1

Conference will be held at Carlos V Hotel Alghero

http://www.hotelcarlosv.it/

12th International Conference on

Fracture and Damage Mechanics

17-19 September 2013 Alghero, Sardinia, Italy

2

Instructions for Speakers

Speakers Guidelines

Each session will be allocated a Chairperson responsible for introducing the

speaker, controlling the timing of the sessions and facilitating questions.

Prior to the Conference

Please ensure that you check the conference program carefully to confirm your

presentation day and time.

Ensure overhead projections / power point slides contain minimal information

and are in print large enough to read from all parts of the room. Body text

should be at least 26 points, in a clear font with a background, which contrasts

with the print. Avoid highly patterned backgrounds or overcrowding of charts

or photographs.

Prior to your Presentation

10 minutes prior to your session commencing, we ask that you proceed to your

allocated room to meet with your session Chairperson.

Audio Visual Setup

There will be a PC and Beamer in each room with Microsoft Powerpoint and

Adobe Acorabat Reader.

On the desktop Folders are created for each session (i.e. Session !, …Session 7

etc.). Please copy your file on to the appropriate folder on the desktop.

The will not be slide or overhead projectors available at the meeting.

During Your Presentation

Presentations are limited to 20 minutes (which allows for 5 minutes for

questions and answers). If your presentation exceeds the time limit you will be

asked to stop because this will disrupt scheduling and encroach on the next

speakers time slot (please be considerate).

Session Chairperson Guidelines

The Chairperson's role on the day is to:

Meet each speaker in the room that you will be chairing 10 minutes

prior to your session commencing. Introduce yourself to each speaker Keep a 'keen eye' on the agenda's timing and to keep the conference

flowing and on schedule. If a speaker is missing, please move on to

the next paper. In this case you may like to allocate more time for

questions. Thank each speaker at the conclusion of their speech. Invite questions to the speaker/s at the conclusion of their

presentations (when time allows) and encourage discussion between

audience and speaker/s. When necessary the Chairperson may exercise

the 'Chairperson's prerogative' to ask questions. 'Field' questions in an orderly manner and repeat questions if necessary.

3

Steering Committee

Prof. M.H.Aliabadi Imperial College, London

Prof. B.Abersek University of Maribor, Slovania Prof. J.K.Kim KAIST, Korea Prof. M.Guagliano Politecnico di Milano, Italy Prof. S-I.Nishida Saga University, Japan Prof. S.W.Shin Hanyang University, Korea Prof. YANG Zhichun School of Aeronautics,

Northwestern Polytechnic University Prof. LI Qingfen, Harbin Engineering University, China

Conference Organisers

Professor Ferri Aliabadi Department of Aeronautics Imperial College, London Prince Consort Road, South Kensington

London, SW7 2BY M.H.Aliabadi@imperial.ac.uk Fax: +44 (0) 2380 260334 Professor Alberto Milazzo Universtity of Palermo Viale delle Scienze, 90128 Palermo, Italy alberto.milazzo@unipa.it

International Organizing Committee

Abersek,B University of Maribor, Slovenia Alfaiate,J Instituto Superior Tecnico, Portugal Ashcroft,I.A Loughborough University, UK Baragetti,S Universita degli Studi di Bergamo, Italy Benedetti,I University of Parma, Italy Cerny,I SVUM , Czech Rep

Chen, D-H Science University of Tokyo, Japan Constantin,N University Politehnica of Bucharest, Romania De Corte, W Ghent University, Belgium Dhondt,G MTU Aero Engines, Germany Doblare,M University of Zaragoza, Spain

Ebara,R Hiroshima Institute of Technology, Japan

Espinosa,C (ISAE), TOULOUSE, France Flewitt,P.E.J BNFL Magnox Generation, UK Fujimoto,T Kyushu Sangyo University, Japan Galvez,J.C Universidad Politécnica de Madrid, Spain

Guagliano,M Politecnico di Milano, Italy Hadavinia,H Kingston University, UK Hashida,T Tohoku University, Japan Hornikova,J Brno University of Technology, Czech, Republic Horst,P IFL, Braunschweig, Germany

Ivankovic,A University College Dublin, Ireland

Jankowski,R Gdansk University of Technology, Poland Kawagoishi,N Kagoshima University, Japan

Kikuchi,M Science University of Tokyo, Japan Kim, Jeong Guk (Korea Railroad Research Institute, Korea) Kisu,H Nagasaki University, Japan Kolednik,O Austrian Academy of Sciences, Austria Korsunsky,A.M Oxford University, UK

Kotoul,M Brno University of Technology, Czech Republic Kuna,M Technische Universität Bergakademie Freiberg, Germany

