compact cylinder iso 21287, series “liner”, Ø … iso 21287.pdf · 116 compact cylinder iso...
TRANSCRIPT
116
COMPACT CYLINDER ISO 21287,SERIES “LINER”, Ø 20÷100
Compact cylinder to ISO 21287, LINER series, availablein different versions to meet all possible requirements:• with or without magnet• Double acting, single or through piston rod• Double acting, perforated through piston rod• Single acting, extended, retracted or through piston rod• Single acting, perforated through rod• Double acting anti-rotating version and double acting
through piston rod• Polyurethane or FKM/FPM gaskets (for high temperatures)
also available• Dimensions and centre distances to ISO 21287.The heads have been eliminated for ease of installation,improved sturdiness and precision. The metal lining isdesigned to withstand heavy-duty work, tensile stress andimpact. Technopolymer parts can withstand dynamic andpneumatic thrust. The lining virtually acts as a "bearing" towhich most of user accessories are attached.The wide range of anchors provide numerous fixing points.Retractable magnetic limit switches can be mounted toidentify the position in the cylinder grooves.
POLYURETHANE FKM/FPM
max 10 bar (max 1 Mpa - 145 psi)-10°C ÷ +60°C (ø20÷63) -10°C ÷ +150°C ( non-magnetic cylinders )-10°C ÷ +80°C (ø80÷100)
Unlubricated air. Lubrication, if used, must be continuous.ø20; ø25; ø32; ø40; ø50; ø63; ø80; ø100 with ISO 21287 fixing centre distances.
With profileDouble-acting, Double-acting through-rod, Single-acting extended or retracted rod, Single-acting through-rod,
Double-acting through-rod perforated, Double-acting non-rotating, Double-acting through-rod non-rotating, No stick slipAll versions are available with male or female piston rod.
All versions come complete with magnet. Supplied without magnet on request.For correct operation, it is advisable to use 50μm filtered air
For no-stick slip versions, use no-lubricated air onlyfrom ø20 to ø32: 0.6 bar - from ø40 to ø100: 0.4 bar
See page 131See page 131
TECHNICAL DATAOperating pressureTemperature range
FluidBores mmDesignVersions
Magnet for sensorsNotes
Inrush pressureForces generated at 6 bar thrust/retractionWeights
COMPONENTS Ø 20÷25
� PISTON ROD: stainless steel, thick chromed� END CAP: high-performance technopolymer� BARREL: drawn anodised and calibrated aluminium alloy� PISTON GASKET: polyurethane or FKM/FPM (for high
temperature)� MAGNET: plastoneodimio� PISTON ROD GASKET: polyurethane or FKM/FPM (for high
temperature)� GUIDE BUSHING: sintered bronze STATIC O-RINGS: NBR or FKM/FPM (for high temperature)
4 5 8
7 36 21
COMPONENTS Ø 32÷63
� PISTON ROD: C45 stell or stainless steel, thick chromed� END CAP: high-performance technopolymer� BARREL: drawn anodised and calibrated aluminium alloy� PISTON GASKET: polyurethane or FKM/FPM (for high
temperature)� MAGNET: Ø32 plastoneodimio - Ø40÷63 plastoferrite� PISTON ROD GASKET: polyurethane or FKM/FPM (for high
temperature)� GUIDE BUSHING: sintered bronze STATIC O-RINGS: NBR or FKM/FPM (for high temperature)
4 5 8
7 36 21
COMPONENTS Ø 80, Ø 100
� PISTON ROD: C45 stell or stainless steel, thick chromed� END CAP: anodized aluminium alloy� BARREL: drawn anodised and calibrated aluminium alloy� PISTON GASKET: polyurethane or FKM/FPM (for high
temperature)� MAGNET: plastoferrite� PISTON ROD GASKET: polyurethane or FKM/FPM (for high
temperature)� GUIDE BUSHING: steel strip with bronze and PTFE insert STATIC O-RINGS: NBR or FKM/FPM (for high temperature)
4 5 8
7 36 21
COMPACT CYLINDER ISO 21287 FIXING OPTIONS
EC DA B
• Fixing to structural work with a through screw, using the thread in the heads (Fig. A)• Direct fixing from above using long through screws or tie rods (Fig. B). Non-magnetic stainless steel must be used (e.g. AISI 304)• Fixing with feet; the ordering code covers the supply of one foot and two screws for fixing to the cylinder (Fig. C).• Fixing with a flange mounted on the front or rear head; the ordering code covers the supply of a flange and four screws for fixing
to the cylinder (Fig. D).• Fixing with articulated hinge to compensate for slight system misalignment and turn freely (Fig. E).
