construction fixings catalogue

BU

ILD

ING

MET

ALW

OR

K

TEL: 01253 886677 EMAIL: [email protected]: 01253 893393 WEB: www.constructionfixings.com

134

Construction Fixings Limited

SECTION

17 BS EN ISO 9001: 1994FM 12226

A range high quality stainless steel structural wall ties and restraintfixings for construction professionals, available with full technical adviceand project design solutions where required.

CODE TYPE LENGTH BOX per/100

BM01 ST1 200.00 250 44.00BM02 ST1 225.00 250 48.00BM03 ST1 250.00 250 53.60BM04 ST1 300.00 250 POA

Type 1 heavy duty walltie suitable forbuildings of any height.

BM05 RT2 200.00 250 26.00BM06 RT2 225.00 250 26.80

Type 2 general purpose walltie suitable forbuildings up to 15m high.

BM07 HRT4 200.00 250 15.20BM08 HRT4 225.00 250 15.90

Type 4 housing walltie suitable for buildingsup to 10m high.

BM09 AC-02 200.00 250 33.60BM10 AC-02 250.00 250 34.40BM11 AC-02 300.00 250 36.10

General purpose heavy duty double trianglewallties to BS1243.

BM12 SPS 150.00 250 78.40BM13 SPS 200.00 250 92.76BM14 SPS 225.00 250 110.36BM15 SPS 250.00 250 120.08

General purpose heavy duty flat safety wallties.


BM16 PPS 200.00 250 98.26BM17 PPS 225.00 250 99.60BM18 PPS 250.00 250 104.80

A build in tie providing lateral stability tomasonry expansion joints


BM19 SST 130.00 100 98.70BM20 SFT 130.00 100 63.00

SST for connection of new masonry toexisting walls, install at 30 degrees andbend to suit bed joints.SFT for use with timber frames in new buildmasonry.


BM21 TFT 120.00 250 42.80

Construction tie connecting masonry to totimber framed buildings up to 4 storeys. Supplied with stainless steel annular ring nail.

Masonry Wall Ties

Starter Ties

Timber Frame Ties

Allows bonding of new masonry to steelwork, brick, concrete and timberin variable applications, safety end or plain for debonding purposes.

CODE TYPE LENGTH per/100

BM22 SPB 100.00 67.12BM23 SPB 125.00 74.52BM24 SPB 150.00 89.68BM25 SPB 200.00 115.92BM26 SPB 225.00 136.68

BM27 SDB 125.00 81.54BM28 SDB 150.00 89.60BM29 SDB 175.00 96.16BM30 SDB 200.00 104.84BM31 SDB 225.00 136.68

BM32 PPB* 100.00 86.00BM33 PPB* 125.00 89.00BM34 PPB* 150.00 99.20BM35 PPB* 200.00 138.12BM36 PPB* 225.00 147.96

BM37 SPV 100.00 75.92BM38 SPV 125.00 83.32BM39 SPV 150.00 98.48BM40 SPV 200.00 124.72BM41 SPV 225.00 145.48

BM42 SDV 125.00 86.42BM43 SDV 150.00 97.40BM44 SDV 200.00 113.64BM45 SDV 225.00 145.48

BM46 PPV* 100.00 94.80BM47 PPV* 125.00 97.80BM48 PPV* 150.00 110.80BM49 PPV* 200.00 146.92BM50 PPV* 225.00 156.76

*supplied c/w debonding sleeve.

Isolation pads/sleeves should be used with all restraints.

High performance channel, slotted for usewith Omega ties providing restraint tomasonry outer leaves. 21/18 – self anchoring cast-in channel,polystyrene filled for casting and preholed fornail fixing to formwork.28/15 – surface fixed.


BM51 21/18 3M POABM52 28/15 3M POA

BM53 PP21 100.00 114.24BM54 PP21 125.00 121.52BM55 PP21 150.00 124.92BM56 PP21 200.00 144.48

BM57 SP21 100.00 76.68BM58 SP21 125.00 89.08BM59 SP21 150.00 99.20BM60 SP21 200.00 122.96

BM61 SD21 100.00 93.00BM62 SD21 125.00 99.64BM63 SD21 150.00 113.12BM64 SD21 200.00 133.32

CODE DESCRIPTION per/100

BM65 Insulation retaining clip 72.60BM66 Debonding sleeves 48.00BM67 Isolation sleeves 52.80

Isolation pads available POA.

