complete esd safe program - assets.alliedelec.com · prec. slotted/phillips 4-5 prec. torx/torxplus...

Static Dissipative

2019

PROFESSIONAL ESD SAFE TOOLS

COMPLETE ESD SAFE PROGRAM

Precision Screwdrivers • Micro Bits • Precision Bit Holders • Cushion Grip Drivers Blade Sets • Calipers • TorqueControl • Pliers & Cutters • Wire Strippers • Tweezers

For working on

static sensitive electronic

components!

2

Description Page

Drive-Loc IV Handle 7-8

Drive-Loc IV Sets 7

ESD Safe Drive-Loc IV Handles/Blades/Sets

Description Page

Prec. Slotted/Phillips 4-5

Prec. Torx/TorxPlus 5

Prec. Hex Screwdrivers 6

Prec. Nut Drivers 6

ESD Safe Precision Screwdrivers

What is ESD?

Basic Concepts in Electrostatic Discharge (ESD)We have all seen static electricity in the form of lightning or perhaps felt the zap when reaching for a door knob. Similar types of electrical charges can have an effect on the electronic components you handle every day in your work. Unfortunately, their effect is much more hazardous and not as readily apparent.

DefinitionStatic electricity is an electrical charge at rest. Static electricity is most commonly created by friction and separation. Friction causes heat which excites the molecular particles of the material. When two materials are then separated, a transfer of electrons from one material to the other may take place.

As electrons transfer, the absence or surplus of electrons creates an electrical field known as static electricity. The simple separation of two materials, as when tape is pulled off a roll, can also create this same transfer of electrons between materials, generating static electrical fields.

The amount of static electricity generated depends upon the materials subjected to friction or separation, the amount of friction or separation and the relative humidity of the environment. Common plastic generally will create the greatest static charge. Low humidity conditions such as those created when air is heated during the winter will also promote the generation of significant static electrical charges.

Materials that easily transfer electrons (or charge) between atoms are called conductors and are said to have “free” electrons. Some examples of conductors are metals, carbon and the human body’s sweat layer. Materials that do not easily transfer electrons are called insulators. Some well known insulators are common plastics, glass and air. Both conductors and insulators may become “charged” with static electricity. When a conductor is charged, the free electrons give it the ability to discharge rapidly when it comes close to another conductor with a different potential.

Typical Electrostatic VoltagesMany of the common activities you perform daily may generate charges on your body that are potentially harmful to components.

Some of these activities include: · Walking across a carpet, 1,500 to 35,000 volts · Walking over untreated vinyl floor, 250 to 12,000 volts · Worker at a bench, 700 to 6,000 volts · Vinyl envelope used for work instructions, 600 to 7,000 volts · Picking up a common plastic bag from a bench, 1,200 to 20,000 volts

Costly Effects of ESDWhen you feel a static shock, you are experiencing a minimum of 3,000 volts of electricity.

This “shock” known as Electro Static Discharge or ESD also may be responsible for damaging many of the rejected electronic components in your company.

While you can feel electrostatic discharges of 3,000 volts, smaller charges are below the threshold of human sensation. Unfortunately, smaller charges can and do damage semiconductor devices. Many of the CMOS technology components used in your facility can be damaged by charges of less than 1,000 volts. Some of the more sophisticated components can be damaged by charges as low as 10 volts. You should be aware of the relative sensitivity to ESD damage of devices you may be working with.

As electronic technology advances, electronic components tend to become smaller and smaller. As the size of the components is reduced, so is the microscopic spacing of insulators and circuits within them, increasing their sensitivity to ESD. As you can predict, the need of proper ESD protection increases everyday.

Types of ESD DamageStatic damage to components can take the form of upset failures or catastrophic failures.

· Upset failures - result in gate leakage · Catastrophic failures - occur in two forms, Direct and Latent

Direct catastrophic failures occur when a component is damaged to the point where it is DEAD NOW & it will never again function. This is the easiest type of ESD damage to find since it usually can be detected during testing.

Latent failures occur when ESD weakens or wounds the component to the point where it will still function properly during testing, but over time the wounded component will cause poor system performance and eventually complete system failure. Because latent failures occur after final inspection or in the hands of your customer, the cost for repair is very high. Not only is this type of damage hard to find, but it severely affects the reputation of your company’s product.

An upset failure occurs when an electrostatic discharge has caused a current flow that is not significant enough to cause total failure, but in use may intermittently result in gate leakage causing loss of software or incorrect storage of information.

Upset or latent failures may pass your company’s quality control testing program. In other words, static damage may occur that cannot be felt, seen, or detected through normal testing procedures.

Think of Static As Contamination!Damage caused by invisible and undetectable events can be understood by comparing ESD damage to medical contamination of the human body by viruses or bacteria. Although viruses and bacteria are invisible, they can cause severe damage even before you can detect their presence. A defense against this invisible threat is sterilization.

As an employee, the hidden threat of electrostatic discharge or ESD should be of great concern to you. ESD damage can significantly reduce your company’s profitability. This may affect your profit sharing, your company’s ability to compete in the market place and even your employment. Everyone likes to take pride in their work, but without proper ESD controls, your best efforts may be destroyed by static electricity that you can neither feel nor see.

This Article courtesy of Desco Industries, Inc

Toll Free: (800) 494-6104

3

Description Page

TorqueControl Drivers 17

TorqueControl Blades 17

ESD Safe TorqueControl Tools

Description Page

Calipers 13

ESD Safe Calipers Index

Description Page

Diagonal Cutters 18

Diagonal Cutters 18-19

Diagonal Cutters 19

Oblique Angled Cutters 19-20

End Cutters 20

Pliers 20-21

Tapered Head

Wide Tapered & Oval Head

Wide Oval & Wide Form

Carbide Edge

ESD Safe Pliers & Cutters Index

Description Page

SoftFinish® Slotted Drivers 14

SoftFinish® Phillips Drivers 14

SoftFinish® Torx® Drivers 14

ESD Safe Cushion Grip Screwdrivers

ESD Safe Drive-Loc VI Blade Sets

Description Page

Tweezers 23-25

ESD Safe Tweezers Index

Description Page

Drive-Loc VI 15-16

ESD Safe Drive-Loc VI Handle & Blades

Description Page

Micro Bits 8-12

ESD Safe Micro Bit Handles/Bits & Sets

Description Page

Micro Bit Sets 12

ESD Safe SYS 4 ESD Safe Micro Bit Sets

Description Page

Proturn Wire Strippers 21

Proturn Pliers 22

Precision Cutters/Flush Cut 22

Long, Flat, Bent, Round Nose

ESD Safe Proturn Pliers & Cutters Index

Description Page

Drive-Loc VI ESD Sets 16

21° & 45° Angle

30 to 20 AWG

Description Page

SoftFinish® Bit Holders 13

Quick Release Bit Holder 13

ESD Safe Cushion Grip Bit Holders

Handle, Blades & Set

www.wihatools.com

4

Precision ESD Safe Dissipative Screwdrivers

Slotted Screwdriver, With Precision ESD Safe Dissipative Handle Blade high alloy CVM steel. Hard chrome finished. Handle manufactured from impact resistant, dissipative material. ESD standard IEC 61340-5-1.

ItemNo. mm Inch mm Inch mm mm Inch .8 1/32 40 1.6 0.16 120 4.7 1.0 .039 40 1.6 0.18 120 4.7 1.2 3/64 40 1.6 0.20 120 4.7 1.5 1/16 40 1.6 0.25 120 4.7 1.8 5/64 40 1.6 0.30 120 4.7 2.0 5/64 40 1.6 0.40 120 4.7 2.0 5/64 75 3.0 0.40 155 6.1 2.0 5/64 100 3.9 0.40 180 7.1 2.0 5/64 150 5.9 0.40 260 10.2 2.5 3/32 50 2.0 0.40 145 5.7 2.5 3/32 100 3.9 0.40 195 7.7 2.5 3/32 150 5.9 0.40 245 9.6 3.0 1/8 50 2.0 0.50 145 5.7 3.0 1/8 100 3.9 0.50 210 8.3 3.0 1/8 150 5.9 0.50 260 10.2 3.5 9/64 60 2.4 0.60 170 6.7 3.5 9/64 100 3.9 0.60 210 8.3 3.5 9/64 150 5.9 0.60 260 10.2 4.0 5/32 60 2.4 0.80 170 6.7 4.0 5/32 100 3.9 0.80 210 8.3 4.0 5/32 150 5.9 0.80 260 10.2*Metric dimensions actual - Inch dimensions approximate

Molded Precision handleImpact resistant dissipative material

Tapered handle allows rapid rotation

Blade CVM steel, hardened, hard chrome finish

Tip Precision ground for exact fit, Wiha Chromtop finish

Rotating capFor precise turning & control with fingertip

Wiha Precision ESD Static Dissipative Screwdrivers meet the requirements for tools used in static sensitive areas

Surface resistance of handles is 106 - 109 Ohms

Set 7 Pcs. Slotted & Phillips Precision ESD Safe Dissipative Handle Blade high alloy CVM steel, hardened, hard chrome. Handle manufactured from impact resistant, dissipative material. ESD standard IEC 61340-5-1Item Slotted:No. 1.5, 2.0, 2.5, 3.5mm lbs. Phillips: .30 #00, 0, 1

Set 8 Pcs. Slotted Precision ESD Safe Dissipative Handle In storage pouch.Item Slotted:No. .8, 1.0, 1.2, 1.5, lbs. 2.0, 2.5, 3.0, 3.5mm .54

ESD Standard IEC 61340-5-1

Phillips Screwdriver, With Precision ESD Safe Dissipative Handle Blade high alloy chrome-vanadium-molybdenum steel. Hard chrome finished. Handle manufactured from impact resistant, dissipative material. ESD standard IEC 61340-5-1.ItemNo. Size mm Inch mm Inch mm Inch 000 40 1.6 2.0 .08 120 4.7 00 40 1.6 2.0 .08 120 4.7 00 75 3.0 2.0 .08 155 6.1 0 50 2.0 3.0 .12 145 5.7 0 100 3.9 3.0 .12 195 7.6 0 150 5.9 3.0 .12 245 9.6 1 60 2.3 4.0 .16 170 6.7 1 75 3.0 4.0 .16 155 6.1 1 100 3.9 4.0 .16 210 8.2 1 150 5.9 4.0 .16 260 10.2*Metric dimensions actual - Inch dimensions approximate

Set 8 Pcs. Slotted & Phillips Precision ESD Safe Dissipative Handle Blade high alloy CVM steel, hardened, hard chromed. Handle manufactured from impact resistant, dissipative material. Storage pouch. ESD standard IEC 61340-5-1.Item Slotted:No. 1.5, 2.0, 2.5, 3.0mm lbs. Phillips: .50 #000, 00, 0, 1

Set 7 Pcs. Extra Long Slotted/Phillips Precision ESD Safe Dissipative Handle Blade CVM steel, hardened, hard chromed. Handle impact resistant, dissipative material. ESD standard IEC 61340-5-1Item Slotted:No. 2.0, 2.5, 3.0, 3.5, 4.0mm lbs. Phillips: .50 #0, 1

D

D

D

D

Set 7 Pcs. Slotted & Phillips Precision ESD Safe Dissipative Handle Blade high alloy CVM steel, hardened, hard chrome. Handle manufactured from impact resistant, dissipative material. ESD standard IEC 61340-5-1Item Slotted:No. 1.5, 2.0, 2.5, 3.5mm lbs. Phillips: #00, 0, 1 .60 6.5” Long Nose Pliers W/Cutters

D

lbs. pkg..02 10.02 10.02 10.02 10.02 10.02 10.03 10.03 10.04 10.04 10.04 10.04 10.04 10.04 10.05 10.06 10.06 10.06 10.06 10.06 10.07 10

lbs. pkg..02 10.02 10.02 10.04 10.05 10.06 10.06 10.06 10.06 10.07 10

272082721027212272152721827220272222722327224272252722727228272302723227234272352723727238272402724227243

27290

272

27290

27390

27390

27302273052730727310273142731627320273222732427326

273

27399

27399

27393

27393

27398

27398

Toll Free: (800) 494-6104

5

Set 7 Pcs. Precision ESD Safe Dissipative Handle Blade high alloy CVM steel, hardened, hard chromed. Item :No. IP5, IP6, IP7, IP8 lbs. IP9, IP10, IP15 .27

ESD Safe Dissipative Precision ScrewdriversSurface resistance of handles is 106 - 109 Ohms

Master Technicians Bench Top SetMetal frame. Equipped with 50 precision ESD Safe screwdrivers.

