conery mfg catalog
DESCRIPTION
Float Switches, Pump Rail Kits, Pump Base Elbows, FreeFlo pump base, high level alarms, sump pump switch, high water alarm, pump switch, liquid level controls, liftstation components, basin componentsTRANSCRIPT
freeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflofreeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflo
freeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflofreeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflo
freeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflofreeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflo
freeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflofreeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflo
freeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflofreeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflo
freeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflo freeflo
Engineered Quality Built for You.
Product Catalog Effective 09-2011
Distributed By:Aqua Technology Group
West Chester Ohio 45069Tel: 513-298-1183
Fax: 866-439-9570 [email protected]
www.aquatechnologygroup.com http://store.aquatechnologygroup.com
Dear Customers, After 32 years Conery Mfg, Inc. remains dedicated to providing
our customers with quality products coupled with excellent customer
service. We are committed to offering you the tools you need to
successfully accomplish your most challenging tasks. At Conery
Manufacturing we take pride in our ability to serve our customers’
most important needs. From our extensive product line and
engineered drawings to our trained staff, we are ready to provide
you with the hardware and information you need to make your
project a success. Sincerely,
Chris Shafer, Vice President
FREEFLO Base Elbow Rail SystemsBuilt to meet the engineered standards of municipal wastewater stations, freeflo elbows are designed to configure with nearly all submersible pumps in the market today. As the offering of freefloelbows has expanded, so has our experience with thousands of quality installations. Continual expansion, innovative design, and stocked product for immediate shipment – this has become our reputation and we look forward to building on these commitments throughout the years ahead.
About Conery Manufacturing, Inc.
CONERY Float SwitchesQuality and reliability are the hallmarks of our proven line of float switches. With 32 years of experience, our float switches are designed and manufactured in our Ashland, Ohio factory to meet your every need. Regardless of specification or application, Conery Mfg Inc is dedicated to providing the right float switch with knowledgeable customer service, unmatched production flexibility, and timely shipping.
2 Tel: 513-298-1183 • Fax: 866-439-9570 • Email: [email protected]
Conery Team
Carla HarrisOperations [email protected]
Justin CrooksSales [email protected]
Jeff steinerInside Sales / Customer [email protected]
3Download a variety of files from www.ConeryMFG.com
BERS-0125, BERS-0150, or BERS-0200 List Price: $525.00• DuctileIronConstruction• PowderCoatedforCorrosionResistance• CompactDesignforEasyInstallation• StainlessSteelAccessoriesStandard• GuideRailPinsDesignedtoAccept0.75”or1.00”Rails• RatedforPumpsWeighingLessthan200lbs• 2.00”Discharge
BERS-0125 CV, BERS-0150 CV, or BERS-0200 CV List Price: $680.00• IncludesIntegralCheckValveinPull-OutFlange• AllowsforRemovalofCheckValvewithPump• DuctileIronConstruction• PowderCoatedforCorrosionResistance• CompactDesignforEasyInstallation• StainlessSteelAccessoriesStandard• GuideRailPinsDesignedtoAccept0.75”or1.00”Rails• RatedforPumpsWeighingLessthan200lbs• 2.00”Discharge
BERS-0125 EX, BERS-0150 EX, or BERS-0200 EX List Price: $830.00• Non-SparkingDesign• BronzePull-OutFlange• BronzeLowerGuideRailPlate• DuctileIronConstruction• PowderCoatedforCorrosionResistance• CompactDesignforEasyInstallation• StainlessSteelAccessoriesStandard• GuideRailPinsDesignedtoAccept0.75”or1.00”Rails• RatedforPumpsWeighingLessthan200lbs• 2.00”Discharge
Base Elbow Rail Systems1.25”, 1.50” & 2.00”
The freeflo Base Elbow Rail System is designed for the simple installation and removal of most vertical discharge pumps. Its innovative design allows for pump service without the need to disconnect plumbing or physically enter the basin. Flanges available separately, if necessary.
Visit our webpage at www.conerymfg.com/pumps for technical data & charts regarding pump compatibility with our base elbows.
4 Tel: 513-298-1183 • Fax: 866-439-9570 • Email: [email protected]
EZR System Replacement Flanges and Accessories
Designed to work with existing systems, the flanges and accessories allow for replacement of worn parts without requiring the removal of the Base Elbow itself. Eliminating the need to enter the basin or replumb the entire station.
EZR Pull-Out Flanges
EZR Specialty Pump Adapter (SGV)
EZR Pull-Out Flanges with Check Valve
EZR Pump AdapterFlanges
EZR Pull-Out Flanges Non-Sparking Design
EZR Replacement Lower Guide Plates
EZR PULL-OUT FLANGES Item Description List PriceEZR-POF-0125 1.25”ReplacementPull-OutFlange...............................................................................................................................................$315.00EZR-POF-0125SGV 1.25”ReplacementPull-OutFlangeforSVGGrinderPumps...............................................................................................................315.00EZR-POF-0125CV 1.25”ReplacementCheckValvePull-OutFlange................................................................................................................................495.00EZR-POF-0125CVSGV 1.25”ReplacementCheckValvePull-OutFlangeforSVGGrinderPumps............................................................................................495.00EZR-POF-0150 1.50”ReplacementPull-OutFlange...................................................................................................................................................315.00EZR-POF-0150CV 1.50”ReplacementCheckValvePull-OutFlange................................................................................................................................495.00EZR-POF-0200 2.00”ReplacementPull-OutFlange...................................................................................................................................................315.00EZR-POF-0200CV 2.00”ReplacementCheckValvePull-OutFlange................................................................................................................................495.00EZR-POF-0300H 3.00”HorizontalReplacementPull-OutFlange..................................................................................................................................545.00
EZR PUMP ADAPTER FLANGESEZR-PAF-0125 1.25”PumpAdapter........................................................................................................................................................................120.00EZR-PAF-0150 1.50”PumpAdapter........................................................................................................................................................................120.00EZR-PAF-0200 2.00”PumpAdapter........................................................................................................................................................................120.00
ADDITIONAL ACCESSORIESEZR-LGRP SSLowerGuideRailPlatefor1.25”-3.00”Systems........................................................................................................................120.00
5Download a variety of files from www.ConeryMFG.com
BERS-0300 V, BERS-0320 V List Price: $1,015.00•DesignedforVerticalDischargePumps•DuctileIronConstruction•PowderCoatedforCorrosionResistance•CompactDesignforEasyInstallation•GuideRailPinsDesignedtoAccept0.75”,1.00”,or1.25”Rails•RatedforPumpsWeighingLessthan400lbs•3.00”Discharge•BERS-0320V=3.00”x2.00”PumpAdapterFlange
BERS-0300 H, BERS-0325 H List Price: $1,015.00•DesignedforHorizontalDischargePumps•DuctileIronConstruction•PowderCoatedforCorrosionResistance•CompactDesignforEasyInstallation•GuideRailPinsDesignedtoAccept0.75”,1.00”,or1.25”Rails•RatedforPumpsWeighingLessthan400lbs•3.00”Discharge•BERS-0325H=3.00”x2.50”Pull-OutFlange
BERS-0300 HEX, BERS-0325 HEX List Price: $1,787.00•Non-SparkingDesign•BronzeLowerGuideRailPlate•DesignedforHorizontalDischargePumps•DuctileIronConstruction•PowderCoatedforCorrosionResistance•CompactDesignforEasyInstallation•GuideRailPinsDesignedtoAccept0.75”,1.00”,or1.25”Rails•RatedforPumpsWeighingLessthan400lbs•3.00”Discharge•BERS-0325HEX=3.00”x2.50”Non-SparkingPull-OutFlange
3.00” Base Elbow Rail Systems
The BERS-0300 Base Elbow Rail System is designed for the simple installation and removal of most 3.00” vertical or horizontal discharge pumps. Its innovative design allows for pump service without the need to disconnect plumbing or physically enter the basin. In either style, its compact design allows for a greater availability in the basin.
