conductive/shielding adhesive tapes › english › products › catalog... · 2014-04-22 · flame...
TRANSCRIPT
Conductive/ShieldingAdhesive Tapest e r a o k a t a p e
Total technology of trust corresponding to needs in age.
▲ CONDUCTING
▲ SHIELD
▲ ADHESIVE TAPE
Agent
'14.4,2000
Foreign BusinessDepartment Tokyo Branch
Osaka Branch
Nagoya Branch
Sendai Branch
Seoul Branch
TaipeiRepresentative Office
1-4-22, Hiromachi, Shinagawa-ku, Tokyo,Japan TEL:81-3-3491-1393Shin Osaki Kangyo Building 1-6-4, Osaki, Shinagawa-ku,Tokyo,JapanTEL:81-3-3779-9211 4-9-6, Sugahara, Higashi-Yodogawa-ku, Osaka,JapanTEL:81-6-6329-45551-20, Nagaki-cho, Kita-ku, Nagoya,JapanTEL:81-52-912-1123Yakata Building 3-2-7, Shintera, Wakabayashi-ku, Sendai,JapanTEL:81-22-256-1891249 Bundang Trapalace., 234, Hwangsaeul-ro, Bundang-gu, Seongnam-si, Gyeonggi-do koreaTEL:82-31-714-7373Room602, No. 289, Song Jiang Rd., Zhong shan District., Taipei104, ROCTEL:886-2-2503-1910
TERAOKA SEISAKUSHO (HONG KONG) CO., LTD.
TERAOKA SEISAKUSHO (SHANGHAI) CO., LTD.
TERAOKA SEISAKUSHO (SHENZHEN) CO., LTD.
Room 1708, Ever Gain Plaza Tower 2, No. 88, Container Port Rd.,Kwai Chung,N. T., Hong KongTEL:852-2369-9313 Site G, 2nd Floor, No. 185, Taigu Rd., Waigaoqiao Free Trade Zone, hanghai, People’s Republic of ChinaTEL:86-21-5868- 2951 Unit A,1st Floor,Building №2,Jiuhuakejiyuan,Xibu Industrial Zone, Xixiang Rd., Baoan District,Shenzhen,People’s Republic of ChinaTEL:86-755-2970-6500
Head OfficeFactories
1-4-22, Hiromachi, Shinagawa-ku, Tokyo,Japan Kannnami, Sano, Ibaraki, Indonesia
Why Not Achieve Ultimate Efficiency and Enhanced Productivity Using TERAOKA's Versatile Products and State-of-the-Art Technology?
Shielding for Connector CableShielding for Switching TransformerSelect the type that suits your requirements most from the following types:Type that uses an adhesive which achieves a high vertical electric conductivity just by adhering it. Type that uses a metal foil excellent in reliability. Cloth type that is light in weight and excels in flexibility. Flame retardant type(approved by UL 510 Flame retardant). Has safety Double-coated adhesive type.
■ Tape ListSingle side coated conductiveadhesive tapes
Double-coated conductiveadhesive tapes
Conductive cloth adhesive tape
Copper foil conductive adhesive tape
Aluminum foil conductive adhesive tape
Continuing to respond to the needs of the times. This is the mission pursued by TERAOKA.Conductive and shielding tapes protect information equipment of the IT age from static electricity and electromagnetic wave disturbance.The countermeasure against static electricity and electromagnetic wave disturbance in a limited space is increasingly needed due to the downsizing and functional diversification of digital devices. The versatile lineup of TERAOKA's products can respond to these needs.
An adhesive tape supports theevolution of digital devices.
