composite adhesives - tensor global

w w w . q u i n g l o b a l . c o m | w w w . t e n s o r g l o b a l . c o mt w i t t e r . c o m / q u i n g l o b a l u k | + 4 4 ( 0 ) 8 4 5 3 8 1 2 2 3 3

A D H E S I V E I N N O V A T O R S

C O M P O S I T E A D H E S I V E SA p r o d u c t o f

W H A T I S T E N S O R G R I P ® ?As far as spray adhesives are concerned, no other product can compare to the strength, tenacit y and rel iabi l i t y of TensorGrip ® . Avai lable in canister systems as well as 50 0ml aerosols t ins , TensorGrip’s innovat ive formula breaks down barr iers presented by t radi t ional bonding methods with ef for t less ease.

Our adhesive systems el iminate the need to use t radi t ional methods of bonding, that are messy, wasteful and t ime-consuming. Because TensorGrip ® is a spray adhesive you are completely in control of the dispersal of glue, resul t ing in an even spray pat tern the way you want i t without the fuss and inconsistency that comes with using hand-applied adhesive.

Our revolut ionar y adhesive formulas have been proven to almost completely remove the t ime spent wait ing for glue to tack ; where t radi t ional ly you would be wait ing for 25 minutes , TensorGrip ® can tack of f in as l i t t le as one minute.

Not only wil l TensorGrip ® speed up your work f low and drast ical ly reduce product ion t ime, i t is guaranteed to t ransform the way in which mater ia ls are bonded together with not iceably super ior resul ts .

T H E C O M P O S I T ER A N G EDesigned to specification; engineered to OUTPERFORM. Through identifying the needs of the Composites industry, the Research & Development team at Quin Global have developed a groundbreaking range of adhesives purposely formulated for exact applications.

It is with precision in mind that we have split our Composite Adhesive range into two categories:

P L U G B U I L DOur Plug Build series of adhesives are designed for each stage of the plug building process, from bonding polystyrene and plywood to finishing a polystyrene mould.

I N F U S I O NTested and proven in all aspects of RTM Vacuum Infusion, this range of adhesive systems redefines speed and accuracy.

A E R O S O L C A N I S T E R

This convenient 500ml aerosol is perfect for small applications or for less-frequent users. Small but sticks all the same!

500ml65mm x 238mm Up to 0.600kg

Our most popular adhesive container; comes equipped with a gun and hose system for fast and accurate dispersal. A long-lasting and cost-effective solution available in a 13 or 22 litre canister.

13 / 22ltr310mm x 450mmUp to 23kg

T H E S Y S T E M

I N T E R M E D I A T E

The largest in our range, suitable mostly for use in large-scale production environments.

110ltr380mm x 1258mmUp to 125kg

T R I G G E RPull the trigger and out comes the adhesive. Simple!

A D J U S T M E N T W H E E LUse this to control the flow of adhesive dispersed from the gun; turn anti-clockwise to open and clockwise to close.

N O Z Z L EChangeable nozzles designed to optimise spraying performance - subject to adhesive type.

H O S E C O N N E C T I O NThe attachment point to connect the gun to the canister via the hose.

T H E G U N

V A L V E

A D H E S I V E & G A S M I X T U R E

D I P T U B E

Controls the flow of adhesive from the canister.

Reaches to the bottom of the canister to ensure that every drop of adhesive is used.

Engineered with care and precision with intent to be the very best in the world. Pressurised gas is designed to propel the adhesive out of the system.

Volume:Size:

Weight*:

Volume:Size:

Weight*:

Volume:Size:

Weight*:

S Y S T E M V O L U M E SNo two workshops are the same and project requirements will vary. So whether it's a small-scale application or high-end industrial manufacturing, we have designed the system that is right for you.

*please refer to technical data sheet for product specific weight

P R E C I S E L Y D E S I G N E D F O R P R E C I S I O N M A N U F A C T U R I N G

T C 1 0 T C 2 0 T C 3 0

TECH

DATA

E P S P L U G B U I L D F O A M A D H E S I V E

TensorGrip® TC20 is a high performance, polyurethane foam adhesive. The TC20 is developed to work in conjunction with the TC30 or as a stand-alone product. The bond strength and compatibility with polystyrene makes this product the perfect partner when bonding blocks of polystyrene together or to the sub-deck.

U S I N G T C 2 0 *

• Fast, high tack.• High solids.• Polystyrene and EPS compatible.

