compressed gas equipment - thomasnetcdn.thomasnet.com/ccp/01313857/131295.pdf · 4" diameter...
TRANSCRIPT
Compressed GasEquipment
“AV” Series Acetylene Valve 01“AVB & AVMC” Series Acetylene Valves 03“AV” Series for “WB”Acetylene Valves 5“BV” Series Hi/Lo Valves 71210 - 1214 Series Chlorine Container Valves 9Chlorine Valve Accessories 10“DF” Series Dual Outlet Valves 11“JV” Series O-Ring Style Industrial and Chrome Plated Valves 13“KVA” Series Post Type Medical Valves 17SHERCheck® “TV” Series Residual Pressure Back Check Valves 19“TV” Series Manifold Valves 21“TV” Series Acetylene Valves 25“TV” Series Industrial and Chrome Plated Valves 27“YV & YVA” Series Line and Panel Valves 31“YVB” Series Vertical Outlet Medical Oxygen Valves 33Fusible Plugs, Manifold Connectors 35
TABLE OF CONTENTS PRODUCT INFORMATION AND ORDERING1-888-50VALVE (508-2583)
1-888-50VALVE (508-2583)
1
AV SeriesWrench-operated Acetylene Valves
• Valve body made from rugged forgingbrass, precisely machined and gauged to help ensure long service life
• Valve body designed with large wrench flats for easy installation
• Large wrench flats on packing nut for easy tightening
• One-piece Chevron-shaped, pre-formedPolyethylene packing design ensures apositive leak-resistant seal
• One-piece steel stem is cold-rolled and plated to resist corrosion
• Stem shank is 1⁄2" diameter with 3⁄4" diameter thread, helping to ensure long life
• Stem point machined to close tolerances and micro-finish to ensure concentricityfor a leak-tight seal
AV SeriesAcetylene Valves
Sherwood Cylinder Valve Ordering Chart
Sherwood and the “SS” symbol are trademarks of Sherwood, Harsco Corporation, Gas and Fluid Control GroupAll other names are trademarks of their respective owners.
© 2000 Sherwood, Harsco Corporation, Gas and Fluid Control Group T-CGO200097
2
AV SERIES - WRENCH -OPERATED ACETYLENE VALVES
Sherwood CGA Outlet InletPart Number Outlet Thread Size Thread Size
Number
AV3040 300 .825-14 NGO RH Ext. 1⁄2-14 NGT(Commercial)
AV3060 300 .825-14 NGO RH Ext. 3⁄4-14 NGT(Commercial)
AV3080 300 .825-14 NGO RH Ext. 1-111⁄2 NGT(Commercial)
AV5140 510 .885-14 NGO LH Int. 1⁄2-14 NGT(P.O.L.)
AV5160 510 .885-14 NGO LH Int. 3⁄4-14 NGT(P.O.L.)
AV5180 510 .885-14 NGO LH Int. 1-111⁄2 NGT(P.O.L.)
• For technical information refer to Technical Section, page 1.
• Available on request:
- Outlet caps and plugs with or without chain and rings.
- Valves conforming to Department of Defense Specification MIL-DTL-2E.
3
AVB and AVMC Series Acetylene Valves
AVB and AVMC SeriesWrench-operated Acetylene Valves
• Valve body made from rugged forgingbrass, precisely machined and gaugedto ensure long service life
• Fusible metal pressure relief device castdirectly into valve body for maximumretainment and cylinder protection
• Large wrench flats on valve body for easy installation
• Nylon insert in packing nut resistsloosening and does not damage valvebody threads
• Tough carbon steel alloy stem is as strong as stainless steel
• State-of-the-art corrosion-resistantplating on stem aids in maximumprotection
• New Teflon® packing lasts up to tentimes longer than graphite material
• Teflon packing has compression“memory,” reducing need for repetitivebonnet tightening
1-888-50VALVE (508-2583)
Sherwood and the “SS” symbol are trademarks of Sherwood, Harsco Corporation, Gas and Fluid Control GroupAll other names are trademarks of their respective owners.
© 2000 Sherwood, Harsco Corporation, Gas and Fluid Control Group
4
T-CG02NN97
Sherwood Cylinder Valve Ordering Chart
“AVB” AND “AVMC” SERIES - WRENCH OPERATED ACETYLENE VALVES
Sherwood CGA Outlet Inlet FusiblePart Number Outlet Thread Size Thread Size Metal
Number
AVB521 520 .895-18 NGO RH Ext. 3⁄8-18 NGT 212° F
AVB521S* 520 .895-18 NGO RH Ext. 3⁄8-18 NGT None
AVMC201 200 .625-20 NGO RH Ext. 3⁄8-18 NGT 212° F
AVMC201S* 200 .625-20 NGO RH Ext. 3⁄8-18 NGT None
* Valves are supplied standard with inlet screen and red-colored bonnet for manifold service.
• For technical information refer to Technical Section, page 3.
• Available on request:
- Stainless steel stems: To order, add “_ ” to end of part number.
ex: AVB521 becomes AVB521_
- 3,4,7, and 10 threads oversize and 3 threads undersize inlets: To order, add -3,-4,-7,-10 or -3U/S to endof part number.
ex: -3 threads undersize - AVB521 becomes AVB521-3U/S.
-3 threads oversize - AVB521 becomes AVB521-3
5
AV SeriesWB Acetylene Valves
AV SeriesWrench-operated Valve for “WB” Style AcetyleneCylinders
• Valve body made from rugged forgingbrass, precisely machined and gaugedto help ensure long service life
• Durable, corrosion-resistant stainlesssteel stem is machined to closetolerances and micro-finished for easysealing, smooth operation and long life
• Conical micro-finished stem nose allowsa wiping action on the valve body seat,helping to remove contamination andensure a positive gas shut-off
• Internal tamper-resistant packing nutrequires a special tool for removal andinstallation
• Chevron-shaped multiple packing designensures a positive leak-resistant seal
• Vertical outlet and angled chamberprovide easy access and operationinside of protective cylinder collar
1-888-50VALVE (508-2583)
Sherwood Cylinder Valve Ordering Chart
Sherwood and the “SS” symbol are trademarks of Sherwood, Harsco Corporation, Gas and Fluid Control GroupAll other names are trademarks of their respective owners.
© 2000 Sherwood, Harsco Corporation, Gas and Fluid Control Group
6
T-CG02PP97
AV SERIES - WRENCH OPERATED VALVES FOR “WB” STYLE ACETYLENE CYLINDERS
Sherwood CGA Outlet InletPart Number Outlet Thread Size Thread Size
Number
AV5160WB 510 .885-14 NGO LH Int. 3⁄4-14 NGT-STD
AV5160WB-3 510 .885-14 NGO LH Int. 3⁄4-14 NGT- 3 Threads Oversize
AV5160WB-3U/S 510 .885-14 NGO LH Int. 3⁄4-14 NGT - 3 Threads Undersize
AV5160WB-6 510 .885-14 NG0 LH Int. 3⁄4-14 NGT- 6 Threads Oversize
AV5160WB-6 U/S 510 .885-14 NGO LH Int. 3⁄4-14 NGT- 6 Threads Undersize
AV5160WB-9 510 .885-14 NGO LH Int. 3⁄4-14 NGT - 9 Threads Oversize
• For technical information refer to Technical Section, page 5.
7
BV SeriesHi/Lo Valves
BV SeriesHi/Lo Pressure Regulating Dual Outlet Valves
• Integral regulator reduces gas pressureto the CGA-designated 3000 psig max.outlet to 700-1000 psig, allowing for useof a UL®-rated 3000 psig regulator withthe larger capacity lightweight highpressure cylinders
• Unique dual outlet design allows use oflower or higher cylinder service pressurefrom the same valve/cylinder package
• No special filling or withdrawal adaptersneeded
• Strong, durable forged brass bodymanufactured by Sherwood tospecifications stricter than mostcommercial forging specifications
• High-temperature aluminum alloyhandwheel with large drainage holes
• Integral stainless steel tang helpsprevent internal stem breakage
• Durable lower plug made of tough navalbrass resists wear
• Lower plug is Teflon®-coated to addlubricity, which minimizes seizing andgalling especially under high pressureoperation
• Internally threaded chamber designpromotes longer life and helps protectvalve body chamber threads fromdamage
• Nickel 201 rupture disc resistspremature rupture that may be causedby corrosive ambient environments
• Precise, quality machining results inexceptional finishes for low torquesealing and long packing life
• Inert Teflon packing provides leak-freestem seal, long cycle life and resistanceto corrosion
• Handwheel nut coated with corrosion-resistant chromate/zinc organic plating
• Regulator designed for long service life.Cycle tested to in excess of 16,000cycles
• Pressure Relief Device strategicallylocated in regulated pressure outletprevents cylinder pressure from reachingdownstream equipment in the remoteevent of a catastrophic regulator failure
1-888-50VALVE (508-2583)
Sherwood Cylinder Valve Ordering Chart
Sherwood and the “SS” symbol are trademarks of Sherwood, Harsco Corporation, Gas and Fluid Control GroupAll other names are trademarks of their respective owners.