Copper foil
Aluminum foir
Baseless
Non-woven fabric
No.792 No.795 No.796
No.791
No.7025
No.7741
No.1825 No.1829
No.8313 No.8315 No.8323
No.8303 No.8304
1 2
Flame retardant conductive cloth adhesive tape
Release linerConductive adhesiveCopper or aluminum foil
Frequency(MHz)
No.1825
No.1829
No.1825
No.1829
■Shielding for cables, connectors,etc■Auxiliary materials for shielded rooms■EMI/RFI shielding■Static charge draining,grouding
No.1825
Low VOC Halogen free flame retardantconductive cloth adhesive tape No.1829
Copper foil conductiveadhesive tapesAluminum foil conductive adhesive tape
No.8313 No.8315 No.8323
No.8303 No.8304
No.1825Nickel/copperPolyester/ripstop
0.1202011.02650.03
No.1829Nickel/copperPolyester/ripstop
0.0952011.81950.01
Features
General Characteristics General Characteristics
○ELECTRIC FIELD WAVES(KEC method)
○MAGNETIC FIELD WAVES(KEC method)
Shielding Characteristics○ELECTRIC FIELD WAVES(KEC method)
○MAGNETIC FIELD WAVES(KEC method)
Shielding Characteristics
Uses
Metallic woven fabric coating
Acrylic adhesive conductiveRelease liner
Structure
■Excellent shielding performance■Extermely flexible-can be fitted closely to projections and indentations■Superior mechanical strength■Able to withstand bending-endured over 10,000 flexes without damage in JIS P8115 breakage test (tensile force:9.8N), compared with 14 times for electrolytic copper foil and 20 times for rolled copper foil■Low resistance electrical conductivity only apply■Light and easy to work with■UL510 flame retardant (file №E56086)■No.1829 is a halogen and antimony free flame retardant agent No.1829 is a low VOC product (Toluene xylene free adhesive)
■EMI/RFI shielding■Shielding for cables, connectors,etc■Static charge draining, grounding■Shielding for housing■Attachment, fixing, temporary positioning of parts■Fixing of electrodes, etc.
Features Uses
Structure
■Excellent depthwise and lengthwise conductivity possible simply by applying tape■Those 5 tapes are Flame retardant. No.8323 8303:UL510 flame retardant (file No.E56086)■No.8313 is a low VOC product (Toluene xylene free adhesive)
12011010090807060504030201000.1 0.2 0.5 1 2 5 10 20 50 100 200 500 1.0G
12011010090807060504030201000.1 0.2 0.5 1 2 5 10 20 50 100 200 500 1.0G
No.8303
No.8323
12011010090807060504030201000.1 0.2 0.5 1 2 5 10 20 50 100 200 500 1.0G
No.8303
No.8323
12011010090807060504030201000.1 0.2 0.5 1 2 5 10 20 50 100 200 500 1.0G
Shieldingeffectiveness(dB)
Shieldingeffectiveness(dB)
ItemCoated metal
Fabric/weave method
Tape thickness mm
Standard length m
Peel adhesion N/W.25mm
Tensile strength N/W.25mm
Electrical resistance Ω/cm2
ItemBackingBacking thickness mmTape thickness mmStandard length mPeel adhesion N/W.25mmTensile strength N/W.25mmElectrical resistance Ω/cm2
Shieldingeffectiveness(dB)
Shieldingeffectiveness(dB)
Frequency(MHz)
The above figures were measured using JIS tests or our own testing method and are not guaranteed values.