Visit our webpage at www.conerymfg.com/pumps for technical data & charts regarding pump compatibility with our base elbows. Freeflo base elbows not recommended for use with submersible turbine pumps and submersible well pumps.
6 Tel: 513-298-1183 • Fax: 866-439-9570 • Email: [email protected]
Replacement Flanges and Accessories
Item Description List PricePOF-0125 Pull-OutFlangeFor1.25”Elbow....................................................................................................................................................$248.00POF-0125CV Pull-OutFlangeFor1.25”CheckValveElbow....................................................................................................................................428.00POF-0125EX Pull-OutFlangeFor1.25”Bronze(Ns)Elbow....................................................................................................................................445.00POF-0150 Pull-OutFlangeFor1.50”Elbow.......................................................................................................................................................248.00POF-0150CV Pull-OutFlangeFor1.50”CheckValveElbow....................................................................................................................................428.00POF-0150EX Pull-OutFlangeFor1.50”BronzeNon-SparkingElbow......................................................................................................................445.00POF-0200 Pull-OutFlangeFor2.00”Elbow.......................................................................................................................................................248.00POF-0200CV Pull-OutFlangeFor2.00”CheckValveElbow....................................................................................................................................428.00POF-0200EX Pull-OutFLangeFor2.00”BronzeNon-SparkingElbow.....................................................................................................................445.00POF-0300H Pull-OutFlangeFor3.00”HorizontalElbow.......................................................................................................................................465.00POF-0300HEX Pull-OutFlangeFor3.00”BronzeNon-SparkingHorizontalElbow...................................................................................................1,070.00POF-0325H Pull-OutFlangeFor3.00”X2.50”HorizontalElbow..........................................................................................................................465.00POF-0325HEX Pull-OutFlangeFor3.00”X2.50”Non-SparkingHorizontalElbow.................................................................................................1,070.00POF-0300V Pull-OutFlangeFor3.00”VerticalElbow...........................................................................................................................................420.00POF-0300VEX-BP Pull-OutFlangeFor3.00”Non-SparkingVerticalElbow......................................................................................................................625.00POF-0320V Pull-OutFlangeFor3.00”X2.00”VerticalElbow..............................................................................................................................420.00POF-0300VEX-BP Pull-OutFlangeFor3.00”X2.00”Non-SparkingVerticalElbow.........................................................................................................625.00
PAF-0125 1.25”SSPumpAdapterFlange...........................................................................................................................................................96.00PAF-0150 1.50”SSPumpAdapterFlange.........................................................................................................................................................101.00PAF-0200 2.00”SSPumpAdapterFlange.........................................................................................................................................................107.00PAF-0300 3.00”SSPumpAdapterFlange.........................................................................................................................................................150.00PAF-0320 3.00”X2.00”SSPumpAdapterFlange............................................................................................................................................150.00
UGB-StNLS SSUpperGuideBracketForRailSizes0.75”,1.00”,1.25”................................................................................................................178.00UGB-PC PowderCoatedSteelUpperGuideBracket...........................................................................................................................................69.00IGB-0075 SSIntermediateGuideBracketFor0.75”Rail....................................................................................................................................229.00IGB-0100 SSIntermediateGuideBracketFor1.00”Rail....................................................................................................................................229.00IGB-0125 SSIntermediateGuideBracketFor1.25”Rail....................................................................................................................................229.00LGRP-0200 SSLowerGuidePlateForElbows1.25”-2.00”Discharge....................................................................................................................110.00LGRP-0300 SSLowerGuidePlateForElbows3.00”Discharge..............................................................................................................................110.00
O-Ring-0200 O-RingSetFor1.25”-2.00”Elbows.....................................................................................................................................................14.00O-Ring-0300 O-RingSetFor3.00”VerticalElbows...................................................................................................................................................17.00
POk-0300 Hardware&GasketkitFor3.00”HorizontalElbows............................................................................................................................90.00POk-0325 Hardware&GasketkitFor3.25”HorizontalElbows............................................................................................................................90.00
HPGSpacer OptionalSpacerkitForHPGGrinderPumps........................................................................................................................................38.00SGVAdapter OptionalMountingkitForSGVGrinderPumps.....................................................................................................................................28.00
Pull-Out Flanges
Pull-Out Flanges
Pump Adapter Flanges
O-Ring Sets
Upper Guide Rail Bracket
Pull-Out Kits
Intermediate Guide Rail Bracket
Adapters
SGVHPG
7Download a variety of files from www.ConeryMFG.com
The BERS-0400, BERS-0600 and BERS-0800 Base Elbow Rail System is designed for engineered pump stations with flanged discharges and pull-outs to accommodate larger pumps. Its innovative design allows for pump service without the need to disconnect plumbing and is adaptable for several different sealing options. In addition to standard base elbow rail systems, pull-out flanges for base elbows can be modified to accommodate unique pump bolt patterns. Please call for pricing & information.
BERS-0400, BERS-0430 List Price: $1,350.00•Ductileironconstruction•Powdercoatedforcorrosionresistance•Guiderailpinsdesignedtoaccept1.50”or2.00”rails•Metal-to-Metaldesignwithstainlesssteelbreakawayring•Heavydutyrubbergasketavailable(alternateseal)•Ratedforpumpsweighinglessthan2,000lbs•4.00”flangeddischarge•BERS-0430=4.00”x3.00”Pull-OutFlange
BERS-0400 HEX, BERS-0430 HEX List Price: $1,950.00•Non-SparkingDesign
BERS-0600, BERS-0640 List Price: $1,615.00•Ductileironconstruction•Powdercoatedforcorrosionresistance•Guiderailpinsdesignedtoaccept2.00”rails•Metal-to-Metaldesignwithstainlesssteelbreakawayring•Heavydutyrubbergasketavailable(alternateseal)•Ratedforpumpsweighinglessthan2,000lbs•6.00”flangeddischarge•BERS-0640=6.00”x4.00”Pull-OutFlangeBERS-0600 HEX, BERS-0640 HEXList Price: $2,660.00•Non-SparkingDesign
BERS-0800, BERS-0860 List Price: $2,450•Ductileironconstruction•Powdercoatedforcorrosionresistance•Guiderailpinsdesignedtoaccept2.00”or3.00”rails•Metal-to-Metaldesignwithstainlesssteelbreakawayring•Ratedforpumpsweighinglessthan4,000lbs•8.00”flangeddischarge•BERS-0860=8.00”x6.00”Pull-OutFlange
4.00”, 6.00” and 8.00” Base Elbow Rail Systems
Visit our webpage at www.conerymfg.com/pumps for technical data & charts regarding pump compatibility with our base elbows. Freeflo base elbows not recommended for use with submersible turbine pumps and submersible well pumps.
