Company presentation

www.phoesys.com

Agenda

• Introduction• Investors• Euro-Centrum Science and Technology Park• Phoenix Systems - Founders• Genesis of Phoenix Systems• Team• Phoenix-RTOS• Smart Grid• Configurable processors• Startegy

Phoenix Systems - Introduction

• Technological start-up established in December 2011,

• Shareholders – individuals (75%) and seed fund (25%),

• Venture valuation: ~1M USD,

• Engineering office in Warsaw, UK office in Bristol (SETsquared Business Acceleration Centre),

• Development of Phoenix-RTOS operating system for embedded systems and configurable processors,

• Business model – selling licenses for Phoenix-RTOS and embedded software engineering services,

• Company established by people with rich experience in business and technology developments confirmed by successful technology commercialisations.

Investors

• Paweł Pisarczyk, CEO• Jacek L. Madajczyk, President of the Supervisory Board

Euro-Centrum Science and Technology Park

• Established in 2007,

• Focused on developing energy efficient technologies and energy saving in buildings,

• Park support creating and development of companies based on innovative ideas in the area of saving energy in buildings as well as renewable energy,

• Park provides financial support to create of new companies developing innovative products focused on renewable sources of energy,

• Cooperate with experienced leaders of branch of business, including companies and technical universities focused around Euro-Centrum Cluster of Energy Saving Technologies,

• All buildings of Euro-Centrum use energy-efficient solutions and serve the scientists as a research area. There are also works carried out on the first passive office block in Poland which shall be fully energetically efficient.

Company founders – Paweł Pisarczyk (1)

• CEO of Phoenix Systems

• Graduated magna cum laude from the Department of Electronics and Information Technologies of Warsaw University of Technology (Master’s Degree 2001).

• Author of Phoenix-RTOS operating system.

• Pursuing an academic career in Computer Science Institute of Warsaw University of Technology being the author or co-author of over 40 scientific papers and articles.

• Over 19 years experience in software development, over 11 years experience in embedded systems development, over 6 years experience in highly-skilled engineering team building and management.

• Many proposals to work in U.S.A. – from Palm (2007) to take responsibility for operating system development, from D.E. Shaw Research (2007, 2008) to work on operating system for specialized computer for biochemistry, from some smaller companies involved in embedded systems development.

• Pawel’s speciality is the research and advanced technology development and highly-skilled engineering team building and management.

Company founders – Paweł Pisarczyk (2)

• Since 2003 - working for ATM S.A. on various positions starting from Senior System Engineer and completing as CEO of R&D center and CEO of ATM Software:• main architect of products and services for next generation multimedia

services,• developed technology is commercialized and widely used in many

multimedia initiatives.

• 2002 - 2003 - development of IMMOS company intended for embedded systems software engineering (projects are described on next slides).

• 1999 - 2002 - holding various position in software projects:• AVET INS - development of software for firewall based on TrustedOS,• CRONIX - development of server software for internet games,• DRACO - development of server software for GIS based rescue system,

simulating pollution propagation, for major chemical plant in Poland,• CIOP - development of machine vision system for labor protection.

• 1995 - 1999 - working for Institute of Plasma Physics and Laser Microfusion:• software development for multichannel high-speed image acquisition

systems for experimental results analysis,• development of application system for ICPIG’99 conference (biggest

plasma physics conference).

Company founders – Paweł Pisarczyk (3)

Control software for Automatic Dicing Saw:

• advanced project developed in years 2002-2003 as IMMOS company for small competitor of DISCO company,

• control software (based on QNX) for robot used in production of silicon chips, for high-precision (1 μm) cutting,

• development of all software layers starting from device drivers to cutting applications,

• robots are deployed in many countries, especially in France (in world leading vendor of piezoelectric transducers).

Company founders – Paweł Pisarczyk (4)

Exokernel for Health Monitoring System:

• cooperation since 2001 in development of operating system modules (software stacks) for health monitoring system,

• company’s basic production profile is designing and producing of patient monitoring systems and defibrillators,

• systems are deployed in many countries around the world - the company is ranked as the one of biggest vendor in Central and Eastern Europe,

• developed software modules and successful cooperation allowed to introduce new functionalities and to increase products competitiveness,

• vendor intends to use Phoenix-RTOS as the foundation for new generation of health monitoring systems.

Company founders – Jacek L. Madajczyk (1)

• Graduated from the Department of Mathematics and from the Department of Physics Warsaw University.

• In 1989 he completed the PhD thesis in the Center for Theoretical Physics Polish Academy of Science followed by the post doctoral fellowship at the University of Southern California (Research Associate Los Angeles 1989-1991).

• Starting from 1993 he was working for ATM (Polish distributor of Silicon Graphics Inc.) on various positions starting from Supercomputing Division Manager and completing as Strategic Projects Department Director and Plenipotentiary to the Board. He was one of the elite group of early adopters implementing supercomputing technology in Poland. His most remarkable achievement was introducing in 1995 the first supercomputer from Poland ever on the prestige list of world wide largest supercomputing installations TOP500.

