comtech new products 2010 · 2010 new products may, 2010 new products (1) 4% omi can be adjusted in...
TRANSCRIPT
2010New Products
COMTECHNew Products
2010
Good quality at a competitive
price from Europe
www.comtech.co.hu
HU11594Q
About us
Comtech Ltd. was founded in 1990 as a 100
percent Hungarian private property company.
The company produces cable television equip-
ments. Our premise and production area is
situated in Hungary, Gyôr. The number of em-
ployees is around 50.
We produce the total range of active HFC ele-
ments, for example: optical nodes and headend
optical transmitters and receivers, trunk-, line-,
house amplifiers. We also produce Headend RF
signal organizer products which help to handle
the return paths data transfer. Our most suc-
cessful product is our network-management
system which can be built in all of our products.
It helps the economical and reliable operation of
interactive HFC networks assured by „triple play”
function.
Our products are our own developments, they
meet the most up-to-date requirements and
their prices are very competitive. We also sa-
tisfy unique and special requests.
Our company is certified by ISO9001. Reliabi-
lity is guaranted by the closed control and test
process. Every products comply with EU and
CE standars. When making our offers we are
trying to give the best possible delivery times
to our customers as we have an appropriate
stock and flexible employees.
Our products are sold to the domestic and the
European customers. We have representatives
in many countries. Our most important refer-
ences are: Magyar Telekom, Fibernet, UPC,
Tarr, Siemens, Synergon, Smartcable and other
hundreds of Hungarian and foreign users. Our
company is a SCTE member too.
For customers guidance and service we have a
qualified team. You can find help also from our
catalogue or webpage or user guides. We have
20 years experience in CATV business and our
effort is to be your reliable and competitive
supplier.
2010New ProductsNew Products May, 2010
Table of contents
HEADEND OPTICAL PRODUCTS..........................................................................................2
SFOR1000 Forward path optical receiver.............................................................................................................2
OPTICAL NODES...............................................................................................................4
MO1004 Optical node.......................................................................................................................................... 4
MO1003 Optical node ......................................................................................................................................... 8
FOR1000H Forward path optical receiver module..............................................................................................12
FOR1000F Forward path optical receiver module..............................................................................................14
DISTRIBUTION AMPLIFIERS.............................................................................................16
MT1000 Series mini trunk amplifiers..................................................................................................................16
MB1000 Series mini bridger amplifiers..............................................................................................................19
LE1000 Series line amplifiers.............................................................................................................................22
MONITORING PRODUCTS.................................................................................................25
Standard HMS transponders (Pre-liminary)........................................................................................................25
NMT-COM4 Monitoring transponder module......................................................................................................27
RBS622Q-C Return path amplifier module with monitoring option.....................................................................29
NMT-HLW3 Monitoring transponder module for Harmonic optical nodes...........................................................30
RSW-H4 Return path switch module into Harmonic HLN-384x optical node.......................................................32
Specifications are subject to change without notice!
1 PG-2010-05-EN
New Products May, 2010
HEADEND OPTICAL PRODUCTS
SFOR1000 FORWARD PATH OPTICAL RECEIVER
• Frequency range up to 1GHz
• Connection to the Monitoring System
• RF testpoint on the face
• Redundant RF input for a secondary receiver
• Display and knobs on the face
• Excellent price/value ratio
TECHNICAL SPECIFICATIONS ___________________________________________________________
Optical parameters
Wavelength [nm] 1280…1620
Input optical power [dBm] (2) -10…+3
Return loss of the optical input [dB] > 45
Equivalent input noise current [pA/√Hz] 7
Optical connector SC/APC, EURO-2000, FC/APC
RF parameters
Frequency range [MHz] 47 … 1000
Impedance [Ω] 75
Return loss [dB] > 16
Output level control OLC
Output level setup range [dBmV] (1,2) 28…44
AGC deviation [dB] ±1
Flatness [dB] ±0,5
Slope [dB] ±0,5
RF testpoint [dB] -20±0,5
Composite triple beat (CTB) [dBc] (3) > 72
Composite second order (CSO) [dBc] (3) > 68
General parameters
Current consumption [mA] 350
Power supply voltage [V] 24
Power consumption [W] 8,5
Temperature range [°C] 0…40
Dimensions [mm] 230x130x35
Weight [kg] 0,6
Specifications are subject to change without notice!
2 PG-2010-05-EN
2010New ProductsNew Products May, 2010
(1) 4% OMI can be adjusted in 0,5dB steps
(2) Recommended optical input and RF output power are indicated on the diagrams
(3) Output level <40dBm @ 4% OMI
PERFORMANCE DIAGRAMS____________________________________________________________
-10 -5 0 +5+3
88
90
94
96
95
100
104
Low CNR
CNR
decrease
Recommended
area
CTB, CSO decrease
RF Output
level [dBµV]
Optical Input
level [dBm]
-10 -5 0
Optical Input
level [dBm]
CNR [dB]
36384042444648505254565860
Based on 1310nm with 4% OMI.
+3
BLOCK DIAGRAM___________________________________________________________________
POWERSUPPLY
MICROCONTROLLLER
FRONTPANEL
A SUPPLY
B SUPPLY
RS485
SUMMARY ALARM
OPTICAL POWERMONITOR
TP-20dB
O/E ATT ATT
OUTPUTENABLE
or
DISABLE
75Ohm
ORDERING INFORMATION_____________________________________________________________
S F O R 1 0 0 0 - X X
Specifications are subject to change without notice!
3 PG-2010-05-EN
Optical connector
SA SC/APC (Recommended type)
FA FC/APC
EU EURO-2000
New Products May, 2010
OPTICAL NODES
MO1004 OPTICAL NODE
• Low noise optical receiver module
• Return path optical transmitter module
• Segmentation in forward and return path
• HFC and Fiber Deep versions
• 2 high-leveled RF outputs (splittable to 2x2)
• 1GHz GaAs or GaN Power-doubler hybrids
• Remote powered switching power supply
• Monitoring option
GENERAL DESCRIPTION______________________________________________________________
The optical node is available in different configurations. This depends on the configuration module which can be
ordered. CM5 configuration module allows (2 transmitter and 2 receiver modules) the segmented operation
mode in forward and return path too. Using CM6 configuration module – can be used 2 transmitter and 1
receiver modules – you can realize the return path segmentation. CM7 configuration module uses 1
transmitter and 1 receiver module – in this operation mode segmented operation is impossible. CM8
configuration module enables the redundant operation in forward and return path with 2 transmitters and 2
receivers. In basic configuration the device contains 1 optical receiver module (FOR1000H for HFC version or
FOR1000F for Fiber Deep version). For the optical node FP, DFB or CWDM return path optical transmitter, another
other receiver module as well as monitoring option can be added.