© 2000 Sherwood, Harsco Corporation, Gas and Fluid Control Group
8
T-CG06B97
BV SERIES, HI/LO PRESSURE REGULATING, DUAL OUTLET CYLINDER VALVES
Gas Service Air Inert Gases Oxygen
Valve Part No. BV34761-65-346 BV6861-65-580T BV70161-65-540
Regulated Outlet CGA346 CGA580 CGA540.825-14 NGO RH Ext. .965-14 NGO RH Int. .903-14 NGO RH Ext
High Pressure CGA347 CGA680 CGA701Outlet/Fill Port .825-14 NGO RH Ext 1.045-14 NGO RH Int. 1.103-14 NGO RH Ext
Long Nipple
Regulated Outlet 700-1100 psig 700-1100 psig 700-1100 psigPressure @4500 psig Inlet @4500 psig Inlet @4500 psig Inlet
High Pressure 5,500 psi Max 5,500 psi Max 5,500 psi MaxOutlet Pressure Rating
Inlet Size 3⁄4-14 NGT 3⁄4-14 NGT 3⁄4-14 NGT24 Threads Oversize 24 Threads Oversize 24 Threads Oversize
• Pressure Relief Device supplied standard for 4,500 psig cylinder with a test pressure Of 1.5 Times Service Pressure.
• Regulated Outlet Pressure Relief Device rupture pressure is 2800 - 3000 psig .
• High pressure outlet plug removal tool supplied separately to cylinder filling plants only. To order use part number 680PW-2.
• Valves with other size inlets and outlets are special production. Please call Sherwood for availability.
• For technical information refer to technical section, page 7.
1-888-50VALVE (508-2583)
9
1210 – 1214 SeriesChlorine Cylinder and Container Valves
1210-1214 SeriesWrench-Operated ChlorineCylinder and Container Valves
• Valves made in strict compliance withthe standards and specifications of the Chlorine Institute
• Valve bodies forged from corrosion-resistant aluminum silicon bronze alloy “B”
• Strong, chlorine-compatible Monel®
stems for long valve service
• Stem seal packing recognized by theChlorine Institute
• Brass outlet cap with teflon® insertincluded for outlet thread protection
• Chlorine valves are available with BS341, DIN 477, JIS and other internationalthread standards
Sherwood Cylinder Valve Ordering Chart
Sherwood and the “SS” symbol are trademarks of Sherwood, Harsco Corporation, Gas and Fluid Control GroupAll other names are trademarks of their respective owners.
© 2000 Sherwood, Harsco corporation, Gas and Fluid Control Group CHLV-2000BR
9.1
1210-1214 SERIES CHLORINE VALVES
CGA Outlet Inlet Pressure StemPart Number Outlet No. Thread Size Thread Size Relief Device Packing1210-B1 820 1.030-14 RH 3⁄4-14 NGT CL-1 165° F Garlock1210-B2 820 1.030-14 RH 3⁄4-14 NGT CL-2 165° F Garlock1210-B3 820 1.030-14 RH 3⁄4-14 NGT CL-3 165° F Garlock1210-B4 820 1.030-14 RH 3⁄4-14 NGT CL-4 165° F Garlock1210-B5 820 1.030-14 RH 3⁄4-14 NGT CL-5 165° F Garlock1210X1-B1 820 1.030-14 RH 3⁄4-14 NGT CL-1 165° F Teflon®
1210X1-B2 820 1.030-14 RH 3⁄4-14 NGT CL-2 165° F Teflon®
1210X1-B3 820 1.030-14 RH 3⁄4-14 NGT CL-3 165° F Teflon®
1210X1-B4 820 1.030-14 RH 3⁄4-14 NGT CL-4 165° F Teflon®
1210X1-B5 820 1.030-14 RH 3⁄4-14 NGT CL-5 165° F Teflon®
1211-B1 820 1.030-14 RH 1-111⁄2 NGT CL-1 165° F Garlock1211-B2 820 1.030-14 RH 1-111⁄2 NGT CL-2 165° F Garlock1211-B3 820 1.030-14 RH 1-111⁄2 NGT CL-3 165° F Garlock1211-B4 820 1.030-14 RH 1-111⁄2 NGT CL-4 165° F Garlock1211-B5 820 1.030-14 RH 1-111⁄2 NGT CL-5 165° F Garlock1211X1-B1 820 1.030-14 RH 1-111⁄2 NGT CL-1 165° F Teflon®
1211X1-B2 820 1.030-14 RH 1-111⁄2 NGT CL-2 165° F Teflon®
1211X1-B3 820 1.030-14 RH 1-111⁄2 NGT CL-3 165° F Teflon®
1211X1-B4 820 1.030-14 RH 1-111⁄2 NGT CL-4 165° F Teflon®
1211X1-B5 820 1.030-14 RH 1-111⁄2 NGT CL-5 165° F Teflon®
1214-B1 820 1.030-14 RH 3⁄4-14 NGT CL-1 None Garlock1214-B2 820 1.030-14 RH 3⁄4-14 NGT CL-2 None Garlock1214-B3 820 1.030-14 RH 3⁄4-14 NGT CL-3 None Garlock1214-B4 820 1.030-14 RH 3⁄4-14 NGT CL-4 None Garlock1214-B5 820 1.030-14 RH 3⁄4-14 NGT CL-5 None Garlock1214X1-B1 820 1.030-14 RH 3⁄4-14 NGT CL-1 None Teflon®
1214X1-B2 820 1.030-14 RH 3⁄4-14 NGT CL-2 None Teflon®
1214X1-B3 820 1.030-14 RH 3⁄4-14 NGT CL-3 None Teflon®
1214X1-B4 820 1.030-14 RH 3⁄4-14 NGT CL-4 None Teflon®
1214X1-B5 820 1.030-14 RH 3⁄4-14 NGT CL-5 None Teflon®
1209-B1 820 1.030-14 RH 1-111⁄2 NGT CL-1 None Garlock1209-B2 820 1.030-14 RH 1-111⁄2 NGT CL-2 None Garlock1209-B3 820 1.030-14 RH 1-111⁄2 NGT CL-3 None Garlock1209-B4 820 1.030-14 RH 1-111⁄2 NGT CL-4 None Garlock1209-B5 820 1.030-14 RH 1-111⁄2 NGT CL-5 None Garlock1209X1-B1 820 1.030-14 RH 1-111⁄2 NGT CL-1 None Teflon®
1209X1-B2 820 1.030-14 RH 1-111⁄2 NGT CL-2 None Teflon®
1209X1-B3 820 1.030-14 RH 1-111⁄2 NGT CL-3 None Teflon®
1209X1-B4 820 1.030-14 RH 1-111⁄2 NGT CL-4 None Teflon®
1209X1-B5 820 1.030-14 RH 1-111⁄2 NGT CL-5 None Teflon®
• Ton container valves (1214 series) do not require a safety device.
• Chlorine valves accept outlet yoke Type 628 with appropriate adapters (see Chlorine Accessories).
• For technical information refer to technical section, page 11
1-888-50VALVE (508-2583)
10
Chlorine Valve Accessories
5853T and 1333 Fusible MetalPlugs for Chlorine Valves
• Fusible metal plugs manufactured inaccordance with Chlorine Institutespecifications
• Fusible metal melting at 158-165°F
• Type 5853T has 7⁄32" clear opening, 7⁄16"Hex and 1⁄8"-27 NGT external thread
• Type 1333 has 11⁄32" clear opening, 11⁄4"Hex and 3⁄4"-14 NGT C1 external thread
• Made from Chlorine Institute recognizedNaval Brass and fusible alloy
628 Chlorine Yoke
• Made in compliance withChlorine Institutespecifications
• Made from steel with a platedfinish
1534 Reseating Tool (notshown)
• Manually operated
• Increases valve service
6414 Flexible Line Connectors
• 3⁄8" OD zinc-plated copper
• Maximum working pressure of 500 psig
635 Chlorine Wrenches
• Forged steel construction
• Designed for use with all standardchlorine cylinder and container valvesand yokes
5888 High Flow Yoke Adapters
• Use with P10-CLAL outlet gasket
Sherwood Cylinder Valve Ordering Chart
Sherwood and the “SS” symbol are trademarks of Sherwood, Harsco Corporation, Gas and Fluid Control GroupAll other names are trademarks of their respective owners.
© 2000 Sherwood,Harsco Corporation, Gas and Fluid Control Group CHLA-2000BR
10.1
6414 FLEXIBLE LINE CONNECTORS
Part Number Thread Size Length6414C CGA 820 (Both Ends) 6 ft.6414X1C CGA 820 (Both Ends) 10 ft.6414X2C CGA 820 (Both Ends) 4 ft.6414X7C CGA 820 X 5⁄8"-18 UNF 6 ft.6414X8C 5⁄8"-18" UNF (Both Ends) 4 ft.6414X9C 5⁄8"-18" UNF (Both Ends) 6 ft.6414X10C CGA 820 X 5⁄8"-18 UNF 4 ft.
