construction standards used - hku librariesebook.lib.hku.hk/hkg/b35843020.pdf · construction...

CONSTRUCTION STANDARDS USED

in

HONG KONG

(DECEMBER 1998)

^;f;:p,.J,BOOKS REGISTRATION ORDINANCE

Chapter 142

No.: HK tilCOMPILED BY

CONSTRUCTION STANDARDS COMMITTEE OFTHE CONSTRUCTION ADVISORY BOARD

WORKS BUREAU

j BIB. REG. HO.1 DATE REC'D1 CLASS HO. I-:| AUTHOR TO.

_-.l MAY 1899.- j

C '•'• j

Copyright© bythe Government of the Hong Kong Special Administrative Region

Third edition, December 1998

Compiled by:Construction Standards Committee of

the Construction Advisory Board

Works Bureau

CONTENTS

Page

Introduction iv

Notes to Readers v

Abbreviations vi - viii

Group and Subgroup Index ix - x

Construction Standards used in Hong Kong 1 -197

Appendix I : Terms of Reference of the Construction Standards Committee 198

Appendix II: Membership of the Construction Standards Committee 199

Appendix in : Readers' Suggestion Form 200

-in-

Introduction

The compilation of construction standards used in Hong Kong was first published inJune 1993 by the Construction Standards Committee. In August 1994, it became one of theworking committees under the Construction Advisory Board which is to keep under reviewand to advise the Government through the Secretary for Works on construction industry issues.The Terms of Reference and Membership of the Committee are at Appendix I and Appendix IIrespectively. The Committee published the second edition in July 1996.

This third edition (December 1998) expanded the collection by includingconstruction standards used in the major quasi-government organisations and public utilitycompanies such as the Airport Authority Hong Kong, Mass Transit Railway Corporation,Hong Kong and China Gas Company Limited, Hong Kong Electric Company Limited andHong Kong Telecommunications Limited. This edition also improved the classificationsystem of the standards contained in the collection so as to provide more information about thetype of standards.

This edition will be available on Internet through the Works Bureau Homepage athttp://www.wb.gov.hk.

-IV-

Notes to Readers

L The contents in this collection are for reference only and subject to changes from time to time. Readers should makereference to the latest catalogues published by the relevant standard organisations for accurate descriptions of the standards,their status, and any subsequent amendments or supplements. Readers should also approach the relevant governmentdepartments and organisations regarding which versions or parts of the standards are being used by them.

2. Readers are invited to make suggestions for future improvement in this collection to members of the Construction StandardsCommittee using the Form at Appendix III. This collection will be periodically reviewed by the Construction StandardsCommittee and new editions will be issued thereafter.

3. The construction standards are arranged under the relevant 'Group' and 'Subgroup' of works fields and are listed inalphabetical order. They are further arranged in ascending order in the 'Number' and 'Year' columns. The index for"Group" and "Subgroup" is shown on pages ix and x.

4. In the 'Year' column, an additional year with brackets means that in that year the standard has been reviewed and confirmedstill relevant. The year of a standard is not shown in the 'Year' column if such standard contains a number of parts whichhave been issued at difference years. Readers are requested to make reference to the catalogues published by the relevantstandard organisations.

5. In the "Type" column, standards are broadly classified into two major categories: Technical Regulations (TR) compliancewith which are mandatory; and Standards compliance with which are voluntary. Standards are further classified into fivesub-categories: Products Standards (PDS), Process Standards (PSS), Services Standards (SS), Testing Standards (TS) andOther Standards (OS).

-v-

Abbreviations

The following abbreviations are used for

a) USER ORGANISATIONS

A Architectural Services DepartmentAAHK Airport Authority Hong KongB Buildings DepartmentC Civil Engineering DepartmentD Drainage Services DepartmentEm Electrical and Mechanical Services DepartmentEp Environmental Protection DepartmentH Housing Department

HEC Hong Kong Electric Company LimitedHKCG Hong Kong and China Gas Company LimitedHKT Hong Kong Telecommunications LimitedHy Highways DepartmentMTRC Mass Transit Railway CorporationT Territory Development DepartmentW Water Supplies Department

b) Elsewhere -

AAMAAASHTOANSIAOACAPHAAPIAPLEASASCEASDASHRAEASMEASTMAWWA

American Architectural Manufacturers AssociationAmerican Association of State Highway and Transportation OfficialsAmerican National Standards InstituteAssociation of Official Analytical ChemistsAmerican Public Health AssociationAmerican Petroleum InstituteAssociation of Public Lighting EngineersAustralian StandardAmerican Society of Civil EngineersArchitectural Services Department, Government of HKSARAmerican Society of Heating, Refiigerating and Air-conditioning Engineers, Inc.American Society of Mechanical EngineersAmerican Society for Testing and MaterialsAmerican Water Works Association

-VI-

BABDBREBSBSENCAP XXXCEDCFRCIBSECIRIACISCACLPCPCS 1&2CS4(HSE)DINDOTDSDDWEMSDENEPDFAA-ACFOCFSDGEOGSCEWGUHKCG/SER/OPXHKIEHKQAAHKSARHOIHS(G)

Building Authority, HKSARBuildings Department, Government of HKSARBuilding Research Establishment, UKBritish StandardBritish Version of European StandardLaws of Hong Kong Chapter XXXCivil Engineering Department, Government of HKSARCode of Federal Regulation (Department of Transportation, USA)The Chartered Institution of Building Services EngineersConstruction Industry Research and Information AssociationCeilings and Interior Systems Construction AssociationChina Light & Power Co. Ltd.Code of PracticeConstruction Standard - Testing Concrete & Reinforcement, Government of HKSARChemical Safety 4 (Health & Safety Executive, UK)German Industry StandardBritish Departmental Standard, Department of TransportDrainage Services Department, Government of HKSARCoding standards for air ductwork by the Heating and Ventilating Contractors' AssociationElectrical and Mechanical Services Department, Government of HKSAREuropean StandardEnvironmental Protection Department, Government of HKSARFederal Aviation Administration - Advisory Circular (USA)Fire Officers' CommitteeFire Services Department, Government of HKSARGeotechnical Engineering Office, Government of HKSARGeneral Specification for Civil Engineering Works, Government of HKSARGas Utilisation Guidance Notes, EMSDHong Kong & China Gas Co. Ltd./Services/Operation Procedure XHong Kong Institution of EngineersHong Kong Quality Assurance AgencyHong Kong Special Administrative RegionHighways Office Instruction, Government of HKSARHealth & Safety Executive, UK (Guidelines)

-vn~

HyDHyDTCICAOIECIGEIPISOISRMLPCLPGAMS-2NFPAOSHAPDPNRD/GNRNSILTECHSISSMMBWSMMCEWSSPCTDDTPDMUICUKRRLULWBWBTCWHOWSD

Highways Department, Government of HKSARHighways Department Technical CircularInternational Civil Aviation OrganisationInternational Electrotechnical CommissionInstitution of Gas Engineers, UKInstitute of PetroleumInternational Organisation for StandardisationInternational Society for Rock MechanicsLoss Prevention Council, UKLiquefied Petroleum Gas Industry Technical AssociationManual Series No. 2 (Asphalt Institute, USA)National Fire Protection AssociationOccupational Safety and Health AdministrationBritish Standards Institution Published DocumentPractice NoteGuidance Note issued by Research and Development Division, Highways DepartmentHighways Department Road NoteThe Standing Inter-Departmental technical Group on Landscape Design, Implementation and MaintenanceSwedish StandardStandard Method of Measurement for Building Works, Government of HKSARStandard Method of Measurement for Civil Engineering Works, Government of HKSARSteel Structures Painting CouncilTerritory Development Department, Government of HKSARTransport Planning and Design Manual published by Transport Department, Government of HKSARInternational Union of RailwaysUnited Kingdom Road Research Laboratory (now TRL)Underwriter Laboratory, USAWorks Bureau, Government of HKSARWorks Bureau Technical CircularWorld Health OrganisationWater Supplies Department, Government of HKSAR

-vm~

Group and Subgroup Index

GROUP

AIRPORTS

BUILDINGSERVICES

BUILDINGS

SUBGROUP GROUP

Aircraft Bridges BUILDINGSAircraft Pavement (Cont'd)Airfield ConfigurationMiscellaneous DRAINAGE

SERVICESAir-conditioningEnergy EfficiencyFire Services ELECTRICAL &Heating & Ventilation MECHANICALLifting AppliancesLifts & EscalatorsLighting & PowerSecurity SystemSound SystemTelecommunication

Access for DisabledChimney & FireplacesCladding/TilesCurtain Walls/GlazingDoors & WindowsInsulating MaterialsMeans of EscapeMiscellaneousPartition, Ceiling, Wall &

WallPlumbingRoofs

SUBGROUP

Sound InsulationThermal Insulation

OutfallSewerageDrainage

ConveyorsEarthing InstallationsFixed Electrical

InstallationsFuel DispensingEquipmentGatesLaundry MachineryLuminairesMiscellaneousMotorised Drives &MachineryOil Burning EquipmentPressure VesselsSubstationSwitchgearTransformersUPS & Emergency

GeneratorsValves & PumpsWiring & Cables

GROUP SUBGROUP

ENVIRONMENT AirEffluentEnergyGeneralNoiseWaste

FOUNDATIONS GeneralPilingRetaining Walls

GAS SUPPLY GeneralFuel gas InstallationsFlueing & VentilationPipeline

GEOTECHNICAL & BlastingEARTHWORKS Cavern Works

Earth Retaining WallExcavation and Site

FormationGeotechnical WorksGround Investigation

-IX-

Construction Standards Used in Hong Kong (December 1998)

GROUP SUBGROUP NUMBER YEAR TITLE USERORGANISATION

TYPE

AIRPORTS

AIRPORTS

AIRPORTS

AIRPORTS

AIRPORTS

AIRPORTS

AIRPORTS

AIRPORTS

AIRPORTS

AIRPORTS

AIRPORTS

AIRPORTS

AIRPORTS

AIRPORTS

AIRPORTS

AIRPORTS

AIRPORTS

AIRPORTS

AIRPORTS

AIRPORTS

AIRPORTS

Aircraft Bridge

Aircraft Bridge

Aircraft Bridge

Aircraft Bridge

Aircraft Bridge

Aircraft Bridge

Aircraft Bridge

Aircraft Pavement

Aircraft Pavement

Aircraft Pavement

Airfield Configuration



Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

BS2618

BS 5400: Part 1

BS 5400: Part 3

BS 5400: Part 4

BS 5400: Part 5

BS 5400: Part 9

NFPA417

BS 7533: Part 3

FAA-AC150/5320-6C

ICAO

ICAO

ICAO

ICAO

BS 3224

BS4G173

BS4G 173: Parti

BS4G173:Part2

BS 7867

CAP 301

CAP 301

CAP 301

1975(1990)

1988

1982

1990

1979

1983

1990

1997

1978

1997

1997

1996

1997

1985

1985

1997

Specification for electric traction equipment

Steel, concrete and composite bridges - general statement

Code of practice for design of steel bridges

Code of practice for design of concrete bridges

Code of practice for design of composite bridges

Bridge bearings

Aircraft loading walkways

Pavement constructed with clay, natural stone or concrete pavers- Code of practice for laying precast concrete paving blocks andclay pavers for flexible pavements

Advisory circular - airport pavement design and evaluation

Aerodrome design manual - Part 3: pavement

Aerodrome design manual - Part 2: taxi ways, aprons and holdingbays

Aerodrome design manual - Part 1: runway

Aerodrome design manual - Annex 14: international standardsand recommended practice aerodromes

Lighting fittings for civil land aerodromes

Connectors for ground electrical supplies for aircraft

Specification for design, performance and test requirements

Specification for dimensions

Specification for portable fire extinguishers for use in aircraft

Hong Kong Airport (Control of Obstructions) Ordinance

Hong Kong Airport (Control of Obstructions) (Consolidation)Order

Hong Kong Airport (Control of Obstructions) (Lighting)(Consolidation) Order

AAHK

A,B,C,Em,Hy

A,B,C,Em,Hy

A,B,C,Em,Hy

A,B,C,Em,Hy

A,B,C,Em,Hy

AAHK

AAHK

PDS

OS

PSS

PSS

PSS

PDS

PDS

PSS

A,Em,Hy PSS

A,Em,Hy

A, Em

A,Em

A,Em

AAHK

AAHK

AAHK

AAHK

A

PSS

PSS

PSS

PSS

PDS

PDS

PSS

PDS

PDS

TR

TR

TR

- 1 -



TYPE

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

Air-conditioning

Air-conditioning

Air-conditioning

Air-conditioning

Air-conditioning

Air-conditioning

Air-conditioning

Air-conditioning

Air-conditioning

Air-conditioning

Air-conditioning

Air-conditioning

Air-conditioning

Air-conditioning

ASD

BS 3790

BS 3928

BS 4434

BS4718

BS 4856:

BS 4857:

BS 4857:

BS 4954:

BS 4954:

BS 4979

BS 5422

BS5491

BS 6540

Part 5

Parti

Part 2

Parti

Part 2

1997

1995

1969

1995

1971

1979

1972(1983)

1978(1983)

1973(1987)

1978(1987)

1986

1990

1977(1986)

1985

General specification for air-conditioning, refrigeration,ventilation and central monitoring and control systeminstallation in Government Building H.K.

Specification for endless wedge belt drives and endless V-beltdrives

Method for sodium flame test for air filters (other than for airsupply to I.C. engines and compressors)

Specification for safety and environmental aspects in the design,construction and installation of refrigerating appliances andsystems

Methods of test for silencers for air distribution systems

Methods for testing and rating fan coil units, unit heaters and unitcoolers - acoustic performance; with ducting

Methods for testing and rating terminal reheat units for airdistribution systems - thermal and aerodynamic performance

Methods for testing and rating terminal reheat units for airdistribution systems - acoustic testing and rating

Methods for testing and rating induction units for air distributionsystems - thermal and aerodynamic performance

Methods for testing and rating induction units for air distributionsystems - acoustic testing and rating

Methods for aerodynamic testing of constant and variable dualduct or single duct boxes, single duct units and induction boxesfor air distribution systems

Method for specifying thermal insulating materials on pipes,ductwork and equipment (in the temperature range -40°C to+700°C)

Specification for rating and testing unit air conditioners of above7kW cooling capacity

Air filters used in air-conditioning and general ventilation

A,Em,Ep,H,HEC

A,AAHK,Em,H

A,Em,H

A,Em,H,MTRC

AAHK

A,Em,H

A,Em,H

A,Em,H

A,Em,H

A,EmJi

A,Em,RHEC

AJEm,H,HEC

AAHK

A,Ep,H,HEC,MTRC

PDS

PDS

TS

PSS

TS

TS

TS

TS

TS

TS

TS

PDS

TS

PDS

- 2 -



TYPE

BUILDING SERVICES Air-conditioning





BUILDING SERVICES Energy Efficiency










BUILDING SERVICES Fire Services



BS EN 779

CAP 123

CIBSE

EMSD

1993

1986

1998

UL900 1982

ASHRAE114 1986

ASHRAE90.1 1989

BS 8207

BS8211

BS 8211: Parti

CAP 123

CIBSE BuildingEnergy Code: Part1

CIBSE BuildingEnergy Code: Part2a

1985(1995)

1988(1995)

1977

1981

CIBSE Building 1979Energy Code: Part3

CIBSE Building 1982Energy Code: Part4

ANSI/UL 1247

ANSI/UL 555

ASD 1997

PDSPaniculate air filters used for general ventilation. Requirements, A,Em,Ep,Htesting, marking conditioning and general ventilation

Building (Ventilating Systems) Regulations

CIBSE guide volume A1-A10, B1-B18, C1-C7

Code of practice for energy efficiency of air conditioninstallations

Standard for test performance of air filter units

Energy management control systems instrumentation

Energy efficient design for new buildings except low-riseresidential buildings

Code of practice for energy efficiency in buildings

Energy efficiency in housing

Code of practice for energy efficient refurbishment of housing

Building (Energy Efficiency) Regulations

Guidance towards energy conserving design of buildings andservices

Calculation of energy demands and targets for the design of new A,Eni PSSbuildings

Guidance towards energy conserving operation of buildings and A,Em,Ep,H PSSservices

Measurement of energy consumption and comparison with A,Em,Ep TStargets for existing buildings

Diesel engines for driving centrifugal fire pumps HEC PDS

Fire dampers HEC PDS

General specification for fire service installation in government A,Em,H3HEC PDSbuilding, HK

HEC

Em,H

A,Em,H,MTRC

AAHK

A,Em

A,Em,Ep,HEC

A,Em

A,Em

A,Em,Eo.H

TR

OS

PSS

TS

OS

PSS

PSS

PSS

PSS

TR

PSS

-3 -



TYPE

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

Fire Services

Fire Services

Fire Services

Fire Services

Fire Services

Fire Services

Fire Services

Fire Services

Fire Services

Fire Services

Fire Services

Fire Services

Fire Services

Fire Services

Fire Services

Fire Services

Fire Services

Fire Services

Fire Services

Fire Services

Fire Services

ASTME814

BS336

BS 4422

BS 4422: Part 1

BS 4422: Part 3

BS 4422: Part 4

BS 4422: Part 5

BS 5041

BS 5041: Parti

BS 5041: Part 2

BS 5041: Part 3

BS 5041: Part 4

BS 5041: Part 5

BS 5274

BS 5306

BS 5306: Part 0

BS 5306: Part 1

BS 5306: Part 2

BS 5306: Part 3

BS 5306: Part 4

BS 5306: Part 5Section 5.1

1989

1987

1990

1994

1989

1987

1987

1975(1987)

1975(1987)

1974(1987)

1985

1986

1976(1988)

1990

1985

1986

1992

Test Method for Fire Tests of Through-Penetration Fire Stops

Specification for fire hose couplings and ancillary equipment

Glossary of terms associated with fire

General terms and phenomena of fire

Fire detection and alarm

Fire extinguishing equipment

Smoke control

Fire hydrant systems equipment

Specification for landing values for wet risers

Specification for landing values for dry risers

Specification for inlet breechings for dry riser inlets

Specification for boxes for landing values for dry risers

Specification for boxes for foam inlets and dry riser inlets

Specification for fire hose reels (water) for fixed installations

Fire extinguishing installations and equipment on premises

Guide for the selection of installed systems and other fireequipment

Hydrant systems, hose reels and foam inlets

Specification for sprinkler systems

Code of practice for selection, installation and maintenance ofportable fire extinguishers

Specification for carbon dioxide systems

Specification for halon 1301 total Hooding systems

MTRC

A,AAHK,Em,H

A,Em

A,Em

A,Em,HEC

A,Em,HEC

A,Em,HEC

A,Em,HEC,MTRC,W

A,Em,H,HEC,W

A,Em,H,HEC,W

A,Em,H,HEC,W

A,Em,H,HEC,W

A,Em,H,HEC,W

MTRC

A,AAHK,Em,H,HEQMTRC

A,Em,HEC

A,Em,H,HEC

A,AAHK,Em,H,HEC

A,Em,HEC

A,Em,H,HEC

A,Ein,HEC

TS

PDS

OS

OS

PDS

PDS

PSS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PSS

PDS

PDS

PSS

PDS

PDS

-4-



TYPE




BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

Fire Services

Fire Services

Fire Services

Fire Services

Fire Services
















BS 5306: Part 7

BS 5423

BS 5445

BS 5445: Part 1

BS 5445: Part 5

BS 5445: Part 7

BS 5445: Part 8

BS 5445: Part 9

BS 5446

BS 5499: Part 1

BS 5499: Part 2

BS 5499: Part 3

BS 5588: Parti

BS 5588: Part 2

BS 5588: Part 3

BS 5588: Part 4

BS 5588: Part 5

1984(1995)

1988

1989

1988

1987(1995)

1977

1977

1984

1984

1984

1990

1990(1995)

1986(1995)

1990

1990

1985

1983

1978

1991

1984( 1995) Halon 1211 total flooding systems

Specification for low expansion foam systems

Specification for medium and high expansion foam systems

Specification for powder systems

Specification for portable fire extinguishers

Components of automatic fire detection systems

Introduction

Heat sensitive detectors - point detectors containing a staticelement

Specification for point - type smoke detectors using scatteredlight, transmitted light or ionization

Specification for high temperature heat detectors

Methods of test of sensitivity to fire

Components of automatic fire alarm systems for residentialpremises

Specification for fire safety signs

Specification for self-luminous fire safety sign

Specification for internally - illuminated fire safety signs

Fire precautions in the design, construction and use of buildings -code of practice for residential buildings

Code of practice for shops

Code of practice for office buildings

Code of practice for smoke control in protected escape routesusing pressurisation

Code of practice for fire fighting stairs and lifts

A,Em,HEC

A,Em,HEC

A,Em,HEC

A,Em,HEC

H,HEC,MTRC

MTRC,W

A,Em,W

A,Em,H,W

A5AAHK,Em,H,W

A,Em,W

A,Em,W

AsEm

A,AAHK,D,H,HEQT

A,D,Em,H,HEC,T

A,D,H,HEC,T

A,D,HEC,T

A,D,HEC,T

AAHEQT

A,D,Em,HEC»MTRQT

A,D,HEC,T

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

TS

PDS

PDS

PDS

PDS

PSS

PSS

PSS

PSS

PSS

- 5 -



TYPE

















BS 5588: Part 8

BS 5588: Part 9

BS 5839

BS 5839: Part 1

BS 5839: Part 2

BS 5839: Part 3

BS 5839: Part 4

BS 5839: Part 5

BS 5908

BS 6535

BS 6853

BS 7273: Part 1

BS 7273: Part 2

BS 7327: Part 1

BS750

1988

1989

1988

1983

1988

1988

1988

1990

1987

1990

1992

1990(1995)

1984

BS 7863 1996

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

Fire Services

Fire Services

Fire Services

Fire Services

Fire Services

BS EN 25923

BS EN 27201-1

BS EN 27201-2

BSEN3

BS EN 54-1

1994

1994

1994

1996

Code of practice for means of escape for disabled people

Code of practice for ventilation and air conditioning ductwork

Fire detection and alarm systems for buildings

Code of practice for system design, installation and servicing

Specification for manual call points

Specification for automatic release mechanisms for certain fireprotection equipment

Specification for control and indicating equipment

Specification for optical beam smoke detectors

Code of practice for fire precautions in the chemical and alliedindustries

Fire extinguishing media

Code of practice for fire precautions in the design andconstruction of railway passenger rolling stock

Electrical actuation of gaseous total flooding extinguishingsystems

Mechanical actuation of gaseous total flooding an localapplication extinguishing system

Specification for small fixed halon fire extinguishers

Specification for underground fire hydrants and surface boxframes and covers

Recommendations for colour coding to indicate theextinguishing media contained in portable fire extinguishers

Carbon dioxide

Specification for halon 1211 and halon 1301

Code of practice for safe handling and transfer procedures

Portable fire extinguishers

Fire detection and fire alarm systems - Introduction

A,D,HEC,T PSS

A,D,Ep,Em,HEC,T PSS

A,Em,HEC,MTRC,W

A,Em,HEC,W

A,Em,HEC,W

A,Em,HEC

A,Em,H,HEC

A,Ern,HEC

A,Em

A,Em

AAHK

A,Em

A,Em

PDS

PSS

PDS

PDS

PDS

PDS

PSS

PDS

PSS

PDS

PDS

A,Em PDS

A,AAHK,C,D,Em,H PDS,HEC,Hy,T,W

A, Em

A,Em

A,Em,MTRC

A, Em

A,Em

A, Em

OS

PDS

PDS

PSS

PDS

PDS

-6-



TYPE




BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

Fire Services

Fire Services

Fire Services

Fire Services

Fire Services

Fire Services












BSEN615 1995 Fire protection. Fire extinguishing media. Specifications for A,Em

powders (other than class D powders)

BS EN 671 -1 1995 Hose reels with semi-rigid hose

CAP 59 Factories and Industrial Undertakings (Fire Precautions in

Noticeable Workplaces) Regulations

CAP 95 Fire Service (Installation and Equipment) Regulators

CAP 95 Fire Service (Installation Contractors) Regulators

CAP 95 Fire Service Department (Reports and Certifications) Regulators

CAP 95 Fire Services Ordinance

FOC Rules for automatic sprinkler installations

FOC 1985 Rules for automatic fire alarm installations for the protection ofproperty

FSD 1994 Code of practice for minimum fire services installation andequipment

FSD 1996 Code of Practice for the Provision of Means of Escape in case ofFire

FSD 1994 Code of Practice for Minimum Fire Service Installations andEquipment and Inspection and Testing of Installation andEquipment

FSD List of portable fire fighting equipment

IP 1993 Model code of safe practice for the petroleum industry: Part 19 -Fire precautions at petroleum refineries and bulk storageinstallations

LPC Rules for automatic sprinkler installations, United Kingdom

NFPA National fire codes

NFPA 1991 National fire protection association (NFPA) Code 12A & 12B

requirement

NFPA 15 Water spray fixed systems for fire protection

NFPA 2001 Clean agent fire extinguishing systems

NFPA 30 Flammable and combustible liquids code

PDS

A,Em

A,Em

A,Em,H,HEC,MTRC

A,B,Em

HEC

AAHK,HEC

HEC

HEC

A,Em

A,Em,HEC5MTRC

HEQMTRC

HEC

HEC

HEC

PDS

TR

TR

TR

TR

TR

PSS

PSS

PSS

PSS

PSS

OS

PSS

PSS

OS

OS

PDS

PDS

OS

- 7 .



TYPE

BUILDING SERVICES Heating & Ventilation ASHRAE 33



BUILDING SERVICES Heating & Ventilation BS 2871: Part 3

BUILDING SERVICES Heating & Ventilation BS 3790










BUILDING SERVICES

BUILDING SERVICES

Heating & Ventilation BS 848

Heating & Ventilation BS 848: Part 1

1978 Method of testing forced circulation air cooling and air heatingcoils

1988 Method of testing for rating unitary air-conditioning and heatpump equipment

1976 Method of testing air cleaning devices used in general ventilationfor removing particulate matter

1972 Specification for copper and copper alloys. Tubes : Tubes forheat exchangers

1995 Specification for endless wedge belt drives and endless V-beltdrives

1969 Method for sodium flame test for air filters (other than for airsupply to I.C. engines and compressors)

1997 Determination of sound power levels of fan coil reverberatingrooms

1979 Methods for testing and rating fan coil units, unit heaters and unitcoolers - acoustic performance; with ducting

1972( 1983) Methods for testing and rating terminal reheat units for airdistribution systems - thermal and aerodynamic performance

1978(1983) Methods for testing and rating terminal reheat units for airdistribution systems - acoustic testing and rating

1973(1987) Methods for testing and rating induction units for air distributionsystems - thermal and aerodynamic performance

1978( 1987) Methods for testing and rating induction units for air distributionsystems - acoustic testing and rating

1986 Methods for aerodynamic testing of constant and variable dualduct or single duct boxes, single duct units and induction boxesfor air distribution systems

1985 Air filters used in air-conditioning and general ventilation

Fans for general purposes

1997 Methods of testing performances

AAHK

AAHK

A,D,Em,H,HEC,MTRC

H,HEC,W

A,D,Em,H

A,D,Em,H,MTRC

A, Em

A,D,Em,H,MTRC

A,D,Ern,H

A,D,Em,H

A,D,Em,Ep,H

A,D,Em,Ep,H

A,D,Em,IiHEC

A,Ep,H,HEC\MTRC

AAHK

A,Em,H,HEC,MTRC

TS

TS

TS

PDS

PDS

TS

TS

TS

TS

TS

TS

TS

TS

PDS

PDS

TS



TYPE

BUILDING SERVICES Heating & Ventilation BS 848: Part 2 1985





BUILDING SERVICES Heating & Ventilation BS EN 779

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

Heating & Ventilation CAP 123



Heating & Ventilation CIBSE

Heating & Ventilation CW/151

Heating & Ventilation UL 900

Lifting Appliances BS 1757

Lifting Appliances BS 2573

Lifting Appliances BS 2573: Part 1

BUILDING SERVICES Lifting Appliances BS 3243

BUILDING SERVICES Lifting Appliances BS 4465

1986

1989

1996

1996

1993

1986

1984

1982

1986

1983

BUILDING SERVICES Lifting Appliances BS 2573: Part 2 1980

BUILDING SERVICES Lifting Appliances BS466

1990

1989

1984

Methods of noise testing

Guide for mechanical and electrical safety

Method of measurement of fan vibration

Calorifiers and storage vessels for central heating and hot watersupply

Tubular heat exchangers and storage vessels for building andindustrial services

Paniculate air filters used for general ventilation. Requirements,testing, marking conditioning and general ventilation

Building (ventilation systems) regulations

Ventilation of Scheduled Premises (Regional Council) By-laws

Ventilation of Scheduled Premises (Urban Council) By-laws

CIBSE guide volume A1-A10, B1-B18, C1-C7

Specification for plastic ductwork

Standard for test performance of air filter units

Specification for power-driven mobile cranes

Rules for the design of cranes

Rules for the design of cranes - Specification for classification,stress calculations and design criteria for structures

Rules for the design of cranes - Specification for classification,stress calculations and design of mechanisms

Specification for hand-operated chained blocks

Specification for design and construction of electric hoists forboth passengers and materials

Specification for power driven overhead travelling cranes, semi-goliath and goliath cranes for general use

A,D,Em,Ep,H,HEC,

MTRCA,D,Em,H,HEC5

MTRC

A,D,Em,HEC,MTRC

HEC

HEC

A,D,Em,H,MTRC

A,D,Em

HEC

A,D,Em,MTRC

Em

A,D,Em,HEC,W

A3,D,Em,T,HEC,W

A,D,Em,HEC,W

A,D,Em,HEC,W

A,D,Em,HEC

AAEm,HEC,W

TS

PSS

TS

PDS

PDS

PDS

TR

TR

TR

OS

PDS

TS

PDS

PSS

PSS

PSS

PDS

PSS

PDS

- 9 -



TYPE

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

Lifting Appliances

Lifting Appliances

Lifting Appliances

Lifting Appliances

Lifting Appliances

Lifting Appliances

Lifting Appliances

Lifting Appliances

Lifting Appliances

Lifting Appliances

Lifting Appliances

Lifting Appliances

Lifting Appliances

Lifting Appliances

Lifting Appliances

Lifting Appliances

Lifting Appliances

Lifting Appliances

Lifting Appliances

BS 4942

BS 5639

BS 5639: Part 1

BS 5639: Part 3

BS 5639: Part 5

BS 6166: Part 3

BS 6440

BS7121

BS 7121: Parti

BS 7212

BS 7262

BS 7333

BS ISO 2328

BS ISO 2330

CAP 470

CAP 470

CAP 59

CAP 59

LabourDepartment

1981

1978

1978

1978

1988

1983

1989

1989

1990

1990

1993

1995

1988

A,D,Em

Short link chain for lifting purposes

Fork arms for fork lift trucks

Vocabulary for hook-on type fork arm

Recommendations for dimensions of fork arms

Guide for inspection and repair of fork arms in service

Guide to selection and safe use of lifting slings for multi-purposes

Code of practice for powered lifting platforms for use by disabledpersons

Code of practice for safe use of cranes

Code of practice for safe use of cranes - general

Code of practice for safe use of construction hoists

Specification for automatic safe load indicators

Specification for slewing jib cranes

Specification for mounting dimensions of hook-on type forkarms and fork arm carriages.