TECHNICAL SPECIFICATIONS ___________________________________________________________
Parameters of the optical receiver MO1004xH MO1004xF
Bandwidth [MHz] 47...1000
Wavelength [nm] 1290…1570
Optical input level range [dBm] -5…+3 -8…+3
Nominal optical input level [dBm] 0 -3
Return loss of the optical input [dB] > 45
Equivalent input noise [pA/√Hz] 7
RF level on the output of the receiver module (4% OMI) [dBµV] 79±1 76±1 @ 47MHz86±1 @ 1GHz
(862MHz)
TILT [dB] 0 10 (5)
Type of the optical connector SC/APC, FC/APC, EURO2000
Specifications are subject to change without notice!
4 PG-2010-05-EN
2010New ProductsNew Products May, 2010
Parameters of the optical transmitter
Bandwidth [MHz] 5-65
Wavelength [nm] 1310 or CWDM
Optical input level range [mW] FP: 1, DFB: 2, CWDM: 2 or 4
Type of the optical connector SC/APC, FC/APC, EURO-2000
RF input level (OUT1,2,10% OMI) [dBµV] 78±1
Flatness [dB] ±0,5
Input return loss (40MHz -1,5 dB/octave) [dB] > 18
Input impedance [Ω] 75
RF level on the testpoint of the optical transmitter (1) [dBµV] 70+1/-2
RF parameters MO1004Cx MO1004Dx
Forward path gain [dB] (2) 38
CTB [dB] -63 (3) -69 (4)
XMOD [dB] -59 (3) -64 (4)
CSO [dB] -64 (3) -70 (4)
CIN [dB] - 60 (4)
Output testpoint attenuation [dB] 30±1
Forward path RF testpoint attenuation [dB] (2) 0±1
Flatness [dB] ±0,7
Type of the output amplifier-module GaAs PD hybrid GaN PD hybrid
Number of active outputs 2
Output diplex filter [MHz] 30/47 or 65/85
Output return loss (40MHz -1,5 dB/octave) [dB] > 18
Output impedance [Ω] 75
Isolation between segments (forward path) [dB] > 65
Isolation between segments (return path) [dB] > 75
Breakpoint frequency of TILT [MHz] 606, 750, 862, 1000
Return path passive
General parameters
Screening factor [dB] 80
Maximum power consumption [W] 51
Power supply voltage [V-AC] 30...65; 35...90
Maximum current feed-through [A] 10
Hum modulation [dB] 70
Degree of protection IP 65
Temperature range [°C] -20 … +50
Type of the RF connector 5/8”
Dimensions [mm] 275x200x175
Weight [kg] 5,0
(1) 10% optical modulation index
(2) Gain parameters are relative to FOR output level
(3) 132 ch.flat, Vout:44dBmV
(4) 79 ch. 7dB tilted, Vout:50dBmV @ 550MHz, 75digital ch. -6dB offset
(5) TILT breakpoint frequency jumper adjustable - 862MHz or 1GHz
Specifications are subject to change without notice!
5 PG-2010-05-EN
New Products May, 2010
BLOCK DIAGRAM___________________________________________________________________
RF
SUPPLY
CM7
CM5
CM6
OUT 2
OUT 3
SURGEPROT
+ 24V DC
DC TP
SWITCHING POWER SUPPLY STATUS MONITORING SYSTEMAC FUSE
60V AC
TP-30dB
AC TP
DC IND
SURGEPROT
AC FUSE10 A
ACBYPASS
H
L
DIPLEXFILTER
POST AMPINT EQ ATT
ATTSWITCH
PRE AMP
CONFIGURATION MODULE
FULL SEGMENTATION
SEGMENTATION IN RETURN PATH
ROTxxx
ROTxxx
ROTxxx
ROTxxx
FOR1000x
FOR1000x
FOR1000x
TP-30dB
AC FUSE10 A
ACBYPASS
OUT 1
OUT 4
SURGEPROT
TP-30dB
SURGEPROT
AC FUSE10 A
ACBYPASS
H
L
POST AMP INT EQATT
ATT
SWITCH
PRE AMPSP2
TP-30dB
AC FUSE10 A
ACBYPASS
WITHOUT SEGMENTATION
DIPLEXFILTER
SP
DCor
TP 0 dB
TP 0 dB
FOR1000x
ROTxxx
CM8
ROTxxx
FOR1000x
REDUNDANCY
ROTxxx
FOR1000x
Specifications are subject to change without notice!
6 PG-2010-05-EN
2010New ProductsNew Products May, 2010
ORDERING INFORMATION_____________________________________________________________
M O 1 0 0 4 X X - X X - X X
Option Required modules Ordering codes
Monitoring option 1pc NMT-F, 2pcs RSW2-A NMT-Fxx, RSW2-A
CONFIGURATION POSSIBILITIES_________________________________________________________
Segmentation in forward and return path Required modules Ordering codes
Configuration module 1pc CM5 configuration module CM5
Return path optical transmitter(s) 2pcs ROT61F, ROT62D, ROT62C ROT6xx-xxxx-xx
Forward path optical receiver(s) 2pcs FOR1000x (one is contained) FOR1000H or FOR1000F
Segmentation in return path Required modules Ordering codes
Configuration module 1pc CM6 configuration module CM6
Return path optical transmitter(s) 2pcs ROT61F, ROT62D, ROT62C ROT6xx-xxxx-xx
Forward path optical receiver 1pc FOR1000x (contained) FOR1000H or FOR1000F
No segmentation Required modules Ordering codes
Configuration module 1pc CM7 configuration module CM7
Return path optical transmitter(s) 1pc ROT61F, ROT62D, ROT62C ROT6xx-xxxx-xx
Forward path optical receiver 1pc FOR1000x (contained) FOR1000H or FOR1000F
Redundancy in forward and return path Required modules Ordering codes
Configuration module 1pc CM8 configuration module CM8
Return path optical transmitter(s) 2pcs ROT61F, ROT62D, ROT62C ROT6xx-xxxx-xx
Forward path optical receiver(s) 2pcs FOR1000x (one is contained) FOR1000H or FOR1000F
Specifications are subject to change without notice!
