Upload File

common terms (and what they mean) s or slip: a regular hub. the pipe glues into this (same o.d. as...

  • Home
  • Documents
  • Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of
58
Common Terms (and what they mean) • S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) • Mips: Male pipe threads on the outside of fitting • Fips: Female pipe threads on the inside of fitting • Spigot or SP: The same size as the pipe. Will glue into another fitting • Hyset: Has a nailing flange on the front of the fitting • Dropear: Has a nailing flange on the back of the fitting • Nominal: Used to describe copper pipe and fittings in plumbing. Refers to the inside diameter of the pipe which varies by thickness of the pipe. The outside is a constant size and is always 1/8" larger than the nominal size. Example: 1/2" nominal is always 5/8" O.D.

Upload: leslie-mosley

Post on 23-Dec-2015

215 views

Category:

Documents


0 download

Report

Tags:

TRANSCRIPT

Page 1: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Common Terms(and what they mean)

• S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling)

• Mips: Male pipe threads on the outside of fitting • Fips: Female pipe threads on the inside of fitting • Spigot or SP: The same size as the pipe. Will glue into

another fitting • Hyset: Has a nailing flange on the front of the fitting • Dropear: Has a nailing flange on the back of the fitting • Nominal: Used to describe copper pipe and fittings in

plumbing. Refers to the inside diameter of the pipe which varies by thickness of the pipe. The outside is a constant size and is always 1/8" larger than the nominal size. Example: 1/2" nominal is always 5/8" O.D.

Page 2: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Definition of pipe thread acronyms

• NPTNational Pipe Thread• FPTFemale Pipe Thread• MPTMale Pipe Thread• PTFSAE short tape pipe thread• NPTFAmerican National taper pipe thread for

dryseal pressure-tight joints• NPSMAmerican National straight pipe thread for

mechanical joints• NPSIAmerican National straight intermediate

pipe thread

Page 3: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Nominal Size To OD Size Conversion Table

• O.D. Of Pipe

• 1/4"3/8"1/2"5/8"3/4"7/8"1-1/8"1-3/8"1-5/8"2-1/8“

• Nominal Pipe Size1/8"1/4"3/8"1/2"5/8"3/4"1"1-1/4"1-1/2"2"

Page 4: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

PVC CPVC ASB

Page 5: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

ABS fitting

Page 6: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Chlorinated Poly Vinyl Chloride (CPVC) Note: Yellowish

Page 7: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Regular 90's - S x S

http://www.plumbingsupply.com/images/pvc-fitting-406-regular-90-sxs.jpg
Page 8: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Reducing 90's - S x S

http://www.plumbingsupply.com/images/pvc-fitting-406-reducing-90-sxs.jpg
Page 9: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Threaded 90's - S x Fips

http://www.plumbingsupply.com/images/pvc-fitting-407-threaded-90-sxfips.jpg
Page 10: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Threaded 90's - Fips x Fips

http://www.plumbingsupply.com/images/pvc-fitting-408-threaded-90-fipsxfips.jpg
Page 11: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Street 90's - S x Spigot

http://www.plumbingsupply.com/images/pvc-fitting-409-street-90-sxspig.jpg
Page 12: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Threaded Street 90's - S x Mips

http://www.plumbingsupply.com/images/pvc-fitting-410-threaded-street-90-sxmips.jpg
Page 13: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Threaded Street 90's - Fips x Mips

http://www.plumbingsupply.com/images/pvc-fitting-412-threaded-street-90-fipsxmips.jpg
Page 14: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

All Street 90's - Spigot x Spigot

http://www.plumbingsupply.com/images/pvc-fitting-333-all-street-90-spigxspig.jpg
Page 15: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Regular 45's - S x S

http://www.plumbingsupply.com/images/pvc-fitting-417-regular-45-sxs.jpg
Page 16: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Unique 11-1/4° Elbow - S x S

http://www.plumbingsupply.com/images/pvc-fitting-411-11-025-elbow-sxs.jpg
Page 17: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Unique 22-1/2° Elbow - S x S

Page 18: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Side Outlet 90's - S x S x S

http://www.plumbingsupply.com/images/pvc-fitting-777-side-90-sxsxs.jpg
Page 19: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Side Outlets 90's - S x S x Fips

http://www.plumbingsupply.com/images/pvc-fitting-778-side-outlet-90-sxsxfips.jpg
Page 20: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Regular Tees - S x S x S

http://www.plumbingsupply.com/images/pvc-fitting-401-regular-tee-sxsxs.jpg
Page 21: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Reducing Tees - S x S x S

http://www.plumbingsupply.com/images/pvc-fitting-401-reducing-tee-sxsxs.jpg
Page 22: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Threaded Tees - S x S x Fips