8 Tel: 513-298-1183 • Fax: 866-439-9570 • Email: [email protected]
Item Description List PricePOF-0400 Pull-OutFlangeFor4.00”Elbow....................................................................................................................................................$605.00POF-0430 Pull-OutFlangeFor4.00”X3.00”Elbow..........................................................................................................................................605.00POF-0400HEX Pull-OutFlangeFor4.00”Non-SparkingElbow..................................................................................................................................956.00POF-0430HEX Pull-OutFlangeFor4.00”X3.00”Non-SparkingElbow.....................................................................................................................956.00POF-0600 Pull-OutFlangeFor6.00”Elbow.......................................................................................................................................................750.00POF-0640 Pull-OutFlangeFor6.00”X4.00”Elbow..........................................................................................................................................750.00POF-0600HEX Pull-OutFlangeFor6.00”Non-SparkingElbow...............................................................................................................................1,290.00POF-0640HEX Pull-OutFlangeFor6.00”X4.00”Non-SparkingElbow..................................................................................................................1,290.00POF-0800 Pull-OutFlangeFor8.00”Elbow....................................................................................................................................................1,160.00POF-0860 Pull-OutFlangeFor8.00”X6.00”Elbow.......................................................................................................................................1,160.00
UGB-0150 SSUpperGuideBracketFor1.50”Rail..............................................................................................................................................211.00UGB-0200 SSUpperGuideBracketFor2.00”Rail..............................................................................................................................................211.00UGB-0300 SSUpperGuideBracketFor3.00”Rail..............................................................................................................................................307.00UGB-0150/0200REPkIt ReplacementHardwareForUGB-0150/UGB-0200.....................................................................................................................44.00/46.00
IGB-0200-4” SSIntermediateGuideBracketFor4.00”Discharge...........................................................................................................................272.00IGB-0200-6” SSIntermediateGuideBracketFor6.00”Discharge...........................................................................................................................272.00IGB-0200-8” SSIntermediateGuideBracketFor8.00”Discharge...........................................................................................................................272.00
POk-0400 Hardware&GasketkitFor4.00”Elbows..........................................................................................................................................125.00POk-0600 Hardware&GasketkitFor6.00”Elbows..........................................................................................................................................130.00
FG-0400FullGasketFor4.00”ElbOw...............................................................................................................................................................20.00FG-0600FullGasketFor6.00”Elbow................................................................................................................................................................22.00SR-0400StainlessSealingRingFor4.00”Elbow................................................................................................................................................46.00SR-0600StainlessSealingRingFor6.00”Elbow................................................................................................................................................60.00
Pull-Out Flanges
Full Gaskets
Pull-Out Flanges
SS Sealing Rings
Pull-Out Flanges
Pull-Out Kits
Upper GuideRail Bracket
Intermediate GuideRail Bracket
Replacement Flanges andAccessories
9Download a variety of files from www.ConeryMFG.com
Control Duty Mercury Float Switch Narrow Angle
Designed for accurate liquid level control in many applications including sewage and wastewater environments. This float switch can be utilized to signify specific water levels or for direct alarm activation. The durable construction provides for leak-proof operation and tremendous impact resistance.
Operating OptionsNormally Open (N/O) - Yellow Bulb... For pump down applications The mercury switch activates (contacts close) as the float rises 1.00” or 5 degrees above horizontal.
Normally Closed (N/C) - Red Bulb... For pump up applications The mercury switch de-activates (contacts open) as the float rises 1.00” or 5 degrees above horizontal.
Single Pole, Double Throw (SPDT) - Blue Bulb... Normally Open or Normally Closed A variation on the standard normally open or normally closed float switch, this float may be wired at installation to perform either operation but not both.
Specifications - Float & CableB1 Bulb (Std) Style Is 3.50” X 5.00”B2 Bulb (Mini) Style Is 3.00” X 3.75” Durable Polypropylene Shell Solid Polyurethane Foam Filling1.52g Mercury Tilt SwitchOperating Temperature Of 32-170 F Chlorinated Polyethylene Cable SJOOW-300 Volt - 18/2 CableSJOOW-300 Volt - 18/3 Cable For SPDT Design
Mounting OptionsC1 - Zinc Plated, Cast-Iron Cord Weight (1.22 Lbs)C3 - SS Clamp For Pipe Mount C4 - Releasable Poly Tie Strap C7 - Float Collar For 1.00” Pipe Mount
Specifications - ElectricalRated For 10 Amps @ 120 VACRated For 3 Amps @ 240 VAC Usable With 12-24 VDC Applications Not For Use With 460 Volt Applications
Available For Use With Instrinsically SafeCircuits When Used With Proper Relays.
B1 and B2Pear Shaped Bulb Standard and Mini
Available for 24 hour Shipment in all Cable Lengths
C1 C3 C4 C7
R
10 Tel: 513-298-1183 • Fax: 866-439-9570 • Email: [email protected]
Control Duty Non-Mercury Float Switch Narrow Angle
Designed for accurate liquid level control in nearly any application, including potable water, industrial, sewage and wastewater environments. This float switch can be utilized to signify specific water levels or for direct alarm activation. The durable outer shell and foam filled interior provide for leak-proof operation and tremendous impact resistance.
Operating OptionsNormally Open (N/O) - Green Bulb... For pump down applications The mechanical switch activates (contacts close) as the float rises 1.00” or 5 degrees above horizontal.
Normally Closed (N/C) - Green/Red Bulb... For pump up applications The mechanical switch de-activates (contacts open) as the float rises 1.00” or 5 degrees above horizontal.
Single Pole, Double Throw (SPDT) - Green/Blue Bulb... Normally Open or Normally Closed A variation on the standard normally open or normally closed float switch, this float may be wired at installation to perform either operation but not both.
Specifications - Float & CableB8 Bulb Style Is 3.50” X 5.00”Durable Polypropylene Shell Solid Polyurethane Foam Filling Mechanically Activated Micro-Switch Non - Mercury Design Operating Temperature Of 32-170 F Chlorinated Polyethylene Cable SJOOW-300 Volt - 18/2 Cable SJOOW-300 Volt - 18/3 Cable For SPDT Design
Mounting OptionsC1 - Zinc Plated, Cast-Iron Cord Weight (1.22 Lbs) C3 - SS Clamp For Pipe Mount C4 - Releasable Poly Tie Strap C7 - Float Collar For 1.00” Pipe Mount
Specifications - ElectricalSpecifications - Electrical Rated For 10 Amps @ 120 VAC Rated For 3 Amps @ 240 VAC Not For Use With 460 Volt Applications
B8Pear Shaped Bulb
Newest Mechanical Design NOW in Standard Bulb
Available for 48 Hour Ship-ment in all Cable Lengths
C1 C3 C4 C7
R
MERCURY
11Download a variety of files from www.ConeryMFG.com
Control Duty Mercury Float Switch Narrow Angle
Designed for accurate liquid level control in many applications including sewage and wastewater environments. This float switch can be utilized to signify specific water levels or for direct alarm activation. The durable construction provides for leak-proof operation and tremendous impact resistance.
Operating Options
Normally Open (N/O) - Black Bulb... For pump down applications The mercury switch activates (contacts close) as the float rises 1.00” or 5 degrees above horizontal.
Single Pole, Double Throw (SPDT) - Black Bulb... Normally Open or Normally Closed A variation on the standard normally open or normally closed float switch, this float may be wired at installation to perform either operation but not both.
Specifications - Float & CableB4 Bulb Style Is 4.25” X 6.00”B5 Bulb Style Is 4.25” X 6.00”Durable Polypropylene Shell Solid Polyurethane Foam Filling (B4 Style)1.52g Mercury Tilt Switch Operating Temperature Of 32-170 F Chlorinated Polyethylene Cable SJOOW-300 Volt - 18/2 Cable SJOOW-300 Volt - 18/3 Cable For SPDT Design
Mounting OptionsWMB-0100... Separate Item Listed In Brackets Custom Bracket Designed Specifically For Use With Dura-Floats Allows For Additional Mounting Options Including Float Poles.