A D V A N T A G E S

BeadSpray

1 Sided

5-7 minutes

T C 2 0M O U L D D E C K H I G H G R A B S P R A Y A D H E S I V E

TensorGrip® TC10 is a fast drying contact adhesive with good heat resistance. It is designed to create fast bonds between plywood sheets for mould deck substrate work. TC10 will eliminate long and time consuming bonding methods like PVA and use of mechanical fixings.

U S I N G T C 1 0 *

• Incredible grab.• Good heat resistance.• High solids.• Easy application control.• Versatile.• Economic.

A D V A N T A G E S

Web Spray

C O L O U R :

2 Sided

60 minutes

T C 1 0(2 sided application will result in 50% total coverage)

1 0 0

2 0 0

3 0 0

4 0 0

5 0 0

6 0 0

1 1 0 l t r - n /a

2 2 l t r - 1 9 5 m 2

5 0 0 m l - n /a

Timber

MDF

Clear

1 0 0

2 0 0

3 0 0

4 0 0

5 0 0

6 0 0

1 1 0 l t r - n /a

2 2 l t r - 4 8 0 m 2

5 0 0 m l - n /a

Polystyrene

Timber

C O L O U R :

Clear

Apply lines of TC20 to plywood surface every 150 millimetres.

Place a large block of polystyrene onto the desired location.

Clear the plywood surface of dust and debris to ensure it is ready for bonding.

Spray an even coat of TC10 onto both surfaces and place TensorGrip® Bonding Sticks on top.

Add another sheet of plywood on top of the Bonding Sticks then remove the sticks.

TECH

DATA

S Q U A R E M E T R E C O V E R A G E ( m 2 )

P R O P E R T I E S :

A P P L I C A T I O N T Y P E :

O P E N T I M E * * :


S U I T A B L E F O R : P R O P E R T I E S :


O P E N T I M E * * :

S U I T A B L E F O R :

*consult the Spray Manual for a more detailed tutorial on the bonding process *consult the Spray Manual for a more detailed tutorial on the bonding process

**depending on ambient temperature**depending on ambient temperature

TECH

DATA

E P S P L U G B U I L D C O N T A C T A D H E S I V E

TensorGrip® TC30 is a high performance, pressure sensitive, polystyrene compatible adhesive. The TC30 can also be used alongside the TC20 or as a stand-alone product. The incredible tack and compatibility with polystyrene makes this product the perfect partner when bonding blocks of polystyrene together or to the sub-deck. If using this product in conjunction with TC20, it can be applied to the face ends of the large format blocks to give immediate bonding.

U S I N G T C 3 0 *

• Fast, high tack.• High solids.• Polystyrene and EPS compatible.

A D V A N T A G E S

60 minutes

T C 3 0

1 1 0 l t r - n /a

2 2 l t r - 1 8 0 m 2

5 0 0 m l - 8 m 2

1 0 0

2 0 0

3 0 0

4 0 0

5 0 0

6 0 0

2 Sided(2 sided application will result in 50% total coverage)

Web Spray

C O L O U R :

Timber

Polystyrene

MDF

Clear

Spray the sides of the polystyrene block.

Slide another block with all sides coated in TC30 onto the surface.

Repeat for other blocks around the remainder of the structure.

*consult the Spray Manual for a more detailed tutorial on the bonding process

**depending on ambient temperature




O P E N T I M E * * :


B U I L D I N G A P L U G ;T H E T E N S O R G R I P ® W A Y

Watch our step-by-step guides on how to build a plug using TensorGrip® adhesive systems in our online tutorial series.

HOW2

Subscribe to Tensor Global on Youtube for tutorials, product videos and more exclusive content.

T A K E S P E E D A N D A C C U R A C Y T O T H E

N E X T L E V E L

T C 4 1 T C 4 1 C O - R E Z T C 4 2 C O - R E Z T C 4 2 T C 4 3 T C 5 0

TECH

DATA

TECH

DATA

S U P E R H S I N F U S I O N R T M A D H E S I V ETensorGrip® TC42 – designed for the composite infusion mould market, this product is a high performance, solvent-based polymer adhesive in a pressurised canister delivery system. The TC42 is specifically designed to hold reinforcing fibres in place during the infusion process of the resin without affecting the surface finish or structural integrity.

U S I N G T C 4 2 *

• Used for Infusion/Vacuum Forming composites.• Safely fuses laminating materials to structural

core surfaces.• Provides superior holding during forming process.• Allows resin to obtain maximum tensile shear

strength.

