compass types in surveying

12
MUKUL NARAYAN B.Tech. in Agrl. Engg. AEC&RI TRICHY, TN mukulnarayan@gmail. com

Upload: mukul-narayan

Post on 15-Nov-2014

128 views

Category:

Documents


3 download

DESCRIPTION

Here is a ppt for u about the different types of compass used in surveying and levelling operations by the civil engineers.

TRANSCRIPT

Page 1: Compass Types in Surveying

MUKUL NARAYANB.Tech. in Agrl. Engg.

AEC&RITRICHY, TN

[email protected]

Page 2: Compass Types in Surveying

The Surveying compass can be The Surveying compass can be classified in to two types. They classified in to two types. They are:are:

(i) Prismatic Compass and(i) Prismatic Compass and(ii) Surveyors compass(ii) Surveyors compass

Various other types of compass Various other types of compass are also being used in surveying. are also being used in surveying. They are:They are:

(i) Trough compass(i) Trough compass(ii) Tubular compass(ii) Tubular compass

Surveying CompassSurveying Compass

Page 3: Compass Types in Surveying

Prismatic CompassPrismatic Compass Circular box about 100mm in

diameter.

There is a broad magnetic needle pivoted on a hard steel pivot

An aluminium ring, graduated to degrees and half degrees is attached to the needle.

The object vane carries a vertical hair of fine silk thread attached to a suitable frame.

The sight vane consists of a vertical slit cut into the upper assembly of the prism.

The object vane provided with a hinge mirror which can be raised upwards or lowered downwards, to sight the objects too high or too low.

Page 4: Compass Types in Surveying

1. Compass Box 2. Magnetic Needle 3. Graduated Ring4. Pivot 5. Objective Vane 6. Eye Vane7. Adjustable Mirror 8. Spring Brake 9. Brake Pin10. Lifting Lever 11. Lifting Pin 12. Prism13. Focusing Stud 14. Glass Cover 15. Prism Dust Cap16. Sun Glasses

Page 5: Compass Types in Surveying

Sunglasses are provided on the prism to sight luminous objects.

The two perpendicular faces of the prism are made convex, so that it also acts as a magnifier.

Breaking pin, provided at the base of the object vane is used to dampen the oscillations of the needle to facilitate the reading.

A prismatic compass reads the whole circle bearing of the lines of the objects directly.

Page 6: Compass Types in Surveying

Surveyors CompassSurveyors CompassSurveyor compass acquires its name from its extensive use by surveyors. But the prismatic compass has now replaced as it is light, compact, and handy. It is similar in construction to the prismatic compass except for a few differences as follows:

Page 7: Compass Types in Surveying

The graduated ring is attached to the circular box and not to the magnetic needle

The edge bar type magnetic needle floats freely over the pivot and is not attached to the ring. When the magnetic needle is lowered to its pivot, it will come to rest pointing north.

The eye vane consists of metal vane with a fine sight hole.

As the compass box is turned, the letters N, E, S, and W turn with it, but the needle continues to point towards the north and gives a reading which is dependant on the position of the graduated circle.

The 0o is placed at both north and south directions and 90o is marked at east and west directions.

The east and west markings are interchanged from their normal position as shown in fig to read the bearings in the proper quadrant.

Page 8: Compass Types in Surveying

Trough CompassTrough Compass

Page 9: Compass Types in Surveying

It consists of a long magnetic needle in a narrow rectangular

box.

The needle of trough compass consists of a long, narrow,

magnetized bar of steel, pointed at both ends with the usual

agate bearing at the centre.

At each end of the box is a block of metal, on which is

engraved a zero line and a very short graduated arc extending

about 5o on either side of the zero mark.

When it is used in conjunction with a plane table, the sides of

the box are used as a ruler to plot the north direction.

When fitted on a theodolite (generally attached by screws to

the side of one of the standards), it is used to align the

telescope in the meridian.

Page 10: Compass Types in Surveying

A tubular compass is an improved version of a trough compass.

A trough compass do not itself to very precise setting owing to

parallax arriving from the difficulty of ensuring that the eye is in the

vertical plane of the needle. This difficulty is overcome by the use of

a tubular compass.

In a tubular compass, the magnetic needle is contained in a tube,

at one end of which eye piece and a diaphragm carrying a glass plate

with vertical rulings is fitted. This is nearly in the same place as one

end of the needle.

The reticule being suitably illuminated by a reflector, the observer

on looking through the eyepiece sees the end of the needle without

any parallax.

Tubular CompassTubular Compass

Page 11: Compass Types in Surveying

Reference Material:-

Surveying by S.K.Duggal Surveying and Levelling by Basak www.wikipedia.com www.google.com

Page 12: Compass Types in Surveying