communications uctt · • most versatile one-box test solution for bts, rn, or node b • most...
TRANSCRIPT
UCTTMAKING
COMMUNICATIONS
BETTER
• Next Generation Test Solution for 3G and 4G wireless networks
• Most versatile one-box test solution for BTS, RN, or Node B
• Most durable, withstands harsh environments per MIL-STD-810
• Measurement performance rivals laboratory instruments
POWERFUL NEXT GENERATION BASE STATION TESTER
Sage Instruments
240 Airport Boulevard
Freedom CA 95019-2614
PHONE 831.761.1000
FAX 831.761.1008
WEB www.sageinst.com
SPECTRUM ANALYZER
Range: 740 MHz to 2.2 GHz Trace Update Time: Min 100 ms, Max 170 ms Frequency Span: 10 KHz to 600 MHz Resolution Bandwidth: 100 Hz to 5 MHz Sweep Trigger: Free run, Single, External Sample Averaging: 1 to 100 Windowing: Uniform, Kaiser, Hanning, Hamming, Gaus Reference Level Range: -100 dBm to +60 dBm
(Ref Level = 0 dB) Measurement Range: -144 dBm to + 30 dBm Input Attenuation: 0 to 55 dB automatically selected Preamp: +20 dB (Manual) Absolute Amplitude Accuracy: +/- 1 dB Simultaneous Dynamic Range: 90 dB
SSB Phase Noise: -90 dBc/Hz max at 30 kHz offset Spurious Responses:
Residual (input terminated in 50 ohms): < -130 dBmSignal Related (2-tones, -26 dBm, 100 kHz spacing(Preamp OFF): > 70 dBc
Displayed Average Noise Level: -144 dBm (DANL in 100 Hz RBW, preamp on)
RF Input VSWR: 1.8:1 typical Display Range:
-200 dBm to + 60 dBm 1 to 15 dB/div in 1 dB steps. Ten divisions displayed
CABLE AND ANTENNA ANALYZER
Frequency Range: 740 MHz to 2.2 GHzcontinued
UCTT Specifications
Water Resistant perMIL-STD-810 10.4” SVGA with Touch ScreenLoaded < 8 kg
UCTTPOWERFUL NEXT GENERATION BASE STATION TESTER
Frequency Resolution: 125 kHz Data Points: 1024
Interference Immunity: On-Channel: +20 dBmOn-Frequency: 0 dBm (RF Out) +30 dBc RF in
Insertion Loss: Range: > 100 dBAccuracy: +/- 1 dB
Distance-to-Fault: Range: 200 MData Points: 1024Accuracy : Typical +/- 15 cmMeasurement Speed: 200 ms
Return Loss: Range: 0 to 100 dBResolution: 0.01 dB
VSWR: Range: 1 to 3.5Resolution: 0.01 dB
POWER METER
Frequency Range: 740 MHz to 2.2 GHz Display Range: -80 dBm to +80 dBm Measurement Range: -60 dBm to +30 dBm
Offset Range: 0 to +60 dB Accuracy: +/- 1 dB VSWR: < 1.8:1 typical Maximum Power: +30 dBm (1W) without external attenuator
INTERFERENCE ANALYZER
Strength of the Interferer: Locate the Interferer RSSI: Collect data up to 100 hours Spectrogram: Collect data upto 100 hours
CHANNEL SCANNER/ADJACENT CHANNEL POWER
Frequency Range: 740 MHz to 2.2 GHz Measurement Range: +30 dBm to -144 dBm Channel Power Accuracy: ±1.0 dB Adjacent Channel Power Accuracy: ±0.50 dBc Occupied Bandwidth Accuracy: ±100 kHz
GSM/GPRS/EDGE RF MEASUREMENTS
GSMK Modulation Quality RMS Phase Measurement Accuracy: ±1 deg Peak Phase Measurement Accuracy: ±1 deg Residual Error (GSMK): 1 deg Frequency Offset Accuracy: ±1 Hz TSC: 0-7 SBC: 0-2 Burst Type Capture:
Frequency Correction, Dummy, Normal, Synchronization, Access8PSK Modulation Quality (EVM) Measurement Accuracy: ±1.5% Residual Error (8PSK): 2.5% Frequency Offset Accuracy: ±1 Hz
GSM/EDGE MODULATION ANALYZER
IQ Diagram Burst Type Decode Frame Number Decode BSIC Number Decode
GSM/EDGE BURST ANALYZER
TimeSlot Mask per 3GPP-TS-05.05
GSM/EDGE RF MASK ANALYZER
Support for all Mask Templates per Annex B Reference Power Level: -90 dBm to +58 dBm
GSM ABIS MONITOR
Codec Type: GSM, AMR, ACELP TRAU FRAME Decode LAPD Decode
WCDMA/HSDPA RF MEASUREMENTS
Frequency Ranges: 740 MHz to 2.2 GHz RF Channel Power: ±0.5 dB typical Occupied Bandwidth Accuracy: ±100 kHz
MAKING
COMMUNICATIONS
BETTER
Residual Adjacent Channel Leakage Ratio (ACLR)1
-55 dB typical at 5 MHz offset-60 dB typical at 10 MHz offset