A D V A N T A G E S

1 1 0 l t r - n /a

2 2 l t r - 4 4 0 m 2

5 0 0 m l - 8 m 2

1 0 0

2 0 0

3 0 0

4 0 0

5 0 0

6 0 0

FibreglassInfusion

FRP/GRP

MistSpray

C O L O U R :

Green

Thin Fabric

Thick Fabric

1 or 2 sided

15 minutes

T C 4 2I N F U S I O N R T M M O U L D S P R A Y A D H E S I V E

TensorGrip® TC41 – designed for the Composite infusion mould market, this product is a high performance, solvent-based polymer adhesive in a pressurised canister delivery system. The TC41 is specifically designed to hold reinforcing fibres in place during the infusion process of the resin without affecting the surface finish or structural integrity.

U S I N G T C 4 1 *

• Used for Infusion/Vacuum Forming composites.• Safely fuses laminating materials to structural core

surfaces.• Extra long open time.• Provides superior holding during forming process.• Allows resin to obtain maximum tensile shear

strength.

A D V A N T A G E S

1 1 0 l t r - n /a

2 2 l t r - 4 4 0 m 2

5 0 0 m l - 8 m 2

1 0 0

2 0 0

3 0 0

4 0 0

5 0 0

6 0 0

FibreglassInfusion

FRP/GRP

Mist Spray

C O L O U R :

Green

Thin Fabric

Thick Fabric

1 or 2 sided

60 minutes

T C 4 1








O P E N T I M E * * :




O P E N T I M E * * :


Spray one side of the fibreglass mat with TC41.

Bond another uncoated mat to the surface. This can be done immediately after spraying.

Use TC42 for coating overhead mats with adhesive.


M O R E LE S S

CO-REZ TechnologyTM is an exceptional formulation development incorporating a highly engineered resin and

gas matrix. The result; MORE GLUE - LESS GAS.

What this means is an increase of up to 15% extra coverage per unit coupled with a 2-3 kilogram decrease in weight per

canister system. There is nothing else quite like it anywhere on the market!

Combine this exciting new technology with the power of TensorGrip® and we can guarantee that CO-REZTM will

revolutionise your manufacturing process.

Look for the symbol to determine if your canister is a CO-REZTM system.

1 or 2 sided




T C 4 1

1 or 2 sided

15 minutes




O P E N T I M E * * :

T C 4 21 1 0 l t r - n /a

1 3 . 7 l t r - 2 8 0 m 2

1 0 0

3 0 05 0 0

6 0 0 2 0 0

1 0 0

3 0 05 0 0

6 0 0

5 0 0 m l - n /a

4 0 0

1 1 0 l t r - n /a

1 3 . 7 l t r - 2 8 0 m 2

1 0 0

3 0 05 0 0

6 0 0 2 0 0

1 0 0

3 0 05 0 0

6 0 0

5 0 0 m l - n /a

4 0 0

60 minutes

O P E N T I M E * * :

TECH

DATA

TECH

DATA

S U P E R W E B I N F U S I O N S P R A Y A D H E S I V E

TensorGrip® TC43 is a super tacky, heavy mat spray adhesive. Designed to give ultimate grab and performance with minimal adhesive application, for demanding and deep crevice applications. If you have a problem with the latest heavy mats and hull infusion in and around the bow area, the TC43 is the answer!

U S I N G T C 4 3 *

• VOC FREE.• No odour.• Excellent green strength and good heat

resistance.• Good drying time with long open time.

A D V A N T A G E S


FibreglassInfusion

FRP/GRP

Web Spray


C O L O U R :

Clear


Thin Fabric

Thick Fabric

1 or 2 sided

O P E N T I M E * * :

15 minutes

T C 4 3S U P E R F I N E M I S T I N F U S I O N A D H E S I V E

TensorGrip® TC48 is a super fine mist spray adhesive designed for the infusion mould market. This product is a high performance, solvent-based polymer adhesive in a pressurised canister delivery system. TensorGrip® TC48 is specifically designed to hold reinforcing fibres in place during the infusion process of the resin without affecting the surface finish or structural integrity. TC48 is compatible with polyester, styrene and vinyl ester resins and been successfully tested with epoxy resins using less than 9 grams of adhesive per sqm.

U S I N G T C 4 8 *

• Used for Infusion/Vacuum Forming composites.• Safely fuses laminating materials to structural core

surfaces.• Extra fine mist spray.• Provides superior holding during forming process.• Allows resin to obtain maximum tensile shear

strength.• Repositionable.