Item Slotted: .8, 1.0, 1.2, 1.5, 2.0, 2.5, No. 3.0, 3.5, 4.0mm Phillips: #000, #00, #0, #1 : T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T15, T20lbs. Metric Hex: .7, .9, 1.3, 1.5, 2.0, 2.25 2.5, 3.0, 4.0mm Inch Hex: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32” Metric Nut Drivers: 1.5, 2.0, 2.5,

3.0, 3.5, 4.0, 4.5, 5.0, 5.5mm

27920 Chip Lifter

ESD standard

IEC 61340-5-1

Set 7 Pcs. Precision ESD Safe Dissipative Handle Blade high alloy CVM steel, hardened, hard chromed. Handle manufactured from impact resistant, dissipative material.Item :No. T4, T5, T6, T7, lbs. T8, T9, T10 .31

Set 8 Pcs. Precision ESD Safe Dissipative Handle Set In Pouch Blade high alloy CVM steel, hardened, hard chromed. Handle impact resistant, dissipative material. In storage pouch.Item :No. T1, T2, T3, T4, lbs. T5, T6, T7 .47 Chip Lifter

Screwdriver, With Precision ESD Safe Dissipative Handle Blade high alloy CVM steel. Hard chrome finished. Handle impact resistant, dissipative material. ESD standard IEC 61340-5-1.ItemNo. Size mm Inch mm Inch lbs. pkg. T1 40 1.6 120 4.7 .03 10 T2 40 1.6 120 4.7 .03 10 T3 40 1.6 120 4.7 .03 10 T4 40 1.6 120 4.7 .03 10 T5 40 1.6 120 4.7 .03 10 T6 40 1.6 120 4.7 .03 10 T7 40 1.6 120 4.7 .03 10 T8 40 1.6 120 4.7 .03 10 T9 50 2.0 145 5.7 .04 10 T10 50 2.0 145 5.7 .04 10 T15 60 2.4 170 6.7 .07 10 T20 60 2.4 170 6.7 .07 10*Metric dimensions actual - Inch dimensions approximate

ESD standard IEC 61340-5-1


D

Screwdriver, With Precision ESD Safe Dissipative Handle Blade high alloy CVM steel, hardened, hard chromed. Handle impact resistant, dissipative material. ESD standard IEC 61340-5-1.ItemNo. Size mm Inch mm Inch lbs. pkg. IP4 40 1.6 120 4.7 .03 10 IP5 40 1.6 120 4.7 .03 10 IP6 40 1.6 120 4.7 .03 10 IP7 40 1.6 120 4.7 .03 10 IP8 40 1.6 120 4.7 .03 10 IP9 50 2.0 145 5.7 .04 10 IP10 50 2.0 145 5.7 .04 10 IP15 60 2.4 170 6.7 .07 10*Metric dimensions actual - Inch dimensions approximate


Precision Chip Lifter - ESD SafeBlade CVM steel, hardened, corrosion resistant finish. Precision handle high quality plastic, Dissipative material.ItemNo. mm mm mm mm Inch lbs. pkg. 1 3.5 50 145 5.7 .07 1

Wiha Precision ESD Safe Chip Lifter


D

Smartphone ESD Safe/Standard Precision Set, 11 Piece Blade high alloy CVM steel, hardened, hard chromed. Storage pouch.

Item ESD Safe Screwdrivers:

No. Slotted: 1.5mm Phillips: #000, #00, #0 : T3, T4, T5, T6lbs. Tweezers: PSF SA ESD Long Flat Tweezers Standard Precision Screwdrivers: Pentalobe: PL1 Tri-Wing: #000

92092

92092278012780227803278042780527811278172782327829278352784127847

278

27890

27890

27899

27899

2785027851278522785327854278552785627857

278

27894

27894

27920

27920

27397

27397

www.wihatools.com

6

Hex Metric Driver, With Precision ESD Safe Dissipative Handle Blade high alloy CVM steel. Hard chrome finished. Handle manufactured from impact resistant, dissipative material. ESD standard IEC 61340-5-1.ItemNo. mm mm Inch mm Inch lbs. 0.7 40 1.6 120 4.7 .02 0.9 40 1.6 120 4.7 .02 1.3 40 1.6 120 4.7 .03 1.5 50 2.0 145 5.7 .03 2.0 50 2.0 145 5.7 .04 2.5 60 2.4 170 6.7 .05 3.0 60 2.4 170 6.7 .05 4.0 60 2.4 170 6.7 .05*Metric dimensions actual - Inch dimensions approximate

Hex Inch Driver, With Precision ESD Safe Dissipative Handle ItemNo. Inch mm Inch mm Inch 0.028 40 1.6 120 4.7 0.035 40 1.6 120 4.7 0.05 40 1.6 120 4.7 1/16 50 2.0 145 5.7 5/64 50 2.0 145 5.7 3/32 60 2.4 170 6.7 7/64 60 2.4 170 6.7 1/8 60 2.4 170 6.7 9/64 60 2.4 170 6.7 5/32 60 2.4 170 6.7*Metric dimensions actual - Inch dimensions approximate

Set 8 Pcs. Hex Inch Precision ESD Safe Dissipative Handle Blade CVM steel, hardened, hard chromed. Handle impact resistant, dissipative material. Storage pouch.Item Hex Inch:No. .050, 1/16, 5/64, 3/32, lbs. 7/64, 1/8, 9/64, 5/32” .57

Wiha Precision ESD Safe Dissipative Hex ScrewdriversESD standard IEC 61340-5-1


Metric Nut Driver, With Precision ESD Safe Dissipative Handle Blade high alloy CVM steel. Hard chromed finished. ItemNo. mm mm Inch mm Inch Inch 1.5 60 2.4 140 2.5 3.0 1.8 60 2.4 140 2.9 3.5 2.0 60 2.4 140 3.2 4.0 2.5 60 2.4 140 4.0 4.0 3.0 60 2.4 155 5.0 5.0 3.5 60 2.4 155 5.3 6.0 4.0 60 2.4 155 5.5 6.0 4.5 60 2.4 155 6.2 7.0 5.0 60 2.4 155 6.8 7.0 5.5 60 2.4 170 7.6 8.0 6.0 60 2.4 170 9.6 10.0*Metric dimensions actual - Inch dimensions approximate

Inch Nut Driver, With Precision ESD Safe Dissipative Handle Blade high alloy CVM steel. Hard chrome finished. ItemNo. Inch mm Inch Inch Inch Inch 3/32 60 2.4 6.1 .16 .16 7/64 60 2.4 6.1 .20 .20 1/8 60 2.4 6.1 .20 .20 9/64 60 2.4 6.1 .21 .24 5/32 60 2.4 6.1 .22 .24 3/16 60 2.4 6.1 .25 .28 7/32 60 2.4 6.7 .30 .32 1/4 60 2.4 6.7 .34 .36*Metric dimensions actual - Inch dimensions approximate

Set 8 Pcs. Inch Nut Driver Precision ESD Safe Dissipative Handle Blade CVM steel, hardened, hard chromed. In storage pouchItem Inch Nut Drivers:No. 3/32, 7/64, 1/8, 9/64, lbs. 5/32, 3/16, 7/32, 1/4” .68

Set 8 Pcs. Metric Nut Driver Precision ESD Safe Dissipative Handle Blade CVM steel, hardened, hard chromed.Item Metric Nut Drivers:No. 1.5, 2.0, 2.5, 3.0, lbs. 3.5, 4.0, 5.0, 5.5mm .63


Set 8 Pcs. Hex Metric Precision ESD Safe Dissipative Handle Blade CVM steel, hardened, hard chromed. Handle impact resistant, dissipative material. Item Hex Metric:No. .7, .9, 1.3, 1.5, lbs. 2.0, 2.5, 3.0, 4.0mm .53




Wiha Precision ESD Safe Dissipative Nut Drivers



Storage Pouch

lbs. pkg..02 10.02 10.02 10.03 10.03 10.04 10.04 10.04 10.05 10.05 10

lbs. pkg..04 10.05 10.05 10.05 10.05 10.05 10.06 10.06 10

lbs. pkg..03 10.03 10.04 10.05 10.06 10.06 10.06 10.06 10.06 10.07 10.07 10

pkg.1010101010101010

27590

275 Metric

2750727509275132751527520275252753027535

275 Inch

27505275102751327537275392754127543275452754727549

27590

27591

27591

277

2770127703277052770727709277112771327715

277

2772027721277222772527730277352774027745277502775527760

27791

27791

27790

27790

Toll Free: (800) 494-6104

7

Wiha SYSTEM 4 Drive-Loc Precision Locking Tools

ESD Safe Dissipative Precision Drive-Loc Handle Surface resistant 106-109 Ohms. 4 mm hex retainer for all SYSTEM 4 interchangeable blades. Ball retainer hold. 105mm/4.13” OALItem No. mm Inch mm Inch lbs. 4.0 .1574 23 .91 .08

D

SYSTEM 4 Slotted Drive-Loc Reversible Locking Blades On 4mm Hex ItemNo. mm mm lbs. 1.5 + 3.0 .02 2.0 + 3.5 .02 2.5 + 4.0 .02

SYSTEM 4 Drive-Loc Reversible Locking Blades On 4mm Hex ItemNo. Size Size lbs. T1 + T2 .02 T3 + T4 .02 T5 + T6 .02 T6 + T8 .02 T7 + T9 .02 T10 + T15 .02 T15 + T20 .02

SYSTEM 4 Phillips Drive-Loc Reversible Locking Blades On 4mm Hex ItemNo. Size Size lbs. 000 + 00 .02 0 + 1 .02

SYSTEM 4 Pozidriv® Drive-LocReversible Locking Blades On 4mm HexItemNo. Size Size lbs. 0 + 1 .02

12 Piece SYSTEM 4 Precision ESD Drive-Loc Set In storage pouchItem No. ESD Safe Drive-Loc Handle Slotted: 1.5x3.0, 2.0x3.5, 2.5x4.0 lbs. .44 Phillips: 000x00, 0x1 : T1xT2, T3xT4, T5xT6, T6xT8, T7xT9, T10xT15

SYSTEM 4 Metric Hex Drive-Loc Reversible Locking Blades On 4mm Hex bladesItemNo. mm mm lbs. 1.3 + 1.3 .02 1.5 + 1.5 .02 2.0 + 2.0 .02 2.5 + 2.5 .02 3.0 + 3.0 .02 4.0 + 4.0 .02

SYSTEM 4 Metric Nut Drivers Drive-Loc Reversible Locking Blades On 4mm Hex bladesItemNo. mm mm lbs. 1.5 + 1.8 .02 2.0 + 2.5 .02 3.0 + 3.0 .02 3.2 + 3.2 .02 3.5 + 3.5 .02 4.0 + 4.0 .02 4.5 + 4.5 .02 5.0 + 5.0 .02 5.5 + 5.5 .02

9 Piece ESD Safe Drive-Loc IV Precision Blade Set In storage pouchItem No. ESD Safe Drive-Loc IV Handle Slotted: 1.5x3.0, 2.0x3.5, 2.5x4.0 lbs. Phillips: 000x00, 0x1.47 : T6xT8, T7xT9, T10xT15

12 Piece ESD Safe Drive-Loc IV Precision Blade Set In storage pouchItem No. ESD Safe Drive-Loc IV Handle Slotted: 2.0x3.5, 2.5x4.0 lbs. Phillips: 000x00, 0x1.59 : T6xT8, T7xT9, T10xT15 AA SA Fine Point Tweezers 5 SA Extra Fine Point Tweezers 2a SA Flat & Blunt Tweezers 7a SA Curved & Fine Point Tweezers

Rugged Polyester Canvas Storage Pouch Holds 8 Precision Tools up to 170mm in length. Folding pouch. Has security flaps and velcro closer. ItemNo. Size lbs. pkg. 14-1/2” W x 7-3/4” L .13 1