Fork-lift Trucks. Fork arms. Technical characteristics andtesting

Builders' Lifts and Tower Working Platforms (Safety) Ordinance

Builders' Lifts and Tower Working Platforms (Safety) (Fees)Regulation

Factories and Industrial Undertakings (Lifting Appliances andLifting gear) Regulations

Factories and Industrial Undertakings (Suspended WorkingPlatforms) Regulations

Code of practice for safe use of mobile cranes & tower cranes HEC

AAHK,HEC,Hy,MTRC

Em

Em

Em

Em

Em

PDS

PDS

OS

PDS

PSS

PSS

Em

PSS

A,D,Em

Em

A,D,Em

A,D,Em,W

Em

Em

PSS

PSS

PSS

PDS

PDS

PDS

TS

TR

TR

TR

TR

PSS

-10-



TYPE

BUILDING SERVICES Lifting Appliances

BUILDING SERVICES Lifts & Escalators




BUILDrNG SERVICES Lifts & Escalators

OSHA Instruction 1985STD 1-3.3

ANSIA17.1

ASD

BA

BA

BA




1993

1996

1993

1993

1993

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

Lifts 8c Escalators

Lifts & Escalators

Lifts & Escalators

Lifts & Escalators

Lifts & Escalators

Lifts & Escalators

Lifts & Escalators

Lifts & Escalators

Lifts & Escalators

Lifts 8c Escalators

BS

BS

BS

BS

BS

BS

BS

BS

BS

BS

302: Part 4

3027

5323

5655

5655: Part

5655: Part

5655: Part

5655: Part

5655: Part

5655: Part

1

2

3

5

6

7

1987

1968

1980

1986

1988

1989

1989

1990

1983

BS 5655: Part 8 1983

BS 5655: Part 9 1985

BS 5655: Part 10 1995

Building anchors used for intermittent stabilisation of asuspended powered platform in window washing operations andlight building maintenance

Safety code for elevators and escalators

General specification for lift and escalator installation inGovernment building

Code of practice on the design and construction of buildings and A,Embuilding works for the installation and safe use of lifts andescalators, Buildings Authority

Code of practice building works for lifts and escalators

Code of practice on the design and construction of buildings andbuilding works for the installation and safe use of lifts andescalators

Specification for ropes for lifts

Specification for Dimensions of Worm Gear Units

Code of practice for scissor lifts

Lifts and service lifts

Safety rules for the construction and installation of electric lifts

Safety rules for the construction and installation of hydraulic lifts

Specification for electric service lifts

Specification for dimensions of standard lift arrangements

Code of practice for selection and installation

Specification for manual control devices, indicators andadditional fittings

Specification for eyebolts for lift suspension

Specification for guide rails

Specification for the testing and inspection of electric andhydraulic lifts

A,D,HEC,T

A,Em,MTRC

A,Em

PDS

OS

PDS

PSS

A,B,Em,H,HEC,MTRC

MTRC

A,AAHK,Ern,HEC

HEC

A,AAHK5D,Em

A,AAHK,Em,H5

MTRC

A,Em,H

A,Em,HEC

A^H

A,D,Em,HsHEC,T

A,Em>H

A,Em,H,HEC

A,Em,H,HEC

A,Em,H,HEC

A,Em,H,HEC

PSS

PSS

PDS

PDS

PSS

PDS

PSS

PSS

PDS

PDS

PSS

PDS

PDS

PDS

TS

-11 -



TYPE












BS 5655: Part10.1.1

BS 5655: Part10.2.1

BS 5655: Part 11 1989

BS 5655: Part 12 1989

BS 5655:

BS 5655:

BS 5656

BS 5776

BS 5900

BS 6440

Part

Part

13

14

1995

1995

1983

1996

1980

1983

BS 6977

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

Lifts & Escalators

Lifts & Escalators

Lifts & Escalators

Lifts & Escalators

Lifts & Escalators

Lifts & Escalators

Lifts & Escalators

BS 7255

BSEN115

CAP 327

CAP 327

CAP 59

CIBSE

EMSD

1989

1995

1993

1996

BUILDING SERVICES Lifts & Escalators EMSD

1995 Electric Lifts Commissioning Test for New Lifts

1995 Hydraulic Lifts : Commissioning Test for New Lifts

Recommendations for the installation of new, and themodernisation of, electric lifts in existing buildings

Recommendations for the installation of new, and themodernisation of, hydraulic lifts in existing buildings

Recommendation for vandal resistant lifts

Specification for hand-powered service lifts and platform hoists

Safety rules for the construction and installation of escalators andpassenger conveyors

Specification for powered stairlifts

Specification for powered homelifts


1991 Specification for insulated flexible cables for lifts and otherflexible connections

Code of practice for safe working on lifts

Safety rules for the construction and installation of escalators andpassenger conveyors

Lifts and Escalators (Safety) Ordinance

Lifts and Escalators (Safety) (Fees) Regulations

Factories and Industrial Undertakings (Goods Lifts) Regulations

Transfertation systems in buildings

Code of practice on design and construction of builders' lifts

1996 Code of practice on the examination, testing and maintenance oflifts and escalators

HEC

HEC

A,Em,H,HEC

A,Em,H,HEC

A,EmsHEC

A,Em

A,Em,H,MTRC

A,Em

A,Em

A,Em

A,AAHKXm,H,HEC

A, Em

A,AAHK,Em,MTRC

II

A,D,Em,H,HEC,MTRC

A,Em,iiHEC,MTRC

TS

TS

PSS

PSS

PDS

PDS

PSS

PDS

PDS

PSS

PDS

PSS

PSS

TR

TR

TR

PDS

PSS

TS

- 1 2 -



TYPE

BUILDING SERVICES Lifts & Escalators EN 81: Part 1

BUILDING SERVICES Lifts & Escalators EN 81: Part 2

BUILDING SERVICES Lifts & Escalators LabourDepartment

BUILDING SERVICES Lighting & Power ASD

1998

1998

1998

BUILDING SERVICES

BUILDING SERVICES

Lighting & Power BS 1853

Lighting & Power BS 1853: Part 2 1995

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

BS 3677

BS 3939

BS 4533:

BS4533:

BS4533:102.1

BS4533:102.10

BS4533:102.17

BS4533:102.2

BS4533:102.4

BS4533:102.5

Part 101

Part 2

Section

Section

Section

Section

Section

Section

1989

1990

1979

1990

1990

1990

1990

1990

1990

Safety rules for the construction and installation of lifts andservice lifts (effective from 1 July 1999)

Safety rules for the construction and installation of hydraulic lifts(effective from 1 July 1999)

Code of practice for safety at work (Lift & Escalators)

General specification for electrical installation in Governmentbuilding of the HKSAR

Tubular fluorescent lamps for general lighting service

Tubular Fluorescent Lamps for General Lighting Service :Specification for Lamps Used in the United Kingdom NotIncluded in BS EN 60081, BS EN 60901, BS EN 61195 and BSEN 61199

Specification for High-Pressure Mercury Vapour Lamps

Graphical symbols for electrical power, telecommunications andelectronics diagrams

Luminaries - specification for general requirements and tests

Luminaries - detail requirements

Specification for fixed general purpose luminaries

Specification for portable child-appealing luminaries

Specification for luminaries for stage lighting, television, filmand photographic studios (outside and indoor)

Specification for recessed luminaries

Specification for portable general purpose luminaries

Specification for floodlights

A,Em,MTRC

A,Em,MTRC

A,H

A,Em,H,T

AAHK

HEC

PSS

PSS

PSS

PDS

PDS

PDS

HEC

AAHK

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

PDS

OS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

- 1 3 -



TYPE

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

BS4533: Section102.6

BS 4533: Section102.7




BS5518

BS559

BS 5649

BS 6972

BS 7001

BS7216

BS EN 60081

BS EN 60238

BS EN 60400

BS EN 60570-2-1

BS EN 60598

BS EN 60598-1

BS EN 60598-2-2

1990

1990

1990

1990

1986

1977

1991

1988

1988

1989(1994)

1994

1996

1996

1995

1993

1997

Specification for luminaries with built-in transformers forfilament lamps

Specification for portable luminaries for garden use

Specification for handlamps

Specification for photo and film luminaries (non-professional)

Specification for photometric characteristics of luminaries forhospitals and health care buildings

Specification for electronic variable control switches (dimmerswitches) for tungsten filament lighting

Specification for electric signs and high-voltage luminous-discharge-tube installation

Lighting columns

Specification for general requirements for luminaire supportingcouplers for domestic, light industrial and commercial use

Specification for interchangeability and safety of a standardisedluminaire supporting coupler

Classification and interpretation of new lighting products

Specification for Tubular Fluorescent Lamps for GeneralLighting Service

Specification for Edison screw lampholders

Specification for lampholders for tubular fluorescent lamps andstarterholders

Electrical Supply Track Systems for Luminaries: Mixed SupplySystems : Classes I and II

Luminaires

Specification for general requirements and tests

Specification for recessed luminaires

HEC

HEC

HEC

HEC

HEC

A,D,Em

A,AAHK,D,Em

A,HEC,Hy,T,W

A,D,Em,MTRC

A,AAHK,D,Em

AAHK

AAHK,HEC

AAHK,Em

AAHK

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

OS

PDS

PDS

PDS

HEC PDS

A,HEC,Hy,T

A,HEC,Hy,T,W

AJiHy

PDS

PDS

PDS

-14-



TYPE

BUILDING SERVICES Lighting & Power BS EN 60598-2-6 1995

BUILDING SERVICES

BUILDING SERVICES

Lighting & Power BS EN 60662 1993

Lighting & Power BS EN 60920 1991

BUILDING SERVICES Lighting & Power BS EN 60921 1991





BUILDING SERVICES Lighting & Power BS EN 61049

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

BS EN 61184

BSG217

CAP 105

CAP 357

CAP 357

BUILDING SERVICES Lighting & Power CAP 357

1993


1995

1975

Specification for luminaires with built-in transformers forfilament lamps

Specification for High-Pressure Sodium Vapour Lamps

Specification for Ballasts for Tubular Fluorescent Lamps.General and Safety Requirements

Specification for Ballasts for Tubular Fluorescent Lamps.Performance Requirements

Specification for General and Safety Requirements for Ballastsfor Discharge Lamps (Excluding Tubular Fluorescent Lamps)

Auxiliaries for Lamps. Ballasts for Discharge Lamps (ExcludingTubular Fluorescent Lamps). Performance Requirements

Specification for auxiliaries for lamps. Starting devices (otherthan glow starters). Performance requirements.

Specification for Capacitors for Use in Tubular Fluorescent andOther Discharge Lamp Circuits. General and SafetyRequirements

Specification for Capacitors for Use in Tubular Fluorescent andOther Discharge Lamp Circuits. Performance Requirements

Specification for Transformers for Tubular Discharge LampsHaving A No-Load Output Voltage Exceeding lOOOv (GenerallyCalled Neon Transformer). General and Safety Requirements

Bayonet Lampholders

Specification for general requirements for cockpit lightingcontrollers

Public lighting Ordinance

Electricity Networks (Statutory Easements) Ordinance

Electricity Networks (Statutory Easements) (Rectification ofApproved Scheme) (Consolidation) Order

Electricity Networks (Statutory Easements) (Application ofOrdinance) (Consolidation) Order

A,H,Hy PDS

HEC

AAHK,HEC

AAHK,HEC

AAHK,HEC

AAHK,HEC

AAHK

AAHK,HEC

AAHKSHEC

HEC

Em,HEC

AAHK

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

TR

TR

TR

TR

- 1 5 -



TYPE

BUILDING SERVICES Lighting & Power CAP 357

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

CAP 406

CAP 406

CAP 406

CAP 406

CAP 406

CAP 406

CAP 59

CIBSE

CLP

CLP CP 101

EMSD

HEC

HEC

HEC

HEC

IEC 60364

IEC 60364-1

IEC 60364-2-21

IEC 60364-3

IEC 60364-4-41

1994

1998

1997

1998

1997

1997

1992

1993

1993

1992

BUILDING SERVICES Lighting & Power


IEC 60364-4-442 1993

IEC 60364-4-443 1995

Electricity Networks (Statutory Easements) (Rectification ofApproved Scheme) Order

TR

Electricity Supply Regulations Sections

Electricity Ordinance

Electricity Supply (Special Area) Regulations

Electricity Supply (Exemption) Regulations

Electricity (Registration) Regulations

Electricity (Wiring) Regulations

Factories and Industrial Undertakings (Electricity) Regulations

Code for interior lighting

Supply rules

Distribution substation design

Code of practice for energy efficiency of lighting installation

Supply Rules

Safety Rules (Electrical)

Guide to Connection of Supply

Inspection Guide Book

Electrical Installations of Building

Scope, Object and Fundamental Principles

Definitions : Guide to General Terms

Assessment of General Characteristics

Protection for Safety - Chapter 41: Protection Against ElectricShock

Protection of Low-Voltage Installations Against Faults BetweenHigh-Voltage Systems and Earth

Protection Against Overvoltaees of Atmospheric Origin Or Due

H

MTRC

A,Em,H,MTRC,W

H

HEC

HEC

HEC

HEC

HEC

HEC

HEC

TR

TR

TR

TR

TR

TR

TR

OS

OS

PSS

PSS

OS

OS

OS

OS

PSS

PSS

PSS

PSS

PSS

PSS

PSSto Switching

- 1 6 -



TYPE

BUILDING SERVICES Lighting & Power IEC 60364-4-444 1996

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power





IEC 60364-4-45 1984

IEC 60364-4-46 1981

IEC 60364-4-481 1993

IEC 60364-4-482 1982

IEC 60364-4-707 1984

IEC 60364-5-51 1997

IEC 60364-5-52 1993

IEC 60364-5-53 1994

IEC 60364-5-548 1996

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Lighting & Power

Security System

Security System

Security System

Security System

IEC 60364-5-551

IEC 60364-6-61

IEC 60364-7-701

IEC 60364-7-703

IEC 60364-7-704

IEC 60364-7-706

IEC 60364-7-714

BS3621

BS 4737

BS 4737: Part 1(IEC 60839-1-1)

BS 4737: Part 3(IEC 60839-1-1)

1994

1986

1984

1984

1989

1983

1996

1980

1986

Protection Against Electromagnetic Interferences (EMI) in HEC

Installations of Buildings

Protection Against Undervoltage

Isolation and Switching

Choice of Protective Measures As A Function of External

Protection Against Fire

Earthing Requirements for the Installation of Data ProcessingEquipment

Common Rules

Wiring Systems

Switchgear and Controlgear

Earthing Arrangements and Equipotential Bonding forInformation Technology Installations

Low-Voltage Generating Sets

Initial Verification

Electrical Installations in Bathrooms

Locations Containing Sauna Heaters

Construction and Demolition Site Installations

Restrictive Conductive Locations

External Lighting Installations

Specification for thief resistant locks

Intruder alarm system

Specification for installed systems with local audible and/orremote signalling

Specification for components A,Em

PSS

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

A,AAHK,D,H,HEC,T

A,Em,MTRC

A,Em

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PDS

PDS

PDS

PDS

-17-


GROUP SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION

BUILDING SERVICES Security System











BS 4737: Part 3 1988Section 3.0 (IEC60839-1-1)











General requirements A, Em

Continuous wiring A,Em

Vibration detectors A,Em

Rigid printed-circuit wiring A,Em

Beam interruption detectors A,Em

Capacitive proximity detectors A,Em

Foil on glass A,E*n

Protective switches A,Em

Specification for PVC insulated cables for interconnecting A,Emwiring

Radiowave Doppler detectors A,Em

Ultrasonic movement detectors A,Em

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

-18-



TYPE

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

Security System

Security System

Security System

Security System

Security System

Security System

Security System

Sound System

Telecommunication

Telecommunication

Telecommunication

Telecommunication

Telecommunication

Telecommunication

Telecommunication

Telecommunication

BS 4737: Part 3Section 3.6 (IEC60839-1-1)




BS 7042

BS 7230

BS 8220

BS 6259

ANSI

BS 3939

BS 3939: Part 1(IEC 60617-1)

BS 4505: Part 1

BS 6266

BS6701

BS EN 28601

BS EN 60617-10

1978

1978

1978

1978

1988

1989

1997

1986(1992)

1981

1992

1994

1992

1996

Acoustic detectors

Passive infra-red detectors

Volumetric capacitive detectors

Pressure mats

Specification for high security intruder alarm systems inbuildings

Code of practice for article theft detection systems

Guide for security of buildings against crime

Code of practice for planning and installation of sound systems

Commercial building telecommunication cabling standard

Graphical symbols for electrical power, telecommunications andelectronics diagrams

General information, general index

Digital data transmission - Specification for basic mode controlprocedures

Code of Practice for Fire Protection for Electronic DataProcessing Installations

Code of practice for installation of apparatus intended forconnection to certain telecommunication systems

Specification for representation of dates and times in informationinterchange

Graphical symbols for diagram - Telecommunications:

A, Em

A,Em

A,Em

A,Em

AAHK

A,Em

AAHK

A,Em,MTRC

AAHK

A,AAHK,D,Em,W

A,AAHK,D,Em,W

AAHK

HEC

AAHK,Em

AAHK

A,D,Em,W

PDS

PDS

PDS

PDS

PDS

PSS

PSS

PSS

PDS

OS

OS

PSS

PSS

PSS

OS

OStransmission

- 19-



TYPE

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDING SERVICES

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

Telecommunication

Telecommunication

Telecommunication

Telecommunication

Telecommunication

Telecommunication

Telecommunication

Telecommunication

Telecommunication

Telecommunication

Telecommunication

Telecommunication

Access for Disabled

Access for Disabled

Access for Disabled

Access for Disabled

Access for Disabled

Access for Disabled

Access for Disabled

Access for Disabled

Chimney & Fireplace

Chimnev & Fireolace

BS EN 60617-11

BS EN 60617-2

BS EN 60617-3

BS EN 60617-4

BS EN 60617-5

BS EN 60617-6

BS EN 60617-7

BS EN 60617-8

BS EN 60617-9

CAP 106

CAP 106

HKT

BA

BA

BS 5588: Part 8

BS5619

BS5810

BS 6440

CAP 123

PD 6523

ASCE

BD PN 45

1997

1996

1996

1996

1996

1996

1996

1996

1996

1983

1984

1997

1988

1978

1979

1983

1989

1994

Architectural and topographical installation plans and diagrams

Symbol elements, qualifying symbols and other symbols havinggeneral application

Conductors and connecting devices

Passive components

Semiconductors and electron tubes

Production and conversion of electrical energy

Switchgear, controlgear and protective devices

Measuring instruments, lamps and signalling devices

Telecommunications: switching and peripheral equipment

Telecommunication Ordinance

Telecommunication Regulations

Code of Practice - Protection of Communication Networks fromElectrical Power Distribution

Design manual: Access for the Disabled

Design manual: Barrier Free Access

Fire precautions in the design, construction and use of buildings -code of practice for means of escape for disabled people

Code of practice for design of housing for the convenience ofdisabled people

Code of practice for access for the disabled to buildings


Building (Planning) Regulations, Regulation 72

Information on access to and movement within and aroundbuilding for disabled people

Design and Construction of Steel Chimney Liners

Chimney and flues

A,D,Em,W

A,D,Ern,W

A,D,Em,W

A,D,Em,W

A, Em

A, Em

A, Em

A, Em

A, Em

HEC

A,B,HEC,T

A,B,H,T

A,D,HECT

OS

OS

PDS

PDS

PDS

PSS

PDS

PDS

PDS

TR

TR

PSS

PSS

PSS

PSS

A,HEC,T PSS

A,HEC

A,HEC,T

A,HEC,T

HEC

A,B,HEC

PSS

PSS

TR

OS

PSS

PDS

-20-



TYPE

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

Chimney & Fireplace

Chimney & Fireplace

Chimney & Fireplace

Chimney & Fireplace

Chimney & Fireplace

Chimney <fe Fireplace

Chimney & Fireplace

Chimney & Fireplace

Chimney & Fireplace

Chimney & Fireplace

Chimney & Fireplace

Cladding/Tiles

Cladding/Tiles

Cladding/Tiles

Cladding/Tiles

Cladding/Tiles

Curtail Walls/Glazing

Curtain Wall

BS1251

BS 3572

BS 3678

BS 4076

BS4211

BS 4543: Part 2

BS 4543: Part 3

BS 6461: Parti

BS 7566: Part 1

BS 7566: Part 3

CAP 123

BS 3987

BS 8000: Part 6

BS 8200

BS 8298

CAP 123

BS 8000: Part 7

CAP 123

1987

1986(1992)

1986(1992)

1989

1994

1990

1990

1984

1992

1992

1974(1991)

1990

1985

1990

Specification for open-fireplace components.

Specification for access fittings for chimneys and other highstructures in concrete or brick work

Specification for access hooks for chimneys and other highstructures in steel.

Specification for steel chimneys

Specification for ladders for permanent access to chimneys otherhigh structures, silos and bins

Specification for chimneys with stainless steel flue linings for usewith solid fuel fixed appliances

Specification for chimneys with stainless steel fluelining for usewith oil fired appliances

Code of practice for masonry chimneys and flue pipes

Installation of factory-made chimneys to BS 4543 for domesticappliances - method of specifying installation design information

Installation of factory-made chimneys to BS 4543 for domesticappliances - specification for site installation

Building (Construction) Regulations Part X

Specification for anodic oxide coatings on wrought aluminiumfor external architectural applications

Workmanship on building sites: code of practice for slating andtiling of roofs and claddings

Code of practice for design of non-loadbearing external verticalenclosures of buildings

Code of Practice for Design and Installation of Natural Stonecladding and Lining

Building (Construction) Regulations, Regulation 39

Workmanship on building sites: code of practice for glazing

Building (Construction)Regulations, Regulation 43

A,HEC

A,HEC

A,HEC

PDS

PDS

PDS

A,B,Ep,HEC

A,AAHK,HEC,Hy,MTRCJ

A,B,HEC

A,B,Ep,HEC

A,Ep,HEC

A,Ep,HEC

PDS

PDS

PDS

PDS

PSS

PSS

A,Ep,HEC PSS

A,C,D,H,HEC,T

A,D,HEC,T

A,AAHK,D,HEC,T

MTRC

AAHEQT

TR

PDS

PSS

PSS

PSS

TR

PSS

TR

-21 -



TYPE

BUILDTNGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

Curtain Wall/Glazing AAMA 501.1 1983

Curtain Wall/Glazing AAMA 501.2 1983

Curtain Wall/Glazing ANSI Z97.1 1984

Curtain Wall/Glazing ASTM C 1048 1990

Curtain Walls/Glazing ASTM C 1036

Curtain Walls/Glazing BD PN 106 1995

Curtain Walls/Glazing BD PN 106 1995

Curtain Walls/Glazing BS 5713 1979(1994)

Curtain Walls/Glazing BS 6206 1981(1994)

Curtain Walls/Glazing BS 6262 1982

Curtain Walls/Glazing BS 7352 1990

Curtain Walls/Glazing BS 952

Curtain Walls/Glazing



Doors & Windows

Doors & Windows

Doors & Windows

BS 952: Part 1

BS 952: Part 2

CAP 123

ASTM E 283

ASTM E 330

ASTM E 331

1978

1980

1984

1990

1986

Standard test method for metal curtain walls for waterpenetration using dynamic pressure

Field check of metal curtain walls for water leakage

Performance specifications and methods of test for safety glazingmaterial used in buildings

Specification for Heat Treated Flat Glass-kind HS, Kind FTCoated and Uncoated Glass

Flat Glass

Curtain wall systems

Curtain wall systems

Specification for Hermetically Sealed Flat Double Glazing Units

Specification for impact performance requirements for flat safetyglass and safety plastics for use in buildings

Code of practice for glazing for buildings

Specification for strength and durability performance of metalhinges for side hanging applications and dimensionalrequirements for template drilled hinges

Glass for glazing

Classification

Terminology for work on glass

Building (Construction) Regulations, Regulation 39

Standard test method for rate of air leakage through exteriorwindows, curtain walls and doors

Standard test method for structural performance of exteriorwindows, curtain walls, and doors by uniform static air pressuredifference

Standard test method for water penetration of exterior windows,curtain walls, and doors by uniform static air pressure difference

A,D,H,HEC,T

A,D,H,HEC,T

A,AAHK,D,T,

HEC

A,D,HEC,T

MTRC

A,B,D,H,T

HEC

A,D,HEC,T

AAHK,HEC,Hy,MTRC

AAAHK,B,DJi,HEC,Hy,MTRC,T

A,D,H,HEC,T

A,D,H,HEC,HyXW

A,D,H,HEC,Hy,MTRCT

A3,D,H,HEC/T

AJXHECT;

AAHECJ;

AAHECX

TS

TS

TS

PDS

PDS

PDS

PDS

PDS

PDS

PSS

PDS

PDS

OS

OS

TR

TS

TS

TS

-22-



TYPE

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

Doors & Windows

Doors & Windows

Doors & Windows

Doors & Windows

Doors & Windows

Doors & Windows

Doors & Windows

Doors & Windows

Doors & Windows

Doors & Windows

Doors & Windows

Doors & Windows

Doors <& Windows

Doors & Windows

Doors & Windows

Doors & Windows

Doors & Windows

Doors & Windows

Doors & Windows

Means of Escape

BS 1245

BS4315

BS459

BS 4873

BS4951

BS 5368

BS 5368: Part I

BS 5368: Part 2

BS 5368: Part 3

BS 5368: Part 4

BS 5872

BS 5977: Part 2

BS 6375

BS 6375: Part 1

BS 6375: Part 2

BS6510

BS 8213: Parti

BS 8213: Part 4

CP 153: Part 3

BA

1975 (1986) Specification for metal door frames (steel)

1983 Methods of test for resistance to air and water penetration

1988 (1995) Specification for matchboarded wooden door leaves for externaluse

1986 Specification for aluminium alloy windows

1973(1995) Specification for builders' hardware: lock and latch furniture(doors)

Methods of testing windows

1976( 1994) Air permeability test

1980( 1994) Water tightness test under static pressure

1978( 1994) Methods of testing windows - wind resistance tests

1978( 1994) Methods of testing windows - form of test report

1980(1995) Specification for locks and latches for doors in buildings

Specification for Prefabricated Lintels

Performance of windows

1989 Classification for weathertightness (including guidance onselection and specification)

1987(1995) Specification for operation and strength characteristics

1984 Specification for steel sills, windows, window boards and doors

1991 Code of practice for safety in use and during cleaning ofwindows and doors (including guidance on cleaning materialsand methods)

1990 Code of practice for the installation of replacement windows anddoorsteps in dwellings

1972 Windows and rooflights - sound insulation

1995 Code of practice for means of access for fire fighting and rescue

AAHK

HEC

AAHK

A,AAHK,D,HEC,Hy,T

A,AAHK,D,H5

HEQT

AAHK

AAHK,D,H,HEC,T

D,H,HEC,T

A,AAHK,B,D,H,HEC,T

A,D,HEC,T

A,AAHK,D,H,HEC,T

MTRC

AAHK

AAHK

A,D,HEC,T

A,AAHK,D,HEC,Hy,T

AAEp,HEC,T

PDS

TS

PDS

PDS

PDS

TS

TS

TS

TS

TS

PDS

PDS

PDS

OS

PDS

PDS

PSS

A,D,HEC PSS

A,D,Ep,HEC,T PSS

A,B,Em,H,HEC,T PSS

-23-



TYPE

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

Means of Escape

Means of Escape

Means of Escape

Means of Escape

Means of Escape

Means of Escape

Means of Escape

Means of Escape

Means of Escape

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

BA

BS 5266

BS 5266: Part 1

BS 5266: Part 3

BS 5395

BS 5725: Part 1

BS EN 1125

CAP 123

CAP 172

BS 5606

BS 6093

BS6180

BS 6954: Part 1

BS 6954: Part 2

BS 6954: Part 3

BS 7543

1996

1988

1981

1985

1981

1997

1990

1995

1988(1994)

1988(1994)

1988(1994)

1992

Code of practice for the provision of means of escape in case offire

Emergency lighting

Code of practice for the emergency lighting of premises otherthan cinemas certain other specified premises used forentertainment

Specification for small power relays (electromagnetic) foremergency lighting applications up to and including 32A

Stairs, Ladders and walkways

Emergency exit devices - specification for panic bolts and paniclatches mechanically operated by a horizontal push-bar

Building hardware. Panic exit devices operated by a horizontalbar. Requirements and test methods

Building (Planning) Regulations Part V

Places of Public Entertainment Ordinance

Guide to accuracy in building

Code of Practice for Design of Joints and Jointing in BuildingConstruction

Code of practice for barriers in and about buildings

Tolerances for building - recommendations for basic principlesfor evaluation and specification

Tolerances for building - recommendations for statistical basisfor predicting fit between components having a normaldistribution

Tolerances for building - recommendations for selecting targetsizes and predicting fit

Guide to durability of buildings and building elements, productsand components

A,B,H,HEC,T

A,AAHK,D,Ern,H,MTRC

A,AAHK,DsEm,H,MTRC

A,D,Em,H

HEQHy

A,AAHK,D,H,HEC,MTRC,T

A,Em

A,D,H,HEC,T

A,D,H,HEC,MTRC/F

AAHK,MTRC

A,D,HEC,T

A,D,HECT

A,D,HEC,T

AJXHBCT

PSS

PDS

PSS

PDS

PSS

PDS

PDS

TR

TR

OS

PSS

PSS

0 $

OS

0 $

PDS

-24-



A,D,HEC,T

A,D,HEC,Hy,MTRC,T,W

TYPE

PSS

TR

PSS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

Miscellaneous

Miscellaneous

Partition, Ceiling Wall& Floor

Partition, Ceiling Wall& Floor

Partition, Ceiling,Wall & Floor

Partition, Ceiling,Wail & Floor










BS 8103: Parti 1986

CAP 123

BS 5385: Part 3

BS 5385: Part 5

ASTM C 636

ASTMD418

ASTME1155M

ASTM E 580

BS 1243

BS 1494: Part 1

BS 1711

BS 3260

BS 3261: Parti

BS 4592

BS 4592: Part 1

1989

1994

Structural design of low-rise buildings - code of practice forstability, site investigation, foundations and ground floor slab forhousing

Building (refuse storage chambers and chutes) regulations

Code of practice for design and installation of ceramic floor tilesand mosaics

Code of practice for the design and installation of terrazzo tileand slab, natural stone and composition block floorings

A,D,HEC,Hy,T,W PSS

Practice for Installation of Metal Ceiling Suspension Systems for MTRCAcoustical Tile and Lay-in Panels

1978

1964

Standard Methods for Testing Pile Yarn Floor CoveringConstruction

Determining FF (floor flatness)

Practice for Application of Ceiling Suspension Systems forAcoustical Tile and Lay-in Panels in Areas Requiring SeismicRestraint

Specification for metal ties for cavity wall construction

Specification for accessories for building purposes: fixing forsheet, roof and wall covering

MTRC

MTRC

MTRC

1975( 1996) Specification for solid rubber flooring

1969(1991) Specification for semi-flexible PVC (Vinyl) floor tiles

A,D,HEC,T

A,H

PSS

TS

TS

PSS

A,HEC,MTRC,T PDS

A,AAHK,H,HEC, PDSHy,T,W

PDS

PDS

1991(1973) Specification for unbacked flexible PVC flooring: homogeneous A,D,H,HEC,T PDSflooring

1987

Industrial type flooring, walkways and stair treads

Specification for open bar gratings

A,D,H,HEC,Hy,T,W PDS


- 2 5 -



BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS
















BS 4592: Part 2 1987(1994) Specification for expanded metal grating panels

BS 4592: Part 3 1987

BS 4790

BS 4902

1987

1976

BS 5085: Part 1 1991

BS 5085: Part 2 1991

BS 5325

BS 5385: Part 1 1995

BS 5385: Part 4 1992

BS 5442: Parti 1989

BS 5442: Part 2 1989

BS 5921

BS6431

Specification for cold formed planks

Method for determination of the effects of a small source ofignition on textile floor coverings (hot metal nut method)

Specification for sheet and tile flooring colours for buildingpurposes

Specification for backed flexible PVC flooring: needle-loom feltbacked flooring

Specification for backed flexible PVC flooring: cellular PVCbacking

Code of Practice for Installation of Textile Floor Coverings

Code of practice for the design and installation of internalceramic and natural stone wall tiling and mosaics in normalconditions

Code of practice for tiling and mosaics in specific conditions

Classification of adhesives for use with flooring materials

Classification of adhesives for use with interior wall and ceilingcoverings (excluding decorative flexible materials in roll form)

Method of Determination of Size, Squareness, and Straightncssof Textile Floor Covering Tiles.