7 PG-2010-05-EN
Forward path module
H FOR1000H (Standard type)
F FOR1000F (Fiber Deep type)
Amplifier-module type
C GaAs
D GaN
Type of the diplex filter
30 Internal 30/47MHz diplex filter
65 Internal 65/85MHz diplex filter
Optical connector
SA SC/APC (Recommended type)
FA FC/APC
EU EURO-2000
New Products May, 2010
MO1003 OPTICAL NODE
• Low noise optical receiver module
• Return path optical transmitter module
• Possibility of segmentation and redundancy
• Pull-out internal casting tray electronics
• HFC and Fiber Deep versions
• 3 high-leveled RF outputs
• 1GHz GaAs or GaN Power-doubler hybrids
• Remote powered switching power supply
• Status monitoring option
GENERAL DESCRIPTION______________________________________________________________
The optical node is available in different configurations. This depends on the configuration module which can be
ordered. In normal configuration node contains the CM1 configuration module which allows the operation of 1
transmitter and 1 receiver. The second configuration allows the redundant operation by the CM2 configuration
module. With this module 2 transmitters and 2 receivers can be operated. With CM3 configuration module you
can realize the segmentation. This module supports 3 transmitters and 1 receiver. With CM4 configuration
module you can realize the partial segmentation. This module supports 2 transmitters and 1 receiver. The
block- diagrams of these modules can be seen under the node's block- diagram.
In basic configuration the device contains 1 receiver module (FOR1000H for HFC version or FOR1000F for
Fiber Deep version). For the optical node an FP, DFB or CWDM-ITU return path optical transmitter, another optical
receiver module as well as the monitoring option can be ordered.
TECHNICAL SPECIFICATIONS ___________________________________________________________
Parameters of the optical receiver MO1003xH MO1003xF
Bandwidth [MHz] 47...1000
Wavelength [nm] 1290…1570
Optical input level range [dBm] -5…+3 -8…+3
Nominal optical input level [dBm] 0 -3
Return loss of the optical input [dB] > 45
Equivalent input noise [pA/√Hz] 7
RF level on the output of the receiver module (4% OMI) [dBµV] 79±1 76±1 @ 47MHz86±1 @ 1GHz
(862MHz)
TILT [dB] 0 10 (5)
Type of the optical connector SC/APC, FC/APC, EURO2000
Specifications are subject to change without notice!
8 PG-2010-05-EN
2010New ProductsNew Products May, 2010
Parameters of the optical transmitter
Bandwidth [MHz] 5-65
Wavelength [nm] 1310 or CWDM
Output power [mW] FP: 1, DFB: 2, CWDM: 2, 4
Type of the optical connector SC/APC, FC/APC, EURO-2000
RF input level (OUT1,2,3 10% OMI) [dBµV] 78±1
Flatness [dB] ±0,5
Input return loss (40 MHz -1,5 dB/octave) [dB] > 18
Input impedance [Ω] 75
RF level on the testpoint of the optical transmitter (1) [dBµV] 70+1/-2
RF parameters MO1003Cx MO1003Dx
Forward path gain [dB] (2) 36
CTB [dB] -63 (3) -69 (4)
XMOD [dB] -59 (3) -64 (4)
CSO [dB] -64 (3) -70 (4)
CIN [dB] - 60 (4)
Output testpoint attenuation [dB] 30±1
Forward path RF testpoint attenuation (TP4) [dB] (2) 0±1
Flatness [dB] ±0,7
Type of the output amplifier-module GaAs PD hybrid GaN PD hybrid
Number of active outputs 3
Output diplex filter [MHz] 30/47 or 65/85
Output return loss (40 MHz -1,5 dB/octave) [dB] > 18
Output impedance [Ω] 75
Breakpoint frequency of TILT [MHz] 606, 750, 862, 1000
Return path passive
General parameters
Screening factor [dB] 80
Maximum power consumption [W] 56
Power supply voltage [V-AC] 30...65; 35...90
Maximum current feed-through [A] 10
Hum modulation [dB] 70
Degree of protection IP 65
Temperature range [°C] -20…+50
Type of the RF connector 5/8”
Dimensions [mm] 275x172x170
Weight [kg] 3,9
(1) 10% optical modulation index
(2) Gain parameters are relative to FOR output level
(3) 132 ch.flat, Vout:44dBmV
(4) 79 ch. 7dB tilted, Vout:50dBmV @ 550MHz, 75digital ch. -6dB offset
(5) TILT breakpoint frequency jumper adjustable - 862MHz or 1GHz
Specifications are subject to change without notice!
9 PG-2010-05-EN
New Products May, 2010
BLOCK DIAGRAM___________________________________________________________________
TP0dB
CM4
CM3
CM1
CM2
SUPPLY
OUT1 OUT 2
OUT 3
SURGEPROT
H
L
+ 24V DC
DC TP
SWITCHING POWER SUPPLY STATUS MONITORING SYSTEM
POST AMP
DIPLEXFILTER
AC FUSE10 A
ACBYPASS
AC FUSE
60V AC
TP-30dB
AC TP
POST AMPINT EQ
INT EQ ATT
ATT
DC IND
H
L
ATTSWITCH
SURGEPROT
AC FUSE10 A
ACBYPASS
TP-30dB
H
L
DIPLEXFILTER
ATTSWITCH
POST AMP INT EQATT
ATT
SWITCH
SURGEPROT
AC FUSE10 A
ACBYPASS
TP-30dB
PRE AMP
RFCONFIGURATION MODULE
REDUNDANCY
SEGMENTATION
ROTxxx
FOR1000x
FOR1000x
ROTxxx
ROTxxx
ROTxxx
FOR1000x
ROTxxx
ROTxxx
FOR1000x
PARTIALSEGMENTATION
FOR1000x
ROTxxx
ROTxxx
NORMAL
Specifications are subject to change without notice!