Wiha Canvas Pouch

26961

26961

269

269582695926960

269

2697526976

269

26977269782697926980269812698226983

28002

28002

26985

26985

280

280032800428005280062800728008

280

280092801028011280122801328014280152801628017

26994

26994

26970

26970

91118

91118

www.wihatools.com

8

Wiha SYSTEM 4 Precision Bit Handle

Micro Bit 1/4” Drive Power Tool Adapter Shaft CVM steel, hardened, corrosion protected. For 4mm bits. 2.3” OALItemNo. Size mm mm lbs. 4.0 60 4.0 .07

Micro Bit 1/4” Drive Power Tool Adapter

Extension Blade For SYS 4 Micro Bits Shaft CVM steel, hardened, corrosion protected. Ball retainer bit extension for 4mm bits.ItemNo. Size mm mm lbs. 4.0 100 4.0 .07

Magnetic Bit Extension Blade For SYS 4 Micro Bits Shaft CVM steel, hardened, corrosion protected. Magnetic bit holder.ItemNo. Size mm mm lbs. 4.0 100 4.0 .04

SYSTEM 4 Micro Bit Extension Blades

D

SYSTEM 4 ESD Safe Dissipative Precision Bit Handle 110mm/4.3” OAL Advantages:• For working in ESD sensitive applications Surface resistant 106-109 Ohms • Ball retainer holds bits securely in place• Accepts all SYSTEM 4 Series bits ItemNo. mm Inch mm Inch lbs. 4.0 .1574 14.0 .55 .06

SYSTEM 4 Hex Inch Micro Bit Replacement Pack, 10 Pcs. CVM steel, hardened, on 4 mm hex stock. Item No. SYSTEM 4 Micro Bit Set Hex Inch: .028, .035, .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32” lbs. .06

Wiha SYS 4 Micro Bit Packs

SYSTEM 4 Slotted Micro Bit Replacement Pack, 10 Pcs. CVM steel, hardened, on 4 mm hex stock. Item No. SYSTEM 4 Micro Bit Set Slotted: 0.8, 1.2, 1.5, 1.8, 2.0, 2.5, 3.0, 3.5, 4.0mm lbs. .06

SYSTEM 4 Phillips & Pentalobe Micro Bit Replacement Pack, 10 Pcs. CVM steel, hardened, on 4 mm hex stock. Item No. SYSTEM 4 Micro Bit Set Phillips: #000, 00, 0, 1 Pentalobe: PL1, PL2, PL3, PL4, PL5, PL6 lbs. .06

SYSTEM 4 Slotted & Phillips Micro Bit Replacement Pack, 10 Pcs. CVM steel, hardened, on 4 mm hex stock. Item No. SYSTEM 4 Micro Bit Set Slotted: 1.5, 2.0, 2.5, 3.0, 3.5mm Phillips: #000, 00, 0, 1 lbs. .06

SYSTEM 4 Micro Bit Replacement Pack, 10 Pcs. CVM steel, hardened, on 4 mm hex stock. Item No. SYSTEM 4 Micro Bit Set : T1, T2, T3, T4, T5, T6, T7, T8, T9, T10 lbs. .06

ESD Safe Dissipative Precision Handle with rotating control cap. Surface resistant 106-109 Ohms. 4 mm hex retainer for all SYSTEM 4 interchangeable blades. Tapered handle, high quality plastic, impact resistant. Ball retainer hold. 110mm/4.3” OALItemNo. mm Inch mm Inch lbs. 4.0 .1574 14.0 .55 .04

SYSTEM 4 Phillips Reversible Blade ItemNo. Size Size mm Inch lbs. 000 + 00 120 4.7 .03 0 + 1 120 4.7 .03

Wiha SYSTEM 4 Precision Blade Handle

SYSTEM 4 Combined Slotted/Phillips Reversible Blade ItemNo. mm Size mm Inch lbs. 1.5 + 000 120 4.7 .05 2.0 + 00 120 4.7 .05 3.0 + 0 120 4.7 .05 4.0 + 1 120 4.7 .06

SYSTEM 4 Slotted Reversible Blade High alloy CVM steel, hardened, hard chromed. Wiha vapor Chrome-Top finish on tips.ItemNo. mm mm mm Inch lbs. 1.5 + 3.0 120 4.7 .05 2.0 + 3.5 120 4.7 .05 2.5 + 4.0 120 4.7 .06

SYSTEM 4 Pozidriv® Reversible Blade High alloy CVM steel, hardened, hard chromed. Wiha vapor Chrome-Top finish on tips.ItemNo. Size Size mm Inch lbs. 0 + 1 120 4.7 .03

75801

75900

75901

75902

75801

75900

75901

75902

75982

75984

75982

75984

75986

75986

75987

75987

75988

75988

28000

28000

269

269032690426905

269

26971269722697326974

269

2691126912

26922

26922

Toll Free: (800) 494-6104

9

Wiha SYSTEM 4 Micro Bits - 10 Bit Packs

SYSTEM 4 Metric Nut Setters Item No.Metric mm mm Inch lbs. 2.0 30 1.2 .07 2.5 30 1.2 .07 3.0 30 1.2 .07 3.5 30 1.2 .07 4.0 30 1.2 .08 4.5 30 1.2 .08 5.0 30 1.2 .08 5.5 30 1.2 .09

SYSTEM 4 Pentalobe Micro BitsItemNo. Size mm Inch lbs. PL1 28 1.1 .06 PL2 28 1.1 .06 PL3 28 1.1 .07 PL4 28 1.1 .07 PL5 28 1.1 .07 PL6 28 1.1 .08

SYSTEM 4 Inch Nut Setters Item No.Inch mm mm Inch lbs. 5/64 30 1.2 .07 3/32 30 1.2 .07 7/64 30 1.2 .07 1/8 30 1.2 .07 9/64 30 1.2 .08 5/32 30 1.2 .08 3/16 30 1.2 .08 7/32 30 1.2 .09

10 Bit Pack

Use bits directly in handle or with 4” bit extension

Bits High alloy CVM steel, hardenedTips Exact fit,

precision machined

Micro Bits Made in Germany

SYSTEM 4 Slotted Micro BitsItemNo. mm mm Inch lbs. 0.8 28 1.1 .06 1.2 28 1.1 .06 1.5 28 1.1 .06 1.8 28 1.1 .06 2.0 28 1.1 .07 2.5 28 1.1 .07 3.0 28 1.1 .07 3.5 28 1.1 .07 4.0 28 1.1 .08

10 Bit Pack

10 Bit Pack

SYSTEM 4 Phillips Micro BitsItemNo. Size mm Inch lbs. 000 28 1.1 .06 00 28 1.1 .06 0 28 1.1 .06 1 28 1.1 .07 2 28 1.1 .07

SYSTEM 4 Hex Metric Micro Bits ItemNo. mm mm Inch lbs. .7 28 1.1 .06 .9 28 1.1 .06 1.3 28 1.1 .06 1.5 28 1.1 .07 2.0 28 1.1 .07 2.5 28 1.1 .07 3.0 28 1.1 .08 4.0 28 1.1 .08

SYSTEM 4 Hex Inch Micro Bits ItemNo. Inch mm Inch lbs. .028 28 1.1 .06 .035 28 1.1 .06 .050 28 1.1 .06 1/16 28 1.1 .06 5/64 28 1.1 .06 3/32 28 1.1 .07 7/64 28 1.1 .07 1/8 28 1.1 .07 9/64 28 1.1 .08 5/32 28 1.1 .08

10 Bit Pack

10 Bit Pack

SYS 4 Security Micro Bits ItemNo. Size mm Inch lbs. T10s 28 1.1 .07 T20s 28 1.1 .08

SYS 4 Metric Security Hex Micro Bits ItemNo. mm mm Inch lbs. 2.0 28 1.1 .06 3.0 28 1.1 .07 4.0 28 1.1 .08

SYS 4 Security Hex Inch Micro Bits ItemNo. Inch mm Inch lbs. 5/64 28 1.1 .06 3/32 28 1.1 .06 7/64 28 1.1 .07 1/8 28 1.1 .07 9/64 28 1.1 .08 5/32 28 1.1 .08

10 Bit Pack

10 Bit Pack

10 Bit Pack

10 Bit Pack

SYSTEM 4 Micro BitsItemNo. Size mm Inch lbs. T1 28 1.1 .06 T2 28 1.1 .06 T3 28 1.1 .06 T4 28 1.1 .06 T5 28 1.1 .06 T6 28 1.1 .06 T7 28 1.1 .06 T8 28 1.1 .07 T9 28 1.1 .07 T10 28 1.1 .07 T15 28 1.1 .08 T20 28 1.1 .08

CVM steel, hardened, on 4 mm hex stock.

10 Bit Pack

10 Bit Pack

756

756027560375604756057560675607756087560975610

7561175612756137561475615

756727567375674756757567675677

7561675617756187561975620756217562275623

75628756297563075631756327563375634756357563675637

756247562675627

756387563975640756417564275643

7565275653756547565575656756577565875659

7564475645756467564775648756497565075651

7568175683

756607566175662756637566475665756667566775668756697567075671

756

756

756

756

756756

756

756 756

756

www.wihatools.com

10

SYSTEM 4 Slotted Bits High alloy CVM steel, hardened, on 4 mm hex stock.ItemNo. mm mm Inch lbs. 0.8 28 1.1 .01 1.2 28 1.1 .01 1.5 28 1.1 .01 1.8 28 1.1 .01 2.0 28 1.1 .01 2.5 28 1.1 .01 3.0 28 1.1 .01 3.5 28 1.1 .01 4.0 28 1.1 .01

SYSTEM 4 Phillips BitsHigh alloy chrome-vanadium-molybdenum steel, hardened, on 4 mm hex stock.ItemNo. Size mm Inch lbs. 000 28 1.1 .01 00 28 1.1 .01 0 28 1.1 .01 1 28 1.1 .01 2 28 1.1 .01

SYSTEM 4 Hex Metric Bits High alloy CVM steel, hardened, on 4 mm hex stock.ItemNo. mm mm Inch lbs. .7 28 1.1 .01 .9 28 1.1 .01 1.3 28 1.1 .01 1.5 28 1.1 .01 2.0 28 1.1 .01 2.5 28 1.1 .01 3.0 28 1.1 .01 4.0 28 1.1 .01

SYSTEM 4 Hex Inch Bits High alloy CVM steel, hardened, on 4 mm hex stock.ItemNo. Inch mm Inch lbs. .028 28 1.1 .01 .035 28 1.1 .01 .050 28 1.1 .01 1/16 28 1.1 .01 5/64 28 1.1 .01 3/32 28 1.1 .01 7/64 28 1.1 .01 1/8 28 1.1 .01 9/64 28 1.1 .01 5/32 28 1.1 .01

SYSTEM 4 BitsHigh alloy chrome-vanadium-molybdenum steel, hardened, on 4 mm stock.ItemNo. Size mm Inch lbs. T1 28 1.1 .01 T2 28 1.1 .01 T3 28 1.1 .01 T4 28 1.1 .01 T5 28 1.1 .01 T6 28 1.1 .01 T7 28 1.1 .01 T8 28 1.1 .01 T9 28 1.1 .01 T10 28 1.1 .01 T15 28 1.1 .01 T20 28 1.1 .01

SYSTEM 4 Security Bits High alloy CVM steel, hardened, on 4 mm stock.ItemNo. Size mm Inch lbs. T10s 28 1.1 .01 T20s 28 1.1 .01

SYSTEM 4 Metric Security Hex Bits High alloy CVM steel, hardened, on 4 mm hex stock.ItemNo. mm mm Inch lbs. 2.0 28 1.1 .01 3.0 28 1.1 .01 4.0 28 1.1 .01

SYSTEM 4 Security Hex Inch Bits High alloy CVM steel, hardened, on 4 mm hex stock.ItemNo. Inch mm Inch lbs. 5/64 28 1.1 .01 3/32 28 1.1 .01 7/64 28 1.1 .01 1/8 28 1.1 .01 9/64 28 1.1 .01 5/32 28 1.1 .01

Use bits directly in handle or with 4” bit extension

Bits CVM steel, hardened

SYSTEM 4 Handles & Micro Bits

Tapered Handleallows rapid rotation,requires less clearance. Static Dissipative 106 - 109 ohms

