Conbrov T33 Mini Spy Camera User Manual

Model No.: T33

Table of Contents

Part 1:Before First Use ............................................1-2

Part 2:Quick Guide ....................................................3

Part 3: Detailed User Manual ............................... 4-17

Part 3 Detailed User Manual

Warning on Invasion of Privacy......................................5

What's Included ..........................................................6

T33 Diagram............................................................... 7

Before Using Your Conbrov T33 Camera........................8

How to Use Your Conbrov T33 Camera .................... 9-17

1. How to Turn On the Camera/Record a Video ........... 12

2.How to Turn On/Off Motion Detection Recording......12

4.How to Read the Tray.............................................13

Specifications............................................. Technical . 14

LED Status................................................................ 15

FAQs........................................................................ 16

Warranty................................................................... 17

Disposal.................................................................... 17

Declaration of Conformity ............................................ 17

4Safety Precautions .....................................................

3.How to Switch into Night Vision Mode .....................12

1

Part1: Before First Use

Charging the camera

Before the first use, please charge the camera to full power.While charging, the LED light turns yellow and turns off when the camera is fully charged.

Yellow indicator Yellow indicator

Format the micro SD card

Before the first use, please install SD card and format it to FAT32 format. (Applicable to Windows system ONLY). The camera only supports class 10 micro SD cards with at least an 8GB capacity and a maximum capacity of 32GB.

Part1: Before First UseReset the camera

If the camera malfunctions for any reason, reset it with the included pin. A small paperclip can also be used.

2

R

Micro-SD USB

12S

Part2: Quick Guide

A. Install the microSD card B.Turn on and record

C. Turn off and save the video D.Play the video

If you need to set the video time watermark, please move to Page 10.

3

2S power off

2S power on

2

USB2.0

ON lights flash blue 3 times, the camera power on and enter into manual recording mode.

Install the micro SD card with contacts facing up

OFF lights flash red and blue alternately and then goes off, the video will be saved in the micro SD card and the camera turn off.

Micro-SD USB

Micro-SD USB

Safety Precautions

• Read this instruction manual carefully before using the camera. It contains important information for your safety as well as operating and maintenance instructions.• Follow all safety precautions in order to prevent damage due to improper use of the camera.• Keep this user manual for future use. Should this camera be passed along to a third party, this user manual should be handed on as well.• Use the camera only for its intended purpose.• In the event of improper use or erroneous handling, no liability can be assumed for any possible damage which may occur.• Never try to repair the camera yourself. Only allow qualified personnel to repair the camera in the event of malfunctions.• Warning! Never immerse the camera in water or other liquids while cleaning or operating it. Never hold the product under running water.• Do not open the housing under any circumstances. Do not introduce any metal objects into the interior of the housing.• Never use accessories which are not recommended by the manufacturer.• Keep the camera away from all hot surfaces and flames. Protect the camera from extreme heat and cold, dust, direct sunlight, humidity , and water.• Do not place heavy objects on the camera.The manufacturer is not responsible for any missing video data due to maloperation , micro SD card malfunctions, camera angle limitation, etc.

4

Warning on Invasion of Privacy

. The camera should be used for legal purpose only. Follow the laws of your country. Recording and circulating an image of an individual may constitute an infringement of their privacy for which you could be liable. Ask for authorization before filming individuals, particularly if you want to keep your recordings and/or circulate images on the Internet or any other medium. Do not circulate a degrading image or one which could undermine the reputation or dignity of an individual.

5

Conbrov T33 Spy Camera User Manual

Model No.: T33

What's Included

USB Cable

Card ReaderPin

6

Camera

User Manual

Magnetic Bracket

Conbrov T33 Mini Spy Camera User Manual

Model No.: T33

T33 Diagram

7

Reset

Power

USB

Micro SD Card Slot

MotionDetectionRecording

Power/REC

Before Using Your Conbrov T33 Camera

1. Charging your camera

Please refer to the picture above to insert the micro SD card into the slot. Pay attention to the direction, as the micro SD card only goes in one way. When inserting the micro SDcard, you need to press it until you hear a click sound.

.

Insert the micro SD card Remove the micro SD card

2. Install the micro SD card

8

(1) Plug the USB cable both in the camera and in a 5V adaptor or a computer USB port.While charging, the LED light stays on yellow. (2) The yellow LED goes off when the camera is fully charged.

Yellow indicator Yellow indicator

(with the contacts facing up)

Micro-SD USBMicro-SD USB

2S power on

Before Using Your Conbrov T33 Camera

3. Set Parameters

.(2)Press and hold the button for 2 seconds, the blue light stays on and the red light flashes, which indicates the camera enters into the reading tray mode and the disc icon will appear on your computer.

9

(1)Connect the camera to PC with the included USB cable.

(3)Open the removable disk, you can see "SetCamera"file, double-click the “SetCamera” file, and then you can see some related parameters including Language, Time Watermark, Date Format, Date, Time, Light Frequency, Image Quality, Overwrite and Audio.

Micro-SD USB

Before Using Your Conbrov T33 Camera

.

10

A. Setting Language: Click drop-down box on the right side of Language, choose suitable language, then click SAVE.

B. Setting Time Watermark: Click drop-down box on the right side of Time Watermark, choose Yes(shows the date and time) or No(no date and time) according to your need, then click SAVE.

C. Setting Date Format: Click drop-down box on the right side of Date Format, choose YY/MM/DD, DD/MM/YY or MM/DD/YY according to your need, then click SAVE.

D. Setting Date: Click up and down button on the right side of Date, modify the date number according to your need, then click SAVE.

E. Setting Time: Click up and down button on the right side of time, modify the time number according to your need, then click SAVE.