http://www.plumbingsupply.com/images/pvc-fitting-402-threaded-tee-sxsxfips.jpg
Page 23: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Threaded Reducing Tees - S x S x Fips

http://www.plumbingsupply.com/images/pvc-fitting-402-reducing-threaded-tee-sxsxfips.jpg
Page 24: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Threaded Tees - Fips x Fips x Fips

http://www.plumbingsupply.com/images/pvc-fitting-405-threaded-tee-fipsxfipsxfips.jpg
Page 25: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Side Outlet Tees - S x S x S x S

http://www.plumbingsupply.com/images/pvc-fitting-779-side-outlet-tee-sxsxsxs.jpg
Page 26: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Regular Crosses - S x S x S x S

http://www.plumbingsupply.com/images/pvc-fitting-420-regular-cross-sxsxsxs.jpg
Page 27: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Regular Wyes - S x S x S

http://www.plumbingsupply.com/images/pvc-fitting-475-redgular-wye-sxsxs.jpg
Page 28: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Slip Caps - S

http://www.plumbingsupply.com/images/pvc-fitting-447-slip-cap.jpg
Page 29: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Threaded Caps - Fips

http://www.plumbingsupply.com/images/pvc-fitting-448-threaded-cap.jpg
Page 30: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Spigot Slip Plugs

http://www.plumbingsupply.com/images/pvc-fitting-449-slip-cap.jpg
Page 31: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Threaded Pugs

http://www.plumbingsupply.com/images/pvc-fitting-450-threaded-plug-mips.jpg
Page 32: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Couplings - S x S

http://www.plumbingsupply.com/images/pvc-fitting-429-coupling-sxs.jpg
Page 33: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Reducing Couplings - S x S

http://www.plumbingsupply.com/images/pvc-fitting-429-reducing-coupling-sxs.jpg
Page 34: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Threaded Couplings - Fips x Fips

http://www.plumbingsupply.com/images/pvc-fitting-430-threaded-coupling-fipsxfips.jpg
Page 35: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Threaded Reducing Couplings - Fips x Fips

http://www.plumbingsupply.com/images/pvc-fitting-430-reducing-coupling-fipsxfips.jpg
Page 36: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Slip Bushings - Spigot x S

http://www.plumbingsupply.com/images/pvc-fitting-437-slip-bushing-spigxs.jpg
Page 37: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Slip Threaded Bushings - Spigot x Fips

http://www.plumbingsupply.com/images/pvc-fitting-438-slip-bushing-spigxfips.jpg
Page 38: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Threaded Bushings - Mips x Fips

Page 39: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Slip Unions - S x S

Page 40: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Pipe Extenders - Spigot x Internal Spigot

Page 41: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Pipe Extenders - Internal Spigot x Internal Spigot

Page 42: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Threaded Extenders (Riser Extensions) - Fips x Mips

Page 43: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Male Hose Adapters

Page 44: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Female Hose Adapters

Page 45: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Vinyl Hose Washers

Page 46: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Slip Barbed Adapters - S x Barb

Page 47: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Female Adapters - S x Fips

Page 48: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Reducing Male Adapters - S x Mips

Page 49: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Reducing Close Nipples

Page 50: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Nipple

Page 51: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Teflon Tape

Page 52: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Flexible PVC Tube

Page 53: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Pipe Saw

Page 54: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

PVC Cutters

Page 55: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Pipe Wrench

Page 56: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Strap Wrench

Page 57: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

Steel Pipe Cutter

Page 58: Common Terms (and what they mean) S or Slip: A regular hub. The pipe glues into this (same O.D. as coupling) Mips: Male pipe threads on the outside of

SC Pipe Length Size O.D. Standard Length Size O.D ... px® chemical piping ... Prefabricated units are to be tested at the works place of prefabrication ... with manufactures recommendations

Natural Base Glues Adhesives P28913 M

Rayt AGRICULTURE Glues and Adhesives

ALBANY VISION CARE OF ALBANY ASSOCIATES IN EYE … · bilal ahmad, o.d. johnathan beauchamp, o.d. mohamed bharadia, o.d. aja bowling, o.d. michael brumit, o.d. james buckner, jr,

1) Strainer Dimensions - Cone - Triad-Measurement · Strainer Dimensions – Cone Flange Dimensions (in) Cone Length "L1" (in) Nominal Pipe Size I.D. O.D. Nominal Pipe Size 100% C-1

Gases, Glues And Aerosols

Contents€¦ · .063 Inch [1.59mm] O.D. VINL-063 CLMP-063 TFLN-063 or NYLN-063 NYCLMP-063.125 Inch [3.18mm] O.D. VINL-125 CLMP-125 TFLN-125 NYLN-125HW NYCLMP-125 NYCLMP-125HW Pipe

FIRE FIGHTING EQUIPMENTS - grupoincendios.comgrupoincendios.com/marketing/catalogos/FIRE_FIGHTING_V3-0.pdf · 6 REFERENCE SIZE NOMINAL SIZE PIPE O.D. DIMENSIONS UNIT WEIGHT CRATE

WEIGHTS OF PIPING MATERIALS –I NTRODUCTION The ......40 Anvil International, Piping & Pipe Hanger Design and Engineering WEIGHT OF PIPING MATERIALS – 11⁄ 2" PIPE (1.900" O.D.)