Rotating Capfor precise turning & control

TipsExact fit,precision machined

SYSTEM 4 Pentalobe Micro Bits CVM steel, hardened, on 4 mm hex stock.ItemNo. Size mm Inch lbs. PL1 28 1.1 .01 PL2 28 1.1 .01 PL3 28 1.1 .01 PL4 28 1.1 .01 PL5 28 1.1 .01 PL6 28 1.1 .01

SYSTEM 4 Metric & Inch Nut Setters CVM steel, hardened, on 4 mm hex stock.Item No.Metric mm mm Inch lbs. 2.0 30 1.2 .01 2.5 30 1.2 .01 3.0 30 1.2 .01 3.5 30 1.2 .01 4.0 30 1.2 .01 4.5 30 1.2 .01 5.0 30 1.2 .01 5.5 30 1.2 .01Inch Inch mm Inch lbs. 5/64 30 1.2 .01 3/32 30 1.2 .01 7/64 30 1.2 .01 1/8 30 1.2 .01 9/64 30 1.2 .01 5/32 30 1.2 .01 3/16 30 1.2 .01 7/32 30 1.2 .01

750

750087501275015750187502075025750307503575040

751

7510575110751157512075125

753

7530775309753137531575320753257533075340

753

75307753097531375350753527535475356753587536075340

757

757017570275703757047570575706757077570875709757107571575720

753

753227533275342

753

753627536475366753687537075372

753

7573575742

757

757437574475745757467574775748

758

7582075821758227582375824758257582675827

7581075811758127581375814758157581675817

Toll Free: (800) 494-6104

11

D

Wiha SYSTEM 4 ESD Safe Compact Micro Bit Sets

SYSTEM 4 Master Tech Micro Bit Set, 68 Pcs. Includes Wiha ESD Safe Precision Handle, Micro Bit Storage Handle, 1/4” to 4mm Adapter, 100mm Bit Extension & 64 Micro Bits. Item No. SYSTEM 4 Micro Bit Set Includes: Slotted: 0.8, 1.2, 1.5, lbs. 1.8, 2.0, 2.5, 3.0, 3.5, 4.0mm.70 Phillips: 000, 00, 0, 1, 2 : T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T15, T20 Hex Metric: 1.3, 1.5, 2.0, 2.5, 3.0, 4.0mm Hex Inch: .028, .035, .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32” Pentalobe: PL1, PL2, PL3, PL4, PL5, PL6 Nut Driver Metric: 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5mm Nut Driver Inch: 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32”

D

IncludesDust Cover

SYSTEM 4 Master Tech Micro Bit Set, 68 Pcs. Includes Wiha ESD Safe Precision Handle, Micro Bit Storage Handle, 1/4” to 4mm Adapter, 100mm Bit Extension & 64 Micro Bits. Item No. SYSTEM 4 Micro Bit Set Includes: Slotted: 0.8, 1.2, 1.5, lbs. 1.8, 2.0, 2.5, 3.0, 3.5, 4.0mm.96 Phillips: 000, 00, 0, 1, 2 : T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T15, T20 Hex Metric: 1.3, 1.5, 2.0, 2.5, 3.0, 4.0mm Hex Inch: .028, .035, .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32” Pentalobe: PL1, PL2, PL3, PL4, PL5, PL6 Nut Driver Metric: 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5mm Nut Driver Inch: 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32”

D

In Zipper Storage Case

SYSTEM 4 Interchangeable Bit Set, 40 Pcs. Includes Wiha precision handle, bit extension & 38 interchangeable bits. Item SYSTEM 4 No. Combination Bit Set Set with ESD Safe Precision Handle Set includes the following bits:lbs. Slotted: 0.8, 1.2, 1.5, 1.04 1.8, 2.0, 2.5, 3.0, 3.5, 4.0mm Phillips: 000, 00, 0, 1 : T3, T4, T5, T6, T7, T8, T9, T10, T15 Hex Metric: 1.3, 1.5, 2.0, 2.5, 3.0, 4.0mm Hex Inch: .028, .035, .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32” 100mm Bit Extension

40 Pc. Set

In Metal Storage Box Wiha SYSTEM 4 Compact

Micro Bit Sets

SYS 4 Precision Interchangeable Bit Set, 26 Pcs. In Compact Fold Out Box Sets includes Wiha precision handle, bit extension & 24 Wiha interchangeable bits. Item SYSTEM 4 Micro Bit SetNo. Set with ESD Safe Precision Handle and the following bits: : T1, T2, T3, T4, T5, T6, T7, T8, T9, T10 Pentalobe: PL1, PL2, PL3, PL4, PL5, PL6 Slotted: 1.5, 2.0, 2.5, 3.0mm Phillips: #000, 00, 0, 1 100mm Bit Extension lbs. .54

26 Pc. Set

D

SYSTEM 4 Master Tech Micro Bit Set, 68 Pcs. Includes Wiha ESD Safe Precision Handle, ESD Safe Tweezers, 1/4” to 4mm Adapter, 100mm Bit Extension & 64 Micro Bits. Item No. SYSTEM 4 Micro Bit Set Includes The Following Bits: Slotted: 0.8, 1.2, 1.5, lbs. 1.8, 2.0, 2.5, 3.0, 3.5, 4.0mm1.00 Phillips: 000, 00, 0, 1, 2 : T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T15, T20 Hex Metric: 1.3, 1.5, 2.0, 2.5, 3.0, 4.0mm Hex Inch: .028, .035, .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32” PL1, PL2, PL3, PL4, PL5, PL6 Nut Driver Metric: 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5mm Nut Driver Inch: 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32” ESD Fine Round Point Tweezers 3cSA

D

In Zipper Storage Case

SYSTEM 4 Mini Metal Box Micro Bit Set, 39 Pcs. Includes Wiha ESD Safe Precision Handle, 1/4” to 4mm Adapter, 100mm Bit Extension & 36 Micro Bits. Item No. SYSTEM 4 Micro Bit Set Includes: Slotted: 0.8, 1.2, 1.5, lbs. 1.8, 2.0, 2.5, 3.0, 3.5, 4.0mm.40 Phillips: 000, 00, 0, 1, 2 : T1, T2, T3, T4, T5, T6, T7, T8, T9, T10 Hex Metric: 1.3, 1.5, 2.0, 2.5, 3.0, 4.0mm Pentalobe: PL1, PL2, PL3, PL4, PL5, PL6

75996

75968

75971

75996

75971

75968

75995

75995

75977

75977

75980

75980

www.wihatools.com

12

SYSTEM 4 Slotted/Phillips/Hex Inch/ Precision Interchangeable Bit Set, 27 Pcs. In Compact Fold Out Box. Sets include your choice of Wiha precision handle, bit extension & 25 Wiha interchangeable bits. Item Handle Options for SYSTEM 4 No. Combination Bit Sets Set with Standard Precision Handle Set with ESD Safe Precision Handle Sets include the following bits: Slotted: 1.5, 2.0, 3.0, 4.0mm Phillips: 000, 00, 0, 1 : T3, T4, T5, T6, T7, T8, T9, T10, T15 Hex Inch: .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32” 100mm Bit Extension lbs. .64

27 Pc. Set

SYSTEM 4 Slotted/Phillips/Hex Metric/ Precision Interchangeable Bit Set, 27 Pcs. In Compact Fold Out Box. Set includes Wiha precision handle, bit extension and 25 Wiha interchangeable bits. Item SYSTEM 4 No. Combination Bit Set Set with ESD Safe Precision Handle Set includes the following bits: Slotted: 1.5, 2.0, 3.0, 4.0mm Phillips: 000, 00, 0, 1 : T3, T4, T5, T6, T7, T8, T9, T10, T15 Hex Metric: .7, .9, 1.3, 1.5, 2.0, 2.5, 3.0, 4.0mm 100mm Bit Extension lbs. .64

27 Pc. Set

D

SYS 4 Slotted, Phillips, Hex Inch Compact ESD Precision InterchangeableBit Set, 16 Pcs. Wiha precision handle, bit extension & 14 interchangeable bits. Item No. Combination Bit Set Set with ESD Safe Precision Handle Slotted: 1.5, 2.0, 2.5, 3.0mm Phillips: 00, 0, 1 Hex Inch: .035, .050, 1/16, 5/64, lbs. 3/32, 7/64, 1/8”.17 100mm Bit Extension

SYSTEM 4 Slotted, Phillips, Compact ESD Precision Interchangeable Bit Set, 16 Pcs. Wiha precision handle, bit extension & 14 interchangeable bits. Item No. Combination Bit Set Set with ESD Safe Precision Handle Slotted: 1.5, 2.0, 2.5, 3.0mm Phillips: 00, 0, 1lbs. : T6, T7, T8, T9, T10, T15, T20 .17 100mm Bit Extension

SYS 4 Slotted, Phillips, Hex Metric Compact ESD Precision Interchangeable Bit Set, 16 Pcs. Wiha precision handle, bit extension & 14 interchangeable bits. Item No. Combination Bit Set Set with ESD Safe Precision Handle Slotted: 1.5, 2.0, 2.5, 3.0mm Phillips: 00, 0, 1 Hex Metric: .9, 1.3, 1.5, 2.0,lbs. 2.5, 3.0, 4.0mm .17 100mm Bit Extension

Bits hardened for extreme durability

Handle tapered for precise control

Light weight & compact

Technician’s MicroBit Sets• Micro Precision Bits on 4mm Hex Drive • Bits of Exclusive CRM-72 Tool Steel• Handle uses non-magnetic ball retainer• Use bits in extension only• Standard extension adds 4” to length• Non-magnetic bit extension

Rotation cap


SYSTEM 4 Hex Inch & Metric Compact ESD Precision Interchangeable Bit Set, 16 Pcs. Wiha precision handle, bit extension & 14 interchangeable bits. Item No. Combination Bit Set Set with ESD Safe Precision Handle Hex Inch: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32” Hex Metric: .9, 1.3, 1.5, 2.0, lbs. 2.5, 3.0, 4.0mm .17 100mm Bit Extension

D

SYS 4 Slotted, Phillips & 5Point Compact ESD Precision InterchangeableBit Set, 16 Pcs. Wiha precision handle, bit extension & 14 interchangeable bits. Item No. Combination Bit Set Set with ESD Safe Precision Handle Slotted: 1.2, 1.5, 2.0, 2.5, 3.0mm Phillips: 000, 00, 0, 1, 2lbs. Pentalobe: PL1, PL2, PL3, PL4.17 100mm Bit Extension

Wiha SYSTEM 4 Compact Micro Bit Set

75093

75094

75095

75096

75097

759

7599175992

75994

75994 75093 75096

7509475097

75095

Toll Free: (800) 494-6104

13


ESD Safe Stubby 1/4” Bit Holder With Ring Retainer, Wiha-SoftFinish® Cushion Grip Handle, IEC 61340-5-1, DIN 3126, ISO 1173 Dissipative SoftFinish® cushion grip handle, multi-component, ESD Safe surface resistance 106 - 109 Ohm.

ItemNo. Inch mm Inch lbs. pkg. 1/4” 57 2.2 .11 1

ESD Safe Quick Release 1/4” Bit Holder, With Wiha-SoftFinish® Cushion Grip Handle, IEC 61340-5-1, DIN 3126, ISO 1173 Stainless steel with retaining ring bit holder. Dissipative SoftFinish® cushion grip handle, multi-component, ESD Safe surface resistance 106 - 109 Ohm.ItemNo. Inch mm Inch mm Inch lbs. pkg. 1/4” 148 5.8 38 1.5 .24 1


For working on staticsensitive components

Dissipative material offers protection against electrostatic discharge

ESD Safe 1/4” Quick Release Blade Holder Set 20 Pc. Set With Interchangeable Blades & Quick Release Blade Holder ExtensionBlades are CVM tool steel, hardened.

