conference chair /coordinator march 23-24, 2018...
TRANSCRIPT
Patron Prof. V.K.Tyagi, Director, BIET, Jhansi Conference Chair/Coordinator Dr. Hiwarkar A.D., H.O.D, Chemical engg Department, BIET, Jhansi
Co-coordinator
Dr.Sudeep Yadav, Assistant Professor, Dept of
Chemical Engineering, Dr. T.P.Singh, Assistant
Professor,Dept of Chemical Engineering
Advisory Committee Prof. R.S.Singh (IIT,BHU), Prof. B.N.Rai (IIT,BHU), Prof. S.P.Chaurasia (MNIT, Jaipur), Prof. I.D.Mall (IIT,Roorkee), Prof .Shishir Sinha (IIT,Roorkee), Dr.V.C.Srivastava (IIT,Roorkee) Advisory Committee(Institute)
Prof. A.K.Solanki,Head CS & IT dept., Dr.A.K.Nigam,coordinator TEQIP-III, Dr.Mukesh Shukla,Head CE dept., Dr.D.C.Dubkarya,head EC&EE dept. ,Dr.Sanjay Agarwal,Dean Academics, Dr.Vikram Singh Yadav,Head AS dept., Dr.Tarun Soota,Head ME dept.
Accommodation Participants have to make their own
arrangements for travel. Limited accommodation
facility may be arranged on request in advance in
the Institute hostel. Location The city of Jhansi is well connected to all parts of
the country by road and rail. It is en-route Delhi-
Mumbai main line of North-Eastern railway.
Nesting amidst greenery on all sides, BIET
campus is approximately 12 Km from Jhansi
Railway station. The nearest Airports are Gwalior
& Agra, which are well connected by trains.
REGISTRATION FORM National Conference on
Recent trends in Chemical Engineering
&Environment Protection March 23-24, 2018
1. Name:……………………………………………………
2. Designation:……………………………………………
3. Gender:……………………………………....…………
4. Category: ……………………….......……………….
5. Organization: …………………………………………
6. Higher Academic Qualification:……………….....
7. PaperID: ………………………………………………
8. Title of the Paper: ……………………………………
………………………………………………………………
9. Address of correspondence: …………………....
………………………………………………………………
10. Phone No.: ……………………………………………..
11. Email: .............…………………………………………
12. Accommodation Required (YES/NO): …………
13. Payment Detail(Bank Draft No.):....................... Amount: …………………….................. Name of Bank/Drawn date: ………………………. Date:
Place: Signature of the participant
Under the aegis
Of
World Bank (TEQIP-III)
National Conference On
Recent trends in Chemical Engineering & Environment
Protection
March 23-24, 2018
Organised by
Department of Chemical Engineering
Bundelkhand Institute of Engineering
&Technology, Jhansi, 284128 (U.P.)
(An autonomous institute)
Telephone: +91 510 232 0349 www.bietjhs.ac.in
Purpose Over the past few decades the world is witnessing the impact of technological advancement in the field of Chemical Engineering. To take full advantage of such development, it is necessary to bring together science & technology professionals, researchers, academicians industry people and valued users on a common platform. It is a timely endeavor indeed because Chemical Engineering is breaking news in the world of science and Technology. The conference will provide opportunities to understand technical challenges and best practices for untapped huge environmental protection strategies in Indian context along with the fundamentals of chemical engineering.
About Bundelkhand Institute of Engineering & Technology Bundelkhand Institute of Engineering & Technology (BIET), Jhansi was founded in year 1986. It is a prestigious Institute with a reputation for excellence at both undergraduate & postgraduate level, fostering the spirit of nation integration among the Institute, close interaction with industry and a strong emphasis from research both basic and applied. About chemical engineering department
The chemical engineering department was
established in 1996 & M.Tech (Energy Science &
Technology) in 2014. Its courses include all
important aspects of chemical engineering with
more emphasis on analysis and implementation of
various types of technologies and development.
Department has fully equipped laboratories to
facilitate students to improve their practical
knowledge in different subjects. We try to insist
value through courses, activities, events and
environment created in department.
well equipped laboratories and departmental library.