5888 HIGH FLOW YOKE ADAPTERS
Part Number Size5888-6 3⁄8" SAE Flare5888-6S 3⁄8" ODS5888-8 1⁄2" SAE5888-D 1⁄2" 14NPT (Male)5888-E 1.030" -145910 Union Outlet Adapter
635 CHLORINE WRENCHES
Part Number Size635 11⁄4" open end, 3⁄8" stem square, straight shaft635X3 11⁄4" open end, 3⁄8" stem square, twisted shaft
5853T FUSIBLE METAL PLUGS
Part Number Thread Size First Thread Diameter5853T 1⁄8" – 27 NGT 0.3931" (standard)5853X1T 1⁄8" – 27 NGT (oversize)
1333 FUSIBLE METAL PLUGS
Part Number Thread Size First Thread Diameter1333-N1 3⁄4" – 14 NGT CL-1 1.0248" (standard)1333-N2 3⁄4" – 14 NGT CL-2 1.0427" (.0179" oversize)1333-N3 3⁄4" – 14 NGT CL-3 1.0628" (.038" oversize)1333-N4 3⁄4" – 14 NGT CL-4 1.0873" (.0625" oversize)1333-N5 3⁄4" – 14 NGT CL-5 1.1498" (.125" oversize)1303-N1 1"-111⁄2 NGT CL-1 1.283" (standard)1303-N2 1"-111⁄2 NGT CL-2 1.301" (.0179" oversize)1303-N3 1"-111⁄2 NGT CL-3 1.321" (.038" oversize)1303-N4 1"-111⁄2 NGT CL-4 1.3455" (.0625" oversize)1303-N5 1"-111⁄2 NGT CL-5 1.408" (.125" oversize)
11
DF Series Dual Outlet Valves
DF SeriesPacked Dual Outlet Valves forManifolding Applications
• Dual outlet design allows manifoldingwithout use of adapters or tees,eliminating multiple joints
• Location of outlets above valve seatallows individual cylinder isolationwithout shutting off manifold
• Strong, durable forged brass bodymanufactured by Sherwood tospecifications stricter than mostcommercial forging specifications
• High-temperature aluminum alloyhandwheel with large drainage holes
• Integral stainless steel tang helpsprevent internal stem breakage
• Durable lower plug made of tough navalbrass resists wear
• Lower plug is Teflon®-coated to add lubricity, which minimizes seizingand galling especially under highpressure operation
• Internally threaded chamber designpromotes longer life and helps protectvalve body chamber threads fromdamage
• Nickel 201 rupture disc resistspremature rupture that may be causedby corrosive ambient environments
• Precise, quality machining results inexceptional finishes for low torquesealing and long packing life
• Inert Teflon packing provides leak-freestem seal, long cycle life and resistanceto corrosion
• Handwheel nut coated with corrosion-resistant chromate/zinc organic plating
1-888-50VALVE (508-2583)
Sherwood Cylinder Valve Ordering Chart
Sherwood and the “SS” symbol are trademarks of Sherwood, Harsco Corporation, Gas and Fluid Control GroupAll other names are trademarks of their respective owners.
© 2000 Sherwood, Harsco Corporation, Gas and Fluid Control Group
12
T-CG02YY97
DF SERIES - PACKED DUAL OUTLET VALVES FOR MANIFOLDING APPLICATIONS
Gas Outlet Part Number Outlet InletService Orientation Number Of Outlets Thread Size Thread Size
Air Horizontal DF11551-XXHFKF 1.125 UNF2A StraightOxygen Vertical DF11651-XXFKF Two 1⁄4-18 NPT 1.125 UNF2A StraightInert Gas Horizontal DF11561-XXHFKF 180° Apart Female 3⁄4-14 NGT Tapered
Vertical DF11661-XXFKF 3⁄4-14 NGT Tapered
CNG Horizontal DF11555-XXHFKF 1.125 UNF2A StraightHydrogen Vertical DF11655-XXFKF Two 1⁄4-18 NPT 3⁄4-14 NGT TaperedMethane Horizontal DF11565-XXHFKF 180° Apart Female 3⁄4-14 NGT Tapered
Vertical DF11665-XXFKF 3⁄4-14 NGT Tapered
Air Vertical TV10451-XXFKF One 1⁄4-18 NPT 1.125 UNF2A StraightOxygen TV10461-XXFKF Female 3⁄4-14 NGT TaperedInert Gas
CNG Vertical TV10455-XXFKF One 1⁄4-18 NPT 1.125 UNF2A StraightHydrogen TV10465-XXFKF Female 3⁄4-14 NGT TaperedMethane
• XX - Denotes Pressure Relief Device burst disc rupture pressure. See page xix for part number suffix.
• For technical information refer to Technical Section, page 13.
13
JV SeriesO-Ring Style Industrial and Chrome Plated Valves
JV SeriesO-Ring Seal Industrial Valves
• Very easy operating. Ideal for laboratoryor medical applications.
• Unique O-Ring chamber design prolongsservice life by allowing low torqueoperation while helping to create adependable seal
• Strong, durable forged brass bodymanufactured by Sherwood tospecifications stricter than mostcommercial forging specifications
• High-temperature aluminum alloyhandwheel with large drainage holes
• Integral stainless steel tang helpsprevent internal stem breakage
• Durable lower plug made of tough navalbrass resists wear
• Lower plug is Teflon®-coated to addlubricity, which minimizes seizing andgalling especially under high pressureoperation
• Internally threaded chamber designpromotes longer life and helps protectvalve body chamber threads fromdamage
• Nickel 201 rupture disc resistspremature rupture that may be causedby corrosive ambient environments
• Precise, quality machining results inexceptional finishes for low torquesealing and long packing life
1-888-50VALVE (508-2583)
Sherwood Cylinder Valve Ordering Chart
Sherwood and the “SS” symbol are trademarks of Sherwood, Harsco Corporation, Gas and Fluid Control GroupAll other names are trademarks of their respective owners.
© 2000 Sherwood, Harsco Corporation, Gas and Fluid Control Group
14
JV SERIES - O-RING SEAL INDUSTRIAL VALVES
Gas CGA Pin Indexing Inlet SherwoodService Outlet Hole Numbers Thread Size Part Number
Number
Air (R729)0 psi TO 3,000 psi 346 .825-14 NGO RH Ext. 1⁄2 -14 NGT JV34641-XX
3⁄4 -14 NGT JV34661-XX1 -111⁄2 NGT JV34681-XX.750 -16UNF JV34651-XX-751,125 -12UNF JV34651-XX
3,001 psi TO 5,500 psi 347 .825-14 NGO RH Ext. 3⁄4 -14 NGT JV34761-XX(Long Nipple)
5,501 psi TO 7,500 psi 702 1.125-14 NGO RH Int. 3⁄4 -14 NGT JV70261-XX
Argon0 psi TO 3,000 psi 580 .965-14 NGO RH Int. 1⁄2 - 14 NGT JV5841-XX
3⁄4 -14 NGT JV5861-XX1 -111⁄2 NGT JV5881-XX.750 -16UNF JV5851-XX-751.125 -12UNF JV5851-XX
3,001 psi TO 5,500 psi 680 1.045-14 NGO RH Int. 3⁄4 -14 NGT JV68061-XX5,501 psi TO 7,500 psi 677 1.030-14 NGO LH Ext. 3⁄4 -14 NGT JV67761-XX
Butane/Propane 555 .903-14 NGO LH Ext. 1⁄2 -14 NGT JV55541-XXLiquid Withdrawal 3⁄4 -14 NGT JV55561-XX
1 -111⁄2 NGT JV55581-XX.750 -16UNF JV55551-XX-751.125 -12UNF JV55551-XX
Carbon Dioxide (R744) 320 .825-14 NGO RH Ext. 1⁄2 -14 NGT JV3241-XX3⁄4 -14 NGT JV3261-XX1 -111⁄2 NGT JV3281-XX.750 -16UNF JV3251-XX-751.125 -12UNF JV3251-XX
Carbon Monoxide 350 .825-14 NGO LH Ext. 1⁄2 -14 NGT JV3545-XX0 psig TO 3,000 psig 3⁄4 -14 NGT JV3565-XX
1-111⁄2 NGT JV3585-XX.750 -16UNF JV3555-XX-751.125 -12UNF JV3555-XX
3,001 psi TO 5,500 psi 695 1.045-14 NGO LH Int. 3⁄4 -14 NGT JV69565-XX5,501 psi TO 7,500 psi 703 1.125-14 NGO LH Int. 3⁄4 -14 NGT JV70365-XX
1,2 Dichloroethylene 660 1.030-14 NGO RH Ext. 1⁄2 -14 NGT JV6640(R1130) (Face Washer) 3⁄4 -14 NGT JV6660
1 -111⁄2 NGT JV6680.750 -16UNF JV6650-751.125 -12UNF JV6650
Helium0 psi TO 3,000 psi 580 .965-14 NGO RH Int. 1⁄2 -14 NGT JV5841-XX
3⁄4 -14 NGT JV5861-XX1 -111⁄2 NGT JV5881-XX.750 -16 UNF JV5851-XX-751.125 -12 UNF JV5851-XX
3,001 psi TO 5,500 psi 680 1.045-14 NGO RH Int. 3⁄4 -14 NGT JV68061-XX5,501 psi TO 7,500 psi 677 1.030-14 NGO LH Ext. 3⁄4 -14 NGT JV67761-XX
T-CG02SS97
Sherwood Cylinder Valve Ordering Chart
15
JV SERIES - O-RING SEAL INDUSTRIAL VALVES
Gas CGA Pin Indexing Inlet SherwoodService Outlet Hole Numbers Thread Size Part Number
Number
Hydrogen0 psi TO 3,000 psi 350 .825 -14 NGO RH Ext. 1⁄2 -14 NGT JV3545-XX