The ordering code covers the supply of a hinge and four screws for fixing to the cylinder.
117
MAXIMUM LOADS FOR NON-ROTATING VERSION
STROKES FOR COMPACT CYLINDERS ISO 21287
Standard stroke for single-acting cylindersØ 20; Ø 100 � 25 mm
Standard stroke for other typesØ 20; Ø 25 � da 5 a 60 mmØ 32÷Ø 100 � da 5 a 80 mm
Max. recommended strokes for other typesØ 20; Ø 25 � 300 mmØ 32÷Ø 63 � 400 mmØ 80; Ø 100 � 500 mm
Max. recommended strokes for non-rotating cylindersØ 20÷Ø 63 � 120 mmØ 80; Ø 100 � 150 mm
Max recommended strokes for through-rod perforatedØ 20÷Ø 40 � 5 a 80 mmØ 50; Ø 63 � 5 a 100 mmØ 80; Ø 100 � 5 a 160 mm
Maximum recommended strokes. Higher values can create operating problems
FORCE OF SPRINGS IN SINGLE-ACTING CYLINDERS (THEORETICAL)
BoreMin. load (N)Max. load (N)
Ø 208.4020.90
Ø 2513.9033.20
Ø 3219.0035.90
Ø 4024.8053.70
Ø 5036.3062.20
Ø 6350.2082.30
Ø 8077.60118.90
Ø 100131.80183.30
NOTES
118
ø32
ø50-63
ø80ø100
ø40
ø20-25
1008020 40 60 12000
L (mm)
240
220
180
100
120
140
160
200
20
40
60
80
F (N
)
FL
ø40
ø50-63
ø32
ø80-100
L (mm)0 8020 40 60 120100
F (N
)
180
100
120
140
160
200
20
40
60
80
0
ø20-25
FL
Mt
ø63
ø100
ø80
ø32
ø50
ø40
ø20ø25
Mt (
Nm
)
00 1401201008020 40 60
2
4
6
8
10
12
14
16
18
20
TRANSVERSAL FORCEFOR NON-ROTATING
TRANSVERSAL FORCE FORNON-ROTATING THROUGH-ROD
TORQUE DEPENDINGON STROKE
Stroke (mm)
DIMENSIONS OF DOUBLE-ACTING Ø 20÷50 AND SINGLE-ACTING Ø 20÷50
22
1
284-294
280-290
283-293
CH1
CH1
CH
TG
E
E1
* T2
WH
EE TG E
ZB+
RT
AF
LA LA
PL
ZA+
BG BG
PL
KF
WH+
KK
AM
WH+
KK
AM
ØM
M
ØD
5
ØRR
ØD
1
SE-DE MALE PISTON ROD
SE EXTENDED PISTON ROD
SE MALE EXTENDED PISTON ROD
Ø 20Ø 25Ø 32Ø 40Ø 50
AF141416.516.517
AM1616191922
BG17.517.521.521.521
CH88101013
CH11313171719
ØD1H9
66666
D57.57.59910.5
E35.539.54755.566.5
E136.54048.256.567.8
EEM5M5G1/8G1/8G1/8
KFM6M6M8M8M10
KKM8M8M10x1.25M10x1.25M12x1.25
LA4.24.2444.5
ØMM1010121216
PL1213161615.5
ØRR4.24.25.15.16.8
RTM5M5M6M6M8
T233.5443
WH66778
ZB4345515253
+ = ADD THE STROKE* = SECTION WITH TOLERANCE1 = SENSOR SLOT2 = SEAT FOR DIN 7984 SCREWS
TG±0.2
222632.53846.5
DIMENSIONS OF DOUBLE-ACTING Ø 63÷100 AND SINGLE-ACTING Ø 63÷100
22
1
284-294
280-290
283-293
CH1
CH1
PL1
WH PL
RT
ZB+
PL
KF
AF
E
BG
ZA+
BG E
E1
TG
EE
LA
CH
TGLA
PL1
* T2
AM
KK
WH+
AM
KK
WH+
ØM
M
ØD
5
ØRR
ØD
1