Contact our sales office for furtherliterature and details of the full Ancon CCLwalltie range.

Masonry Restraint Fixings

Movement Ties

Omega Channel System

Accessories

BU

ILD

ING

MET

ALW

OR

K


135


SECTION

17CODE TYPE per/set

BM68 Galvanised 22.60BM69 Stainless Steel 32.64

Quality engineered wall connector system foruse with all brick and block sizes. Provideslateral support to masonry walls in conversion,extension and new building work. Slidinganchor ties to accommodate variable brickcoursing.Galvanised and epoxy coated or stainlesssteel.Suitable for heights up to 3 storeys.

CODE TYPE per/set

GalvanisedBM70 100.00 57.18BM71 125.00 73.56BM72 140.00 78.60BM73 190.00 89.16BM74 215.00 97.87BM75 Tie pack 17.67BM76 Fixings pack 16.71Stainless SteelBM77 100.00 75.93BM78 125.00 90.42BM79 140.00 105.06BM80 190.00 119.55BM81 215.00 134.04BM82 Tie pack 21.27BM83 Fixings pack 22.95

Build in construction joint former providinglongitudinal and vertical masonry movementwhilst maintaining lateral stability andstructural integrity.Bonding ties provide fixing to one side of thejoint while sleeved ties allow masonrymovement.Galvanised and epoxy coated or stainlesssteel.Suitable for heights up to 3 storeys. All formers 2400mm long (2 x 1200mm)Column fix to concrete or steelworkusing fixings pack.

CODE WIDTH LENGTH per/roll

GalvanisedBM84 63mm 20M 15.30BM85 112mm 20M 23.40BM86 175mm 20M 34.80BM87 225mm 20M 47.40BM88 305mm 20M 75.30Stainless steelBM89 63mm 20M 38.40BM90 112mm 20M 58.50BM91 175mm 20M 93.90BM92 225mm 20M 157.50

CODE TYPE WIDTH per/LENGTH

BM93 TMR 50mm 39.52BM94 TMR 100mm 41.60BM95 TMR 150mm 47.99

BM96 SMR 60mm 16.51BM97 SMR 100mm 18.82BM98 SMR 150mm 21.69BM99 SMR 225mm 52.61

Lightweight ladder and lattice stainless steelmasonry reinforcement.SMR – 2.40m lengths.TMR – 3.05m lengths.

A comprehensive range of remedial wall ties for variable substrates incorrosion resistant austenitic stainless steel, all ties are supplied fullyassembled for speed of installation.

CODE LENGTH DRILL per/1

BM100 200.00 12.00 4.60BM101 225.00 12.00 4.82BM102 255.00 12.00 5.26High quality, high performance 12mm expanders, all stainless steelconstruction. DD140 compliant. BS EN ISO 9000 manufactured.Requires installation tools D,B,E.


BM103 200.00 12.00 4.95BM104 225.00 12.00 5.26BM105 255.00 12.00 5.68Detail as type 1 tie combined with fast setting torque control systemcomprising shear necked torque nut designed to fail at correct setting ofinner leaf expander. Requires installation tools B, E.


BM106 195.00 10.00 2.20BM107 220.00 10.00 2.30A cost effective remedial tie using 10mm neoprene expanders,particularly suitable for tying two leaves of masonry of unknown quality.Requires installation tools A, C, E.


BM108 200.00 12.00 4.00BM109 225.00 12.00 4.36BM110 255.00 12.00 4.92A low stress remedial tie using 12mm PVC expanders, providesexcellent fixing for brick and stonework. DD140 compliant.BS EN ISO 9000 manufactured. Requires installation tools B, D, E.


BM111 200.00 12.00 4.00BM112 225.00 12.00 4.40BM113 255.00 12.00 4.78External leaf stainless steel mechanical fix and internal leaf resin fix foruse where inner leaf is poor or unknown quality. BS EN ISO 9000manufactured. Requires installation tools B, E.


BM114 200.00 12.00 3.40BM115 225.00 12.00 3.89BM116 255.00 12.00 4.35External leaf neoprene fix and internal leaf resin fix for use where innerand outer leaves are of soft or unknown materials BS EN ISO 9000manufactured. Requires installation tools B,E.