Specifications - ElectricalRated For 10 Amps @ 120 VAC Rated For 3 Amps @ 240 VAC Usable With 12-24 VDC Applications Not For Use With 460 Volt Applications
Available For Use With Instrinsically Safe Circuits When Used With Proper Relays.
B4 and B5Dura-Float Design Internally Weighted
Heavy-Duty Construction for the Toughest Application
B4 - Foam Filled B5 - Air Filled
R
12 Tel: 513-298-1183 • Fax: 866-439-9570 • Email: [email protected]
Control Duty Non-Mercury Float Switch Narrow Angle
Designed for accurate liquid level control in nearly any application, including potable water, industrial, sewage and wastewater environments. This float switch can be utilized to signify specific water levels or for direct alarm activation. The durable outer shell and foam filled interior provide for leak-proof operation and tremendous impact resistance.
Operating Options
Normally Open (N/O) - Black Bulb... For pump down applications The mechanical switch activates (contacts close) as the float rises 1.00” or 5 degrees above horizontal.
Single Pole, Double Throw (SPDT) - Black Bulb... Normally Open or Normally Closed A variation on the standard normally open or normally closed float switch, this float may be wired at installation to perform either operation but not both.
Specifications - Float & CableB6 Bulb Style Is 4.25” X 6.00”B7 Bulb Style Is 4.25” X 6.00”Durable Polypropylene Shell Solid Polyurethane Foam Filling (B6 Style) Mechanically Activated Mirco-Switch Non-Mercury Design Operating Temperature Of 32-170 F Chlorinated Polyethylene Cable SJOOW-300 Volt - 18/2 Cable SJOOW-300 Volt - 18/3 Cable For SPDT Design
Mounting OptionsWMB-0100... Separate Item Listed In Brackets Custom Bracket Designed Specifically For Use With Dura-Floats Allows For Additional Mounting Options Including Float Poles.
Specifications - ElectricalRated For 10 Amps @ 120 VAC Rated For 3 Amps @ 240 VAC Not For Use With 460 Volt Applications
B6 and B7Dura-Float Design Internally Weighted
Heavy-Duty Construction for the Toughest Application
B6 - Foam Filled B7 - Air Filled
MERCURY
R
13Download a variety of files from www.ConeryMFG.com
Specifications - ElectricalRated For 13 Amps @ 120 VAC, ½ HP Rated For 13 Amps @ 240 VAC, 1HP Not For Use With 460 Volt Applications
Pump Duty Mercury Float Switch Wide Angle
Designed for accurate liquid level control in many applications including sewage and wastewater environments. Designed to handle direct pump control for sump pumps and other sewage ejectors with piggyback plug option available. Additionally, this float switch can be utilized to signify specific water levels or for direct alarm activation. The durable construction provides for leak-proof operation and tremendous impact resistance.
Operating OptionsNormally Open (N/O) - Yellow Bulb... For pump down applicationsThe mercury switch contacts are open (or off) in the hanging position. As the float rises 45 degrees above horizontal, the contacts close and actuate the switch. The contacts then remain closed until the float switch returns to 45 degrees below horizontal.
Normally Closed (N/C) - Red Bulb... For pump up applicationsThe mercury switch contacts are closed (or on) in the hanging position. As the float rises 45 degrees above horizontal, the contacts close and actuate the switch. The contacts then remain open until the float switch returns to 45 degrees below horizontal.
Single Pole, Double Throw (SPDT) - Blue Bulb... Normally Open or Normally ClosedA variation on the standard normally open or normally closed float switch, this float may be wired at installation to perform either operation but not both.
Specifications - Float & CableB1 Bulb (Std) Style Is 3.50” X 5.00”B2 Bulb (Mini) Style Is 3.00” X 3.75” Durable Polypropylene Shell Solid Polyurethane Foam Filling Wide Angle Mercury Tilt Switch Operating Temperature Of 32-170 F Chlorinated Polyethylene Cable SJOOW-300 Volt - 16/2 CableSJOOW-300 Volt - 16/3 Cable For SPDT Design
Mounting OptionsC1 - Zinc Plated, Cast-Iron Cord Weight (1.22 Lbs)C3 - SS Clamp For Pipe Mount C4 - Releasable Poly Tie Strap C7 - Float Collar For 1.00” Pipe Mount
Piggyback Plug OptionsP1 - 120 Volt Piggyback Plug P2 - 230 Volt Piggyback Plug
B1 and B2Pear Shaped Bulb Standard and Mini
Proven Design In Use for over 30 Years!
Available for 24 Hour Shipment in all Cable Lengths
P1
P2
C1 C3 C4 C7
R
14 Tel: 513-298-1183 • Fax: 866-439-9570 • Email: [email protected]
Specifications - ElectricalRated For 13 Amps @ 120 VAC, ½ HP Rated For 13 Amps @ 230 VAC, 1HP Not For Use With 460 Volt Applications
Pump Duty Non-Mercury Float Switch Wide Angle
Designed for accurate liquid level control in many applications including sewage and wastewater environments. Designed to handle direct pump control for sump pumps and other sewage ejectors with piggyback plug option available. Additionally, this float switch can be utilized to signify specific water levels or for direct alarm activation. The durable construction provides for leak-proof operation and tremendous impact resistance.
Operating OptionsNormally Open (N/O) - Green Bulb... For pump down applicationsThe mechanical switch contacts are open (or off) in the hanging position. As the float rises 45 degrees above horizontal, the con-tacts close and actuate the switch. The contacts then remain closed until the float switch returns to 45 degrees below horizontal.
Normally Closed (N/C) - Green/Red Bulb... For pump up applicationsThe mechanical switch contacts are closed (or on) in the hanging position. As the float rises 45 degrees above horizontal, the contacts open and actuate the switch. The contacts then remain open until the float switch returns to 45 degrees below horizontal.
Single Pole, Double Throw (SPDT) - Green/Blue Bulb... Normally Open or Normally ClosedA variation on the standard normally open or normally closed float switch, this float may be wired at installation to perform either operation but not both. Available in B1 bulb size only.
Specifications - Float & CableB8 Bulb (Std) Style Is 3.50” X 5.00”Durable Polypropylene Shell Solid Polyurethane Foam Filling Mechanically Activated Mircoswitch Non-Mercury Design Operating Temperature Of 32-170 F Chlorinated Polyethylene Cable SJOOW-300 Volt - 16/2 CableSJOOW-300 Volt - 16/3 Cable For SPDT Design
Mounting OptionsC1 - Zinc Plated, Cast-Iron Cord Weight (1.22 Lbs)C3 - SS Clamp For Pipe Mount C4 - Releasable Poly Tie Strap C7 - Float Collar For 1.00” Pipe Mount
Piggyback Plug OptionsP1 - 120 Volt Piggyback Plug P2 - 230 Volt Piggyback Plug
B8Pear Shaped Bulb
Newest Mechanical Design NOW in Standard Bulb
Available for 48 Hour Shipment in all Cable Lengths
C1 C3
C4 C7
P1P2
R
MERCURY
15Download a variety of files from www.ConeryMFG.com
Specifications - ElectricalS4 - Rated For 13 Amps @ 120 VAC, ½ HP S4 - Rated For 13 Amps @ 230 VAC, 1HP S6 - Rated For 15 Amps @ 120 VAC, 1HP S6 - Rated For 15 Amps @ 230 VAC, 2HP Not For Use With 460 Volt Applications
Designed for accurate liquid level control in many applications including sewage and wastewater environments. Designed to handle direct pump control for sump pumps and other sewage ejectors with piggyback plug option available. Additionally, this float switch can be utilized to signify specific water levels or for direct alarm activation. The durable construction provides for leak-proof operation and tremendous impact resistance.