Lee, Jinyi (Chosun University, Korea) Li Li Harbin Engineering University, China

Li,Q.F Harbin Engineering University, China Makabe,C University of Ryukus, Japan Marsavina,L Politechnica University of Timisoara, Romania Monaco,E Federico II, Naples, Italy Nobile,L University of Bologna, Italy Pappalettere,C Politecnico di Bari, Italy

Pastor,J ESIGEC, University of Savoie, France Piat,R Univeristy of Karlsruhe, Germany Providakis,C Technical University of Crete, Greece Rezaeepazhand,J Ferdowsi University of Mashhad, Iran

Schlangen,E Delft University of Technology, The

Netherlands Sluys,L.J Delft University, The Netherlands Soprano,A Second University of Naples, Italy Takuda,H Kyoto University, Japan Teranishi,T Kyushu Sangyo University, Japan Theilig,H Univ. Appl. Sci. Zittau/Gorliz,

Germany Tohgo,K Tokyo Institute of Technology, Japan Torii,T Okayama University, Japan Toribio,J University of Salamanca, Spain Tsukrov, Igor University of New Hampshire, USA Watanabe, K Yamagata University, Japan

Wang,Z.Q Harbin Engineering University, China

Wen, P.H Queen Mary University of London, UK Yan,S.Y. Harbin Engineering University, China Yigeng Xu. University of Hertfordshire, United Kingdom Yoon,I.S. Induk Institute of Technology, South Korea

Yufeng Zheng Harbin Engineering University, China ZHANG,J-Z Harbin University of Science and Technology, China Zhu,S.F. Harbin Engineering University, China

4

Confirmed List of Oral presentations for 17-19th September (parallel

sessions will be organised and list will be distributed in August

2013). Poster sessions will be announced in August 2013.

Blunt Cracks and Two Parameter Fracture Criteria (Keynote) J. G. Williams and Y. Patel

Fracture Behavior of Epoxies Toughened with Acrylate-Based Block Copolymers (Keynote) by Raymond A. Pearson, Lauren Bacigalupo and Yilin Chen

Numerical and Experimental Investigation of Damage Mechanisms in Bonded Composite Joints (Invited Talk) D.J. O’Dwyer, N.P. O’Dowd, C.T. McCarthy

Damage and Fracture of Novel Continuous Polymer and Carbon Nanofibers and Nanocomposites (Keynote) Y Dzenis

Micromechanical studies of elastic anisotropy, length scale and crystallographic slip in fatigue crack nucleation (Invited Talk) F Dunne

A COUPLED DIFFUSION-PHASE FIELD-CRYSTAL PLASTICITY FRAMEWORK TO STUDY GRAIN BOUNDARY CAVITATION IN IRRADIATED MATERIALS (invited) Esteban Busso

Fracture Characterisation of Reactor Core Graphite under Biaxial Loading (invited talk) D Liu, M Mostafavi, P EJ Flewitt, TJ Marrow and D Smith

Numerical prediction of damage interaction during L-Shaped laminated composite structures unfolding (invited talk) Christine Espinosa, Kobyé Bodjona, Laurent Michel, Frédéric Lachaud

Interference Analysis Between Crack and General Inclusion in an In nite Plate by Body Force Method Takuichiro Ino, Shohei Ueno and Akihide Saimoto

Stress Corrosion Cracking in Pipeline Steels A. Plumtree and S.B. Lambert

Structural integrity of a shaft subjected to multiaxial fatigue loads in presence of short crack M. Fossati, A. Manes, G. Ceresoli, M. Dell’Oro, M. Giglio

Flexural and Shear Capacity Evaluation of Reinforced Ultra-high Strength Concrete Members with Steel Rebars Baek-il Bae, Hyun-Ki Choi and Chang-Sik Choi

Evolution of Shear Localization in an Elasto-plastic Cosserat Material under Shearing Babak Ebrahimian

Recent developments in brittle and quasi-brittle failure assessment of graphite by means of SED Filippo Berto, Paolo Lazzarin and Majid R. Ayatollahi

Principle of universality in crack incubation and propagation Boris Aberšek, Samo Kralj, Jože Flašker

5

Experimental Soil – Concrete Plate Interaction Test and Numerical Models Radim Cajka, Kamil Burkovic, Vojtech Bucht, Roman Fojtik

Modelling Microstructural Effects on the Mechanical Behaviour of a Friction Stirred Channel Aluminium Alloy Catarina Vidal, Virgínia Infante, Yoann Lage and Pedro Vilaça

Nonlinear thermo-mechanical coupled modeling for the analysis of stress distribution in air-plasma-sprayed thermal barrier coatings Yuhui Chen, Shuncong Zhong and Xiaoxiang Yang