10 PG-2010-05-EN
2010New ProductsNew Products May, 2010
ORDERING INFORMATION_____________________________________________________________
M O 1 0 0 3 X X - X X - X X
Option Required modules Ordering information
Monitoring 1pc NMT-O, 3pcs RSW2-A NMT-Oxx, RSW2-A
CONFIGURATION POSSIBILITIES_________________________________________________________
Normal Required modules Ordering information
Configuration module 1pc CM1 configuration module CM1
Return path optical transmitter(s) 1pc ROT61F, ROT62D, ROT62C ROT6xx-xxxx-xx
Forward path optical receiver 1pc FOR1000x (contained) FOR1000H or FOR1000F
Redundant Required modules Ordering information
Configuration module 1pc CM2 configuration module CM2
Return path optical transmitter(s) 2pcs ROT61F, ROT62D, ROT62C ROT6xx-xxxx-xx
Forward path optical receiver(s) 2pcs FOR1000 (one is contained) FOR1000H or FOR1000F
Segmentated Required modules Ordering information
Configuration module 1pc CM3 configuration module CM3
Return path optical transmitter(s) 3pcs ROT61F, ROT62D, ROT62C ROT6xx-xxxx-xx
Forward path optical receiver 1pc FOR1000x (contained) FOR1000H or FOR1000F
Partially segmentated Required modules Ordering information
Configuration module 1pc CM4 configuration module CM4
Return path optical transmitter(s) 2pcs ROT61F, ROT62D, ROT62C ROT6xx-xxxx-xx
Forward path optical receiver 1pc FOR1000x (contained) FOR1000H or FOR1000F
Specifications are subject to change without notice!
11 PG-2010-05-EN
Forward path module
H FOR1000H (Standard type)
F FOR1000F (Fiber Deep type)
Amplifier-module type
C GaAs
D GaN
Type of the diplex filter
30 Internal 30/47MHz diplex filter
65 Internal 65/85MHz diplex filter
Optical connector
SA SC/APC (Recommended type)
FA FC/APC
EU EURO-2000
New Products May, 2010
FOR1000H FORWARD PATH OPTICAL RECEIVER MODULE
• SC/APC, EURO2000, FC/APC optical connector
(optional)
• Receiving wavelengths 1290-1620 nm
• Temperature-compensated construction
• Frequency range 47-1000 MHz
• Connection to the Monitoring System
• Monitoring of the input optical level
• Standard HFC applications
TECHNICAL SPECIFICATIONS ___________________________________________________________
Parameters of the optical receiver FOR1000H
Wavelength [nm] 1290…1620
Optical input level range [dBm] -5…+3
Optical return loss [dB] > 45
Optical level (testpoint) [V/mW] 1
Nominal optical input level [dBm] 0
RF parameters
Bandwidth [MHz] 47…1000
Equivalent input noise [pA/Hz] 7
Level control OLC
Output level (4% OMI) [dBµV] 79
Output level accuracy [dB] ±1
Flatness [dB] ±0,7
General parameters
Current consumption [mA] 60
Power supply voltage [V] +24
Temperature range [°C] -40…+70
Type of the optical connector SC/APC, EURO2000, FC/APC
Specifications are subject to change without notice!
12 PG-2010-05-EN
2010New ProductsNew Products May, 2010
BLOCK DIAGRAM___________________________________________________________________
ATT
POWERSUPPLY
MICROCONTROLLER
OPTICALINPUT
TP
O
E
OPT Power
FOR1000H
ORDERING INFORMATION_____________________________________________________________
F O R 1 0 0 0 H - X X
In basic configuration the MO1003xH and MO1004xH contains 1 FOR1000H module. You have to buy other
modules for segmented and redundant operation!
Specifications are subject to change without notice!
13 PG-2010-05-EN
Type of the optical connector
SA SC/APC (Recommended type)
FA FC/APC
EU EURO2000
New Products May, 2010
FOR1000F FORWARD PATH OPTICAL RECEIVER MODULE
• SC/APC, EURO2000, FC/APC optical connector
(variable)
• Receiving wavelengths 1290-1620 nm
• Temperature-compensated construction
• Frequency range 47-1000 MHz
• Connection to the Monitoring System
• Monitoring of the input optical level
• Fiber Deep version with higher output level
TECHNICAL SPECIFICATIONS ___________________________________________________________
Parameters of the optical receiver FOR1000F
Wavelength [nm] 1290…1620
Optical input level range [dBm] -8…+3
Optical return loss [dB] > 45
Optical level (testpoint) [V/mW] 1
Nominal optical input level [dBm] -3
RF parameters
Bandwidth [MHz] 47…1000
Equivalent input noise [pA/Hz] 7
Level control OLC
Output level @ 47MHz (4% OMI) [dBµV] 76
Output level @ 1GHz (4% OMI) [dBµV] 86
Output level accuracy [dB] ±1
TILT [dB] (1) 10
Flatness [dB] ±0,7
General parameters
Current consumption [mA] 90
Power supply voltage [V] +24
Temperature range [°C] -40…+70
Type of the optical connector SC/APC, EURO2000, FC/APC
(1) TILT breakpoint frequency jumper adjustable - 862MHz or 1GHz
Specifications are subject to change without notice!
14 PG-2010-05-EN
2010New ProductsNew Products May, 2010
BLOCK DIAGRAM___________________________________________________________________
POWERSUPPLY
MICROCONTROLLER
OPTICALINPUT
TP
O
E
OPT Power
ATTATT EQ
862MHz
1GHzor
ORDERING INFORMATION_____________________________________________________________
F O R 1 0 0 0 F - X X
In basic configuration the MO1003xF and MO1004xF contains 1 FOR1000F module. You have to buy other modules
for segmented and redundant operation!
Specifications are subject to change without notice!
