conic evo - compatible with astra techtm ev€¦ · single unit $13 $13 $40 titanium analog - for...

3.6 4.2 4.8

Final Screw- .050/1.27 hex

19.059 19.060 19.061

14.059 14.060 14.061

Impression Transfer

17.060 17.061

Price

Single Unit $13

$13

$40

Titanium Analog - For 3D Printed Models

Titanium Healing Abutment

3.5mm 20.059/3 20.060/3 20.061/34.5mm 20.059/4 20.060/4 20.061/46.5mm 20.059/6 20.060/6 20.061/6

$24

Use same analog for both 3D printing and stone model

of 9

Purple Yellow Blue

Single Unit

CONIC EVO - Compatible with Astra TechTM EV

14.058

17.059

ON Uniabutment

19.058

17.058

28.060 $27

24.059 24.060

25.059 25.060

$31

24.061

25.061

28.061

Titanium Temporary Abutment

Single Unit 28.058

24.058

Includes an open and closed tray screw

collar height

25ncm torque for 3.6/4.2/4.8 - Use Astra or DESS .050/1.27 hex driver 15ncm torque for uniabutment - Use Astra uniabutment driver or DESS driver part# DTH24H170

E Engaging NE Non Engaging

ENE

Includes final screw - 25ncm torque for 3.6/4.2/4.815ncm torque for uniabutment

NE 28.059

All Plastic Castable Abutment

ENE 30.059

31.059

19.059 19.060 19.061 19.058

Includes final screw - 25ncm torque for 3.6/4.2/4.8 15ncm torque for uniabutment

19.059 19.060 19.061 19.058

Chrome Cobalt Abutment

Includes final screw - 25ncm 19.059 19.060 19.061

30.061

31.061

30.060

31.060

ø10mmD 61.059 61.060 61.061

71.059 71.060 71.061

$38

$45

Titanium

$2550.060 50.061

of 9

$4952.059 52.060 52.061

Intraoral Scan Body

50.058

52.058

Price

19.060 19.061 19.058

50.059

Screw sold seperately 19.059 $13

ø14mmD 62.059 62.060 62.061 $45

3.6 4.2 4.8Purple Yellow Blue

Premilled Blanks

Chrome Cobalt ø14mmD

Desktop Scan Body - Round top

$55Intra Oral Scan Body Driver

DTPEI

Hand driver for tightening and loosening of ALL DESS intraoral scan bodies (parts 52.xxx).

53.500P10 $59

Scan Body on Ti base

ENE

53.200P10


1.0mm

3.0mm 15.359

1.0mm 16.0593.0 mm 16.359

$39Straight Ti base

15.059

15.360

16.06016.360

15.06015.361

16.06116.361

15.061 15.058

collar height NEE

NE

E

ON Uniabutment

Includes final screw -

25ncm torque for 3.6/4.2/4.8 15ncm torque for uniabutment

19.059 19.060 19.061 19.058

Includes final screw -

25ncm torque for 3.6/4.2/4.8 15ncm torque for uniabutment

19.059 19.060 19.061


Made of PEEK, autoclavable and multiple use. Has an embedded screw for correct positioning, flat top and triangle for accurate scanning. 7.5mm height x 4mm width. Also available in titanium with hard anodized surface - contact use for details. Hand tighten or use IO scan body driver part DTPEI.

Slides on tibase or AngleBase and can be scanned intraorally or with a lab scanner. For all Astra EV platforms. FREE STL file - send request to [email protected] more information click this web link - CLICK HERE

Engaging Non Engaging

for 3.6,4.2,4.8 platforms

https://desscatalogs.s3.amazonaws.com/Scan+Body+on+Ti+Base.pdf

NP RP WPGREEN3.5

PURPLE4.5

YELLOW5.7

of 9

AngleBase® Ti Base

36.059 36.060 36.06137.060 37.061

$39

Up to 25º Angulated

Screw Channel

$50Plastic castable sleeves for Straight Ti base*

Pack of 5 32.001-P5 32.001-P532.001-P533.001-P5 33.001-P533.001-P5

37.05919.441 19.460 19.461

32.100-P5

Price

1mm 40.059/1 40.060/1 40.061/12mm 40.059/2 40.060/2 40.061/23mm 40.059/3 40.060/3 40.061/35mm 40.059/5 40.060/5 40.061/5