+ = ADD THE STROKE* = SECTION WITH TOLERANCE1 = SENSOR SLOT2 = SEAT FOR DIN 7984 SCREWS
Ø 63Ø 80Ø 100
AF172224
AM222828
BG2122.525.5
CH131722
CH1192430
ØD1H9
888
ØD510.51414
E76.595.5114
E178.395.5114
EEG1/8G1/8G1/8
KFM10M12M12
KKM12x1.25M16x1.5M16x1.5
LA4.555
ØMM162025
PL181419
PL15.516.519.2
ØRR6.88.58.5
RTM8M10M10
WH81010
TG ±0.2
56.57289
T23.544
ZB576477
119
ZA3739444545
+0.3 –0
ZA495467
+0.4 –0
SE-DE MALE PISTON ROD
SE EXTENDED PISTON ROD
SE MALE EXTENDED PISTON ROD
DIMENSIONS OF THROUGH-ROD Ø 20÷50
1
2
2
285-295
282-292
286-296
281-291
CH1
ZM++
AF
PL
CH
TG
E
E1
LA
WH+
AF
EE TG E
LA
ZB+
WHPL
RT
KF
ZA+
BG BG
KF
KK
AM ZM++ AM
ØM
M
ØD
5
ØRR
ØP1
ØP2
MIN
SE-DE MALE PERFORATEDTHROUGH-ROD
Ø 20Ø 25Ø 32Ø 40Ø 50
AF141416.516.517
AM1616191922
BG17.517.521.521.521
CH88101013
CH11313171719
ØD57.57.59910.5
E35.539.54755.566.5
E136.54048.256.567.8
EEM5M5G1/8G1/8G1/8
KFM6M6M8M8M10
KKM8M8M10x1.25M10x1.25M12x1.25
LA4.24.2444.5
ØMM1010121216
ØP133446
ØRR4.24.25.15.16.8
RTM5M5M6M6M8
WH66778
ZB4345515253
+ = ADD THE STROKE++ = ADD TWICE THE STROKE1 = SENSOR SLOT2 = SEAT FOR DIN 7984 SCREWS
TG±0.2
222632.53846.5
ØP21.51.52.52.54
PL1213161615.5
ZM4951585961
DIMENSIONS OF THROUGH-ROD Ø 63÷100
2
1
2
285-295
282-292
286-296
281-291
CH1
ZB+
AF
WH
RT
LALA
PL1
PL
ZM++
BG
ZA+
WH+
AF
PL
E
E
E1
TG
EE
CH
PL1
TG
KF
BG
ZM++AM
KK
AM
ØM
M
ØD
5
ØRR
ØP1
ØP2
MIN
+ = ADD THE STROKE++ = ADD TWICE THE STROKE1 = SENSOR SLOT2 = SEAT FOR DIN 7984 SCREWS
120
ZA3739444545
+0.3 –0
SE-DE MALE PERFORATEDTHROUGH-ROD
Ø 63Ø 80Ø 100
AF172224
AM222828
BG2122.525.5
CH131722
CH1192430
ØD510.51414
E76.595.5114
E178.395.5114
EEG1/8G1/8G1/8
KFM10M12M12
KKM12x1.25M16x1.5M16x1.5
LA4.555
ØMM162025
PL181419
ØRR6.88.58.5
RTM8M10M10
WH81010
ZB576477
TG±0.2
56.57289
PL15.516.519.2
ZM657487
ZA495467
+0.4 –0ØP1
6G1/8G1/8
ØP2456
DIMENSIONS OF NON-ROTATING Ø 20÷50
1
22
297
CH
TG
TG
D6
E
E1
EE E
PL
* T2
ME
WH
ZB+
* T1
LA
BG
RT
LA
ZA+
BG
PL
TG
TG
ØD
7
ØM
M
ØD
5
ØRR
ØD
1
ØD4
ØFB
NON-ROTATING FEMALE THROUGH-ROD NON-ROTATING MALE THROUGH-ROD
29A
WH WH+
KF
ZM++
AF CH1
28A
WH WH+
ZM++
KK
AM
+ = ADD THE STROKE* = SECTION WITH TOLERANCE1 = SENSOR SLOT2 = SEAT FOR DIN 7984 SCREWS
+ = ADD THE STROKE++ = ADD TWICE THE STROKE
+ = ADD THE STROKE++ = ADD TWICE THE STROKE
Ø 20Ø 25Ø 32Ø 40Ø 50
AF141416.516.517
AM1616191922
BG17.517.521.521.521
CH88101013
CH11313171719
ØD1H9
66666