Operating OptionsNormally Open (N/O) - For pump down applicationsThe mechanical switch contacts are open (or off) in the hanging position. As the float rises 45 degrees above horizontal, the con-tacts close and actuate the switch. The contacts then remain closed until the float switch returns to 45 degrees below horizontal.
Normally Closed (N/C) - For pump up applicationsThe mechanical switch contacts are closed (or on) in the hanging position. As the float rises 45 degrees above horizontal, the contacts open and actuate the switch. The contacts then remain open until the float switch returns to 45 degrees below horizontal.
Single Pole, Double Throw (SPDT) - Normally Open or Normally ClosedA variation on the standard normally open or normally closed float switch, this float may be wired at installation to perform either operation but not both. Available in B1 bulb size only.
Specifications - Float & CableB3 Bulb (Std) Style Is 3.50” X 5.00”Impact Resistant ABS Shell Mechanically Activated Mircoswitch Non-Mercury Design Operating Temperature Of 32-170 F Chlorinated Polyethylene Cable SJOOW-300 Volt - 16/2 CableSJOOW-300 Volt - 16/3 Cable For SPDT Design
Mounting OptionsC1 - Zinc Plated, Cast-Iron Cord Weight (1.22 Lbs) C3 - SS Clamp For Pipe Mount C4 - Releasable Poly Tie Strap C7 - Float Collar For 1.00” Pipe Mount
Piggyback Plug OptionsP1 - 120 Volt Piggyback Plug P2 - 230 Volt Piggyback Plug
B3 - S4 & S6Cylinder Bulb
Heavy Duty Mechanical Float Switch
Available for 48 Hour Shipment in all Cable Lengths
P1
P2
Pump Duty Non-Mercury Float Switch Wide Angle
C1 C3 C4 C7
R
16 Tel: 513-298-1183 • Fax: 866-439-9570 • Email: [email protected]
SFStainless Steel Float Switch
Super Durable Float for High Temperature & Chemical Applications
Control Duty Mercury Float SwitchNarrow Angle
Specifications - ElectricalRated For 10 Amps @ 120 VACRated For 3 Amps @ 240 VACUsable With 12-24 VDC ApplicationsNot For Use With 460 Volt ApplicationsAvailable For Use With Instrinsically SafeCircuits When Used With Proper Relays.
Designed for accurate liquid level control in many applications including chemical wash tanks, violent applications, high temperatures, or sewage environments. This float switch can be utilized to signify specific water levels or for direct alarm activation. This float’s rugged stainless steel construction and heavy duty cable make it ideal for the most difficult float application.
Operating OptionsNormally Open (N/O) - SS Bulb... For pump down applicationsThe mercury switch activates (contacts close) as the float rises 1.00” or 5 degrees above horizontal.Normally Closed (N/C) -SS Bulb... For pump up applicationsThe mercury switch activates (contacts open) as the float rises 1.00” or 5 degrees above horizontal.
Specifications - Float & Cable4.175” x 5.260” Stainless Steel HousingOperating Temperature Of 32-221 FChlorinated Polyethylene Cable SOOW-600 Volt - 14/3 CableMouting Bracket IncludedMounting OptionsWMB-0100... Separate Item Listed In BracketsCustom Bracket That Allows For Simple Float Pole Installation... Can Be Used In Conjunction WithSupplied Mounting Equipment As An Option.
R
17Download a variety of files from www.ConeryMFG.com
Float Sheet Part Number & Price Worksheet
INSTRUCTIONS: A. Fill in the shaded blanks in the boxes below to determine exact part number (Please note that many abbreviations are used - refer to catalog for complete descriptions)
B. Reference the cost amounts below each letter / number designation to build the exact price
C. Stainless floats have their own charts.
CONERY MFG INC PRICE SHEET… 09/1/20111380 ENTERPRISE PARKWAY, ASHLAND, OHIO 44805
PH 419.289.1444 FX 419.281.0366www.conerymfg.com
FLOAT SWITCH PART NUMBER & PRICE WORKSHEET
INSTRUCTIONS: A… FILL IN THE SHADED BLANKS IN THE BOXES BELOW TO DETERMINE EXACT PART NUMBER(PLEASE NOTE THAT MANY ABBREVIATIONS ARE USED - REFER TO CATALOG FOR COMPLETE DESCRIPTIONS)
B… REFERENCE THE COST AMOUNTS BELOW EACH LETTER / NUMBER DESIGNATION TO BUILD THE EXACT PRICEC… USING THE MULTIPLIER TABLE (BELOW & LEFT), DETERMINE THE QUANTITY DISCOUNT FOR NET PRICE.D… STAINLESS FLOATS & VERTICAL FLOATS HAVE THEIR OWN CHARTS.
FLOAT SWITCH BULB SWITCH PIGGYBACK CORD PACKAGING CABLE LENGTHORIENTATION TYPE TYPE PLUG ASSEMBLY (IN 5' INCREMENTS)
REQUIRED REQUIRED REQUIRED (OPTIONAL) (OPTIONAL) (OPTIONAL) REQUIRED
- B - S - P - C - K -15' STANDARD
$38.00 - 2900 $2.00 1 $0.00 - 1 $5.00 - 1 $5.00 - 1 $1.50 - 1 ($2.00) - < 15'NORMALLY OPEN STD BULB - MERC NARROW ANGLE 120V PLUG CORD WEIGHT IND BOXED ANY TYPE FLOAT$38.00 - 2901 $2.00 2 $13.00 - 2 $7.00 - 2 $3.00 - 2 $1.00 - 2 $0.00 - 15'
NORMALLY CLOSED MINI BULB - MERC NA - SPDT 240V PLUG CLAMP - POLY IND BAGGED STANDARD$38.00 - 2902 $0.00 3 $7.00 - 3 $4.00 - 3 $5.00 - + 5'
SPDT MECHANICAL BULB NA - 600V (PLUGS USABLE CLAMP - STNLS S1, S4, S14, 20 AMP$12.00 4 $10.00 - 4 ON WIDE ANGLE $4.00 - 31 $7.50 - + 5'
INT WTD BULB WIDE ANGLE FLOATS ONLY) CLAMP - SM STNLS S2, S5MERCURY $16.00 - 5 $3.00 - 4 $8.25 - + 5'
FOAM FILLED WA - SPDT RLS TIE STRAP S3, S6$12.00 5 $21.50 - 6 $4.00 - 7 $13.00 - + 5'
INT WTD BULB WA 2HP MECH FLOAT COLLAR S7 S8 S9 S10 S11INT WTD BULB WA-2HP MECH FLOAT COLLAR S7, S8, S9, S10, S11MERCURY $12.00 - 14
AIR FILLED WA - 60 DEGREE$10.00 6
INT WTD BULBMECHANICALFOAM FILLED STAINLESS STEEL FLOAT SWITCHES
$10.00 7 SWITCH CABLE LENGTH FLOAT SWITCH SWITCHINT WTD BULB TYPE (IN 10' INCREMENTS) ORIENTATION TYPE
MECHANICAL REQUIRED REQUIRED (OPTIONAL)AIR FILLED
$0.00 8 SF - - -STANDARD BULB 20' STANDARD (NA STANDARD)
MECHANICALFOAM FILLED $25.00 - + 10' NO NA
NORMALLY OPEN NARROW ANGLENC $14.00 WA
NORMALLY CLOSED WIDE ANGLE
$218.00
18 Tel: 513-298-1183 • Fax: 866-439-9570 • Email: [email protected]
Cord Mounting Accessories & Anchor Kits
ANCHOR KIT WITH CHAINAKC-10-3 $ 216.001-each15lbPVCCoatedYellowAnchor 2-each1/4”StainlessSteelShackles 3-eachStainlessSteelFloatClamps 10’of3/16”type316StainlessSteelChain
*Additional3/16”chain(perfoot) $9.50 *Additionalcableclampsforattachingfloats(each)$10.00 Floats not included.
