unit, the Aquasol XS storage
unit takes significantly less
time and cost to install.
Connecting the electric
wiring, solar coil, back up
heating and hot water
circuits is made simple.
Solar – Aquasol XSDrain Back Solar Systems
38
39
Solar storage – lower part of tank litres 100
Back-up storage – upper part of tank litres 85
Back-up heat exchanger m2/kW 0.75/25
Electrical element kW 3kW
Dimensions (HxWxD) mm 1275 x 598 x 590
Weight empty kg 67
Recommended collector type Thermic 42
12mm flow. 15mm return. Col Loop Max L=m* m 27
15mm flow. 15mm return. Col Loop Max L=m* m 22
Solar storage = lower part of tank litres 150
Back-up storage = upper part of tank litres 130
Back-up heat exchanger m2/kW 0.90/30
Electrical element kW 3
Dimensions (HxWxD) mm 1785 x 598 x 590
Weight empty kg 84
Recommended collector type 2 x Thermic 28
12mm flow. 15mm return. Col Loop Max L=m* m 22
15mm flow. 15mm return. Col Loop Max L=m* m 18
* Maximum pipe (10x8mm/15x13mm) length collector circuit (L=flow + return) without the need to install an additional Drain-Back tank.
Product code 12021 12031 12035
Model name 28S 42L 42P
Height mm 1776 1776 2596
Width mm 1751 2596 1776
Depth mm 105 105 105
Weight kg 60 84 84
Gross panel area m2 3.11 4.61 4.61
Nett panel area m2 2.75 4.12 4.12
Zero loss collector efficiency 0.743 0.743 0.743
Heat loss coefficient A1 W/m2K 3.194 3.194 3.194
Aquasol XS 300T – ZU40030000Includes installation kit: (Monobloc Pressure Reducing Valve (PRV), Expansion Vessel,Tundish, Y Strainer, Brackets and Flex (where applicable))
Aquasol XS 200T – 24022FEIncludes installation kit: (Monobloc Pressure Reducing Valve (PRV), Expansion Vessel,Tundish, Y Strainer, Brackets and Flex (where applicable))
Technical specifications
Solar Panel (in-roof)
Features and Benefits
Individual system components for the ultimate flexibility of siting
Three solar collector panel sizes to choose from and suitable for tile or slate roofs
Five different sized twin coil cylinders and 4 sizes drain back vessel options for exact specification to
the property needs
Solar panels can be mounted to either sloping or flat roofs
Extensive warranties on all components (Collectors – 10 years, Cylinder Vessel – 25 years)
Solar – AquacylDrain Back Solar Systems
40
Each system component isspecified and supplied forindividual siting andinstallation. Providingflexibility as the fundamentalbenefit of the Aquacyl system.The range of size options foreach major part means thatany property can be cateredfor. Furthermore, the ability to position them individuallyeradicates potentialrestrictions caused by internallayout or space constraints.
41
Pumping Station
Product code ZU40021001
The pumping station has a 6m pump head and comes complete with:
• Built in controller for
- system monitoring display
- flow gauge
- up to 3 temperature sensors
- pump speed control
- system function control
• Pressure gauges
• Pressure relief valve
• Connections for filling and emptying
The essential heart of the Aquacyl solar solution.
