www.digi.com

Block Diagram

Features/Benefits

Related Products

OverviewThe ConnectCore 9P 9215 family delivers pin-compatible modules utilizing Digi’s 32-bit NS9215 processor and secure 802.11a/b/g WLAN technology, offering the industry’s only network-enabled modules with true long-term product availability that meet the extended life cycle requirements of embedded product designs.

The unique FIMs on the NS9215 processor are two independent 300 MHz DRPIC165X processor cores that allow you to dynamically select application-specific interfaces in software. The growing list of supported interfaces includes UART, SD/SDIO, CAN bus, 1-Wire®, USB device low-speed, I2S and others.

Cost-effective and easy-to-use Digi JumpStart Kit® development solutions allow you to take advantage of the reliable and royalty-free ThreadX®-based NET+OS® platform or the readily available library of software and strong community of the Linux® environment.

Compact ARM9-based core modules combine main processing functionality and unique interface flexibility with secure wired and wireless network connectivity.

• Compact,interchangeable150MHzARM9modules

• Integrated10/100MbitEthernetinterface

• 802.11a/b/gwirelessLANwithWPA2/802.11isecurity

• Richsetofperipheralconnectivityoptions

• 2programmableinterfacecontrollers(FIM)

• Industrial/extendedtemperaturerange

• Pre-certifiedlow-emissiondesign

• DigiprocessorandWLANtechnologyfortrue long-termavailability

• SeamlessmigrationpathtoDigiNET+ARM system-on-chipsolution

Highly Integrated Network-Enabled Core Modules

ConnectCore™ 9P 9215 Family

Design Services SupportAccessory Kits

Supported Software Platforms

80-Pin Board Connector80-Pin Board Connector

GPIO

I/O Hub

75 MHz AHB Bus32-Bit A/D

RJ-45

PHY

U.FL

Up to64 MBSDRAM

Up to16 MBNORFlash

IEEE802.11a/b/g

VectoredInterruptController

PLL CLKGenerator

PowerManagement

Bus ArbiterAES

Accelerator

BootSPI

10Timers/Counters

or 4PWM

IRQ

ADC12b-8ch

UA

RT

UA

RT

UA

RT

UA

RT

FlexibleInterfaceModule

FlexibleInterfaceModuleI2 C

Qua

dra

tureD

ecoder

Mem

oryProgram

Mem

oryD

ata

Mem

oryProgram

Mem

oryD

ata

10/100EthernetMII MAC G

PIO

GPI

O

Ext.PeripheralController

MemoryController

JTAG Testand Debug

Real-TimeClock

NVRAM64 Byte

ARM Digi NS9215

ARM926EJ-S150 MHz

4k I-Cache4k D-Cache

NET OS

Digi JumpStart Kits Overview

Digi JumpStart Kit for NET+OS Digi JumpStart Kit for Embedded Linux

This royalty-free turnkey solution for embedded software development is based on the ThreadX Real-Time Operating System (RTOS), one of the most reliable and field-proven RTOS solutions available. In addition to ThreadX, NET+OS provides the integrated building blocks needed to create product solutions with leading network security using Digi embedded modules and microprocessors.

For professional NET+OS software development, the Eclipse based Digi ESP™ Integrated Development Environment (IDE) for Microsoft Windows with graphical user interface and a high-speed USB 2.0 hardware debugger, is provided out-of-the-box.

• Royalty-freeturn-keysolutionforembeddedevelopment• Builtonfield-provenandcompactThreadXRTOS• Fullyintegratedsupportforsecure,IPv4/IPv6networkingapplications• Professionalsoftwaredevelopmentusing Windows-based Digi ESP IDE

BuiltaroundastandardLinux2.6kerneldistribution,theDigiJumpStartKitforEmbeddedLinux is tailored to the specific needs of embedded Linux development and provides an easy-to-use, complete off-the-shelf embedded development platform. It includes all components that are required to build secure network-enabled products based on the ConnectCore 9P 9215 family.

The kit includes Digi ESP™ for Embedded Linux, a powerful and fully Linux-hosted Integrated Development Environment based on the open Eclipse™ framework. Ideal for new and experienced Linux developers, Digi ESP improves software design productivity by accelerating and greatly simplifying driver and application development through a user-friendly graphical interface.