E35.539.54755.566.5
E136.54048.256.567.8
EEM5M5G1/8G1/8G1/8
ØFB45556
KFM6M6M8M8M10
LA4.24.2444.5
ME88101012
ØMM1010121216
ØD41722283342
ØD57.57.59910.5
D6M4M5M5M5M6
ØD7H9
-14171722
KKM8M8M10x1.25M10x1.25M12x1.25
ØRR4.24.25.15.16.8
RTM5M5M6M6M8
WH66778
ZB4345515253
TG±0.2
222632.53846.5
ZM4951585961
T1-3.53.53.55
T233.5443
Ø 20Ø 25Ø 32Ø 40Ø 50
121
ZA3739444545
+0.3 –0
PL1213161615.5
22
1
CH
297
ZB+
WH
TG
* T1
E
D6
E1
PL1
PL1
TG
ME
PL PL
RT
* T2
TG
E
EE
TG
ØD
7
ØM
M
ZA+
BG BG
LA LAØD
5
ØRR
ØD
1
ØD4
ØFB
DIMENSIONS OF NON-ROTATING Ø 63÷100
NON-ROTATING FEMALE THROUGH-ROD NON-ROTATING MALE THROUGH-ROD
+ = ADD THE STROKE* = SECTION WITH TOLERANCE1 = SENSOR SLOT2 = SEAT FOR DIN 7984 SCREWS
Ø 63Ø 80Ø 100
AF172224
AM222828
BG2122.525.5
CH131722
CH1192430
ØD1H9
888
E76.595.5114
E178.395.5114
EEG1/8G1/8G1/8
ØFB6810
KFM10M12M12
LA4.555
ME121414
ØMM162025
ØD4506580
ØD510.51414
D6M6M8M10
ØD7H9
222424
KKM12x1.25M16x1.5M16x1.5
ØRR6.88.58.5
RTM8M10M10
WH81010
ZB576477
TG±0.2
56.57289
PL15.516.519.2
ZM657487
T157.57.5
T23.544
Ø 63Ø 80Ø 100
PL181419
122
ZA495467
+0.4 –0
29A
WH WH+
KF
ZM++
AF CH1
28A
WH WH+
ZM++
KK
AM
+ = ADD THE STROKE++ = ADD TWICE THE STROKE
+ = ADD THE STROKE++ = ADD TWICE THE STROKE
� Can also be used as double-acting with spring return� For versions 29 only (female piston rod)� For Ø20÷25 the standard version (0 or S)� In the code of cylinder with letter in fourth position Ø 100 becomes A1� Only for standard double acting and standard through rod double acting version� Compulsory for Ø20 and Ø25 version Z� Only for Ø32÷63 P version (Polyurethane gaskets)� Only for Ø20÷63 P version (Polyurethane gaskets)� Only for Ø32÷100 V version (FKM/FPM gaskets) and for Ø80 and 100 P version (Polyurethane gaskets) Only for Ø20÷100 V version (FKM/FPM gaskets) and for Ø80 and 100 P version (Polyurethane gaskets)
KEY TO CODE
CIL 2 8
28 Compactcylinder
ISO 21287male piston rod
29 Compactcylinder
ISO 21287female piston rod
0 2 0
20253240506380
�100
0 5 0 P
TYPE STROKE��
P Polyurethanegaskets
� V FKM/FPMgaskets
0
0 Standard
0
CONFIGURATIONBORE
X
NOTES
123
0 Double-acting1 Double-acting
through-rod2 Double-acting
through-rodperforated
� 3 Single-actingretractingpiston rod
� 4 Single-actingextendedpiston rod
� 5 Single-actingthrough-rod
� 6 Single-actingthrough
piston rodperforated
� 7 Double-actingnon-rotating