15 PG-2010-05-EN
Type of the optical connector
SA SC/APC (Recommended type)
FA FC/APC
EU EURO2000
New Products May, 2010
DISTRIBUTION AMPLIFIERS
MT1000 SERIES MINI TRUNK AMPLIFIERS
• Outdoor aluminium casting case
• Pull-out internal casting tray electronics
• Internal diplex filters
• One trunk, one bridger output (splittable)
• Internal return path hybrid module
• 1GHz GaAs or GaN Power-doubler hybrids
• Remote powered switching power supply
• Pilot control option
• Return path noise switch-off option
• Status monitoring option
TECHNICAL SPECIFICATIONS ___________________________________________________________
RF parameters MT10xxC-xx MT10xxD-xx
Amplifier-module GaAs PD hybrid GaN PD hybrid
Number of active outputs 1 trunk, 1 bridger
Forward path bandwidth [MHz] 47-1000 or 85-1000
Return path bandwidth [MHz] 5-30 or 5-65
Type of diplex filter [MHz] 30/47, 65/85 (1)
Gain on trunk output [dB] 32, 36, 42 (1)
Gain on bridger output [dB] 36, 40, 46 (1)
Flatness [dB] ±0,5
CTB [dB] -63 (3) -69 (4)
XMOD [dB] -59 (3) -64 (4)
CSO [dB] -64 (3) -70 (4)
CIN [dB] - 60 (4)
Manual level setup (2 dB steps) [dB] Plug-in 0-20
Manual TILT setup (2 dB steps) [dB] Plug-in 0-22
Breakpoint frequency of TILT [MHz] 302, 606, 750, 862, 1000
ASG insertion loss (20°C) [dB] 6,5
ASG control range [dB] ±4
ASG flatness [dB] ±0,5
Noise figure [dB] 7
Testpoints' attenuation (inputs, outputs) [dB] -30±1
Return loss (40 MHz -1,5 dB/octave) [dB] 18
Return path gain [dB] 20
Specifications are subject to change without notice!
16 PG-2010-05-EN
2010New ProductsNew Products May, 2010
CTB in return path [dB] -66 (2)
CSO in return path [dB] -70 (2)
Return path TILT (plug-in) [dB] 2, 4, 6, 8, 10
Breakpoint frequency of TILT [MHz] 30, 65
Connecting impedance [Ω] 75
Bridger output splitter, directional coupler [dB] Plug-in 4, 8, 12, 16
Screening factor [dB] 80
General parameters
Maximum power consumption [W] 38
Power supply voltage [V] 30-65; 35-90
Class of electric shock protection III.
Maximum current feed-through [A] 10
Hum modulation [dB] 70
Degree of protection IP 65
Temperature range [°C] -40 … +60
Type of connector 5/8”
Dimensions [mm] 275x172x122
Weight [kg] 3,5
(1) The value of gain and the diplex filters can be found in the typechart
(2) Measured with 7 channels load in case of 110dBμV output level
(3) 132 ch.flat, Vout:44dBmV
(4) 79 ch. 7dB tilted, Vout:50dBmV @ 550MHz, 75digital ch. -6dB offset
BLOCK DIAGRAM___________________________________________________________________
SURGEPROT
SURGEPROT
SURGEPROT
SURGEPROT
H
L
H
L
H
L
ASG
SUPPLY
+ 24V DC
DC TP
SWITCHING POWER SUPPLY
RF
STATUS MONITORING SYSTEM
STAT. MON.
INTERFACE
EQ1
EQ4
AT1
AT3
PRE AMP EQ2 BRIDG. AMP
BRIDG. AMPEQ3
ASG ATT
REV AMPRSW2
RSW1
SD
AC FUSE10 A
AC FUSE10 A
AC FUSE10 A
AC FUSE10 A
ACBYPASS
ACBYPASS
ACBYPASS
ACBYPASS
AC FUSE
60V AC
SPorDC
TP1-30dB
TP4-30dB
TP2-30dB
TP3-30dB
REV. INJ-20dB
AC TP
BRIDGEOUT1
OUT 3BRIDGE
OUT 2BRIDGE
DC PWR
DF1
DF2
DF3 F3
F2F1
F4
30, 65 MHz
RELPF
BEQ
AT3
AT2
Specifications are subject to change without notice!
17 PG-2010-05-EN
New Products May, 2010
ORDERING INFORMATION_____________________________________________________________
M T 1 0 X X X - X X R X X
Options Required modules
ASG option 1pc ASG 535-C, 1pc BEQxxx-A, 1pc ATxx
Monitoring option 1pc NMT-F, 2pc RSW2-A
Specifications are subject to change without notice!
18 PG-2010-05-EN
Gain
32 Trunk: 32dB / Bridger: 36dB
36 Trunk: 36dB / Bridger: 40dB
42 Trunk: 42dB / Bridger: 46dB
Amplifier-module type
C GaAs
D GaN
Type of the diplex filter
30 Internal 30/47MHz diplex filter
65 Internal 65/85MHz diplex filter
Return path gain
20 20 dB
25 25 dB
2010New ProductsNew Products May, 2010
MB1000 SERIES MINI BRIDGER AMPLIFIERS
• Outdoor aluminium casting case
• Pull-out internal casting tray electronics
• Internal diplex filters
• Two active outputs (either of them is splittable)
• Internal return path hybrid module
• 1GHz GaAs or GaN Power-doubler hybrids
• Remote powered switching power supply
• Pilot control option
• Return path noise switch-off option
• Status monitoring option
TECHNICAL SPECIFICATIONS ___________________________________________________________
RF parameters MB10xxC-xx MB10xxD-xx
Amplifier-module GaAs PD hybrid GaN PD hybrid
Number of active outputs 2 bridgers
Forward path bandwidth [MHz] 47-1000 or 85-1000
Return path bandwidth [MHz] 5-30 or 5-65
Type of diplex filter [MHz] 30/47, 65/85 (1)
Forward path gain [dB] 38, 42, 48 (1)
Flatness [dB] ±0,5
CTB [dB] -63 (3) -69 (4)
XMOD [dB] -59 (3) -64 (4)
CSO [dB] -64 (3) -70 (4)
CIN [dB] - 60 (4)
Manual level setup (2 dB steps) [dB] Plug-in 0-20
Manual TILT setup (2 dB steps) [dB] Plug-in 0-22
Breakpoint frequency of TILT [MHz] 302, 606, 750, 862, 1000
ASG insertion loss (20°C) [dB] 6,5
ASG control range [dB] ±4
ASG flatness [dB] ±0,5
Noise figure [dB] 7
Testpoints' attenuation (inputs, outputs) [dB] -30±1
Return loss (40 MHz -1,5 dB/octave) [dB] 18
Return path gain [dB] 20
CTB in return path [dB] -66 (2)
CSO in return path [dB] -70 (2)
Return path TILT (plug-in) [dB] 2, 4, 6, 8, 10
Breakpoint frequency of TILT [MHz] 30, 65
Specifications are subject to change without notice!