Ceramic floor and wall tiles



H,HEC

A,D,HEC,T,W

D,HEC,T

A,D,H,HEC,T

MTRC

TS

PDS

PDS

PDS

PSS

BS 6431: Part 1 1983 (1996) Specification for classification and marking, includingdefinitions and characteristics

BS 6431: Part 10 1984 Method for determination of dimensions and surface quality

A,D,H,HEC,Hy,MTRCT

A,D,H,Hv,T,W,HEC

A,D,HEC,MTRQT

A,D,HEC,MTRC,T

MTRC

A,AAHK,D,H,HEC,Hy,T

A,AAHK,D,fiHEC,Hy,MTRC\T

A,DJ-m,£iHECHv\1\W

PSS

PSS

OS

OS

TS

PDS

OS

TS

- 2 6 -



TYPE

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS












Partition, Ceiling,Wail & Floor





BS 6431: Part 11 1983 Method for determination of water absorption

BS 6431: Part 12 1983(1996) Method for determination of modulus of rupture

BS 6431: Part 13 1986( 1996) Method for determination of scratch hardness of surfaceaccording to mohs

BS 6431: Part 14 1983(1996) Method for determination of resistance to deep abrasion.Unglazed tiles

BS 6431: Part 15 1983(1996) Method for determination of linear thermal expansion

BS 6431: Part 16 1983(1996) Method for determination of resistance to thermal shock

A,D,Em,H,HEC,Hy,T,W

A,D,H,HEC,Hy,T

A,D,H,HEC,Hy,T

A,D,H,HEC,Hy,T

A,D,H,HEC,Hy,T

A,D,H,HEC,Hy,T

BS 6431: Part 17 1983(1996) Method for determination of crazing resistance. Glazed tiles A,D,H,HEC,Hy,T

BS 6431: Part 18 1983

BS 6431: Part 19 1984

Methods of determination of chemical resistance. Unglazed tiles A,D,Em,H,HEC,Hy,T,W

Method for determination of chemical resistance. Glazed tiles A,D,Em,H,HEC,Hy,T,W

BS 6431: Part 2 1984(1996) Specification for extruded ceramic tiles with low waterabsorption (E < - 3%) Group Al

BS 6431: Part 20 1984(1996) Method for determination of resistance to surface abrasion.Glazed tiles

BS 6431: Part 22 1986(1996) Method for determination of frost resistance

BS 6431: Part 23 1986(1996) Specification for sampling and basis for acceptance

A,AAHK,D,H,HEC,Hy,MTRC,T

A,D,H,HEC,Hy,T

A,D,H,HEC,Hy,T

A,D,H,HEC,Hy,T

BS 6431: Part 3

BS 6431 :Part 3Section 3.1


1986 Extruded ceramic tiles with a water absorption of 3% < E <= 6%. A,AAHK,D,H,Group Al ia HEC,Hy,T

1986( 1996) Specification for general products A,AAHK,D,H,HEC,Hy,T

1986(1996) Specification for products (terre cuite, cotto, baldosin Catalan) A,AAHK,D,H,HEC,Hy,T

TS

TS

TS

TS

TS

TS

TS

TS

TS

PDS

TS

TS

TS

PDS

PDS

PDS

-27-



TYPE

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS








Partition, Ceiling,Wall 8c Floor









BS 6431 :Part 4



BS 6431: Part 5

BS 6431: Part 6

BS 6431: Part 7

BS 6431: Part 8

BS 6431: Part 9

BS 8203

BS 8204: Part 1

BS 8204: Part 2

BS 8290: Part 1

BS 8290: Part 2

BS 8290: Part 3

BS EN 649

CISCA

1986

1986(1996)

1986(1996)

1986(1996)

1984(1996)

1986(1996)

1986(1996)

1984(1996)

1996

1987

1987

1991

1997

Extruded ceramic tiles with a water absorption of 6% < E <=10%. Group Al lb

1986(1996) Specification for general products

1986(1996) Specification for products (terre cuite, cotto, baldosin Catalan)

Specification for extruded ceramic tiles with a water absorptionofE>10%.GroupAll l

Specification for dust-pressed ceramic tiles with a low waterabsorption (E <= 3%). Group Bl

Specification for dust-pressed ceramic tiles with a waterabsorption of 3% < E <= 6%. Group B11 a

Specification for dust-pressed ceramic tiles with a waterabsorption of 6% < E <= 10%. Group Bl lb

Specification for dust-pressed ceramic tiles with a waterabsorption of E > 10%. Group B i l l

Code of practice for installation of sheet and tile flooring

Code of practice for concrete bases and screeds to receive in-situflooring

Code of practice for concrete wearing surfaces

Code of practice for design

Specification for Performance of Components and Assemblies ofSuspended Ceilings

Code of Practice for Installation and Maintenance of SuspendedCeilings

Resilient floor coverings. Homogeneous and heterogeneouspoly vinyl chloride floor coverings. Specification

Recommended Test Procedures for Access Floors

A,AAHK,DJiHEC,Hy,T

A,AAHK,D,H,HEQHy/T

A,AAHK,D,H,HEC,Hy,T

A,D,H,HEC,H>\T

A,D,H,HEC,Hy,MTRC/F

A,D,H,HF.C,Hv,T

AAH,HEC,Hy/r

A,D,H,HKC\Hv,T

Di lECT

D,H,HKC\MTRC\T

A,D,RMTRC.T

A,MTRC

MTRC

MIRC*

AAHK

MTRC

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PSS

FSS

PSS

FSS

PDS

PSS

PDS

TS

- 2 8 -



BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS






Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

CP202

CP 204: Part 2

CP290

CRI104


BS1125

BS1188

BS 1189

BS 1212

BS 1212: Parti

BS 1212: Part 2

BS 1212: Part 3

BS 1212: Part 4

BS 1244: Part 2

BS 1254

BS 1390

BS 1876

BS 1968

1972

1970

1973

1987

1974

1986

1990

1990

1990

1990

1991

1988

1981

1990

1990

1953

Code of practice for tile flooring and slab flooring

In-situ floor finishes: metric units

Code of practice for suspended ceilings and linings of dryconstruction using metal fixing systems

Standard for Installation of Commercial Textile Floorcovering MTRCMaterials

Code of Practice for Wall and Floor Tiling

Specification for WC flushing cisterns (incl. dual flush cisternsand flush pipes)

Specification for ceramic wash basins and pedestals

Specification for baths made from porcelain enamelled cast iron

Float operated valves

Specification for piston type float operated valves (copper alloybody) (excluding floats)

Specification for diaphragm type float operated valves (copperalloy body) (excluding floats)

Specification for diaphragm type float operated valves (plasticsbodied) for cold water services only (excluding floats)

Specification for compact type float operated valves for WCflushing cisterns (incl. floats)

Metal sinks for domestic purposes: specification for sit-on andinset sinks

Specification for WC seats (plastics)

Specification for baths made from vitreous enamelled sheet steel

Specification for automatic flushing cisterns for urinals

Specification for floats for ballvalves (copper)

A,H,HEC,T

A,D,H,HEC,T

A,H,HEC,T

MTRC

MTRC

A,D,H,HEC,T

A,D,H,HEC,T

A,H,D,T,HEC

AAHK,HEC, MTRC





A,D,H,HEC,T

A,D,H,HEC,T

A,D,HEC,T

A,D,H,HEC,T

A/D,H,HEC,MTRCJ

PSS

PSS

PSS

PSS

PSS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

. 2 9 -



TYPE

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

BS 2456

BS 2879

BS3380

BS 3402

BS 3505

BS 3943

BS 417: Part 2

BS 4346: Part 1

BS 4346: Part 2

BS 4375

BS4514

BS 5255

BS 5412: Part 1

BS 5412: Part 2

BS 5412: Part 3

BS 5412: Part 4

1990

1980(1988)

1982

1969

1986

1979(1988)

1987

1969

1970

1968

1983

1989

1996

1996

1996

1996

Specification for floats (plastics) for float operated valves forcold water services

Specification for draining taps (screw-down pattern)

Specification for wastes (excluding skeleton sink wastes) andbath overflows

Specification for quality of vitreous China sanitary appliances,

UPVC pressure pipes for cold potable water

Specification for plastics waste traps

Specification for galvanised low carbon steel cisterns, cisternlids, tanks and cylinders - metric units

Injection moulded unplasticized PVC fittings for solventwelding for use with pressure pipes, including potable watersupply

Mechanical joints and fittings, principally of unplasticized PVC

Specification for unsintered PTFE tape for thread sealingapplications

Specification for unplasticized PVC soil and ventilating pipes,fittings and accessories

Specification for thermoplastics waste pipe and fittings

Specification for performance of draw-off taps with metal bodiesfor water services: dimension and design characteristics

Specification for performance of draw-off taps with metal bodies A,D,H,Tfor water services: water tightness and pressure resistancecharacteristics

Specification for performance of draw-off taps with metal bodies A,D,H,Tfor water services: hydraulic characteristics

Specification for performance of draw-off taps with metal bodies AJ),IiT'for water services: mechanical and endurance characteristics


AAHK

A,D,H,HECJ

A,D,H,HEC,T

A,B,C,D,H,HEC,Hy,T

A,D,H,HEC,T

A,AAHK,D,H,HEC,Hy,T

A,B,D,H,HEC,T

A,B,D,H,HEC,T

A,D,H,HEC,T

A,B,D,H,HEC,T

AMU iEC/rAJXRHECT

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

-30-



TYPE

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

BS 5412: Part 5 1996

BS 5503: Parti 1977

BS 5503: Part 2 1977

BS 5503: Part 3 1990

BS 5504: Parti 1977

BS 5504: Part 2 1977

BS 5504: Part 3 1977

BS 5504: Part 4 1990

BS 5520

BS 5572

BS 5627

BS 6700

BS 6974

BS864

1977

1994

1984

BS 6340: Part 8 1985

1987

1991

Specification for performance of draw-off taps with metal bodies A,D,H,Tfor water services: Physio-chemical characteristics : materialscoatings

Vitreous china washdown WC pans with horizontal outlet:connecting dimensions

Vitreous china washdown WC pans with horizontal outlet:materials, quality, performance and dimensions other thanconnecting dimensions

Vitreous china washdown WC pans with horizontal outlet:specification for WC pans with horizontal outlet for use with7.5L maximum flush capacity cisterns

Wall hung WC pan with close coupled cistern. Connectingdimensions

Wall hung WC pan with independent water supply. Connectingdimensions.

Wall hung WC pans. Materials and quality and functionaldimensions other than connecting dimensions

Specification for wall hung WC pans for use with 7.5L maximumflush capacity cisterns

Specification for vitreous china bowl urinals (rimless type)

Code of practice for sanitary pipework

Specification for plastics connectors for use with horizontaloutlet vitreous china WC pans

Specification for prefabricated shower trays made from glazedceramic

Specification for design, installation, testing and maintenance ofservices supplying water for domestic use within buildings andtheir curtilages

Specification for unsintered PTFE tape for thread sealingapplications (coarse threads)

Capillary and compression tube fittings of copper and copperalloy

PDS

A,D,H,HEC,T

A,D,H,HEC,T

A,D,H,HEC,T

A,D,HEC,T

A,D,HEC,T

A,D,HEC,T

A,D,HEC5T

A,D,H,HEC,T

AAH,HEC,T

A,D,H,HECST

A,H,HEC,T

A,D,H,HEC,MTRC,T

A,D,HEC,T

MTRC

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PSS

PDS

PDS

PSS

PDS

PDS

-31 -



TYPE

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

Plumbing

Plumbing

Plumbing

Plumbing

Plumbing

Roofs

Roofs

Roofs

Roofs

Roofs

Roofs

Roofs

Roofs

Roofs

Roofs

Roofs

Roofs

BS 864: Part 2

BS EN 1057

BS EN 248

CAP 123

CP342

BS 1091

BS1431

BS 1494: Part 1

BS 2997

BS 3083

BS 402: Part 1

BS4154

BS 4576

BS 4576: Part 1

BS460

BS 476: Part 3

1983

1996

1992

1963(1980)

1960(1980)

1964

1958(1980)

1988

1990

1985(1994)

1989

1989

1964(1981)

1975

BS 5427 1976

Specification for capillary and compression fittings for coppertubes

Copper and copper alloys. Seamless, round copper tubes forwater and gas in sanitary and heating applications

Sanitary taps: general technical specifications forelectrodeposited nickel chrome coatings

Building (Standards of Sanitary Fitments, Plumbing, DrainageWorks and Latrines) Regulations

Code of practice for centralised hot water supply

Specification for pressed steel gutters, rainwater pipes, fittingsand accessories

Specification for wrought copper and wrought zinc guttersrainwater goods

Specification for accessories for building purposes: fixing forsheet, roof and wall covering

Specification for aluminium rainwater goods

Specification for hot-dip zinc coated and hot-dip aluminium/zinccoated corrugated steel sheets for general purposes

Specification for plain thick tiles & fittings

Corrugated plastics translucent sheets made from thermo-settingpolyester resin (glass fibre reinforced)

Unplasticized polyvinyl chloride (PVC-U) rainwater goods andaccessories

Unplasticized polyvinyl chloride (PVC-U) rainwater goods andaccessories - half-round gutters and pipes of circular crosssections

Specification for cast iron gutters, rainwater goods

External fire exposure roof test

Code of practice for performance and loading criteria for profiledsheeting in building

A,AAHK,D,H,HEC,T

AAHK

A,D,HEC,T

A,H,HECJ

A,D,HEC,T

A,D,HEC,T

A,AAHK,D,H,HEC,Hy,T,W

A,D,HEC,T

A,AAHK,D,H,HEQT

A,D,HEC,Hy,T,W

A,AAHK,D,H,HEQT

A3,D,H,HEC,T

A,D,H,HEC,Hy,MTRCJ

A,D,H,HEC,T

A,AAHK,B,RHEC,T

A,AAHK,D,I I,HECT

PDS

PDS

PDS

TR

PSS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

TS

PSS

-32-



BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

Roofs

Roofs

Roofs

Roofs

Roofs

Roofs

Roofs

Roofs

Roofs

Roofs

Roofs

Roofs

Roofs

Roofs

Roofs

Roofs

Roofs

Roofs

Roofs

Roofs

BS 5534: Part 1

BS 5534: Part 2

BS 6229

BS 6367

BS 6399: Part 3

BS 680: Part 1

BS 680: Part 2

BS6915

BS7021

BS747

BS 8000: Part 4

BS8217

BS EN 490

BSEN491

CAP 123

CP 143: Parti

CP 143: Part 10

CP 143: Part 12

CP 143: Part 15

CP 143: Part 5

1997

1986

1982

1983

1988

1944

1971

1988

1989

1994

1989

1994

1994

1994

1958

1973

1970(1988)

1973(1986)

1964

Code of practice for slating and tiling - design

Design charts for fixing of slating and tiling against wind uplift

Code of Practice for design of flat roofs with continuouslysupported coverings

Code of practice for drainage of roofs & paved areas

Loading for buildings - code of practice for imposed roof loads

Specification for roofing slates - imperial units

Specification for roofmg slates - metric units

Specification for design and construction of fully supported leadsheet roof and wall coverings

Code of practice for thermal insulation of roofs externally bymeans of sprayed rigid polyurethane (PUR) or polyisocyanurate(PIR) foam.

Specification for roofing felts

Workmanship on building sites: code of practice for waterproofing

Code of practice for built-up felt roofing

Concrete roofmg tiles & fittings. Product specifications

Concrete roofing tiles & fittings. Test methods

Building (Construction) Regulations Part XI and Part III

Code of practice for sheet, roof and wall covering: aluminiumcorrugated & troughed

Code of practice for sheet roof & wall coverings: galvanisedcorrugated steel. Metric units

Code of practice for sheet roof & wall coverings: copper. Metricunits

Code of practice for sheet roof & wall coverings: aluminium.Metric units

Code of practice for sheet roof & wall coverings: zinc

A,AAHK,D,HEC,Hy,T,W

A,D,HEC,T

A,D,HEC,T

A,D,HEC,T

A,D,HEC,T

A,D,HEC,T

A,D,HEC,T

A,AAHK,D5HEC,T

PSS

PSS

PSS

PSS

PSS

PDS

PDS

PSS

A,D,HEC,T PSS


A,D,HEC,T PSS

AAHK

A,D,HEC,T

A,D,HEC,T

A,D,HEC9T

A5AAHK,D,H,HEC,T

A,AAHK,D,H,HEC,T

A,AAHK,D,H,HEQT

A.D.HECT

PSS

PDS

TS

TR

PSS

PSS

PSS

PSS

PSS

-33-



TYPE

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

Roofs

Roofs

Roofs

Sound Insulation

Sound Insulation

Sound Insulation

Sound Insulation

Sound Insulation

Sound Insulation

Sound Insulation

Sound Insulation

Sound Insulation

Sound Insulation

Sound Insulation

Sound Insulation

Sound Insulation

Sound Insulation

Sound Insulation

CP144

CP 144: Part 3

CP 144: Part 4

ASTM E 1264

BS 2750

BS 2750: Part 2

BS 2750: Part 3

BS 2750: Part 4

BS 2750: Part 5

BS 2750: Part 6

BS 2750: Part 7

BS 2750: Part 9

BS5821

BS 5821: Part 3

BS 8233

BS EN 20354

BS EN ISO 140-3

BS EN ISO 3746

1970

1970

1980

1980

1980(1993)

1980(1993)

1980(1993)

1980(1993)

1984(1993)

1984(1993)

1987

1993

1995

1996

Roof coverings

Roof coverings - built-up bitumen flet. Metric units

Proof coverings - mastic asphalt. Metric units

Standard Classification for Acoustical Ceiling Products

Measurement of sound insulation in buildings and of buildingelements

Statement of precision requirements

Laboratory measurements of airborne sound insulation ofbuilding elements

Field measurements of airborne sound insulation between rooms

Field measurements of airborne sound insulation of facadeelements and facades

Laboratory measurements of impact sound insulation of floors

Field measurements of impact sound insulation of floors

Laboratory measurement of room-to-room airborne soundinsulation of a suspended ceiling with a plenum above it

Methods for rating the sound insulation in building and ofbuilding elements.

Methods for rating the airborne sound insulation of facadeelements and facades

Code of practice for sound insulation and noise reduction forbuildings

Acoustics. Measurement of sound absorption in a reverberationroom

Acoustics. Measurement of sound insulation in buildings and ofbuilding elements - Laboratory measurements of airborne soundinsulation of building elements

Acoustics. Determination of sound power levels of noise sources AAHKusing sound pressure. Survey method using an envelopingmeasurement surface over a reflecting plane

MTRC

A,D,H,HEC,Hy,T

A,AAHK,H,HEC,Hy,T

MTRC

A,Ep,D,HEC,T

A

A

A

A

A

A

A

A,D,Ep,HEC,T

A

A,Ep,D,HEC,T

AAHK

AAHK

PDS

PDS

PDS

OS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

PSS

TS

TS

TS

-34-



TYPE

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

Sound Insulation

Sound Insulation

Sound Insulation

Stairs

Thermal Insulation

Thermal Insulation

Thermal Insulation

Thermal Insulation

Thermal Insulation

Thermal Insulation

Thermal Insulation

Thermal Insulation

Thermal Insulation

Thermal Insulation

Thermal Insulation

Thermal Insulation

Thermal Insulation

Thermal Insulation

BS EN ISO 717-1

BS EN ISO 717-2

CP 153: Part 3

BS 5395: Part 1

ASTME 119

ASTME 136

ASTM E 84

BA

BA

BS 3019: Part 2

BS 3869

BS 3927

BS 3958: Part 1

BS 3958: Part 2

BS 3958: Part 3

BS 3958: Part 4

BS 3958: Part 5

BS 3958: Part 6

1997

1997

1972

1977(1984)

1995

1996

1960

1965

1986

1982

1982

1985

1982

1986

1972(1980'

Airborne sound insulation

Impact sound insulation

Windows and rooflights - sound insulation

Stairs, ladders and walkways - Code of practice for the design ofstraight stairs

Test Methods for Fire Tests of Building Construction andMaterials

Test Method for Behaviour of Materials in a Vertical TubeFurnace at 750°C.

Test Method for Surface Burning Characteristics of BuildingMaterials

Code of practice for overall thermal transfer value in buildings

Code of practice for fire resisting construction

Austenitic stainless and heat-resisting steels

Specification for rigid expanded polyvinyl chloride for thermalinsulation purposes and building applications

Specification for rigid phenolic foam (PF) for thermal insulation D,HEC,Tin the form of slabs and profiled sections

Thermal insulation materials - magnesia preformed insulation

Thermal insulation materials - calcium silicate preformedinsulation

Thermal insulation materials - metal mash faced man-mademineral fibre mattresses

Thermal insulation materials - bonded preformed man-mademineral fibre pipe sections

Thermal insulation materials - specification for bonded man-made mineral fibre slabs

Thermal insulation materials - finishing materials, hard settingcomposition, self-setting cement and gypsum plaster

A

A

A,D,Ep,HEC,T

AAHK,HEC,Hy,MTRC

MTRC

MTRC

MTRC

A,B,Ep,Em,H,HEC

A,BAEm,H,HEC?T

H

D,HEQT

PSS

PSS

PSS

PSS

TS

TS

TS

PSS

PSS

PDS

PDS

PDS

D,HEC,T

D,HEQT

D,HEC9T

D,HEC,T

D,HEC,T

D,HEC,T

PDS

PDS

PDS

PDS

PDS

PDS

-35-



D,HEC

A,D,HEC,T

D,HEC,T

A,D,EmJUiEC,MTRC,T

A,D,HEC,T

MTRC

A,D,Em,H,HEC,MTRC

A,HEC

MTRC

MTRC

MTRC

A,CJXHm,ILHKl\HyXW

AXM^HmJiJUU1,Hy/IWV

AJ),IIy;i"AV

A J ' D . H m l l IiI-<"IK/I

Aj)jn:c.iis.r,\v

A,Bj:3J1,l!KCJIy;T,W

TYPE

TS

PDS

PDS

PSS

PDS

PDS

PSS

TS

TR

OS

TS

TS

PDS

PDS

PDS

PDS

PDS

PDS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

BUILDINGS

DRAINAGESERVICES

DRAINAGESERVICES

DRAINAGESERVICES

DRAINAGESERVICES

DRAINAGESERVICES

DRAINAGESERVICES

Thermal Insulation

Thermal Insulation

Thermal Insulation

Thermal Insulation

Thermal Insulation

Thermal Insulation

Thermal Insulation

Thermal Insulation

Thermal Insulation

Thermal Insulation

Thermal Insulation

Thermal Insulation

Drainage

Drainage

Drainage

Drainage

Drainage

Drainage

BS 4790

BS 5241: Parti

BS 5241: Part 2

BS 5422

BS 5803

BS 5803: Parti

BS 5970

BS874

CAP 123

UL

UL 1479

UL 2079

AASHTODesignation M252

BS1194

BS 1196

BS 2760

BS 435

BS437

1987

1994

1991

1990

1985(1994)

1992

1973(1980)

1981

1969

1989

1973

1975(1993)

1978

Method for determination of the effects of a small source ofignition on textile floor coverings (hot metal nut method)

Specification for sprayed foam thermal insulation appliedexternally

Specification for dispensed foam for thermal insulation orbuoyancy applications

Method for specifying thermal insulating materials on pipes,ductwork and equipment (in the temperature range -40°C to+700°C)

Thermal insulation for use in pitched roof spaces in dwellings

Man-made mineral wool thermal insulation mats

Code of Practice for thermal insulation of pipework andequipment (in the temperature range -100°C to +87°C)

Methods for determining thermal insulating properties withdefinitions of thermal insulating terms

Building (energy efficiency) regulations

Fire Resistance Directory (Latest edition)

Fire Tests of Through-Penetration Firestopping

Tests for Fire Resistance of Building Joint Systems

Standard specification for corrugated polyethylene drainagetubing

Concrete porous pipes for undcr-drainage

Specification for clayware field drain pipes and junctions

Specification for pitch-impregnated fibre pipes and fittings forbelow and above ground drainage

Specification for dressed natural stone kerbs, channels,quadrants and setts

Specification for cast iron spigot and socket drainpipes andfittings

- 3 6 -



DRAINAGESERVICES

DRAINAGESERVICES

DRAINAGESERVICES

DRAINAGESERVICES

DRAINAGESERVICES

DRAINAGESERVICES

DRAINAGESERVICES

DRAINAGESERVICES

DRAINAGESERVICES

DRAINAGESERVICES

DRAINAGESERVICES

DRAINAGESERVICES

DRAINAGESERVICES

DRAINAGESERVICES

Drainage

Drainage

Drainage

Drainage

Drainage

Drainage

Drainage

Outfall

Sewerage

Sewerage

Sewerage

Sewerage

Sewerage

Sewerage

BS 4660

BS 4962

BS497

BS 4660

BS 5255

BS534

BS 5480

1989

1989

1976

BS 497: Parti 1976

BS 6087 1990

BS 6367 1983

CAP 123

BS 8005: Part 4 1987

1989

1989

1990

1990

BS 5480: Parti 1977

BS 5480: Part 2 1982

Specification for unplasticized polyvinyl chloride (PVC-U)pipes and plastics fittings of nominal sizes 110 and 160 for belowground gravity drainage and sewerage

Specification for plastics pipes and fittings for use as sub-soilfield drains

A,B,C,D,H,HEC, PDSHy,MTRC,T,W

A,D,H,HEC,Hy, PDSMTRC,T,W

Specification for manhole covers, road gully, gratings and frames A,D,HEC,Hy,T, W PDSfor drainage purposes

Specification for manhole covers, road gully gratings and frames A,D,H,HEC,Hy,T,W PDSfor drainage purposes - cast iron and cast steel

Specification for flexible joints for grey or ductile cast irondrainpipes and fitting (BS 437) and for discharge and ventilatingpipes and fittings (BS 416)

Code of practice for drainage of roofs and paved areas

Building (Standards of Sanitary Fitments, Plumbing, DrainageWorks and Latrines) Regulations, Part IV, Drainage Works

Guide to design and construction of outfalls

A,D,H,HEC,Hy,T PDS

A,D,HEC,Hy,T,W PSS

D,Ep,H,HEC,T

Specification for unplasticized polyvinyl chloride (PVC-U) A,B,C,D,H,HEC,pipes and plastics fittings of nominal sizes 110 and 160 for below Hy,MTRC,T,Wground gravity drainage and sewerage

TR

PSS

PDS

Specification for thermoplastics waste pipe and fittings A,D,H,HEC,Hy,T PDS

Specification for steel pipes, joints and specials for water and A,C,D,Em,H,HEC, PDSsewage Hy,MTRC,T,W

Specification for glass reinforced plastics (GRP) pipes Joints and A,D,Ep,H,HEC,T, W PDSfittings for use for water supply or sewerage

Dimensions, materials and classification

Design and performance requirements

A,D,Ep,H,HEC5T PDS

A,D,Ep,H,HEC,T PSS

-37-



DRAINAGESERVICES

DRAINAGESERVICES

DRAINAGESERVICES

DRAINAGESERVICES

DRAINAGESERVICES

DRAINAGESERVICES

DRAINAGESERVICES

DRAINAGESERVICES

DRAINAGESERVICES

ELECTRICAL &MECHANICAL






Sewerage

Sewerage

Sewerage

Sewerage

Sewerage

Sewerage

Sewerage

Sewerage

Sewerage

Conveyors

Fixed ElectricalInstallations





BS5481

BS 8005

BS 8005: Part 0

BS 8005: Part 1

BS 8005: Part 2

BS 8005: Part 3

BS 8005: Part 4

BS EN 598

DSD

JIS B8805

BS5311

BS 88: Part 1

BS 88: Part 3.1

BS 88: Section 2.1

BS EN 60269-1

1977

1987

1987

1987

1989

1987

1995

1987

1976

1996

1988

1995

1988

1994

1977(1989) Specification for unplasticized PVC pipe and fittings for gravity A,D,H,HEC,Hy,sewers " " ' MTRCJ,W

PDS

Sewerage

Introduction and guide to data sources and documentation

Guide to new sewerage construction

Guide to pumping stations and pumping mains

Guide to sewers in tunnel

Guide to design and construction of outfalls

Ductile iron pipes, fittings, accessories and their joints forsewerage applications. Requirements and test methods

General specification for sewage plant installations. Issue No. 2. A,Em

Method of calculation for rubber belt conveyor

High-Voltage Alternating-Current Circuit Breakers

A,D,Ep,H,HEC,Hy, OST,W

A,D,Ep,H,HEC,T,W OS

A,AAI IK,D,Ep,H,HEC,Hy,MTRC\T,W

A,D,Ep,H,HEC,T

AAEpJiHEC/F

A,D,Ep,HJIEC;i

A,CJ}JiHIvC\T

A, Em

IIEC

AABKJ1ECW

PSS

PSS

PSS

PSS

PDS

PDS

PSS

PDS

General Requirement IIEC

Supplementary Requirements for Fuses I -se by ! 'nskilled I UiVPersons (Fuses Mainly for Household and Similar Application)

Specification for Fuses for Use by Authorized Persons (MainK I l\i( *for Industrial Application)

PDS

PDS

PDS

General Requirements A,AAlIRj;)J.vin»If,H PDSEC

- 3 8 -



TYPE








ELECTRICAL <feMECHANICAL










Fuel DispensingEquipment

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

BS EN 60269-2 1995

BS EN 60269-3 1995

IEC 60422

BS 2654

BS 89: Part 1

BS 89: Part 2

BS 89: Part 3

BS 89: Part 4

BS 89: Part 5

BS 89: Part 6

1989

1989

BS 5501: Parti 1977

BS 5501: Part 2 1977

BS 5501: Part 4 1977

BS 5501: Part 5 1977

BS 5501: Part 6 1977

1990

1990

1990

1990

1990

1990

Supplementary Requirements for Fuses for Use by Authorized A,AAHK,D,Em,H,H PDSPersons (Fuses Mainly for Industrial Application) EC,W

Supplementary Requirements for Fuses Used by Unskilled HECPersons (Fuses Mainly Use by Unskilled Persons (Fuses Mainlyfor Household and Similar Applications)

Supervision and Maintenance Guide for Insulating Mineral HECInsulating Oils in Electrical Equipment

Specification for Manufacture of Vertical Steel Welded Non- HECRefrigerated Storage Tanks with Butt Welded Shells for thePetroleum Industry

General Requirements

Oil Immersion 'o!