3⁄4 -14 NGT JV3565-XX1 -111⁄2 NGT JV3585-XX.750 -16UNF JV3555-XX-751.125-12UNF JV3555-XX
3,001 psi TO 5,500 psi 695 1.045 -14 NGO LH Int. 3⁄4 -14 NGT JV69565-XX5,501 psi TO 7,500 psi 703 1.125 -14 NGO LH Int. 3⁄4 -14 NGT JV70365-XX
Krypton0 psi TO 3,000 psi 580 .965 -14 NGO RH Int. 1⁄2 -14 NGT JV5841-XX
3⁄4 -14 NGT JV5861-XX1 -111⁄2 NGT JV5881-XX.750 -16UNF JV5851-XX-751.125 -12UNF JV5851-XX
3,001 psi TO 5,500 psi 680 1.045 -14 NGO RH Int. 3⁄4 -14 NGT JV68061-XX5,501 psi TO 7,500 psi 677 1.030 -14 NGO LH Ext. 3⁄4 -14 NGT JV67761-XX
Methane (R50)0 psi TO 3,000 psi 350 .825 -14 NGO LH Ext. 1⁄2 -14 NGT JV3545-XX
3⁄4 -14 NGT JV3565-XX1 -111⁄2 NGT JV3585-XX.750 -16 UNF JV3555-XX-751.125 -12 UNF JV3555-XX
3,001 psi TO 5,500 psi 695 1.045 -14 NGO LH Int. 3⁄4 -14 NGT JV69565-XX5,501 psi TO 7,500 psi 703 1.125 -14 NGO LH Int. 3⁄4 -14 NGT JV70365-XX
Natural Gas0 psi TO 3,000 psi 350 .825 -14 NGO LH Ext.. 1⁄2 -14 NGT JV3545-XX
3⁄4-14 NGT JV3565-XX1-111⁄2 NGT JV3585-XX.750 -16 UNF JV3555-XX-751.125 -12 UNF JV3555-XX
3,001 psi TO 5,500 psi 695 1.045 -14 NGO LH Int. 3⁄4 -14 NGT JV69565-XX5,501 psi TO 7,500 psi 703 1.125 -14 NGO LH Int. 3⁄4 -14 NGT JV70365-XX
Neon0 psi TO 3,000 psi 580 .965 -14 NGO RH Int. 1⁄2 -14 NGT JV5841-XX
3⁄4 -14 NGT JV5861-XX1 -111⁄2 NGT JV5881-XX.750 -16 UNF JV5851-XX-751.125 -12 UNF JV5851-XX
3,001 psi TO 5,500 psi 680 1.045 -14 NGO RH Int. 3⁄4 -14 NGT JV68061-XX5,501 psi TO 7,500 psi 677 1.030 -14 NGO LH Ext. 3⁄4 -14 NGT JV67761-XX
Nitrogen0 psi TO 3,000 psi 580 .965 -14 NGO RH Int. 1⁄2 -14 NGT JV5841-XX
3⁄4 -14 NGT JV5861-XX1 -111⁄2 NGT JV5881-XX.750 -16UNF JV5851-XX-751.125 -12UNF JV5851-XX
3,001 psi TO 5,500 psi 680 1.045 -14 NGO RH Int. 3⁄4 -14 NGT JV68061-XX5,501 psi TO 7,500 psi 677 1.030 -14 NGO LH Ext. 3⁄4 -14 NGT JV67761-XX
Sherwood Cylinder Valve Ordering Chart
Sherwood and the “SS” symbol are trademarks of Sherwood, Harsco Corporation, Gas and Fluid Control GroupAll other names are trademarks of their respective owners.
© 2000 Sherwood, Harsco Corporation, Gas and Fluid Control Group
16
T-CG02SS97
JV SERIES - O-RING SEAL INDUSTRIAL VALVES
Gas CGA Pin Indexing Inlet SherwoodService Outlet Hole Numbers Thread Size Part Number
Number
Nitrous Oxide (R744a) 326 .825 -14 NGO RH Ext.. 1⁄2 -14 NGT JV32641-XX(Small round 3⁄4 -14 NGT JV32661-XXnipple) 1-111⁄2 NGT JV32681-XX
.750 -16 UNF JV32651-XX-751.125 -12 UNF JV32651-XX
Oxygen0 psi TO 3,000 psi 540 .903 -14 NGO RH Ext. 1⁄2 -14 NGT JV5441-XX
3⁄4 -14 NGT JV5461-XX1-111⁄2 NGT JV5481-XX.750 -16 UNF JV5451-XX-751.125-12 UNF JV5451-XX
3,001 psi TO 4,000 psi 577 .960 -14 NGO RH Ext. 3⁄4 -14 NGT JV57761-XX4,001 psi TO 5,500 psi 701 1.103 -14 NGO RH Ext. 3⁄4 -14 NGT JV70161-XX
Sulfur Dioxide 660 1.030 -14 NGO RH Ext. 1⁄2 -14 NGT JV6642-165(Face Washer) 3⁄4 -14 NGT JV6662-165
1 -111⁄2 NGT JV6682-165.750 -16 UNF JV6652-165-751.125 -12 UNF JV6652-165
Xenon0 psi TO 3,000 psi 580 .965 -14 NGO RH Int. 1⁄2 -14 NGT JV5841-XX
3⁄4 -14 NGT JV5861-XX1-111⁄2 NGT JV5881-XX.750 -16 UNF JV5851-XX-751.125 -12 UNF JV5851-XX
3,001 psi TO 5,500 psi 680 1.045 -14 NGO RH Int. 3⁄4 -14 NGT JV68061-XX5,501 psi TO 7,500 psi 677 1.030 -14 NGO LH Ext. 3⁄4 -14 NGT JV67761-XX
• XX - Denotes Pressure Relief Device burst disc rupture pressure. See page xix for part number suffix.
• For technical information refer to Technical Section, page 17.
• Available on Request:
- 4 and 7 threads oversize inlets: To order, add -4 or -7 to end of part number.ex: JV34661-XX becomes JV34661-XX-7
- Chrome plating: To order, add letter “A” after letters “JV” in part number.ex: JV34661-XX becomes JVA 34661-XX
- Anti-surge feature: To order, add letter “N” after part number.ex: JV34661-XX becomes JV34661-XXN
- Fusible backed pressure relief devices in 165° F or 212° F nominal melting temperatures: To order, change the “1” in the part number to 4 for 165° or to a 5 for 212°.
ex: JV34661-XX becomes JV34664-XX for 165° or JV34665-XX for 212°.
- Lexan® polycarbonate handwheelTo order, add suffix “LX” to end of part number.ex: JV5451-32 becomes JV5451-32LX
17
KVA Series Post Type Medical Valves
KVA SeriesPost Medical Valves
• Strong, durable brass body made fromextruded brass rod will fit all yokes madeto CGA860 drawing specifications
• Protective and attractive chrome finish
• Durable lower plug made of tough navalbrass resists wear
• Lower plug is Teflon®-coated to addlubricity, which minimizes seizing andgalling especially under high pressureoperation
• Internally threaded chamber designpromotes longer life and helps protectvalve body chamber threads fromdamage
• Chamber design minimizes risk ofbroken stems caused by carelesshandling of cylinders
• Single unit, compact pressure reliefresists tampering
• Nickel 201 rupture disc resistspremature rupture that may be causedby corrosion from ambient environments
• Large wrench flats on bonnet for easyremoval
• Precise, quality machining results inexceptional finishes for low torquesealing and long packing life
• Inert Teflon packing provides leak-freestem seal, long cycle life and resistanceto corrosion
• Secondary O-Ring seal located aboveTeflon packing helps provide secure sealunder vacuum purging and low pressureoperation
• Copper sealing gasket providespermanent, leak-resistant bonnet seal
• Oxygen cleaned with aqueous detergentto CGA Specification G4.1
1-888-50VALVE (508-2583)
Sherwood Cylinder Valve Ordering Chart
Sherwood and the “SS” symbol are trademarks of Sherwood, Harsco Corporation, Gas and Fluid Control GroupAll other names are trademarks of their respective owners.
© 2000 Sherwood, Harsco Corporation, Gas and Fluid Control Group
18
T-CG02LL97
KVA SERIES - POST MEDICAL VALVES
Gas CGA Pin Indexing Inlet SherwoodService Outlet Hole Numbers Thread Size Part Number
Number
Air (R729) 950 Pins #1 AND #5 1⁄2 -14 NGT KVA9544F-32.750 -16 UNF-2A KVA9554B-32
Carbon Dioxide 940 Pins #1 AND #6 1⁄2 -14 NGT KVA9441-32.750 -16 UNF-2A KVA9451-32
Cyclopropane 920 Pins #3 AND #6 1⁄2 -14 NGT KVA9241-32.750 -16 UNF-2A KVA9251-32
Ethylene 900 Pins #1 AND #3 1⁄2 -14 NGT KVA9044F-32.750 -16 UNF-2A KVA9054B-32
Helium 930 Pins #4 AND #6 1⁄2 -14 NGT KVA9344F-32.750 -16 UNF-2A KVA9354B-32
Medical Gas Mixtures 973 Pins #11 AND #24 1⁄2 -14 NGT KVA97344F-32.750 -16 UNF-2A KVA97354B-32
Nitrogen 960 Pins #1 AND #4 1⁄2 -14 NGT KVA9644F-32.750 -16 UNF-2A KVA9654B-32
Nitrous Oxide 910 Pins #3 AND #5 1⁄2 -14 NGT KVA9141-32.750 -16 UNF-2A KVA9151-32
Nitrous Oxide & 965 Pin # 7 1⁄2 -14 NGT KVA96544F-32Oxygen Mixtures .750 -16 UNF-2A KVA96554B-32
Oxygen 870 Pins #2 AND #5 1⁄2 -14 NGT KVA8744F-32.750 -16 UNF-2A KVA8754B-32
Oxygen & Carbon 880 Pins #2 AND #6 1⁄2 -14 NGT KVA8844F-32Dioxide Mixtures .750 -16 UNF-2A KVA8854B-32
Oxygen & Helium 890 Pins #2 AND #4 1⁄2 -14 NGT KVA8944F-32Mixtures .750 -16 UNF-2A KVA8954B-32
• All valves supplied with 165° F fusible metal backed, flush style pressure relief devices and copper alloy rupture discs except CarbonDioxide (KVA9451-32), Nitrous Oxide (KVA9151-32), and Cyclopropane (KVA9251-32) which are supplied with unbacked hex-stylepressure relief devices and nickel 201 rupture discs.