Item No. lbs. .67Slotted: 2.5, 3.0, 3.5, 4.0, 5.5, 6.5mm Phillips: 0, 1, 2 TORX®: T6, T7, T8, T9, T10, T15 Pozidriv®: 0, 1, 2

In Durable Pouch

Surfaceresistance of handle is 106 - 109 Ohms

Bit holders without magnetics

D

D

D

D

ESD Safe

For working in sensitive electronic components

Conductive, Anti-static, Dissipative

ESD StandardIEC 61340-5-1

Item No. Reading mm Inch Pkg. wt. .001” 150 6 Inch 1 .10 0.1mm 150 6 Metric 1 .10

ESD Safe Dial Caliper DialMax - Metric & Inch Non-metallic high-tech material with 60% fiber glass content. For outside, inside, depth & step measurements. Impact resistant dial can be recalibrated to zero.

ESD Safe Dial Caliper DialMax Metric & Inch

Precision ratchet guarantees uniform clamping force of the measuring jaw

Won’t damage sensitive parts

Non-metallic high-tech material with 60% fiber glass content, extremely high rigidity.

Non-corrosive, non-magnetic,

hardly conductive & electrically insulated

Thermal stability of the measuring surfaces: Short-term up to 180OC, continuous 100-120OC

Inside Outside

Depth Step

Made in Switzerland

Surface resistance of handle is 106 - 109 Ohms

D

SYSTEM 4 Master Tech ESD & Ratchet With Micro Bits, 65 Pieces In Storage Box. Includes Wiha precision ESD Safe handle, micro bit extension, 72 tooth 1/4” ratchet & 62 interchangeable micro bits. Item Includes:No. Slotted: 0.8, 1.2, 1.5, 1.8, 2.0, 2.5, 3.0, 3.5, 4.0mm Phillips: 000, 00, 0, 1lbs. : T3, T4, T5, T6, T7, T8, 1.16 T9, T10, T15, T20 Hex Metric: .7, .9, 1.3, 1.5, 2.0, 2.5, 3.0, 4.0mm Hex Inch: .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32” Nut Drivers Metric: 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5mm Nut Drivers Inch: 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32” Pentalobe: PL1, PL2, PL3, PL4, PL5, PL6 Magnetic 1/4” to 4mm Adapter

D


38701

38790

28180

38790

38701

28180

411

4110541106

75965

75965

www.wihatools.com

14

DIN EN 61340-5-1/ 61340-5-2

SoftFinish cushion grip handle

CVM steel hardened, hard chrome Finish

For working on staticsensitive components

Dissipative materialoffers protection against electrostatic discharge

Wiha ESD Safe SoftFinish Cushion Grip Screwdrivers

ESD Safe Slotted Screwdrivers, With Wiha-SoftFinish® Handle DIN EN 61340-5-1/61340-5-2 Round blade, high alloy CVM steel, hardened, hard chromed. Offers protection against electrostatic discharge. Dissipative SoftFinish® cushion grip handle, multi-component, ESD Safe (106-109 Ohm).

ItemNo. mm Inch mm Inch mm Inch mm Inch lbs. pkg. 2.5 .098 75 3.0 0.4 .016 175 7.0 .06 10 3.0 .118 100 3.9 0.5 .020 204 8.0 .06 10 4.0 .157 100 3.9 0.8 .031 211 8.3 .11 10 5.5 .216 125 5.0 1.0 .039 236 9.3 .15 10 6.5 .255 150 5.9 1.2 .047 268 10.6 .22 10 *Cabinet Tips

ESD Safe Phillips Screwdriver, With Wiha-SoftFinish® HandleDIN EN 61340-5-1/61340-5-2 Round blade, high alloy CVM steel, hardened, hard chromed. Offers protection against electrostatic discharge. Dissipative SoftFinish® cushion grip handle, multi-component, ESD Safe (106-109 Ohm).

ItemNo. Size mm Inch mm Inch mm Inch lbs. pkg. 0 60 2.4 3.0 1/8 164 6.5 .06 10 1 80 3.1 4.5 3/16 191 7.5 .11 10 2 100 3.9 6.0 1/4 218 8.6 .20 10

ESD Safe Screwdriver, With Wiha-SoftFinish® HandleDIN EN 61340-5-1/61340-5-2 Round blade, high alloy CVM steel, hardened, hard chromed. Offers protection against electrostatic discharge. Dissipative SoftFinish® cushion grip handle, multi-component, ESD Safe (106-109 Ohm).ItemNo. Size mm Inch mm Inch mm Inch lbs. pkg. T3 60 2.4 3.5 .139 164 6.5 .06 10 T4 60 2.4 3.5 .139 164 6.5 .06 10 T5 60 2.4 3.5 .139 164 6.5 .06 10 T6 60 2.4 3.5 .139 164 6.5 .06 10 T8 60 2.4 3.5 .139 164 6.5 .06 10 T9 60 2.4 4.0 .157 171 6.7 .10 10 T10 80 3.1 4.0 .157 191 7.5 .11 10 T15 80 3.1 4.0 .157 191 7.5 .11 10 T20 100 3.9 4.0 .157 211 8.3 .11 10

Set 6 Pcs. ESD Safe Slotted & Phillips DIN EN 61340-5-1/61340-5-2 Round blade, high alloy CVM steel, hardened, hard chromed. Dissipative SoftFinish® cushion grip handle, multi-component, ESD Safe (106-109 Ohm).Item Slotted:No. *3.0, *4.0, *5.5mm lbs. Phillips: 0, 1, 2 .96*Cabinet Tips

Set 6 Pcs. ESD Safe Screwdrivers Round blade high alloy CVM steel, hardened, Hard chrome finish with Wiha-Chromtop satin grip tips. Molded on SoftFinish® cushion grip handle, multi-component.ItemNo. T6, T8, T9, lbs. T10, T15, T20 .81

D

D

ESD Safe

D

Wiha ESD Safe SoftFinish®

302

30240*30242*30244*30246*30248

311

311503115131152

30292

30292

362

362603620436200362063620836209362183621936224

36289

36289

Toll Free: (800) 494-6104

15

ESD Safe Drive-Loc VI Cushion Grip Handle Wiha-SoftFinish® impact resis-tant, with roll off protection. Advantages:

Ergonomic cushion grip, Drive-Loc mechanism guarantees a secure hold and rapid blade exchange. Static Dissipative.ItemNo. mm mm Inch mm Inch lbs. 6.0 115 4.5 36.0 1.41 .21

D

Slotted Drive-Loc VI Interchangeable Blade High alloy CVM steel, through hardened, hard chrome finish. OAL 150mm/5.9”. Blades fit all Drive-Loc VI handles.ItemNo. mm + mm lbs. pkg. 3.5 4.5 .10 1 5.5 6.5 .10 1

Slotted & Phillips Drive-Loc VI Interchangeable Blade High alloy CVM steel, through hardened, hard chrome finish. OAL 150mm/5.9”. Blades fit all Drive-Loc VI handles.ItemNo. mm + Size lbs. pkg. 3.0 0 .10 1 4.0 1 .10 1 6.0 2 .10 1

Phillips Drive-Loc VI Interchangeable Blade High alloy CVM steel, through hardened, hard chrome finish. OAL 150mm/5.9”. Blades fit all Drive-Loc VI handles.ItemNo. Size + Size lbs. pkg. 1 2 .10 1

Square Drive-Loc VI Interchangeable Blade High alloy CVM steel, through hardened, hard chrome finish. OAL 150mm/5.9”. Blades fit all Drive-Loc VI handles.ItemNo. Size + Size lbs. pkg. 1 2 .10 1

Tri-wing® Drive-Loc VI Interchangeable Blade High alloy CVM steel, through hardened, hard chrome finish. OAL 150mm/5.9”. Blades fit all Drive-Loc VI handles.ItemNo. Size + Size lbs. pkg. 0 1 .10 1 2 3 .10 1 4 5 .10 1

Pozidriv® Drive-Loc VI Interchangeable Blade High alloy CVM steel, through hardened, hard chrome finish. OAL 150mm/5.9”. Blades fit all Drive-Loc VI handles.ItemNo. Size + Size lbs. pkg. 1 2 .10 1

Blades high quality CVM steel, hard chrome finish

Adjust interchangeable

blades from 40 to 120mm

Drive-Loc mechanism guarantees a secure hold &

rapid blade exchange

For Adjustable Length Locking Blades

Locking mechanism in SoftFinish cushion grip ergonomic handle. Blade length can be adjusted from 1.7 to 4.7” In 1/8” increments

Ergonomic handles in ESD Safe, cushioned & non-slip grip

Drive-Loc VI Interchangeable Blade OAL 150mm/5.9”ItemNo. Size + Size lbs. pkg. T6 T8 .10 1 T7 T9 .10 1 T10 T15 .10 1 T20 T25 .10 1 T30 T40 .10 1

Security Drive-Loc VI Interchangeable Blade OAL 150mm/5.9”ItemNo. Size + Size lbs. pkg. T6s T8s .10 1 T7s T9s .10 1 T10s T15s .10 1 T20s T25s .10 1 T30s T40s .10 1

Torq Set® Drive-Loc VI Interchangeable Blade High alloy CVM steel, through hardened, hard chrome finish. OAL 150mm/5.9”. Blades fit all Drive-Loc VI handles.ItemNo. Size + Size lbs. pkg. 2 4 .08 1 6 8 .10 1

28486

281

281

281

281

281

281

2810628108

281072810928110

28112 28114

28137

28137

2811428112

28486

2812628127281282812928130

2813228133281342813528136

281382813928140

2814228143

www.wihatools.com

16

Wiha Drive-Loc VI Blades

Ball End Hex & Hex Metric Drive-Loc VI Interchangeable Blade Ball end enables the user to work at angles up to 25O. OAL 150mm/5.9”. Fits all Drive-Loc VI handles.ItemNo. mm + mm lbs. pkg. 2.5 2.5 .10 1 3 3 .10 1 4 4 .10 1 5 5 .10 1 6 6 .10 1

Hex Metric Drive-Loc VI Interchangeable Blade OAL 150mm/5.9”ItemNo. mm + mm lbs. pkg. 2.0 2.5 .09 1 3.0 4.0 .10 1 5.0 6.0 .10 1

Hex Inch Drive-Loc VI Interchangeable Blade OAL 150mm/5.9”ItemNo. Inch + Inch lbs. pkg. 3/32 7/64 .10 1 1/8 9/64 .10 1 5/32 3/16 .10 1

D

32 Pc. ESD Safe Drive-Loc VI Interchangeable Blade Set, In Canvas Pouch Set includes Drive-Loc VI handle & 31 interchangeable blades. Item No. lbs. 3.66Slotted: 3.5+4.5, 5.5+6.5mm Square: 1+2Slotted/Phillips: 3.0+0, 4.0+1, 6.0+2Security : T6s+T8s, T7s+T9s, T10s+T15s,T20s+T25s, T30s+T40sHex Inch: 3/32+7/64, 1/8+9/64, 5/32+3/16Hex Metric: 2.0+2.5, 3.0+4.0, 5.0+6.0Nut Drivers In: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2” Nut Drivers MM: 5.5, 6.0, 7.0, 8.0, 9.0, 10.0, 11.0mmWiha ESD Safe SoftFinish® Cushion Grip

Drive-Loc VI Inch Nut Driver Blades High alloy CVM steel, through hardened, hard chrome finish. OAL blade length 150mm/5.9”. Blades fit all Drive-Loc VI handles.ItemNo. Inch OAL lbs. pkg. 3/16 5.9” .11 1 7/32 5.9” .11 1 1/4 5.9” .11 1 9/32 5.9” .12 1 5/16 5.9” .13 1 11/32 5.9” .14 1 3/8 5.9” .15 1 7/16 5.9” .17 1 1/2 5.9” .18 1

Drive-Loc VI Metric Nut Driver Blades Blades fit all Drive-Loc VI handlesItemNo. mm OAL lbs. pkg. 4.0 150mm .10 1 4.5 150mm .10 1 5.0 150mm .11 1 5.5 150mm .11 1 6.0 150mm .12 1 7.0 150mm .13 1 8.0 150mm .13 1 9.0 150mm .14 1 10.0 150mm .15 1 11.0 150mm .20 1

Extension Blade For Drive-Loc VI Blades High alloy CVM steel, through hardened, hard chrome finish. OAL blade length 6.5”. Blades fit all Drive-Loc VI handles.ItemNo. mm OAL lbs. pkg. 6.0 150mm .14 1

ESD Safe Slotted & Phillips Interchangeable Blade Set, 4 Pc. Includes ESD Safe handle & 3 interchangeable blades. Item Slotted: No. 3.0, 4.0, 6.0mm lbs. Phillips: 0, 1, 2 .65

ESD Safe Metric Nut Drivers Interchangeable Blade Set, 8 Pc. Includes ESD Safe handle & 7 interchangeable blades. ItemNo. lbs. .75 Metric Nut Drivers: 5.0, 5.5, 6.0, 7.0, 8.0, 9.0, 10.0mm

ESD Safe TORX® Interchangeable Blade Set, 5 Pc. Includes ESD Safe handle & 4 interchangeable blades. ItemNo. lbs. .70 TORX®: T6, T7, T8, T9, T10, T15, T20, T25

ESD Safe Interchangeable Combo Blade Set, 11 Pc. Includes ESD Safe handle & 10 interchangeable blades.