Power Filling 'q'

Flameproof Enclosure 'd'

Increased Safety 'e'

Specification for Definitions and General RequirementsCommon to All Parts

Specification for Special Requirements for Ammeters andVoltmeters

Specification for Special Requirements for Wattmeters andVarmeters

Specification for Special Requirements for Frequency Meters

Specification for Special Requirements for Phase Meters, Power HECFactor Meters and Synchroscopes

Specification for Special Requirements for Ohmmeters(Impedance Meters) and Conductance Meters

PDS

PSS

PDS

A,D,Em,HEC,Hy PDS

A,D,Em,HEC5Hy PDS

A,D,Em3HEC,Hy PDS

A,D,Em,HEC,Hy PDS

A,D,Em,HEC,Hy PDS

HEC

HEC

HEC

HEC

HEC

HEC

PDS

PDS

PDS

PDS

PDS

PDS

-39-


















Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Motorised Drives &Machinery


Substation

Substation

Substation

Substation

Substation

BS 89: Part 7

BS 89: Part 8

BS 89: Part 9

IEC 38

IEC 60156

IEC 60214

IEC 60289

IEC 60751

IEC 34-11

IEC 54-11

IEC 1024-1-1

IEC 230

IEC 270

IEC 60-1

IEC 60-2

1990

1990

1990

1975

1995

1989

1988

1983

1978

1993

1981

1973

1973

Specification for Special Requirements for Multi-Function HECInstruments

Specification for Special Requirements for Accessories HEC

Recommended Test Methods HEC

IEC standard voltages HEC

Insulating Liquids - Determination of the Breakdown Voltage At HECPower Frequency - Test Method

On-Load Tap-Changer

Reactors

Industrial Platinum Resistance Thermometer Sensors

HEC

HEC

HEC

Rotating Electrical Machines — Built-in Thermal Protection HEC

Rotating Electrical Machines Build-in Thermal Protection HEC

Protection of Structures Against Lightning - Part 1: General HECPrinciples - Section 1: Guide A: Selection of Protection Levelsfor Lightning Protection Systems

Impulse tests on cables and their accessories

Partial Discharge Measurements

HEC

HEC

High Voltage Test Techniques - General Definitions and Test HECRequirements

High Voltage Test "Techniques - Test Procedures HBC

PDS

PDS

TS

OS

TS

PDS

PDS

PDS

PDS

PDS

PSS

TS

TS

TS

TS

-40-

















Substation

Substation

Substation

Substation

Substation

Substation

Substation

Substation

Substation

Substation

Substation

Substation

Substation

Substation

IEC 60-3

IEC 60-4

IEC 60060-2

IEC 60071-1

IEC 60071-2

IEC 60085

IEC 60086-1

IEC 60086-2

IEC 60086-3

IEC 60086-4

IEC 60622

IEC 60623

IEC 60871-1

1976

1977

1994

1993

1996

1984

1996

1997

1995

1996

1988

1990

1997

High Voltage Test Techniques - Measuring Devices HEC

High Voltage Test Techniques - Application Guide for HECMeasuring Devices

High Voltage Test Techniques : Measuring Systems HEC

Insulation Co-ordination : Definitions, Principles and Rules HEC

Insulation Co-ordination - Part 2: Application Guide

Thermal Evaluation and Classification of Electrical Insulation HEC

Primary Batteries: General

Primary Batteries : Specification Sheets

Primary Batteries : Watch Batteries

Primary Batteries : Safety Standard for Lithium Batteries

Sealed Nickel-Cadmium Prismatic Rechargeable Single Cells HEC

Vented Nickel-Cadmium Prismatic Rechargeable Single Cells HEC

Shunt Capacitors for AC. Power Systems Having A RatedVoltage Above 1000 V : General Performance, Testing andRating - Safety Requirements - Guide for Installation andOperation

TS

TS

TS

PSS

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

PSS

PSS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

IEC 60871-2 1987 Shunt Capacitors for AC. Power Systems Having A RatedVoltage Above 660 V : Endurance Testing

HEC PDS

- 4 1 -
















Substation

Substation

Substation

Substation

Substation

Substation

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

IEC 60871-3

IEC 60871-4

IEC 60896-1

IEC 60896-2

IEC 61024-1

IEC 61024-1-2

BS 5227

BS5419

BS EN 60439-3

BS EN 60439-4

BS EN 60439-5

ESI 37-2

IEC 157-1

1996

1996

1987

1995

1990

1998

1975

1977

1991

1991

1996

1990

1973

Shunt Capacitors for AC. Power Systems Having A Rated HECVoltage Above 1000 V : Protection of Shunt Capacitors andShunt Capacitor Banks

Shunt Capacitors for Ac Power Systems Having A Rated Voltage HECAbove 1000 V : Internal Fuses

Stationary Lead-Acid Batteries - General Requirements andMethods of Test. : Vented Types

HEC

Stationary Lead-Acid Batteries - General Requirements and Test IffiCMethods : Valve Regulated Types

Protection of Structures Against Lightning : General Principles HEC

Protection of Structures Against Lightning : General Principles -Guide B - Design, Installation, Maintenance and Inspection ofLightning Protection Systems

A.C. metal-enclosed switchgear and controlgcar of rated voltageabove ikV and up to and including 72.5kV

Air-break switches, air break disconnectors, air-break switchdisconnectors and fuse-combination units for voltages up to andincluding 1000V ax. and 1200V d.c.

Particular requirements for Low-Voltage Switchgear andControlgear Assemblies Intended to be Installed in places WhereUnskilled Persons have Access to Their Use. DistributionBoards

Particular Requirements for Assemblies for Construction Sites(ACS)

Particular Requirements for Assemblies Intended to Be InstalledOutdoors in Public Places, Cable Distribution Cabinets (CDCs)for Power Distribution in Networks

Factory-built assemblies of switchgear and controlgear forvoltages up to and including 1000V a.c. and 1200V d.c.

Low Voltage Switchgear and Controlgear - Circuit Breakers

I IEC

HEC

HEC

HiiEC

PDS

PDS

TS

TS

PSS

PSS

PDS

PDS

PDS

HEC

.HEC

HEC

HEC

PDS

PDS

PDS

PDS

-42-



















Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

IEC298 1990

IEC 439-1 1985

IEC 60099-1 1991

IEC 60255

IEC 60255-03 1989

IEC 60255-06 1988

IEC 60255-08 1990

IEC 60255-16 1982

IEC 60255-18 1982

IEC 60255-19 1983

IEC 60255-19-1 1983

IEC 60255-20 1984

IEC 60255-21-1 1988

IEC 60255-21-2 1988

IEC 60255-21-3 1993

IEC 60255-22-1 1988

A.C. metal-enclosed switchgear and controlgear for rated voltage HECabove lkV and up to and including 72.5kV

Low-voltage switchgear and control gear assemblies HEC

Surge Arresters : Non-Linear Resistor Type Gapped Arresters for HECAC. Systems

Electrical Relays HEC

Single Input Energizing Quantity Measuring Relays with HECDependent Or Independent Time

Measuring Relays and Protection Equipment HEC

Thermal Electrical Relays HEC

Impedance Measuring Relays HEC

Dimensions for General Purpose All-Or-Nothing Relays HEC

Sectional Specification: Electromechanical All-Or-Nothing HECRelays of Assessed Quality

Blank Detail Specification: Electromechanical All-Or-Nothing HECRelays of Assessed Quality - Test Schedules 1, 2 and 3

Protection (Protective) Systems HEC

Vibration, Shock, Bump and Seismic Tests on Measuring Relays HECand Protection Equipment: Vibration Tests (Sinusoidal)

Shock and Bump Tests HEC

Seismic Tests HEC

Electrical Disturbance Tests for Measuring Relays and HECProtection Equipment: 1 MHz Burst Disturbance Tests"

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

TS

PDS

TS

TS

TS

TS

-43-


















Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

IEC 60255-22-2

IEC 60255-22-3

IEC 60255-22-4

IEC 60255-23

IEC 60255-5

IEC 60265-1

IEC 60269-3-1

IEC 60269-4

IEC 60270

IEC 60273

IEC 60282-1

IEC 60282-2

IEC 60439

IEC 60439-1

IEC 60439-2

1996

1989

1992

1994

1977

1998

1994

1986

1981

1990

1998

1997

1992

1987

Electrostatic Discharge Tests

Radiated Electromagnetic Field Disturbance Tests

Fast Transient Disturbance Test

Contact Performance

Insulation Tests for Electrical Relays

HEC

HEC

HEC

HEC

HEC

High-Voltage Switches t : Switches for Rated Voltages Above 1 HECkV and Less Than 52 kV

Supplementary Requirements for Fuses for Use by Unskilled HECPersons (Fuses Mainly for Household and Similar Applications)


Partial Discharge Measurements HEC

Characteristic of Indoor and Outdoor Post Insulators for Systems HECwith Nominal Voltages Greater Than 1000 v

High-Voltage Fuses - Part 1: Current-Limiting Fuses

High-Voltage Fuses - Part 2: Expulsion Fuses

Low-Voltage Switchgear and Controlgear Assemblies

Type-Tested and Partially Type-Tested Assemblies

Particular Requirements for Busbar Trunking Systems(Bus ways)

HEC

HEC

HEC

HEC

HEC

TS

TS

TS

PDS

TS

PDS

PDS

PDS

TS

PDS

PDS

PDS

PDS

PDS

PDS

-44-

















Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

IEC 60439-3

IEC 60439-4

IEC 60439-5

IEC 60466

IEC 60694

IEC 60947

IEC 60947-1

IEC 60947-2

IEC 60947-3

1990

1990

1996

1987

1996

1996

1995

1998

IEC 60947-4-1 1990

IEC 60947-4-2 1995

IEC 60947-5-1 1997

IEC 60947-5-2 1997

IEC 60947-5-4 1996

Particular Requirements for Low-Voltage Switchgear and HECControlgear Assemblies Intended to Be Installed in Places WhereUnskilled Persons Have Access for Their Use - DistributionBoards

Particular Requirements for Assemblies for Construction Sites HEC(Acs)

Particular Requirements for Assemblies Intended to Be Installed HECOutdoors in Public Places - Cable Distribution Cabinets (CDCs)for Power Distribution in Networks

AC. Insulation-Enclosed Switchgear and Controlgear for Rated HECVoltages Above 1 kV and Up to and Including 38 kV

Common Specifications for High-Voltage Switchgear and HECControlgear Standards

Low-Voltage Switchgear and Controlgear HEC

General Rules HEC

Circuit-Breakers HEC

Switches, Disconnectors, Switch-Disconnectors and Fuse- HECCombination Units

Contactors and Motor-starters HEC

AC Semiconductor Motor Controllers and Starters HEC

Control Circuit Devices and Switching Elements : HECElectromechanical Control Circuit Devices

Proximity Switches HEC

Method of Assessing the Performance of Low Energy Contacts. HECSpecial Tests

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

TS

-45-



















Transformer

Transformer

Transformer

Transformer

Transformer

Transformer

Transformer

Transformer

Transformer

Transformer

Transformer

Transformer

Transformer

Transformer

Transformer

Transformer

BS EN 60742 1996

IEC 185

IEC 186

IEC 354

IEC 60044

IEC 60044-1

IEC 60044-2

IEC 60044-6

IEC 60076-1

IEC 60076-2

IEC 60076-3

IEC 60076-5

IEC 60076-8

IEC 60296

IEC 606

1969

1972

1996

1997

1992

1993

1993

1980

IEC 60076-3-1 1987

1976

1997

1982

1978

Isolating Transformers and Safety Isolating Transformers. HECRequirements

Current transformers

Voltage transformers

Loading Guide for Oil-Immersed Transformers

Instruments Transformers

Current Transformer

Inductive Voltage Transformer

Requirement for Protective Current Transformers for Transient HECPerformance

Power Transformers : General

Power Transformers : Temperature Rise

Power Transformers : Insulation Levels and Dielectric Tests HEC

Power Transformers. External Clearances in Air

Power Transformers. : Ability to Withstand Short-Circuit

Power Transformers : Application Guide

Specification for Unused Mineral Insulating Oils forTransformers and Switchgear

Application guide for Power Transformers

PDS

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

TS

OS

PDS

PSS

PDS

PSS

-46-



HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

AAHK,HEC

HEC

TYPE

PDS

PDS

PDS

PSS

PDS

PDS

PDS

PSS

PDS

PSS

PDS

TS















Transformer

UPS & EmergencyGenerators









Wiring & Cables

Wiring & Cables

IEC 60726

IEC 60146

IEC 60146-1-1

IEC 60146-1-2

IEC 60146-1-3

IEC 60146-2

IEC 60146-3

IEC 60146-4

IEC 60146-5

IEC 60146-6

BS 6360

1982

1991

1991

1991

1974

1977

1986

1988

1992

1991

BS 6469: Part 1.1 1992

Wiring & Cables BS 6469: Part 4.2 1992

Wiring & Cables BS 6469: Part 5.1 1992

Dry-Type Power Transformers

Semiconductor Convertors

General Requirements and Line Commutated Convertors:Specifications of Basic Requirements

Application Guide

Transformers and Reactors

Semiconductor Self-Commutated Convertors

Semiconductor Direct D.c. Convertors (DC. ChopperConvertors)

Method of Specifying the Performance and Test Requirements of HECUninterruptible Power Systems

Switches for Uninterruptible Power Systems (Ups Switches)

Application Guide for the Protection of SemiconductorConvertors Against Overcurrent by Fuses

Specification for Conductors in Insulated Cables and Cords

Insulation and Sheathing Materials of Electric Cables : Methods HECof Test for General Application : Measurement of Thickness andOverall Dimensions. Tests for Determining the MechanicalProperties

GeinginAir. Measurement of Mass Increase. Long-Term HECStability Test. Test Method for Copper-Catalysed OxidativeDegradation

Drop-point. Separation of oil. Lower temperature brittleness. HECTotal acid number. Absence of corrosive components.Permittivity at 23 C. D.C. resistivity at 23 C and 100 C

TS

TS

-47-



















Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

BS 7655 1993

BS 7655: Part 1.1 1993

BS 7655: Part 1.2 1993

BS 7655: Part 1.3 1993

BS 7655: Part 1.4 1993

BS 7655: Part 1.5 1993

BS 7655: Part 1.6 1993

BS 7655: Part 10.1 1996

BS 7655: Part 2.1 1993

BS 7655: Part 2.2 1993

BS 7655: Part 2.3 1993

BS 7655: Part 2.4 1993

BS 7655: Part 2.5 1993

BS 7655: Part 2.6 1993

BS 7655: Part 3.1 1993

BS 7655: Part 3.2 1993

HEC

Specification for Insulating and Sheathing Materials for Cables HEC

Elastomeric Insulating Compounds Harmonized Types

General 90°C Application

XLPE

Oil Resisting Types

Flame Retardant Composites

Coil End Lead Types

Polyethylene Sheathing Compounds : Thermoplastic Medium HECDensity Polyethylene (MDPE) Sheathing Compound

Elastomeric Sheathing Compounds Harmonized Types

Heat Resisting Types

General Application

Welding Cable Covering

Sheathing Compounds Having Low Smoke and Acid GasEmission for General Applications

Sheathing Compounds for Ship Wiring and OffshoreApplications

PVC Insulating Compounds Harmonized Types

Hard Grade Types

HEC

HEC

HEC

HEC

HEC

PDS

PDS

PDS

PDS

PDS

PDS

HEC

HEC

HEC

HEC

HEC

HKC

HEC

HHC

HEC

HEC

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

- 4 8 -

















Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

BS 7655: Part 4.1

BS 7655: Part 4.2

BS 7655: Part 4.3

BS 7655: Part 5.1

BS 7655: Part 6.1

IEC 183

IEC 228

IEC 287

IEC 332-3

IEC 502

IEC 60055-1

IEC 60055-2

IEC 60141-1

IEC 60227

1993

1993

1993

1993

1993

1984

1982

1982

1994

1997

1981

1993

HECPVC Sheathing Compounds Harmonized Types

General Application

Special Applications RF Cables

Harmonized cross-linked types

General application Thermoplastic Types

Guide to the selection of high-voltage cables

Conductors of insulated cables

Calculation of the continuous current rating of cables (100% load HECfactor)

Tests on bunched wires or cables

Extruded solid dielectric insulated power cables for ratedvoltages from lkV up to 30kV

Paper-Insulated Metal-Sheathed Cables for Rated Voltages Up HECto 18/30 kV (With Copper Or Aluminium Conductors andExcluding Gas-Pressure and Oil-Filled Cables): Tests on Cablesand Their Accessories

General and Construction Requirements

Tests on Oil-Filled and Gas-Pressure Cables and TheirAccessories : Oil-Filled, Paper-Insulated, Metal-SheathedCables and Accessories for Alternating Voltages Up to andIncluding 400 kV

Polyvinyl Chloride Insulated Cables of Rated Voltages Up to andIncluding 450/750 V

HEC

HEC

PDS

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

PDS

PDS

PDS

PDS

PSS

PDS

OS

TS

PDS

TS

PSS

TS

- 4 9 -








ELECTRICAL 8cMECHANICAL











Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

IEC 60227-1

IEC 60227-2

IEC 60227-3

IEC 60227-4

IEC 60227-5

IEC 60227-6

IEC 60227-7

IEC 60228

IEC 60245

IEC 60245-1

IEC 60245-2

IEC 60245-3

IEC 60245-4

IEC 60245-5

IEC 60245-6

IEC 60245-7

1998

1997

1997

1997

1998

1985

1995

1978

1994

1994

1994

1994

1994

1994

1994


Test Methods

HEC

HEC

Polyvinyl Chloride Insulated Cables of Rated Voltages Up to and HECIncluding 450/750 V : Non-Sheathed Cables for Fixed Wiring

Sheathed Cables for Fixed Wiring

Flexible Cables (Cords)

Lift Cables and Cables for Flexible Connections

HEC

HEC

HEC

Flexible Cables Screened and Unscreened with Two Or More HECConductors

Conductors of Insulated Cables HEC

Rubber Insulated Cables - Rated Voltages Up to and Including HEC450/750 V


Test Methods

Heat Resistant Silicone Insulated Cables

Cords and Flexible Cables

Lift Cables

Arc Welding Electrode Cables

HEC

HEC

HEC

HEC

HEC

I IEC

Heat Resistant Ethvlene-Vinvl Acetate Rubber Insulated Cables I IEC

PDS

TS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

TS

PDS

PDS

PDS

PDS

PDS

-50-



HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

TYPE

PDS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

TS

TS

PDS

PDS
















Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

IEC 60245-8

IEC 60287

IEC 60287-1-1

IEC 60287-1-2

IEC 60287-2-1

IEC 60287-2-2

IEC 60287-3-1

IEC 60287-3-2

IEC 60332-1

IEC 60332-3

IEC 60420

IEC 60502-1

IEC 60502-2

IEC 60502-2

IEC 60502-4

1998

1994

1993

1994

1995

1995

1995

1993

1992

1990

1997

1997

1997

1997

Cords for Applications Requiring High Flexibility

Electric Cables - Calculation of the Current Rating

Current Rating Equations (100% Load Factor) and Calculation HECof Losses - Section 1: General

Sheath Eddy Current Loss Factors for Two Circuits in FlatFormation

Calculation of Thermal Resistance

A Method for Calculating Reduction Factors for Groups ofCables in Free Air, Protected From Solar Radiation

Sections on Operating Conditions : Reference OperatingConditions and Selection of Cable Type

Economic Optimization of Power Cable Size

Tests on Electric Cables Under Fire Conditions : Test on ASingle Vertical Insulated Wire Or Cable

Tests on Electric Cables Under Fire Conditions : Tests onBunched Wires Or Cables

High-Voltage Alternating Current Switch-Fuse Combinations HEC

Power Cables with Extruded Insulation and Their Accessoriesfor Rated Voltages From lkV (Urn = 1,2 kV) Up to 30 kV (Urn =36 kV): Cables for Rated Voltages of 1 kV (Urn = 1,2 kV) and 3kV (Urn = 3,6 kV)

Power Cable with extruded insulation and their accessories for HECrated voltages from lkV up to 30kV

Cables for Rated Voltages From 6 kV (Urn = 7,2 kV) Up to 30 HECkV (Urn = 36 kV)

Test Requirements on Accessories for Cables with Rated HECVoltages From 6 kV (Urn = 7,2 kV) Up to 30 kV (Urn F 36 kV)

PDS

PDS

TS

-51 -

















Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Switchgear

IEC 60754-1

IEC 60754-2

IEC 60794-1

IEC 60794-2

IEC 60794-3

IEC 60840

IEC 60853-1

IEC 60874-0

IEC 60874-1

IEC 60874-1-1

IEC 60885-3

IEC 61244-1

IEC 61244-2

IEC 60099-3

1994

1991

1996

1989

1998

1988

1985

1988

1993

1994

1988

1993

1996

1990

Test on Gases Evolved During Combustion of Materials From HECCables : Determination of the Amount of Halogen Acid Gas

Determination of Degree of Acidity of Gases Evolved During the HECCombustion of Materials Taken From Electric Cables byMeasuring pH and Conductivity

Optical Fibre Cables : Generic Specification HEC

Product Specifications HEC

Duct, Buried and Aerial Cables - Sectional Specification HEC

Tests for Power Cables with Extruded Ins for Rated Volt Above HEC30kV (Um=36kv) Up to 150kV (Um=170kV)

Calculation of the Cyclic and Emergency Current Rating of HECCables. : Cyclic Rating Factor for Cables Up to and Including18/30(36) kV

Connectors for Optical Fibres and Cables. : Guide for the HECConstruction of Sectional Specifications

Connectors for Optical Fibres and Cables : Generic Specification HEC

Connectors for Optical Fibres and Cables : Blank Detail 11 ECSpecification - Environmental Categories

Electrical Test Methods for Electric Cables, Part 3: Test Methods HECfor Partial Discharge Measurements on Lengths of ExtrudedPower Cables

Long-Term Radiation Ageing in Polymers - Procedures for in- H'KCService Monitoring of Low-Voltage Cable Material

Determination of Long Term. Radiation Ageing in Polymers * HECPart 2: Procedures for Predicting Ageing At Low Dose Rates

Surge Arresters. : Artificial Pollution Testing of Surge Arresters HEC

TS

TS

PDS

PDS

PDS

TS

PSS

PDS

PDS

PDS

TS

PSS

PSS

TS

- 52 -


















Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

IEC 60099-4

IEC 60120

IEC 60137

IEC 60158-2

IEC 60158-3

IEC 60168

IEC 60265-2

IEC 60269

IEC 60269-1

IEC 60269-2

1991

1984

1995

1982

1985

1994

1988

1986

1986

IEC 60269-2-1 1988

IEC 60269-3

IEC 60687

1987

1992

IEC 60947-5-5 1997

IEC 60947-6-1 1998

Surge Arresters : Metal Oxide Surge Arresters Without Gaps for HECAC. Systems

Dimensions of Ball and Socket Couplings of String Insulator HECUnits

Insulated Bushings for Alternating Voltages Above 1000 V HEC

Low-Voltage Controlgear.: Semiconductor Contactors (Solid HECState Contactors)

Low-Voltage Controlgear.: Additional Requirements for HECContactors Subject to Certification

Tests on Indoor & Outdoor Post Insulators of Ceramic Material HECOr Glass for Systems with Nominal Voltages Greater Than1,000V

High-Voltage Switches. : High-Voltage Switches for Rated HECVoltages of 52 kV and Above

Low-Voltage Fuses HEC

General Requirements HEC

Supplementary Requirements for Fuses for Use by Authorized HECPersons (Fuses Mainly for Industrial Application)

Supplementary Requirements for Fuses for Use by Authorized HECPersons (Fuses Mainly for Industrial Application)


Alternating-Current Static Watt-Hour Meters for Active Energy HEC(Classes 0.2s and 0.5s)

Electrical Emergency Stop Device with Mechanical Latching HECFunction

Multiple Function Equipment: Automatic Transfer Switching HECEquipment

PDS

PDS

PDS

PDS

PDS

TS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

-53-


















Switchgear

Switchgear

Switchgear

Transformer

Transformer

Wiring & Cables

Wiring & Cables

Conveyors

Conveyors

Conveyors

Earthing Installations




Fixed ElectricalInstallation

IEC 60947-6-2

IEC 60947-7-1

IEC 60947-7-2

IEC 726

IEC 76

IEC 85

IEC 885

BS 2890

BS 4116: Part 1-4

ISO 340

(BS EN 20340:1993)

AS 1768

BS 4444

BS665I

BS 7430

BS 1363

1998

1989

1995

1982

1993

1984

1988

1989

1992

1988

1991

1989

1992

1991

1984

Control and Protective Switching Devices (Or Equipment) HEC(CPS)

Ancillary Equipment: Terminal Blocks for Copper Conductors HEC

Protective Conductor Terminal Blocks for Copper Conductors HEC

Dry Type Power Transformers

Power Transformers

HEC

HEC

Thermal evaluation and classification of electrical insulation HEC

Electrical Test Methods for Electric Cables HEC

Troughed belt conveyors HEC

Conveyor chains, their attachments and associated chain wheels A,Em

Conveyor belts. Flame retardation. Specifications and test AAIIKmethod

Lightning protection H

1989(1995) Guide to electrical earth monitoring and protective conductor Emproving

PDS

PDS

PDS

PDS

PDS

OS

TS

PDS

PDS

TS

PSS

PSS

Code of practice for protection of structures against lightning A, A Ai IK J >,Km,I i, PSSHI-X\Hy,MTRt\T,W

Code of practice for earthing A.AAHKJ),F,nUl PSSUv,MTR(,\r,W

Specification for 13A fused plugs and switched and unswitched AAHKJH-V, MTRCsocket-outlets

- 5 4 -



TYPE















Fixed ElectricalInstallation














BS EN 60309-2

BS 1361

BS 1362

BS 1363: Parti

BS 1363: Part 2

BS 1363: Part 3

BS 1363: Part 4

BS 196

BS 2754 (IEC60536)

BS 3036

BS 3676

BS 4573

BS 546

BS646

1992

1971

1973

1995

1995

1995

1995

1961

1976

1958(1992)

Specification for industrial plugs, socket-outlets and couplers fora.c. and d.c. supplies

Specification for Cartridge Fuses for AC. Circuits in Domesticand Similar Premises

Specification for General Purpose Fuse Links for Domestic andSimilar Purposes (Primarily for Use in Plugs)

13A Plugs, Socket-Outlets, Adapters and Connection Units :Specification for Rewirable and Non-Rewirable 13A FusedPlugs

Specification for 13A fused plugs and switched and unswitchedsocket-outlets

13A Plugs, Socket-Outlets, Adapters and Connection Units :Specification for Adapters

13 A Plugs, Socket-Outlets, Adapters and Connection Units :Specification for 13a Fused Connection Units Switched andUnswitched

Specification for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthingcontacts for single phase a.c. circuits up to 250 volts

Memorandum. Construction of electrical equipment forprotection against electric shock

Specification. Semi-enclosed electric fuses (ratings up to 100amperes and 240 volts to earth)

A,AAHK,D,Em,H,HEC

A,D,Em,HEC,MTRC,T

A,AAHK,D,Em,H,HEC,MTRC

HEC

A,D,Em

HEC

HEC

PDS

PDS

PDS

PDS

PDS

PDS

PDS

A,D,Em

A,AAHK,D,Em,HEQMTRC

A,D,Em,HEC,MTRC

Switches for household and similar fixed electrical installations AAHK,Em

1970( 1979) Specification for 2-pin reversible plugs and shaver socket-outlets AAHK

1950(1988) Specification. Two-pole and earthing pin plugs, socket-outlets A,AAHK,D,Em,and socket-outlet adaptors HEC

1958( 1991) Specification. Cartridge fuse-links (rated up to 5 amperes) for A,D5Em,MTRCa.c. and d.c. service

PDS

PSS

PDS

PDS

PDS

PDS

PDS

-55-



TYPE































BS 7264 Shunt capacitors for a.c. power systems having a rated voltage AAHKabove 1000 V

BS 88 Cartridge fuses for voltages up to and including 1000 V ax. and A,AAHK,D,Em,H,1500V d.c. MTRQW

BS 88: Part 4 1988(1992) Specification of supplementary requirements for fuse-links for A,D,Em,HECthe protection of semiconductor devices

BS 88: Part 5 1988(1992) Specification of supplementary requirements for fuse-links for A,D,Ern,HECuse in a.c. electricity supply network

BS 88: Part 6 1988(1992) Specification of supplementary requirements for fuses of A,AAHK,D,Em,Hcompact dimensions for use in 240/415 V a.c. industrial andcommercial electrical installations

BS 88: Section 2.2 1992

BS EN 50086-2-2 1996

BS EN 50086-2-3 1996

BS EN 50086-2-4 1994

BS EN 60127-6 1994

BS EN 60137 1996

BS EN 60269

BS EN 60309-1 1992

BS EN 60831

BS EN 60831-1 1994

Additional requirements for fuses with fuse links for bolted A,D,Em,H,HEC,Wconnections

Pliable Conduit Systems HEC

Flexible Conduit Systems HEC

Conduit Systems Buried Underground HEC

Fuse-holders for miniature cartridge fuse-links Em

Insulated bushings for alternating voltages above 1 kV AAHK

Low-voltage fuses AAHK

Plugs, Socket-Outlets and Couplers for Industrial Purposes : HECGeneral Requirements

Shunt power capacitors of the self-healing type for a.c. systems AAHK,IIhaving a rated voltage up to and including 1000 V

General. Performance, testing and rating. Safety requirements. AAHK,11Guide for installation and operation.

