configure. automatic configuration systems using a cloud connect and 50 smart modules or fewer are...
TRANSCRIPT
![Page 1: CONFIGURE. Automatic Configuration Systems using a Cloud Connect and 50 smart modules or fewer are eligible for automatic configuration using the Tigo](https://reader036.vdocument.in/reader036/viewer/2022062517/56649f345503460f94c51198/html5/thumbnails/1.jpg)
CONFIGURE
![Page 2: CONFIGURE. Automatic Configuration Systems using a Cloud Connect and 50 smart modules or fewer are eligible for automatic configuration using the Tigo](https://reader036.vdocument.in/reader036/viewer/2022062517/56649f345503460f94c51198/html5/thumbnails/2.jpg)
Automatic Configuration
Systems using a Cloud Connect and 50 smart modules or fewer are eligible for automatic configuration using the Tigo SMART app.
All others must be configured online at tigoenergy.com before commissioning.
![Page 3: CONFIGURE. Automatic Configuration Systems using a Cloud Connect and 50 smart modules or fewer are eligible for automatic configuration using the Tigo](https://reader036.vdocument.in/reader036/viewer/2022062517/56649f345503460f94c51198/html5/thumbnails/3.jpg)
Online Configuration
To configure a system online, log in to tigoenergy.com with your installer account.
You can also create an installer account here if this is your first installation.
![Page 4: CONFIGURE. Automatic Configuration Systems using a Cloud Connect and 50 smart modules or fewer are eligible for automatic configuration using the Tigo](https://reader036.vdocument.in/reader036/viewer/2022062517/56649f345503460f94c51198/html5/thumbnails/4.jpg)
New Installation
Click “New Installation” to begin.
Have your site map or string list with bar codes ready.
![Page 5: CONFIGURE. Automatic Configuration Systems using a Cloud Connect and 50 smart modules or fewer are eligible for automatic configuration using the Tigo](https://reader036.vdocument.in/reader036/viewer/2022062517/56649f345503460f94c51198/html5/thumbnails/5.jpg)
Installation Wizard
Complete the five steps of the Installation Wizard
Have your site map or string list with bar codes ready.
![Page 6: CONFIGURE. Automatic Configuration Systems using a Cloud Connect and 50 smart modules or fewer are eligible for automatic configuration using the Tigo](https://reader036.vdocument.in/reader036/viewer/2022062517/56649f345503460f94c51198/html5/thumbnails/6.jpg)
Enter site information:•Address•Site owner information•3rd party finance, if applicable
Click “Next” to proceed
Site Information
![Page 7: CONFIGURE. Automatic Configuration Systems using a Cloud Connect and 50 smart modules or fewer are eligible for automatic configuration using the Tigo](https://reader036.vdocument.in/reader036/viewer/2022062517/56649f345503460f94c51198/html5/thumbnails/7.jpg)
Enter inverter information:• Make and model• Max power• Number of MPPTs• Number of strings• Number of modules per string• MPPT range
Add more inverters if needed.
Equipment – Inverter
![Page 8: CONFIGURE. Automatic Configuration Systems using a Cloud Connect and 50 smart modules or fewer are eligible for automatic configuration using the Tigo](https://reader036.vdocument.in/reader036/viewer/2022062517/56649f345503460f94c51198/html5/thumbnails/8.jpg)
Enter PV module information:• Make and model• Max power• Connector type
Add more than one module type if needed
Equipment – Modules
![Page 9: CONFIGURE. Automatic Configuration Systems using a Cloud Connect and 50 smart modules or fewer are eligible for automatic configuration using the Tigo](https://reader036.vdocument.in/reader036/viewer/2022062517/56649f345503460f94c51198/html5/thumbnails/9.jpg)
Enter Management Unit information• Label – assign a name• Barcode – a 12 digit code located on
the bottom of the case• Number of Gateways
Click “Register MMU(s)” to save
Click “Next” to proceed
Equipment – MMU or Cloud Connect
![Page 10: CONFIGURE. Automatic Configuration Systems using a Cloud Connect and 50 smart modules or fewer are eligible for automatic configuration using the Tigo](https://reader036.vdocument.in/reader036/viewer/2022062517/56649f345503460f94c51198/html5/thumbnails/10.jpg)
Enter your layout information.• Click the grid to begin placing
the modules as they appear on the roof
• Place modules individually or by string
• Choose portrait or landscape
Layout – Place Modules
![Page 11: CONFIGURE. Automatic Configuration Systems using a Cloud Connect and 50 smart modules or fewer are eligible for automatic configuration using the Tigo](https://reader036.vdocument.in/reader036/viewer/2022062517/56649f345503460f94c51198/html5/thumbnails/11.jpg)
Once done with the physical layout it’s time to upload the barcodes.• Use a barcode scanner to save
time• Barcodes can be entered
individually or uploaded in a .csv file
• A labeled template is available on this page for .csv uploads
Layout – Enter Barcodes
![Page 12: CONFIGURE. Automatic Configuration Systems using a Cloud Connect and 50 smart modules or fewer are eligible for automatic configuration using the Tigo](https://reader036.vdocument.in/reader036/viewer/2022062517/56649f345503460f94c51198/html5/thumbnails/12.jpg)
The map with barcodes from the installation site should show how the modules are wired in series
This ensures that your module-level view matches the actual site layout
Organizing Your Layout
![Page 13: CONFIGURE. Automatic Configuration Systems using a Cloud Connect and 50 smart modules or fewer are eligible for automatic configuration using the Tigo](https://reader036.vdocument.in/reader036/viewer/2022062517/56649f345503460f94c51198/html5/thumbnails/13.jpg)
After entering the barcodes you’ll see the modules have all turned green
Save your work and click “Next” to continue
Layout
![Page 14: CONFIGURE. Automatic Configuration Systems using a Cloud Connect and 50 smart modules or fewer are eligible for automatic configuration using the Tigo](https://reader036.vdocument.in/reader036/viewer/2022062517/56649f345503460f94c51198/html5/thumbnails/14.jpg)
Review summary and confirm that everything is correct
You can download a copy of your system map and a table referencing your barcodes
Click “Finish” to save and exit.
Confirmation
This will transmit your configuration file to the MMU or Cloud Connect.