ItemNo. lbs. .75 Slotted: 3.0, 4.0, 6.0mm Phillips: 0, 1, 2 Inch Nut Drivers: 3/16, 1/4, 5/16, 11/32, 3/8, 7/16, 1/2”

Wiha Interchangeable Sets

In Durable Pouch

In Durable Pouch

In Durable Pouch

In Durable Pouch

ESD Safe

D

D

D

D

281

281

281

281

281

2811628117281182811928120

281492815028151

281222812328124

281562815728158281592816028161281622816328164

28168281692817028171281722817328174281772817528176

28187

28187

28144

28144

10891

10891

10892

10892

10893

10893

10895

10895

Toll Free: (800) 494-6104

17

D

D

ESD Safe TorqueVario-S, With Window Scale EN ISO 6789, BS EN 26789, ASME B107.14M, +/- 6% Accuracy.Ergonomic multi-component handle, light and compact. Handle sizes proportioned to optimize torque range. Audible & perceptible click when torque setting has been attained. With Certificate of accuracy. Pkg. 1

Item RangeNo. Inch lbs. Increments mm 15 - 80(in/oz) 2.5 In.oz. 122-127 5 - 10 .2 In.lbs. 122-127

24 Piece ESD Safe Adjustable TorqueVario-S Bit SetCertified to EN ISO 6789, BS EN 26789, ASME B107.14M. Set includes ergonomic multi-component adjustable TorqueVario-S handle, 21 Micro Bits, Micro Bit holder and Torque adjustment tool, packed in a compact durable storage box.Item Slotted: 1.5, 2.0, 3.0, 4.0mm No. Phillips: #00, #0, #1 : T6, T7, T8, T9, T10, T15 Hex Inch: .050, 1/16, 5/64, 3/32, lbs. 7/64, 1/8, 9/64, 5/32” 1.57 28524 - Handle ESD Safe Range 5 - 10 Inch lbs.

ESD Safe Slotted Interchangeable Blades For TorqueVario-S Slotted tip blades on narrow 5/32 Hex shafts. High alloy CVM steel, hardened, satin hard chrome finish.

Item Max. Torque No. mm Inch mm Nm lbs. 3.0 .118 175 0.6 .07 4.0 .157 175 2.5 .07

ESD Safe Interchangeable Blades For TorqueVario-S tip blades on narrow 5/32 Hex shafts. High alloy CVM steel, hardened, hard chromed.Item Max. Torque No. Size mm mm Nm lbs. T5 175 4.0 0.4 .07 T7 175 4.0 0.9 .07 T8 175 4.0 1.3 .07 T9 175 4.0 2.5 .07 T10 175 4.0 3.8 .07

24 Piece ESD Safe Adjustable TorqueVario-S Bit SetCertified to EN ISO 6789, BS EN 26789, ASME B107.14M. Set includes ergonomic multi-component adjustable TorqueVario-S handle, 21 Micro Bits, Micro Bit holder and Torque adjustment tool, packed in a compact durable storage box.Item No. Slotted: 0.8, 1.2, 1.5, 2.0mm Phillips: #000, #00, #0 : T1, T2, T3, T4, T5, T6lbs. Hex Metric: 0.7, 0.9, 1.3mm 1.30 Pentalobe: PL1, PL2, PL3, PL4 28500 - Handle ESD Safe .04 - .46Nm (+/-10%)

Each TorqueVario handle has unique serial number and certificate of calibration

ESD Safe Adjustable TorqueControl Tools

Includes Certificate

With Certificate of Calibration


24 Piece TorqueVario-S ESD Safe Micro-Bit SetCertified to EN ISO 6789, BS EN 26789, ASME B107.14M. Set includes ergonomic multi-component adjustable TorqueVario-S handle, 21 Micro Bits, Micro Bit holder and Torque adjustment tool. Item Slotted: 1.5, 2.0, 3.0, 4.0mm No. Phillips: #00, #0, #1 : T6, T7, T8, T9, T10, T15 Hex Inch: .050, 1/16, 5/64, 3/32, lbs. 7/64, 1/8, 9/64, 5/32” 1.35 28522 - ESD Safe Handle Range 15-80 Inch/oz.

* +/- 10% (This unit only)

Packed in a compact durable storage box

D

D

D

Item RangeNo. Nm mm Inch lbs. .04 - .46 124 4.875” .35

+/- 10%


D

ESD Safe TorqueVario-S Newton Meter, With Window Scale

Includes CertificateD

D

ESD Safe Pentalobe Interchangeable Blades For TorqueVario-S Newton Meter Handle tip blades on narrow 5/32 Hex shafts. High alloy CVM steel, hardened, hard chromed.Item No. Size mm mm lbs. pkg. PL1 175 4.0 .07 1

ESD Safe Bit Holder Adapter For 1/4” Drive Bits Shaft CVM steel, hardened, corrosion protected. (Not for use in Insulated handles) ItemNo. Size mm mm lbs. pkg. 1/4 162 4.0 .09 1

Item RangeNo. Inch lbs. Increments mm 5 - 18 .5 In.lbs. 126-131

ESD Safe TorqueVario-S, W/Window

lbs. .33.34

pkg. 1

pkg. 11

pkg. 11111

lbs. .46

285

28522*28524

28882

28882

288

2880528809

288

2882528827288282882928830

28890

28890

28591

28591

28895

28895

28500

28500*

28818

28818

28426

284

www.wihatools.com

18

Full Flush

Item No. mm Inch Copper Head Wdth 115 4.5 1.0 11.0mm

Precision Cutters, Wide Tapered Head, Full Flush Cutters drop-forged for an ideal material structure. Precise aligned cutting edges are additionally induction hardened at a hardness of Approx. 64OHRC. Two component non-slip soft grip handle, ESD Safe Dissipative.

7.5mm11.0mm

115mm

Precision Cutters Wide Tapered Head

D



Precision Cutters, Wide Tapered Head, Bevel Cutters drop-forged for an ideal material structure. Precise aligned cutting edges are additionally induction hardened at a hardness of Approx. 64OHRC. Two component non-slip soft grip handle, ESD Safe Dissipative.

Bevel


Precision Cutters, Wide Tapered Head, Flush Cutters drop-forged for an ideal material structure. Precise aligned cutting edges are additionally induction hardened at a hardness of Approx. 64OHRC. Two component non-slip soft grip handle, ESD Safe Dissipative.

7.5mm11.5mm

7.5mm11.0mm

115mm

115mm

D

Precision Cutters Wide Tapered HeadFlush

D


Precision Cutters, Small Tapered Head With Hollow Ground Back, Flush Cutters drop-forged for an ideal material structure. Precise aligned cutting edges are additionally induction hardened at a hardness of Approx. 64OHRC. ESD Safe Dissipative.

Precision Cutters Tapered Head

6.0mm9.5mm

115mm

Flush

D


Precision Cutters, Small Tapered Head With Hollow Ground Back, Semi Flush Cutters drop-forged for an ideal material structure. Precise aligned cutting edges are additionally induction hardened at a hardness of Approx. 64OHRC. Two component non-slip soft grip handle, ESD Safe Dissipative.


7.5mm9.5mm

115mmD

Semi Flush

Flush


Precision Cutters, Small Tapered Head, Flush Cutters drop-forged for an ideal material structure. Precise aligned cutting edges are additionally induction hardened at a hardness of Approx. 64OHRC. Two component non-slip soft grip handle, ESD Safe Dissipative.


6.0mm9.5mm

115mmD

D


Precision Cutters, Small Tapered Head, Semi Flush Cutters drop-forged for an ideal material structure. Precise aligned cutting edges are additionally induction hardened at a hardness of Approx. 64OHRC. Two component non-slip soft grip handle, ESD Safe Dissipative. lbs. .19

Semi Flush

7.5mm9.5mm

115mm


Hardened & annealed high carbon tool steel, induction hardened cutting edges

Box joint for longer tool life & endurance, mirror polished finish


Welded double leaf spring

Protects the hand and reduces manual effort & user fatigue

Beveled Cutter Semi-Flush Cutter

Flush Cutter Ultra Full Flush

Wiha ESD Safe Pliers & Cutters

D

Two component handle with non-slip soft grip surface

lbs. Pkg..23 1

lbs. Pkg..19 1

lbs. Pkg..20 1

lbs. Pkg..19 1

lbs. Pkg..19 1

lbs. Pkg..19 1

Pkg.1

32710

32710

32706

32706

32708

32708

32704

32704

32702

32702

32705

32705

32703

32703

Toll Free: (800) 494-6104

19

Precision Cutters Slim Oval Form


Precision Cutters, Wide Tapered Head With Wire Trapping Device, Flush Cutters drop-forged for an ideal material structure. Precise aligned cutting edges are additionally induction hardened at a hardness of Approx. 64OHRC. ESD Safe Dissipative.


Precision Cutters, Slim Oval Head, Flush Cutters drop-forged for an ideal material structure. Precise aligned cutting edges are additionally induction hardened at a hardness of Approx. 64OHRC. Two component non-slip soft grip handle, ESD Safe Dissipative.

7.5mm

(10.8mm) w/wire

11.5mm

7.5mm10.5mm

115mm

115mm

Flush

D


Flush

D

115mm

Precision Cutters Slim Oval Form

6.0mm9.5mm


Precision Cutters, Slim Oval Head, Full Flush Cutters drop-forged for an ideal material structure. Precise aligned cutting edges are additionally induction hardened at a hardness of Approx. 64OHRC. Two component non-slip soft grip handle, ESD Safe Dissipative.

Full Flush

D

Precision Cutters, Wide Oval Head, Bevel Cutters drop-forged for an ideal material structure. Precise aligned cutting edges are additionally induction hardened at a hardness of Approx. 64OHRC. Two component non-slip soft grip handle, ESD Safe Dissipative.

115mm

7.5mm11.5mm

Precision Cutters Wide Oval FormBevel

D


115mm

7.5mm11.5mm

Precision Cutters Wide Oval Form

Precision Cutters, Wide Oval Head, Flush Cutters drop-forged for an ideal material structure. Precise aligned cutting edges are additionally induction hardened at a hardness of Approx. 64OHRC. Two component non-slip soft grip handle, ESD Safe Dissipative.

Flush

D


Precision Cutters, Wide Oval Head With Wire Trapping Device, Flush Cutters drop-forged for an ideal material structure. Precise aligned cutting edges are additionally induction hardened at a hardness of Approx. 64OHRC. Two component non-slip soft grip handle, ESD Safe Dissipative.

115mm

7.5mm11.0mm

Precision Cutters Wide Oval FormFlush

D


Ultra Full Flush

Oblique Angled Cutters, 29O, Full Flush Oblique Cutters drop-forged for an ideal material structure. Precise aligned cutting edges are additionally induction hardened at a hardness of Approx. 64OHRC. Two component non-slip soft grip handle, ESD Safe Dissipative.

Oblique Angled Cutters, 29O, Short Head, Semi Flush Oblique Cutters drop-forged for an ideal material structure. Precise aligned cutting edges are additionally induction hardened at a hardness of Approx. 64OHRC. Two component non-slip soft grip handle, ESD Safe Dissipative.