19 PG-2010-05-EN
New Products May, 2010
Connecting impedance [Ω] 75
Bridger output splitter, directional coupler [dB] Plug-in 4, 8, 12, 16
Screening factor [dB] 80
General parameters
Maximum power consumption [W] 38
Power supply voltage [V] 30-65; 35-90
Class of electric shock protection III.
Maximum current feed-through [A] 10
Hum modulation [dB] 70
Degree of protection IP 65
Temperature range [°C] -40 … +60
Type of connector 5/8”
Dimensions [mm] 275x172x122
Weight [kg] 3,5
(1) The value of gain and the diplex filters can be found in the typechart
(2) Measured with 7 channels load in case of 110dBμV output level
(3) 132 ch.flat, Vout:44dBmV
(4) 79 ch. 7dB tilted, Vout:50dBmV @ 550MHz, 75digital ch. -6dB offset
BLOCK DIAGRAM___________________________________________________________________
SURGEPROT
SURGEPROT
SURGEPROT
SURGEPROT
H
L
H
L
H
L
ASG
SUPPLY
+ 24V DC
DC TP
SWITCHING POWER SUPPLY
RF
STATUS MONITORING SYSTEM
STAT. MON.
INTERFACE
EQ1
EQ4
AT1
AT3
PRE AMP EQ2 BRIDG. AMP
BRIDG. AMPEQ3
ASG ATT
REV AMPRSW2
RSW1
SD
AC FUSE10 A
AC FUSE10 A
AC FUSE10 A
AC FUSE10 A
ACBYPASS
ACBYPASS
ACBYPASS
ACBYPASS
AC FUSE
60V AC
SPorDC
TP1-30dB
TP4-30dB
TP2-30dB
TP3-30dB
REV. INJ-20dB
AC TP
BRIDGEOUT1
OUT 3BRIDGE
OUT 2BRIDGE
DC PWR
DF1
DF2
DF3 F3
F2F1
F4
30, 65 MHz
RELPF
BEQ
AT3
AT2
Specifications are subject to change without notice!
20 PG-2010-05-EN
2010New ProductsNew Products May, 2010
ORDERING INFORMATION_____________________________________________________________
M B 1 0 X X X - X X R X X
OptionsRequired modules
ASG option 1pc ASG 535-C, 1pc BEQxxx-A, 1pc ATxx
Monitoring option 1pc NMT-F, 2pc RSW2-A
Specifications are subject to change without notice!
21 PG-2010-05-EN
Type of the diplex filter
30 Internal 30/47MHz diplex filter
65 Internal 65/85MHz diplex filter
Gain
38 38dB gain
42 42dB gain
48 48dB gain
Amplifier-module type
C GaAs
D GaN
Return path gain
20 20 dB
25 25 dB
New Products May, 2010
LE1000 SERIES LINE AMPLIFIERS
• Outdoor aluminium casting case
• Pull-out internal casting tray electronics
• Internal diplex filters
• Splittable high-leveled output
• Internal return path hybrid module
• 1GHz GaAs or GaN Power-doubler hybrids
• Remote powered switching power supply
• Pilot control option
• Return path noise switch-off option
• Status monitoring option
TECHNICAL SPECIFICATIONS ___________________________________________________________
RF parameters LE10xxC-xx LE10xxD-xx
Amplifier-module GaAs PD hybrid GaN PD hybrid
Forward path bandwidth [MHz] 47-1000 or 85-1000
Return path bandwidth [MHz] 5-30 or 5-65
Type of diplex filter [MHz] 30/47, 65/85 (1)
Forward path gain [dB] 36 / 42 / 46 (1)
Flatness [dB] ±0,75
CTB [dB] -63 (3) -69 (4)
XMOD [dB] -59 (3) -64 (4)
CSO [dB] -64 (3) -70 (4)
CIN [dB] - 60 (4)
Manual level setup (2 dB steps) [dB] Plug-in 0-20
Manual TILT setup (2 dB steps) [dB] Plug-in 0-22
Breakpoint frequency of TILT [MHz] 302, 606, 750, 862, 1000
ASG insertion loss (20°C) [dB] 6,5
ASG control range [dB] ±4
ASG flatness [dB] ±0,5
Noise figure [dB] 7
Testpoints' attenuation (inputs, outputs) [dB] -30±1
Return loss (40 MHz -1,5 dB/octave) [dB] 18
Return path gain [dB] 20(3)
CTB in return path [dB] -69(2)
CSO in return path [dB] -70(2)
Return path TILT [dB] Plug-in 2, 4, 6, 8, 10
Breakpoint frequency of TILT [MHz] 30, 65
Connecting impedance [Ω] 75
Specifications are subject to change without notice!
22 PG-2010-05-EN
2010New ProductsNew Products May, 2010
Output splitter, directional coupler [dB] Plug-in 4, 8, 12, 16
Screening factor [dB] 80
General parameters
Maximum power consumption [W] 25
Power supply voltage [V] 30-65; 35-90
Class of electric shock protection III.
Maximum current feed-through [A] 10
Hum modulation [dB] 70
Degree of protection IP 65
Temperature range [°C] -40 … +60
Type of connector 5/8”
Dimensions [mm] 275x172x122
Weight [kg] 3,5
(1) The value of gain and the diplex filters can be found in the typechart
(2) Measured with 7 channels load in case of 110dBμV output level
(3) 132 ch.flat, Vout:44dBmV
(4) 79 ch. 7dB tilted, Vout:50dBmV @ 550MHz, 75digital ch. -6dB offset
BLOCK DIAGRAM___________________________________________________________________
Specifications are subject to change without notice!
23 PG-2010-05-EN
SURGEPROT
SURGEPROT
SURGEPROT
H
L
ASG
SUPPLY
+ 24V DC
DC TP
SWITCHING POWER SUPPLY
RF
STATUS MONITORING SYSTEM
STAT. MON.