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

-56-



TYPE













ELECTRICAL 8cMECHANICAL


















BS EN 60831-2 1996

IEC 60079

IEC 60079-0

IEC 60079-1

1998

1998

IEC 60079-10 1995

IEC 60079-11 1991

IEC 60079-12 1978

IEC 60079-13 1982

IEC 60079-14 1996

IEC 60079-15 1987

IEC 60079-16 1990

IEC 60079-17 1996

IEC 60079-18 1992

IEC 60079-19 1993

IEC 60079-1A 1975

Ageing test, self-heating test and destruction test

Electrical Apparatus for Explosive Gas Atmospheres


AAHK,H

HEC

HEC

Construction and Verification Test of Flameproof Enclosures of HECElectrical Apparatus

Classification of Hazardous Areas HEC

Intrinsic Safety T HEC

Classification of Mixtures of Gases of Vapours with Air HECAccording to Their Maximum Experimental Safe Gaps andMinimum Igniting Currents

Construction and Use of Rooms Or Buildings Protected by HECPressurisation

Electrical Installations in Hazardous Areas (Other Than Mines) HEC

Electrical Apparatus with Type of Protection 'n' HEC

Artificial Ventilation for the Protection of Analyser(s) Houses HEC

Inspection and Maintenance of Electrical Installations in HECHazardous Areas (Other Than Mines)

Encapsulation 'm' HEC

Repair and Overhaul for Apparatus Used in Explosive HECAtmospheres (Other Than Mines Or Explosives)

Construction and Verification Test of Flameproof Enclosures of HECElectrical Apparatus - First Supplement: Appendix D: Method ofTest for Ascertainment of Maximum Experimental Safe Gap

TS

PDS

PDS

TS

OS

PDS

OS

PSS

PDS

PDS

PSS

PSS

PDS

PSS

TS

-57-



TYPE

































IEC 60079-2

IEC 60079-20

IEC 60079-4

IEC 60079-4A

IEC 60079-5

IEC 60079-6

IEC 60079-7

IEC 60614-1

IEC 60614-2-1

IEC 60614-2-2

IEC 60614-2-3

IEC 60614-2-4

IEC 60614-2-5

IEC 60614-2-6

IEC 60614-2-7

IEC 60884

1983

1996

1975

1970

1997

1995

1990

1994

1982

1980

1990

1985

1992

1992

1995

Electrical Apparatus, Type of Protection 'p' HEC

Data for Flammable Gases and Vapours, Relating to the Use of HECElectrical Apparatus

Method of Test for Ignition Temperature HEC

Method of Test for Ignition Temperature HEC

Powder Filling "q" HEC

Oil-Immersion 'o' HEC

Increased Safety 'E\ Consolidated Edition HEC

General Requirements HEC

Particular Specifications for Conduits. Section One: Metal HECConduits

Particular Specification for Rigid Plain Conduits of Insulating If ECMaterials

Pliable Conduits of Insulating Material HEC

Pliable Self-Recovering Conduits of Insulating Materials HEC

Flexible Conduits I IEC

Pliable Conduits of Metal Or Composite Materials HEC

Rigid Non-Thrcadablo Conduits of Aluminium Alloy HEC

Plugs and Socket-Outlets for Household and Similar Purposes. HBC

PDS

OS

TS

TS

PDS

PDS

PSS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

-58-



TYPE































IEC 60884-1 1994 General Requirements HEC

IEC 60884-2-1 1987

IEC 60884-2-2 1989

IEC 60884-2-4 1993

IEC 60884-2-5 1995

IEC 60884-2-6 1997

IEC 60079-3 1990

IEC 60884-2-3 1989

BS 649 1958

BS 7117: Part 1-3 1991

BS EN 1960 1997

IP

IP

IP

IP

Particular Requirements for Fused Plugs HEC

Particular Requirements for Socket-Outlets for Appliances HEC

Particular Requirements for Plugs and Socket-Outlets for Selv HEC

Particular Requirements for Adapters

Particular Requirements for Switched Socket-Outlets withInterlock for Fixed Electrical Installations

Spark-Test Apparatus for Intrinsically-Safe Circuits

Particular Requirements for Switched Socket-Outlets WithoutInterlock for Fixed Installations

The performance of reciprocating compression-ignition (diesel)engines, utilizing liquid fuel only, for general purposes

Metering pumps and dispensers to be installed at filling stationsand used to dispense liquid fuel

Specification for electrically bonded rubber hoses and hoseassemblies for dispensing petroleum based fuels

Latest Model code of safe practice for the petroleum industry : Part 6 -Pipeline safety code - Supplement

2nd Edition Model code of safe practice for the petroleum industry : Part 15 -Area classification code for petroleum installations

Latest Model code of safe practice for the petroleum industry : Part 2 -Marketing safety code : Chapter 3 - Design, construction andoperation of distribution installations

1998 Model code of safe practice for the petroleum industry : Part 21 -Guidelines for the control of hazards arising from staticelectricity

HEC

HEC

HEC

HEC

A

Em

A,Em

HEC

HEC

HEC

HEC

PDS

PDS

PDS

PDS

PDS

PDS

TS

PDS

PDS

PDS

PDS

PSS

PSS

PSS

PSS

-59-



TYPE



























Gates

Gates

Gates

Gates

IP

IP

IP

IP

IP

IP

IP

IP

IP

IP

IP

BS 3470

BS 4092

BS 4092: Part 1

BS 4092: Part 2

1993

3rd Edition

2nd Edition

2nd Edition

1987

1993

4th Edition

3rd Edition

7th Edition

2nd Edition

4th Edition

1975

1966

1966

Model code of safe practice for the petroleum industry : Part 18 - HECOccupational health

Model code of safe practice for the petroleum industry : Part 8 - HECDrilling and production safety code for offshore operations

Model code of safe practice for the petroleum industry : Part 13 - HECPressure piping systems examination

Model code of safe practice for the petroleum industry : Part 12 - HECPressure vessel systems examination

Model code of safe practice for the petroleum industry : Part 9 - HECLiquefied petroleum gas. Volume 1. Large bulk pressure storage& refrigerated LPG

Model code of safe practice for the petroleum industry : Part 19 - HECFire precautions at petroleum refineries and bulk storageinstallations

Model code of safe practice for the petroleum industry : Part 4 - HECDrilling & production safety code for onshore operation

Model code of safe practice for the petroleum industry : Part 3 - HECRefining safety code

Model code of safe practice for the petroleum industry : Part 1 - HECElectrical safety code

Model code of safe practice for the petroleum industry : Part 16 - HECTank cleaning safety code

Model code of safe practice for the petroleum industry : Part 6 -Pipeline safety code

Specification for field gates and posts

Specification for domestic front entrance gates

Metal gates

Wooden gates

HEC

A,D,HEC,Hy,T,W

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PDS

AJXHEC,Hv/!\W PDS

AjXHECilvXW PDS

AJXffBC,Hv/i;W PDS

- 60 -



















Gates

Gates

Gates

BS4951

BS 5709

EMSD

1973(1995) Specification for builders' hardware: lock and latch furniture(doors)

A,D,H,HEC,T PDS

1979

1995

Specification for stiles, bridle gates and kissing gates A,D,HEC,Hy,T,W PDS

Code of practice for installation of electrically operated sliding A,Em,Hgates, sliding glass doors and rolling shutters

Laundry Machinery BS 6246: Part 1 1987(1993) Methods for the assessment of the effect of rotary washingmachines on textiles

Em

Laundry Machinery BS 6246: Part 2 1983 Methods for the assessment of the effect of extracting machines Emon textiles

Laundry Machinery BS 6246: Part 5 1991 (1996) Methods for the assessment of the effect of shaped garmentfinishing machinery on textiles

Laundry Machinery BS ISO 7772-3 1996

Laundry Machinery BS ISO 7772-4 1996

Luminaires

Luminaires

Luminaires

Luminaires

Luminaires

Luminaires

Luminaires

Luminaires

BS 4533

BS 4533: Part 2 1979

BS 4533: Section 1990102.1

BS 4533: Section 1990102.10

BS 4533: Section 1990102.17

BS 4533: Section 1990102.2

BS 4533: Section 1990102.4

BS 4533: Section 1990102.5

Assessment of industrial laundry machinery by its effect ontextiles. Flatwork ironing machines

Batch drying tumblers on testiles

Luminaires

Detail requirements

Specification for fixed general purpose luminaires

Specification for portable child-appealing luminaires


Specification for portable general purpose luminaires


A, Em

Em

A,Em

PSS

TS

TS

TS

TS

TS

A,AAHK,HEC,Hy,T PDS,W

A,HEC,HyJ

A,HEC,Hy,T

Hy

Specification for luminaires for stage lighting, television, film Hyand photographic studios (outside and indoor)

A,HEC,Hy

Hy

A,HEC,Hy,T

PDS

PDS

PDS

PDS

PDS

PDS

PDS

-61-


















Luminaires

Luminaires

Luminaires

Luminaires

Luminaires

Luminaires

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous






1990 Specification for luminaires with built-in transformers for A,HEC,Hyfilament lamps

1990 Specification for portable luminaires for garden use Hy

1990 Specification for handlamps Hy

1990 Specification for photo and film luminaires (non-professional) Hy

1986 Specification for photometric characteristics of luminaires for Hyhospitals and health care buildings

BS 5225: Part 1 1975(1985) Photometric data for luminaires - Photometric measurements AAHK

89/336/EEC

BS 1042

BS142

BS 1432

BS 1433

BS 1434

1989 EEC Electromagnetic compatibility (EMC) directive

Measurement of fluid flow in closed conduits

Electrical protection relays

AAHK

AAHK

AAHK

1987

1970

Specification for copper for electrical purposes: high AAHKconductivity copper rectangular conductors with drawn or rollededges

Specification for copper for electrical purposes. Rod and bar AAHK

1985 (1991) Specification for copper for electrical purposes: copper sections AAHKin bars, blanks and segments for commutators

BS 1486: Part 1 & 1959(1982) Lubricating nipples and adaptors for use on machinery and AJXEm2 vehicles

BS 1650

BS 1780

1971 Specification for capacitors for connection to power-frequency AAHK,! Isystems

1985(1992) Specification for bourdon tube pressure and vacuum gauges AAHK

PDS

PDS

PDS

PDS

PDS

TS

OS

TS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

-62-



TYPE
















Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

BS 1977

BS 2757

BS 2898

BS 2954

BS3816

BS 4575: Parti

BS 4575: Part 2

BS 4575: Part 3

BS 4608

BS 4662

BS 4683

BS 4683: Parti

BS 4683: Part 2

BS 4828

BS 4944

1976(1991)

1986(1994)

1970(1985)

1989(1995)

1979

1987

1988

1970

1970(1989)

1971

1971

1985(1991)

1994

Specification for high conductivity copper tubes for electricalpurposes

Method for determining the thermal classification of electricalinsulation

Specification for wrought aluminium and aluminium alloys forelectrical purposes. Bars, extruded round tube and sections

Cinematography. Production and presentation. Screens andscreen luminance. Recommendations for screen luminance forthe projection of 16mm film

Specification for epoxy resin casting systems used for electricalinsulating applications at power .frequencies

Fluid power transmission and control systems - guide forhydraulic equipment and systems

Fluid power transmission and control systems - code of practicefor pneumatic equipment and systems

Fluid power transmission and control systems - specification for2-pin reversible plugs and shaver socket-outlets

Specification for copper electrical purposes. Rolled sheet, stripand foil

Specification for boxes for the enclosure of electrical accessories

Specification for electrical apparatus for explosive atmospheres

Classification of Maximum Surface Temperature HEC

The construction and testing of flameproof enclosures ofelectrical apparatus

1985(1991) Guide for partial discharge measurements

Tractors, machinery for agriculture and forestry, powered lawn Band garden equipment. Symbols for operator controls and otherdisplays

A,AAHK,Em,HKT

AAHK,Em

AAHK

AAHK

AAHK

A,AAHK,Em

A,Em

A,Em

HKT

A,AAHK,Em,HEC,Hy,MTRC,T

AAHK

PDS

TS

PDS

PSS

PDS

PSS

PSS

PDS

PDS

PDS

PDS

OS

AAHK,HEC

AAHK

B

PSS

TS

PDS

- 6 3 -



TYPE















Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

BS 5207

BS 5304

BS 5345

1975(1980) Specification for sulphur hexafluoride for electrical equipment AAHK,HEC

1988

1989

Code of Practice for safety of machinery A,AAHK,D,Em,MTRC

Code of practice for selection, installation and maintenance of A,AAHK,D,Em,electrical apparatus for use in potentially explosive atmospheres MTRC(other than mining applications or explosive processing &manufacture)

General recommendation

1976( 1991) Method of test for enclosure pressurization systems onagricultural tractors and seli-propelled machines

Electrical apparatus for potentially explosive atmospheres

Electrical apparatus for potentially explosive atmospheres

Electrical apparatus for potentially explosive atmospheres.Encapsulation 'm'

Specification for intrinsically safe electrical system T

Insulating varnishes containing solvent

Electricity meters

BS 5685: Part 1 1979(1992) Specification for Class 0.5, 1 and 2 single-phase and polyphase, AAHKsingle rate and multi-rate watt-hour meters

BS 5345: Part 1

BS 5389

BS5501

BS 5501: Part 7

BS 5501: Part8(EN 50028)

BS 5501: Part9(IEC 60079-11EN 50037)

BS 5629

BS 5685

1989

1976

1977

1988

1982

BS 5685: Part 2 1986

BS 5685: Parts 2-5& 8

Specification for single-phase coin-operated prepayment flat rate AAHKand two-part tariff watt-hour meters of Class 2 and fixed chargecollectors of Class 2

PDS

PSS

PSS

A,AAHK,D,Em,MTRC

AAHK

AAHK,HEC

A,D,Em,HEC,Hy

A,D,Em,HEC,Hy

A,D,Em,HEC,Hy

W

AAHK

AAHK

AAHK

PSS

TS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

Electricity meters A,Em PDS

- 6 4 -

















Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

BS5691

BS 5733

BS 5954

BS 5954: Part 3

BS 5992

BS 5992: Part 1

BS6018

BS 6037

BS6111

BS6129

BS 6290: Part 4

BS 6501: Parti

BS89

BS923

Guide for the determination of thermal endurance properties of AAHKelectrical insulating materials

1995 Specification for general requirements for electrical accessories AAHK

Dimensions of mechanical structures of the 482.6 mm (19 in) AAHKseries

1985 Specification for subracks and associated plug-in units AAHK

Electrical relays AAHK

1980 Specification for contact performance of electrical relays AAHK

1991 Method of test for accuracy and precision of mechanical AAHK

handpipettes of capacity 0.05 ml and above1990 Code of practice for permanently installed suspended access Hy

equipment

1981 (1988) Specification for reference coupler for the measurement of AAHKhearing aids using earphones coupled to the ear by means of earinserts

Code of practice for the selection and application of bellowsexpansion joints for use in pressure systems

AAHK

1987 (1993) Lead-acid stationary cells and batteries - Specification for lead- AAHKacid valve regulated sealed type

1991 Flexible metallic hose assemblies - Specification for corrugated AAHKhose assemblies

Direct acting indicating analogue electrical measuringinstruments and their accessories

Guide on high-voltage testing techniques

AAHK,HEC

AAHK

TS

PDS

PDS

PDS

PDS

PDS

TS

PSS

PDS

PSS

PDS

PDS

PDS

TS

-65-

















Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

BSEN 153 1996

BSEN 50014 1993

BSEN 50016 1996

BSEN 50017 1994

BSEN 50018 1995

BSEN 50019 1994

BSEN 50020 1995

BSEN 50081

BSEN 50081-2 1994

BS EN 50082

BSEN 50082-2 1995

BSEN 55011 1991

BSEN 55014

BSEN 55015 1993

Methods of measuring the energy consumption of electric mains AAHKoperated household refrigerators, frozen food storage cabinets,food freezers and their combinations, together with associatedcharacteristics

Electrical Apparatus for Potentially Explosive Atmospheres.General Requirements

Electrical Apparatus for Potentially Explosive Atmospheres.Pressurized Apparatus 'p'

Electrical Apparatus for Potentially Explosive Atmospheres.Flameproof Enclosure 'd'

Electrical Apparatus for Potentially Explosive Atmospheres.Flameproof Enclosure 'd'

Electrical Apparatus for Potentially Explosive Atmospheres.Increased Safety 'e'

Electrical Apparatus for Potentially Explosive Atmospheres.Intrinsic Safety V

Electromagnetic compatibility. Generic emission standard

Industrial environment AAHK

Electromagnetic compatibility. Generic immunity standard AAHK

Industrial environment AAHK

Specification for limits and methods of measurement of radio AAHKdisturbance characteristics of industrial, scientific and medical(ISM) radio-frequency equipment

Specification for limits and methods of measurement of radio A,A,AHK,Eminterference characteristics of household electrical appliances,portable tools and similar electrical apparatus

Limits and methods of measurement of radio interference AAHKcharacteristics of electrical lighting and similar equipment

TS

HEC

HEC

HEC

HEC

HEC

HEC

AAHK

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

TS

TS

TS

-66-


















Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

BS EN 55022 1995

BS EN 60061-2 1997

BS EN 60065 1998

BS EN 60073 1993

BS EN 60079-10 1996

BS EN 60079-14 1997

BS EN 60099-1 1994

BS EN 60155 1995

BS EN 60285

BS EN 60289

BS EN 60529

1995

1995

1992

BS EN 60529(IEC 1992529)

BS EN 60623

BS EN 60751

BS EN 60936

1996

1996

1993

Limits and methods of measurement of radio disturbance AAHK TScharacteristics of information technology equipment

Lampholders Em PDS

Safety requirements for mains operated electronic and relatedapparatus for household and similar general use

Basic and safety principles for man-machine interface, marking A,AAHK,Em,Hyand identification. Coding principles for indication devices andactuators

Electrical apparatus for explosive gas atmospheres -Classification of hazardous areas

Electrical installations in hazardous areas (other than mines)

Surge arrestors - Non-linear resistor type gap surge arrestors for AAHKa.c. systems

Glow-starters for fluorescent lamps

Alkaline secondary cells and batteries. Sealed nickel-cadmium AAHK PDScylindrical rechargeable single cells

Reactors AAHK PDS

Specification for classification of degrees of protection provided AAHK,Hy,MTRC OSby enclosures (IP code)

Specification for degree of protection by enclosures (IP Code) A,AAHK,D,Em,H, PSSHy,MTRC,T,W

A,AAHK,Em

A,AAHK,Em,Hy

A,Em

AAHK

AAHK

AAHK

PDS

PDS

OS

PDS

PDS

PDS

Vented nickel-cadmium prismatic rechargeable cells AAHK

Industrial platinum resistance thermometer sensors AAHK

Shipborne radar - Operational and performance requirements. AAHKMethods of test and required test results

PDS

PDS

TS

- 6 7 -


















Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

BS EN 60950 1992

BS EN 61010-1 1993

BS EN 61011

CAP 303

CAP 303

EMSD

HS(G)81

IEC 60027

IEC 60027-1

IEC 60027-3

IEC 60027-4

1993

1989

1992

1992

IEC60027-2B 1980

1989

1985

IEC 60050-121 1978

IEC 60050-131 1978

IEC 60050-131A 1982

Specification for safety of information technology equipment, AAHK,Emincluding electrical business equipment

Safety requirements for electrical equipment for measurement, A,Emcontrol and laboratory use

Electric fence energizers safety requirements for mains-operated Emelectric fence energizers

Radiation (Control of Radioactive Substances) Regulations

Radiation (Control of Irradiating Apparatus) Regulations

Code of Practice (Design, Manufacture and Installation of Aerial A,EmRopeway)

A code of safe practice - fairgrounds and amusement parks Em

Letter Symbols to Be Used in Electrical Technology HEC

General HEC

Second Supplement to Publication 60027-2 (1972) HEX

Logarithmic Quantities and Units HEC

Symbol for Quantities to Be Used for Rotating Electrical HECMachines

International Eiectrotechnical Vocabulary. Electromagnetisra HEC

International Eiectrotechnical Vocabulary. Electric and HECMagnetic Circuits

International Eiectrotechnical Vocabulary. First Supplement: HECElectric and Magnetic Circuits. : Polyphase Circuits andComponents

PDS

PDS

PDS

TR

TR

PSS

PSS

OS

OS

OS

OS

OS

OS

OS

OS

-68-


















Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

IEC 60050-151 1978

IEC 60050-161 1990

IEC 60050-191 1990

IEC 60050-212 1990

IEC 60050-221 1990

IEC 60050-301 1983

IEC 60050-321 1986

IEC 60050-351 1975

IEC 60050-371 1984

IEC 60050-411 1996

IEC 60050-421 1990

IEC 60050-426 1990

IEC 60050-431 1980

IEC 60050-436 1990

IEC 60050-446 1983

International Electrotechnical Vocabulary. Electrical andMagnetic Devices

International Electrotechnical Vocabulary. : ElectromagneticCompatibility

International Electrotechnical Vocabulary. : Dependability andQuality of Service

International Electrotechnical Vocabulary.: Insulating Solids,Liquids and Gases

International Electrotechnical Vocabulary. : Magnetic Materialsand Components

International Electrotechnical Vocabulary. : General Terms onMeasurements in Electricity : Electrical Measuring Instruments :Electronic Measuring Instruments

International Electrotechnical Vocabulary.: InstrumentTransformers

International Electrotechnical Vocabulary. Automatic Control

International Electrotechnical Vocabulary.: Telecontrol

Rotating Machinery

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

OS

OS

OS

OS

OS

OS

OS

OS

HEC

HEC

International Electrotechnical Vocabulary.: Power Transformers HECand Reactors

International Electrotechnical Vocabulary.: Electrical Apparatus HECfor Explosive Atmospheres

International Electrotechnical Vocabulary. Transductors HEC

International Electrotechnical Vocabulary.: Power Capacitors HEC

International Electrotechnical Vocabulary. Electrical Relays HEC

OS

OS

OS

OS

OS

OS

OS

- 6 9 -


















Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

IEC 60050-448 1995

IEC 60050-471 1984

IEC 60050-481 1996

IEC 60050-486 1991

IEC 60050-551 1982

IEC 60050-601 1985

IEC 60050-602 1983

IEC 60050-603 1986

IEC 60050-604 1987

IEC 60050-605 1983

IEC 60050-691 1973

IEC 60050-731 1991

IEC 60050-826 1982

IEC 60050-845 1987

IEC 60216

International Electrotechnical Vocabulary : Power System HECProtection

International Electrotechnical Vocabulary.: Insulators HEC

Primary Cells and Batteries HEC

International Electrotechnical Vocabulary : Secondary Cells and HECBatteries

International Electrotechnical Vocabulary. Power Electronics HEC

International Electrotechnical Vocabulary.: Generation, HECTransmission and Distribution of Electricity - General

International Electrotechnical Vocabulary. Generation, HECTransmission and Distribution of Electricity - Generation

International Electrotechnical Vocabulary.: Generation, HECTransmission and Distribution of Electricity - Power SystemsPlanning and Management

International Electrotechnical Vocabulary.: Generation, HECTransmission and Distribution of Electricity - Operation

International Electrotechnical Vocabulary. Generation, HECTransmission and Distribution of Electricity - Substations

International Electrotechnical Vocabulary. Tariffs for Electricity HEC

International Electrotechnical Vocabulary -: Optical Fibre HECCommunication

International Electrotechnical Vocabulary. Electrical HECInstallations of Buildings

International Electrotechnical Vocabulary'. Lighting HEC

Guide for the Determination of Thermal Endurance Properties of HECElectrical Insulating Materials.

OS

OS

OS

OS

OS

OS

OS

OS

OS

OS

OS

OS

OS

OS

TS

- 70 -

















Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

IEC 60216-1

IEC 60216-2

IEC 60216-3-1

IEC 60216-3-2

IEC 60216-4-1

IEC 60216-5

IEC 60243-1

IEC 60243-2

IEC 60243-3

IEC 60305

IEC 60372

IEC 60381-1

IEC 60381-2

IEC 60383-1

1990

1990

1990

1993

1990

1990

1998

1990

1993

1995

1984

1982

1978

1993

General Guidelines for Ageing Procedures and Evaluation of HECTest Results

Choice of Test Criteria HEC

Instructions for Calculating Thermal Endurance Characteristics - HECSection 1: Calculations Using Mean Values of NormallyDistributed Complete Data

E Median Time to End-Point (Equal Test Groups)

Ageing Ovens : Single-Chamber Ovens

Guidelines for the Application of Thermal EnduranceCharacteristics

HEC

HEC

HEC

Electrical Strength of Insulating Materials - Test Methods : Tests HECAt Power Frequencies

Additional Requirements for Tests Using Direct Voltage HEC

Additional Requirements for Impulse Tests HEC

Insulators for Overhead Lines with A Nominal Voltage Above HEC1000 V - Ceramic Or Glass Insulator Units for AC. Systems -Characteristics of Insulator Units of the Cap and Pin Type

Locking Devices for Ball and Socket Couplings of StringInsulator Units - Dimensions and Tests

HEC

Analogue Signals for Process Control Systems.: Direct Current HECSignals

Direct Voltage Signals HEC

Insulators for Overhead Lines with A Nominal Voltage Above HEC1000 V : Ceramic Or Glass Insulator Units for AC. Systems -Definitions, Test Methods and Acceptance Criteria

TS

TS

TS

TS

TS

TS

TS

TS

TS

PDS

PDS

OS

OS

TS

-71 -

















Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

IEC 60383-2

IEC 60413

IEC 60479-1

IEC 60479-2

IEC 60495

IEC 60628

IEC 60865-1

IEC 60865-2

IEC 60909-1

IEC 60909-2

IEC 60909-3

1993

1972

1994

1987

1993

1985

1993

1994

1991

1992

1995

IEC 68-2

ISO 1701

ISO 1701-0

1974

1984

Insulator Strings and Insulator Sets for AC. Systems - HECDefinitions, Test Methods and Acceptance Criteria

Expression of the Performance of Electrical and Electronic HECMeasuring Equipment

Effects of Current on Human Beings and Livestock : General HECAspects

Currents of Short Duration HEC

Single Sideband Power-Line Carrier Terminals HEC

Gassing of Insulating Liquids Under Electrical Stress and HECIonization

Short-Circuit Currents - Calculation of Effects : Definitions and HECCalculation Methods

Short-Circuit Currents - Calculation of Effects : Examples ofCalculation

HEC

Short-Circuit Current Calculation in Three-Phase AC. Systems : HECFactors for the Calculation of Short-Circuit Currents in Three-Phase AC. Systems According to IEC 909

Electrical Equipment - Data for Short-Circuit CurrentCalculations in Accordance with IEC 909 (1988)

HEC

Short-Circuit Current Calculation in Three-Phase AC. Systems : HECCurrents During Two Separate Simultaneous Single PhaseLine-To-Earth Short Circuits and Partial Short-Circuit CurrentsFlowing Through Earth

HV tester

A swivelling table - Ed. 3

HEC

HEC

Test conditions for milling machines with table of variable HECheight, with horizontal of vertical spindle ; General introduction

TS

PDS

OS

OS

PDS

PSS

OS

O

OS

OS

OS

PDS

OS

TS

-72-

















Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

ISO 1708

ISO 1984

ISO 1984-0

ISO 1985

ISO 1986

ISO 229

ISO 230-1

ISO 230-2

ISO 2407

ISO 2433

ISO 2772-1

ISO 2772-2

ISO 2773-1

ISO 2773-2

1989

1982

1984

1985

1985

1973

1986

1988

1984

1984

1973

1974

1973

1973

Acceptance conditions for general purpose parallel lathes -Testing of the accuracy

HEC

Acceptance conditions for milling machines with table of fixed HECheight with horizontal or vertical spindle - Testing of accuracy

Test conditions for milling machines with table of fixed height HECwith horizontal or vertical spindle - Part 0 : General introduction

Acceptance conditions for surface grinding machines with HECvertical grinding wheel spindle and reciprocating table - Testingof accuracy

Acceptance conditions for surface grinding machines with HEChorizontal grinding wheel spindle and reciprocating table -Testing of accuracy

Machine tools - Speeds and feeds HEC

Acceptance code for machine tools - Part 1 : Geometric accuracy HECof machines operating under no-load or finishing conditions

Acceptance code for machine tools - Part 2 : Determination of HECaccuracy and repeatability of positioning of numericallycontrolled machine tools

Acceptance conditions for internal cylindrical grinding machines HECwith horizontal spindle - Testing of accuracy

Acceptance conditions for external cylindrical grinding HECmachines with a movable table - Testing of accuracy

Test conditions for box type vertical drilling machines - Testing HECof the accuracy : Geometrical tests

Test conditions for box type vertical drilling machines - Testing HECof the accuracy : Practical tests

Test conditions for pillar type vertical drilling machines - Testing HECof the accuracy : Geometrical tests

Test conditions for pillar type vertical drilling machines - Testing HECof the accuracy : Practical test

TS

TS

TS

TS

TS

PDS

TS

TS

TS

TS

TS

TS

TS

TS

-73-



TYPE














Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

ISO 3070-1

ISO 3070-2

ISO 3070-3

ISO 3190

ISO 3655

ISO 3686

ISO 3875

ISO 4703

ISO 5734

ISO 6155-1

ISO 6155-2

ISO 666

ISO 8636-1

1987

1978

1982

1975

1986

1976

1990

1984

1986

1981

1986

1975

1987

Acceptance conditions for boring and milling machines with HEChorizontal spindle - Testing of the accuracy : Table-typemachines

Test conditions for boring and milling machines with horizontalspindle - Testing of the accuracy : Floor type machines

Acceptance conditions for boring and milling machines withhorizontal spindle - Testing of the accuracy : Planer typemachines with movable column

Test conditions for turret and single spindle co-ordinate drillingmachines with vertical spindle - Testing of accuracy

Acceptance conditions for vertical turning and boring lathes withone or two columns and a single fixed or movable table - Generalintroduction and testing of the accuracy

Test conditions for turret and single spindle co-ordinate drilling HECand boring machines with table of fixed height with verticalspindle - High accuracy machines - Testing of the accuracy

Acceptance conditions for external cylindrical centrelessgrinding machines - Testing of the accuracy

Acceptance conditions for surface grinding machines with twocolumns - Machines for grinding slideways - Testing of accuracy

Acceptance conditions of mechanical dividing heads for machinetools - Testing of accuracy

Acceptance conditions for horizontal spindle capstan, turret andsingle spindle automatic lathes - Testing of the accuracy - Part I :Machinable bar diameters greater than 25mm

Acceptance conditions for horizontal spindle capstan, turret and HECsingle spindle automatic lathes - Testing of the accuracy - Part 2 :Machinable bar diameters 25mm or less and chuck diameter upto 160mm

Machine tools - Mounting of plain grinding wheels by means of HEChub flanges

Acceptance conditions for piano-milling machines - Testing of HEC*the accuracy - Part 1 : Portal-type machines

TS

HEC

HEC

HEC

HEC

TS

TS

TS

TS

TS

HEC

HEC

HEC

HEC

TS

TS

TS

TS

TS

PDS

TS

-74-



















Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous










ISO 8636-2

ISO 8956

PD 6484

UKBRE

UKHSE

UKHSE1333

UKHSE COP 16

ANSI/IEEE 95

BS 173: Part 1

BS 2048

BS 2769

BS 2769: Part 2 :Section2.il

BS 4999

BS 4999: Part 0

BS 4999: Part 102

BS 4999: Part 103

1988

1986

1979

1977

1992

1984

1987

1987

1987

Acceptance conditions for piano-milling machines - Testing of HECthe accuracy - Part 2 : Gantry-type machines

Acceptance conditions for copying attachments, integral or HECotherwise, for lathes - Testing of the accuracy

1979 (1990) Commentary on corrosion at bimetallic contacts and its AAHK,MTRCalleviation

Reducing the risk of pest infestation: design recommendations AAHKand literature review

Guidance note on threshold limit values

Standards for ionising radiation

AAHK

AAHK

The protection of persons against ionising radiation arising from AAHKany work activity

Insulation test of large AC rotating machine HEC

Electric traction (rail and road vehicles) - Specification for AAHKrotating electrical machines

Specification for dimensions of fractional horse-power motors AAHK

Hand-held electric motor-operated tools

Specification for concrete vibrators

General requirements for rotating electrical machines

H

H

TS

TS

OS

PSS

OS

PDS

PSS

TS

PDS

PDS

PDS

PDS

A,AAHK,D,Em,H, PDSHEC,MTRC,W

General requirements for rotating electrical machines - general A,D.,Eni,H,HEC,Wintroduction and information on other Parts

Methods for determining losses and efficiency from tests(excluding machines for traction vehicles)

Specification for symbols

A,D,Em,H,HEC,W TS

A,D,Em,H,HEC OS

- 7 5 -



TYPE

































BS 4999: Part 105 1988

BS 4999: Part 108 1987

BS4999: Part 111 1987

BS 4999: Part 115 1992

BS 4999: Part 140 1987

BS 4999: Part 141 1987

BS 4999: Part 142 1987

BS 4999: Part 143 1987

BS 4999: Part 144 1987

BS 4999: Part 145 1987

BS 4999: Part 147 1988

BS 5000

BS 5000 : Part 16 1985

BS 5000: Part 17 1986

BS 5000 : Part 25 1986

BS 5000 : Part 40 1989

Classification for degrees of protection provided by enclosuresfor rotating machinery

Specification for terminal markings and direction of rotation

Specification for built-in thermal protection for electric motorsrated at 660 volts a.c. and below

Impulse voltage withstand levels of rotating ax. machines withform-wound stator coils

Specification for voltage regulation and parallel operation of a,c.synchronous generators

Specification for standard dimensions

Specification for mechanical performance: vibration

Specification for tests

Specification for the insulation of bars and coils of high voltagemachines, including test methods

Specification for winding terminations

Specification for dimensions of brushes and brush-holders forelectrical machinery

Rotating electrical machines of particular type or for particularapplications

Rotating electrical machines with type of protection *Nf

Machines with flameproof enclosures

D.C. mill auxiliary motors

Motors for driving power station auxiliaries

A,D,Em,H,HEC

A,D,Em,H,HEC,W

A,AAHK,D,Em,H,HEC,W

HEC

HEC

A,AAHK,D,Em,H,HEC

A,AAHK,D,Em,H,HEC,W

A,D,Em,H,HEC,W

A,D,Em,H,HEC,W

A,D,Em,H,HEC

HEC

A,AAHK,D,Em,H,HEC,W

HEC

HEC

HEC

HEC

OS

PDS

PDS

PDS

PDS

PDS

PDS

TS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

- 7 6 -



































BS 5000 : Part 50 1988

BS 5000 : Part 60 1988

BS 5000: Index 1981

Dimensions for oil burner motors

Stepping motors

General introduction and index

HEC

HEC

HEC

PDS

PDS

OS

BS 5000: Part 10 1978(1989) General purpose induction motors

BS 5000: Part 11 1973(1989) Small-power electric motors and generators

A,AAHKD,Em, PDSHEC,W

A,AAHK,D,Em PDS

BS 5000: Part 15 1985 Machines with type of protection 'e' (increased safety) HEC PDS

BS 5000: Part 3 1980(1985) Generators to be driven by reciprocating internal combustionengines