• CompleteLinuxembeddedLinuxdevelopmentplatform• Royalty-freeandwithoptimized2.6kernelandservices• Linux-basedDigiESPIDEforrapidproductdevelopment• FullLinuxandDigiBoardSupportPackage(BSP)source

Development Kits

Digi JumpStart Kit Contents

Software Platform NET+OS Embedded Linux

Module ConnectCore9P/Wi-9P9215 w/4MBNORFlash,8MBSDRAM

ConnectCore9P/Wi-9P9215 w/16MBNORFlash,32MBSDRAM

Development BoardEthernetconnector,4serialports(1xRS-232/422/485,1xRS-232,2xTTL),user/applicationconnectors,I2C/SPIheaders,ADCheader,screwterminalforaccessto8GPIOsignals,2userpush-buttons,2userLEDs,wake-upbutton,resetbutton,802.3afPoEmoduleconnector,

antennaconnectors,batterybackup,9-30VDCpowersupply,powerswitch,mountingholes

CD/DVDDigi NET+OS CD:

NET+OS7,DigiESPIDE,BSPsourcecode,samplecode,GreenHillsMULTI support option, user documentation

DigiEmbeddedLinux4DVD:Digi Embedded Linux, Digi ESP IDE, Linux and platform specific

source code, Universal boot loader source code (U-Boot), sample code, documentation

DocumentationQuick start guide, Digi ESP tutorial, NET+OS programmer’s guide, NET+OSAPIdocumentation,AdvancedWebServer,hardware

reference manual, development board schematics

Quick start guide, Digi Embedded Linux user’s guide, hardware reference manual, development board schematics

Power Supplies and AccessoriesExternalwallpowersupply(110/240VAC)withinterchangeableoutletadapters (NorthAmerica,EU,UK,andAustralia),Ethernetcable,serialcable,antennas

Other DigiJTAGLinkUSB2.0hardwaredebugger —

Kit Part Numbers

Ethernet Only CC-9P-9215-NET CC-9P-9215-LX

WLAN + Ethernet CC-W9P-9215-NET CC-W9P-9215-LX

Please refer to the feature specs on our website for detailed information about the specific software platform capabilities.

Hardware

Processor Type 32-bitNS9215processor

ARM Core ARM926EJ-S

Cache 4kI-Cache/4kD-Cache

Processor Speed 150MHz

Memory Base Population Upto16MBNORflash Upto32MBSDRAM

Additional Population OptionsRJ-45Ethernetconnector 2/4/8/16MBNORflash 8/16/32MBSDRAM

Flexible Interface Modules (FIMs) 2x300MHzDRPIC165XCPUswith2kprogram/192bytesdataRAM

On-chip 256-bit AES Accelerator •

Power Management Modes On-the-flyclockscaling;Low-powersleepmodes;Configurablescaling/wake-upevents(RTC,ADC,EIRQ,UART,etc.)

Pins/Form Factor Small-footprintmodulewith2x80-pinboard-to-boardconnectors

UART Upto4high-speedUARTs;Maximumdatarate1.8432Mbps

GPIO Upto64GPIOs;2externalIRQs

SPI Masterdatarate33.3Mbps;Slavedatarate7.5Mbps

I2C v1.0businterface;7-bitand10-bitaddressmodes

External Memory Bus 17-bitaddressand16-bitdatabuswith2externalchipselect

ADC 12-bit/8-channel;Externalreference

Timers/PWMUptoten16-/32-bittimers/counters

Modes: internal timer with external terminal count option, external gated timer, event counter Up to 5 PWM functions

LEDs 2 (general purpose)

POR controller •

Watchdog Timer (16-bit) •

Real-Time Clock With64bytesofNVRAMandexternalbatterybackup

JTAG interface •

Quadrature Decoder/Counter •

5V Tolerant General Purpose and Memory Inputs •

Dimensions (L x W x H)1.97in(50mm)x1.97in(50mm)x6.1mm

(populationoptionw/oRJ-45)2.75in(70mm)x1.97in(50mm)x8.6mm

(populationoptionw/oRJ45)

