connecting adaptors - mi-flues
TRANSCRIPT
ConnectingAdaptors
A B C D E F Lip118 **** **** 141 240 410
A B C D E F Lip146 197 191 141 240 410
Connecting Adaptors and Insert Stove Kits1mm thick stainless steel grade 316
Approvals
Connecting Adaptors are a quick and easyway to connect to a clay lined chimneysystem from connecting pipe.
Design & Speci�cationConnecting Adaptors from Mi-Flues are made from1mm thick stainless steel grade 316.
Installation
Internal O�set Clay Pot Adaptor
All connecting adaptors from Mi-Flues are designed for a quick andeasy installation when a �exible �ue liner is not being used.Connecting manufactured to ensure a trouble free use for yearsahead.
Connecting adaptors are suitable for use on solid fuel appliances.They may also be used on gas and oil, providing it is recommendedby the speci�c appliance manufacturer.
For the best results and to ensure years of trouble free use it isadvisable to make sure the chimney is adequately cleaned and�t for purpose prior to any installation of a connecting adaptorfeatured in this brochure.
Internal Clay Pot AdaptorBC
D
E
F
A
28-5-8ICLA Internal Adaptor 125mm-200mm
5
A B C D E F Lip118 197 191 141 240 410
A B C D E F Lip146 **** **** 141 240 410
BC
D
E
F
A
G
28-125-INTO25 125mm Offset Adaptor 25mmA B C D E F Lip
118 197 191 141 240 410 G25
28-125-INTO50 125mm Offset Adaptor 50mmA B C D E F Lip
118 197 191 141 240 410 G50
28-125-INTO75 125mm Offset Adaptor 75mmA B C D E F Lip
118 197 191 141 240 410 G75
28-150-INTO25 150mm Offset Adaptor 25mmA B C D E F Lip
146 197 191 141 240 410 G25
28-150-INTO50 150mm Offset Adaptor 50mmA B C D E F Lip
146 197 191 141 240 410 G50
28-150-INTO75 150mm Offset Adaptor 75mmA B C D E F Lip
118 197 191 141 240 410 G75
Internal O�set Clay Pot Adaptors allows a connection from 125mmand 150mm diameter connecting pipe to a 200mm clay linedchimney with an o�set of 25mm, 50mm or 75mm.
28-5-9ICLA Internal Adaptor 125mm-225mm
28-6-8ICLA Internal Adaptor 150mm-200mm
28-6-9ICLA Internal Adaptor 150mm-225mm
28-6-8ECLA External Adaptor 150mm-200mm
28-5-8ICLA Internal Adaptor 125mm-200mm
5
A B C D E 143 245 70 345 265
A B C D E 118 245 70 345 265
28-6-9ECLA External Adaptor 150mm-225mm
Connecting Adaptors and Insert Stove Kits 1mm thick stainless steel grade 316
External Clay Pot Adaptor
Installation of an Internal Clay Pot Adaptor
The clay end of the adaptor is tapered to allow the adaptor to bepushed (knocked) up the inside of the clay liner. Clay liners are neverperfectly symetrical, so this allows the adaptor to mold itself insidethe liner.
To �nish o� with Fire Cement and Fire Rope to make a good sealaround the clay liner.
The connecting pipe can then be placed over the spigot of theadaptor.
Again �nish o� with Fire Cement and/or Fire Rope to make a goodquality seal.
Mortar Seal
Clay Pot
Clay Adaptor Section
Flue Gather Hood
Fastener
Locking ClipVitreous EnamelConnector
Clay Adaptor Lip
SecuringBand
Flue Seal
Flow ofDeposits
B
C
D
E
A
28-5-8ECLA External Adaptor 125mm-200mm
5
A B C D E 143 245 70 345 248
A B C D E 118 245 70 345 248
28-5-9ECLA External Adaptor 125mm-225mm
Installation of an External Clay Pot Adaptor
Clay Pot
Mortar Seal
External ClayAdaptor
Place the large end of the clay adaptor over the protruding clayliner - make sure the adaptor covers at least 50mm of the clay linerall the way around.
Becauase clay liners are never perfectly symetrical you will have toseal the gap between the adaptor and clay liner with with FireCement and / or Fire Rope to make a good seal.
The single wall pipe can then be placed over the spigot of theadaptor.
Again �nish o� with Fire Cement and/or Fire Rope to make aquality good seal.
Connecting Adaptors and Insert Stove Kits 1mm thick stainless steel grade 316
Clay Pot Adaptor Kits
Adaptor kits have everything an installer needs to complete aninstallation by using specially developed and high versatile parts.The kits allow an installation from either a 125mm or 150mmdiameter appliance to a 200mm clay pot lined chimney.
Each kit consists of a Clay Adaptor, and extended 45° or 90° bendand a 250mm telescopic length.
Please note: The 250mm section of the kit is not suitable for solidfuel applications due to it exceeding the 150mm maximumhorizontal run as per building regulations.
The 250mm telescopic length can only be used to increase thehorizontal distance from 150mm to the dimensions listed underthe X min and X max as shown below when recommended by theappliance manufacturer.
Installation of a Clay Pot Adaptor Kit
In the case of a full clay adaptor kit being installed, �t the clay adaptorsection as described on the previous page (Installation of Internal ClayAdaptor). The bend section and adjustable section included in the kitare designed to �t telescopically over each other. The bend sectionmust be �tted to the clay adaptor section and then connected to theappliance using the adjustable section, ensuring that the overlapbetween section must not be less than 50mm. (Note current BuildingRegulations part J list a maximum horizontal distance of 150mm on asolid fuel application). A 90° bend can be assumed to be equal to2 x 45° bends. All joints should then be sealed using �re cement and/orsealant (rated to 1000°C).
A
250
XD
BC
Y
150
28-125-INTKIT90 Internal 90° Clay Adaptor Kit
28-5-8ICLA Internal Adaptor 125mm-200mm
5
A B C D X min 125 197 191 236 328
Included in the kit is a 125mm clay adaptor to 200mm claypot, a telescopic length and an extended 90° bend.
419 449 597 Y min X max Y max
28-150-INTKIT90 Internal 90° Clay Adaptor Kit
5
A B C D X min 150 197 191 248 348
Included in the kit is a 150mm clay adaptor to 200mm claypot, a telescopic length and an extended 90° bend.
429 470 609 Y min X max Y max
90° Clay Pot Adaptor Kit
45° Clay Pot Adaptor Kit
XD
BC
Y