A D V A N T A G E S


Thick Fabric

Thin Fabric

MistSpray


C O L O U R :

Clear


O P E N T I M E * * :

5 - 10 minutes

T C 4 8

1 1 0 l t r - n /a

2 2 l t r - 5 4 0 m 2

5 0 0 m l - 1 3 m 2

1 0 0

2 0 0

3 0 0

4 0 0

5 0 0

6 0 0

1 1 0 l t r - n /a

1 3 . 7 l t r - 4 4 0 m 2

5 0 0 m l - 8 m 2

3 0 0

4 0 0

5 0 0

6 0 0 2 0 0

1 0 0





Use TC43 for coating overhead HEAVYWEIGHT mats with adhesive.




1 or 2 sided

FiberglassInfusion

TC10 C/S

TC20 S

TC30 C/S

TC41 C/S

TC41 C/S

TC42 C/S

TC42 C/S

TC43 C/S

TC48 C/S

TC50 C/S

P R O D U C T M A T R I X

Aero

sol (

500m

l)

Can

iste

r (13

.7ltr

)

Can

iste

r (22

ltr)

Inte

rmed

iate

(110

ltr)

Gun

Hos

e

Noz

zle

Cle

aner

Styr

ene

Este

r

Viny

lest

er

Poly

este

r

Epox

y

Phen

olic

Peel

Ply

Gla

ss M

at (

Thin

Fab

rics)

Stan

dard

Mat

(Fab

ric)

Hea

vy G

lass

Mat

(Fab

ric)

Mou

ld D

eck

Sub

Bas

e B

uild

ups

Poly

styr

ene

to P

lyw

ood

Poly

styr

ene

to P

olys

tyre

ne

Bal

sa W

ood

Cor

e

PU F

oam

Cor

e

PET

Foam

Cor

e

H

- Black Rubber Hose- Stainless Steel Hose- HT Hose

HOSES

- Professional Gun- Wand GunGUNS

C O M P O S I T E R A N G E

NOZZLES

- Lechler- 4001- 6501- 8002- 9501- 650067

- TensorGrip® C101- TensorGrip® S105CLEANERS

E P O X Y I N F U S I O N / R T M S P R A Y A D H E S I V E

TensorGrip® TC50 is a fast dry epoxy mist spray adhesive. TC50 is designed specifically to hold carbon fabrics in place during infusion processes. It should be used in both one sided and two sided applications.

U S I N G T C 5 0 *

• 100% compatible with epoxy infusion.• Incredible grab.• Good heat resistance.• High solids.• Easy application control.• Versatile.• Economic.

A D V A N T A G E S


FibreglassInfusion

FRP/GRP

MistSpray


C O L O U R :

Clear


O P E N T I M E * * :

5 - 10 minutes

T C 5 0

1 1 0 l t r - n /a

1 3 . 7 l t r - 4 5 0 m 2

5 0 0 m l - n /a

3 0 05 0 0

6 0 0

3 0 0

4 0 0

5 0 0

6 0 0 2 0 0

1 0 0





1 or 2 sided

G E T S TA R TE D .

Using TensorGrip® is more than simply using an adhesive canister; it is having everything that you need to create that

unbeatable bond in as simple a fashion as possible.

Inside this box lies the key to reaching the optimum potential of TensorGrip®, bringing your work to new heights of quality and

efficiency, all the while incurring absolutely no additional cost to your first canister purchase*. We are proud to introduce the

TensorGrip® Kick Off Kit.

This unique package comes with all of the essential tools for bonding, including a Professional Spray Gun, Hose, Gun Tip,

Roller and a Tensor-branded Ball. Everything to ensure that you are getting the very best out of our adhesives.

E a c h K I C K O F F K I T c o n t a i n s :

Profess iona l Gun

4 Met re Hose

75mm Rol ler Tensor Gr ip ®

Footba l l

N E V E R LO O KB AC K .

For more in format ion v is i t :w w w.tensorglobal .com /uk

C O N T A C T U S

Unit 1, Ruthvenfield AvenueInveralmond Industrial EstatePerth, United KingdomPH1 3WB


Before using the product, the user should carry out any necessary tests in order to ensure that the product is suitable for the intended application. Moreover, all users should contact the seller or the manufacturer of the product for additional technical information concerning its use if they think that the information in their possession needs to be clarified in any way, whether for normal use or a specific application of our product. Our guarantee applies within the context of the statutory regulations and provisions in force, current professional standards and in accordance with the stipulations set out in our general sales conditions. The information detailed in the present technical data sheet is given by way of indication and is not exhaustive. The same applies to any information provided verbally by telephone to any prospective or existing customer.

D I S C L A I M E R

Copyright © 2018 by Quin Global UK LtdAll rights reserved. This publication or any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of the publisher. Printed in the UK


[email protected]+44 (0) 845 381 2233

@QUINGLOBALUK

composite adhesives - tensor global

Documents