BM117 200.00 12.00 2.70BM118 225.00 12.00 2.70Internal and external leaf resin fix for use where mechanical expandersare unsuitable, available with resin retaining sieve for hollow materials. BS EN ISO 9000 manufactured.

CODE DESCRIPTION per/1

BM119 Hex setting tool type A 45.00BM120 Hex setting tool type B 72.00BM121 Threaded setting tool type C 48.00BM122 Threaded setting tool type D 72.00BM123 Fixed head torque wrench type E 300.00

Wall Starter Profiles Remedial Masonry Wall Ties

Joint Forming Profiles

Brick Reinforcement – EML

Brick Reinforcement – Ladder

Build in joint reinforcement providing added strength andstability to masonry walls

TYPE 1

TYPE 2

TYPE 3

TYPE 4

TYPE 5

TYPE 6

TYPE 7

SMR

Stainless steel windposts aredesigned to span verticallybetween floors to providelateral support for brickworkpanels.Connections to masonry orsteel & concrete frames aredesigned to permit installationadjustment and are self-adjusting post installation.Windposts are supplied with all required fixings, bracketryand wallties to suit each application and are designed and manufactured to suit eachindividual project. Contact our sales office for further details.

SAH sliding anchors provide masonry restraintusing cavity stems and slidingties to accommodate coursingand vertical movement. Fulltechnical detail and designservice available.

Manufactured in stainlesssteel with 12mm fixing holesthe stems are 25 x 5mm andhave a maximum servicecapacity of 1Kn per stem.

Head options as detailed.

BU

ILD

ING

MET

ALW

OR

K


136


SECTION

17CODE LENGTH DRILL per/1

BM124 165.00 13.00 5.94BM125 180.00 13.00 5.94

Stainless steel external leaf masonry fixing with wood screw connectionfor remedial applications in timber framed buildings.Requires installation tools D, C, E.


BM126 180.00 13.00 9.40

Installed externally these ties allow remedial repairs to steel framedbuildings. Mechanical fix to steelwork and resin fix to outer leafmasonry.Requires installation tools C, E.


BM127 600.00 12.00 43.50

Stainless steel remedial transverse tie for use with resin systems.Installed across masonry cracking to reinforce and reinstate damagedwalls.Full technical details on request.


BM126 1000.00 13.00 75.00

A stainless steel lateral restraint system installed externally. Providesstructural restraint and movement prevention to damaged walls by tyingmasonry leaves back to floor joists, ceiling joists or roof structure. Requires installation tools B, D, E.

CODE TYPE per/1

BM129 WPI Windpost POABM130 WP2 Windpost POABM131 WP3 Windpost POABM132 SPN Windpost ties POABM133 SDN Windpost ties POABM134 SNS Windpost ties POABM135 PNS Windpost POA


BM136 SAH-F 340 min POABM137 SAH-T 340 min POABM138 SAH-U 340 min POABM139 SAH-UF 340 min POABM140 SAH-UT 340 min POABM141 SAH-UC 340 min POAAnchor tiesBM142 SIS POABM143 SPI POA

Remedial Timber Frame Wall Ties Windposts

Sliding Anchors

TYPE 8

Remedial Steelwork Wall Ties

TYPE 9

Crack Stitching Ties

TYPE 10

Lateral Restraint Ties

For full details of all available masonry and stonework fixings and support systems,contact our sales office. Technical support and detailed literature available on allproducts, manufacturing service option for specialists requirements.

Exampleapplication.

TYPE 11.Guide tool POA.

Rear

Front

BU

ILD

ING

MET

ALW

OR

K


137


SECTION

17A comprehensive range of joist hangers andtimber connectors designed for constructionprofessionals. Technical details available forall products including nailing specificationsand load calculations on request.