A parametric investigation of surface initiated rolling contact fatigue using the asperity point load mechanism D. Hannes, B. Alfredsson

The Cohesive Crack Model Applied To Notched PMMA Specimens Obeying a Non Linear Behaviour Under Torsion Loading David A. Cendón, Filippo Berto, Paolo Lazzarin and Manuel Elices

Micromechanical modelling of advanced ceramics using statistically representative microstructures Patricia Alveen, Declan McNamara, Declan Carolan, Neal Murphy, Alojz Ivanković

The Role of Microstructure on the Fracture Behaviour and Statistics of Advanced Ceramics Declan McNamara, Patricia Alveen, Declan Carolan, Neal Murphy, Alojz Ivanković

Effect of Contact between the Crack Faces on Crack Propagation Guido Dhondt

Statistical Ensemble Interactions in Microstructures where Damage Events Present Gang Qi, Ming Fan and Jianyu Li

Evaluation of the Fatigue Limit of Materials in Static Test Using Thermal Analysis: Effect of the Cross-Head Speed G. La Rosa and A. Risitano

Effect of Carbon Milled Fiber Addition on Interlaminar Fracture Toughness of Carbon Fiber Reinforced Plastics Hideaki Katogi and Kenichi Takemura

Effect of Crystallinity on Mechanical Properties of Carbon Fiber Reinforced Polypropylene Hideaki Katogi and Kenichi Takemura

Mechanical Characterization of Bamboo Fiber-Reinforced Green Composites Hitoshi Takagi and Toshihiro Fujii

Characterization of Al metal matrix composites produced by the stir-casting method K.G. Anthymidis, K. David, A. Trakali and P. Agrianidis

Fatigue Strength of Aluminum Cast Alloy in Plant Oil N. Kawagoishi, K. Kariya, Y. Maeda, E. Kinoshita, Q. Chen and M. Goto

6

Improvement of an Ellipsoidal Void Model for Simulating Ductile Fracture Behavior Kazutake Komori

Fracture Toughness of Advanced TRIP-Aided Martensitic Steels Koh-ichi Sugimoto, Junya Kobayashi and Daiki In

Probabilistic Failure Analysis of Steel Structures Exposed to Fatigue KREJSA Martin

Strength analysis of energy storage flywheel wrapped with composite material Li Hong, Pang Yimeng, Xu Fangfang and Li Li

Green’s Function Solution of Multiple Shallow-buried Cavities and Inclusions in Elastic Semi-space HongLiang Li, Lei Liu

Assessment of UMTS and averaged SED fracture criteria for U-notched specimens Hannelore Filipescu, Cristiana Caplescu and Niculai Pasca

Evaluation of generalized MTS criterion for mixed-mode fracture of polyurethane materials Radu Negru, Liviu Marsavina and Hannelore Filipescu

Effects of variable loading on residual fatigue life of the railway wheelset Pokorný P, Náhlík L., Ševčík M., Hutař P.

A multiaxial notch fatigue methodology to estimate in-service lifetime of corroded cast iron water pipes W. Brevis, L. Susmel, J. B. Boxall

Length Influence on Stress Concentration in Orthotropic Plates Milagros Sánchez, Nando Troyani

Lamb-wave Based Technique for Multi-site Damage Detection Z. Sharif Khodaei, O. Bacarreza and M.H. Aliabadi

Application of the Monkman-Grant relationship for ultrafine-grained metallic materials Marie Kvapilova, Jiri Dvorak Petr Kral ,Milan Svoboda and Vaclav Sklenicka

Multiscale Modeling of Nanocomposite Structures With Defects Marino Brcic, Marko Canadija Josip Brnic

Surface Damage and Fatigue Strength of Ultrafine Grained Copper Treated by Mild Annealing N. Teshima, M. Goto, S.Z. Han, K. Euh, K. Yamauchi and N. Kawagoishi,

Current Activities for Standardization of Test Method for Interfacial Fracture Toughness of Thermal Spray Coatings in Japan M. Arai, Y. Yamazaki, M. Suzuki , Y. Miyashita and H. Waki

Numerical Prediction of the Long Term Creep Crack Growth Behaviour in Type 316H Stainless Steel A. Mehmanparast a and K. M. Nikbin

Crack Deflection from the Interface between two Orthotropic Materials- Effect of higher Order Terms in Asymptotic Analysis Petr Damborský, Oldřich Ševeček, Tomáš Profant, Michal Kotoul

Anisotropic damage phenomena in filled elastomers: experimental observation and constitutive modeling Mikhail Itskov and Roozbeh Dargazany