CASEIN GLUES: Tt1111? MANUFACTURE, PREPARATION, AND

Message From Representative Steven Tilley, O.D. the Dean ...Ph.D., John Crane, O.D., Edward Jarka O.D., M.S., and Thomas Landgraf, O.D. Guest speaker Joe Pizzamenti, O.D., is a member

SERVICE SADDLES - Southern Pipe & SupplyMODEL 3401 BRONZE SADDLE FOR IPS PVC HOW TO ORDER: Choose nominal pipe size x outlet size and thread configuration. EXAMPLE: 4” PVC O.D

Nickel Alloys • Stainless Steels Duplex Stainless Steels • Titanium … · 2019-04-15 · Pipe Dimensions and Weights Quote, Buy, Track at rolledalloys.com Pipe O.D. Size Inches

Medieval Glues Upto 1600 CE

M-SERIES...Piping Gas Pipe Size O.D. (Flared) In.(mm) 3/8 (9.52) Liquid Pipe Size O.D. (Flared) In.(mm) 1/4 (6.35) Maximum Piping Length Ft. (m) 65 Maximum Height Difference Ft. (m)

CITY OF LINCOLN, NEBRASKA, STANDARD SPECIFICATIONS … · 1. Polyvinyl Chloride (PVC) Pressure Pipe . PVC pressure pipe shall be cast iron pipe size O.D., meeting the requirements

Tooling Components Inc; Mold/Die/Polishing …...CASCADES - HEX KEY Hex Key Size Assemblies include: Brass Head o.D. 12" Stainless High Flow Tube 2" Galvanized Pipe Nipple Pipe Tap

Complete Guide to Woodworking Glues

 · Wall thickness Calculations ASME B31.3 (2010-Ed.) Date: 8/2212011 ... Mixer Housing Thickness Calculations Per Paragraph 304.1 Pipe Outside Diameter O.D

Pipe O.D. Chart - ebaa.com Outside... · Title: Pipe Outside Diameter Chart Author: Rick Rackow Subject: Chart listing various pipes and their outside diameters Created Date: 9/20/2010

Glues and Gluing Wood - LSU AgCenter

Glues & Adhesive Tape Products

12 - 84 RCP Tongue & Groove Detail...Feb 19, 2020  · Self-Centering Tongue And Groove Pipe I.D. Pipe Wall Pipe O.D. Joint Depth Pounds Per 8' Joint 12 Ø 3.00 18.29 Ø 3.54 1,260

GRUVLOK FITTINGS FOR GROOVED-END PIPE fittings for grooved-end pipe ... (expressed as equivalent straight pipe) nom. size o.d. pipe wall ... 90 101.6 114 2.5 41⁄ 4 o.d. 4.250 43

WOCAT GLUES Products - Leipzig Jan. 2015

STAINLESS STEEL FITTINGS STEEL FITTINGS PIPE TOLERANCE & HANGER SUPPORTS Pipe Size Pipe Tolerance Pipework Support Nominal O.D. Pipe O.D. Tolerance +/-Pipe Wall Thickness Sch. 5 Vertical

General Purpose Consumer Glues M03392 M

helix pipe dies - battenfeld.se · coat 800 VSI O.D. (350 x 0.5 to 800 x 7.0) mm 800 kg/h KryoS pipe dies Pipe die Outer diameter Warranty output* helix 25-250 KryoS O.D. (110

Yamcat glues 2013

PIPE/CONDUIT SUPPORTS - · PDF filePIPE/CONDUIT SUPPORTS Pipe/Conduit Clamps ... Design Load P1109 thru P1126 Pipe Clamps for Rigid Steel Conduit Pipe O.D. Wt/100 Design Part Size

Mastics, glues for marble, granite, stone

BLOOD AMAIN GLUES: THEIR MANUFACTURE, PREPARATION, …

Making glues Lesson 1

ROMAC Pipe O.D. ChartTitle: ROMAC Pipe O.D. Chart Author: ROMAC INDUSTRIES, INC. Created Date: 1/4/2007 12:16:36 PM

SC Pipe Length Size O.D. Standard Length Size O.D ... in BS 8301 & BS 5572. Pipe work to be tested in accordance with manufactures recommendations a method statement shall be submitted