comparison of reprocessing dental hve valves vs single-use disposable hve valves
TRANSCRIPT
Standard Metal HVE Valve Reprocessing Guidelines
Remove HVE From Dental Unit (5 seconds)
Scrub the pieces with a detergent and brush the channel
(30 seconds)
Lubricate each O-ring and replace if necessary
(20 seconds)
Reassemble and test the instrument performance
(20 seconds)
Select the correct load cycle, 6 min – 20 min 132-134’ C
Disassemble the HVE Valve According to the Manufacturer
(2 minutes)
Estimate Workflow Time: Min. 9 - Minutes Per Valve
Average Cost Per Valve: Labor: $3.00 ($20/Hour)
Autoclave: Est. $1 - 1.32 Per Cycle Bags/Lube: $.10/.20 Per Cycle
$4.00+ – Per Valve Cost
Concerns: Cross Contamination Backflow of SE Valves
Performance Degrades Multiple Valves Necessary
Cannot Guarantee 100% Clean
Between Patient Metal HVE Valve Process
Single-use HVE Valve Process
Remove HVE From Dental Unit (5 seconds)
Discard into trash
$3.69 Per Valve
Estimate Workflow Time: 5 - Seconds Per Valve
Replace with New Valve