JOIST JOISTCODE WIDTH HEIGHT per/1

BM144 38.00 100.00 3.79BM145 38.00 125.00 4.04BM146 38.00 150.00 3.96BM147 38.00 175.00 3.99BM148 38.00 200.00 4.21BM149 38.00 225.00 4.43BM150 38.00 250.00 4.98BM151 38.00 300.00 9.35BM152 44.00 100.00 3.79BM153 44.00 125.00 4.04BM154 44.00 150.00 3.96BM155 44.00 175.00 3.99BM156 44.00 200.00 4.21BM157 44.00 225.00 4.43BM158 44.00 250.00 4.98BM159 44.00 300.00 9.35BM160 50.00 100.00 3.79BM161 50.00 125.00 4.04BM162 50.00 150.00 3.96BM163 50.00 175.00 3.99BM164 50.00 200.00 5.21BM165 50.00 225.00 5.43BM166 50.00 250.00 5.98BM167 50.00 300.00 9.35BM168 63.00 100.00 5.49BM169 63.00 125.00 5.69BM170 63.00 150.00 6.01BM171 63.00 175.00 6.01BM172 63.00 200.00 6.28BM173 63.00 225.00 6.56BM174 63.00 250.00 7.59BM175 63.00 300.00 10.89BM176 75.00 100.00 5.49BM177 75.00 125.00 5.69BM178 75.00 150.00 6.01BM179 75.00 175.00 6.01BM180 75.00 200.00 6.28BM181 75.00 225.00 6.56BM182 75.00 250.00 6.59BM183 75.00 300.00 9.89BM184 100.00 100.00 7.28BM185 100.00 125.00 7.42BM186 100.00 150.00 7.95BM187 100.00 175.00 7.96BM188 100.00 200.00 7.98BM189 100.00 225.00 8.15BM190 100.00 250.00 9.07BM191 100.00 300.00 11.20BM192 125.00 150.00 9.80BM193 125.00 175.00 10.00BM194 125.00 200.00 10.14BM195 125.00 225.00 10.36BM196 125.00 250.00 10.50BM197 150.00 150.00 11.14BM198 150.00 175.00 11.43BM199 150.00 200.00 11.57BM200 150.00 225.00 11.85BM201 150.00 250.00 12.25BM202 200.00 150.00 26.52BM203 200.00 200.00 27.57BM204 200.00 225.00 30.87BM205 200.00 250.00 34.35

Masonry Joist Hangers


Hanger Shoes

BM206 38.00 100-150 2.94BM207 38.00 175-225 3.33BM208 50.00 100-150 2.94BM209 50.00 175-225 3.85BM210 63.00 100-150 4.79BM211 63.00 175-225 5.15BM212 75.00 100-150 4.79BM213 75.00 175-225 5.88

Build-in Backplate

BM214 3.56

Face-fix Backplate

BM215 up to 50mm 3.16BM216 up to 75mm 4.36

The new Hi-load joist hanger system featuresa unique 2 part design. The shoe adjusts in225mm increments relative to the back plateto give on site adjustability. Build-in or facefix backplates cover all installationapplications. Choice of 3 vertical shoepositions for build-in and 2 positions for facefix backplates.


BM217 38.00 270.00 1.64BM218 44.00 270.00 1.64BM219 50.00 270.00 1.64BM220 63.00 270.00 1.92BM221 75.00 270.00 2.11BM222 100.00 270.00 2.40BM223 38.00 450.00 4.78BM224 44.00 450.00 4.78BM225 50.00 450.00 4.78BM226 63.00 450.00 4.98BM227 75.00 450.00 4.98BM228 100.00 450.00 5.12BM229 125.00 450.00 5.28BM230 150.00 450.00 5.28

High quality one piece galvanised joist hangers for timber to timber fixingof joist and constructional timbers.BM217 – 222: 0.9mm mild steel.BM223 – 230: 1.5mm.BM TRADA Q mark certificated.

Hi-Load Joist Hangers

Timber/Timber Joist Hangers

Return configuration. Straddle configuration.

Typical installation detail.

One piece non weldedjoist hangers forsupporting timber joists& beams from masonrywalls.

2.5 or 3.0mm steelthicknessgalvanised z600 finish

BS10142 manufactured.

3 course of fully curedblock or 675mmalternative masonry mustbe constructed abovehanger prior to loading.

Full technicalspecification available onrequest.

For return or straddle configuration add r or sto end of code. Priced onapplication, contactsales office for details.

Typical installation detail.

Speed prongs.

Double shearnailing.

TIMBERCODE WIDTH per/1

BM246 38.00 1.38BM247 44.00 1.38BM248 50.00 1.38

Attaches trusses, girders and rafters towallplates to provide wind restraint.Speed prongs for fast positioning priorto full nailing.

Manufactured from 0.9mm galvanisedmild steel.