Leakage Ratio (ACLR):-55 dB typical at 5 MHz offset-60 dB typical at 10 MHz offset
ACLR Accuracy (Single Channel Active): ±0.5 dB for ACLR -45 dB at 5 MHz offset±0.5 dB for ACLR -50 dB at 10 MHz offset
Frequency Error: ±1 Hz + Time Base Error
WCDMA DEMODULATION AND WCDMA/HSDPA
Demodulator EVM Accuracy: (3GPP Test Model 4) ±2.5%; EVM 25%
(3GPP Test Model 5) ±2.5%; EVM 20%(2300 MHz to 2700 MHz)
EVM Accuracy2: ±2.5% for 6 EVM 20% Residual EVM: 2.5% typical Code Domain Power:
±0.5 dB for code channel power >-25 dB16, 32, 64 DCPH (test model 1)16, 32 DCPH (test model 2, 3)
CPICH (dBm) Accuracy: ±0.5 dB typical Scrambling Code: 3 seconds
T1 BERT
T1 Analyzer, Fractional T1 and sub-channels Line Coding: AMI, B8ZS Framing Modes:
D4 (Superframe), ESF (Extended Superframe) Connection Configurations: Terminate (100 Ω)
Bridge (100K Ω)Monitor (100 Ω)Drop&Insert (100 Ω)
Receiver Sensitivity: Terminate +6 dB to -36 dBBridge +6 dB to -36 dBMonitor 20 dB flat gain
Drop&Insert +6 dB to -36 dB Transmit Level: 0 dB, -7.5 dB, and -15 dB Clock Sources: External Bits clock Internal: 1.544 MHz ±5 ppm Pulse Shapes:
Conform to ANSI T1.403 and ITU G.703 Pattern Generation and Detection: PRBS: 2-9, 2-11, 2-15, 2-20, 2-23
Inverted and non-invertedQRSS, 1-in-8 (1-in-7), 2-in-8, 3-in-24,All ones, All zeros, T1-Daly, User defined (128 bits)
Circuit Status Reports:Carrier present, Frame ID and Sync., Pattern ID and Sync.
Alarm Detection: AIS, RAI Error Detection:
Frame Bits, Bit, BER, BPV, CRC, Error Sec Error Insertion:
Bit, BPV, Framing Bits, RAI, AIS Loopback Modes:
Self loop, CSU, NIU, User defined, In-band or Data Link Level Measurements:
Vp-p (±5%), can also display in dBdsx Data Log: Continuous, up to 48 hrs T1 Frequency Measurement: ±5 ppm DS0 Channel Access:
Tone Generator Frequency: 100 Hz to 3000 HzLevel: -30 to 0 dBm, with 1 dB steps
VF Measurement:Frequency: 100 Hz to 3000 Hz, ±1 HzLevel: -40.0 to +3.0 dBm, ±0.2 dBm
Audio Monitor: Manually select channel 1 to 24 ITU G.826 Analysis & G.821 Error Reporting:
Errored seconds, error free seconds, severelyerrored seconds, unavailable seconds, availableseconds, degraded minutes
continued
UCTTMAKING
COMMUNICATIONS
BETTER
POWERFUL NEXT GENERATION BASE STATION TESTER
2 MB/S - E1 BIT-ERROR-RATE-TESTER (BERT)
2 MB/S - E1 ANALYZER, TRAU-CHANNNELS
ARBITRARY RF SIGNAL GENERATOR
Frequency Range: 740 MHz to 2.2 GHz Power Output: 0 dBm, ± 5% Phase Noise: 85 dBc Waveforms: AMPS, TDMA, GSM, CDMA, WDCMA
GENERAL SPECIFICATIONS
Uplink/Downlink Channel Plans:AMPS,850CDMA,1900CDMA,GSM850,GSM900,GSM1800,GSM1900,UMTS1700,UMT2100
Maximum Continuous Input: +30 dBm Maximum Continuous Input without Damage: +33 dBm Tuning Resolution: 1 Hz Frequency Accuracy:
Internal Time Base Accuracy: ±0.1 ppm after warm-upInternal Time Base Aging: ±0.1 ppm/year GPS Lock: +/- 12.5 ppb (25˚C)
Frequency and Time Reference:Internal: Ovenized Crystal Reference, GPS derived 1ppsExternal: One Pulse Per Second, Even Second ClockMultiples of 1 MHz to 20 MHzMultiples of 1.2288 MHz to 19.6608 MHz2.048 MHz4.95 MHz
Interfaces:RF Out Port: Type-N F (50Ω)RF In Port: Type-N (50Ω)Ext Ref/Trig: BNC GPS Antenna: Reverse BNCDual E1/T1: Bantam Jack10/100 Bast T Ethernet: RJ45Ext DC Input: MIL-STD Circular USB Host Intf (used with USB Flash Drives) Type-BSVGA: MIL-STD CircularAudio: MIL-STD Circular
Environmental: MIL-STD-810-F Operating: -10-C to 55-C, humidity 85%Storage: -51-C to 71˚CAltitude: 5000 m
Safety: EN 61010-1, portable equipment Electromagnetic Compatibility: CE Size: 387 x 243 x 135 mm (14.0 x 9.0 x 5 in.) Weight: 6.8 kg (15 lbs.)
Sage Instruments
240 Airport Boulevard
Freedom CA 95019-2614
PHONE 831.786.3387
FAX 831.761.1008
WEB www.sageinst.com