Product code 12021 12031 12035
Model name 28S 42L 42P
Height mm 1776 1776 2596
Width mm 1751 2596 1776
Depth mm 105 105 105
Weight kg 60 84 84
Gross panel area m2 3.11 4.61 4.61
Nett panel area m2 2.75 4.12 4.12
Zero loss collector efficiency 0.743 0.743 0.743
Heat loss coefficient A1 W/m2K 3.194 3.194 3.194
Product code 20131 20033 20136 20140
Capacity litres 10 20 30 50
External (HxWxD) mm 260 x 310 x 260 400 x 365 x 355 400 x 520 x 355 400 x 830 x 355
Material Mild steel Mild steel Mild steel Mild steel
Pressure tested bar 4.5 4.5 4.5 4.5
Max peak temp °C 200 200 200 200
Max collector array m2 6 12.5 21 33
Technical specifications
Aquacyl Twin Coil Cylinders See page 33 for full range specifications
Solar Panel
Drain-back Units
Features and Benefits
Individual system components for the ultimate flexibility of siting
Two portrait solar collector panel sizes to choose from both are suitable for
tile or slate roofs with ‘on-roof’ fixing
Five different sized twin coil cylinders for exact specification to the property needs
Solar panels can be mounted on either sloping or flat roofs
Easy installation with ‘click clamps’ and double O-ring joints
Absorber of pure copper (12 tubes) with titanium oxide coating
Pre mixed solar fluid
Solar Keymark certification
High SAP ratings
Extensive warranties on all components (Collectors – 10 years, Cylinder Vessel – 25 years)
A bespoke solution for theultimate flexibility – Ferroli’sEcotop pressurised solar heatingsystem can be tailored to meetall your hot water needs. TheEcotop installation is filled with a solar fluid thatremains within the solarpanel and pressurised sealed system. Each systemcomponent is specified and supplied for individualsiting and installation.
Solar – EcotopPressurised solar heating for any home
42
43
Technical specifications
Twin Line Pumping Station
Product code ZU40022001
The twin line pumping station has a 6m pump head and comes complete with:• Built in controller for- system monitoring display- flow gauge- up to 3 temperature sensors- pump speed control- system function control
• Pressure gauges
• Pressure relief valve
• Connections for filling and emptying
The essential heart of the Aquacyl solar solution.
Product code 0XCK1RXA 0XCK2RXA
Model name Ecotop VF 2.0 Ecotop VF 2.3
Height mm 1700 2000
Width mm 1160 1160
Depth mm 80 80
Weight kg 35 43
Gross panel area m2 1.97 2.32
Nett panel area m2 1.87 2.21
Zero loss collector efficiency 0.755 0.755
Heat loss coefficient A1 W/m2K 3.720 3.720
The Ecotop basic solar kit consists of:Solar Collector(s) – depending on quantity required.
Support Frame Box Kit(s) – used to support the solar panel on either sloping or flat roofs.
Hydraulic Kit – used to make the hydraulic connections to the solar panel.
Pump Station complete with solar controller.
Solar Expansion Vessel – accommodates the expansion of the solar system fluid.
Solar Expansion Vessel connection kit – to connect and support the expansion vessel.
Interconnection kit – hydraulic connection for more than one panel installation.
Aquacyl Twin Coil Cylinders See page 33 for full range specifications
Solar Panel
Commercial/V1/01.11
Whilst every effort is taken to ensure the accuracy of the information contained within thebrochure, the details are offered in good faith and Ferroli Ltd. accepts no liability for mattersarising as a result of errors and/or omissions.
The information in this brochure was correct at the time of printing, however specificationsand designs may be changed owing to Ferroli’s policy of continuous product research anddevelopment. The technical specifications in the product instruction manual supersedesand should always be referred to during installation and maintenance.
Reproduction of this publication, or any part, is not permitted without the written consent ofFerroli Ltd. Please contact our Marketing Communications via [email protected] forfurther information. The statutory rights of the consumer are not affected.
Ferroli LimitedLichfield Road, Branston Industrial EstateBurton on Trent, Staffordshire, DE14 3HD
Commercial t: 08715 592923 e: [email protected] t: 08715 592920 e: [email protected] t: 08715 592924 e: [email protected] t: 08715 592927 e: [email protected] t: 08715 592932 e: [email protected]
www.ferroli.co.uk
Calls to these numbers are charged at 8 pence per minute from BT landlines. Calls from mobile networks may be considerably more.
Des
igne
d an
d prod
uced
by GS2
Des
ign/
JDA
Your local Ferroli stockist