CODE WIDTH per/1

BM249 90.00 11.68

Allows lateral movement of up to30mm during installation of roofingtimbers whilst maintaining upliftresistance. Adjustable to suit differingwallplate widths.


CODE WIDTH per/1

BM250 90.00 2.78

Provides excellent uplift resistance andload transfer for limited bearingconditions when installing trusses ortimber girders.


BU

ILD

ING

MET

ALW

OR

K


138


SECTION

17


BM236 38.00 175-225.00 5.20BM237 50.00 175-225.00 5.20BM238 63.00 175-225.00 5.20BM239 75.00 175-225.00 5.20BM240 100.00 150-225.00 5.20BM241 125.00 200-225.00 5.38BM242 150.00 175-200.00 6.05

Heavy duty face fix hanger for applications requiring additional strengthand safety factors.Bolt and/or nail fix.Manufactured from 2.0mm galvanised mild steel.BM TRADA Q mark certificated.

TIMBERCODE WIDTH per/1

BM243 38.00 1.44BM244 44.00 1.44BM245 50.00 1.44

Precision formed for fast installation andmaximum loads. Speed prongs provideinstant location of the hanger onto thecarrying beam and secures the joist intothe hanger.Manufactured from 1.0mm galvanised mildsteel.BM TRADA Q mark certificated.

Heavy Duty U Hangers

RAFTERCODE WIDTH per/1

BM251 40.00 2.44

A quality engineered site adjustablerafter to ridge connector. Interlockprovides correct nailing positions andautomatic rafter alignment.Manufactured from 1.2mm galvanisedmild steel.

Ridge Rafter ConnectorSpeed Hangers

Truss Clips

Scissor Truss Clips

Truss Bearing Connector

Timber/Timber Truss HangersJOIST JOISTCODE WIDTH HEIGHT per/1

BM231 38.00 250.00 2.98BM232 44.00 250.00 2.98BM233 50.00 250.00 2.98BM234 75.00 250.00 4.36BM235 100.00 250.00 4.84

Galvanised truss shoe providing greatersupport for joists and trussconnections. Adjustable legs to suitdiffering lower chords.Manufactured from 1.2mm mild steel.BM TRADA Q mark certificated.

Nailing specification and S.W.L detailson request.

RAFTER RIDGECODE WIDTH HEIGHT per/1

BM252 40.00 38-45.00 9.26BM253 46.00 38-45.00 9.26

Site adjustable connector for right and left45 degree skewed rafters. Face flangesshould be bent back flush with ridge forend of ridge applications.

Manufactured from 1.5mm galvanised mildsteel.

RAFTERCODE WIDTH per/1

BM254 40.00 3.87

Provides a secure connection forrafters or trusses to timber wallplatesat 45 degree angles. Install on theinside and outside of the wallplate todouble loading capacity.

Manufactured from 1.2mmgalvanised mild steel.

CODE HEIGHT per/1

BM255 114.00 1.86

A general purpose site adjusted connector foruse in reinforcing a wide variety of timberconnections. Slotted for instant, accuratebending.


CODE HEIGHT per/1

BM256 85.00 1.88BM257 125.00 2.89

Designed to connect framing timbersat irregular angles from 0-135degrees. Staggered nail pattern toreduce splitting and allow fixing onboth sides of the member.

Manufactured from 1.2mm galvanisedmild steel. B

UIL

DIN

G M

ETALW

OR

K


139


SECTION

17CODE HEIGHT per/1

BM258 92.00 1.46

A versatile connector for connection oftrusses or rafters likely to be subject tohigh wind pressures, also for generalpurpose connection of structuraltimbers.These ties are handed and sold in pairsonly.