Course content The topics to be covered included but are not limited to:
Air pollution control and equipment, Bio fuel, Clean Coal Technology, Ecology and Biodiversity Conservation Economic and Social aspect of Sustainable Development, Ecosystem Restoration
Environmental Science and Technology, Solid waste Management, Sustainable Development and Education
Water pollution and treatment, Advanced Energy Technologies
Renewable energy technologies, Renewable sources of energy
Chemical, Environmental, and Process Engineering Environmental engineering
Recent development in Waste water treatment methods
Chemistry and Chemical Engineering Fundamentals
Submission
Full text Manuscript in specified template should be submitted by one of the authors of the manuscript either through email to [email protected](*.pdf)/Word(*.doc/*.docx) files in specified format shall be considered for review. The corresponding author must submit duly signed copyright form. Specified format of paper and copyright form is available on conference website. All the accepted and presented papers will be published in conference proceedings. The authors will take the sole responsibility for all the issues related to plagiarism, if any. Eligibility & Registration fee: The conference is interdisciplinary in nature and is open to faculty members, PhD research scholars, and industry personnel of Chemical Engg. & its related branches, Mechanical Engg., Civil Engg., Biotechnology, Applied Science & Humanities, Electrical Engineering. The participants must be sponsored by their institutions. Other interested persons may apply. Registration of delegates should be made
be made in advance along by remitting the registration fee along with the registration details as indicated below:
Students/ Research Scholars: Rs. 1000/-
Academician: Rs.1500/-
Industry persons: Rs.2000/-
Mode of application:
Brochure with application form is available for download at Institute website. Registration fee is to be paid via DD favoring Director BIET Jhansi Payable at Jhansi should be sent along with duly completed registration form to [email protected]
Important Dates Full Length Paper Submission: February,27,2018 Notification of Acceptance: March,6, 2018 Registration Deadline: March ,12,2018
Contact Details Dr. Hiwarkar A.D. Department of Chemical Engg. Bundelkhand Institute of Engineering &Technology, Jhansi, 284128(U.P.) Mob No. 9450077707 Email: [email protected]
COPYRIGHT AGREEMENT
Please complete and sign the form and send it with the final version of your manuscript.
It is required to obtain written confirmation from authors in order to acquire copyrights
for papers published in the journal so as to index them to various repositories.
Title of paper:
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
Author(s):
________________________________________________________________________
________________________________________________________________________
_____________________________________________________________________
The undersigned hereby transfer any and all rights in and to the paper including without
limitation all copyrights to the……... The undersigned hereby represents and warrants
that the paper is original and that he/she is the author of the paper, except for material that
is clearly identified as to its original source, with permission notices from the copyright
owners where required. The undersigned represents that he/she has the power and
authority to make and execute this assignment.
This agreement is to be signed by at least one of the authors who have obtained the assent
of the co-author(s) where applicable.
______________________________________________________________
Author's Signature & Date
________________________________________________________
Typed or Printed Name
_____________________________________________________________
Institution or Company
Send to: [email protected]
Paper Heading First Author
1, Second Author
2, Third Author
3
Affiliations of all authors mentioned in above
And e-mail ID also mentioned
ABSTRACT
This document gives formatting instructions for authors preparing papers for publication in the Recent Science Journals. The
authors must follow the instructions given in the document for the papers to be published. You can use this document as both an
instruction set and as a template into which you can type your own text. This document gives formatting instructions for authors
preparing papers for publication in the Recent Science Journals. The authors must follow the instructions given in the document for
the papers to be published. You can use this document as both an instruction set and as a template into which you can type your own
text. Use the word “Abstract” as the title, in 12-point Times New Roman (Italic), boldface type, left aligned as shown, initially
capitalized. The abstract is to be in 12-point, single-spaced type, and may be up to a 250 word length.
Keywords Include at least 5 to 6 keywords
(Abstract and keywords in one column format, and font format times new roman (Italic) and font size 10-point) full justify
I. INTRODUCTION
This document is a template. An electronic copy can be
downloaded from the Recent Science journals website. For
questions on paper guidelines, please contact
1. Page Layout
An easy way to comply with the Recent Science journal paper
formatting requirements is to use this document as a template
and simply type your text into it.
Your paper must use a page size corresponding to A4 which is
210mm (8.27") wide and 297mm (11.69") long. The page
margins can be set as moderate or set as follows:
Top = (2cm)
Bottom = (2cm)
Left = Right = (1cm)
Your paper must be in two column format with a size of
column of 3.38 mm (3.38”) column size with 0.25mm (0.25")
between columns. Spacing between lines in a paragraph is
1.05”. After each section one line space has to be left. Between the paragraphs 6 points space has to be left before
and after the paragraph.
2. Page Style
All paragraphs must be indented. All paragraphs must be
justified, i.e. both left-justified and right-justified.
(i). Text Font of Entire Document
The entire document should be in Times New Roman of font
size 10. Other font types may be used if needed for special
purposes.
Title and Author Details
Title must be in 22 pt Times new roman font Sentence case.
Author name must be in 12 pt regular Times new roman font.
Author affiliation must be in 10 pt regular. Email address
must be in 10 pt Times new roman Regular font.