BS 5000: Part 99 1973(1986) Machines for miscellaneous application

A,D,Em,H,HEC PDS

A,AAHK9D,Em,H, PDSHEC

BS587

BS EN 60034

1957( 1984) Specification. Motor starters and controllers

BS EN 60034-1 1995

BS EN 60034-12 1996

BS EN 60034-6 1994

BS EN 60034-7 1993

BS EN 60034-9 1994

Rotating electrical machines

Rating and performance

A,D5Em,MTRC

AAHK

PDS

PDS

A,AAHK,D,Em,H, PDSW

Starting performance of single-speed three-phase cage induction A,D,Em9Hmotors for voltages up to and including 600V, 50Hz

PDS

IEC 0034-01 1996

Methods of cooling (IC Code)

Classification of types of constructions and mountingarrangements (IM Code)

noise limits

Rating and Performance

A,AAHK,D,Em,H, PSSW

A,D,Em,H,MTRC OS

A,AAHK,D5Em,Ep, PDSH,MTRC

HEC PDS

- 77-



TYPE





























IEC 0034-07 1992

IEC 60034

IEC 60034-03 1988

IEC 60034-04 1985

IEC 60034-05 1991

IEC 60034-06 1991

IEC 60034-09 1997

IEC 60034-10 1975

IEC 60034-11 1978

IEC 60034-11-2 1984

IEC 60034-11-3 1984

IEC 60034-13 1980

IEC 60034-14 1996

Motorised Drives & IEC 60034-15Machinery

1995

Motorised Drives & IEC 60034-16-1 1991Machinery

Classification of Types of Construction and MountingArrangements (IM Code)

Rotating Electrical Machines

Specific Requirements for Turbine-Type Synchronous Machines

Methods for Determining Synchronous Machine QuantitiesFrom Tests

Classification of Degrees of Protection Provided by Enclosuresfor Rotation Electrical Machinery (IP Code)

Methods of Cooling (IC Code)

Noise Limits

Conventions for Description of Synchronous Machines

Build-in Thermal Protection.: Rules for Protection of RotatingElectrical Machines

Thermal Detectors and Control Used in Thermal ProtectionSystems

General Rules for Thermal Protectors Used in ThermalProtection Systems

Specification for Mill Auxiliary Motors

Mechanical Vibration of Certain Machines with Shaft Heights56mm and Higher - Measurement, Evaluation and Limits ofVibration

Impulse Voltage Withstand Levels of Rotating AC. Machineswith Form-Wound Stator Coils

Excitation Systems for Synchronous Machines : Definitions

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

OS

PDS

PDS

TS

PDS

PSS

PDS

OS

PSS

PDS

PDS

PDS

TS

PDS

PDS

- 7 8 -



HEC

HEC

HEC

HEC

HEC

HEC

HEC

TYP

PDS

PDS

PSS

PSS

TS

TS

TS









ELECTRICAL &,MECHANICAL



















Motorised Drives 8cMachinery

IEC 60034-16-2

IEC 60034-16-3

IEC 60034-17

IEC 60034-18-1

IEC 60034-18-21

IEC 60034-18-22

IEC 60034-18-31

IEC 60034-18-32

IEC 60034-18-33

IEC 60034-19

IEC 60034-22

IEC 60072-1

IEC 60072-2

IEC 60072-3

1991

1996

1996

1992

1992

1996

1992

1995

1995

1995

1996

1991

1990

1994

Excitation Systems for Synchronous Machines : Models forPower System Studies

Excitation Systems for Synchronous Machines : DynamicPerformance

Cage Induction Motors When Fed From Converters -Application Guide

Functional Evaluation of Insulation Systems : GeneralGuidelines

Test Procedures for Wire-Wound Windings - ThermalEvaluation and Classification

Test Procedures for Wire-Wound Windings - Classification ofChanges and Insulation Component Substitutions

Test Procedures for Form-Wound Windings - ThermalEvaluation and Classification of Insulation Systems Used inMachines Up to and Including 50mva and 15kV

Test Procedures for Form-Wound Windings - ElectricalEvaluation of Insulation System Used in Machines Up to andIncluding 50mva and 15kV

Test Procedures for Form-Wound Windings - ElectricalEvaluation of Insulation System Used in Machines Up to andIncluding 50mva and 15kV

Specific Test Methods for DC. Machines on Conventional and HECRectifier-Fed Supplies

AC Generators for Reciprocating Internal Combustion (RIC) HECEngine Driven Generating Sets

Dimensions and Output Series for Rotating Electrical Machines: HECFrame Numbers 56 to 400 and Flange Numbers 55 to 1080

Frame Numbers 355 to 1000 and Flange Numbers 1180 to 2360 HEC

HEC

HEC

Small Built-in Motors - Flange Numbers BflO to Bf50 HEC

TS

TS

TS

PDS

PDS

PDS

PDS

-79-



TYPE



















Oil BurningEquipment








Pressure Vessels

Pressure Vessels

Pressure Vessels

Pressure Vessels

IEC 60136

ISO 1940-1

ISO 6545

BS 2869: Part 2

BS 799: Part 2

BS 799: Part 3

BS 799: Part 4

BS 799: Part 5

BS 799: Part 7

BS 799: Part 8

CAP 123

AS 1210

ASME

ASME

ASME

1986

1986

1992

1988

1991

1981

1991

1987

1988

1988

1977

Dimensions of Brushes and Brush-Holders for Electrical HECMachinery

Mechanical vibration - Balance quality requirements of rigid HECrotors : Determination of permissible residual unbalance

Acceptance conditions for gear hobbling machines - Testing of HECthe accuracy

Specification for fuel oil for agricultural and industrial engines HECand burners (classes A2, Cl, C2, D, E, F, G and H)

Specification for vaporising burners Em

Automatic and semi-automatic atomising burners up to 36 litres Emper hour

Specification for atomising burners (other than rnonobloc type) Emtogether with associated equipment for single burner and multiburner installations

Specification for oil storage tanks Em

Specification for dimensions of atomising oil burner pumps with Emrotating shaft and external drive

Specification for connecting dimensions between atomising oil Emburners and heat generators

Building (Oil storage Installations) Regulation

SAA unfired pressure vessels code A,Em,W

ASME Boiler and pressure vessel code : Section IV : Heating HECboilers

ASME Boiler and pressure vessel code : Section II Part A : HECFerrous material specifications

ASME Boiler and pressure vessel code : Section VII: HECRecommended guidelines for the care of power boilers

PDS

TS

TS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

TR

PDS

PDS

PDS

PSS

-80-



HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

A,Em,W

A,Em,W

HEC

A,AAHK,Em,W

A,AAHK,Em,H,HEC,W

HEC

TYPI

PDS

PDS

PDS

PDS

PDS

TS

PDS

PSS

PSS

PDS

PDS

PSS

PDS

PDS

PSS
















Pressure Vessels

Pressure Vessels

Pressure Vessels

Pressure Vessels

Pressure Vessels

Pressure Vessels

Pressure Vessels

Pressure Vessels

Pressure Vessels

Pressure Vessels

Pressure Vessels

Pressure Vessels

Pressure Vessels

Pressure Vessels

Pressure Vessels

ASME

ASME

ASME

ASME

ASME

ASME

ASME

ASME

ASME

ASME Section-VIII-DIV.l

ASME Section-VIII-DIV.2

BS 1113

BS5169

BS 5500

BS806

1980

1989

1992

1992

1997

1993

ASME Boiler and pressure vessel code : Section II Part B :Non-ferrous material specifications

ASME Boiler and pressure vessel code : Section II Part D :Materials - Property

ASME Boiler and pressure vessel code : Section II Part C :Specifications for welding rods, electrodes and filler metals

ASME Boiler and pressure vessel code : Section I - Powerboilers

ASME Boiler and pressure vessel code : Section VIII Division I:Pressure vessels

ASME Boiler and pressure vessel code : Section V : Non-destructive examination

ASME Boiler and pressure vessel code : Section VIII Division2 : Pressure vessels - Alternative rules

ASME Boiler and pressure vessel code : Section IX : Weldingand brazing qualifications

ASME Boiler and pressure vessel code : Section VI:Recommended rules for the care and operation of heating boilers

Boiler and pressure vessel code

Boiler and pressure vessel code

Specification for design and manufacture of water-tube steamgenerating plant (including superheaters, reheaters and steel tubeeconomizers)

Specification for fusion welded steel air receivers

Specification for unfired fusion welded pressure vessels

Specification for design and construction of ferrous pipinginstallations for and in connection with land boilers

-81 -



















Pressure Vessels

Pressure Vessels

Pressure Vessels

Pressure Vessels

Pressure Vessels

Pressure Vessels

Pressure Vessels

Pressure Vessels

Pressure Vessels

Pressure Vessels

Pressure Vessels

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

CAP 56

CAP 56

CAP 56

CAP 56

CFR49

IP

JIS Handbook

JIS Handbook

JIS Handbook

JIS Handbook

JIS Handbook

BS159

BS 4293

BS 5424

BS 5424: Part 2

BS 5486

1984

Boilers and Pressure Vessels Ordinance

Boilers and Pressure Vessels Regulations

Boilers and Pressure Vessels (forms) Order

Boilers and Pressure Vessels (Exemption) (Consolidation) Order

Code of federal regulations 49 Parts 178 to 199 transportation A,Em

2nd Edition Model code of safe practice for the petroleum industry : Pressure HECvessel systems examination

Ferrous materials & metallurgy II

Ferrous materials 8c metallurgy I

Piping

Welding

Non-ferrous materials & metallurgy

HEC

HEC

HEC

HEC

HEC

TR

TR

TR

TR

PSS

TS

OS

OS

OS

OS

OS

1992 Specification for high-voltage busbars and busbar connections A,AAHK,D,Em,W PDS

1983(1993) Specification for residual current-operated circuit-breakers

Specification for controlgear for voltages up to and including1000 V ax. and 1200 V dx.

1987( 1993) Specification for semiconductor contactors (solid statecontactors)

Low-voltage switchgear and controlgear assemblies

A,AAHK,D,Em,H, PDSHEC

AAHK

A,D,Em,W

AAHK, HEC

PDS

PDS

PDS

-82-



















Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

BS 5486: Part 1 1990

BS 5486: Part 11 1989

BS 5486: Part 12 1989

BS 5486: Part 13 1991

BS 5486: Part 2 1988

BS EN 60129 1994

BS EN 60298 1996

BS EN 60439

BS EN 60439-1 1994

BS EN 60439-2 1993

BS EN 60898 1991

BS EN 60947

BS EN 60947-1 1992

BS EN 60947-2 1996

BS EN 60947-3 1992

BS EN 60947-4

Requirements for type-tested and partially type-tested assemblies HEQHy

Specification for particular requirements of fiiseboards A,D,Em,HEC,MTRQW

PDS

PDS

Specification for particular requirements of type-tested miniature A,AAHK,D,Em,H, PDScircuit-breaker boards MTRC,W

Specification for particular requirements of consumer units A,D,Em,H,MTRC PDS

Particular requirements for busbar trunking systems (busways) HEC,Hy

Specification for alternating current disconnectors and earthingswitches

A.C. metal-enclosed switchgear and controlgear for ratedvoltages above 1 kV and to and including 52 kV

Specification for low-voltage switchgear and controlgearassemblies

Specification for type-tested and partially type-tested assemblies

AAHK

AAHK

PDS

PDS

PDS

A,D,Em,H,MTRC, PDSW

A,AAHK,D,Em,H, PDSHEC

Particular requirements for busbar trunking systems (busways) A,D,Em,H,HEC PDS

Specification for circuit-breakers for overcurrent protection forhousehold and similar installations

Specification for low-voltage switchgear and controlgear

General rules

Circuit breakers

Switches, disconnectors, switch-disconnectors and fuse-combination units

Contactors and motor-starters

A,AAHK,D,Em,H,T PDS

A,AAHK,D,Em,MTRC

A,AAHK,D,Em,H

AAHK,H

AAHK,H

AAHK,H

PDS

PDS

PDS

PDS

PDS

-83-

















Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Switchgear

Transformers

Transformers

Transformers

Transformers

Transformers

Transformers

BS EN 60947-4-1 1992

BS EN 60947-5-1 1992

BS EN 61008

BS EN 61008-1 1995

BS EN 61008-2-1 1995

BS EN 61009

CAP 406

IEC 60050-441 1984

BS171 1970

BS 171: Par t i 1978

BS 171: Part 2 1978

Electromechanical contactors and motor-starters

Control circuit devices and switching elements -Electromechanical control circuit devices

AAHK,H

AAHK

Residual current operated circuit-breakers without integral Emovercurrent protection for household and similar uses (RCCBs)

General rules 11 EC

Specification for Residual Current Operated Circuit-Breakers IIECWithout Integral Over current Protection for Household andSimilar Uses (RCCBs) Section 2-1: Applicability of the GeneralRules to RCCBs Functionally Independent of Line Voltage

Specification for residual current operated circuit breakers with Emintegral overcurrent protection for household and similar uses(RCCBs)

Electricity Supply Regulations Sections 8 and 27. ElectricitySupply (Special Areas) Regulations Section 9

International Electrotechnical Vocabulary. Switchgear,Controlgear and Fuses

Power transformers

General

Specification for temperature rise requirements

BS 171: Part 3 1987(1993) Specification for insulation levels and dielectric tests

BS 171: Part 4 1978(1993) Specification for tappings and connections

BS 171: Part 5 1978(1993) Specification for ability to withstand short circuit

PDS

PDS

PDS

PDS

PDS

PDS

I1EC

A,AAHKD.Ern»MTRCW

!XEm

D,Em

AJXfmW

AJXBtn

A.DJmW

TR

OS

PDS

PDS

PDS

TS

PDS

PDS

-K4-

















ELECTRICAL &,MECHANICAL

Transformers

Transformers

Transformers

Transformers

Transformers

Transformers

Transformers

Transformers

Transformers

Transformers

Transformers

Transformers

Transformers

Transformers

BS3535

BS3941

BS 5953

BS6184

BS 6436

BS 7626(IEC60185)

BS 7806

BS EN 60551

1990BS 3535: Part1(IEC 60742)

BS 3535: Part 2 1990

Isolating transformers and safety isolating transformers

General requirements

Specification for transformers for reduced system voltage

1975(1992) Specification for voltage transformers

1980 (1993) Guide on power transformers

1981(1992) Method for measuring partial discharges in instrumenttransformers

1984( 1993) Specification for ground mounted distribution transformers for A,D,Em,MTRCcable box or unit substation connection

1993

1995

BS EN 60076-1 1997

BS EN 60076-2 1997

1993

BS IEC 60076-8 1997

CAP 406

UPS & Emergency BS 5514Generators

Specification for current transformers

Dry-type power transformers

Power transformers - general

Power transformers - specification for temperature riserequirements

Determination of transformer and reactor sound levels

Power transformers - application guide

Electricity supply regulation Sections 9, 10 & 29

Reciprocating internal combustion engines: performance

A,D,Em,MTRC

A,D,Em

A,D,Em,HEC

A,AAHK,D,Em,MTRQW

MTRC

AAHK

A,D,Em,MTRC

A,AAHK5D,Em,MTRC,W

AAHK

A,D,Em,W

A,D,Em,W

AAHK

A,D,Em

PDS

PDS

PDS

PDS

PSS

TS

PDS

PDS

PDS

PDS

PDS

TS

OS

TR

A,AAHK,Em,H,W PDS

-85-



TYPE


















Valves & Pumps

Valves & Pumps

Valves & Pumps

Valves & Pumps

Valves & Pumps

Valves & Pumps

Valves & Pumps

Valves & Pumps

Valves & Pumps

Valves & Pumps

Valves & Pumps

IP

ISO 2953

ISO 7475

BS 1414

BS 1415

BS 4062:

BS 4062:

BS 4082

BS5I50

BS5151

BS5152

BS5153

BS5154

BS5155

1998 Model code of safe practice for the petroleum industry :Guidelines for the control of hazards arising from staticelectricity

1985 Balancing machines - Description and evaluation

1984 Balancing machines - Enclosures and other safety measures

1975 (1991) Specification for steel wedge gate valves (flanged and butt-welding ends) for the petroleum, petrochemical and alliedindustries

Mixing valves

1982 Valves for hydraulic fluid power systems - methods fordetermining pressure differential/flow characteristics

1990 Valves for hydraulic fluid power systems - methods fordetermining performance

Specification for external dimensions for vertical in-linecentrifugal pumps

HEC PSS

1990 Specification for cast iron gate valves

1974( 1991) Specification for cast iron gate (parallel slide) valves for generalpurposes

1974( 1991) Specification for cast iron globe and globe stop and check valvesfor general purposes

1974(1991) Specification for cast iron check valves for general purposes

1991 Specification for copper alloy globe, globe stop and check, checkand gate valves

1984(1991) Specification for buttery valves

HEC

HEC

AAHK

AAHK,HEC,W

A,D,Em,MTRC

A,D,Em,MTRC

AJD,Em

A,AAHK,D,Em,H,HEC,Hy,MTRC,T,W

A,D,Em,H,T

A,AAHK,D,Em,H,MTRCJ,W

A,AAHK,D,Em,H,HECHy,MTRCXW

A,D,Em,H,I IRC,Hy,MTRC,T,W

A,AAHK,D,Em,MTRCXW

OS

PSS

PDS

PDS

TS

TS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

- 86 -


GROUP
















SUBGROUP

Valves & Pumps

Valves & Pumps

Valves & Pumps

Valves & Pumps

Valves & Pumps

Valves & Pumps

Valves & Pumps

Valves & Pumps

Valves & Pumps

Valves & Pumps

Valves & Pumps

Valves & Pumps

Valves & Pumps

Valves & Pumps

Valves & Pumps

NUMBER

BS5156

BS5157

BS5158

BS5159

BS5160

BS5163

BS 5257

BS5316

BS5351

BS 5352

BS599

BS6316

BS 6755

BS 6755: Part 1

BS 6755: Part 2

YEAR

1985(1990)

1989

1989

1974(1991)

1989

1986(1991)

1975

1986(1991)

1981(1991)

1966

1992

1986(1991)

1987

TITLE

Specification for diaphragm valves

Specification for steel gate (parallel side) valves

Specification for cast iron plug valves

Specification for cast iron and carbon steel ball valves for generalpurposes

Specification for steel globe valves, globe stop and check valveand lift type check valves

Specification for predominantly key-operated cast iron gatevalves for waterworks purposes

Specification for horizontal end-suction centrifugal pumps (16bar)

Specification for acceptance tests for centrifugal, mixed flow andaxial pumps

Specification for steel ball valves for the petroleum,petrochemical and allied industries

Specification for steel wedge gate, globe and check valves 50mmand smaller for the petroleum, petrochemical and alliedindustries

Methods of testing pumps

Code of practice for test pumping of water wells

Testing of valves

Specification for production pressure testing requirements

Specification for fire type-testing requirements

USERORGANISATION

A,D,Em,H,MTRC,T

,wA,D,Em

A,D,Em,W

A,D,Em,H,MTRC,T

,wA,D9Em,W

A,AAHK,D,H,HEC,Hy,MTRC,T,W

A,D,Em,MTRC,T

A,AAHK,D,Em,MTRC,T,W

AAHK

AAHK

A,D,Em,MTRC

H

AAHK

AAHK

AAHK

TYPE

PDS

PDS

PDS

PDS

PDS

PDS

PDS

TS

PDS

PDS

TS

TS

TS

TS

TS

-87-



















Valves & Pumps

Valves & Pumps

Valves & Pumps

Valves & Pumps

Valves & Pumps

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

BS 7350

BS EN 558

BS EN 558-1

BS EN 558-2

BS 1442

BS 2848(IEC60684-3-300)

BS31

BS3858

BS 4066: Part 1

BS4109

BS 4393

BS 4568

BS 4568: Part 1

BS 4568: Part 2

BS 4579

1990

1996

1996

Specification for double regulating globe valves and flow AAHKmeasurement devices for heating and chilled water systems

Industrial valves. Face-to-face and centre-to-face dimensions of AAHKmetal valves for use in flanged pipe systems

PN-designated valves AAHK

Class-designated valves AAHK

BS EN 60335-2- 199151

Stationary circulation pumps for heating and service installations A,D,Em

1969(1986) Specification for galvanized mild steel wire for armouring cables AAHK

PDS

PDS

PDS

PDS

PDS

PDS

1973 Specification for flexible insulating sleeving for electrical A,D,Em PDSpurposes

1940( 1988) Specification. Steel conduit and fittings for electrical wiring A,D,Em,MTRC, W PDS

1992 Specification for binding and identification sleeves for use on A,AAHK,D,Em,W PSSelectric cables and wires

1980 (1995) Tests on electric cables under fire conditions - Method of test on AAHKa single vertical insulated wire or cable

1970 (1991) Specification for copper for electrical purposes. Wire for general H.KTelectrical purposes and for insulated cables and flexible cords

TS

PDS

PDS1991 Specification for solderable tin or tin-lead coated wires for AAHKcomponent terminations

Specification for steel conduit and fittings with metric threads of AAHK,Em,MTRC PDSISO form for electrical installations

1970 (1993) Steel conduits, bends and couplers

1970 (1988) Fittings and components

AAHK,HEC,Hy, PDSMTRC

AAMKJiECHy, PDSMTRC

Specification for performance of mechanical and compression AAHKjoints in electric cable and wire connectors

PDS


















Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

BS 4607

BS 4678

BS 4678: Part 1

BS 4678: Part 2

BS 4678: Part 4

BS 5308

BS 5467

BS 6004(IEC60227)

BS 6007

BS 6099

BS 6099: Part 1

BS 6099: Part 2:Section 2.2

BS6121

BS 6121: Part 1-2

BS 6121: Part 3

19711

1973 i

1982

1995

1993

1981

1982i

1973

1989

1990

Non-metallic conduits and fittings for electrical installations AAHK,Em

Cable trunking

PDS

Cable Trunking Made of Insulating Material

Instrumentation cables

Specification for cables with thermosetting insulation forelectricity supply for rated voltages of up to and including600/1000 V and up to and including 1900/3300 V

AAHK,Em

AAHK,HEC

AAHK,HEC

HEC

AAHK

PDS

PDS

PDS

PDS

PDS

A,AAHK,D,Em,H PDS

A,AAHK,D,Em,H, PDSHEC,MTRC,T

Specification for PVC-insulated cables (non-armoured) forelectric power and lighting

Specification for rubber-insulated cables for electric power and A,AAHKD,Em,T,W PDSlighting

Conduits for electrical installations A,D,Em,H,MTRC PDS

Specification of general requirements

Mechanical cable glands

A,D,Em,H

D,Em,H

AAHK,HEC,Hy

Mechanical cable glands - specifications for metallic glands and A,D,Em,Hpolymer glands

Mechanical cable glands - specification for special corrosion A,D,Em,Hresistant glands

PDS

PDS

PDS

PDS

PDS



TYPE















Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

BS6141

BS 6207

BS6231

BS 6346

BS 6387

BS 6425

BS 6425: Part 1

BS 6425: Part 2

BS 6469

BS 6480(IEC60055-1-2)

BS 6500(IEC60227,60245)

BS 6558

BS 6622(IEC60502)

BS 6724

1991

1990

1997

1994

1990

1993

1988

1994

1985

1991

1997

Specification for insulated cables and flexible cords for use inhigh temperature zones

Mineral insulated cables with a rated voltage not exceeding 750V

Specification for PVC-insulated cable for switchgear andcontrolgear wiring

Specification for PVC-insulated cables for electricity supply

Specification for performance requirements for cables requiredto maintain circuit integrity under fire conditions

Test on gases evolved during the combustion of materials fromcables

A,D,Em

A,AAHK,D,Em,MTRC,W

A,AAHK,D,Em,H,HEC,MTRC,W

A,AAHK,D,Em,H,HECMTRCXW

A,AAHK,D,Em,HEC,MTRC,W

AAHK

Method for determination of amount of halogen acid gas evolved AAHKduring combustion of polymeric materials taken from cables

Determination of degree of acidity (corrosi vity) of gases by AAHKmeasuring pH and conductivity

Insulating and sheathing materials of electric cables AAHK

Specification for impregnated paper - insulated lead or lead alloy A,D,Em,Wsheathed electric cables of rated voltages up to and including33000 V

PDS

PDS

PDS

PDS

PDS

TS

TS

TS

PDS

PDS

Specification for insulated flexible cords and cables

Optical fibres and cables

A,AAHK,D,Em,MTRC

PDS

A,Em,RHEC,Hy,T PDS

1991(1996) Specification for cables with extruded cross-linked polyethylene A.AAHK,D,Em PDSor ethylene propylene rubber insulation for rated voltages from3800/6600 V up to 19000/33000 V

Specification for armoured cables for electricity supply having A,AAHK,D,Em, PDStherrnosetting insulation with low emission of smoke and HECcorrosive gases when affected by fire

- 9 0 -

















Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

BS 6746 1990

BS6899 1991

BS6910

BS 6910: Parti 1988

BS 6910: Part 2

BS7211

BS 731: Parti

BS 7622

BS 7622: Part 1

BS 7622: Part 2

BS 7629

BS 7629: Part 1

BS 7629: Part 2

BS7671

1989

1994

Specification for PVC insulation and sheath of electric cables AAHK

Specification for rubber insulation and sheath of electric cables AAHK

Cold pour resin compound and heat-shrink cable joints in thevoltage range up to 1000 V a.c. and 1500 V d.c.

Specification for materials

Code of practice for on-site installation

Specification for thermosetting insulated cables (non-armoured)for electric power and lighting with low emission of smoke andcorrosive gases when affected by fire

1952(1993) Flexible steel conduct for cable protection and flexible steeltubing to enclose flexible drives : Flexible steel conduct &adaptors for the protection of electric cable

Measurement of smoke density of electric cables burning underdefined conditions

1993 Test apparatus

1993 Test procedure and requirements

Specification for 300/500 V fire resistant electric cables havinglow emission of smoke and corrosive gases when affected by fire

1997 Multicore cables

1997 Multipair cables

1992 Requirements for electrical installations. IEE Wiring

Regulations. Sixteenth edition

PDS

PDS

AAHK

AAHK

AAHK

A,AAHK,D9Em

A,AAHK,D,Em,HEQMTRC

AAHK

AAHK

AAHK

AAHK,Em,H

Em,H

Em,H

AAHK,Em

PDS

PDS

PSS

PDS

PDS

TS

TS

TS

PDS

PDS

PDS

PSS

- 9 1 -

















Wiring & Cables BS 7846

Wiring & Cables BS 7889

Wiring & Cables BS91

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

Wiring & Cables

1996

1997

Specification for 600/1000 V armoured fire-resistant electric Hcables having low emission of smoke and corrosive gases whenaffected by fire

Specification for 600/1000 V single-core unarmoured electriccables having thermosetting insulation

1973 (1988) Specification for electric cable soldering sockets

BS EN 187000 1994

BS EN 50086 1994

BS EN 50086-1 1994

BS EN 50086-2 1996

BS EN 50086-2-1 1996

BS EN 60305 1996

BS EN 60383-2 1995

BS EN 60423

CAP 406

CAP 406

CAP 406

1995

General specification for optical fibre cables

H

AAHK

AAHK

Specification for conduit systems for electrical installations A,Em,HEC


Particular requirements

Rigid conduit system

A,Em,H,HEC

H,HEC

Insulators for overhead lines with a nominal voltage above 1 kV. AAHKCeramic or glass insulator units for a.c. systems. Characteristicsof insulator units of the cap and pin type

Insulators for overhead lines with a nominal voltage above 1000 AAHKV - Insulator strings and insulator sets for ax. systems.Definitions, test methods and acceptance criteria

Conduits for electrical purpose. Outside diameters of conduits A,D,Em,Hfor electrical installations and threads for conduits and fittings

Code of practice for the Electricity (Wiring) Regulations 1997Edition

Electricity (Wiring) Regulations

Electricity Supply Regulations Sections 4, 5, 6, 13, 14, 15, 16,18, 19, 20, 21 & 28. Electricity Supply (Special Areas)Regulations Section 8

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

TS

PDS

PSS

TR

TR

-92-






ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

Wiring & Cables

Wiring & Cables

Wiring & Cables

Air

Air

Air

Air

Air

Air

Air

Air

Air

Air

Air

Air

Air

Air

Air

Air

Air

EMSD

IEC 60051

IEC 6005i

CAP 133

CAP311

CAP311

CAP311

CAP311

CAP 311

CAP 311

CAP 311

CAP 311

CAP 311

CAP311

CAP 311

CAP 311

CAP311

CAP 311

CAP 403

CAP 403

1997 Code of practice for the Electric (wiring) regulation

1984 International Electrotechnical Vocabulary.: Electric Cables

1990 International Electrotechnical Vocabulary.: Overhead Lines

Pesticides Ordinance

Air Pollution Control (Asbestos) (Administration) Regulation

Air Pollution Control (Air Control Zones) (Declaration)(Consolidation) Order

Air Pollution Control (Smoke) Regulations

Air Pollution Control (Specified Processes) (Removal ofExemption) Order

Air Pollution Control (Furnaces, Ovens and Chimneys)(Installation and Alteration) Regulations

Air Pollution Control (Open Burning) Regulation

Air Pollution Control (Dust & Grit Emission) Regulations

Air Pollution Control (Motor Vehicle Fuel) Regulation

Air Pollution Control (Vehicle Design Standards) (Emission)Regulations

Air Pollution Control (Specified Processes) (Specification ofRequired Particulars and Information) Order

Air Pollution Control (Fuel Restriction) Regulations

Air Pollution Control (Specified Processes) Regulations

Air Pollution Control Ordinance

Air Pollution Control (Construction Dust) Regulations

Ozone Layer Protection (Products Containing ScheduledSubstances) (Import Banning) Regulation

Ozone Layer Protection (Controlled Refrigerants) Regulation

HEC

HEC

HEC

PSS

OS

OS

TR

TR

TR

TR

TR

TR

TR

TR

TR

TR

TR

TR

TR

TR

TR

TR

TR

-93-



TYPE

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

Air

Air

Air

Air

Air

Air

Air

Air

Effluent

Effluent

Effluent

Effluent

Effluent

Effluent

Effluent

Effluent

Effluent

Effluent

Energy

Energy

General

General

CAP 403

CAP 403

EPD

EPD

EPD

EPD

EPD/TR 8/97

WBTC 6/90

CAP 123

CAP 358

CAP 358

EPD

EPD

EPD

EPD

EPD

ISO 5667-10

ISO 5667-12

BS 6472

BS 6841

BS2011

CAP 131

1995

1995

1995

1995

1997

1990

1990

1991

1992

1993

1994

1992

1995

1992

1987

Ozone Layer Protection (Fees) Regulations

Ozone Layer Protection Ordinance

Practice note on control of air pollution in car parks

Practice note on control of air pollution in vehicle tunnel

Air quality guidelines for bus terminus

Air quality guidelines for car parks

Landfill Gas Hazard Assessment - Guidance Note

Greenhouse effect - allowance in design

Building (Standards of Sanitary Fitments, Plumbing, DrainageWorks and Latrines) Regulations

Water Pollution Control Ordinance

Water Pollution Control (General) Regulations

Guidelines for the design of small sewage treatment plants

Technical memorandum on standards for effluents dischargedinto drainage and sewerage systems, inland and coastal waters

Guidance notes on discharges from village houses

Grease traps for restaurants and food processors

Connections to Sewers under the Water Pollution ControlOrdinance

Water quality - Sampling: Guidance on sampling of waste waters

Water quality - Sampling : Guidance on sampling of bottomsediments

Guide to evaluation of human exposure to vibration in buildings(1 Hz to 80 Hz)

Guide to measurement and evaluation of human exposure towhole-body mechanical vibration and repeated shock