INTERFACE
EQ1
EQ3
AT1
AT2
PRE AMP BEQ EQ2REQ POST AMP
ASG ATT
DF1
REV AMP RSW
SD AC FUSE10 A
AC FUSE10 A
AC FUSE10 A
ACBYPASS
ACBYPASS
ACBYPASS
AC FUSE
60V AC
SPorDC
TP1-30dB
TP2-30dB
TP3-30dB
REV. INJ-20dB
AC TP
OUT 1
OUT 2
H
L
DF2
DC PWR
30, 65 MHz
RELPF
IN
New Products May, 2010
ORDERING INFORMATION_____________________________________________________________
L E 1 0 X X X - X X R X X
OptionsRequired modules
ASG option 1pc ASG 535-C, 1pc BEQxxx-A, 1pc ATxx
Monitoring option 1pc NMT-F, 1pc RSW2-A
Specifications are subject to change without notice!
24 PG-2010-05-EN
Gain
36 Gain 36dB
42 Gain 42dB
46 Gain 46dB
Amplifier-module type
C GaAs
D GaN
Type of the diplex filter
30 Internal 30/47MHz diplex filter
65 Internal 65/85MHz diplex filter
Return path gain
20 20 dB
25 25 dB
2010New ProductsNew Products May, 2010
MONITORING PRODUCTS
STANDARD HMS TRANSPONDERS (PRE-LIMINARY)
• HMS 1.0
• Remote software update
• SNMP
• To Comtech and other vendors' amplifiers and
nodes
GENERAL INFORMATION______________________________________________________________
Comtech Ltd. started to develop and produce transponders 10 years ago. Present days around 15000
transponders can be found in our customers systems (Tarr Kft., T-Kábel). These transponders' physical conditions
(modulation, bit-rate) are in accordance with the HMS monitoring standard but the communication between
transponder and HMTS is realized by a unique protocol (which enables a much faster data-communication than
the HMS protocol). We have received a lot of demand for HMS compatibility, so at the end of the last year we
started developing our HMS compatible transponder.
The launch of the new transponder on the market is expected in june-july 2010.
ORDER INFORMATION_______________________________________________________________
TRANSPONDERS TO COMTECH PRODUCTS:
N M T H - F X X X MT800 series, MT1000 series, MB800 series, MB1000 series, LE800 series, LE1000 series, MO802R, MO804R, MO1004
N M T H - O X X X MO803R, MO1003
N M T H - C O M 1 - X X X MO801R
N M T H - C O M 2 - X X X MDO801x
N M T H - C O M 3 - X X X LA8xxR-A, LA836R-C, DA836x-C
N M T H - C O M 4 - X X X LA834R-H
Specifications are subject to change without notice!
25 PG-2010-05-EN
New Products May, 2010
TRANSPONDERS TO HARMONIC PRODUCTS:
N M T H - H L W 1 - X X X HLR-3830, Antec LLRX200
N M T H - H L W 2 - X X X HLN-3812
N M T H - H L W 3 - X X X HLN-3822, HLN-3842, HLN-3844
TRANSPONDERS TO KATHREIN PRODUCTS:
N M T H - K A T 1 - X X X VGF amplifiers
TRANSPONDERS TO MOTOROLA PRODUCTS:
N M T H - M O T 1 - X X X MB-87, MB-100
Specifications are subject to change without notice!
26 PG-2010-05-EN
Frequency range
85 85-88MHz
108 106-114MHz
2010New ProductsNew Products May, 2010
NMT-COM4 MONITORING TRANSPONDER MODULE
• Noise switch-off control
• Monitoring of the amplifier's parameters
• Monitoring of the signal and noise level in the
CATV system
• Remote software-update possibility
• Infrared data read-out
TECHNICAL SPECIFICATIONS ___________________________________________________________
Monitoring parameters
Monitored parameters
Peak value of remote power, operation power, operation temperature, measured return path noise on 6MHz on outputs, transponder's receiver and transmitter level.
Controlled parameters State of the noise switch-off module (Off, On, -6dB, Auto).
Monitored devices LA834R-H
RF parameters
Transmitter output level range [dBµV] 80-120
Receiver input level range [dBµV] 40-80
Output level accuracy [dB] ±3
Transmitter frequency [MHz] 18-28
Receiver frequency [MHz] 85-88 or 106-114
Transmitter and receiver frequency raster [kHz] 100
Transmitter and receiver frequency accuracy [kHz] 10
Isolation [dB] -60
Output impedance [Ω] 75
Modulation FSK±50kHz
General parameters
Baud rate [baud] 38400
Power supply voltage [VDC] 12
Power consumption [VA] 2,7
Temperature range [°C] -40…+60
Specifications are subject to change without notice!
27 PG-2010-05-EN
New Products May, 2010
BLOCK DIAGRAM___________________________________________________________________
ORDERING INFORMATION_____________________________________________________________
N M T - C O M 4 - X X X
Specifications are subject to change without notice!
28 PG-2010-05-EN
Receiving frequency range
85 85-88MHz
108 106-114MHz
INFRA
DET
RX
TX
POWERSUPPLY
C°
0 dB-6 dB
-60 dB
MICROCONTROLLER
OUT INReturn Path DC24V RF OUT RF INAC60V
2010New ProductsNew Products May, 2010
RBS622Q-C RETURN PATH AMPLIFIER MODULE WITH MONITORING OPTION
• High output level
• Plug-in construction
• Flat frequency response
• Excellent return loss parameters
• Built-in noise switch-off
• Noise monitoring
• Monitoring option for LA834R-H amplifiers
TECHNICAL SPECIFICATIONS ___________________________________________________________
Frequency range [MHz] 5-65
Gain (at On state) [dB] 22
Gain (at -6dB state) [dB] 16
Attenuation (at Off state) [dB] > 60
Maximum output level (IMA-III. B-60 dB) [dBµV] 116
Maximum output level (IMA-II. B-60 dB) [dBµV] 119
Return loss [dB] > 18
Return loss (Off state) [dB] > 22
Monitored noise bandwith [MHz] 5,9-6,1
Supply voltage [V] 12
Current consumption (at On state)[mA] 180
Current consumption (at Off state)[mA] 50
Temperature range [°C] -40 … +60
BLOCK DIAGRAM___________________________________________________________________
ORDERING INFORMATION_____________________________________________________________
R B S 6 2 2 Q - C
Specifications are subject to change without notice!
