conete cr elements irtenve dt and i-besamru.ohlert.com/var/cache/261696-be1b65476300f79f37e... ·...
TRANSCRIPT
-
Technologyfor the Precastand Prestressed Concrete Industry
ConCrete elementsInVerteD t AnD I-beAms
ConcreteExperience...NORDI
MP
IAN
TIW
OR
LD-W
IDE
SPA
RES
& T
ECH
NIC
AL
SUPP
ORT
PLA
NT
LAYO
UT
AN
CIL
LARY
EQU
IPM
ENT
CON
CRE
TEEL
EMEN
TS A
ND
APP
LIC
ATIO
NS
CA
STIN
GM
AC
HIN
ES
NO
RD
IMP
IAN
TI
-
ConcreteExperience...
Prestressed Inverted t and I-beamsmade by the best quality casting machines available
InVerteD t AnD I-beAms
FIELD APPLICATIONS resIDentIAl
PRODUCED BY slIPformer teChnology
ELEMENT DIMENSIONS CAn be CUstomIseD
•Trouble-freeelementhandling
•Floorscanbequicklyandeasilyconstructed
•Large production volumes with uniform crosssections even with different cable reinforcementconfigurations
•Assuredqualitybyusingspecificequipmentforthemanufacture of the concrete elements combinedwithahighendqualitycontrolsystem
•The ability to change the dimensions of theconcrete elements and the prestressed steel wireconfiguration according to the element technicalspecifications required. It is a simple and quickoperation to change the necessary parts of theforming insert of the casting machine to vary theheightandthethicknessoftheconcreteelements.
•The use of high tensile strength prestressedstrands, wires or single wire means that theprestressedelementshavelowerreactionsectionsusingconcretemoreefficientlyandthusachievingelementsofahighquality.Reducedsectionsmeanlowerweight,solowertransportandconstructioncostsandallowtrouble-freeelementhandlingand
storageinthestockyard.
•Rigidity during the loading, unloading, liftingand installation. When compared to other nonprestressed elements of the same height theseproducts offer more rigidity and less deformationunderloadandconsequentlyarelesslikelytosuffersurfacecracking
•Theproducedelementshavehighloadresistancesthanks to a low water/cement ratio of concretefrom 0.32 to 0.38. In fact to produce the sameprofiles using traditional methods would requirehigher water/cement ratios and need expensiveformworks. Even though the low water/cementratio employed makes the concrete hard to work,NORDIMPIANTI’s machines have no difficultyproducing particular element shapes with a highlevelofreliability
•InvertedTandIbeamsarenormallychosenforusewithloadbearingwallstructures,sinceputtingthelintel inthewallsdoesnotaffecttheloadbearingcapacityoftheverticalstructure
benefIts
2
T Beams are prestressed concrete elements that have a constant cross section. They are manufactured using high tensile strength prestressed wires or single wire which are embedded within the element.
The production of these elements is achieved using our Slipformer machine that casts continuously on a long production bed without the need of any formwork.
Prestressed beams have many uses in floor construction.
A floor is usually made of prestressed T beams with concrete or clay hollow block in-fills. The in-fill blocks can be laid in two layers. The in-fills keep the weight of the floor to a minimum and are then covered with in-situ concrete to form the ribs and the floor slab.
sIngle beAm DoUble beAm floor fUll beAm floor
-
InVerteD t AnD I-beAms
FIELD APPLICATIONS resIDentIAl
PRODUCED BY slIPformer teChnology
ELEMENT DIMENSIONS WIDth 120 mm h 90-120-150 mmWIDth 140 mm h 130
WIDth 110 mm h 220 mmWIDth 170 mm h 155 mm
INVERTED T-BEAM
H x W (mm) Weight (Kg/m) h 90x120 17,8h 120x120 21,4h 150x120 125
Inverted t-BeAM
H x W (mm) Weight (Kg/m) h 130x140 27,5
The shape of the Inverted T and I-beams varies between defined limits. Generally they have a swallow-tailed upper part and a rough surface giving a good surface key. The in-situ concrete topping during construction forms a monolithic block.
InVerteD t AnD I-beAms
Inverted I-BeAM
H x W (mm) Weight (Kg/m) h 110x200 33
Inverted t-BeAM
H x W (mm) Weight (Kg/m) h 118x155 31
Inverted t-BeAM
H x W (mm) Weight (Kg/m) h 155x168 49,5
54
TROUBLE-FREE ELEMENT hANDLING • FLOORS CAN BE qUICkLY AND EASILY CONSTRUCTED • LARGE PRODUCTION vOLUMES • hIGh ELEMENT RIGIDITY • ASSURED qUALITY • hIGh DURABILITY AND LOAD RESISTANCE
BENEFITS
BENEFITS
ConcreteExperience...
-
Inverted T–Beams can be codified with a Plotter machine to enable product certification and traceability after production.
According to the customer’s requirements our Silpformer can be designed to produces up to 18 T-beams at a time meaning large production rates.
The Plotter machine prints the name of the manufacturer, the production date and the type of steel reinforcement used on the element
Inverted T and I-Beams are produced with NORDIMPIANTI’s Slipformer machine using a combination of concrete dosage, vibration compaction and concrete finishing.
The compacted concrete element is so good that it can support the weight of a person immediately after casting.
76
TROUBLE-FREE ELEMENT hANDLING • FLOORS CAN BE qUICkLY AND EASILY CONSTRUCTED • LARGE PRODUCTION vOLUMES • hIGh ELEMENT RIGIDITY • ASSURED qUALITY • hIGh DURABILITY AND LOAD RESISTANCE
BENEFITS
BENEFITS
InVerteD t AnD I-beAms
ConcreteExperience...
-
InVerteD t AnD I-beAmsConcrete elements ENGLISh vERSION adv
| ev
entr
a.it
norDImPIAntI system srlvia Erasmo Piaggio, 19/A Zona Industriale Chieti Scalo 66100 Chieti (Ch) - ItalyTel. +39 0871 540 222 Fax +39 0871 562 408
for more information, please visit our website: www.nordimpiantisystem.com
Technical deTails are purely indicaTive. nOrdiMpianTi reserves The righT TO change and MOdiFy TheM wiThOuT nOTice