ANCHOR KIT WITH
CABLEAKR-10-3 $ 160.001-each15lbPVCCoatedYellowAnchor2-each1/4”StainlessSteelShackles3-eachStainlessSteelFloatClamps10’of1/4”type304Stain-lessSteelCable*Additional1/4”stainlesssteelcable(perfoot)
$3.00*Additionalcableclampsforattachingfloats(each)$10.00Floats not included.
C10 - Zinc PlatedCord WeightListPrice:$10.00
C20 - Pipe Mount withPoly Band AssemblyListPrice:$7.00
C31 - Pipe Mount withStainless BandListPrice:$8.00
C30 - Pipe Mount withStainless BandListPrice:$8.00
C40 - Releasable TieListPrice:$5.00
C70 - Pipe Mount Float CollarListPrice:$8.00
AKC-10-3
AKR-10-3
19Download a variety of files from www.ConeryMFG.com
Float Brackets
Brackets are designed to keep multiple float switches organized within the basin. All brackets are made of Type 304stainless steel and come with black cord snubbers to securely attach float cables. As an option, liquid tight cord gripsare also available for the same purpose. Brackets are available in different shapes and sizes to accommodate up tosix floats. Additional hook type style brackets are also available. Additionally, the T-shaped bracket styles are suppliedwith a mounting piece so that the bracket itself may be easily removed from the basin with the floats still attached.
L-TYPE BRACKETS List Price3FB...................................................................$43.504FBL...................................................................50.00
T-TYPE BRACKETS4FB.....................................................................57.005FB......................................................................63.506FB......................................................................67.50
T-TYPE BRACKETS W/SIDE HOOKS4FBH....................................................................63.005FBH...................................................................68.004HB.....................................................................57.00
H-TYPE BRACKETS6HFB...................................................................85.00
U-TYPE BRACKET3AHB...................................................................62.006AHB...................................................................68.50
SPECIALTY TYPE BRACKETSWMB-100.............................................................54.001HB.....................................................................25.00
OPTIONAL CORD GRIPSG1.........................................................................4.00Note: To add cord grips to your float bracket order, simply specify G1 after the part number. You will receive the number of cord grips that fit each respective float bracket.
4FBL
3FB
4FB
4FBH
5FB 6FB
6AHB3AHB
6HFB
4HB
WMB-01001HB
G1 Grip
20 Tel: 513-298-1183 • Fax: 866-439-9570 • Email: [email protected]
Bulk chain is always available in drum quantities. For quantity use - Please call for up-to-date pricing
Chain, Cable & Accessories
CUSTOM CHAIN KITSPart Number Description Type 304 Type 316SS316-10-2 3/16”Stainlesssteelchainkit-10’ofchain&2-1/4”shackles.............................. $118.50 $142.00SS140-10-2 1/4”Stainlesssteelchainkit-10’ofchain&2-5/16”shackles................................. 182.00 227.00SS516-10-2 5/16”Stainlesssteelchainkit-10’ofchain&2-3/8”shackles................................. 236.50 283.00SS380-10-2 3/8”Stainlesssteelchainkit-10’ofchain&2-1/2”shackles................................... 342.00 392.00SS120-10-2 1/2”Stainlesssteelchainkit-10’ofchain&2-5/8”shackles................................... 583.50 766.00SSC14-10-2 1/4”Stainlesssteelcablekit-10’ofcable&2-1/4”shackles..................................... 98.00 --*AddadditionalchainfootageorshacklespertheindividuallistpricesnotedaboveChangethe(10)numbertoactualchainfootageChangethe(2)numbertoactualnumberofshackles
STAINLESS STEEL CHAINGrade 30 Proof Type 304 Type 316
Coil Size Drum Qty (ft) SWL (lbs) Wgt/ft (lbs) (per ft) (per ft) 1/8” 500 375 0.25.......................................................$6.25 $7.75 3/16” 1,000or500 800 0.45..........................................................8.50 10.25 1/4” 400or200 1,400 0.78........................................................13.50 17.00 5/16” 200 1,800 0.97........................................................18.00 21.50 3/8” 200 2,800 1.67........................................................25.50 29.00 1/2” 100 4,500 2.25........................................................44.00 58.50
STAINLESS STEEL SHACKLES Type 304 Type 316Size Fits to Size Chain SWL (lbs) Wgt/ea (lbs) (each) (each)
1/4” 3/16” 667 0.09.......................................................$8.75 $10.50 5/16” 1/4”andunder 1,000 0.15........................................................11.50 13.75 3/8” 5/16”andunder 1,500 0.31........................................................12.75 15.50 1/2” 3/8”andunder 3,000 0.73.........................................................21.25 25.50 5/8” 1/2”andunder 4,000 1.26........................................................33.75 40.50
STAINLESS STEEL QUICK LINK Type 304 Type316Size SWL (lbs) Wgt/ea (lbs) (each) (each)
1/4” 880 0.08.......................................................$7.00 $8.50 5/16” 1,700 0.18..........................................................8.75 10.50 3/8” 2,200 0.31........................................................17.50 21.00 1/2” 3,300 0.51........................................................24.75 29.75
TYPE 304 STAINLESS STEEL CABLE List PriceSize Spool Qty SWL (lbs) Wgt/ft (lbs) (per ft)
1/4” 1,000 1,600 0.11........................................................................................ $3.00 5/16” 1,000 2,250 0.17........................................................................................... 5.00
CHAIN & CABLE ACCESSORIES List PriceDescription SWL (lbs) Wgt/ft (lbs) (each)Alloysteelgrablink 6,400 1.92...................................................................................... $80.005/16”-316Stainlesssteeleyebolt 780 0.05......................................................................................... 20.753/8”-316Stainlesssteeleyebolt 1320 0.07......................................................................................... 28.001/4”Stainlesssteelthimble(usew/cable) N/A 0.03........................................................................................... 2.605/16”Stainlesssteelthimble(usew/cable) N/A 0.04........................................................................................... 5.001/4”Stainlesssteelwireclamp N/A 0.05......................................................................................... 10.001/4”Coppersleeve(usew/cable) N/A 0.08........................................................................................... 6.005/16”Coppersleeve(usew/cable) N/A 0.09......................................................................................... 10.00
21Download a variety of files from www.ConeryMFG.com
Quick Disconnect Valve Rail System & HNB Base Elbow Rail Systems
The quick disconnect retrofit system easily converts existing basins to use any 1.25” or 2.00” vertical discharge pump. Cast iron horizontal ball valve with stainless steel components. High pressure, oil resistant hose with threaded ends. To install thread the stainless steel flange to the existing gate valve and hook the QDV hose to your pump. Slide your pump into the basin and the QDV over the flange and you are done.
The HNB-0200 is designed for quick removal of the pump where a complete rail system is unnecessary. In smaller applications, its use allows the pump to be removed simply and easily without disassembling discharge piping. Its heavy-duty thermoplas-tic, glass-filled construction eliminates corrosion issues, yet will still support a sizeable cast-iron pump up to 75 lbs.
