conductive and statmate colorsgrounding materials supplied with the order one 2" x 24 "...
TRANSCRIPT
www.commercial-solutions.netB.R. FUNSTEN & CO.WHOLESALE FLOORING PRODUCTS
TOM DUFFY COMPANYWHOLESALE FLOORING PRODUCTS
SEAMLESS INSTALLATION VPI offers 13 seam welding bead colors when seamless floors are required.
VPI can also provide 24” & 36” tile pre-grooved for easy seam welding on site.
Rose 905
Light Brown 904
Light Blue 909
Black 901
White 902
Rust 924
Sandstone 913
VINYL ESD
10 Black Ice 21 Rain Forest 09 Glacier 17 Platinum 52 Winter White 92 Patriot 53 Bone 16 Cloud 02 White 30 Eggplant 93 Storm
CONDUCTIVE AND STATMATE COLORS
Dark Brown 914
Off White 912
Jade 918
Gray 906
Light Gray 916
Dark Gray 915
PERFORMANCE PROPERTIES • ESD STATIC CONTROL TILECONDUCTILE FLOORING
Performance Properties
ESD Static Control Tile
CONDUCTIVE FLOORING
Technical Service: (800) 874-4240
GAUGE (thickness)
SIZE (in inches)
COMPOSITION
ANSI ESD S7.1 Resistance of Flooring Materials Conductile© used in conjunction with VPI adhesives very consistently meets S7.1 requirements. Result averages are summarized as follows:
Resistance (Ohms)Conductile & VPI 165 Adhesive, to Ground 2.1 X 105Conductile & VPI 165 Adhesive, Point to Point 3.5 X 105Conductile & VPI 150 Adhesive, to Ground 3.9 X 105Conductile & VPI 150 Adhesive, Point to Point 5.8 X 105
Data demonstrates that Conductile© used in conjunction with VPI adhesives very consistently meets S7.1 requirements for a conductive ESD flooring. (Test dataavailable upon request).
NFPA 99 Standard for Health Care FacilitiesNFPA 101 Life Safety CodeAATCC 134 Electrostatic PropensityANSI/UL 779 Electrically Conductive Floor CoveringASTM E84 Fire Resistance (Steiner Tunnel)FED STD 101C Static Decay, Method 4046 at 15% RHASTM E648 Critical Radiant Flux CRF (W/cm2)ASTM F150 Electrical Resistance
ASTM F925 Chemical Resistance
ASTM F970 Static Load
ASTM F1700 Solid Vinyl Floor Covering Materials
VPI 150 2 Part Epoxy Adhesive 0 VOC ContentAdhesive and Spread Rate Nominally 135 Sq.ft/gal but will vary due to application & substrate variables
VPI 165 1 Part Acrylic Adhesive 0 VOC ContentNominally 135 Sq.ft/gal but will vary due to application & substrate variables
Trowel Size Please refer to Installation & Maintenance Instructions
25 year wear / 75 year workmanship & materials
No wax required.
ESD Con Properties 16: 06-03-16
WARRANTY (See actual VPI WARRANTY for details)
MAINTENANCE (See Installation & Maintenance Instructions for details)
Electrical Performance Life Time Warranty
Grounding Materials Supplied with the Order One 2" x 24 " copper strip installed every 2,000 - 2,500 sq. ft.
Meets UL Standards< 12 Volts with conductive shoesPassesPasses
<.001" RI after 24hrs@ 250 psi (1.125" diameter foot) 2,500 psi @ .005" RI after 24 hrs (.05" diameter foot)
Excellent (Acids, Alkalis, Household, Chemicals)
Point to Point or Point to Ground 25,000 - 1,000,000 ohms>1.08 W/cm2 (NFPA 253 Class 1)
1/8" (3mm)
Homogeneous solid vinyl tile with encapsulated conductive elements distributedthroughout the structure.
Conforms
5000 - 0 Volts in < 0.01 Sec.<75 (Class II)
12" x 12"24" x 24" and 36" x 36"24" x 24" and 36" x 36" can be pre-grooved for seamless floor
3A - ESD CON Properties 16
VPI 150A two part epoxy adhesive specially engineered for use below grade (porous or non-porous) and /or with heavy load traffic or heavy static loads such as hospital beds. Depending on conditions and application, spread rate is nominally 135 square feet. RH requirements are a maximum of 85% and a PH of 6 - 9. See adhesive section for more details including substrate requirements and open times. Zero detectable VOC’s.