FE Modeling of FRP-concrete Interface for Very High Cycle Fatigue Behavior M. Mahal, T. Blanksvärd and B. Täljsten

7

Numerical lifetime prediction of polymer pipes taking into account residual stress Pavel Hutař, Martin Ševčík, Luboš Náhlík, Adreas Frank,Jaroslav Kučera and Gerald Pinter

Numerical modelling of the change in stiffness properties of cross-ply laminates subjected to large bending curvatures A. Schmitz and P. Horst

Virtual testing for fracture toughness, fatigue crack growth and fatigue life data estimation of metallic components Michele Pettinà, Bahram Farahmand, Filippo Berto, Frank Abdi

EEffect of fabric weave geometry and strand orientation on Mode I interlaminar toughness of glass-epoxy laminates Piotr Czanocki, Bogdan Hernik

A study of rock crack fracture under different temperatures LI Li-yun, LI Ming-xiu, XU Zhi-qiang, FAN Chen,LIU Da-an

Path-independent -Integral Based on Finite Deformation Theory LIU Zongmin, MAO Jize, SONG Haiyan

Grain Boundary Fracture Behavior and Segregation of P under Low Tensile Stresses in Steel 2.25Cr1Mo and 12Cr1MoV Fu Yu-dong, Li Qing-fen

Damage-involved response of two colliding buildings under non-uniform earthquake loading Robert Jankowski

Practical Method for Estimating Corrosion Depth of Uncoated Carbon Steel Using Thickness of the Corrosion-product Layer Shigenobu Kainuma, Yuya Yamamoto, Hideyuki Hayashi, Yoshihiro Itoh

Fracture toughness and cracking behaviour of SCC compared to VC Sara Korte, Veerle Boel, Wouter De Corte and Geert De Schutter

Hypersingularities in three-dimensional crack configurations in composite laminates Sascha Hell, Wilfried Becker

Influence of crack front shape on 3D numerical modelling of plasticity-induced closure of short and long fatigue cracks S.Fiordalisi, C. Gardin, C. Sarrazin-Baudoux, M. Arzaghi and J. Petit

CORROSION BEHAVIOR OF A WC/C COATED 7075-T6 ALUMINUM ALLOY S. Baragetti, M.Daurù, R.Gerosa, B.Rivolta

Fatigue behaviour of thin coated Al 7075 alloy with low temperature PVD coatings Sergio Baragetti, Riccardo Gerosa and Francesco Villa

The competition between adhesive and cohesive fracture at a micro-patterned polymer-metal interface O. van der Sluis J.J.C. Remmers M.A.C. Thurlings, B.J. Welling S.P.M. Noijen

8

Evaluation of Elastic Properties of Satin Composites S. Patel, O. Bacarreza and M.H. Aliabadi

Computational modelling of brittle failure in polycrystalline materials using cohesive-frictional grain-boundary elements I. Benedetti, M.H. Aliabadi

Dislocation Clusters and Microcracks in Thin Films of LCF -Tested Austenitic Steel T. Eterashvili , T. Dzigrashvili and M. Vardosanidze

Application of Laplacian operators on noisy data to compute curvature with proper orthogonal decomposition M. Thiene, U. Galvanetto, M. Gherlone, M. H. Aliabadi

Fatigue crack growth in Fe mini-samples consolidated by means of impact sintering Tomasz Brynk, Barbara Romelczyk, Anatolii Laptiev, Oleksandr Tolochyn, Zbigniew Pakiela

Application of ductile damage concepts in the evaluation of material formability during screw head cold forming, T. Coppola, L. Cortese , C. Guarnaschelli, I. Salvatori

Modeling of Cure-Induced Residual Stresses in 3D Woven Composites of Different Reinforcement Architectures Igor Tsukrov, Borys Drach, Harun Bayraktar, Jon Goering

Determination of triaxial tensile failure surfaces for curing epoxy resins Todd Grossa, Jordan Kuschb, Igor Tsukrovc

Fatigue Performance of Copper Alloys in Seawater Environment Jochen Aufrecht, Andrew Drach, Adolf Grohbauer, Uwe Hofmann, Stefan Theobald, Igor Tsukrov

Investigation of fracture and electrical resistivity parameters of cementitious composite for their utilization in deterioration models Václav Veselý , Petr Konečný, Petr Lehner, Přemysl Pařenica, Jan Hurta and Libor Žídek

Balanced energy dissipation at propagating crack tip in quasi-brittle materials? – Analysis via soft-computing methods V. Veselý, P. Frantík, R. Vidya Sagar, M. Štafa and T. Pail,

