composite resin developments limited introduces compensators designed for glass reinforced pipes
DESCRIPTION
Composite Resin Developments Limited Introduces Compensators designed for Glass Reinforced Pipes. CRD Innovation. For the Ship Owner Operational Advantages Compensates for differential movement between hull and pipes: Compensates for different coefficients of expansion: - PowerPoint PPT PresentationTRANSCRIPT
Composite Resin Developments LimitedIntroduces
Compensators designed for Glass Reinforced Pipes
CRD InnovationCompensators designed for Pipes
For the Ship OwnerOperational Advantages•Compensates for differential movement between hull and pipes:•Compensates for different coefficients of expansion:•Reduces noise and fatigue failure:
Eliminates many “in service” failures
For the Ship BuilderInstallation Advantages•Provides linear, angular and axial flexibility:•Delimits pipe run limitations:•Extends permissible dimensional tolerances:
Speeds construction –
Eliminates many budget overruns
Classification Society Type Approvals for Marine and Offshore Use
Composite Resin Developments Ltd
Compensator Range suitable for Marine, Offshore and Land Based Applications
ERV Yellow Steel
ERV Red
ERV Yellow
Other materials available
Butyl/EPDM
NBR
NBR + Steel Reinforcement
Petroleum based products, High Octane Fuel, contaminated sea water
As yellow band – approved for use in machinery spaces
Viton, PTFE, and others
Technical information on request
ERV RedDrinking, cold, warm and waste water; sea water; ; Grey & Black Water, Ballast, Fire Mains; HVAC
Other materials
Standard Size Range 1.0 in (25mm) – 12 in (300mm)
Special compensators include circular up to 160 in (4000 mm); square; rectangular and square to circular configurations.
Moulded Flanges Standards: ANSI; DIN; ISO, BS and JIS
By
Composite Resin Developments LimitedUsing Proven High Performance reinforced Isotropic
Epoxy Resin Systems
Outstanding Corrosion Resistance Significant Weight Savings
Lower Costs
Composite Resin Developments Ltd
Composite Resin Developments Ltd Standard Range
Standard Bellows
25 mm – 1000 mm NB
Full Bellow Range to 4,000 mm
Tied Bellows25 mm – 1000 mm NB
Full Bellow Range to 4,000 mm
Composite Resin Developments Ltd Standard Range
Angular Rotation
+/- 30°
+/- 20°
+/- 12°
+/- 8°
+/- 5°
DN 25-80
DN 100-150
DN 200-300
DN 350-600
DN 700-1000
Minimum
- 30 mm
- 30 mm
- 30 mm
- 40 mm
- 40 mm
Maximum
+ 30 mm
+ 30 mm
+30 mm
+35 mm
+35 mm
Lateral Offset
+/- 20 mm
+/- 20 mm
+/- 20 mm
+/- 20 mm
+/- 20 mm
Configurations are available to provide greater angular rotation if required.
Composite Resin Developments Ltd
• Example of estimated service life for a one type of polymer/reinforcement combination. Similar information is available for all materials offered.
•
Service time in years ½ 1 2 3 4 5 6 7 8 9 10 15 20
80
60
40
20
Average insertion loss across frequency range Noise level reduction
Pipe Runs where required
Cross Deck-head Compensator
Composite Resin Developments Ltd
Composite Resin Developments Ltd Special Developments
Multi-arch compensators: For added linear; lateral offset and angular rotations.
Composite Resin Developments Ltd Future Developments
Stub Flanges for rapid pipe to flange connection
Composite Resin Developments Ltd
Wherever corrosion resistance and weight savings
at economic costs are issues
The Components Division ofComposite Resin Developments Limited
can provide solutions – just contact
Neil Huntley on +44.1843.223045
Unit J1G Channel Road, Westwood Industrial Estate
Margate, CT9 4JS, England
T; +44.1843.223045 e-mail: [email protected], Web: www.compresdev.co.uk