Environmental testing

Town Planning Ordinance

Ep

Ep

Ep

Ep

Ep

HEC,Hy

A,Ep

A,Ep

A,D,Ep

Ep

HEC

HEC

HEC

A,D,HEC,T

AAHK

HEC

TR

TR

PSS

PSS

SS

SS

PSS

PSS

TR

TR

TR

PSS

SS

PSS

PDS

PSS

TS

TS

OS

OS

TS

TR

- 9 4 -



TYPE

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

General

General

General

Noise

Noise

Noise

Noise

Noise

Noise

Noise

Noise

Noise

Noise

Noise

Noise

Noise

Noise

Noise

Noise

Noise

CAP 131

EPD

ISO 14000

ANSI/SAE AIR1845

BS 4196: Parti

BS 4196: Part 2

BS 5228: Part 1

BS 5228: Part 2

BS 5228: Part 3

BS 5228: Part 4

BS EN 60651

CAP 400

CAP 400

CAP 400

CAP 400

CAP 400

CAP 400

CAP 400

CAP 400

CAP 400

1997

1996

1991

1991

1984

1984

1984

1992

1994

Town Planning Regulations

Technical Memorandum on EIA Process - A Guide to the EIAOrdinance

Standards for environmental management

Procedure for the calculation of aeroplane noise in the vicinity ofairports

Sound Power Levels of Noise Sources : Precision Methods forDetermination Sound Power Levels for Broad-Band Sources inReverberation Rooms

Sound Power Levels of Noise Sources : Precision Methods forDeter Sound Power Levels for Discrete-Frequency & Narrow-Band Sources in Reverberation Rooms

Code of practice for basic information and procedures for noisecontrol

Guide to noise control legislation for construction anddemolition, including road construction and maintenance

Code of practice for noise control applicable to surface coalextraction by opencast methods

Code of practice for noise control applicable to piling operations

Specification for sound level meters

Noise Control Ordinance (Exemption from Section 6(1) and6(2)) (Chek Lap Kok) Order

Noise Control (Motor Vehicles) Regulation

Noise Control (Air Compressor) Regulations

Noise Control (General) Regulations

Noise Control Ordinance

Noise Control (Construction Work Designated areas) Notice

Noise Control (Construction Work) Regulation

Noise Control (Appeal Board) Regulations

Noise Control (Hand Held Percussive Breakers) Regulations

HEC

HEC

HEC

HEC

HEC

TR

PSS

SS

PSS

TS

TS

A,D,Ep,HEC,Hy,T,W

A,Ep,HEC,Hy,T,W

A,Ep,HEC,Hy

A5D,Ep,HEC,Hy,T

AAHK

PSS

PSS

PSS

PSS

PDS

TR

TR

TR

TR

TR

TR

TR

TR

TR

- 9 5 -



TYPE

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

Noise

Noise

Noise

Noise

Noise

Noise

Noise

Noise

Noise

Noise

Noise

Noise

Noise

Noise

Noise

CAP 599

EPD

EPD

EPD

EPD

EPD

IEC651

IEC 804

IEC 942

ISO 3740

ISO 3741

ISO 3742

ISO 3743

ISO 3744

ISO 3745

1989

1989

1989

1996

1996

1979

1985

1988

1980

1988

1988

1988

1981

1977

Factories and Industrial Undertakings (Noise at Work)Regulations

Technical memorandum on noise from construction work otherthan percussive piling

Technical memorandum on noise from percussive piling

Technical memorandum on the assessment of noise from placesother than domestic premises, public places or construction sites

Technical Memorandum on Noise from Construction Work inDesignated Area

Technical Memorandum on Noise from Construction WorkOther than Percussive Piling

Sound level meters

Integrating-averaging sound level meters

Sound calibrators

Acoustics - determination of sound power levels of noise sources- guidelines for the use of basic standards and for the preparationof noise test codes

Acoustics - determination of sound power levels of noise sources- precision methods for broad-band sources in reverberationrooms

A,Ep,Hy

A,Ep,Hy

A,Ep,Hy

HEC

HEC

A,Ep,HEC,Hy

A,Ep,HEC,Hy

HEC

A,Ep,Hy

TR

PSS

PSS

PSS

PSS

PSS

PDS

PDS

PDS

TS

A,Ep,Hy

Acoustics - determination of sound power levels of noise sources A,Ep,Hy- precision methods for discrete-frequency and narrow-bandsources in reverberation rooms

Acoustics - determination of sound power levels of noise sources AJEpJIy- engineering methods for special reverberation test rooms

Acoustics - determination of sound power levels of noise sources AJEpJ ly- engineering methods for free-field conditions over a reflectingplane

Acoustics - determination of sound power levels of noise sources A,Ep,Hy- precision methods for ancchoic and semi-anechoic rooms

TS

TS

TS

TS

TS

- 9 6 -



TYPE

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

Noise

Noise

Noise

Noise

Waste

Waste

Waste

Waste

Waste

Waste

Waste

Waste

Waste

Waste

Waste

Waste

Waste

ISO 3746

ISO 4871

ISO 4872

ISO 6393

ASTMD1973

CAP 354

CAP 354

CAP 354

CAP 354

EPD

EPD

EPD

EPD

EPD

EPD

PN 3/96

WBTC 14/94

1995

1984

1978

1985

1991

1992

1992

1992

1993

1992

1992

1996

1995

Acoustics - Determination of sound power levels of noisesources using sound pressure - Survey method using anenveloping measurement surface over a reflecting plane

Acoustics - noise labelling of machinery and equipment

Acoustics - measurement of airborne noise emitted byconstruction equipment intended for outdoor use - method fordetermining compliance with noise limits

Acoustics - measurement of airborne noise emitted by earth-moving machinery - method for determining compliance withlimits for exterior noise - Stationary test condition

Standard Guide for Design of a Liner System for Containment ofWastes

Waste Disposal (Charges for Disposal of Chemical Waste)Regulation

Waste Disposal Ordinance

Waste Disposal (Chemical Waste) (General) Regulation

Waste Disposal (Permits and Licences) (Forms and Fees)Regulation

Code of practice on the handling, transport and disposal ofpolychlorinated biphenyl (PCB) wastes

Code of practice on the packaging, labelling and storage ofchemical wastes

EPD technical circular No. 1-1-92 - classification of dredgedsediments for marine disposal

Code of practice on the handling, transport and disposal ofasbestos wastes

A Guide to the Registration of Chemical Waste Producers

A Guide to the Chemical Waste Control Scheme

Pro PECC Practice Notes for Landfill Gas Hazard Assessmentfor Developments adjacent to Landfills

Use of PFA as general fill in reclamation

A,Ep,HEC,Hy

A,Ep,Hy

A,Ep,Hy

A3Ep,Hy

A;C,Ep

A,C,Ep

A,C,Ep,HEC

A,C,Ep

A,C,Ep

HEC

HEC

Ep

TS

OS

TS

TS

PSS

TR

TR

TR

TR

PSS

PSS

OS

PSS

OS

PSS

PDS

C,Ep PSS

- 9 7 -



TYPE

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

ENVIRONMENT

FOUNDATIONS

FOUNDATIONS

FOUNDATIONS

FOUNDATIONS

FOUNDATIONS

FOUNDATIONS

FOUNDATIONS

FOUNDATIONS

FOUNDATIONS

FOUNDATIONS

FOUNDATIONS

FOUNDATIONS

FOUNDATIONS

GAS SUPPLY

Waste

Waste

Waste

Waste

Waste

General

Piling

Piling

Piling

Piling

Piling

Piling

Piling

Piling

Piling

Piling

Piling

Piling

Flueing S

WBTC 16/96

WBTC 2/93

WBTC 22/92

WBTC 4/98

WBTC 5/98

BS 8004

ASD

ASTMD1143

ASTM D 3689

ASTM D 3966

ASTM D 4945

BS 5573

BS 8008

CIRIA

GEO PublicationNo. 2/90

GEO Report No.29

GEO Report No.32

HKIE

^Ventilation BS 1181

1996

1995

1992

1998

1998

1986

1991

1981

1983

1981

1989

1978

1996

1977

1990

1994

1994

1981

1989

Wet Soil in Public Dumps

Public dump

Marine disposal of dredged mud

Use of Public Fill in Reclamation and Earth Filling Projects

On site sorting of Construction Waste on Demolition Sites

Code of practice for foundations

Particular specification for non-destructive integrity testing forpiling

Standard Method of Testing Piles under Static AxialCompressive Load

Standard method of testing individual piles under static axialtensile load

Standard method of testing piles under lateral load

Standard test method for high-strain dynamic testing of piles

Code of practice for safety precautions In the construction oflarge diameter boreholes for piling and other purposes

Safety precautions and procedures for the construction anddescent of machine-bored shafts for piling and other purposes

Integrity testing of piles: a review

Foundation properties of marble and other rocks in the YuenLong - Tuen Mun area

Classification and zoning of marble sites

Karst morphology for foundation design

Guidance Note on Hand-dug Caissons

Specification for clay flue linings and flue terminals

C,Ep

C,Ep

A,C,Ep

C

C

A,AAHK,C,D,H,HEC,Hy,MTRC,T,W

PDS

OS

PSS

PSS

PSS

PSS

A,HEC TS

A,C,DtHEC,Hy,T,W TS

A,C,D,HEC,Hy,T,W TS

A,C,D,HEC,Hy,T,W TS

A,C,D,HEC,Hy,T,W TS

A,C,D,H,HEC,Hy, PSSMTRC,T,W

AAHK PSS

AJ1EC TS

A,C,D,HEC,Hy,T,W OS

CHEC

CHEC

OS

PSS

A,C,D,H,Hy,T,W PSS

A,AAHK,Ep,HKC, PDSHv

- 9 8 -



TYPE

GAS SUPPLY Flueing & Ventilation BS 1289: Part 2 1989

GAS SUPPLY Flueing & Ventilation BS 5440

GAS SUPPLY Flueing & Ventilation BS 5440 : Part 1 1990(1995)

GAS SUPPLY Flueing & Ventilation BS 5440: Part 2 1989(1994)

GAS SUPPLY Fiueing & ventilation BS 5720 1979

GAS SUPPLY Fiueing & ventilation BS 5925 1991 (1995)

GAS SUPPLY Fuel Gas Installations BS 5045 : Part 2 1989

GAS SUPPLY Fuel Gas Installations BS 5258

GAS SUPPLY Fuel Gas Installations BS 5258: Part 1 1986




GAS SUPPLY Fuel Gas Installations BS 5355 1976

GAS SUPPLY Fuel Gas Installations BS 5386






Flue blocks and masonry terminals for gas appliances -specification for clay flue blocks and terminals

Installation of flues and ventilation for gas appliances of ratedinput not exceeding 60 kW(lst, 2nd and 3rd family gases)

Specification for installation of flues

Specification for installation of ventilation for gas appliances

Codes of practice for mechanical ventilation and air conditioningin building

Codes of practice for ventilation principles and designing fornatural ventilation

Transportable gas containers : Specification for steel containersof 0.5 L up to 450 L water capacity with welded seams

Safety of domestic gas appliances

Specification for central heating boilers and circulators

Specification for decorative fuel effect gas appliances (2nd and3rd family gases)

Cooking appliances

Specification for gas fires

Specification for filling ratios and developed pressures forliquefiable and permanent gases

Specification for gas burning appliances

Gas burning appliances for instantaneous production of hot waterfor domestic use

Domestic cooking appliances burning gas

Built-in domestic cooking appliances

Specification for gas burning instantaneous water heaters withautomatic output variation (2nd and 3rd family gases)

Specification for Domestic Gas Cooking Appliances withForced-convection Ovens

A,HEC

A,Em,HKCG

A,Em,HKCG

A,Em,HKCG

HKCG

HKCG

HEC

A,Em

A,Em

A,Em

A,Em

A,Em

A,Em

A,Em

A,Em

A,Em

A,Em

A,Em

Em

PDS

PSS

PSS

PSS

PSS

PSS

PSS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

- 9 9 -



TYPE

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

Fuel Gas Installations BS EN 26 1989

Fuel Gas Installations BS EN 969 1996

Fuel Gas Installations CAP 51




Fuel Gas Installations
















Fuel Gas Installations IGE/SR/4 1986

CAP 51

CAP 51

CAP 51

CAP 51

CS4(HSE)

EMSD

GU 03: Parti

GU05

GU06

GU09

HKCG/SER OP 4

HKCG/SER OP 5

HKCG/SER OP 7

HKCG/SER OP 8

HKCG/SER/OP 6

IGE/SR/3

1997

1991

1998

1997

1998

1991

1989

1989

1992

1992

1987

Gas fired Instantaneous Water Heaters for the production ofdomestic water fitted with atmospheric burners

Specification for ductile iron pipes, fittings, accessories and theirjoints for gas pipelines. Requirements and test methods

Gas Safety Ordinance

Gas safety (gas supply) regulations

Gas safety (gas quality) regulations

Gas safety (registration of gas installers and gas contractors)regulations

Gas safety (registration of gas supply companies) regulations

Gas safety (miscellaneous) regulations

Gas safety (gasholders examination) regulation

Gas safety (installation and use) regulations

The keeping of LPG in cylinders and similar containers

Code of Practice - Avoiding Danger from Gas Pipes

Domestic instantaneous gas water heaters

Approval of Domestic Gas Appliances

LPG installation for catering in commercial premises

Low Pressure Regulators for Supplying Gas From LPGCylinders Having Less Than 40 Litres Water Capacity

Towngas service risers

Towngas meters

Towngas domestic appliances

Towngas non-domestic appliances

Towngas installation pipes

Electrical equipment in gas production transmission storage anddistribution

Low pressure gasholders storing lighter than air gases

A, Em

HEC

A,Em

A,HEC

A,Em

Em

A,Em

Em

A, Em

A,Em

A,Em

A,Em

A.Em

A,Em

PDS

TS

TR

TR

TR

TR

TR

TR

TR

TR

PSS

PSS

PDS

PDS

FSS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

A, Em PDS

-100-



TYPE

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

Fuel Gas Installations IGE/SR/5 1987

Fuel Gas Installations IGE/TD/1 1984










Fuel Gas Installations ISO 10400 1993





Fuel Gas Installations LPGACP 2 1994

Fuel Gas Installations LPGACP 9 1986

Fuel Gas Installations LPGA CP 1 1993

Entry into and work associated with confined spaces

Steel pipelines for high pressure gas transmission

Pressure regulating installations for inlet pressures between 75bar and 7 bar

Operation and maintenance of gas pressure raising plant foroutlet pressure not exceeding 7 bar

Pipework stress analysis for gas industry plant

Distribution mains

Gas services

Transport handling and storage of plastic pipe part 1polyethylene pipe

Handling transport and storage of steel pipe bends tees valvesand fittings Parts 1, 2 and 3

Transport and handling of cast iron pipes

Offtakes and pressure regulating installations for inlet pressuresbetween 7 and 100 bar

Petroleum and natural gas industries - Formulae and calculationfor casing, tubing, drill pipe and line pipe properties

Petroleum and natural gas industries - Application of cementlining to steel tubular goods, handling, installation and joining

Petroleum and natural gas industries - Pumping units -Specification

Oil and natural gas industries - Steel line pipe

Natural gas - Calculation of calorific values, density, relativedensity and wobble index from composition

Safe handling and transport of LPG in bulk in road tankers andtank containers

Recommendations for LPG-air plants

Installation and Maintenance of Bulbe LPG storage atConsumer's Premises

A,Em,Hy

A,Em5Hy

A,Em

PSS

PDS

PDS

A,Em PSS

A,Em

A,Em,Hy

A,Em

A,Em

TS

PDS

SS

PSS

A,Em PSS

A,Em

A,Em

HEC

HEC

HEC

HEC

HEC

PSS

PDS

OS

PSS

PDS

PDS

OS

A,Em

A,Em

Em

PSS

PDS

PSS

- 1 0 1 -



TYPE

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY





Fuel Gas Installations LPGA CP 15 Parts 19861,2











Fuel Gas Installations NFPA 59A

General CAP 51

General CAP 51

General CAP 51

General CAP 51

LPGA CP 19

LPGA CP 20

LPGA CP 21

LPGA CP 22

LPGA CP 24

LPGA CP 7

NFPA 58

NFPA 59

1986

1986

1986

1990

1992

1986

1979

1979

Recommendations for the safe handling of LPG in small trailer A,Emmounted vessels skid tanks and small bulk storage vesselspermanently attached to mobile gas fired equipment

Recommendations for the safe handling of LPG used as an A,Eminternal combustion engine fuel for motor vehicles

Recommendations for the safe filling of LPG cylinders at depots A,Em

Recommendations for the use operation inspection testing and A,Emmaintenance of LPG hose assemblies and associated equipment

Valves for LPG cylinders A,Em

Pipeline API5L

Purging LPG vessels and systems

Recommendations for the safe use of LPG as a propulsion fuelfor boats yachts and other craft

Liquid measuring systems for LPG

Automotive LPG refuelling facilities

Guidelines for caravan ventilation and flueing checks

LPG piping system design and installation

LPG cylinders in residential Premises

Storage of Full and Empty LPG Cylinders and Cartridges

Storage and handling - liquefied petroleum gases

Standard of the storage and handling of liquefied petroleumgases at utility gas plants

Production, storage and handling of liquefied natural gas (LNG)

Gas Safety Ordinance

Gas Safety (Gas Supply) Regulations

Gas Safety (Installation and Use) Regulations

Gas Safety (Registration of Gas Installers and Gas Contractors)Regulations

1995(1997) Specification for Line Piping HKCG

PSS

PSS

PSS

PSS

PDS

A,Em

A,Em

A, Em

A,Em

A,Em

A, Em

A,Em

Em

A,Em,HEC

A,Em,HEC

HEC

PDS

PSS

PDS

PDS

TS

PSS

PDS

PSS

PSS

PSS

PSS

TR

TR

TR

TR

PDS

- 102-



TYPE

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

AS/NZS4130

ASMEB16.5

ASMEB16.9

BGC/PS/P1

BGC/PS/P13

BGC/PS/PL2: Part1

BGC/PS/V7: Part1

BGC/PS/V7: Part2

BGES/P2

BS 1387

BS 143 & 1256

BS 1360: Section3.1

BS 1640: Part 1

BS 1640: Part 2

BS 1640: Part 3

BS 1640: Part 4

BS21

1997

1996

1993

1976

1984(1987)

1986

1988

1986

1994

1985

1986(1995)

1989(1995)

1962

1962

1968

1968

1985 (1990)

Polyethylene (PE) pipes for pressure applications

Pipe Flanges and Flanged Fittings

Factory-made wrought steel butt welding fittings

Specification for the welding of steel pipe for distributionsystems and installations (operating at pressures below 7 bar)

Specification for the partial penetration butt welding, sockets and HKCGfillet welding of steel pipe and fittings for operating pressures upto 7 bar.

Technical specification for polyethylene pipes and fittings for HKCGnatural gas and suitable manufactured gas - Pipes

Metal bodied valves (80mm to 300mm nominal size) suitable for HKCGuse in the pressure ranges up to 2 bar and up to 7 bar

Plastics bodied valves of sizes up to 63mm suitable for operation HKCGat pressures not exceeding 4 bar

Technical specification for welding of land pipelines and HKCGinstallations designed to operate at pressures greater than 7 bar(Incorporating BS 4515)

Specification for screwed and socketed steel tubes and tubulars HKCGand for plain end steel tubes suitable for welding or for screwingtoBS21 pipe threads

Specification for malleable cast iron and cast copper alloythreaded pipe fittings

Specification for steel flanges

Wrought carbon and ferritic alloy steel fittings

Wrought and cast austenitic chromium nickel steel fittings

Wrought carbon and ferritic alloy steel fittings. Metric Units

Wrought and cast austenitic chromium-nickel steel fittings.Metric units

Specification for pipe threads for tubes and fittings wherepressure-tight joints are made on the threads (metric dimensions)

HKCG

HKCG

HKCG

HKCG

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

HKCG

HKCG

HKCG

HKCG

HKCG

HKCG

PDS

PDS

PDS

PDS

PDS

PDS

HKCG PDS

-103-



TYPE

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

BS2971

BS 3293

BS3601

BS 3974: Parti 1974(1981)

BS 3974: Part 2 1978

BS 4504: Section 1989(1993)3.1

BS4515 1996

BS5150 1990

BS7281 1990

BS7336 1990

BS 7361: Parti 1991

BS8313 1997

BS 864: Part 2 1983(1992)

BS EN 1057

BS EN 1092: Part 19972

1991 Specification for class II arc welding of carbon steel pipework for HKCGcarrying fluids

1960 Specification for carbon steel pipe flanges (over 24 inchesnominal size) for the petroleum industry

1987 Specification for carbon steel pipes and tubes with specified

room temperature properties for pressure purposes

Pipe hangers, slider and roller type supports

Pipe clamps, cages, cantilevers and attachments to beams

Specification for steel flanges

Welding of steel pipelines on land and offshore

Specification for cast iron gate valves

Polyethylene pipes for the supply of gaseous fuels

Polyethylene fusion fittings with integral heating element(s) foruse with polyethylene pipes for the conveyance of gaseous fuels

Cathodic protection : Code of practice for land and marineapplications

Code of practice for accommodation of building services in duct

Specification for capillary and compression fittings for coppertubes

1996 (1997) Copper and copper alloys seamless round copper tubes for waterand gas in sanitary and heating applications

Cast Iron flanges

HKCG

HKCG

HKCG

HKCG

HKCG

HKCG

HKCG

HKCG

HKCG

HKCG

PSS

PDS

PDS

PDS

PDS

PDS

PSS

PDS

PDS

PDS

HKCG

BS EN 969 1996 Ductile iron pipes, fittings, accessories and their joints for gaspipelines - Requirements and test methods

GB 15558 1 1995 Buried polyethylene (PE) pipes for the supply of gaseous fuels

GBE/B4 1993 Technical specification for carbon and carbon manganese steelbends 50mm to 400mm inclusive nominal size produced fromseamless pipe for operating pressures greater than 7 bar

PSS

HKCG

HKCG

HKCG

HKCG

HKCG

HKCG

HKCG

PDS

PDS

PDS

PDS

PDS

PDS

PDS

- 104-



TYPE

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

GBE/B7

GBE/ECP1

GBE/F1

GBE/F3

GBE/F8

GBE/LX1

GBE/LX4

GBE/PL2:Part4

GBE/PL2: Part 6

GBE/PL3

GBE/T1

GBE/T2

GBE/V6: Part 1

1993

1992

1993

1993 (1995)

1993

1993 (1994)

1993

1993 (1994)

1993 (1994)

1993

1993 (1994)

1993 (1995)

1994

Technical specification for carbon and carbon manganese steel HKCGbends equal to or greater than 450mm nominal size for operatingpressures greater than 7 bar

HKCG

HKCG

HKCG

HKCG

HKCG

HKCG

Code of practice for corrosion control of buried steel and ductileiron pipework

Technical specification for carbon and carbon manganese steelforging and forged components for operating pressures greaterthan 7 bar

Technical specification for carbon and carbon manganese steelreducers 50mm to 1050mm inclusive nominal size for operatingpressures greater than 7 bar

Technical specification for carbon and carbon manganese steelbutt welding end caps

Technical specification for submerged-arc welded pipe 400mmto 1400mm inclusive nominal size for operating pressures greaterthan 7 bar

Technical specification for seamless pipe 150mm to 450mminclusive nominal size for operating pressures greater than 7 bar

Fusion fittings with integral heating element(s)

Spigot end fittings for electrofusion and/or butt fusion purposes

Technical specification for self anchoring mechanical fittings forpolyethylene pipe for natural gas and suitable manufactured gas

Technical specification for carbon and carbon manganese steel HKCGtees equal to or greater than 450mm nominal size produced fromplate for operating pressures greater than 7 bar

Technical specification for carbon and carbon manganese steel HKCGtees 50mm to 450mm inclusive nominal size produced fromseamless pipe for operating pressures greater than 7 bar

Technical specification for steel valves for use with natural gas at HKCGnormal operating pressures above 7 bar - 100mm nominal sizeand above

PDS

PSS

PDS

PDS

PDS

PDS

PDS

HKCG

HKCG

HKCG

PDS

PDS

PDS

PDS

PDS

PDS

-105-


SUBGROUP NUMBER YEAR TITLE USER TYPEORGANISATION

Pipeline GBE/V6: Part 2 1993 (1994) Technical specification for steel valves for use with natural gas at HKCG PDSnormal operating pressures above 7 bar - 80mm nominal size andbelow

Pipeline IGE/TD/1 1993 Steel Pipelines for High Pressure Gas Transmission (Edition 3) HKCG PDS(reprint with amendments : 1995)

Pipeline IGE/TD/9 1986 (1990) Offtakes and Pressure-regulating Installations for the Inlet HKCG PDSPressures between 7 and 100 Bar.

Pipeline ISO 4437 1997 Buried polyethylene (PE) pipes for the supply of gaseous fuels - HKCG PDSMetric series - Specifications

Pipeline prEN 1555 1997 Plastics piping systems for the supply of gaseous fuels - HKCG PDSPolyethylene (PE)

Blasting BS3618: Section 1972(1987) Glossary of mining terms-drilling and blasting A,C,H,HEC,Hy,T,W OS6

Blasting BS 5607 1988 Code of practice for safe use of explosives in the construction A,C,H,HEC,Hy,T,W PSSindustry

Blasting BS 6657 1986 Guide to prevention of inadvertent initiation of electro- A,AAHK,C,H, PSSexplosives devices by radio-frequency radiation HEC,Hy,MTRC,T,

W

Cavern Works BA and FSD 1994 Guide to fire safety design for caverns A,B,C,D,H,HEC, PSSHy,T,W

Cavern Works GEO 1992 Geoguide 4 - Guide to cavern engineering A3,C,H,HEC,Hy,T, PSSW

Earth Retaining Wall BS 8002 1994 Code of practice for earth retaining structures A,B,C,D,H,HEC, PSSHy,T,W

Earth Retaining Wall GEO Geotechnical manual for slopes A,B,C,D,H,T,W OS

Earth Retaining Wall GEO 1993 Geoguide 1 - Guide to retaining wall design A,B,C,D,H,HEC, PSSHyXW

Earth Retaining Wall GEO 1989 Geospcc 2 - Model specification for reinforced fill structures A,B,C,D,HyXW PDS

Excavation & Site BS 6031 1981 Code of practice for earthworks A,AAHKX\HEC, PSSFormation MTRC

- 106-

GROUP

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GAS SUPPLY

GEOTECHNICAL &EARTHWORKS












GEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKS

GEOTECHNICAL &EARTHWORKSGEOTECHNICAL &EARTHWORKSHIGHWAYS

Excavation & SiteFormation

BS 6164 1990

Excavation & Site GEO Report No. 1996Formation 36

Geotechnical Works ASTM C 1242

Geotechnical works BS 1924 1990

Geotechnical works BS 1924: Part 1 1990

Geotechnical Works BS 8081 1989

Geotechnical Works BS EN ISO 10319 1996

Geotechnical Works GEO




1995

1989

1989

Ground Investigation BS 4019: Part 1 1974

Ground Investigation BS 5930

Ground Investigation GEO

Ground Investigation GEO

Bridges AASHTO

1981

1987

1988

1983

Code of practice for safety in tunnelling in the constructionindustry

Methods of test for soils in Hong Kong for Civil Engineeringpurposes (phase I tests)

Guide for Design, Selection and Installation of Stone Anchors,and Anchoring Systems

Stabilised materials for civil engineering purposes

General requirements, sampling, sample preparation and tests onmaterials before stabilisation

Code of practice for ground anchorages

Geotextiles. Tensile test for joints/seams by wide-width method AAHK

MTRC

A,AAHKC,D,H,HEC,Hy,T,W

MTRC

A,C,Em,H,HEC,Hy,MTRC,T,W

A,HEC,Hy,T5W

AAHK,MTRC

PSS

TS

PSS

PDS

TS

PSS

TS

Geotechnical manual for slopes

Geoguide 5 - Guide to slope maintenance

Geospec 1 - Model specification for prestressed ground anchors

Geospec 2 - Model specification for reinforced fill structures

Basic equipment

Code of practice for site investigations

Geoguide 2 - Guide to site investigation

Geoguide 3 - Guide to rock and soil descriptions

Guide specification for seismic design of highway bridges

A,AAHK,B,C,D, OSEp,H,HEC,HysT,W

A,C,D,E,Ep,H, PSSHEC,Hy,T,W

A,AAHK,B,C,D,H, PDSHEC,Hy,T,W

A,AAHK,B,C,D,H, PDSHEC,Hy,T,W

H TS

A,AAHK,C,D,H, PSSHEC,Hy,MTRC,T,W

A,B,C,D5H,Hy,T,W PSS

A,AAHK,B,C,D,H, OSHEC,Hy,T,W

Hy PSS

- 1 0 7 -



HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

Bridges

Bridges

Bridges

Bridges

Bridges

Bridges

Bridges

Bridges

Bridges

Bridges

Bridges

Bridges

Bridges

Bridges

Bridges

Bridges

AASHTO 1991

BS 5400

BS 5400: Parti 1988

BS 5400: Part 10 1980

BS 5400: Part 2 1978

BS 5400: Part 3 1982

BS 5400: Part 4 1990

BS 5400: Part 5 1979

BS 5400: Part 6 1980

BS 5400: Part 7 1978

BS 5400: Part 8 1978

BS 5400: Part 9 1983

BS 5400: Section 19839.1

BS 5400: Section 19839.2

BS 6779: Parti 1998

BS 6779: Part 2 1991

Guide specification and commentory for vessel collision design Hy PSSof highways bridges

Steel, concrete and composite bridges

Steel, concrete and composite bridges - general statement

Steel, concrete and composite bridges - code of practice forfatigue

Steel, concrete and composite bridges - specification for loads

Code of practice for design of steel bridges

Code of practice for design of concrete bridges

Code of practice for design of composite bridges

Specification for materials and workmanship, steel

A,AAHK,B,C,H, PSSHEC,Hy,MTRC,T

A,B,C,HEC,Hy,T,W OS

A,B,HEC,Hy,T,W PSS

A,AAHK,C,HEC, PSSHy,MTRC,T,W

A,B,C,H,HEC,Hy,T, PSSW

A,AAHK,C,HEC, PSSHy,MTRC,T,W

A,B,C,HEC,Hy,T,W PSS

A,AAHK,B,H, PSSHEC,Hy,MTRC,T,W

A,HEC,Hy,T,W PSSSpecification for materials and workmanship, concrete,reinforcement and prestressing tendons

Recommendations for materials and workmanship, concrete, A,lfECJly,T,W PSSreinforcement and prestressing tendons

Bridge bearings

Code of practice for design of bridges bearings

Specification for materials, manufacture and installation ofbridge bearings

Specification for vehicle containment parapets of metal llECJIy PDSconstruction

Specification for vehicle containment parapets of concrete Hy PDSconstruction

A,AAHK,B,C,HEC\ PDSHy,T,W

A3JIBC,Hy/!YW PSS

A,AAHKjyiEC PSSHy,MTRC/I\W

- 108-



TYPE

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

Bridges

Bridges

Bridges

Bridges

Bridges

Bridges

Bridges

Bridges

Bridges

Bridges

Bridges

BS 6779: Part 3

BS 8004

DIN 1072

DIN 1075

DIN 18809

DOT 37/88

DOT 58/94

DOT BE 5

DOT BE 6

HyD

Concrete Carriageway BS 1134

Concrete Carriageway BS 1134: Part 1

Concrete Carriageway BS 1134: Part 2

Concrete Carriageway BS 5212

1994

1986

1985

1981

1987

DIN 4227: Part 3 1983

1989

1994

1982

1967

1997

1988

1990

1990

Concrete Carriageway BS 5212: Part 1 1990



Concrete Carriageway GSCEW 1992

Concrete Carriageway GSCEW 1992

Concrete Carriageway RD/GN/013 1990

Specification for vehicle containment parapets of combinedmetal and concrete construction

Code of practice for foundations

Road bridges, design loads

Concrete bridges, design and construction

Steel road & footway bridges; dimensioning, design construction

Prestressed concrete, structural members in segmentalconstruction; design & execution of joints

Loads for Highway Bridges

The design of concrete highway bridges and structures withexternal and unbonded prestressing

