compunere portiera lupo
TRANSCRIPT
Front door Assembly overview The hinge bolts must always be replaced if loosened.
Note:
The dash panel must be removed to remove and adjust the upper door hinges.
1. Door Removing and installing => Page 57-7 Adjusting =>Page 57-8
2. Door handle with base
Removing and installing => Page 57-13
3. Lock cylinder housing
Removing => Page 57-11
4. Cover cap 5. Screw
20 Nm
6. Locking button
Removing and installing => Page 57-18
7. Locking rod 8. Screw
20 Nm 9. Lock plate
10. Door lock Removing and installing => Page 57-16
11. Bowden cable 12. Interior release
handle
Стр. 1 из 4General body repairs exterior
31.03.2013vw-wi://rl/V.en-GB.6X-KM-KMA.wi::605724.xml?xsl=2
13. Multi-point socket head bolt
20 Nm
14. Seal 15. Hook 16. Door arrester
Removing and installing => Page 57-17
17. Cover 18. Hexagon nut
9 Nm 19. Screw
7.2 Nm 20. Anti-friction foil
(Lupo 3L, FSI, GTI) Contact corrosion => Page 57-1
21. Screw 20 Nm + 1/4 turn
Стр. 2 из 4General body repairs exterior
31.03.2013vw-wi://rl/V.en-GB.6X-KM-KMA.wi::605724.xml?xsl=2
further (90°) Always renew bolt after loosening
22. Cover cap
23. Grub screw
23 Nm Only remove this bolt from hinge to remove door
24. Door hinge 25. Multi-point
socket head bolt
M8 x 22 Install from inside vehicle To loosen or tighten the bolt,
Стр. 3 из 4General body repairs exterior
31.03.2013vw-wi://rl/V.en-GB.6X-KM-KMA.wi::605724.xml?xsl=2
remove and install dash panel
=> General body repairs, interior; Repair group 70; Dash panel
20 Nm + 1/4 turn further (90°) Always renew bolt after loosening
26. Multi-point socket head bolt
M8 x 28 20 Nm + 1/4 turn further (90°) Always renew bolt after loosening
Стр. 4 из 4General body repairs exterior
31.03.2013vw-wi://rl/V.en-GB.6X-KM-KMA.wi::605724.xml?xsl=2