A Double-actingthrough-rodnon-rotating
0 Magnetic S Non-
magnetic�G No stick
slip
� C C45piston rod
Chromium-plated� X Stainless
steel piston rod,and nut
� A C45 chromed rod,
aluminiumpiston
Z Stainless steelpiston
rod and nutaluminium
piston
�� For the maximum suppliabe stroke, see page 3
124
MR
L
XD+
CB
UB
FL
CD
SA+
AO
AH
AB
AT
TR
E
AU
XA+
FOOT - MODEL A
ACCESSORIES
Ø20253240506380100
CodesW0950206001W0950256001W0950322001W0950402001W0950502001W0950632001W0950802001W0951002001
ØAB6.66.679991214
AH2730*32*36*45506371*
AO6611*15*15*15*20*25*
AT44445566
AU161624*28*32*32*41*41*
E36404552657595115
SA697192*101*109*113*136*149*
TR2226323645506375
XA596175*80*85*89*105*118*
FEMALE HINGE-MODEL B
Ø3240506380100
CodesW0950322003W0950402003W0950502003W0950632003W0950802003W0951002003
CB H14
262832405060
ØCD H9
101212161620
FL222527323641
L121515202025
MR101212161620
UB H14
4552607090110
XD73778089100118
MR
EW
CD
FL
XD+
L
MALE HINGE-MODEL BA
Ø20253240506380100
CodesW0950206004W0950256004W0950322004W0950402004W0950502004W0950632004W0950802004W0951002004
ØCD H9
88101212161620
EW1616262832405060
FL2020222527323641
L1414121515202025
MR88111313171721
XD636573778089100118
Weight [g]465276100162266456572
Weight [g]1121592503906681047
Weight [g]444894124220316578850
Note: Supplied with 4 screws, 4 washers, 2 snap-rings and 1 pin.
Note: Supplied with 4 screws, 4 washers
Note: Individually packed with 2 screws.
* IMPORTANT: Values not to ISO 21287. Cylinder pins to ISO 15552 are used.
+ = ADD THE STROKE
+ = ADD THE STROKE
+ = ADD THE STROKE
125
MF
TF
ZF+
RMF
UF
E
FB
MF
ZF+
MF
FBTF U
F
E
FLANGE Ø 20÷25 - MODEL C (FRONT AND REAR)
Ø2025
CodesW0950206002W0950256002
E3640
ØFB6.66.6
MF10�10�
TF5560
UF7076
ZF53�55�
FLANGE Ø 32÷100 - MODEL C (FRONT AND REAR)
Ø3240506380100
CodesW0950322002W0950402002W0950502002W0950632002W0950802002W0951002002
E5055657595115
ØFB79991214
MF101012121616
R323645506375
TF647290100126150
UF8090110120153178
ZF616265698093
MS
R1
XN+
EX DL
CX
ARTICULATED MALE HINGE - MODEL BAS
Ø3240506380100
CodesW0950322006W0950402006W0950502006W0950632006W0950802006W0951002006
ØCX101212161620
DL222527323641
EX141616212125
MS161821232830
R1121519202425
XN73778089100118
Weight [g]184226
Weight [g]24629052267014202040
Weight [g]106142236336572840
Note: Supplied with 4 screws.