Influence of Dissipative Structures Formed by Impulsed Loads on the Processes of Deformation and Fracture Volodymyr Hutsaylyuk, Mykola Chausov, Valentin Berezin, Andriy Pylypenk, Katerina Volyanska

Mass-optimized Design of Guyed Wind Turbine Tower using Struts Robert T. Rudolf, Florian Roscheck, Yuuta Aono, and Torsten Faber

Numerical Modelling and Bearing Capacity of Reinforced Concrete Beams Oldrich Sucharda, Jiri Brozovsky and David Mikolasek

Determination of Stress Intensity Factor for Cracked Brazilian Disc Using Weight Function Zhao Yanhua, Liu Jin, Gao Hongbo, He Huanan, Zhang Tao

9

Torsion Characteristics on Drive Shaft of Independent Wheel Drive for Articulated Vehicle Yeon-Su Kim, Sung-Hyuk Park, Sung-Cheol Yoon and Jai-Kyun Mok

Giga-cycle property of a new age-hardened aluminium alloy containing excess solute magnesium Yoshimasa TAKAHASHI, Hiroaki YOSHITAKE, Takahiro SHIKAMA Hiroshi NOGUCHI and Masanori TAKUMA

Boundary Conditions in a Multiscale Homogenization Procedure Tomislav Lesičar, Zdenko Tonković, Jurica Sorić

A Study on the Structural Fracture of Body Structure in Railroad Car Sung-Cheol Yoon, Yeon-Su Kim, Jeongguk Kim, Sung-Hyuk Park and Hee-Up Lee

Recrystallization Technique of Plastic and High Strain Zones and Fracture in Small Punch Specimen Loaded at RT and 77K of 304 Stainless Steel Y.Iino, H.S.Yu ,T.Y.Kim ,S.H.Chung

Partial Transient Liquid Phase Metals Layer-Surface Coating for Improved Oxidation Resistance and Low Cycle Fatigue Crack Initiation Life at 1073K in Air of TiAl Alloy Y.Iino

Cracks interaction due to sequential indentation in curved brittle coating: Effect of relative orientation Tarek Qasim and Susan Al-Khateeb

Detailed crack-tip stress field description in a specimen subjected to mixed-mode loading Lucie Šestáková

Evaluation of Fatigue Crack Growth Rates and Threshold Conditions in an Al 2124-T851 Alloy at Different Load Asymmetry Considering Microstructure Orientation Ivo Černý

Evaluation of Overloading and Crack Closure Effects on Fatigue Crack Growth in an Aircraft 7075-T7351 Al-Alloy Ivo Černý and Dagmar Mikulová

Effects of the Interference Level on the Residual Stresses in a Cold-Working Expansion Method M. Giglioa, M. Lodib, L.Giudicic

Evaluation of Elastic Structural Integrity of a 70 kW Class Lab-Scale PCHE Prototype under the Test Conditions of HELP Kee-nam Song and S-D Hong

Modelling Porosity in Quasi-Brittle Reactor Core Graphite GE Smith, PEJ Flewitt, A Hodgkins

J Integral Computation For Repaired Cracks With Bonded Composite Patch In Aircraft Structures F. Benyahia, A. Albedah, B. Bachir Bouiadjra, M. Belhouari

CRACK LENGTH ESTIMATION FROM THE DAMAGE MODELISATION AROUND A CAVITYI IN THE ORTHOPEDIC CEMENT OF THE TOTAL HIP PROSTHESIS. S.Benbarek, A.Sahli, M.M.Bouziane, B.Bachir Bouiadjra, B.Serier

10

Finite element analysis of the mechanical behaviour of the different cemented hip femoral prostheses M. M. Bouziane, S. Benbarek, S.M.H. Tabeti, B. Bachir Bouiadjra, B. Serier and T. Achour

Experimental investigation about surface damage in straight and crowned misaligned splined couplings Vincenzo Cuffaro, Francesca Curà and Andrea Mura

Simulation of Adhesion Performance of Mortar-Mortar Interface with Varied Fractographic Features Ayumi Satoh, Kanji Yamada and Yasuji Shinohara

Bi-material notches under various normal-shear loading modes J. Klusák, D. Kopp, T. Profant

Microtensile video tester for observation of banana and abaca reinforced composites failure Z. Ortega, M. D. Monzón, A. N. Benítez, A. Tcharkhtchi, S. Farzaneh

Analytical design of gigacycle fatigue specimens for size effect evaluation A. Tridello, D.S. Paolino, G. Chiandussi, M. Rossetto

Propagation behavior of naturally initiated small crack in austenitic heat resistant steel under thermo-mechanical fatigue loading Yasuhiro Yamazaki, Wataru Fujiki and Yutaro Hara