• Starting from 2006 Jacek L. Madajczyk has been coordinating R&D projects within ATM. He initiated creation of the R&D center (CBR ATM-Lab) and acquired EU co-financing of more than 4 million PLN for 5 projects in total. In 2009 CBR ATM-Lab was successfully (break even point after the first year) transformed into ATM Software to commercialize the results of the above mentioned projects and to gain market share in the area of multimedia software products and services.

• In the year 2007 Jacek L. Madajczyk initiated creation of the first Special Economic Zone in Warsaw devoted to ICT innovative technologies. In 2008 he acquired more than 70 million PLN of EU co-financing for the realization of the ATM Innovation Center project in the years 2009-2014.

Company founders – Jacek L. Madajczyk (2)

ATM Innovation Center (CI ATM) project for years 2009-2014:

• total value of the project 321 326 000 PLN (more than 100 Million USD),

• total EU co-funding of the project 72 320 578 PLN (about 24 Million USD).

• CI ATM activities will include, but not be restricted to providing outsourcing services, technological support as well as support for the commercialization process of most advanced ICT technologies,

• activities will be correlated with the expansion of the existing ATMAN Telecommunication Center, the available data center floor space will be increased several times and new office building will be completed to provide space for innovative technology companies,

• new data center infrastructure will be built effectively using most advanced technologies a good example being energy saving technologies (so called Green Data Center) .

Visualizations of CI ATM according to one of the architectural concepts

Genesis

• The company's mission is to commercialize Phoenix-RTOS and implement it in a wide range of modern embedded systems,

• The Phoenix-RTOS prototype also know as Phoenix was developed between 2000 and 2001 in the Faculty of Electronics and Information Technology of Warsaw University of Technology as M. Sc. thesis by Pawel Pisarczyk,

• The first version of the system run on embedded PCs housing IA32 processors,

• Successful development of the Phoenix prototype led to the creation of the IMMOS company,

• It was one of the first embedded systems companies in Poland that focused on developing and supplying software for Automatic Dicing Saws used in the microelectronics industry as well as exo-kernel for medical devices such as cardio-monitors,

• Development of Phoenix-RTOS started in 2004 followed by the decision taken in 2009 to establish a new company with external investors to commercialize Phoenix-RTOS and implement it in a wide range of embedded devices.

Team

• Phoenix Systems is a team of dedicated, experienced and highly skilled people,

• Most of our team members are software engineers with many years of experience specialized in a wide range of embedded systems projects,

• Team of Phoenix Systems has a deep knowledge, ability to understand and solve complex challenges and attention to details,

• Some of the team members pursue an academic career, that gives them an opportunity to quickly and accurately solve sophisticated and the most demanding problems.

(1)

• Real-time operating system for embedded systems (including configurable processors) based on proprietary, reentrant, preemptive, layered kernel,

• Support for IA32, ARM, PowerPC and eSi-RISC architectures and Xtensa (?),

• Great modularity and scalability (MMU and non-MMU architectures, configurable cores),

• Processes, threads, IPC, virtual memory, resource protection, non-linear kernel memory mapping, virtual memory objects, virtual filesystem, modern object formats (ELF), POSIX API, UN*X userland tools (shells, editors etc.), proprietary operating system loader,

• TCP/IP and USB support,

• Smart Grid technologies support – dedicated stacks – PRIME (PHY, MAC, CL), DLMS/COSEM,

• Reliability enhancements (error propagation barriers, SWIFI evaluators).

(2)

(3) – shell after boot

(4) – vi editor on ttypc

(5) – list of processes - /proc/proc

Phoenix-RTOS for Smart Grid

• Support for a wide rang hardware platforms,

• Small code footprint – no extra memory cost in devices,

• Suitable for low – power devices,

• Real time to handle time – constrained tasks,

• Support of state of the art. Smart Grid standards, e.g., PRIME/G3,

• Phoenix-RTOS, Smart Grid software stacks and low-power processors will be fully integrated embedded smart grid solutions.

Configurable processors

• Automated tailoring of processor core and accompanying software tool-chain,

• Seamless integration of application-specific operations into instruction set,

• Parts of software algorithms implemented in silicon for higher performance at lower power consumption,

• Performance tuned to match application requirements.

Phoenix Systems – venture strategy

Phoenix Systems' goal is to be come a global company that supports worldwide projects.

Phoenix Systems’ main product the real-time operating system Phoenix-RTOS targets a wide range of embedded platforms including configurable processors.

The business model is based on selling licenses for Phoenix-RTOS, software stacks as well as on providing embedded software engineering services.

Phoenix-RTOS targets in particular machine-to-machine communication and smart grids devices.

• This information (including any attachments) is confidential and/or proprietary and may be legally privileged or otherwise protected. It may solely be accessed by its intended addressee. Any storage, use, copying, distribution or disclosure of this information by anyone who is not the intended recipient or is not adequately authorized is prohibited and may be unlawful.

• Treść tych informacji (łącznie z załącznikami) jest poufna i prawnie chroniona. Dostęp do informacji może mieć jedynie jej uprawniony adresat. Jakiekolwiek przechowywanie, korzystanie, zwielokrotnianie, rozpowszechnianie lub ujawnianie informacji przez osobę, która nie jest jej uprawnionym adresatem lub nie ma odpowiedniego upoważnienia, jest prawnie zabronione.