compSUPER XXS condensing unit

compSUPER XXS condensing unit (CDU)

Advansor A/SBautavej 1A · DK-8210 Aarhus V · T: +45 7217 0174M: info@advansor.dk · W: advansor.dk

The compSUPER XXS condensing unit (CDU) is a unique system with a capacity adapted to convenience stores, petrol stations and minor shops.

The CDU series consists of 4 refrigeration units (MT) and 2 freezer units (LT), designed for easy installation and mainte-nance, providing high temperature quality.

CO² refrigeration systems of the future

MODEL OVERVIEW

compSUPER XXS 1x0 MT4 1x0 MT9 1x0 MT12 1x0 MT15 1x1 LT4 1x1 LT9

Compressor type Hermetic rotary

Hermetic rotary

Semi hermetic reciprocating

Semi hermetic reciprocating

Hermetic rotary

Hermetic rotary

Gas Cooler(condenser Air cooled/ water cooled

Air cooled/ water cooled Air cooled Air cooled Air cooled/

water cooledAir cooled/

water cooled

Frequency range [Hz] 25/100 25/100 30/70 30/60 25/100 25/100

Cooling capacity *min/max [kW] 0,9/4,2 2,0/9,4 4/12 6,4/15,6 0,8/4,0 1,8/8,7

Noise level [dB(A) at 10 m] 45 45 50 50 45 45

Receiver volume [l] 11 11 2x11 2x11 11 11

Mechanical connectionsLiquid line Suction line

1xCU3/8”1xCU1/2”

1xCU3/8”1xCU1/2”

1xCU3/8”1xCU5/8”

1xCU3/8”1xCU5/8”

1xCU3/8”1xCU1/2”

1xCU3/8”1xCU5/8”

Electrical connection 3 x 400 V/50 Hz 3 x 400 V/50 Hz 3 x 400 V/50 Hz 3 x 400 V/50 Hz 3 x 400 V/50 Hz 3 x 400 V/50 Hz

Fuse [A]** 16 16 35 40 16 25

Length [mm] 975 975 1185 1185 975 1185

Width [mm] 800 800 1125 1125 800 1125

Height [mm] 1350 1350 1550 1550 1350 1550

Weight [kg] 320 320 550 550 325 550

*) Cooling capacities:MT version stated at -8°C evaporation / 32°C ambient LT version stated at -32°C evaporation / 32°C ambientMT and LT water cooled version stated at glycol 32°C / 40°C

**) CurrentMT version stated at -8°C evaporation / 32°C ambient LT version stated at -32°C evaporation / 32°C ambientMT and LT water cooled version stated at glycol 32°C / 40°C

compSUPER XXS Condensing Unit

Standard configurationsHigh-quality, hermetic rotary compressorsElectronic compressor controllerElectrical panel mounted in cabinet door Frequency-controlled compressor (25-100 Hz)Speed-controlled fanWeather-proof cabinet

Design pressure• 60 bar on suction side• 90 bar in receiver and liquid line• 120 bar on high-pressure side

Optional extras• Heat recovery

Designed as an integrated unit with a cabinet including; • compressor• liquid receiver• controller• condenser/gas cooler

The CDU unit is delivered fully assembled and pressure tested, - consequently only the liquid and suction lines need to be connected at the installation site.

A light-weight and compact unit easy to install in a backyard or on a roof above the cooling sites.

Thoroughly tested - meet all International, Danish and naturally our own quality requirements.

We recommend installation of several units on the same location in the event of capacity requirement exceeding 9 kW.