Frequency(MHz)
The above figures were measured using JIS tests or our own testing method and are not guaranteed values.Frequency(MHz)
№8313Electrolytic copper foil
0.0090.0302013.5114.30.02
№8315Electrolytic copper foil
0.0180.0502014.8197.50.02
No.8323Rolled copper foil
0.0350.070208.5898.10.04
No.8303Aluminum foil0.0500.085209.8180.90.08
No.8304Aluminum foil0.0200.0502012.729.40.06
3 4
CONDUCTING/SHIELD/ADHESIVE TAPE CONDUCTING/SHIELD/ADHESIVE TAPE
Release linerConductive adhesiveCopper or aluminum foilConductive adhesive
No.792 No.795 No.796
No.791
Conductive baselessadhesive tape No.7025
No.7741
Structure
Copper foil double-coated conductiveadhesive tapes
■Stratic charge draining,grouding■To fix static eliminators■Attachment,fixing,temporary positioning of parts■For thermal conduction
Aluminum foil double-coated conductiveadhesive tape
UsesFeatures■Excellent depthwise and lengthwise conductivity possible simply by applying tape■Thermal conductivity only apply■No.795、No.796 have tape roll up by release liner inside and out side adhesive form.■No.796 is a low VOC product (Toluene xylene free adhesive)
○MAGNETIC FIELD WAVES(KEC method)
○ELECTRIC FIELD WAVES(KEC method)
Shielding Characteristics
General Characteristics
No.791Aluminum foil
0.0200.13020/5014.74410.50≧5.0
No.792Rolled copper foil
0.0350.09020/508.584900.02≧5.0
No.795Electrolytic copper foil
0.0180.060307.50ー0.05≧5.0
No.796Electrolytic copper foil
0.0090.050207.50ー0.03≧5.0
ItemBacking
Backing thickness mm
Tape thickness mm
Standard length m
Peel adhesion N/W.25mm
Shear adhesive strength N/4cm2
Electrical resistance Ω/cm2
Thermal conductivity W/m・K
12011010090807060504030201000.1 0.2 0.5 1 2 5 10 20 50 100 200 500 1.0G Frequency(MHz)
No.795
No.796
Shieldingeffectiveness(dB)
12011010090807060504030201000.1 0.2 0.5 1 2 5 10 20 50 100 200 500 1.0G Frequency(MHz)
No.795
No.796
Shieldingeffectiveness(dB)
Release liner
Acrylic-based conductive
No.7025
Non-backing
0.035
20
12.5
0.01
Ammeter
Voltmeter
Electrode
Backing
Conductive adhesive
Electrode
Structure Structure
Features■thin and light. (for baseless) ■Excellent depthwise conductivity possible simply by applying tape
Electrical Resistance Measurement Method (Equivalent to MIL Standard 202C Method 303)A load of 3.43N per 1cm2 is applied to the electrode, and electrical resistance under a 0.1ampere current calculated using R=V/I.
Shielding Characteristic Measurement Method (KEC Method)Where E0 represents electric field strength (or H0 : magnetic field strength) in a space withoutshielding, and where Ex represents electric field strength (or Hx : magnetic field strength) in aspace with shielding, the shielding effectiveness is calculated as follows:
Features■Flexible conductive non- woven fabric backing for using in sharp bending part. ■Extermely flexible-can be fitted closely to projections and indentations.■Low VOC product (Toluene xylene free adhesive)
Uses■To fix static eliminators
Uses■EMI/RFI shielding■Fixing of FPC and bezel.
General Characteristics General Characteristics
No.7741
Non- woven fabric
0.050
20
10.6
0.02
Item
Backing
Tape thickness mm
Standard length m
Peel adhesion N/W.25mm
Electrical resistance Ω/cm2
Item
Backing
Tape thickness mm
Standard length m
Peel adhesion N/W.25mm
Tensile strength N/W.25mm
E0Ex[dB]SE(shielding effectiveness)= 20 log10 H0
Hx[dB]SE(shielding effectiveness)= 20 log10
ELECTRIC FIELD WAVES MAGNETIC FIELD WAVES
Signal generator
Strengthmeasurement device
Transmissionantenna
Receiveantenna
Specimen
Signal generator
Strengthmeasurement device
Receivecoil
Transmissioncoil
Specimen
The above figures were measured using JIS tests or our own testing method and are not guaranteed values.
Non- woven fabricdouble-coated conductiveadhesive tape
Acrylic-based conductiveNon- woven fabricAcrylic-based conductiveRelease liner
The above figures were measured using JIS tests or our own testing methods and are not guaranteed values.
The above figures were measured using JIS tests or our own testing methods and are not guaranteed values.
5 6
CONDUCTING/SHIELD/ADHESIVE TAPE CONDUCTING/SHIELD/ADHESIVE TAPE