F. Setting Light Frequency (HZ): Click drop-down box on the right side of the Light Frequency, choose frequency standard suitable for your country, then click SAVE.

G . Setting Image Quality :Click drop-down box on the right side of the Image Quality, choose 1080P/720P/VGA according to your need, then click SAVE.

Before Using Your Conbrov T33 Camera

11

H. Setting Overwrite: Click drop-down box on the right side of Overwrite, choose On(loop recording on micro SD)or Off(no loop recording) according to your need, then click SAVE.

I . Setting Audio: Click drop-down box on the right side of Audio, choose On(turn on audio) or Off(turn off audio) according to your need, then click SAVE.

How to Use Your Conbrov T33 Camera

2.How to Turn On/Off Motion Detection Recording

(1) Press and hold the button for 2 seconds, the blue LED

will flash once and go off and the red light flashes 3 times

and then stays on , the camera turns on and enters into the motion detection mode.

Micro-SD USB Micro-SD USB

2S

1.How to Turn On the Camera/Record a Video

(2) Press and hold the button for 2 seconds whilerecording, the LED flashes red and blue alternately and then goes off, and the device will save the video in the microSD card and then turns off.

Micro-SD USB

2S

Micro-SD USB

2S

(1) Press and hold the button for 2 seconds to turn on the camera. The LED flashes blue 3 times and then goes off, the camera enters into recording mode.

12

Micro-SD USB

How to Use Your Conbrov T33 Camera

(1) Connect the camera to PC via the included USB cable. (2) Press and hold the button for 2 seconds, the LED flashes blue continuously, which means the camera enters into reading tray mode. The disk icon will appear on your computer, then open the removable disk.

4.How to Read Disk

13

2S

(2) Press and hold the button for 2 seconds, the LED flashes red and blue alternately and then goes off, and the device will save the video in the micro SD card and then turn off.

3.How to Switch into Night Vision Mode

During recording , ambient light brightness is lower than 10LUX, the camera will automatically switch into night vision and the video is black and white.

Micro-SD USB

2S

Micro-SD USB

Power supply

Infrared light angle

Battery type

Battery capacity

Video format

Video recording

Resolution

Lens angle

Infrared type

Technical Specifications

MicroSD card capacity

Night vision

PIR detection

Max daytime recording time

Max night vision continuously recording time

USB port

Day time recording power consumption

Night vision recordingpower consumption

PIR detection angle

Motion detection standby mode time

DC 5V

45°

Polymer lithium battery

1000 mAh

AVI

1080P/720P/VGA

Max 32GB

940

MJPEG

8 meters

5 meters

45°

6 hours

3 hours

1 year

130 mAh

330 mAh

Micro 5P

110°

14

Charging

Fully charged

Power off

Manual recording

Motion detection recording

Steady yellow

Yellow light goes off

Blue and red light flash and then goes off

Blue LED flashes 3 times and goes off

Blue light flashes once and goes off , then red light flashes 3 times and stays on

Motion detection standby mode

Steady red

LED Status

15

Read the disk Blue light flashes continuously

Power on without SD card

Reset

Low power

Blue light flashes 10 times and the camera turns off

The corresponding mode indicator light goes off and the camera turns off

Red one flashing 10 times and the camera turns off

1. Q: What should I do if the camera happens to malfunctions?A: Please reset the camera.

2.Q:What should I do if the disk can't be read?A.Check if the USB cable can't contact well or be damaged.B. Check the computer's USB port and connect with other USB port.C. Check the computer's internet speed and operating condition, and restart the computer.D.Unplug the USB cable and reset the camera, read the disk again.

3. Q: What if the video can not play or play without sound?A: Please play with other video player or restart the computer.

4. Q: What should I do if the SD card can not save video or the storage is 0KB?A: Please format the SD card or use another brand SD card. Kindly suggest using the SD card which is class 10 and larger than 16G.

5. Q: Why I can't see anything in the night vision video, but the sound is normal?A : You can check if the Infrared light is on when recording in night vision mode and reset the camera.

6. Q: Why the date of the camera can not be updated?A: Please check whether the SETTIME file save or not. Don't change the original format of the date.

7.Q: Why the camera turns off when the storage is full? Is it support loop recording?A: Check the option of overwrite setting in "SetCamera", please change it into " ON ".

FAQS

16

All products sold by the Conbrov Group are covered by a 12-month full replacement warranty.Happy with it? Share your experience with an Amazon review.Or any questions?Our friendly customer service team is ready to help: support@conbrov.comContacting us via the above email address,which is the quickest way to reach our support team.For the electronic user manual and more information, please visit:

Disposal

Electrical products should not be discarded with household waste. According to the European Directive 2012/19/EC on waste electrical and electronic equipment and its implementation into national law, electrical products used must be collected separately and disposed of at collection points provided for this purpose. Talk with your local authorities or dealer for advice on recycling.

Declaration of conformityConbrov Electron Co., Ltd., Room 908 Huiyicaifu Center, c/o Queshan and Longhua Roads, Shenzhen, China, declares under our sole responsibility that the product Starlight Mini Camera T19, to which this declaration relates, meets all relevant European standards and directives. For the complete declaration of conformity visit our website www.conbrov.com.

Warranty

17

23

TrademarksAll trademarks or registered trademarks are the property of their respective owners.

ManufacturerConbrov Electron Co., Ltd.Room 908 Huiyicaifu Center,c/o Queshan and Longhua RoadsShenzhen, People's Republic of China

About Us Conbrov Electron Co., Ltd. founded in 2003 is an innovative technology research company specialized in personal surveillance cameras and on-dash cameras. Conbrov products and technology are patent protected by PCT or U.S. Patent Office. Based on years of professional experience and knowledge, we are able to provide the best and most efficient products and customer service.