The Role of Methane Hydrates in the Failure of a Gas Pipeline F. Caputo, F. Cascetta, G. Lamanna, G. Rotondo, A. Soprano

Numerical Investigation on LEFM limits under LSY conditions F.Caputoa, G.Lamannab, L. Lanzilloc, A.Sopranod

Modeling Fatigue Damage of Concrete Dobromil Pryla, Jitka Mikolášková and Radomír Pukl

Experimental and numerical investigation of delamination in curved-beam multidirectional laminated composite specimen Laurent Michel, Sebastian Garcia, Chen Yao, Christine Espinosa, Frédéric Lachaud

Three-dimensional finite element analysis of single-lap joints: effect of adhesive thickness and Poisson's ratio R. Afshar, F. Berto and P. Lazzarin

Experimental investigation of corrosion processes on weathering steel structures Vit Krivy, Viktor Urban and Lukas Fabian

BEM analysis of a Piezoelectric Structural Health Monitoring system for Delamination Detection Andrea Alaimo, Alberto Milazzo, Calogero Orlando

Influence of reinforcement particle sizes on the joining strength of the FSSWed PVC joint compounded SiC particle in welded area Yohei KURABE, Yukio MIYASHITA and Hisashi HORI

11

Gun bullet deformation Analysis for Protection Board Development Hidetoshi Sakamoto, Yoshifumi Ohbuchi, Hiroyuki Kuramae

Effect of triaxiality and Lode angle on the plasticity behaviour of a Ti-6Al-4V Titanium alloy Andrea Gilioli, Andrea Manes, Marco Giglio, Nima Allahverdizadeh

Fatigue Characteristics of Nonferrous Bolts Shinji Hashimura, Tetsuya Torii, Yukio Miyashita, Shigeru Yamanaka and Genki Hibi

Ultrasonic Corrosion Fatigue Behavior of Duplex Stainless Steel Ryuichiro Ebara and Yuya Miy

Evaluation of Torsional Rigidity for Micro-Lattice Plates Kuniharu Ushijima, Dai-Heng Chen and Wesley J. Cantwell

Effect of Processing Layer on Fatigue Strength of Extruded AZ61 Magnesium Alloy Yukio Miyashita, Kyohei Kushihata, Toshifumi Kakiuchi and Mitsuhiro Kiyohara

Fracture mechanics of fiber-matrix interfaces in composites under transverse loading Christian Marotzke, Titus Feldmann

Thermal Conductivity Design for Locally Orthotropic Materials Romana Piat and Yuriy Sinchuk

Experiments Method Design Applied to Optimization of Patch Repairs for Cracked Plates M. Belhouari , S.M. Fekih, K. Madani , A.Amiri and B. Bachir Bouiadjra

An Automated Method for the Measurement of Fatigue Crack Progression Tavares, Paulo J; Viriato, N.S. and Moreira, P. M. G. P

Dynamic crack analysis in layered piezoelectric composites under time-harmonic loading M. Wünsche, F. García-Sánchez, Ch. Zhang and A. Sáez

A SYNTHESIS OF THE FATIGUE BEHAVIOR OF STAINLESS STEEL BARS UNDER FULLY REVERSED AXIAL OR TORSION LOADING BY USING THE SPECIFIC HEAT LOSS Meneghetti G, Ricotta M, Negrisolo L, Atzori B

Inner damage and external dent in composite structures after impact – Part I : experimental observations Christine Espinosa, Miriam Ruiz-Ayuso, Frédéric Lachaud A Unified Model for Micromechanics Damage in the Asphalt Concrete Michele Buonsanti, Giovanni Leonardi and Francesco Scopelliti

Fatigue properties of a low-alloy steel with a nano-structured surface layer obtained by severe mechanical treatments S. M. Hassani-Gangaraj, A. Moridi and M. Guagliano

Nodular Cast Iron – Fatigue Crack Measurement and Simulation Predrag Čanžar, Zdenko Tonković

Thermographic determination methodology: Application on fatigue limit of AL 2024 for R=-1 Stanislav Seitl, Jan Klusák, Pelayo Fernández, Alfonso Canteli

12

Selecting a suitable specimen shape with low constraint value for determination of fracture parameters of cementitious composites Stanislav Seitl, Sara Korte, Wouter de Corte, Veerle Boel, Jakub Sobek and Václav Veselý

A Study on Impact Damage Analysis of Composite Propeller Blade of Turboprop Aircraft Hyunbum Park

Thermo-mechanical investigation of ultra-high molecular weight polyethylene for high strain-rate applications I. A. Ashcroft, C. V. Gorwade, A. S. Alghamdi, V. V. Silberschmidt, M. Song