Performance Properties
ESD Static Control Tile
STATIC DISSIPATIVE FLOORING
Technical Service: (800) 874-4240
GAUGE (thickness)
SIZE (in inches)
COMPOSITION
ANSI ESD S7.1 Resistance of Flooring Materials Point to Point or Point to Ground 1,000,000 - 1,000,000,000 ohmsNFPA 99 Standard for Health Care Facilities
NFPA 101 Life Safety Code
AATCC 134 Electrostatic Propensity
ANSI/UL 779 Electrically Conductive Floor Covering
ASTM E84 Fire Resistance (Steiner Tunnel)
FED STD 101C Static Decay, Method 4046 at 15% RH
ASTM E648 Critical Radiant Flux CRF (W/cm2)
ASTM F150 Electrical Resistance
ASTM F925 Chemical Resistance
ASTM F970 Static Load
ASTM F-1700 Solid Vinyl Floor Covering Materials
VPI 150 2 Part Epoxy Adhesive 0 VOC ContentAdhesive and Spread Rate Nominally 135 Sq.ft/gal but will vary due to application & substrate variables
VPI 165 1 Part Acrylic Adhesive 0 VOC ContentNominally 135 Sq.ft/gal but will vary due to application & substrate variables
Trowel Size Please refer to Installation & Maintenance Instructions
25 year wear / 75 year workmanship & materials
No wax required.
ESD SD Properties 16: 06-03-16
1/8" (3mm)
Homogeneous solid vinyl tile with encapsulated conductive elements distributedthroughout the structure.
Conforms
5000 - 0 Volts in < 0.20 Sec.<75 (Class II)
12" x 12"24" x 24" and 36" x 36"24" x 24" and 36" x 36" can be pre-grooved for seamless floor
Meets UL Standards< 30 Volts with conductive shoesPassesPasses
<.001" RI after 24hrs@ 250 psi (1.125" diameter foot) 2,500 psi @ .005" RI after 24 hrs (.05" diameter foot)
Excellent (Acids, Alkalis, Household, Chemicals)
Point to Point or Point to Ground 1,000,000 - 1,000,000,000 ohms>1.08 W/cm2 (NFPA 253 Class 1)
WARRANTY (See actual VPI WARRANTY for details)
MAINTENANCE (See Installation & Maintenance Instructions for details)
Electrical Performance Life Time Warranty
Grounding Materials Supplied with the Order One 2" x 24 " copper strip installed every 2,000 - 2,500 sq. ft.
PERFORMANCE PROPERTIES • ESD STATIC CONTROL TILESTATMATE FLOORINGVPI 165A simple to use one part adhesive for use on or above grade. Can be used on porous or nonporous substrates in applications with light to medium traffic. Depending on conditions and application, spread rate is nominally 135 square feet. RH requirements are a maximum of 85% and a PH of 7 - 11. See adhesive section for more details including substrat requirements and open times. Zero detectable VOC’s.
All items available in: 12” x 12” • 24” x 24” • 36” x 36” sizes
www.commercial-solutions.netB.R. FUNSTEN & CO.WHOLESALE FLOORING PRODUCTS
TOM DUFFY COMPANYWHOLESALE FLOORING PRODUCTS
CUSTOM ESD
• Unique 18” x 36” and 18” x 18” formats, plus the standard sizes: 12’s, 24’s and 36’s
• 20+ colors versus the “standard” various shades of white and gray
• Any PRT color including vibrant red , yellow, blue, green, etc. can be supplied
• VPI can also supply ANY custom color that matches a client’s color scheme
• Longer performance warranties than ANY other commercial floor making it not only functional and beautiful but bullet proof
• VPI ESD/PRT can be water jet cut resulting in incredibly intricate logos and designs
• Price points are extremely competitive with all “standard” forms of ESD flooring
• Standard lead time for a custom/PRT color is 5 weeks, at a 10,000 SF minimum
Advance Surgical Theater at Brigham and Women’s Hospital Harvard Medical School, Boston MA, recipient of the prestigious AIA National Healthcare Design Award for Innovations in Planning & Design Research
Payette Architectural Firm – Boston, MA • Kevin B. Sullivan, FAIA, President, CEOLeon W. Drachman, AIA, Project Principal • Milly Baker, AIA, ACHA, LEED AP, Project Manager/Architect