29 PG-2010-05-EN
RBS622Q-C
0 dB-6 dB
Controller (0dB; -6dB; -60dB))
REV-OUTREV-IN CONTROLLINGDETECTEDNOISE LEVEL
INDICATOR(6 MHz)
-60dB
+12V
New Products May, 2010
NMT-HLW3 MONITORING TRANSPONDER MODULE FOR HARMONIC OPTICAL NODES
• Noise switch-off control
• Monitoring of the node's parameters
• Monitoring of the signal and noise level in the
CATV system
• Remote software-update possibility
• Infrared data read-out
• Supported optical nodes: HLN-3822, HLN-384x
TECHNICAL SPECIFICATIONS ___________________________________________________________
Monitoring parameters
Optical node's monitored parameters
Peak value of remote power, operation power supplies (12V, 24V), operation temperature, measured return path noise on 6MHz on outputs, transponder's receiver and transmitter level, receiver's and transmitter's power, laser current.
Controlled parameters State of the noise switch-off module (Off, On, -6dB, Auto).
Monitored device HLN-3822,HLN-384x
RF parameters
Transmitter output level range [dBµV] 80-110
Receiver input level range [dBµV] 40-80
Output level accuracy [dB] ±3
Transmitter frequency [MHz] 18-28
Receiver frequency [MHz] 85-88 or 106-114
Transmitter and receiver frequency raster [kHz] 100
Transmitter and receiver frequency accuracy [kHz] ±10
Isolation [dB] -60
Output impedance [Ω] 75
Modulation FSK±50kHz
General parameters
Baud rate [baud] 38400
Power supply voltage [VDC] +12
Power consumption [VA] 2,7
Temperature range [°C] -40…+60
Specifications are subject to change without notice!
30 PG-2010-05-EN
2010New ProductsNew Products May, 2010
BLOCK DIAGRAM___________________________________________________________________
ORDERING INFORMATION_____________________________________________________________
N M T - H L W 3 - X X X
Option Required modulesOrdering information
Noise switch-off option HLN-3822 1pc RSW-H3 return path noise switch-off module RSW-H3
Noise switch-off option HLN-384x 1pc RSW-H4 return path noise switch-off module RSW-H4
Specifications are subject to change without notice!
31 PG-2010-05-EN
Receiving frequency range
85 85-88MHz
108 106-114MHz
RX
TX
POWERSUPPLY
C°
0 dB-6 dB
-50 dB
MICROCONTROLLER
OUT1Return Path
INFRA
DC12V RF OUT RF INDC24V
0 dB-6 dB
-50 dB
OUT2Return Path
OPT RX
OPT TX
New Products May, 2010
RSW-H4 RETURN PATH SWITCH MODULE INTO HARMONIC HLN-384X OPTICAL NODE
• Controlled by the NMT-HLW3 module
• Plug-in construction
• High suppression loss
• Low insertion loss
• Three switching states
• State-indication by LED's
TECHNICAL SPECIFICATIONS ___________________________________________________________
Frequency range [MHz] 5-65
Insertion loss (at On state) [dB] 0,6 ± 0,2
Insertion loss (at -6dB state) [dB] -7 ± 0,5
Insertion loss (at Off state) [dB] (5-30 MHz)(30-65 MHz)
> 50> 40
Maximum output level (IMA III. B-60 dB) [dBµV] 117
Maximum output level (IMA II. B-60 dB) [dBµV] 116
Return loss (at Off state) [dB] > 20
Return loss (at On state) [dB] > 20
Temperature range [°C] -40…+60
Power supply voltage [V] +5
Current consumption (at Off state) [mA] 20
Current consumption (at On state) [mA] 30
Control voltage switch Off [VDC] 5
Control voltage switch On [VDC] 0
BLOCK DIAGRAM___________________________________________________________________
ORDERING INFORMATION_____________________________________________________________
R S W - H 4 Return path switch module into HLN-384x optical node
Specifications are subject to change without notice!
32 PG-2010-05-EN
RSW-H4
IN1
+24V
0 dB-6 dB
-50 dB
OUT1-50dB
DET
CONTROLLING
IN20 dB
-6 dB-50 dB
OUT2-50dB
MUX
CONTROLLER
RSW-H4
IN1
+24V
0 dB-6 dB
-50 dB
OUT1-50dB
DET
CONTROLLING
IN20 dB
-6 dB-50 dB
OUT2-50dB
MUX
CONTROLLER
NMT-HLW3
2010New Products
Distributors, partners:
COMTECH Communication-technology Ltd.H-9028 GYÕR, Török Ignác u. 66.
Tel.: +36 (96) 412 299Fax:+36 (96) 511 200
E-mail: [email protected],[email protected]
Schaffelhofer CATV-ServiceKalchgruberweg 94210 UnterweitersdorfAustriaTel.: +43 7235 649211Fax: +43 7235 649214E-mail: [email protected]
Normann Engineering GmbHLinzer str. 139A-4600 WelsAustriaTel.: +43 7242 70 921-0Fax: +43 7242 70 921-20E-mail: [email protected](Only monitoring system)
KABELKON, The Authorized Channel PartnerCart. Florilor 41/E535500 GheorgheniRomaniaRomaniaTel.: +40266364525Fax: +40266364080E-mail : [email protected]
EuroMedia-Service GmbH Willi-Bleicher strasse 3552353 Düren Germany Tel.: +49 2421 6936051 Fax: +49 2421 6932179E-mail: [email protected] (Only monitoring system)
TELETRONIC PLUS SRLArad, Str. Roman Ciorogariu, Nr.33Judetul AradRomaniaTel.: +40 743137106Tel./Fax: +40 3574 07 080E-mail: [email protected]
SmartCable Technology BVHoogstad 2593131 KX VlaardingenThe NetherlandsTel.: +31 10 248 0630Fax: +31 10 248 0631E-mail: [email protected]
XD VISION, s.r.o.Vyšehradská 885106 BratislavaSlovakiaTel.: +421 25363 1314,5Fax: +421 25363 1316E-mail: [email protected]
JJJ SAT & BESIE s.r.o.Strešovická 35Praha 6, 16200Czech RepublicTel.: +420 233 090 050Fax: +420 233 090 055E-mail: [email protected]
IPMEDIA International GmbHHermannstrasse 1931180 GiesenGermanyTel.:+49 (0) 5066 90 21 24Fax:+49 (0) 5066 90 21 25E-mail: [email protected]