Two-scale modeling of damage: influence of micro-cracks friction A. Wrzesniak, C. Dascalu, P. Bésuelle

An Estimation on the Performance of High Fluidity Anti-washout Underwater Concrete Jung-Jun Park, Jae-Heum Moon, Jun-Hyoung Park and Sung-Wook Kim

3D global-local analysis using mesh superposition method A. Sellitto, R. Borrelli, F. Caputo, T. Ludwid, A. Riccio, F. Scaramuzzino

High accurate solutions of nonlocal elasticity for sphere (Invited talk) P.H. Wen, X.J. Huang and Ferri Aliabadi

A numerical model to study the hydrogen embrittlement effect on low-alloy steels Laura Vergani, Giorgia Gobbi and Chiara Colombo

An Experimental-Numerical Hybrid Method to Determine Dynamic Elastic-Plastic Fracture Toughness Zhu Shi-fan, Cao Yang, Guo Chun-huan and Jiang Feng-chun

Evaluation of Interlaminar Shear Strength of Longitudinal GRP Railway Bogie Frames Considering Microstructure Aspects Ivo Černý

TThe Danger of Self-Organizing Structures in Materials Subjected to Dynamical Non-Equilibrium Processes Volodymyr Hutsaylyuk, Lucjan Śnieżek, Mykola Chausov, Valentin Berezin, Andriy Pylypenko

Failure of the Crude-oil Tank Induced by two Independent Corrosion Processes Jiří Sís and Bedřich Votava

Pressure pipe damage: Numerical estimation of point load effect II Zdeněk Majer, Michal Zouhar, Martin Ševčík, Luboš Náhlík and Pavel Hutař

Studying the Effects of Internal and External Microstructure on Fatigue Strength of Materials by Electromagnetic Excitation Technique Mujtaba Syed, Imtiaz Ahmed Claas Mülller and Jürgen Wilde

NA numerical model to study the hydrogen embrittlement effect on low-alloy steels Laura Vergani, Giorgia Gobbi and Chiara Colombo

13

Contact Behaviour of Composite Laminate under Quasi-Static Indentation Load Z. Shen, Y.G. Xu, A. Chrysanthou

Initiation of Fatigue Cracks in Bolted Joints J. Toribio, B. González and J.C. Matos

Influence of the Die Bearing Length on the Hydrogen Embrittlement of Cold Drawn Wires J. Toribio, M. Lorenzo, L. Aguado, D. Vergara and V. Kharin

Study of Multi Pass Welding Temperature Distribution in Dissimilar Steels LiLi1, Khurram Asifa, Hong Li, Shehzad Khurram

Probability Distribution Analysis of Rock Salt Creep Parameters Based On Comprehensive Optimal Acceptance Criteria MA Jiwei, WANG Zhiyin, WU Jinpeng

The Study on Damage Failure of Pipeline under Flood using Entropy Identification Method Liu Miao, Wang Zhiyin, Wang Xin

Effect of stress wave dispersion on Hopkinson pressure bar loaded fracture test Chunhuan Guo, Xinhui Shen, Fengchun Jiang, Guangping Zou

Investigation of bearing strength of single-bolt double-lap joints in composite laminate Cheng Linan ,Zheng Xitao,Tan Chunyang

Effects of ceramic particle reinforcement distribution on the penetration of FGM armor Xiaojun Tang, Zhenqing Wang, Xintao Wang, Xiangnan Meng, Hongqing Lv

Numerical Observation of Damage and Cracking Behavior in Three-Point Bending Asphalt Mixture Beam Xinhua Yang Guowei Zeng, Qin Qian

Numerical simulation on the oblique penetration of ceramic particles reinforced metal matrix functional gradient armor Zhenqing Wang, Xiaojun Tang, Xintao Wang, Xiangnan Meng, Hongqing Lv

Effects of Loading Rate on Strength and Failure of Coal Rock from Hancheng Zhao Bin, Wang Zhiyin and Cui Yunlong

Fracture Toughness of Large Forgings for Power Producing Industry Václav Mentl

Effect of Tearing Strength by Variations in Amount of Adhesive in Laminated Film for Liquid Package Yukihiko MACHIDA, Akira SHIMAMOTO and Hiroyuki AOKI

Long-Term Monitoring of FRP-Concrete Composite Bridge Deck for Cable-Stayed Bridges Using Optical Fiber Sensors Sung Tae KIM, Sung Yong PARK, Keunhee CHO and Jeong-Rae CHO

Skin stringer debonding evolution in stiffened composite panels under compressive load: a novel numerical approach A. Riccio, A. Raimondo and F. Scaramuzzino