• All valves are supplied with rupture discs rated for 2015 psig service pressure cylinders. Rupture discs rated for other servicepressures available on request.
• For technical information refer to Technical Section, page 21.• Available on request:
- Lexan® polycarbonate, wing style handwheel: To order, add “H” to end of part number (only available on .750-16UUF2A inlet valves).
ex: KVA8754B-32 becomes KVA8754B-32H
- Chrome-plated brass toggle lever: To order, add “TG” to end of part number. ex: KVA8754B-32 becomes KVA8754B-32TG
- Kel-F® seat material: To order, add “K” to end of part number.ex: KVA8745B-32 becomes KVA8754B-32K
- 1⁄8"-27 NPT gauge port: To order, add “G” to end of part number.ex: KVA8754B-32 becomes KVA8754B-32G
19
SHERCheck®TV Series Residual Pressure Back Check Valves
SHERCheck®TV SeriesResidual Pressure BackCheck Valves
• Retentive pressure of <30 psig maintainsintegrity of empty cylinder againstaspiration of contaminants caused byopen valve
• Integral back check mechanism helpsprevent backflow if system pressurebecomes higher than cylinder pressure
• Residual pressure/back check pistonmade of strong stainless steel forextended service life
• Strong, durable forged brass bodymanufactured by Sherwood tospecifications stricter than mostcommercial forging specifications
• High-temperature aluminum alloyhandwheel with large drainage holes
• Integral stainless steel tang helpsprevent internal stem breakage
• Durable lower plug made of tough navalbrass resists wear
• Lower plug is Teflon®-coated to addlubricity, which minimizes seizing andgalling especially under high pressureoperation
• Internally threaded chamber designpromotes longer life and helps protectvalve body chamber threads fromdamage
• Nickel 201 rupture disc resistspremature rupture that may be causedby corrosive ambient environments
• Precise, quality machining results inexceptional finishes for low torquesealing and long packing life
• Inert Teflon packing provides leak-freestem seal, long cycle life and resistanceto corrosion
• Handwheel nut coated with corrosion-resistant chromate/zinc organic plating
1-888-50VALVE (508-2583)
Sherwood Cylinder Valve Ordering Chart
Sherwood and the “SS” symbol are trademarks of Sherwood, Harsco Corporation, Gas and Fluid Control GroupAll other names are trademarks of their respective owners.
© 2000 Sherwood, Harsco Corporation, Gas and Fluid Control Group
20
T-CG02WW97
SHERCHECK® TV SERIES - RESIDUAL PRESSURE BACKCHECK VALVES
Gas CGA Outlet Inlet SherwoodService Outlet Thread Size Thread Size Part Number
Number
Air (R729) 346 .825 -14 NGO RH Ext. 3⁄4 -14 NGT TV34661PR-XX347 .825 -14 NGO RH Ext. 3⁄4 -14 NGT TV34761PR-XX
Argon 580 .965 -14 NGO RH Int. 3⁄4 -14 NGT TV5861PR-XX680 1.045 -14 NGO RH Int. 3⁄4 -14 NGT TV68061PR-XX
Carbon Monoxide 350 .825 -14 NGO LH Ext. 3⁄4 -14 NGT TV3565PR-XX695 1.045 -14 NGO LH Int. 3⁄4 -14 NGT TV69565PR-XX
Helium 580 .965 -14 NGO RH Int. 3⁄4 -14 NGT TV5861PR-XX680 1.045 -14 NGO RHInt. 3⁄4 -14 NGT TV68061PR-XX
Hydrogen 350 .825 -14 NGO RH Ext. 3⁄4 -14 NGT TV3565PR-XX695 1.045 -14 NGO LHInt. 3⁄4 -14 NGT TV69561PR-XX
Krypton 580 .965 -14 NGO RH Int. 3⁄4 -14 NGT TV5861PR-XX680 1.045 -14 NGO RH Int. 3⁄4 -14 NGT TV68061PR-XX
Methane (R50) 350 .825 -14 NGO LH Ext. 3⁄4 -14 NGT TV3565PR-XX695 1.045 -14 NGO LH Int. 3⁄4 -14 NGT TV69565PR-XX
Natural Gas 350 .825 -14 NGO LH Ext. 3⁄4 -14 NGT TV3565PR-XX695 1.045 -14 NGO LH Int. 3⁄4 -14 NGT TV69565PR-XX
Neon 580 .965 -14 NGO RH Int. 3⁄4 -14 NGT TV5861PR-XX680 1.045 -14 NGO RHInt. 3⁄4 -14 NGT TV68061PR-XX
Nitrogen 580 .965 -14 NGO RH Int. 3⁄4 -14 NGT TV5861PR-XX680 1.045 -14 NGO RHInt. 3⁄4 -14 NGT TV68061PR-XX
Oxygen 540 .903 -14 NGO RH Ext. 3⁄4 -14 NGT TV5461PR-XX577 .960 -14 NGO RH Ext. 3⁄4 -14 NGT TV57761PR-XX
Xenon 580 .965 -14 NGO RH Int.. 3⁄4 -14 NGT TV5861PR-XX680 1.045-14 NGO RH Int. 3⁄4 -14 NGT TV68061PR-XX
• XX - Denotes Pressure Relief Device burst disc rupture pressure. See page xix for part number suffix.• For technical information see Technical Section, page 25.• Available on request:
- 4 and 7 threads oversize inlets: To order, add -4 or -7 to end of part number.ex: TV34661PR-XX becomes TV34661PR-XX-7.
- Chrome plating: To order, add letter “A” after letters “TV” in part number.ex: TV34661PR-XX becomes TVA 34661PR-XX
- Anti-Surge Feature: To order, add letter “N” after part number.ex: TV34661PR-XX becomes TV34661PR-XXN
- Fusible backed pressure relief devices in 165° F or 212° F nominal melting temperatures: To order, change the “1” in the part number to “4” for 165° or to “5” for 212° .
ex: TV34661PR-XX becomes TV34664PR-XX for 165° or TV34665PR-XX for 212° .- Rubber covered handwheel: To order, add letters “HC” after part number.
ex: TV34661PR-XX becomes TV34661PR-XXHC.
Filling Adapter Part Numbers With Retractable Pin Without Retractable Pin For CGA346 outlet order P/N TL346AA TL346DFor CGA350 outlet order P/N TL350AA TL350DFor CGA540 outlet order P/N TL540AA TL540DFor CGA580 outlet order P/N TL580AA TL580D
For other CGA Outlets please contact the factory for ordering infomation.
21
TV SeriesManifold Valves
TV SeriesPacked Industrial Manifold Valves
• Secondary O-Ring seal located aboveTeflon® packing provides secure sealunder low pressure operation
• Strong, durable forged brass bodymanufactured by Sherwood tospecifications stricter than mostcommercial forging specifications
• High-temperature aluminum alloyhandwheel with large drainage holes
• Integral stainless steel tang helpsprevent internal stem breakage
• Durable lower plug made of tough navalbrass resists wear
• Lower plug is Teflon-coated to addlubricity, which minimizes seizing andgalling especially under high pressureoperation
• Internally threaded chamber designpromotes longer life and helps protectvalve body chamber threads fromdamage
• Precise, quality machining results inexceptional finishes for low torquesealing and long packing life
• Inert Teflon packing provides leak-freestem seal, long cycle life and resistanceto corrosion
• Handwheel nut coated with corrosion-resistant chromate/zinc organic plating
1-888-50VALVE (508-2583)
Sherwood Cylinder Valve Ordering Chart
Sherwood and the “SS” symbol are trademarks of Sherwood, Harsco Corporation, Gas and Fluid Control GroupAll other names are trademarks of their respective owners.