QUICK DISCONNECT VALVEItem Description List PriceQDV125 1.25”QuickDisconnectValve.................................................................................. $183.00QDV200 2.00”QuickDisconnectValve.................................................................................... 381.00
STAINLESS STEEL QUICK DISCONNECT FLANGEItem Description List PriceSFL125 1.25”StainlessSteelQuickDisconnectFlange........................................................... $75.00SFL200 2.00”StainlessSteelQuickDisconnectFlange.............................................................. 92.00
QUICK DISCONNECT HOSEItem Description List PriceQDHS125 1.25”QuickDisconnectHose(pricedperfoot).......................................................... $37.00QDHS200 2.00”QuickDisconnectHose(pricedperfoot)............................................................. 42.00*Pleasespecifydesiredlengthinfeet
VALVE HANDLES Item Description List PriceQDVHD24 24.00”StainlessSteelthreadedRemovalHandle..................................................... $71.00QDVHD36 36.00”StainlessSteelthreadedRemovalHandle........................................................ 95.00
HNB-0200List Price: $72.00•Sturdyconstructiontosupportsmallpumpweight•Corrosionfreethermoplastic,glass-filledmaterial•Compactdesignforuseinsmallersystems•Simplematingdesignforeaseofuse•Ratedforpumps/totalweightoflessthan75lbs•2.00”discharge
back viewfront view
22 Tel: 513-298-1183 • Fax: 866-439-9570 • Email: [email protected]
BASIN COMPONENTSItem Description List PriceBGV125 1.25”BronzeGateValve..................................... $41.00BGV200 2.00”BronzeGateValve....................................... 93.00
BRONZE GATE VALVE• Bronze Forged Body• Each Valve Individually Tested• Full Port Design• BGV 125/200/300
Basin Components& Adapt-a-Flex Fittings
ADAPT-A-FLEX FITTING• Provides Water and Vapor Seal• No Gaskets or Sealants Required• Weather and Corrosion Resistant• AAF 050-640
ADAPT-A-FLEX FITTINGSAAF-050 0.50”Fitting........................................................ $5.25AAF-075 0.75”Fitting........................................................... 6.00AAF-100 1.00”Fitting............................................................ 6.00AAF-125 1.25”Fitting............................................................ 6.75AAF-150 1.50”Fitting........................................................... 6.75AAF-200 2.00”Fitting........................................................... 6.75AAF-300 3.00”Fitting........................................................... 8.75AAF-435 4.00”Fitting(Schedule35).................................... 13.50AAF-440 4.00”Fitting(Schedule40).................................... 13.50AAF-635 6.00”Fitting(Schedule35).................................... 19.50AAF-640 6.00”Fitting(Schedule40).................................... 19.50
PLASTIC FULL COUPLINGS• Recommended for Electrical Couplings• Includes Nuts, Bolts, and Washers• PFC 125/150/200
PFC125 1.25”PlasticFullCoupling(Nylon).......................... 44.00PFC150 1.50”PlasticFullCoupling(Nylon).......................... 44.00PFC200 2.00”PlasticFullCoupling(Nylon).......................... 53.00
STAINLESS STEEL FULL COUPLING• Recommended for Discharge Couplings• Includes Nuts, Bolts, and Washers• SFC 125/200
SFC125 1.25”StainlessSteelFullCoupling......................... 107.00SFC200 2.00”StainlessSteelFullCoupling......................... 141.00
CAST IRON INLET HUB• Fits Curvature of Basin• Includes Nuts, Bolts, and Washers• CIH 400/600/800
CIH400 4.00”CastIronInletHub........................................ 37.00CIH600 6.00”CastIronInletHub........................................ 77.00CIH800 8.00”CastIronInletHub..................................... 113.00
STAINLESS STEEL UNION• Type 304 Stainless Steel Component• Quick Disconnection Method• SSU 125/200
SSU125 1.25”StainlessSteelUnion.................................... 58.00SSU200 2.00”StainlessSteelUnion.................................... 98.00SSU300 3.00”StainlessSteelUnion.................................. 277.00
GATE VALVE EXTENSION ROD• Stainless Steel Rod• Directly Attaches to Gate Valve• GVE 24/36• Lengths Available Up to 12’
GVE24 2.00’GateValveExtensionRod............................. 88.00GVE36 3.00’GateValveExtensionRod........................... 105.00
23Download a variety of files from www.ConeryMFG.com
Flexible Entry Hubs & Custom Fabrication
FLEXIBLE ENTRY HUBS• Provides Water and Vapor Seal• No Gaskets or Sealants Required• Weather and Corrosion Resistant• Bolts through Basin Wall
Flexible entry hubs are an ideal solution to provide sure sealing at pipe entry into the basin.
Item Description List PriceFEH-125 1.25”Boot.......................................................... $58.00FEH-150 1.50”Boot............................................................ 58.00FEH-200 2.00”Boot........................................................... 65.00FEH-300 3.00”Boot........................................................... 76.00FEH-400 4.00”Boot............................................................ 83.00FEH-600 6.00”Boot.......................................................... 120.00FEH-800 8.00”Boot........................................................... 150.00
CUStOm FABRICAtION FOR ALL yOUR NEEDS.At Conery Mfg Inc, we are pleased to help with many custom fabrication projects. Many applications require specialty or one of a kind installations necessitating custom parts. Please let us know if you have a specialty project that we can assist with.
We are also adept at reconfiguring base elbow designs to fit with odd applications or non-standard bolt patterns. Pump station rehabilitations are another type of project that routinely requires specialty equipment to match to older equipment previously installed. We would be happy to assist with any of these projects.
Lastly, our customer service team is trained to help with pump station specifications. We are familiar with most pump brands and keep a large volume of information for these brands and pump models. Simply contact us, and a salesperson can work through an entire pump station with you to help determine your needs. For many customers, this allows the bundling of product to save time and money when it comes to sourcing lift station equipment.
24 Tel: 513-298-1183 • Fax: 866-439-9570 • Email: [email protected]
CAST IRON BALL CHECK VALVESItem Description List PriceCIBV125 1.25”BallCheckValvew/tabs............................ $99.00CIBV150 1.50”BallCheckValvew/tabs............................. 129.00CIBV200 2.00”BallCheckValvew/tabs............................. 129.00
CIBC125 1.25”BallCheckValvew/otabs............................. 95.00CIBC150 1.50”BallCheckValvew/otabs........................... 118.00CIBC200 2.00”BallCheckValvew/otabs........................... 118.00
Cast Iron Ball Check Valves & Green Tank Vents
Available in 1.25”, 1.50”, and 2.00”, the freeflo cast iron ball check valves are powder coated, mount vertically or horizontally, and are rated 150 PSI for maximum pressure. The valves have a BUNA-N check ball and features a full flow opening design.
TANK VENTS Item Description List PriceMGV2 2.00”Vent......................................................... $26.00MGV3 3.00”Vent............................................................ 64.00MGV4 4.00”Vent........................................................... 100.00MGV6 6.00”Vent.......................................................... 135.00VENT KITS(Includes Close Nipple and Fiberglass Flange with Vent) ItemDescription
List PriceMV2kt2.00”Ventkit.................................................... $47.00MV3kt3.00” Ventkit....................................................... 93.00MV4kt4.00”Ventkit ..................................................... 139.00CLOSE NIPPLESItem Description
List PriceCN22.00”Schedule80PVCCloseNipple...................... $4.00CN33.00” Schedule80PVCCloseNipple........................ $11.00CN44.00”Schedule80PVC CloseNipple......................$17.00FIBERGLASS FLANGESItem Description
List PriceFL22.00”FiberglassReinforcedPlasticFlange........... $18.00FL33.00” FiberglassReinforcedPlasticFlange.............. 20.00FL44.00”Fiberglass ReinforcedPlasticFlange.............. 24.00
Green tank vents are ideal for providing vacuum relief and excellent for venting sewer gasses. The epoxy sealed stainless steel screen will eliminate insects from entering the basin. The rigid welded steel construction and the durable powder coated finish slows the corrosion of the components and provides a clean look for installation. Vents may be purchased separately or as a kit with a Schedule 80 PVC close nipple and a fiberglass reinforced plastic flange that is UV resistant.