UniAbutment® on Implant

Uniabutment needs a 1.7mm hex driver - Part # DT24H170. See Page Library files for Exocad, 3Shape, and Dental Wings available on website

collar height

Includes screw part # Torque (ncm) 35 25 25

$50


3.6 4.2 4.8Purple Yellow Blue

ON Uniabutment

EENENE

For custom restorations that are cemented to the tibase, not for direct casting

EENENE

0º

10ºPack of 5

Pack of 5

Pack of 5 20º

$5033.100-P533.101-P5

33.102-P5

33.100-P533.101-P5

33.102-P5NENE

NEPlastic sleeves for AngleBase®

24mm 35mm

DT24TB06 DT35TB06

$47

Total Length: 20mm

The internal connection of this castable sleeve is non engaging.The angle base ti base is not designed to be casted so when using this sleeve you would cement the restoration onto the anglebase.

DT20TB06

AngleBase latch driver

AngleBase Final Screw

19.441 19.460 19.461 Torque (ncm) 35 25 25

$13

35ncm torque. Requires AngleBase Latch Driver.


DESS LOC

1.0mm 88.059/1 88.060/12.0mm 88.059/2 88.060/23.0mm 88.059/3 88.060/34.0mm 88.059/4 88.060/4

$65

DESS LOC Analog

14.054Pack of 10 14.054-P10

DESS LOC Transfer

Closed tray - made of POM 17.054

$13$90

$21

Torque is 30ncm

of 9

Gingival Height

Single Unit

88.061/1

88.061/2

88.061/3

88.061/4

Price3.6 4.2 4.8

Purple Yellow Blue

DESS LOC for Astra TechTM EV

DESS LOC Retention Kits

x1 DLRK-P1 $25

$49divergence up to 20º

x2 DLRK-P2

divergence up to 40ºx1 DLER-P1

x2 DLER-P2

$25

$49

20º x4 1.5 Ibs / 680g DLN2-P4

20º x4 3.0 Ibs / 1360g DLN3-P4

20º x4 5.0 Ibs / 2270g DLN4-P4

40º x4 1.0 Ibs / 450g DLN1-P4

40º x4 2.0 Ibs / 910g DLN6-P440º x4 4.0 Ibs/ 1810g DLN7-P4

divergencebetween implants

up to

up to

up to

up to

Inserts $21

AQUA

ROSE

NEUTRAL

RUBY

LEMON

EMERALD

up to

up to

DLRK kit includes - Metal Housing, Lab Processing Cap, and the following inserts- Black (0 lb), Ruby (1 lbs), Aqua (1.5lbs), Peach (3 lbs), Neutral (5 lbs)

DLER kit includes - Metal Housing, Lab Processing Cap, and the following inserts- Black (0 lb), Ruby (1 lbs), Lemon (2 lbs), Emerald (4 lbs)

Components for on top of Astra EVTM Multibase

of 9

$24

17.50717.507-P417.80717.807-P4

$40

$16$58$16$58

Height

Price

5mm5mm8mm8mm

17.007

Impression Transfer for Multiunit

Includes both open & closed tray screw

Closed Tray Impression Transfer for Multiunit

$25

$49

Hand tightens onto multiunit. Available as single and pack of 4 (P4)

Multiunit Titanium Healing Abutment

20.100 Use Nobel driver to tighten/loosen healing abutment

$55Intra Oral Scan Body Driver

DTPEI

Hand driver for tightening and loosening of ALL DESS intraoral scan bodies (parts 52.xxx).

14.00714.007-P10

$13$90

Multiunit Analog - for 3D Printed Models

10 Pack Single Unit

CUSTOMIZED BULK ORDER PRICING AVAILABLE

52.007A hard anodized matted surface ideal for scanning, made of titanium, autoclavable, and for multiple use. The top part has an embedded screw for correct positioning, flat top and triangle for accurate scanning. The bottom part has internal screw threads to ensure the screw correctly engages into the implant every time. 7.5mm height x 4mm width. Hand tighten or use IO scan body driver part DTPEI.