© 2000 Sherwood, Harsco Corporation, Gas and Fluid Control Group
22
TV SERIES - PACKED INDUSTRIAL MANIFOLD VALVES
Gas CGA Outlet Inlet SherwoodService Outlet Thread Size Thread Size Part Number
Number
Air (R729)0 psi TO 3,000 psi 346 .825-14 NGO RH Ext. 1⁄2 -14 NGT TV34640
3⁄4 -14 NGT TV346603,001 psi TO 5,500 psi 347 .825-14 NGO RH Ext. 3⁄4 -14 NGT TV34760
Long Nipple5,501 psi TO 7,500 psi 702 1.125-14 NGO RH Int. 3⁄4 -14 NGT TV70260
Argon0 psi TO 3,000 psi 580 .965-14 NGO RH Int. 1⁄2 - 14 NGT TV5840
3⁄4 -14 NGT TV58603.001 psi TO 5,500 psi 680 1.045-14 NGO RH Int. 3⁄4 -14 NGT TV680605,501 psi TO 7,500 psi 677 1.030-14 NGO LH Ext. 3⁄4 -14 NGT TV67760
Carbon Dioxide (R744) 320 .825-14 NGO RH Ext. 1⁄2 -14 NGT TV32403⁄4 -14 NGT TV3260
Carbon Monoxide0 psi TO 3,000 psi 350 .825-14 NGO LH Ext. 1⁄2 -14 NGT TV3540
3⁄4 -14 NGT TV35603,001 psi TO 5,500 psi 695 1.045-14 NGO LH Int. 3⁄4 -14 NGT TV695605,501 psi TO 7,500 psi 703 1.125-14 NGO LH Int. 3⁄4 -14 NGT TV70360
Helium0 psi TO 3,000 psi 580 .965-14 NGO RH Int. 1⁄2 -14 NGT TV5840
3⁄4 -14 NGT TV58603,001 psi TO 5,500 psi 680 1.045-14 NGO RH Int. 3⁄4 -14 NGT TV680605,501 psi TO 7,500 psi 677 1.030-14 NGO LH Ext. 3⁄4 -14 NGT TV67760
Hydrogen0 psi TO 3,000 psi 350 .825-14 NGO LH Ext. 1⁄2 -14 NGT TV3540
3⁄4 -14 NGT TV35603.001 psi TO 5,500 psi 695 1.045-14 NGO LH Int. 3⁄4 -14 NGT TV695605,501 psi TO 7,500 psi 703 1.125-14 NGO LH Int. 3⁄4 -14 NGT TV70360
Krypton0 psi TO 3,000 psi 580 .965-14 NGO RH Int. 1⁄2 -14 NGT TV5840
3⁄4 -14 NGT TV58603,301 psi TO 5,500 psi 680 1.045-14 NGO RH Int. 3⁄4 -14 NGT TV680605,501 psi TO 7,500 psi 677 1.030-14 NGO LH Ext. 3⁄4 -14 NGT TV67760
Methane (R50)0 psi TO 3,000 psi 350 .825-14 NGO LH Ext. 1⁄2 -14 NGT TV3540
3⁄4 -14 NGT TV35603,001 psi TO 5,500 psi 695 1.045-14 NGO LH Int. 3⁄4 -14 NGT TV695605,501 psi TO 7,500 psi 703 1.125-14 NGO LH Int. 3⁄4 -14 NGT TV70360
Natural Gas0 psi TO 3,000 psi 350 .825-14 NGO LH Ext. 1⁄2 -14 NGT TV3540
3⁄4 -14 NGT TV35603,001 psi TO 5,500 psi 695 1.045-14 NGO LH Int. 3⁄4 -14 NGT TV695605,501 psi TO 7,500 psi 703 1.125-14 NGO LH Int. 3⁄4 -14 NGT TV70360
T-CG02TT97
Sherwood Cylinder Valve Ordering Chart
23
TV SERIES - PACKED INDUSTRIAL MANIFOLD VALVES
Gas CGA Outlet Inlet SherwoodService Outlet Thread Size Thread Size Part Number
Number
Neon0 psi TO 3,000 psi 580 .965 -14 NGO RH Int. 1⁄2 -14 NGT TV5840
3⁄4 -14 NGT TV58603,301 psi TO 5,500 psi 680 1.045 -14 NGO RH Int. 3⁄4 -14 NGT TV680605,501 psi TO 7,500 psi 677 1.030 -14 NGO LH Ext. 3⁄4 -14 NGT TV67760
Nitrogen0 psi TO 3,000 psi 580 .965 -14 NGO RH Int. 1⁄2 -14 NGT TV5840
3⁄4 -14 NGT TV58603,301 psi TO 5,500 psi 680 1.045 -14 NGO RH Int. 3⁄4 -14 NGT TV680605,501 psi TO 7,500 psi 677 1.030 -14 NGO LH Ext. 3⁄4 -14 NGT TV67760
Nitrous Oxide (R744a) 326 .825 -14 NGO RH Ext. 1⁄2 -14 NGT TV32640(Small round nipple) 3⁄4 -14 NGT TV32660
Oxygen0 psi TO 3,000 psi 540 .903 -14 NGO RH Ext. 1⁄2 -14 NGT TV5440
.960 -14 NGO RH Ext. 3⁄4 -14 NGT TV54603,001 psi TO 4,000 psi 577 1.103 -14 NGO RH Ext. 3⁄4 -14 NGT TV577604,001 psi TO 5,500 psi 701 3⁄4 -14 NGT TV70160
Sulfur Dioxide 660 1.030 -14 NGO RH Ext. 1⁄2 -14 NGT TV6640(Face Washer) 3⁄4 -14 NGT TV6660
Xenon0 psi TO 3,000 psi 580 .965 -14 NGO RH Int. 1⁄2 -14 NGT TV5840
3⁄4 -14 NGT TV58603,001 psi TO 5,500 psi 680 1.045 -14 NGO RH Int. 3⁄4 -14 NGT TV680605,501 psi TO 7,500 psi 677 1.030 -14 NGO LH Ext. 3⁄4 -14 NGT TV67760
• For technical information refer to Technical Section, page 27.
Sherwood Cylinder Valve Ordering Chart
Sherwood and the “SS” symbol are trademarks of Sherwood, Harsco Corporation, Gas and Fluid Control GroupAll other names are trademarks of their respective owners.
© 2000 Sherwood, Harsco Corporation, Gas and Fluid Control Group
24
T-CG02TT97
25
TV SeriesAcetylene Valves
TV SeriesHandwheel-OperatedAcetylene Valves
• Strong, durable forged brass bodymanufactured by Sherwood tospecifications stricter than mostcommercial forging specifications
• High-temperature aluminum alloyhandwheel with large drainage holes
• Integral stainless steel tang helpsprevent internal stem breakage
• Durable lower plug made of tough navalbrass resists wear
• Lower plug is Teflon®-coated to addlubricity, which minimizes seizing andgalling especially under high pressureoperation
• Internally threaded chamber designpromotes longer life and helps protectvalve body chamber threads fromdamage
• Precise, quality machining results inexceptional finishes for low torquesealing and long packing life
• Inert Teflon packing provides leak-freestem seal, long cycle life and resistanceto corrosion
• Secondary O-Ring seal located aboveTeflon packing helps provide secure sealunder vacuum purging and low pressureoperation
• Handwheel nut coated with corrosion-resistant chromate/zinc organic plating
1-888-50VALVE (508-2583)
Sherwood and the “SS” symbol are trademarks of Sherwood, Harsco Corporation, Gas and Fluid Control GroupAll other names are trademarks of their respective owners.
© 2000 Sherwood, Harsco Corporation, Gas and Fluid Control Group
26
Sherwood Cylinder Valve Ordering Chart
T-CG03L97
TV SERIES - HANDWHEEL OPERATED ACETYLENE VALVES
Sherwood CGA Outlet InletPart Number Outlet Thread Size Thread Size
Number
TV3040 300 .825"-14 NGO RH Ext. 1⁄2"-14 NGT(Commercial)
TV3060 300 .825"-14 NGO RH Ext. 3⁄4"-14 NGT(Commercial)
TV3080 300 .825"-14 NGO RH Ext. 1"-111⁄2 NGT(Commercial)
TV4160 415 .850"-14 NGO LH Ext. 3⁄4"-14 NGT(Canadian Std.)
TV5140 510 .885"-14 NGO LH Int. 1⁄2"-14 NGT(P.O.L.)
TV5160 510 .885"-14 NGO LH Int. 3⁄4"-14 NGT(P.O.L.)
TV5180 510 .885"-14 NGO LH Int. 1"-111⁄2 NGT(P.O.L.)
• For technical information refer to Technical Section, page 29.
• Available on request:
- Outlet caps and plugs with or without chain and rings.
- Valves conforming to Department of Defense Specification MIL-DTL-2E.
1-888-50VALVE (508-2583)
27
TV Series Industrial and Chrome Plated Valves
TV Series Packed Pressure Seal StyleIndustrial and Chrome PlatedValves
• Strong, durable forged brass bodymanufactured by Sherwood tospecifications stricter than mostcommercial forging specifications
• High-temperature aluminum alloyhandwheel with large drainage holes
• Integral stainless steel tang helpsprevent internal stem breakage
• Durable lower plug made of tough navalbrass resists wear
• Lower plug is Teflon®-coated to addlubricity, which minimizes seizing andgalling especially under high pressureoperation
• Internally threaded chamber designpromotes longer life and helps protectvalve body chamber threads fromdamage
• Nickel 201 rupture disc resistspremature rupture that may be causedby corrosive ambient environments
• Precise, quality machining results inexceptional finishes for low torquesealing and long packing life
• Inert Teflon packing provides leak-freestem seal, long cycle life and resistanceto corrosion
• Handwheel nut coated with corrosion-resistant chromate/zinc organic plating
• Where applicable, Nickel chrome platedfor durability . Also provides a protectivecoating to help shield the valve fromliquids and cleaning solutions containingammonia, chlorine and other chemicalsharmful to copper alloys.
Sherwood Cylinder Valve Ordering Chart
Sherwood and the “SS” symbol are trademarks of Sherwood, Harsco Corporation, Gas and Fluid Control GroupAll other names are trademarks of their respective owners.