Note: Supplied with 4 screws, 4 washers.
Note: Supplied with 4 screws.
� Non ISO 21287 norm fixing distance
+ = ADD THE STROKE
+ = ADD THE STROKE
+ = ADD THE STROKE
126
M
FLANGE FOR OPPOSITE CYLINDERS
Ø20253240506380100
M12.51314.514.514.514.516.519.5
Codes09502030600950253060095032306009504030610950503061095063306109508030610951003061
ASSEMBLING OPPOSING CYLINDERS
B12
øM
F
L
B
A
C
DN
FORK - MODEL GK-M
Ø20253240506380100
CodesW0950200020W0950200020W0950322020W0950322020W0950402020W0950402020W0950502020W0950502020
A1616202024243232
B88101012121616
C16162020242432324
DM8M8M10x1.25M10x1.25M12x1.25M12x1.25M16x1.5M16x1.5
F3232404048486464
L4242525262628383
ØM88101012121616
N2222262632324040
Weight [g]48489292148148340340
Weight [g]455788106158258452801
Note: Supplied complete with 1 pin, 4 screws.
Note: Individually packed.
127
H7
CH
-0.1
2+
0
B1
F
L
D
C
A
øM
B
øG øG1
ROD EYE - MODEL GA-M
Ø20253240506380100
CodesW0950200025W0950200025W0950322025W0950322025W0950402025W0950402025W0950502025W0950502025
ØG1
1°30
'1°
30'
CH
P
B
B
øD1
F
øD
øG
S1 S
A
AC
COMPENSATION JOINT - MODEL GA
A2424282832324242
B1212141416162121
B19910.510.512121515
C1313151517172323
CH1414171719192222
DM8M8M10x1.25M10x1.25M12x1.25M12x1.25M16x1.5M16x1.5
F3636434350506464
ØG12.512.5151517.517.52222
ØG11616191922222727
L4848575766668585
ØM88101012121616
Ø3240506380100
CodesW0950326021W0950326021W0950406021W0950406021W0950506021W0950506021
A494959597979
B363642425858
C303036364444
ØD111114141717
ØD16.56.58.58.510.510.5
FM10x1.25M10x1.25M12x1.25M12x1.25M16x1.5M16x1.5
ØG39.539.544445959
ØG1171719192626
P6.56.58.58.510.510.5
S121215152020
S1101013.513.51515
Weight [g]50507878116116226226
Weight [g]172172286286628628
I
LF
C
A
E
G
N
B
M
H
D
COUNTER-HINGE CETOP Ø 32÷100
Ø3240506380100
CodesW0950322008W0950402008W0950502008W0950632008W0950802008W0951002008
A262832405060
B192626333344
C799111114
D101212161620
E253232404050
F203232505070
G324545636390
H3754547575103
I415252636380
L182525323240
M81010121216
N101212151522
Weight [g]96216212440464985
Note: Supplied complete with 4 screws, 4 washers.
Note: Individually packed.
Note: Individually packed.