14

Damage and Fracture during Contact between a Spherical Indenter and Ice: Experimental Results and Finite Element Simulations

Long-Term Monitoring of FRP-Concrete Composite Bridge Deck for Cable-Stayed Bridges Using Optical Fiber Sensors Sung Tae KIM, Sung Yong PARK, Keunhee CHO and Jeong-Rae CHO

Molecular Dynamics Studies of Spalling and Melting in Shocked Nanocrystalline Pb Meizhen Xiang, Haibo Hu and Jun Chen

Numerical Simulation on Failure Process of Rubber-sleeved Headed Stud Shear Connector Xiaoqing XU, Yuqing LIU , Jun HE , Jie LUO

The Deflection of Donut type Hollow Slab considering Crack behaviors Joo-Hong Chung Hyun-Ki Choi, Seung-Chang Lee and Chang-Sik Choi

Evaluating the critical temperature of creep-fatigue interaction a nickel-based powder metallurgy superalloy Liu Hao, Bao Rui, Lei Weiming, Fei Binjun

Research of Performance about Ceramic Coating on Aluminum Bumper to Resist Hypervelocity Impact Guan Gongshun, Bi Qiang and Zhang Yu

Closed Crack Detection with Nonlinear Instantaneous Baseline Weiliang WU, Wenzhong QU, Li XIAO

Comparison between Fracture Behaviour of Pipe-line Ring Specimens and standard CT specimens Nenad Gubeljak

Corrosion and wear behavior of CAE deposited CrN-PVD coatings L. Montesano, C. Petrogalli, A. Pola, M. Gelfi, V. Sisti, G. M. La Vecchia Modelling of Impact Behavior of Concrete Subjected to Shock Loading Sun Yuan-xiang ,Xu Lin

A Constitutive Model for Bovine Cortical Bone under Cyclic Creep-Recovery Loading Martina Lovrenić-Jugović, Zdenko Tonković and Ante Bakić

The Creep and Fracture Behaviour of the Polyethylene PE100 Ivica Skozrit, Zdenko Tonković, Janoš Kodvanj

Cyclic Creep and Recovery Behaviour of Glass Fibre Reinforced Epoxy Composite Martina Lovrenić-Jugović, Zdenko Tonković and Ljerka Slokar

Damage imaging of pipes in nuclear power plants using torsional guided wave modes Zhaoxiang Wei Hong Xu and Hongyuan Li

Evaluating the critical temperature of creep-fatigue interaction a nickel-based powder metallurgy superalloy Liu Hao, Bao Rui, Lei Weiming, Fei Binjun

15

Research of Performance about Ceramic Coating on Aluminum Bumper to Resist Hypervelocity Impact Guan Gongshun, Bi Qiang and Zhang Yu

The influence of cycling frequency to response loading in fatigue tests for sandwich beam with viscoelastic core Xue Qichao, Zou Guangping, Xue Tao

A study of rock crack fracture under different temperatures LI Li-yun, LI Ming-xiu, XU Zhi-qiang, FAN Chen,LIU Da-an

Path-independent -Integral Based on Finite Deformation Theory LIU Zongmin, MAO Jize, SONG Haiyan

Assessment of Crack Growth from a Cold Worked Hole by Coupled FEM-DBEM Approach R. Citarella, G. Cricrì, M. Lepore, M. Perrella

Parameter identification of crack growth in helicopter blade A.Chellil, A.Nour , S.Lecheb, M.Chibani and H.Kebir

Dynamic behavior to fatigue crack initiation of a glass/epoxy laminate S. Lecheb, A. Nour, A. Chellil, R. Lechani,, H. Kebir

Analysis of thermal residual stresses distribution in circular and elliptical bonded composite repair of metallic cracked structures A. Albedah, R. Mhamdia, F. Benyahia, B. Bachir bouiadjra and B. Serier

Large Deformation and Failure of Thin-walled Film at the Post-buckling Delamination Vitalijs Pavelko, Igors Pavelko and Maxim Smolyaninov

DETERMINATION OF A TRANSIENT DYNAMIC STRESS-STRAIN STATE OF A RECTANGULAR PLATE UNDER A HIGH-SPEED DEFORMATION WITH THE ACCOUNT OF MUTUAL TRANSFORMATION OF MECHANICAL ENERGY AND HEAT Volodymyr Hutsaylyuk

Fitness-for-Purpose Assessment of Railway Axles Subjected to Foreign Object Damage Jürgen Maierhofer

Damage and Fracture of Novel Continuous Polymer and Carbon Nanofibers and Nanocomposites

Dynamic Detection of Reinforced Concrete Bridge Damages by Finite Element Model Updating M.L. Moussaoui, M. Chabaat and A. Kibboua