© 2000 Sherwood, Harsco Corporation, Gas and Fluid Control Group
28
TV SERIES - PACKED PRESSURE SEAL STYLE INDUSTRIAL VALVES
Gas CGA Outlet Inlet SherwoodService Outlet Thread Size Thread Size Part Number
Number
Air (R729)0 psi TO 3,000 psi 346 .825 -14 NGO RH Ext. 1⁄2 -14 NGT TV34641-XX
3⁄4 -14 NGT TV34661-XX1-111⁄2 NGT TV34681-XX.750 -16 UNF TV34651-XX-751.125 -12 UNF TV34651-XX
3,001 psi TO 5,500 psi 347 .825 -14 NGO RH Ext. 3⁄4 -14 NGT TV34761-XX(Long Nipple)
5,501 psi TO 7,500 psi 702 1.125-14 NGO RH Int. 3⁄4 -14 NGT TV70261-XX
Argon0 psi TO 3,000 psi 580 .965 -14 NGO RH Int. 1⁄2 - 14 NGT TV5841-XX
3⁄4 -14 NGT TV5861-XX1-111⁄2 NGT TV5881-XX.750 -16 UNF TV5851-XX-751.125 -12 UNF TV5851-XX
3,001 psi TO 5,500 psi 680 1.045 -14 NGO RH Int. 3⁄4 -14 NGT TV68061-XX5,501 psi TO 7,500 psi 677 1.030 -14 NGO LH Ext. 3⁄4 -14 NGT TV67761-XX
Butane/Propane 555 .903 -14 NGO LH Ext. 1⁄2 -14 NGT TV55541-XXLiquid Withdrawal 3⁄4 -14 NGT TV55561-XX
1-111⁄2 NGT TV55581-XX.750-16 UNF TV55551-XX-751.125-12 UNF TV55551-XX
Carbon Dioxide (R744) 320 .825 -14 NGO RH Ext. 1⁄2 -14 NGT TV3241-XX3⁄4 -14 NGT TV3261-XX1-111⁄2 NGT TV3281-XX.750 -16 UNF TV3251-XX-751.125 -12 UNF TV3251-XX
Carbon Monoxide 350 .825 -14 NGO LH Ext. 1⁄2 -14 NGT TV3545-XX0 psi TO 3,000 psi 3⁄4 -14 NGT TV3565-XX
1-111⁄2 NGT TV3585-XX.750 -16 UNF TV3555-XX-751.125 -12 UNF TV3555-XX
3,001 psi TO 5,500 psi 695 1.045 -14 NGO LH Int. 3⁄4 -14 NGT TV69561-XX5,501 psi TO 7,500 psi 703 1.125 -14 NGO LH Int. 3⁄4 -14 NGT TV70365-XX
1,2 Dichloroethylene 660 1.030 -14 NGO RH Ext. 1⁄2 -14 NGT TV6640(R1130) (Face Washer) 3⁄4 -14 NGT TV6660
1-111⁄2 NGT TV6680.750-16 UNF TV6650-751.125-12 UNF TV6650
Helium0 psi TO 3,000 psi 580 .965 -14 NGO RH Int. 1⁄2 -14 NGT. TV5841-XX
3⁄4 -14 NGT TV5861-XX1-111⁄2 NGT TV5881-XX.750 -16 UNF TV5851-XX-751.125 -12 UNF TV5851-XX
3,001 psi TO 5,501 psi 680 1.045 -14 NGO RH Int. 3⁄4 -14 NGT TV68061-XX5,501 psi TO 7,500 psi 677 1.030 -14 NGO LH Ext. 3⁄4 -14 NGT TV67761-XX
T-CG02QQ97
Sherwood Cylinder Valve Ordering Chart
29
TV SERIES - PACKED PRESSURE SEAL STYLE INDUSTRIAL VALVES
Gas CGA Outlet Inlet SherwoodService Outlet Thread Size Thread Size Part Number
Number
Hydrogen0 psi TO 3,000 psi 350 .825-14 NGO LH Ext. 1⁄2 -14 NGT TV3545-XX
3⁄4 -14 NGT TV3565-XX1-111⁄2 NGT TV3585-XX.750-16 UNF TV3555-XX-751.125-12 UNF TV3555-XX
3,001 psi TO 5,500 psi 695 1.045-14 NGO LH Int. 3⁄4 -14 NGT TV69565-XX5,501 psi TO 7,500 psi 703 1.125-14 NGO LH Int. 3⁄4 -14 NGT TV70365-XX
Krypton0 psi TO 3,000 psi 580 .965-14 NGO RH Int. 1⁄2 -14 NGT TV5841-XX
3⁄4 -14 NGT TV5861-XX1-111⁄2 NGT TV5881-XX.750-16UNF TV5851-XX-751.125-12UNF TV5851-XX
3,001 psi TO 5,500 psi 680 1.045-14 NGO RH Int. 3⁄4 -14 NGT TV68061-XX5,501 psi TO 7,500 psi 677 1.030-14 NGO LH Ext. 3⁄4 -14 NGT TV67761-XX
Methane (R50)0 psi TO 3,000 psi 350 .825-14 NGO LH Ext. 1⁄2 -14 NGT TV3545-XX
3⁄4 -14 NGT TV3565-XX1-111⁄2 NGT TV3585-XX.750-16 UNF TV3555-XX-751.125-12 UNF TV3555-XX
3,001 psi TO 5,501 psi 695 1.045-14 NGO LH Int. 3⁄4 -14 NGT TV69565-XX5,501 psi TO 7,500 psi 703 1.125-14 NGO LH Int. 3⁄4 -14 NGT TV70365-XX
Natural Gas0 psi TO 3,000 psi 350 .825-14 NGO LH Ext. 1⁄2 -14 NGT TV3545-XX
3⁄4 -14 NGT TV3565-XX1-111⁄2 NGT TV3585-XX.750-16 UNF TV3555-XX-751.125-12 UNF TV3555-XX
3,001 psi TO 5,500 psi 695 1.045-14 NGO LH Int. 3⁄4 -14 NGT TV69565-XX5,501 psi TO 7,500 psi 703 1.125-14 NGO LH Int. 3⁄4 -14 NGT TV70365-XX
Neon0 psi TO 3,000 psi 580 .965-14 NGO RH Int. 1⁄2 -14 NGT TV5841-XX
3⁄4-14 NGT TV5861-XX1-111⁄2 NGT TV5881-XX.750 -16 UNF TV5851-XX-751.125-12 UNF TV5851-XX
3,001 psi TO 5,500 psi 680 1.045-14 NGO RH Int. 3⁄4 -14 NGT TV68061-XX5,501 psi TO 7,500 psi 677 1.030-14 NGO LH Ext. 3⁄4 -14 NGT TV67761-XX
Nitrogen0 psi TO 3,000 psi 580 .965-14 NGO RH Int. 1⁄2 -14 NGT TV5841-XX
3⁄4 -14 NGT TV5861-XX1-111⁄2 NGT TV5881-XX.750-16 UNF TV5851-XX-751.125-12 UNF TV5851-XX
3,001 psi TO 5,500 psi 680 1.045-14 NGO RH Int. 3⁄4-14 NGT TV68061-XX5,501 psi TO 7,500 psi 677 1.030-14 NGO LH Ext. 3⁄4-14 NGT TV67761-XX
Sherwood Cylinder Valve Ordering Chart
Sherwood and the “SS” symbol are trademarks of Sherwood, Harsco Corporation, Gas and Fluid Control GroupAll other names are trademarks of their respective owners.
© 2000 Sherwood, Harsco Corporation, Gas and Fluid Control Group
30
T-CG02QQ97
TV SERIES - PACKED PRESSURE SEAL STYLE INDUSTRIAL VALVES
Gas CGA Outlet Inlet SherwoodService Outlet Thread Size Thread Size Part Number
Number
Nitrous Oxide (R744a) 326 .825-14 NGO RH Ext. 1⁄2 -14 NGT TV32641-XX(Small round nipple) 3⁄4 -14 NGT TV32661-XX
1-111⁄2 NGT TV32681-XX.750-16 UNF TV32651-XX-751.125-12 UNF TV32651-XX
Oxygen0 psi TO 3,000 psi 540 .903-14 NGO RH Ext. 1⁄2 -14 NGT TV5441-XX
3⁄4 -14 NGT TV5461-XX1-111⁄2 NGT TV5481-XX.750-16 UNF TV5451-XX-751.125-12UNF TV5451-XX
3,001 psi TO 4,000 psi 577 .960-14 NGO RH Ext. 3⁄4 -14 NGT TV57761-XX4,001 psi TO 5,500 psi 701 1.103-14 NGO RH Ext. 3⁄4 -14 NGT TV70161-XX
Sulfur Dioxide 660 1.030-14 NGO RH Ext. 1⁄2 -14 NGT TV6642-165( Face Washer) 3⁄4 -14 NGT TV6662-165
1-111⁄2 NGT TV6682-165.750-16 UNF TV6652-165-751.125-12 UNF TV6652-165
Xenon0 psi TO 3,000 psi 580 .965-14 NGO RH Int. 1⁄2 -14 NGT TV5841-XX
3⁄4 -14 NGT TV5861-XX1-111⁄2 NGT TV5881-XX.750-16 UNF TV5851-XX-751.125-12 UNF TV5851-XX
3,001 psi TO 5,500 psi 680 1.045-14 NGO RH Int. 3⁄4 -14 NGT TV68061-XX5,501 psi TO 7,500 psi 677 1.030-14 NGO LH Ext. 3⁄4 -14 NGT TV67761-XX
• XX - Denotes Pressure Relief Device burst disc rupture pressure. See page xix for part number suffix.