Network Interface - Wired

Standard IEEE802.3

Physical Layer 10/100Base-T

Data Rate 10/100Mbps(auto-sensing)

Mode Full or half duplex (auto-sensing)

Network Interface – Wireless LAN

Standard IEEE802.11a/b/g

Security WEP/WPA/WPA2/802.11i

Frequency 2.4/5GHz

Data Rate Upto54Mbpswithautomaticratefallback

ModulationDBPSK(1Mbps),DQPSK(2Mbps),CCK(11,5.5Mbps),BPSK(6,9Mbps), QPSK(12,18Mbps),16-QAM(24,36Mbps),64-QAM(48,54Mbps)

Typical Transmit Power 18dBm@1Mbps(802.11b)12dBm@54Mbps(802.11g)

Receive Sensitivity -72dBm@54Mbps(802.11a/g)

Connectors 2 x U.FL

ConnectCore™ 9P 9215 ConnectCore™ Wi-9P 9215Platform

DIGISERVICEANDSUPPORT-YoucanpurchasewithconfidenceknowingthatDigiisheretosupportyouwithexperttechnicalsupportandastrongfive-yearwarranty.www.digi.com/support

Visit www.digiembedded.com for part numbers.

BUY ONLINE • www.digiembedded.com

DIGISERVICEANDSUPPORT-YoucanpurchasewithconfidenceknowingthatDigiisheretosupportyouwithexperttechnicalsupportandastrongfive-yearwarranty.www.digi.com/support

Digi InternationalWorldwide HQ877-912-3444952-912-3444

Digi InternationalFrance+33-1-55-61-98-98www.digi.fr

Digi InternationalJapan+81-3-5428-0261www.digi-intl.co.jp

Digi InternationalIndia+91-80-4287-9887

Digi InternationalSingapore+65-6213-5380

Digi International China +86-21-5150-6898www.digi.cn

© 2008-2013 Digi International Inc.All rights reserved. Digi, Digi International, the Digi logo, ConnectCore, Digi ESP, Digi JumpStart Kit, NET+ and NET+OS are trademarks or registered trademarks of Digi International Inc. in the United States and other countries worldwide. ARM and NET+ARM are trademarks or registered trademarks of ARM Limited. All other trademarks are the property of their respective owners. All information provided is subject to change without notice.

91001443C5/1113

Environmental

Operating Temperature -40°Cto+85°C-40°Cto+65°C@100%WLANdutycycle-40°Cto+85°C@33%WLANdutycycle

Storage Temperature -40°Cupto+85°C(-40°Fto+185°F)

Relative Humidity 5%to95%(non-condensing)

Altitude 12,000feet(3,658meters)

Power Requirements (3.3V)

Maximum 554mA(1.83W) 786mA(2.6W)

Typical443mA(1.46W);

UARTB/DandEtherneton716mA(2.36W);

UARTB/D,WLANon,Etherneton

Idle208mA(686mW);

/16clockscaling,Etherneton533mA(1.76W);

/4clockscaling,WLANon,Etherneton

Sleep46mA(151mW);

EIRQwake-up,EthernetPHYoff138mA(460mW);

Wake-uponEIRQ,WLANoff,EthernetPHYoff

Regulatory Approvals

FCC Part 15 Class B, EN 55022Class B

•

EN 61000-3-2 and EN 61000-3-3 •

EN 301 893 v1.5.1 (2008-12) •

ICES-003 Class B, VCCI Class II, AS 3548 •

FCC Part 15 Sub C Section 15.247 •

IC RSS-210 Issue 5 Section 6.2.2(o) •

EN 300 328, EN 301 489-17 •

UL 60950-1, EN 60950 (EU) •

CSA C22.2, No. 60950 •

EN 55024 •

Japan •

• Module Feature

ConnectCore Wi-9P 9215 Bottom View ConnectCore Wi-9P 9215 Top View

ConnectCore Wi-9P 9215 Side View

ConnectCore 9P 9215 Bottom View

ConnectCore™ 9P 9215 ConnectCore™ Wi-9P 9215Platform