Desktop Scan Body for Multiunit

50.007 Screw sold seperately. Use screw part #19.006

Intra Oral Scan Body for Multiunit

Use same analog for both 3D printing and stone model. Made of titanium.

All of these components will work on top of the following multiunit abutments -- Nobel, BioHorizons, 3i, Megagen, Hiossen, Neodent, BSB, Astra EV, and DESS

- DESS Multiunits - we make them for Nobel Replace, Nobel Active, Internal Hex, and Straumann Bone Level- For restoring on top of MIS Multiunits and on top of Straumann SRA's (for BLT and BLX) - please see their catalog

Components for on top of Astra EVTM Multibase

of 9

$39

Price

$13

32.007-P5 Pack of 5$50

19.306

All plastic castable sleeve for on top of multiunit tibase 15.007

Screw for AngleBase Ti Base for Multiunit

Torque screw to 15ncm

Plastic sleeves for casting or pressing. Castable should be cemented to ti base only. Screw sold seperately.

DT20TB06 DT24TB06 DT35TB06

$47

Total Length: 20mm 4mm 35mm

AngleBase Ti Base for Multiunit

36.0074.5mm vertical wall shaft Presandblasted for youIncludes AngleBase screw part #19.306. Requires AngleBase Latch Driver

AngleBase Latch Driver

$3915.00715.007/8

6.0mm vertical wall shaft

8.0mm vertical wall shaft

Presandblasted for you.Includes multiunit screw part #19.006 for Nobel unigrip/star driver. For Bulk orders we can package it with any screw you wish.

Straight Multiunit Ti Bases

Up to 25º Angulated Screw Channel

BULK ORDER PRICING AVAILABLE

$1319.00619.006 - P10 $90

Single Unit10 PackTorque screw to 15ncm

Additional screws on page 4 and Screw measurement information on page 9

Multiunit Screw - Nobel Unigrip

All of these components will work on top of the following multiunit abutments -- Nobel, BioHorizons, 3i, Megagen, Hiossen, Neodent, BSB, Astra EV, and DESS


FREE53.007

Slides on top of parts 15.007 or 36.007 only. STL available by emailing [email protected]. For more information click this web link - CLICK HERE

Multiunit Scan Body on Ti base - FREE STL File only

https://desscatalogs.s3.amazonaws.com/Scan+Body+on+Ti+Base.pdf

Components for on top of Astra EVTM MultibaseAll of these components will work on top of the following multiunit abutments -- Nobel, BioHorizons, 3i, Megagen, Hiossen, Neodent, BSB, Astra EV, and DESS


of 9

28.007Single UnitPack of 10 11.007-P10

$27

$90

$45

$31

Price

Titanium Temporary Abutment on top of Multiunit

24.007

Includes multiunit screw part #19.006 for Nobel unigrip/star driver. 1.5 collar height, total height including collar is 12mm.

All Plastic Castable Abutment on top of Multiunit

Single unit includes multiunit screw part #19.006 for Nobel unigrip/star driver. Pack of 10 - screw is sold seperately

Chrome Cobalt Abutment on top of Multiunit

30.007

Includes multiunit screw part #19.006 for Nobel unigrip/star driver.

BULK ORDER PRICING AVAILABLE

$1319.106Torque screw to 10ncm

19.206 $20

$13Torque screw to 15ncm 19.110

$1319.105

19.105-P10Single Unit10 Pack

Torx crew for Straumann Multi-base abutments - use Driver from Straumann or DESS

$90



.0501.27 hex screw for Multiunit - use .050 Driver from Zimmer, BioHorizons, DESS

.048/1.20 hex screw for Multiunit - use .048 Driver from 3i , Megagen, Hiossen, DESS