CODE HEIGHT LENGTH per/1

BM259 30 x 2.5mm 300 1.44BM260 30 x 2.5mm 400 1.74BM261 30 x 2.5mm 500 1.70BM262 30 x 2.5mm 600 2.04BM263 30 x 2.5mm 700 2.34BM264 30 x 2.5mm 800 2.56BM265 30 x 2.5mm 900 2.86BM266 30 x 2.5mm 1000 3.20BM267 30 x 2.5mm 1100 3.42BM268 30 x 2.5mm 1200 3.78BM269 30 x 2.5mm 1300 4.06BM270 30 x 2.5mm 1400 4.34BM271 30 x 2.5mm 1500 4.64BM272 30 x 2.5mm 1600 4.94BM273 30 x 2.5mm 1700 5.22BM274 30 x 2.5mm 1800 5.50BM275 30 x 2.5mm 1900 5.80BM276 30 x 2.5mm 2000 6.20BM277 30 x 5mm 300 1.68BM278 30 x 5mm 400 2.00BM279 30 x 5mm 500 1.98BM280 30 x 5mm 600 2.35BM281 30 x 5mm 700 2.68BM282 30 x 5mm 800 3.02BM283 30 x 5mm 900 3.02BM284 30 x 5mm 1000 3.34BM285 30 x 5mm 1100 3.69BM286 30 x 5mm 1200 3.98BM287 30 x 5mm 1300 4.36BM288 30 x 5mm 1400 4.68BM289 30 x 5mm 1500 4.95BM290 30 x 5mm 1600 5.29BM291 30 x 5mm 1700 5.69BM292 30 x 5mm 1800 6.02BM293 30 x 5mm 1900 6.36BM294 30 x 5mm 2000 6.70

BM295 Stainless steel POA

High Wind Ties

Restraint Straps

Hip Ridge Rafter Connector

HIP Corner Plate Connector

Framing Anchor

Skew Anchors

Light gauge 2.5mm restraintsor heavy gauge 5mm strapsfor lateral restraint of roof,floor and structural members.

Finish: Pre-galvanised andedge coated.

Manufactured to BS 5268 part 3.

Typical applications.

With fast lead times custom restraints are available to order, bent,twisted and cut in any combination in galvanised mild steel or stainlesssteel, contact with your specification and requirements.


BM298 41.00 152.00 1.08BM299 41.00 381.00 2.03BM300 72.00 152.00 1.80BM301 83.00 203.00 2.03BM302 83.00 254.00 2.75BM303 83.00 305.00 2.93BM304 83.00 508.00 4.91BM305 103.00 152.00 2.30BM306 103.00 203.00 3.02BM307 103.00 254.00 3.78BM308 103.00 305.00 4.64BM309 103.00 508.00 7.52BM310 144.00 203.00 3.60BM311 144.00 254.00 4.41BM312 144.00 305.00 5.40BM313 144.00 406.00 7.11BM314 206.00 356.00 7.70

CODE TYPE SIZE per/1

BM315 Single side M12x50 1.56BM316 Double side M12x50 1.58

Single sided and double sidedconnector plates for enhanced boltperformance and significant reductionin joint movement in timber.

Manufactured from 1.0mm galvanisedmild steel. Available to suit 16 &20mm bolts – POA.

BU

ILD

ING

MET

ALW

OR

K


140


SECTION

17

CODE SIZE per/100

BM321 25 x 25.00 18.88BM322 50 x 50.00 22.10BM323 75 x 75.00 29.66

90 degree general purpose bracketsgalvanised finish.

CODE SIZE WIDTH per/1

BM324 70 x 45.00 65.00 2.85BM325 90 x 90.00 65.00 3.78BM326 90 x 150.00 65.00 4.66BM327 150 x 150.00 65.00 5.40

Heavy angles for connection oftimber at 90 degrees.Reinforcement ribs for connectionrigidity. Manufactured from 1.5 and2.5mm galvanised mild steel.

Angle Brackets

Heavy Duty Angle Brackets

Stair Tread BracketsCODE LENGTH per/1

BM320 210.00 5.08

Heavy duty angled brackets for use instructurally sound staircase framingwithout the need for notched ormachined joints.Fixing to be carried out using hexhead coach screws relevant to timbersize.


CODE JOIST HEIGHT SPACING per/1

BM317 150-225.00 400.00 1.88BM318 150-225.00 450.00 1.94BM319 150-225.00 600.00 2.22

Fast alternative to timber floorstrutting, conforms to bracingrequirements for long span timberfloors. Manufactured from 1.0mmgalvanised mild steel.

Herringbone Struts

Timber Connectors

CP Joining Plates

Timber fastening nail plates forgeneral splicing and reinforcing ofstructural joints.


Splice Plates

Sole Plate Anchors


BM297 79.00 228.00 2.72

A nail on flanged tie plate forreinforcement of butt joint connectionof timber members.3.5mm nail holes.



BM296 37.00 191.00 2.26

Attaches timber sole plates toconcrete and masonry foundations.


construction fixings catalogue

Documents