25Download a variety of files from www.ConeryMFG.com
JUNCTION BOXES
Designed to insulate and house electrical wiring for indoor and outdoor applications. Especially well suited forcorrosive or chemical environments. Simple installation, light weight, and easy drilling, punching, and cutting in anyapplication. All components used are UL and cUL listed.
SpecificationsThe 3.50” x 5.50” x 4.00” and the 5.50” x 7.50” x 4.00” junction boxes are made of a durable polypropylene. They arerated for NEMA Types 1, 2, 3, 4X, 6, 6P, 12, and 13 and come standard with hinged lids and captive stainless steel screwswith molded on mounting feet for easy maintenance and installation.The 8.00” x 8.00” x 4.00” junction box is made of a strong polycarbonate. It is rated for NEMA Types 1, 2, 3, 4X, 6, 12,and 13 and comes standard with a hinged lid and stainless steel screws.
3.5” X 5.5” X 4.0” OPTIONSItem Description List PriceJB35 NEMA4Xjunctionboxonly............................................................. $41.00JB35A NEMA4Xjunctionboxwith1each1.50”conduithuband................ 77.00 3each0.50”cordgripsJB35B NEMA4Xjunctionboxwith1each1.50”conduithuband.................. 83.00 4each0.50”cordgripsJB35C NEMA4Xjunctionboxwith1each1.50”conduithuband.................. 88.00 5each0.50”cordgripsJB35D NEMA4X(Custom)junctionboxtoyourspecifications.......................... CALL
5.5” X 7.5” X 4.0” OPTIONSItem Description List PriceJB57 NEMA4Xjunctionboxonly............................................................ $52.00JB57A NEMA4Xjunctionboxwith1each1.50”conduithuband................. 98.00 4each0.50”cordgripsJB57B NEMA4Xjunctionboxwith1each1.50”conduithuband................ 102.00 5each0.50”cordgripsJB57C NEMA4Xjunctionboxwith1each2.00”conduithub,...................... 119.00 4each0.50”cordgrips&2each0.75”cordgripsJB57D NEMA4X(Custom)junctionboxtoyourspecifications......................... CALL
8.0” X 8.0” X 4.0” OPTIONSItem Description List PriceJB88 NEMA4Xjunctionboxonly.......................................................... $112.00JB88A NEMA4Xjunctionboxwith1each1.50”conduithuband................ 160.00 5each0.50”cordgripsJB88B NEMA4Xjunctionboxwith1each2.00”conduithub,..................... 178.00 4each0.50”cordgrips&2each0.75”cordgripsJB88C NEMA4X(Custom)junctionboxtoyourspecifications.......................... CALL
LIQUID TIGHTCORD GRIPS
CONDUIT HUBS1.50”................ List$7.002.00”.......................10.001” Grip
0.71” - 1.00”List $20.50
3/4” Grip0.45” - 0.71”List $9.25
1/2” Grip0.17” - 0.47”List $6.25
UF Grip12/2 & 12/3 - AWG flat wiresList $12.00
26 Tel: 513-298-1183 • Fax: 866-439-9570 • Email: [email protected]
Alarms
Outdoor High Water AlarmsDesigned to sound an audible alarm and illuminate a 360° red beacon light to notify an alarm situation. Equipped with silence button with automatic reset and individual test button. Includes 15’ mechanical float.
Indoor High Water AlarmsDesigned to sound an audible alarm and illuminate a red L.E.D. to notify an alarm situation. Equipped with green “power on” L.E.D., test button, and horn/silence switch with auto reset. Includes 15’ mechanical float.
EXT15H OUTDOOR ALARMList Price: $151.00• NEMA 3R rated for outdoor use• Non-metallic enclosure (6.375” x 4.375” x 3.000”)• 85 db alarm buzzer• 120 VAC electrical rating• Auxiliary contacts (5 AMP max @ 240 VAC)
JB15H OUTDOOR ALARMList Price: $125.00• NEMA 4X rated for outdoor use• Non-metallic enclosure (5.500” x 3.750” x 3.750”)• 85 db alarm buzzer • 6’ 120 VAC power cord
BB15H INDOOR ALARMList Price: $113.00• NEMA 1 rated for indoor use• Non-metallic enclosure (5.500” x 3.750” x 3.750”)• 85 db alarm buzzer• 6’ 120 VAC power cord
TA15H INDOOR ALARMList Price: $104.00• NEMA 1 rated for indoor use• Metallic enclosure (6.000” x 4.000” x 2.500”) • 85 db alarm buzzer • 6’ 120 VAC power cord • External quick connect tabs for float installation
ALARM OPTIONSItem Description List PriceMF MercuryFloatOption.......................10.00## AdditionalCableLenth(PerFoot).....10.00C10 CordWeight...................................... 5.00Adjust“15”inpartnumbertodesignateactualcordlength
27Download a variety of files from www.ConeryMFG.com
Conery Manufacturing Inc.1380 Enterprise Parkway
Ashland, Ohio 44805Tel: 513-298-1183
Fax: 866-439-9570 Email: [email protected]
Conery Mfg Inc warrants to the original consumer that this product shall be free from manufacturing defects for three years after the date of manufacture. During that time period and subject to the conditions set forth below, Conery Mfg Inc will repair or replace, for the original consumer, any component which proves to be defective due to defective materials or workmanship of Conery Mfg Inc.
This warranty does not apply to the misapplication of the products, defects or malfunctions resulting from failure to properly install, operate, or maintain the unit in accordance with the manufacturers instructions, failures resulting from abuse, misuse, accident, or negligence of the product, damage due to lightning or other “Acts of God,” or units which are not installed in accordance with applicable local codes, ordinances, or accepted trade practices.
Warranty is void if installation, service, or repair of any component of the product is performed by anyone other than a licensed electrician or other qualified service personnel.
It is the full responsibility of the original consumer to return defective product or component at their own expense. The consumer shall take full responsibility for the removal, shipping, and reinstallation of the product or component. To return a product under warranty, the original consumer should contact Conery Mfg Inc by telephone and request an RGA (Return Goods Authorization) form. It is the responsibility of the consumer to fill out, in completion, the form and return it with the defective products to Conery Mfg Inc. Conery Mfg Inc may also include a 15% restocking fee for non-defective products that were incorrectly ordered by the consumer.
Any implied warranties of merchantability or fitness are limited to the duration of this written warranty. Conery Mfg Inc shall not, in any manner, be liable for any incidental or consequential damages as a result of a breach of this written warranty or any implied warranty.
Conery Mfg Inc reserves the right to change any and all of the information contained in this warranty with no prior notice.
WARRANTY
Conery Mfg Inc ships all orders via UPS Ground unless specified to be expedited or shipped by freight with a carrier of our choice. Expediting fees may apply.
Conery Mfg Inc charges a standard 15% restocking fee on returned goods.
Restocking Fee
Minimum Order Fee
Conery Mfg Inc reserves the right to include up to a $5.00 minimum order fee for orders that are less than $30.00 before shipping charges.
Shipping Information
Distributed By:Aqua Technology Group
West Chester Ohio 45069Tel: 513-298-1183
Fax: 866-439-9570 [email protected]
www.aquatechnologygroup.com http://store.aquatechnologygroup.com