115mm

115mm

7.5mm12.0mm

7.5mm12.0mm

Oblique Angled Cutters

Oblique Angled Cutters

D



D

Semi Flush

Beveled Cutter Semi-Flush Cutter

Flush Cutter Ultra Full Flush

lbs. Pkg..19 1

lbs. Pkg..23 1

lbs. Pkg..19 1

lbs. Pkg..19 1

lbs. Pkg..23 1

lbs. Pkg..23 1

lbs. Pkg..24 1

lbs. Pkg..24 1

32711

32711

32712

32712

32714

32716

32720

32721

32714

32716

32720

32721

32724

32726

32724

32726

www.wihatools.com

20

145mm

Needle Nose, Bent 90O

ESD Safe Pliers

7.5mm12.0mm

ESD Safe Pliers, Needle Nose Pliers, Bent 90O, Smooth Jaws Pliers drop-forged for an ideal material structure. Precisely aligned, jaws, hardened. Two component non-slip soft grip handle, ESD Safe Dissipative.

120mm

Short RoundNose Pliers

ESD Safe Pliers, Short Round Nose Pliers, Smooth Jaws Pliers drop-forged for an ideal material structure. Precisely aligned, jaws, hardened. Two component non-slip soft grip handle, ESD Safe Dissipative.

6.5mm9.5mm

ESD Safe Pliers

D

Item No. mm Inch Head Wdth 145 5 3/4 12.0mm


120mm

Short Flat Nose Pliers

ESD Safe Pliers, Short Flat Nose Pliers, Smooth Jaws Pliers drop-forged for an ideal material structure. Precisely aligned, jaws, hardened. Two component non-slip soft grip handle, ESD Safe Dissipative.

6.5mm9.5mm

ESD Safe Pliers


D

D

Short Snipe Nose


ESD Safe Pliers, Short Snipe Nose (Chain Nose) Straight, Serrated Jaws Pliers drop-forged for an ideal material structure. Precisely aligned, jaws, hardened. Two component non-slip soft grip handle, ESD Safe Dissipative.

120mm

6.5mm9.5mm

ESD Safe Pliers

D

Bent Snipe Nose 45O

ESD Safe Pliers, Snipe Nose (Chain Nose) Bent 45O, Smooth Jaws Pliers drop-forged for an ideal material structure. Precisely aligned, jaws, hardened. ESD Safe Dissipative.

120mm

6.5mm9.5mm

ESD Safe Pliers

D


Long Needle Nose

ESD Safe Pliers, Long Needle Nose Pliers, Straight, Serrated Jaws Pliers drop-forged for an ideal material structure. Precisely aligned, jaws, hardened. ESD Safe Dissipative.

145mm

7.5mm12.0mm

ESD Safe Pliers

D


Oblique Front Cutters, Very Small Head, 40O, Flush Oblique Cutters drop-forged for an ideal material structure. Precise aligned cutting edges are additionally induction hardened at a hardness of Approx. 64OHRC. ESD Safe Dissipative.

130mm

6.2mm9.7mm

Oblique Front Cutters


Flush

D

130mm

End Cutters Extra Slim

2.9mm 6.0mm

7.0mm

Tip Width

End Cutters, Extra Slim, Semi Flush End Cutters drop-forged for an ideal material structure. Precise aligned cutting edges are additionally induction hardened at a hardness of Approx. 64OHRC. ESD Safe Dissipative.

D

Semi Flush

Item No. mm Inch Copper Tip Wdth 130 5.1 0.6 4.1mm

115mm

End Cutters Wide Head

16.5mm 7.5mm11.5mm

End Cutters, Wide Head, Flush End Cutters drop-forged for an ideal material structure. Precise aligned cutting edges are additionally induction hardened at a hardness of Approx. 64OHRC. ESD Safe Dissipative.

Flush

D


lbs. Pkg..21 1

lbs. Pkg..17 1

lbs. Pkg..16 1

lbs. Pkg..20 1

lbs. Pkg..27 1

lbs. Pkg..20 1

lbs. Pkg..16 1

lbs. Pkg..18 1

lbs. Pkg..21 1

32748

32750

32752

32748

32750

32752

32742

32744

32746

32742

32744

32746

32728

32728

32732

32734

32732

32734

Toll Free: (800) 494-6104

21

ESD Safe Tool Set In Canvas Pouch

11 piece ESD Safe Pliers & Slotted/Phillips Precision Drivers Set In Custom Case ESD Safe Pliers & Cutters4.5” Tapered Flush Cutters 4.5” Snipe Nose Pliers4.375” Oblique Cutters 5.7” Long Nose PliersESD Safe ScrewdriversSlotted 2.0, 2.5, 3.0, 3.5mmPhillips #00, 0, 1 lbs. 2.43

11 Piece Set, 4 ESD Safe Pliers, Slotted & Phillips Screwdrivers Pliers drop-forged for an ideal material structure. Two component non-slip soft grip handle.

D

4 piece ESD Safe Pliers Set Set includes: 4.5” Oval Side Cutters 5.75” Long Nose Pliers 4.75” Flat Nose Pliers 4.375” Oblique Cutters lbs. 1.02

4 Piece ESD Safe Pliers Set In Custom Case Pliers drop-forged for an ideal material structure. Two component non-slip soft grip handle. ESD Safe Dissipative.

11 pc. ESD Safe Pliers, Tweezers & SYSTEM 4 Precision Set In Custom Case:ESD Safe Pliers & Cutters4.5” Oval Side Cutters 5.75” Long Nose Pliers4.75” Flat Nose Pliers 4.375” Oblique CuttersSYSTEM 4 Set in separate pouchESD Safe Conductive Precision HandleSlotted: 1.5, 2.0, 3.0 & 4.0mm Phillips: #000, 00, 0 & 1ESD Safe Tweezers: AA SA ESD & 7a SA ESD lbs. 1.32

11 Pc. Set, 4 ESD Safe Pliers, SYSTEM 4 Slotted & Phillips 5 Pc. Set & 2 ESD Safe Tweezers Pliers drop-forged for an ideal material structure. Two component non-slip soft grip handle. ESD Safe Precision handle & 4 CVM tool steel blades. Tweezers anti-static conductive, ESD Safe Hypo allergenic, anti-magnetic stainless.


D

D


ESD standard IEC 61340-5-1Item No. mm Inch Strips AWG Pkg. lbs. 165 6.5 30 to 20 1 .25

Proturn ESD Safe Wire Stripper C70 special tool steel. Glare free, black finish. ESD Safe handle with non-slip grips. Strips 0.2, 0.3, 0.4, 0.5, 0.6, 0.8mm

Glare free black finish


Hardened steelreturn spring

Tested ESD Safe handle with non-slip soft grip surface, protects the hand and reduces manual effort & user fatigue

Wiha ESD Safe Proturn Pliers & Cutters

A

165mm

ESD Safe Wire Stripper

Item No. mm Inch Pkg. lbs. 160 6.3 1 .18

Proturn ESD Safe Long Nose Pliers, Serrated Jaws C70 special tool steel. Glare free, black finish. ESD Safe handle with non-slip grips.

160mm

ESD Safe Long Nose Pliers


B C

B A

C

proturn

D

D

proturn

proturn

SerratedJaws

A = 30mmB = 12mmC = 4mm

D

A = 2mmB = 30mmC = 3mm

ESD Safe Precision Flush Cutting Diagonal Cutters Low wear lap joint, riveted and able to withstand high levels of load. Lightweight action, clean cutting. Long life edge is achieved through additional induction hardening to approx. 64HRC. Special C70 tool steel. Two component non-slip soft grip handle, ESD Safe Dissipative.

D

Item No. mm Inch Head Wdth 133 5.25 .5”

ESD Safe Diagonal Cutters

ESD Safe Long Nose Pliers With Return Spring Extra long cutters for flat and round cables. Serrated jaws. Long life edge is achieved through additional induction harden-ing to approx. 64HRC. Special C70 tool steel forgings. Two component non-slip soft grip handle, ESD Safe Dissipative.

ESD Long Nose Pliers

D

Item No. mm Inch Head Wdth 165 6.5 .625”

ESD Safe Tool Set In Canvas Pouch

lbs. Pkg..18 1

lbs. Pkg..24 1

32790

32791

32790

32791

45810

45811

45810

45811

32793

32793

32760

32760

32762

32762

www.wihatools.com

22

Item No. mm Inch AWG Pkg. lbs. 127 5.0 18/1mm 1 .14

Proturn ESD Safe 45° Precision Cutters/Flush Cut ESD standard IEC 61340-5-1. C70 special tool steel. Glare free, black finish. ESD Safe handle with non-slip grips.

127mm

ESD Safe Diagonal Cutters45° Angle

Item No. mm Inch AWG Pkg. lbs. 140 5.5 16/1.3mm 1 .15


140mm


BA

C

BA

C

Wiha ESD Safe Proturn Pliers & CuttersSurface resistance of handles is 106 - 109 Ohms

proturn

proturn

D


D

A = 13mmB = 12mmC = 3mm

133mm

ESD Safe Diagonal Cutters21° Angleproturn

BA

C



A = 10mmB = 10mmC = 2mm

D



140mm

ESD Safe Diagonal Cutters

45° Angle

BA

C

proturnD

A = 13mmB = 12mmC = 2.5mm


Proturn ESD Safe Round Nose Pliers ESD standard IEC 61340-5-1. C70 special tool steel. Glare free, black finish. ESD Safe handle with non-slip grips.

152mm

ESD Safe Round Nose Pliers

Item No. mm Inch AWG Pkg. lbs. 127 5.0 18/1mm 1 .16


127mm


BA

C

BA

C

proturn

proturn


D

D

A = 13mmB = 12mmC = 3mm


Proturn ESD Safe Flat Nose Smooth Jaws Pliers C70 special tool steel. Glare free, black finish. ESD Safe handle with non-slip grips.

160mm

ESD Safe Flat Nose Pliers

BA

C


Proturn ESD Safe Bent Nose Pliers ESD standard IEC 61340-5-1. C70 special tool steel. Glare free, black finish. ESD Safe handle with non-slip grips.

152mm

ESD Safe Bent Nose Pliers

B A

C

proturn

proturn

D



D

45821

45821

45822

45822

45823

45823

45824

45824

45814

45814

45820

45820

45812

45812

45813

45813

Toll Free: (800) 494-6104

23

26 Piece ESD Safe Pliers, Precision Screwdrivers, Micro Bit Set & ESD Tweezer Set in Canvas Pouch ESD Safe Proturn Strippers, Pliers & Cutters6.5” Wire Stripper 6.3” Long Nose Pliers6.0” Bent Nose Pliers 5.25” 21° Precision CuttersESD Safe Slotted & Phillips Precision DriversSlotted: 2.0, 2.5, 3.0mm & Phillips: 0, 1ESD Micro Bit Handle, Micro Bit Extension & 14 Micro Bits 4mmHex: .7, .9, 1.3, 1.5, 2.0, 2.5, 3.0mm Torx: T4, T5, T6, T7, T8, T9, T10 ESD Safe Tweezer: 00 SA ESD - 120mm Heavy Duty Strong, Tapered To Strong Point lbs. 1.74

26 Pc. Set, Proturn ESD Safe Pliers, Precision Slotted & Phillips Screwdrivers, Precision Micro Bit Set & ESD Safe Tweezers ESD Proturn Pliers glare free, black finish, ESD Safe non-slip soft grips. ESD Safe Precision Slotted & Phillips screwdrivers, CVM tool steel blades. Precision ESD Safe Micro Bit handle holds Micro Bit extension and 4mm Micro bits. Anti-static Tweezer conductive, ESD Safe Hypo allergenic, anti-magnetic stainless.



proturn

Wiha ESD Safe Proturn Pliers/Cutters, Precison Drivers & MicroBits Set

D

Professional Quality ESD TweezersESD SAFE • STATIC DISSIPATIVE • HYPO ALLERGENIC COATED • TEXTURED GRIPPING SURFACE

Item No. Description wt. AA SA ESD-130mm .09Static dissipative, ESD Safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant.

Universal Fine Point Tweezers

Item No. Description wt. GG SA ESD - 130mm .09Static dissipative, ESD Safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant.

Sturdy Long, Fine Round Points

Item No. Description wt. 3 SA ESD - 120mm .08Static dissipative, ESD Safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant.

Fine Round Points For Assembly

Item No. Description wt. 7a SA ESD - 120mm .08Static dissipative, ESD Safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant.

Curved Extra Fine Rounded Tips

Item No. Description wt. SS SA ESD - 135mm .08Static dissipative, ESD Safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant.

