construction manual appendix – screw table rivet 73 as 4-3 aluminium weathersea l fixing corner...

CONSTRUCTION MANUAL Appendix – Screw Table

Document Reference: F10 11 Construction Manual Screw Table Ver 8.1.docx of 22

ID # Desc Photo Used for Type

6.390 6-18x25 Bugle Head Needle Point

Fixing plasterboard to light gauge ceiling battens

Class 2

6.390 6-18x25 Bugle Head Tek

Fixing plasterboard to heavy gauge battens or wall panels

Class 2

6.410 6-18x45 Bugle Head Tek

Fixing double layers of plasterboard to heavy gauge battens or wall panels

Class 2




6.420.5 M5-18x20 Bugle Fibrezip

Fixing metal corner caps to panels, internal and external Replaces 6-20x30 CSK TEK

Class 3

6.430 6-20x50 CSK Rib WINGTEK

Fixing timber skirting, timber eaves batten, door architraves to wall panels, timber window and door reveals to wall panels.

Class 3

6.440.5

M5-18x20 CSK Rib Fibrezip

Fixing hardiflex sheeting to eaves

Class 3




Replaces 8-18x20 CSK TEK

6.470 12-11x25 Hex T17 Bare

Fixing baseboard brackets to timber handrails, Roof apron flashings to wall panels Replaces 8-15x30 SEH Rib TEK T17

Class 3

6.490 10-24x16 Wafer Head Tek

Fixing joists to bearers, weatherboard clips, gable end angle, bearer intersection, hip end bottom chords, Wall – floor flashings, Heavy gauge floor C joists.

Class 3




Replaces 10-16x16 Wafer head TEK

6.500 10-16x45 CSK WINGTEK

Fixing particleboard & fibre cement floor sheet, fixing timber decking to joists and bearers.

Class 3

6.510 8-18x25 SEH Ext-point Tek

Fixing aluminium windows and aluminium reveals to panels

Class 2




6.520 10-16x75 CSK WINGTEK

Fixing external door jambs to panels

Class 3

6.530 10-16x16 HEX TEK Bare

Panel alignment brackets, structural corner tie brackets, top hat ceiling battens, fixing floor nogs to joists, fascia and barge brackets to trusses and rafters.

Class 3




6.540 12-14x30 HEX TEK Bare

Fixing window and doors to adjoining panels thru packer holes.

Class 3

6.550 12-24x32 Series 500 HEX TEK

Fixing RHS beams to U post bracket, mid panel junctions, bearer junction angles, mega anchors.

Class 3

6.560.5

14-10x25 HEX TEK Bare

Fixing purlins, binders, gable end purlins, roof bracing, trusses assembly, jack rafters, gable end angle.

Class 4




6.570 14-10x50 HEX T17 Bare

Fixing wall panel brackets to timber floor sheeting when not on bearer.

Class 3

6.580 14-10x75 T17 Bugle batten

Fixing timber handrails to timber posts

Class 3

6.590 12-10x50 HEX TEK Vortex, Neo washer

Fixing roof sheet to purlins, corrugated & rib profile, flashing to purlins (ridge capping, barge flashing, apron flashing).

Class 4




6.605 14-10x50 HEX TEK Cyclone assembly (Bremick)

Fixing roof sheet to purlins, corrugated & rib profile in high wind areas, colour matched to roof sheeting.

Class 4

6.610 RIVET 73 AS 4-3 Aluminium weatherseal

Fixing corner soakers, fascia, barge, gutter, ridge capping apron flashing, slab, floor flashing, wet area angle flashings

Aluminium




6.630 M10x25 HEX Head Bolt

Wall tee bracket, lintel bearer plates, portal frames to panels, PFC to bearer above, double layer bearers.

Zinc plated

6.630 + 6.700

M10x25 HEX Head Bolt complete with M10 Flanged nut

Wall tee bracket, lintel bearer plates, portal frames to panels, PFC to bearer above, double layer bearers.

Zinc plated




6.640 M10x50 HEX Head Bolt

Wall floor brackets to bearer floor system, fixing wall panel brackets to compressed floor sheeting.

Zinc plated

6.640 + 6.700

M10x50 HEX Head Bolt complete with M10 Flanged nut

Wall floor brackets to bearer floor system, fixing wall panel brackets to compressed floor sheeting.

Zinc plated




6.650 M10x50 Cuphead bolt & nut Galvanised

Newell post bracket to bearer, portals to panels.

Galvanised


Newell posts brackets to timber step treads

Galvanised




6.665 M12x70 HT HEX Head bolt & nut Galvanised

Mega anchors Galvanised


Timber step treads to steel stringers

Galvanised

6.680 M10x80 Button Head

Fixing step stringers to floor system





Fixing timber newell posts to newell post bracket

Galvanised

6.700 M10 Flanged nuts

To top of stumps, columns, 4 hole plate, RHS beam to bearer above, to M10x25 bolts, M10x50 bolts, M10x80 bolts

Class 2




6.710 M10 Washer Galvanised

To various M10 Galvanised bolts.

Galvanised


Bracing angle to foundation stumps.

Galvanised





Portal –PFC beam to truss above.

Galvanised


Column to timber beam.

Galvanised


Connecting trusses or rafters to 125mm RHS beams

Galvanised





Post to 200 PFC

Galvanised


Connecting trusses or rafters to 150mm RHS beams, post to 250 PFC

Galvanised

6.785 M12 Washer Galvanised

Galvanised bolts

Galvanised




6.790 Threaded Rod M12x120

Panel brackets to concrete slab, columns to slab, lintel bearer plate to top of double joinery panels.

Zinc

6.800 M12 Flanged nut

Various M12 bolts and threaded rods.

Class 2




6.805 M12 Nylock nuts

Various M12 bolts and threaded rods.

Class 2

6.810 Chemical Stud M20x260 Galvanised, complete with nut & washer

Portal legs to concrete slab

Galvanised




6.820 Threaded Rod M12x220

Joinery panels tops to trusses, columns to trusses.

Class 2

6.850 M16x120 HT Hex head bolt, nut and washer

M16 cross bracing to stump, RHS spreader between stumps.

Galvanised




6.870 M20x65 HT HEX Head bolt, nut and washer, Galvanised

Joining portal legs to beams.

Galvanised




6.872 M16x40 HT HEX Head bolt, nut and washer, Galvanised

Joining portal legs to beams.

Galvanised

6.890 Roof Bracing 30m-25mmx0.8mm

Fixed to top chord of roof trusses feed under roof purlins, as indicated on roof plan.




6.380 Drill – Tek bit pack

No 2 Phillips head double ended tek bit 5/16” Hex Tek bit 3/8” Hex Tek bit

6.830 M16x40 KWIKSPAN BOLT & NUT

Bolting panels together

Zinc plated

construction manual appendix – screw table rivet 73 as 4-3 aluminium weathersea l fixing corner...

Documents