CH131315152222
128
R
S
F
A
C
øD
øMB
E
COUNTER-HINGE Ø 16÷25 - MODEL BC
Ø2025
CodesW0950200005W0950200005
A3232
B3030
C2020
ØD6.56.5
E44
F3030
ØM88
R1010
S44
5°
5°
SW4SW5
SW3
SW1
SW2B
D
A A øF
C
øE
SELF ALIGNING ROD COUPLER - MODEL GA-K
Ø20253240506380100
CodesW0950200030W0950200030W0950322030W0950322030W0950402030W0950402030W0950502030W0950502030
AM8M8M10x1.25M10x1.25M12x1.25M12x1.25M16x1.5M16x1.5
B2020202024243232
C2020202020203232
D575771717575103103
ØF12.512.5222222223232
SW177121212122020
SW21717303030304141
SW31717303030304141
SW41111191919193030
SW51313171719192424
Weight [g]7878
Weight [g]5656216216220220620620
4
1
6.6
M35 M4
3
10
2.5
SLOTTED FIXINGPLATE
DescriptionFIXING BLOCK
Codice0950003000
Note: Supplied complete with 1 M3 grub screw and 1 M4 grub screw.
Note: Supplied complete with 1 pin and and 2 snap rings
Note: Individually packed.
ØE44444444
Weight [g]2
129
5.8 500
4.9
BAR FOR GROOVING
DescriptionBAR FOR GROOVING L=500 mm
CodeW0950000160
RETRACTABLE SENSOR WITH INSERTION FROM ABOVE
DescriptionHALL N.O. SENSOR, VERTICAL INSERTION 2.5mHALL N.O. SENSOR, VERTICAL INSERTION 300 mm M8REED N.O. SENSOR, VERTICAL INSERTION 2.5mREED N.O. SENSOR, VERTICAL INSERTION 300 mm M8HALL N.O. SENSOR, VERTICAL INSERTION 2m ATEX
CodeW0952025390W0952029394W0952022180W0952028184W0952125556
Note: The code corresponds to 1 piece.
This type of sensor can be inserted in the slot of the sensor from above. This means thecylinder heads do not require a through opening.
black
HALL EFFECT+
+
brown
blue
PNP
blue
black
-
blue
brown
brown
3
4
1
REED EFFECT+
+-
brown
3blue 4
1
M8
M8
WIRING DIAGRAM TECHNICAL DATA
Type of contactSwitchSupply voltage (Ub) VPower WVoltage variationVoltage drop VInput current mAOutput current mASwitching frequency HzShort-circuit protectionOver-voltage suppressionPolarity inversion protectionEMCLED displayMagnetic sensitivityRepeatabilityDegree of protection (EN 60529)Vibration and shock resistanceTemperature range °CSensor capsule material2.5m/2m connecting cableConnecting cable with M8x1Wire NO.
Reed Effetto Hall Effetto HallN.O. N.O. N.O.
- PNP PNP10 ÷ 30 AC/DC 10 ÷ 30 DC 18 ÷ 30 DC3 (peak valve=6) 3 ≤ 1.7
- ≤ 10% di Ub ≤ 10% di Ub- ≤ 2 ≤ 2.2- ≤ 10 ≤ 10
≤ 100 ≤ 100 ≤ 70≤ 400 ≤ 5000 1000
- Yes Yes- Yes Yes- Yes Yes
EN 60 947-5-2 EN 60 947-5-2 EN 60 947-5-2Yellow Yellow Yellow
2,8 mT ±25% 2,8 mT ±25% 2.6≤ 0,1 mT ≤ 0,1 mT ≤ 0,1 (Ub and ta fixed)
IP 67 IP 67 IP 68, IP 69K30 g, 11 ms, 10÷55 Hz, 1mm 30 g, 11 ms, 10÷55 Hz, 1mm 30 g, 11 ms, 10÷55 Hz, 1mm -25 ÷+75 -25 ÷ +75 -20 ÷ +45
PA66 + PA6I/6T PA66 + PA6I/6T PAPVC; 2 x 0,12 mm2 PVC; 3 x 0,14 mm2 PVC; 3 x 0,12 mm2