Table. no
Font Sizes for Papers
Font
Size
Appearance (in Time New Roman )
Regular Bold Italic
10 table caption in
normal font
10 author email address
(in Times new
roman),
cell in a table
Abstract in
normal
letters 10
font times
new roman
(Italic)
abstract heading
bold 12 point
times new roman
12 level-1 heading 12
point bold times new
roman regular font
for paragraph
12 author name 12 point
times new roman
regular font
22 Paper Title 22 point
sentence case format
regular font,
centered
All titles and author’s details must be in single-column format
Every word in a title must be capitalized except for short
minor words such as “a”, “an”, “and”, “as”, “at”, “by”, “for”,
“from”, “if”, “in”, “into”, “on”, “or”, “of”, “the”, “to”, “with”.
Author details must not show any professional title (e.g.
Professor), any academic title (e.g. Dr.) or any membership of
any professional organization.
To avoid confusion, the family name must be written as the
last part of each author name (e.g. Antony S Llyod).
Each affiliation must include, at the very least, the name of the
company and the name of the country where the author is
based (e.g. XXX Private Ltd, Netherlands).
Email address is compulsory for the corresponding author.
3 Section Headings
No more than 3 levels of headings should be used. All
headings must be in 12pt bold Times new roman font. Every
word in a heading must be capitalized except for short minor
words. Sub sections can be put in sentence case with font size
12 bold.
(i). Figures and Tables
Figures and tables must be centered in the columns. Large
figures and tables may span across both columns. Any table
or figure that takes up more than 1 column width must be
positioned either at the top or at the bottom of the page.
Graphics may be full color. Graphics must be drawn using
solid colors which contrast well both on screen and on a
black-and-white hardcopy. The caption of the graph must be
in 10 pt Times new roman regular font. Captions must be of a
single line must be centered whereas multi-line captions must
be justified. Captions with figure numbers must be placed
after their associated figures.
Please check all figures in your paper both on screen and on a
black-and-white hardcopy. When you check your paper on a
black-and-white hardcopy, please ensure that:
the colors used in each figure contrast well,
the image used in each figure is clear,
all text labels in each figure are legible.
a. Figure Captions
Figures must be numbered using numerals. Figure captions
must be in 10 pt Times new roman regular font. Captions must
of a single line must be left aliened whereas multi-line
captions must be justified. Captions with figure numbers must
be placed after their associated figures, as shown in Fig. 1.
Authors are advised not to include low resolution and poor
quality images, since it reduces the credibility of the journal.
Fig. 1: Example of a High definition image (left Align)
b. Table Captions
Tables must be numbered using numbers. Table captions must
be centred and in 10 pt Time new roman Regular font. Every
word in a table caption must be in regular font. Captions with
table numbers must be placed before their associated tables.
Tables should not be images. The contents of the table must
be in 10 point times new roman regular font.
c. Page Numbers, Headers and Footers
Page numbers, headers and footers must not be used.
d. Links and Bookmarks
All hypertext links and section bookmarks will be removed
from papers during the processing of papers for publication.
If you need to refer to an Internet email address or URL in
your paper, you must type out the address or URL fully in
Regular font.
4. CONCLUSIONS
This microsoft word template can be used for preparing the
paper.
5. ACKNOWLEDGEMENT
The heading of the Acknowledgment section and the
References section must not be numbered.
References (Should be one column)
The heading of the References section must not be numbered.
All reference items must be in 10 pt font. Please use Regular
and Italic styles to distinguish different fields as shown in the
References section. Number the reference items consecutively
in square brackets (e.g. [1]).
When referring to a reference item, please simply use the
reference number, as in [2]. Do not use “Ref. [3]” or
“Reference [3]” except at the beginning of a sentence, e.g.
“Reference [3] shows …”. Multiple references are each
numbered with separate brackets (e.g. [2], [3], [4]–[6]).
For Example:
[1] Misra and Kate N. Nagaraj,”Security in Wireless
Ad Hoc Networks”, in Book The Handbook of Ad-
Hoc Wireless Networks (Chapter 30), CRC Press
LLC, 2003.
[2] Midong Yhou, Zygmunt J. Hass, Securing Ad-Hoc
Networks, IEEE Networks Special Issue on Network
Security, November/December 1999.
[3] Data Integrity, from Wikipedia, the free
encyclopedia,[Online]http://en.wikipedia.org/wiki/D
ata_integrity.
[4] Z. Hu, C. Peter, S. Johnson, Ariadne: A Secure On-
demand Routing Protocol for Ad Hoc Networks, in
Proceedings of ACM MOBICOM’02, 1986.
[5] R. Sonzgiri, M. Dehill, V. P. Levine, C. Shields, E.
M. Belding-Royer,” A Secure Routing Protocol for
Ad-Hoc Networks, in Proceedings of ICNP’02,
1978.
[6] Y. Hu, A. Perrig, D. Johnson,”Packet Leashes: A
Defense against Wormhole Attacks in Wireless Ad-
Hoc Networks”, in Proceedings of IEEE
INFOCOM’03, 1965.
Author’s Profile and Image (Should be two
columns) In this last section, author’s add more professional
information about her/him self. And add passport size
image add with their profile.
For Example