• For technical information refer to Technical Section, page 31.
• Available with:
- 4 and 7 threads oversize inlets: To order add -4 or -7 to end of part number.ex: TV34661-XX becomes TV34661-XX-7.
- Chrome Plating: To order, add letter “A” after letters “TV” in part number.ex: TV34661-XX becomes TVA 34661-XX
- Anti-Surge Feature: To order, add letter “N” after part number.ex: TV34661-XX becomes TV34661-XXN
- Fusible backed pressure relief devices in 165° F or 212° F nominal melting temperatures: To order, change 1 in the part number to 4 for 165° or to 5 for 212°.ex: TV34661-XX becomes TV34664-XX for 165° or TV34665-XX for 212°.
- Lexan® polycarbonate handwheelsTo order, add suffix “LX” to end of part number.ex: TV34651-XX becomes TV34651-XXLX
31
YV and YVA Series Line and Panel Valves
YV and YVA SeriesLine Valves
• Strong, durable forged brass bodymanufactured by Sherwood tospecifications stricter than mostcommercial forging specifications
• Designed for use in service pressure upto 6,000 psig
• Compact design especially suited foruse on compressor or cascade panels
• Chamber specially designed for lowtorque operation
• Stainless steel stem design fordependable service and long life
• Proprietary dual packing chamberdesign provides dependable sealcharacteristics and long service life andeasy operation
• Durable lower plug made of tough navalbrass resists wear
• Lower plug is Teflon®-coated to addlubricity, which minimizes seizing andgalling especially under high pressureoperation
• Internal protected bonnet gasket sealprovides positive, damage-resistantchamber seal
• Compact molded Lexan® polycarbonatehandwheel is easy to use
1-888-50VALVE (508-2583)
Sherwood Cylinder Valve Ordering Chart
Sherwood and the “SS” symbol are trademarks of Sherwood, Harsco Corporation, Gas and Fluid Control GroupAll other names are trademarks of their respective owners.
© 2000 Sherwood, Harsco Corporation, Gas and Fluid Control Group
32
T-CG02ZZ97
YV AND YVA SERIES LINE VALVES
Part Inlet Outlet Panel Panel ChromeNumber Thread Size Thread Size Mount Hole Size Plated
YV 3010 1⁄4 -18 NPT Int. 1⁄4 -18 NPT Ext. No No
YVA3010 1⁄4 -18 NPT Int. 1⁄4 -18 NPT Ext. No Yes
YV3010A 1⁄4 -18 NPT Int. 1⁄4 -18 NPT Ext. Yes 11⁄16 No
YVA3010A 1⁄4 -18 NPT Int. 1⁄4 -18 NPT Ext. Yes 11⁄16 Yes
• For technical information refer to Technical Section, page 35.
33
YVB Series Vertical Outlet Medical Oxygen Valves
YVB SeriesVertical Outlet MedicalOxygen Valves
• Compact design for use on smallmedical aluminum and compositeoxygen cylinders (home health careapplications)
• Chamber designed for easy operation
• Stainless steel stem design fordependable service and long life
• Durable lower plug made of tough navalbrass resists wear
• Lower plug is Teflon®-coated to addlubricity, which minimizes seizing andgalling especially under high pressureoperation
• Internal bonnet gasket seal resistsdamage to chamber sealing area
• Compact molded Lexan® polycarbonatehandwheel is easy to operate
• Single unit, compact pressure reliefdevice incorporates 165° F fusible metalbacking to resist premature rupture andprovide maximum cylinder protection
• Chrome plated for corrosion resistanceand cosmetic appeal
• Oxygen cleaned with aqueous detergentto CGA specification G4.1
1-888-50VALVE (508-2583)
Sherwood Cylinder Valve Ordering Chart
Sherwood and the “SS” symbol are trademarks of Sherwood, Harsco Corporation, Gas and Fluid Control GroupAll other names are trademarks of their respective owners.
© 2000 Sherwood, Harsco Corporation, Gas and Fluid Control Group
34
T-CG02XX97
YVB SERIES - VERTICAL OUTLET MEDICAL OXYGEN VALVES
Part Number CGA Outlet Thread Inlet GaugeOutlet Size Thread Size Port
YVB5454-XX-62 540 .903-14 NGO RH Ext. .625-18 UNF2A None
YVB5454-XX-62G 540 .903-14 NGO RH Ext. .625-18 UNF2A 1⁄8 NPT
YVB5454-XX-75 540 .903-14 NGO RH Ext. .750-16 UNF2A None
YVB5454-XX-75G 540 .903-14 NGO RH Ext. .750-16 UNF2A 1⁄8 NPT
• For technical information refer to Technical Section, page 37.
• All valves supplied with 165° F fusible metal backed, flush style, pressure relief devices and copper alloy rupture discs.
• XX denotes Pressure Relief Device burst disc rupture pressure. See page xix for part number suffix. All valves are supplied withrupture discs rated for 2015 psig service pressure cylinders. Rupture discs rated for other service pressures available on request.
• Available on request:
- Pressure relief devices without fusible metal.- Kel-F®
- Hex-style, exhaust equalizing, pressure relief device plugs- Pressure Relief Devices for cylinders other than 2015 psig service pressure.- .750-16 UNF inlets with O-Ring glands in conformance with Military specifications.- Round, Barrel style Lexan® handwheel.
35
1-888-50VALVE (508-2583)Fusible PlugsManifold Connectors
Fusible Plugs
• All fuse plugs are UL Listed
• Produced from high quality brass andsteel alloy rod
• Meticulously controlled fusible alloyassures accurate and consistent melttemperatures
• Fusible alloy is cast into plug body toensure an extremely strong bondbetween alloy and plug body
• Fusible plug stamped with fusible metalyield temperature
Manifold Station Connectorsand Trailer Tube PressureRelief Devices
• Manifold Station Connectors arespecifically designed for use on chargingmanifolds, manifold banks or gasdistribution systems
• Station connectors are available with orwithout pressure relief devices
• Trailer Tube pressure relief devices aremade using the same components asthe dependable "TV" series cylindervalve
• Rupture discs are made of corrosionresistant nickel 201
• Available with a 3⁄4-16 SAE flare outlet foroverboard dumping
Sherwood and the “SS” symbol are trademarks of Sherwood, Harsco Corporation, Gas and Fluid Control GroupAll other names are trademarks of their respective owners.
© 2000 Sherwood, Harsco Corporation, Gas and Fluid Control Group
36
Sherwood Cylinder Valve Ordering Chart
T-CGO6C97
FUSIBLE PLUGS
Part Number Thread Body Fusible Metal Yield Clear OpeningSize Material Temp. Nominal Diameter
10-200B 1⁄8" NPTF Tinned Steel 212° F .2187"
FPA165 1⁄8" NPTF Brass 165° F .2187"
FPA212 1⁄8" NPTF Brass 212° F .2187"
FPB165 1⁄4" NPTF Brass 165° F .2500"
FPB212 1⁄4" NPTF Brass 212° F .2500"
FPC165 3⁄8" NPTF Brass 165° F .3750"
FPC212 3⁄8" NPTF Brass 212° F .3750"
MANIFOLD STATION CONNECTORS
Part Gas CGA NGO NGT Inlet PRD* PRD FusibleNumber Service Outlet Thread Thread See Pg. xix Outlet Metal
TV5441-XXCS Oxygen 540 903-14 NGO RH 1⁄2-14 NGT 650-19 Series None 212° F
TV5445-XXCS Oxygen 540 903-14 NGO RH 1⁄2-14 NGT 650-19SB Series None None
TV5461-XXCS Oxygen 540 903-14 NGO RH 3⁄4-14 NGT 650-19 Series None 212° F
TV5465-XXCS Oxygen 540 903-14 NGO RH 3⁄4-14 NGT 650-19SB Series None None
TV5440C Oxygen 540 903-14 NGO RH 1⁄2-14 NGT None None None
TV5460C Oxygen 540 903-14 NGO RH 3⁄4-14 NGT None None None
TRAILER TUBE PRESSURE RELIEF DEVICES MANIFOLD STATION CONNECTORS
Part Gas CGA NGO NGT Inlet PRD* PRD FusibleNumber Service Outlet Thread Thread See Pg. xix Outlet Metal
YA3131-XX N/A N/A 3⁄4-14 NGT 650-19F9-XX Series None None
YA3134-XX N/A N/A 3⁄4-14 NGT 650-19SM9-XX Series None 165° F
YA3135-XX N/A N/A 3⁄4-14 NGT 650-19SB9-XX Series None 212° FYA3131S-XX N/A N/A 3⁄4-14 NGT 3132SF9-XX Series** 3⁄4-16SAE None
FlaredYA3134S-XX N/A N/A 3⁄4-14 NGT 3132SB9-XX Series 3⁄4-16SAE 165° F
FlaredYA3135S-XX N/A N/A 3⁄4-14 NGT 3132SM9-XX Series 3⁄4-16SAE 212° F
Flared
*PRD= Pressure Relief Device
**With nickel alloy 201 Rupture Disc
Any Non-
CorrosiveGas
Service
© 2000 Sherwood, Harsco Corporation, Gas and Fluid Control Group
2111 Liberty DriveNiagara FallsNew York 14304-37444
Telephone: 716-283-1010Fax: 716-283-5737
Toll Free: 888-50VALVE (508-2583)Toll Free Fax: 800-416-0678