Long Narrow Body Low Force

Item No. Description wt. 3c SA ESD - 110mm .08Static dissipative, ESD Safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant.

Fine Round Points Shorter


Reduced Body To Medium Point


Very Fine Points/Tapered To Tip

Item No. Description wt. 2a SA ESD - 120mm .08Static dissipative, ESD Safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant.

Flat Round Tip Smooth Sides


Extra Fine Points/Tapered To Tip

D

45890

45890

44501

44502

44503

44504

44505

44506

44507

44508

44509

44510

www.wihatools.com

24

Item No. Description wt. 5bb SA ESD-107mm .08Static dissipative, ESD Safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant.

Extra Fine Points Bent 30O - 3mm Long Tips

Wiha Professional Quality ESD Safe Tweezers

Item No. Description wt. 59 SA-SMD ESD-117mm .08Static dissipative, ESD Safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant.

Flat Bent 35O - 2mm Diameter Grip Radius

Item No. Description wt. 8b SA ESD - 120mm .08Static dissipative, ESD Safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant.

MicroTip Bent 30O 1.6mm

Item No. Description wt. PSF SA ESD-125mm .09Static dissipative, ESD Safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant.


MicroTip For Chips Angled 1.6 x 1 x 1mm

Long Rounded to 1.0mm Wide No Serration

Item No. Description wt. 5abb SA ESD - 117mm .08Static dissipative, ESD Safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant.

Angled Extra Fine Points Bent 30O - 3mm Long Tips

Item No. Description wt. 7abb SA ESD - 120mm .08 Static dissipative, ESD Safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant.


Flat Bent 35O, 3mm Diameter Grip

Curved Extra Fine, 3mm Long Straight Tip

Item No. Description wt. SSbb SA ESD-140mm .08Static dissipative, ESD Safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant.

Narrow Body Low Force Bent 35O - 3mm Tip


MicroTip 45O Hook 1x1x2mm


Universal Blunt Tip Serrated


Narrow Rounded Tip Serrated, Guide Pin


Item No. Description wt. 50 SA ESD - 120mm .08Static dissipative, ESD Safe hypo allergenic tweezers made from Vommaloy. Special stainless steel,anti-magnetic and acid resistant.

Holds 0.8 to 2mm Diameter





Angled 3.5 to 7mm Diameter



44518

44520

44521

44522

44523

44524

44525

44526

44527

44528

44529

44530

44511

44512

44513

44514

44515

Toll Free: (800) 494-6104

25


Angled & Slightly Bent With Extra Fine Tips


Heavy Duty Strong Tweezers Tapered To Strong Point


ESD Safe General Purpose Fine Point

Item No. Description wt. 11SA-SMD ESD-117mm .08Static dissipative, ESD Safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant.

MicroTip 30O Bend & 0.5mm Slot Milled

Item No. Description wt. 22b SA ESD - 155mm .10Static dissipative, ESD Safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant.

Narrow Body, Bent, Long Guide Pin, Serrated

Item No. Description wt. PSF SA ESD S -125mm .09Static dissipative, ESD Safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant.

Blunt Tips - 1.0mm Wide Serrated

Item No. Description wt. F SA ESD - 120mm .08Static dissipative, ESD Safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant.

Flat and Broad Tips 3mm Wide

Item No. Description wt. 8ab SA-SMD ESD-120mm .08 Static dissipative, ESD Safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant.

MicroTip Straight & 0.5mm Slot Milled

Item No. Description wt. 19 SA-SMD ESD-120mm .08 Static dissipative, ESD Safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant.

MicroTip 30O Bent & Angled With 0.5 Slot

Item No. Description wt. R10 SA ESD - 117mm .07Static dissipative, ESD Safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant.

Chip Holding Curved Fine MicroTip

Item No. Description wt. 72a SA ESD - .07Static dissipative, ESD Safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant.

Wafer Tweezer

Item No. Description wt. 4b SA ESD - 110mm .08 Static dissipative, ESD Safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant.

Very Fine Points 40° Tapered To Tip


9mm Wide With Back Stop Pins - Wafer


Angled 12mm Wide Flat, Back Stop - Wafer

Wiha Professional Quality ESD Safe Tweezers

SYSTEM 4 Premium ESD Safe Micro Bit Set, 28 Pcs. Includes Wiha ESD Safe Precision Handle, 1/4” to 4mm Adapter, 100mm Bit Extension, ESD Safe Tweezers & 21 Micro Bits. Item No. SYSTEM 4 Micro Bit Set75993 Micro Bits: Slotted: 0.8, 1.5, 2.0, 2.5, 3.0, 3.5mm Phillips: 000, 00, 0, 1, 2 : T1, T2, T3, T4, T5, T6, T7, T8, T9, T10 ESD Safe Tweezers: 5SA ESD, 7aSA ESD, 2ASA ESD, AASA ESD, OOSA ESD lbs. .95

75993D

Premium ESD Safe Micro Bit & Tweezers Set

S

44531

44532

44533

55531

55532

55533

55534

55535

55536

55537

55539

55538

55546

55547

www.wihatools.com

26

Numerical Index by Item Number

32726 19 32728 20 32732 20 32734 2032742 20 32744 20 32746 20 32748 20 32750 20 32752 20 32760 2132762 2132790 21 32791 21 32793 21 36200 14 36204 14 36206 14 36208 14 36209 14 36218 14 36219 14 36224 14 36260 14 36289 14 38701 1338790 13 41105 13 41106 13 44501 23 44502 23 44503 23 44504 23 44505 23 44506 23 44507 23 44508 2344509 23 44510 23 44511 24 44512 24 44513 24 44514 24 44515 24 44518 24 44520 24 44521 24 44522 24 44523 24 44524 24 44525 24 44526 24 44527 24 44528 24 44529 24 44530 24 44531 25 44532 25 44533 25 45810 21 45811 21

10891 1610892 16 10893 16 10895 1626903 826904 826905 8 26911 826912 826922 826958 726959 726960 726961 726970 726971 826972 826973 826974 8 26975 726976 726977 726978 726979 726980 726981 726982 726983 726985 726994 727208 4 27210 4 27212 4 27215 4 27218 427220 4 27222 4 27223 4 27224 4 27225 4 27227 4 27228 4 27230 4 27232 4 27234 4 27235 4 27237 4 27238 4 27240 4 27242 4 27243 4 27290 4 27302 4 27305 4 27307 4 27310 4 27314 4 27316 4 27320 4 27322 4 27324 4

27326 4 27390 4 27393 427397 527398 4 27399 4 27505 6 27507 6 27509 6 27510 6 27513 6 27515 6 27520 6 27525 6 27530 6 27535 6 27537 6 27539 6 27541 6 27543 6 27545 6 27547 6 27549 6 27590 6 27591 6 27701 6 27703 6 27705 6 27707 6 27709 6 27711 6 27713 6 27715 6 27720 6 27721 627722 6 27725 6 27730 6 27735 6 27740 6 27745 6 27750 6 27755 6 27760 6 27790 6 27791 6 27801 5 27802 5 27803 5 27804 5 27805 5 27811 5 27817 5 27823 5 27829 5 27835 5 27841 5 27847 5 27850 5 27851 5 27852 5

27853 5 27854 5 27855 5 27856 5 27857 5 27890 5 27894 5 27899 5 27920 5 28000 8 28002 728003 728004 728005 728006 728007 728008 728009 728010 728011 728012 728013 728014 728015 728016 728017 728106 15 28107 15 28108 15 28109 15 28110 15 28112 15 28114 15 28116 16 28117 16 28118 16 28119 16 28120 16 28122 16 28123 16 28124 16 28126 15 28127 15 28128 15 28129 15 28130 15 28132 15 28133 15 28134 15 28135 15 28136 15 28137 1528138 15 28139 15 28140 15 28142 15 28143 15 28144 16 28149 16 28150 16 28151 16

28156 16 28157 16 28158 16 28159 16 28160 16 28161 16 28162 16 28163 16 28164 16 28168 16 28169 16 28170 16 28171 16 28172 1628173 16 28174 16 28175 16 28176 16 28177 16 28180 1328187 16 28486 15 28500 1728522 17 28524 17 28526 17 28591 17 28805 17 28809 17 28818 17 28825 17 28827 17 28828 17 28829 17 28830 17 28882 1728890 17 28895 1730240 14 30242 14 30244 14 30246 14 30248 14 30292 14 31150 14 31151 14 31152 14 32702 18 32703 18 32704 18 32705 18 32706 18 32708 18 32710 18 32711 19 32712 19 32714 19 32716 19 32720 19 32721 19 32724 19

Item No. Pg. Item No. Pg. Item No. Pg. Item No. Pg. Item No. Pg.

Toll Free: (800) 494-6104

27

45812 22 45813 22 45814 22 45820 22 45821 22 45822 22 45823 22 45824 2245890 23 55531 2555532 2555533 2555534 2555535 2555536 2555537 2555538 2555539 2555546 2555547 2575008 10 75012 10 75015 10 75018 10 75020 10 75025 10 75030 10 75035 10 75040 10 75093 12 75094 12 75095 12 75096 1275097 1275105 1075110 10 75115 10 75120 1075125 10 75307 10 75309 10 75313 10 75315 10 75320 10 75322 10 75325 10 75330 10 75332 10 75340 10 75342 10 75350 10 75352 10 75354 10 75356 10 75358 10 75360 10 75362 10 75364 10 75366 10 75368 10 75370 10

75372 10 75602 975603 975604 975605 975606 975607 975608 975609 975610 975611 975612 975613 975614 975615 975616 975617 975618 975619 975620 975621 975622 975623 975624 975626 975627 975628 975629 975630 975631 975632 975633 975634 975635 975636 975637 975638 975639 975640 975641 975642 975643 975644 975645 975646 975647 975648 975649 975650 975651 975652 975653 975654 975655 975656 975657 975658 975659 975660 975661 975662 9

75663 975664 975665 975666 975667 975668 975669 975670 975671 975672 975673 975674 975675 975676 975677 975681 975683 975701 1075702 1075703 10 75704 10 75705 10 75706 10 75707 10 75708 10 75709 10 75710 10 75715 10 75720 10 75735 10 75742 10 75743 1075744 1075745 1075746 1075747 1075748 1075801 8 75810 1075811 1075812 1075813 1075814 1075815 1075816 1075817 1075820 1075821 1075822 1075823 1075824 1075825 1075826 1075827 1075900 8 75901 8 75902 8 75965 1375968 1175971 1175977 11

75980 1175982 875984 875986 875987 875988 875991 12 75992 12 75993 2575994 12 75995 1175996 11 91118 792092 5

Prop65 WARNING: This product could expose you to chemicals including Vinyl Chloride, Ethylene Glycol, Ni or CrVl, which are known to the state od California to cause cancer or reproductive harm. For more information go to www.P65warnings.ca.gov/

Item No. Pg. Item No. Pg. Item No. Pg. Item No. Pg. Item No. Pg.

www.wihatools.com

Subject to change without notice

©2019 Willi Hahn Corporation

®Torx is a registered trademark of Acument Intellectual Properties LLC.

Catalog Item No. 99945version - 3/1/19

PROFESSIONAL ESD SAFE TOOLS

.wo

Wiha Quality Tools1348 Dundas Circle

Monticello, MN 55362tel: 763.295.6591fax: 763.295.6598

To:

Wiha Tools Canada Ltd.www.wihatools.ca

Brampton, ONT L6T 4X4tel: 866.494.0096 or 763.295.6591

fax: 763.295.6598

(800) 494-6104fax: (800) [email protected]

99001.wo - TorqueControl Catalog99977.wo - Pliers/Crimpers Catalog

99934.wo - Hex Tools Catalog99002.wo - Screwdrivers Catalog

99919.wo - Insulated Catalog99951.wo - Bits Catalog

99006.wo - Tech Tools Catalog

99914.wo - TORX Catalog

99004.wo - Shop Tools Catalog

2019 2019

2019 2019 2019 2019

99007.wo - Merchandise Catalog

complete esd safe program - assets.alliedelec.com · prec. slotted/phillips 4-5 prec. torx/torxplus...

Documents