configuring network devices
DESCRIPTION
Configuring Network Devices. Working at a Small-to-Medium Business or ISP – Chapter 5. Objectives. Configure a router with an initial configuration. Use Cisco SDM to configure a Cisco ISR with LAN connectivity, Internet connectivity and basic NAT - PowerPoint PPT PresentationTRANSCRIPT
© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 1
Configuring Network Devices
Working at a Small-to-Medium Business or ISP – Chapter 5
2© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Objectives Configure a router with an initial configuration.
Use Cisco SDM to configure a Cisco ISR with LAN connectivity, Internet connectivity and basic NAT
Configure a Cisco router for LAN connectivity, Internet connectivity and NAT using the Cisco IOS CLI of the Cisco IOS software
Configure a WAN connection from a customer premise to an ISP.
Describe, setup and configure a stand-alone LAN switch
3© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Configure a New ISR Identify the key components on a Cisco ISR
4© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Cisco IOS Software Identify common software image features
5© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Configure a New ISR Describe the procedures to physically set up a new
Cisco ISR
6© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Configure a New ISR Describe the ways a Cisco ISR can be configured
7© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Configure a New ISR Document the configuration of a router with a checklist
8© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Using Cisco SDM to configure a Cisco ISR Describe and perform the steps used to configure LAN
and Internet connections on a Cisco ISR using Cisco SDM.
9© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Using Cisco SDM to configure a Cisco ISR Configure dynamic NAT using Cisco SDM
10© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Configure a Cisco router using the Cisco IOS CLI Describe the role of the CLI in the Cisco IOS and
different modes
11© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Configure a Cisco router using the Cisco IOS CLI Describe what router configuration information the
Cisco IOS CLI show commands provide
12© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Configure a Cisco router using the Cisco IOS CLI Navigate the Cisco IOS CLI and perform basic setup
configuration.
13© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Configure a Cisco router using the Cisco IOS CLI Configure serial and Ethernet interfaces on a router
14© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Configure a Cisco router using the Cisco IOS CLI Configure a default route for the Cisco router
15© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Configure a Cisco router using the Cisco IOS CLI Describe the steps to configure a Cisco router as a
DHCP Server
16© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Configure a Cisco router using the Cisco IOS CLI Configure static NAT on a Cisco router using Cisco IOS
CLI
17© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Backing up a Router Configuration Perform backup and system restore using a TFTP
server
18© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Initial Cisco 2960 Switch Configuration Identify the key components on a Cisco Catalyst 2960
Series Switch
19© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Initial Cisco 2960 Switch Configuration Perform basic physical set up of a stand-alone LAN
switch
20© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Initial Cisco 2960 Switch Configuration Describe how a switch can be managed using a
management network interface (VLAN1)
21© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Initial Cisco 2960 Switch Configuration Connect the stand-alone LAN switch to the router and
verify connectivity
22© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Connecting the CPE to the ISP Describe the steps to install Customer Premise
Equipment (CPE)
Describe necessary installation documentation
23© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Workplace Safety Describe good safety practices when installing network
equipment
24© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Connecting the CPE to the ISP Describe the range of customer connections over a
WAN
25© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Connecting the CPE to the ISP Describe the business and technical justifications for
selecting a specific type of WAN
26© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Connecting the CPE to the ISP Describe the steps to configure a Cisco ISR using SSH
27© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Connecting the CPE to the ISP Describe the procedure for configuring a WAN
connection between two routers
28© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Summary
The Integrated Services Router (ISR) is a good choice for small to medium businesses and ISP-managed customers.
ISRs can be initially configured using SDM or the router IOS CLI.
When using the CLI, “show” commands verify configuration elements.
Switches are assigned IP addresses by configuring them on the management interface, VLAN 1.
An installation plan can minimize disruption to a network when new devices are being added.
Good safety practices must be following when performing installations, to minimize the danger to both technician and device.
Documentation is necessary, both when configuring and when installing network devices.