DLC Coated screw for Multiunit - use Star Unigrip Driver from Nobel or DESS

of 9

35mm

.048/1.20 Hex Latch Driver (for 3i, Megagen, Hiossen)- Laser Mark H 1.20

All drivers lengths are the overall length

18mm 20mm 24mm

$35

Price

DT18H120

Drivers, Handles, Adaptors

DT20HDT20H1201 DT24H120 DT35H120

7mm MDTMAN7009mm MDTMAN900

$35

$65

$35

$45

$35

$45

$35

MDTLAA

Thumb Knob handle for Latch Drivers

Latch style handpiece adaptor for 4x4 Square Connection

DTANGSQ

4x4 Square Driver for inserting Straight Multiunit Abutments

DTMURP

4x4 Square Driver for latch style driver

TWADAP4x4 Square Driver for DESS LOC

DTNBSQ

Adaptor from Straumann torque wrench to 4x4 square connection

$45

DTLOC

Adaptor from Nobel torque wrench to 4x4 square connection

$45

DTSTCA

$45

DTSTSQ

Nobel Biocare Contra Angle Adaptor

DTNBCA

Straumann Contra Angle Adaptor

DT20H122 DT24H122 DT35H122 You can use either the .048/1.22 or .048/1.20 interchangeably

Laboratory handle- for latch drivers

DT35U

$35

$35

DT20U DT24U

Torx® Latch Driver (for Straumann) - Laser Mark T06DT20T06 DT24T06 DT35T06

.050/1.27mm Hex Latch Driver (for Zimmer, BioHorizons, Astra) - Laser Mark H1.27 $35

Unigrip/ Star - Latch Driver ( for Nobel) - Laser Mark UG

DTC20H127 DT24H127 DT35H127

.048/1.22 Hex Latch Driver (for Xive, Frialit, Hiossen) - Laser Mark H1.22 $35

DESSREFERENCE

EQUIVALENT REF.Nº OF ORIGINAL IMPLANT BRAND

PACK OF 10 AVAILABLE

PLATFORM 1. SCREW SOCKET

2. HEAD DIAMETER

DESSREFERENCE

EQUIVALENTREF.Nº OFORIGINALIMPLANTBRAND

PACKOF 10AVAILABLE

PLATFORM 1. SCREWSOCKET

2. HEADDIAMETER

3. HEAD BASE ANGLE

4. DISTANCEBETWEEN SCREW HEAD ANDIMPLANT

5. OVERALL LENGTH

6. HEAD LENGTH

7. DISTANCE FROM THREAD TO HEAD

8. THREAD LENGTH

9. THREAD KIND

RECOM-MENDED TORQUE

COMMENTSScrews fitting Multi-unit® implant systems

19.006 29287available

RP (4,8) UG 2,00

19.106 LPCTSHavailable

RP (4,8) H1,20 2,25

19.206 29285 RP (4,8) UG 2,00

19.306 RP (4,8) Torx® 06 2,20

19.110 H1,27 2,00


WP (6,0) UG 2,50

19.231 29286 WP (6,0) UG 2,50

19.300 RP (4,8) Torx® 06 2,15

19.331 WP (6,0) Torx® 06 2,50

Screws fitting Astra Tech Implants System™ EV and similar implant systems

19.058Uni-abutment® (EV)

H1,27 2,35

19.059 EV 3.6 H1,27 2,15

19.060 EV 4.2 H1,27 2,35

19.061 EV 4.8 H1,27 2,35

19.441 EV 3.6 Torx® 06 2,35

19.460 EV 4.2 Torx® 06 2,30

19.461 EV 4.8 Torx® 06 2,45

standa

rd

standa

rd

standa

rd

standa

rd

144° 4,50 1,70 0,00 2,50 M 1,8 15Ncm Standard screw




0° 7,40 1,40 3,90 2,00 M 1,6 35NcmReplacement screw for DESS ANGLEBase®




RP (4,8) UG 2,00

19.306 RP (4,8) Torx® 06 2,20

19.110 H1,27 2,00

standa

rd

PLATFORM

0º 2,80 3,45 1,35 0,00 2,10 M1,4 15NcmStandard screw. Can be used for bridges, structures and Zirconia abutments

0º 3,60 1,50 0,00 2,00 M1,4 15NcmReplacement screw for DESS ANGLEBase®. Special screw head design Torx for angulated screw channels up to 25º

0º 2,80 3,45 1,35 0,00 2,10 M1,4 15Ncm For the top of the Multibase Abutment EV

Screws fitting on top of the Multibase Abutment EV

of 9

Screw Dimensions

conic evo - compatible with astra techtm ev€¦ · single unit $13 $13 $40 titanium analog - for...

Documents