1April 19, 2023

Configuring Super ASO With Aliases

Select Switch-Over

>Source Options.

- Source system

2April 19, 2023

Configuring Super ASO With Aliases

Click Add to add a new alias for the source system.

3April 19, 2023

Configuring Super ASO With Aliases

Click Add to add a new alias for the source system.

4April 19, 2023

Configuring Super ASO With Aliases

Click the IP Addresses tab to optionally specify:

– DNS – IP and subnet

information

Click OK.

5April 19, 2023

Configuring Super ASO With Aliases

Check box next to the alias,

Select Activate Alias,

Click OK.

6April 19, 2023

Configuring Super ASO With Aliases - Target

Click on the target system window

Select Switch-Over

>Target Options.

7April 19, 2023

Configuring Super ASO With Aliases - Target

Select Add Site (Super ASO) and the Accept Aliases check box.

Configure additional target options as needed

Click OK.

8April 19, 2023

Super ASO Switch-over Configuration With Alias

Replication path #1

Replication path #2

A: SourceA: Source C: AliasC: Alias B: TargetB: Target

Dedicated link

Basic MaxAttach MSS configuration

9April 19, 2023

Successful Fail-over with alias

BB:: TTaarrggeett

B: TargetB: TargetC: AliasC: Alias

Dedicated link

In the case the target detects failure of the source, it will attempt to ping ALL possible paths to the source to be sure the source has actually failed

10April 19, 2023

Successful Fail-over with alias

BB:: TTaarrggeett

The target takes over the alias from the original source and becomes the source. The original source is now the target.

11April 19, 2023

Configuring Super ASO without Aliases (Source Options)

Select Switch-Over>Source Options.

Select the Timeouts tab and make the appropriate entries.

Click IP Addresses. Click the Services tab.

Click OK. To configure the target switch-over options as follows

12April 19, 2023

Configuring Super ASO without Aliases (Target Options)

From the target system, select Switch-Over>Target Options.

Select Add Site (Super ASO) and the Accept Aliases check box.

Configure additional target options as needed

Click OK.

13April 19, 2023

Successful Fail-over without alias

BB:: TTaarrggeett

B: TargetB: Target

Dedicated link

In the case the target detects failure of the source, it will attempt to ping ALL possible paths to the source to be sure the source has actually failed