Polyurethane; 2 x 0,14 mm2 Polyurethane; 3 x 0,14 mm2 -2 3 3
ATEX
130
COMPACT CYLINDERS ISO 21287 (POLYURETHANE)
13
11
176 12 10
4 5 8
72
TypeComplete set of gaskets polyurethaneComplete set of gaskets polyurethaneComplete set of gaskets polyurethaneFront head kitFront head kitRear head kitRear head kitPiston kit polyurethanePiston kit polyurethanePiston kit polyurethaneMagnetMagnetFront + rear cylinder head + piston kit polyurethaneFront + rear cylinder head + piston kit polyurethaneFront + rear cylinder head + piston kit polyurethane
Parts� �
� � �� � � � �
� � � � �
� �� �
� � � �� � �
�� �
� � � � � � � � � � � � � �
� � � � � � �
BoresØ 20, Ø 25Ø 32÷63
Ø 80, Ø 100Ø 20, Ø 25, Ø 80, Ø 100
Ø 32÷63Ø 20, Ø 25, Ø 80, Ø 100
Ø 32÷63Ø 20, Ø 25Ø 32÷63
Ø 80÷100Ø 20, Ø 25, Ø 80, Ø 100
Ø 32÷63Ø 20, Ø 25Ø 32÷63
Ø 80, Ø 100
Codes009 . . .L001009 . . .L001009 . . .L001009 . . .L101009 . . .L101009 . . .L201009 . . .L201009 . . . 7401009 . . .L401009 . . . 7401009 . . . 7501009 . . .L501009 . . .L901009 . . .L901009 . . .L901
SPARE PARTS
NOTES
131
Cylinderbore D
mm
Piston roddiameter d
mmMotion
1 bar 2 bar 3 bar 4 bar 5 bar 6 bar 7 bar 8 bar 9 bar 10 barThrust and traction force in daN depending on the operating pressure in bar.Useful
areacm2
20
25
32
40
50
63
80
100
10
10
12
12
16
16
20
25
thrusttraction
thrusttraction
thrusttraction
thrusttraction
thrusttraction
thrusttraction
thrusttraction
thrusttraction
3.142.36
4.914.12
8.046.91
12.5711.44
19.6317.62
31.1729.16
50.2747.12
78.5473.63
3.12.4
4.94.1
8.06.9
12.611.4
19.617.6
31.229.2
50.347.1
78.573.6
6.34.7
9.88.2
16.113.8
25.122.9
39.335.2
62.358.3
100.594.2
157.1147.3
9.47.1
14.712.4
24.120.7
37.734.3
58.952.9
93.587.5
150.8141.4
235.6220.9
12.69.4
19.616.5
32.227.6
50.345.7
78.570.5
124.7116.6
201.1188.5
314.2294.5
15.711.8
24.520.6
40.234.6
62.857.2
98.288.1
155.9145.8
251.3235.6
392.7368.2
18.814.1
29.524.7
48.341.5
75.468.6
117.8105.7
187.0175.0
301.6282.7
471.2441.8
22.016.5
34.428.9
56.348.4
88.080.0
137.4123.4
218.2204.1
351.9329.9
549.8515.4
25.118.8
39.333.0
64.355.3
100.591.5
157.1141.0
249.4233.3
402.1377.0
628.3589.0
28.321.2
44.237.1
72.462.2
113.1102.9
176.7158.6
280.6262.5
452.4424.1
706.9662.7
31.423.6
49.141.2
80.469.1
125.7114.4
196.3176.2
311.7291.6
502.7471.2
785.4736.3
FORCES GENERATED DURING THRUST AND TRACTION (THEORETICAL)
GENERALE TECHNICAL DATA
Ø
20253240506380
100
Compact cylinders ISO 21287
98119182228330461991
1869
2.492.633.624.095.676.52
10.1113.78
110133197243355487
10662029
3.103.244.504.987.258.10
12.5817.63
WEIGHT OF CYLINDERS
NOTES
Single-rodWeight [g]each mm
Weight [g]Stroke=0
Weight [g]each mm
Weight [g]Stroke=0
Through-rod