The design of highway bridge parapets

Expansion joints for use in highway bridge decks

Structures design manual for highways and railways (2ndedition)

Assessment of surface texture

Methods and instrumentation

Guidance and general information

Cold applied joint sealant systems for concrete pavements

Specification for Joint Sealants

Code of practice for the application and use of joint sealants

Methods of Test

Surface regularity of concrete carriageway

Testure depth of concrete carriageway

Unreinforced concrete slabs for rigid pavement

Hy PDS

A,C,HsHEC,Hy,T,W PSS

A,HEC5Hy,T PSS

A,HEC,Hy,T PSS

A,HEC,Hy,T PSS

A,HEC,Hy5T PSS

A,B,C,HEC,Hy,T,W OS

HEC,Hy PSS

HEC,Hy PSS

HEQHy PDS

A,B,C,HEC,HyJ,W PSS

B

AAHK,B,HEC

AAHK,B,HEC

A,AAHK,H,HEC,Hy,MTRC




C,HEC

C,HEC

A,HEC,Hy,T,W

TS

TS

TS

PDS

PDS

PSS

TS

TS

TS

PDS

-109-



HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

Concrete Carriageway RD/GN/020

Concrete Carriageway UKRRL RoadNote 27

Flexible Surfacing

Flexible Surfacing

Flexible Surfacing

Flexible Surfacing

Flexible Surfacing

Flexible Surfacing

Flexible Surfacing

Footway

Footway

Footway

Footway

Footway

Footway

Footway

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

BS 6677

GSCEW

GSCEW

GSCEW

RD/GN/010A

RD/GN/011A

UKRRL Road

Note 27

BS 3049

BS5931

BS 7263

BS 7263: Parti

BS7818

RN9

RN9A

BSEN124

CAP 368

CAP 370

CAP 374

1995 Panelling design & joint construction of concrete slabs

1969 Instructions for using the portable skid-resistance tester

1986( 1997) Clay and calcium silicate pavers for flexible pavement

1992 Surface regularity of final layer of pavement

1992 Permeability of fiction course material

1992 Texture depth of bituminous road surfacing

1995 Glossary of terms commonly used in flexible pavement

construction

1994 Noise reducing highway surfacing

1969 Skid resistance of compacted bituminous paving materials

1976 Specification for pedestrian guard rails (metal)

1980 Code of practice for machine laid in situ edge details for pavedareas

Precast concrete flags, kerbs, channels, edgings and quadrants

1990 Specification

1995 Specification for pedestrian restraint systems in metal

1986( 1990) Precast concrete paving blocks - code of practice for laying

1997 Precast concrete unit paving system

1994 Gully tops and manhole tops for vehicular and pedestrian areas,

Design requirements, type testing, marking, quality control

Road Tunnels (Government) Ordinance

Roads (works. Use and Compensation) Ordinance

Road Traffic Ordinance

A9HEC,HKT,Hy,T,W

A,HEC,Hy,T

A,D,HEC,Hy,T

C.HEC

C,HEC

C,HEC

A,Hy,T,W

A,Hy,T,W

A,CfD,Em,H,HEC,Hy,T,W

Hy

A,AAHK,H,HEC,Hy,MTRC\T,W

AIXHEQHy,MTRC,T,W


Hy,MTRC

A,DJiECJ]yXW

A,D,HEC,HKT,Hv,T,W

A,AAilK,HK*r

PSS

TS

PDS

TS

TS

TS

OS

PDS

TS

PDS

PSS

PDS

PDS

PDS

PSS

PDS

PSS

TR

TR

TR

- 110-


GROUP

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

SUBGROUP

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Pavement Design

Pavement Design

Pavement Design

Pavement Design

Pavement Design

Pavement Design

Pavement Design

Pavement Drainage

Pavement Drainage

Pavement Drainage

Pavement Testing

Pavement Testing

Paving Design

Paving Testing

Road Lighting

Road Lighting

NUMBER

CAP 374

HyDTC4/91

HyDTC 4/96

RD/GN/014A

TPDM Vol. 9

BS 7533

CAP 123

HyD

RD/GN/012

RD/GN/017

RN5

TPDM Vol 2

HOI 9/85

RN6

RN8

RD/GN/009

RD/GN/012

RD/GN/008

RD/GN/001

APLE

BS4533

YEAR

1991

1996

1996

1992

1996

1990

1993

1983

1985

1994

1986

1989

1990

1989

TITLE

Road Traffic (Traffic Control) Regulations

Appendix to the code of practice for the lighting signing andguarding of road works describing the requirements for works onexpressways

Code of practice for the lighting, signing and guarding of roadworks

Permanent trench reinstatement

Public transport

Guide for structural design of pavements constructed with clay orconcrete block pavers

Building (Private Streets and Access Roads) Regulations

Pavement design manual

Soil test for pavement design

Guidance notes on pavement design

Road surface requirements for high speed roads

Highway design characteristics

Road gully pots

Road pavement drainage

Sub-soil drainage

Road testing

Soil test for pavement design

Asphaltic overlay design

Pavement deflection by Benkelman Beam

Technical reports: No. 7 Section 2: Specification for masts andfoundations

Luminaries

USERORGANISATION

HEC,Hy,T,W

Hy,T,W

A,HEC,HKT,Hy,T,W

HEC

A,D,HEC,Hy,T,W

A,Hy,T,W

A,HEC,Hy,T,W

A,HEC,Hy,T5W

A,Hy,T,W

A,HEC,Hy,T,W

A,HEC,Hy,T,W

A,Hy,T,W

A,HEC,Hy,T,W

A,HEC,Hy,T,W

A,HEC,Hy,T,W

A,Hy,T,W

A,C,D,Em,H,HEC,Hy,T,W

A,Em,Hy

Hy

TYPE

TR

OS

PSS

PSS

OS

PSS

TR

PSS

TS

PSS

PDS

PDS

PDS

PDS

PDS

TS

TS

PSS

TS

PDS

PDS

- 1 1 1 -



TYPE

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

BS 4533: Part 101

BS 4533: Part 2







BS 5489: Part 1

BS 5489: Part 10

BS 5489: Part 2

BS 5489: Part 3

BS 5489: Part 4

BS 5489: Part 5

BS 5489: Part 6

BS 5489: Part 7

BS 5489: Part 8

BS 5489: Part 9

1990

1979

1990

1990

1990

1990

1990

1981

1992

1992

1992

1992

1992

1992

1992

1992

1992

1992

Specification for general requirements and tests

Detail requirements

Specification for fixed general purpose luminaires


Specification for luminaires for road and street lighting


Specification for luminaires with built-in transformers forfilament lamps

Specification for light distribution from road-lighting lanterns

Road lighting - guide to the general principles

Road lighting - code of practice for lighting of motorways

Road lighting - code of practice for lighting for traffic routes

Road lighting - code of practice for lighting for subsidiary roadsand associated pedestrian areas

Road lighting - code of practice for lighting for single-level roadjunctions including roundabouts

Road lighting - code of practice for lighting for grade-separatedjunctions

Road lighting - code of practice for lighting for bridges andelevated roads

Road lighting - code of practice for lighting for tunnels andunderpasses

Road lighting - code of practice for lighting for roads nearaerodromes, railways, docks and navigable water-ways

Road lighting - code of practice for lighting for urban centres andpublic amenity areas

Hy

Hy

Hy

Hy

A,HEC,Hy,T,W

Hy

Hy

A,HEC,Hy,T

A,HEC,Hy,T

A,HEC,Hy,T

A,HEC,Hy,T

A,HEC,Hy/r

A,HEC,Hy,T

A,HECHy,T

AJ-IECHy/r

AJIECJIy/r

A,HEC,Hy,T

AJIECilv.T

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

- 112-



TYPE

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Lighting

Road Making

Road Marking

Road Marking

BS 5649

BS 5649: Part 1

BS 5649: Part 2

BS 5649: Part 3

BS 5649: Part 4

BS 5649: Part 5

BS 5649: Part 6

BS 5649: Part 7

BS 5649: Part 8

BS 5649: Part 9

BS 5972

BS EN 40-1

BS EN 60598-2-2

BS EN 60598-2-3

HyD

HyDTC 2/92

HyDTC 4/92

TPDM Vol. 3

BS 3262

BS 3262: Part 1

1978

1978

1982

1982

1982

1982

1985

1982

1982

1980

1992

1997

1994

1996

1992

1992

1989(1985)

Lighting columns

Definitions and terms

Dimensions and tolerances

Specification for materials & welding requirements

Recommendations for surface protection of metal lightingcolumns

Specification for base compartments and cableways

Specification for design loads

Method for verification of structural design by calculation

Method for verification of structural design by testing

Specification of special requirements for reinforced &prestressed concrete lighting columns

Specification for photoelectric control unit for road lighting

Lighting columns - Definitions and terms


Specification for luminaires for road and street lighting

Public lighting design manual

Design guidance note and model electrical specification forlighting installations serving highways structures such asfootbridges, subways, covered walkways

Guidelines on the adoption of road lighting design based on BS5489 Part 2 (1987)

Traffic signs and road markings

Hot-applied thermoplastic road marking materials

Specification for constituent materials and admixtures

A,AAHK,HEC,Hy,T

A,HEC,Hy,T,W

A,HEC,Hy,T,W

A,HEC,Hy,T,W

A,HEC,Hy,T,W

A,HEC,Hy,T,W

A,HEC,Hy,T,W

A,HEC,Hy,T,W

A,HEC,Hy,T,W

A,HEC,Hy,T,W

A,HEC,Hy,T

A,Hy,T,W

A,H,Hy

A,H,Hy,W,T

A,Hy,T

A,HEC,Hy,T

A,HEC,Hy,T

A,HEC,Hy


A,AAHK,C,D,EmsH,HEC,Hy,MTRC,T,W

PDS

OS

OS

PDS

PDS

PDS

PSS

PSS

TS

PDS

PDS

OS

PDS

PDS

PSS

PSS

PSS

PDS

PDS

PDS

- 1 1 3 -



TYPE

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

Road Marking

Road Marking

Road Marking

Road Marking

BS 3262: Part 3

BS 6044

BS 6088

BS EN 1423

1989 Specification for application of material to road surfaces

Road Marking HOI 8/85

Road Marking HyDTC 29/97

Road Marking RN 7

Road Paving Materials ASTM D 546



Road Paving Materials BS 1447


Road Paving Materials BS 434: Part 1


Road Paving Materials BS 4987: Part 1Part 2




1987(1995) Specification for pavement marking paints

1981(1985) Specification for solid glass beads for use with road markingcompounds and for other industrial uses.

1998 Road marking materials. Drop on materials. Glass beads,

antiskid aggregates and mixtures of the two

1985 Road studs for trunk road

1997 Road studs for trunk road

1988 Thermoplastic road marking materials

1988 Method for sieve analysis of mineral filler for road and pavingmaterials

1982 Specification for penetration-graded asphalt cement for use inpavement construction

1987 Methods of sampling bituminous paving mixtures

Road Paving Materials ASTM Vol. 04.04 1988 Road and paving materials; travelled surface characteristics

1988 Specification for mastic asphalt (limestone fine aggregate) forroads, footways and pavings in building

1984 Bitumen road emulsions (anionic and cationic)

1984 Specification for bitumen road emulsions

1984 Code of practice for use of bitumen road emulsions

1993 Coated macadam for roads and other paved areas

1987 Road aggregates

1987(1994) Specification for singlcd-sized aggregate for surface dressing

1974(1994) Specification for tars for road purposes

AAHK,HEC,Hy,MTRC,T,W

AAHK,C,HEC,Hy,MTRC,T,W

A,AAHK,C,D,Em,H,HEC,Hy,MTRC,T,W

A

A,HEC,Hy,T,W

A,Hy,T,W

HEC,Hy,T,W

AAHKJIEGHy

A,AAHK,C,D,Em,H,HEC,Hy,T,W



HECJ ly

A,H,HEC,Hy,T,W

AJiHECJ iyXW

A J i H E C H y X W

A,D,H,HEC,Hy,T,W

A,HEC,H>\MTRC

H

AJIECJlv

PDS

PDS

PDS

PDS

PDS

PDS

PDS

TS

PDS

TS

PDS

PDS

PDS

PDS

PSS

PDS

PDS

PDS

PDS

- 114-



TYPE

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

HIGHWAYS

INSTRUMENT &CONTROL

INSTRUMENT &CONTROL

Road Paving Materials HyDTC 5/89

Road Paving Materials RD/GN/002B

Road Paving Materials RD/GN/006B

Road Paving Materials RD/GN/007

Road Paving Materials RD/GN/022

Traffic Signs BS 505

Traffic Signs BS 873

Traffic Signs

Traffic Signs

Traffic Signs

Traffic Signs

Traffic Signs

Traffic Signs

Traffic Signs

Traffic Signs

Traffic Signs

Traffic Signs

Traffic Signs

Traffic Signs

Instrument

Instrument

1989 Use of lean concrete roadbase for flexible pavements

1994 Bulk sampling of bituminous material

1997 Approval of private laboratories to perform design testing of

bituminous mix

1989 Centralised sampling and testing of bitumen

1996 Mix design of bituminous materials

1971 Specification for road traffic signals

Road traffic signs and internally illuminated bollards

1983 Methods of test

1984( 1996) Specification for miscellaneous signs

1980( 1996) Specification for internally illuminated bollards

1987( 1996) Specification for road studs

1983 Specification for internally illuminated signs and externallighting luminaries

BS 873: Part 6 1983(1996) Specification for retroreflective and non-retroreflective signs

BS 873: Part 7 1984( 1996) Specification for posts and fittings

BS 873: Part 8 1985(1996) Specification for traffic cones and cylinders

RD/GN/019 1995 Guidance Notes on Publicity board for motorists

TPDM Vol. 3 Traffic signs and road markings

TPDM Vol. 4 Road traffic signals

TPDM Vol. 6 Traffic and environmental management

ISA-S50.1 1982 Compatibility of analogue signals for electronic industrialprocess instruments

ISA-S82.03 1988 Safety standard for electrical and electronic test, measuring,controlling, and related equipment

BS 873: Parti

BS 873: Part 2

BS 873: Part 3

BS 873: Part 4

BS 873: Part 5

Hy

HEC,Hy

Hy

HEQHy

Hy

HEC,Hy,T,W



HKT

HKT

HKT


AAHK,H,HEC,Hy,MTRC,T,W


HKT

HKT

A,HEC,Hy

A,HEC,Hy,T,W

A,HEC,Hy,T,W

HEC

PSS

TS

TS

TS

PSS

PDS

PDS

TS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

OS

TS

HEC TS

- 115-



INSTRUMENT &CONTROL

INSTRUMENT &CONTROL

INSTRUMENT &CONTROL

INSTRUMENT &CONTROL

INSTRUMENT &CONTROL

INSTRUMENT &CONTROL

INSTRUMENT &CONTROL

INSTRUMENT &CONTROL

INSTRUMENT &CONTROL

INSTRUMENT &CONTROL

INSTRUMENT &CONTROL

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

Plant Simulator

ProgrammableControllers




Software Design

Software Design

Software Design

ISA-S77.20

IEC 1131-1

IEC 1131-2

IEC 1131-3

IEC 1131-4

IEE

IEEE 1298

IEEE 730.1

System Assessment IEC 1069-1



Colour/Chromatic Use BS 4800



Colour/Chromatic Use BS 5252F

1993

1992

1992

1993

1995

1990

1992

1995

1991

1993

1996

1989(1994)

1976

1976(1996)

1976(1996)

Fossil-fuel power plant simulators - functional requirements HEC

Programmable controllers - general information HEC

Programmable controllers - equipment requirements & tests HEC

Programmable controllers - programming languages

Programmable controllers - user guidelines

HEC

HEC

Guidelines for the documentation of computer software for real HECtime and interactive systems

Software quality management system - part 1: requirements HEC

IEEE guide for software quality assurance planning HEC

Industrial-process measurement and control - evaluation of HECsystem properties for the purpose of system assessment - generalconsiderations and methodology

Industrial-process measurement and control - evaluation ofsystem properties for the purpose of system assessment -assessment methodology

Industrial-process measurement and control - evaluation ofsystem properties for the purpose of system assessment -assessment of system functionality

Schedule of paint colours for building purposes

Specification for sheet and tile flooring colours for buildingpurposes

Framework for colour co-ordination for building purposes

Colour matching fan

HEC

HEC

A,AAHK,D,H,HECHKXHyXW

A.IXHECXW

AJXHECHy,T,W

A,AAHKI,)JiHECJiKXHyXW

PDS

PDS

PDS

PDS

PDS

PSS

SS

SS

PSS

PSS

PSS

OS

OS

OS

OS

- 116-



TYPE

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

Colour/Chromatic Use

Colour/Chromatic Use

External Works

Fencing/Railing

Fencing/Railing

Fencing/Railing

Fencing/Railing

Fencing/Railing

Fencing/Railing

Fencing/Railing

Fencing/Railing

Fencing/Railing

Fencing/Railing

Fencing/Railing

Fencing/Railing

Fencing/Railing

Fencing/Railing

Fencing/Railing

Fencing/Railing

Fencing/Railing

BS6150

SIS 01 91 02

BS 5262

BS 1387

BS 1485

BS 1722

BS 1722: Part 1

BS 1722: Part 10

BS 1722: Part 11

BS 1722: Part 12

BS 1722: Part 13

BS 1722: Part 14

BS 1722: Part 2

BS 1722: Part 3

BS 1722: Part 4

BS 1722: Part 5

BS 1722: Part 6

BS 1722: Part 8

BS 1722: Part 9

BS 3049

1991

1978

1991

1985(1990)

1983(1989)

1986

1990

1986

1990

1978

1992

1989

1986

1986

1986

1986

1997

1992

1976

Code of practice for painting of buildings

Natural colour system for chromatic use

Code of practice for external renderings

Specification for screwed and socketed steel tubes and tubularsand for plain end steel tubes suitable for welding or for screwingtoBS21 pipe thread

Specification for zinc coated hexagonal steel wire netting

Specification for chain link fences

Fences - Specification for chain link fences

Specification for anti-intruder fences in chain link and weldedmesh

Specification for woven wood and lap boarded panel fences

Specification for steel palisade fences

Chainlink fences for tennis court surrounds

Specifications for open mesh steel panel fences

Specification for rectangular wire mesh and hexagonal wirenetting fences

Specification for strained wire fences

Specification for cleft chestnut pale fences

Specification for close boarded fences

Specification for wooden palisade fences

Specification for mid steel (low carbon steel) continuous barfences and hurdles

Specification for mild steel (low carbon steel) fences with roundor square verticals and flat horizontals

Specification, pedestrian guard rails (metal)


A,D,HEC,Hy,T

A,H,HEC,T

A,C,D,HEC,Hy,T,W

A,D,H,HEC,Hy,T,W

A,D,HEC,Hy,MTRC,T,W

A,AAHK,D,HEC,Hy,T,W

A,D,Hy,T,W

A,D3HEC,HyJ,W

A,D,HEC,Hy,T,W

A,D,HEC,T,W

A,D,HEC,Hy,T,W

A,D,HEC,Hy,T,W

A,D,HEC,Hy,T,W

A,D,HEC,Hy,T,W

A,D,HECsHy,T,W

A,D,HEC,Hy,T,W

A,D,HEC5Hy,T,W

A,D,HEC,Hy,T,W

A,D,HEC,Hy,T,W

PSS

OS

PSS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

-117-



TYPE

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

Fencing/Railing

Fencing/Railing

Fencing/Railing

GroundModelling/Soiling/Cultivation





Landscape Drawings

Miscellaneous

Paving Blocks/Tiles

Paving Blocks/Tiles

Paving Blocks/Tiles

Paving Blocks/Tiles

Paving Blocks/Tiles

Paving Blocks/Tiles

BS 3987

BS4102

BS7818

BS 3882

BS 4428

BS 7370

BS 7370: Part 1

BS 7370: Part 3

BS 1192: Part 4

BS 1521

BS 7533: Part 3

ANSIA108

ASTMC1028

ASTM C 346

ASTM C 936

BS 1197: Part 2

1991 Specification for anodic oxide coatings on wrought aluminiumfor external architectural applications

1990 Specification for steel wire and wire products for fences

1995 Specification for pedestrian restraint systems in metal

1994 Specification for top soil

1989 Code of practice for general landscape operations (excludinghard surfaces)

Grounds maintenance

1991 Recommendations for establishing and managing groundsmaintenance organisations and for design considerations relatedto maintenance

1991 Recommendations for maintenance of amenity and functionalturf (other than sports turf)

1984 Construction drawing practice - recommendations for landscape

drawings

1972(1994) Specification for waterproof building papers

1997 Code of practice for laying precast concrete paving blocks andclay pavers for flexible pavementsSpecifications for Installation of Ceramic Tile

Determining Static Coefficient of Friction of Ceramic Tile andOther Like Surfaces by the Horizontal Dynamometer Pull-MeterMethod

45-deg Specular Gloss of Ceramic Materials

Specification of Solid Concrete Interlocking Paving Units

1973(1980) Specification for concrete flooring tiles and fittings - metric units

A,D,HEC,T,W

A,D,H,HEC,Hv,MTRC,T,W

A

A,HEC,Hy,T,W

A,HEC,Hy,T,W

PDS

PDS

PDS

PDS

PSS

HEC

HEC

HEC

PSS

PSS

A,HECHy/r

A,H,HEC,T

A

MTRC

MTRC

MTRC

MTRC

AJXHECJIyXW

OS

PDS

PSS

PSS

TS

PDS

PDS

PDS

- 1 1 8 -



TYPE

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

Paving Blocks/Tiles

Paving Blocks/Tiles

Paving Blocks/Tiles

Paving Biocks/Tiles

Paving Blocks/Tiles

Paving Blocks/Tiles

Paving Blocks/Tiles

Paving Blocks/Tiles

Paving Blocks/Tiles

Paving Blocks/Tiles

Paving Blocks/Tiles

Paving Blocks/Tiles

Plants & Planting

Plants & Planting

Plants & Planting

Plants & Planting

Plants & Planting

Plants & Planting

Plants & Planting

Plants & Planting

Plants & Planting

Plants & Planting

Plants & Planting

BS 3260

BS4131

BS5931

BS 5980

BS 6717; Parti

BS 6717: Part 2

BS 6717: Part 3

BS 6826

BS 7263: Part 2

RN9

RN9A

TCA

BS 3936

BS 3936: Part 1

BS 3936: Part 10

BS 3936: Part 11

BS 3936: Part 2

BS 3936: Part 3

BS 3936: Part 4

BS 3936: Part 5

BS 3936: Part 7

BS 3936: Part 9

BS 3969

1969(1991)

1973

1980

1980(1991)

1986(1997)

1989

1987

1990

1986(1990)

1997

1992

1989(1995)

1984(1989)

1990(1995)

1990(1995)

1984(1989)

1985(1992)

1989

1987

1990

1969(1991) Specification for semi-flexible PVC (Vinyl) floor tiles

Specification for terrazzo tiles

Code of practice for machine laid in situ edge details for pavedareas

1980( 1991) Specification for adhesives for use with ceramic tiles andmosaics

1986( 1997) Precast concrete paving blocks - specification for paving blocks

Installation of Precast Concrete Paving Blocks

Precast concrete paving blocks - code of practice for laying

Specification for linoleum and cork carpet sheet and tiles

Code of practice for laying

Precast concrete paving blocks - code of practice for laying

Precast concrete unit paving system

Handbook for Ceramic Tile Installation Guidelines

Nursery stock

Specification for trees and shrubs

Specification for ground cover plans

Specification for container-grown culinary herbs

Specification for roses

Specification for fruit plans

Specification for forest trees

Specification for poplars and willows

Specification for bedding plants

Specification for bulbs, conns and tubers

Recommendation for turf for general purposes

A,H,HEC

A,D,HEC,Hy,T,W

H,HEC

A,D,HEC,Hy,T,W

A,D,HEC,Hy,MTRC,T,W

MTRC

A,D,HEC,Hy,T,W

A,D,H,HEC,T

A,D,HEC,Hy,T,W

A,D,HEC,Hy,T,W

A,D,Hy,T,W

MTRC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

PDS

PDS

PSS

PDS

PDS

PSS

PSS

PDS

PSS

PSS

PDS

PSS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

- 1 1 9 -



TYPE

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

LANDSCAPING

MARINE WORKS

Plants & Planting

Plants & Planting

Plants & Planting

Plants & Planting

Plants & Planting

Play Equipment

Play Equipment

Play Equipment

Play Equipment

Play Equipment

Play Equipment

Play Equipment

Play Equipment

Play Equipment

Play Equipment

Play Equipment

Play Equipment

Water Features

Water Features

Miscellaneous

BS 3998

BS 4043

BS4156

BS 5837

SILTECH

BS 1892

BS 1892: Part 1


BS 1892: Section2.7

BS 5696

BS 5696: Part 1

BS 5696: Part 2

BS 5696: Part 3

BS 7044

BS7188

BS EN 1177

BSEN913

TDD

TDD E&MGuidance Note1/92

BS 1088

1989

1989

1990

1991

1991

1986(1991)

1990

1986(1991)

1997

1986

1979

1989

1998

1996

1991

1992

1966(1988^

Recommendations for tree work

Recommendation for transplanting root-balled trees

Recommendations for peat for horticultural and landscape use

Guide for trees in relation to construction

Tree planting and maintenance in Hong Kong

Gymnasium equipment

Specification of general requirements

Specification for safety requirements for mats, mattresses andlanding areas

Specification for basketball and mini-basketball equipment

Play equipment intended for permanent installation outdoors

General safety requirements and test methods

Specification for construction and performance

Code of practice for installation and maintenance

Artificial sports surfaces

Methods of test for impact absorbing playground surfaces

Impact absorbing playground surfacing. Safety requirementsand test methods

Gymnastic equipment. General safety requirements and testmethods

Water features for open space projects in the regional councilarea

Submission of E&M design by consultants in connection withwater features and irrigation system for open space projects

1966( 1988) Specification for plywood for marine craft

A,AAHKH,HEC,T,W

HEC

HEC

HEC

HEC

A,HEC,T

AJ1ECT

A,HEC/T

A.HECT

AJ1ECT

AJIECT

AJIEC/T

A,HEC,T

A,HECT

AiiHECT

A

PSS

PSS

PDS

PDS

PSS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PSS

PDS

TS

TS

A

AJ1ECT

A,HECT

A,AAHK,D,H,HECT

TS

[*DS

OS

PDS

- 120-



TYPE

MARINE WORKS

MARINE WORKS

MARINE WORKS

MARINE WORKS

MARINE WORKS

MARINE WORKS

MARINE WORKS

MARINE WORKS

MARINE WORKS

MARINE WORKS

MARINE WORKS

MARINE WORKS

MARINE WORKS

MARINE WORKS

MARINE WORKS

MARINE WORKS

MARINE WORKS

MARINE WORKS

MARINE WORKS

MARINE WORKS

MARINE WORKS

MARINE WORKS

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Piers & Jetties

Piers & Jetties

Piers & Jetties

Piers & Jetties

Piers & Jetties

Piers & Jetties

BS 6349: Part 1

BS 6349: Part 3

BS 6349: Part 5

BS 6349: Part 6

BS 6349: Part 7

CAP 127

CAP 281

CAP 313

CAP 313

CAP 313

CAP 353

CAP 476

CAP 476

CAP 476

CED

CED

BS 4072

BS 5589

BS 6349: Part 2

BS 6349: Part 4

BS 7295

BS 7295: Part 2

1984

1988

1991

1989

1991

1984

1992

1987

1989

1988

1985,1994

1990

Maritime structures - General criteria

Maritime structures - design of dry dock, lock, slipway &shipbuilding berth, shiplift & dock & lock gate

Maritime structures - code of practice for dredging & landingreclamation

Maritime structures - design of inshore moorings & floatingstructures

Guide to the design and construction of breakwaters

Foreshore and Seabed (Reclamations) ordinance

Merchant Shipping Ordinance

Shipping and Port Control (Cargo Handling) Regulations

Shipping and Port Control Ordinance

Shipping and Port Control Regulations

Fish Culture Zone (Designation) Order

Marine Park Ordinance

Marine Reserve (Designation) Order

Marine Parks and Marine Reserves Regulation

Shore protection manual volume I & II (4th edition)

Port works manual

Wood preservation by means of copper/chromium/arseniccompositions

Code of practice for preservation of timber

Design of quay walls, jetties and dolphins

Code of practice for design of fendering and mooring system

Fusion boarded epoxy coated carbon steel bars for thereinforcement of concrete

Specification for coating with AMD 6956

AAHK,C,Hy,MTRC,T

HEC

HEC

HEC

OS

PSS

PSS

PSS

C,HEC

C,HEC

A,C,Ep,HEC,T,W

C,HEC

C,HEC

C,HEC,Hy,T

C,HEC,Hy,T

C

PSS

TR

TR

TR

TR

TR

TR

TR

TR

TR

OS

OS

PSS

PSS

PSS

PSS

PDS

PDS

- 1 2 1 -



TYPE

MATERIALS & TESTS Metalwork ISO 2768-1

MATERIALS & TESTS Adhesives & Sealants ASTM C 1193






MATERIALS & TESTS Adhesives & Sealants ASTM D 4800

MATERIALS & TESTS Adhesives & Sealants ASTM D 545

MATERIALS & TESTS Adhesives & Sealants BS EN 301

MATERIALS & TESTS Adhesives & Sealants BS 1203


MATERIALS & TESTS Adhesives & Sealants BS 1204: Part 1







1989 General tolerances - Tolerances for linear and angulardimensions without individual tolerance indications

Guide for Use of Joint Sealants

Use of Joint Sealants

1990 Specification for Cellular Elastomeric Preformed Gasket andSealing Material

Test Method for Adhesion and Cohesion of Elastomeric JointSealants under Cyclic Movement

1986 Standard Test Method for Adhesion-in-peel of Elastomeric Joint

Sealants

Specification for Elastomeric Joint Sealants

Guide for Classifying and Specifyng AdhesivesPre-formed Expansion Joint Fillers for Concrete Construction(Non-Extruding and Resilient Types

1992 Adhesives, phenolic and aminopiastic, for load-bearing timberstructures: Classification & performance requirements

1979( 1991) Specification for synthetic resin adhesives (Phenolic andaminopiastic) for plywood

1993 Specification for type MR phenolic and aminopiastic syntheticresin adhesives for wood

1979( 1991) Gap-filling adhesives

1993 Close-contact adhesives

1973 Hot-applied joint sealants for systems for concrete pavements

1993 Specification for joint sealants

1992 Code of practice for the application and use of joint sealants


1990( 1995) Method of specifying unsaturated polyester resin system

HEC OS

MTRC PSS

MTRC PSS

A,D,HEC,MTRC,T PDS

MTRC TS

A,D,HEC,T

MTRC

MTRC

MTRC

TS

PDS

OS

PDS

A PDS

A,AAHKJ]ECilv/r PDS

AAHK,HEC,Hy PDS

A,D,H,HEC,Hy,T

A I U U i E Q T


A,C,D,Em,HEC,HyXW

liHEC

KHEC

PDS

FDS

PDS

PDS

PDS

TS

A,AAHKtD,H, HEC PSS

- 122-



TYPE

MATERIALS & TESTS

MATERIALS & TESTS

Adhesives & Sealants BS 3712




MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS




Adhesives & Sealants BS 5442: Part 1






MATERIALS & TESTS Adhesives & Sealants BS EN 301

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

Adhesives & Sealants BS EN 302

Adhesives & Sealants BS EN 302-1

Adhesives & Sealants BS EN 302-2

1994 Specification for one-part gun grade silicone-based sealants

1983(1991) Specification for two-part polysulphide-based sealants

1990 Cold poured joint sealants for concrete pavements

1990 Specification for Joint Sealants

MATERIALS & TESTS Adhesives & Sealants BS 5212: Part 2 1990

MATERIALS & TESTS Adhesives & Sealants BS 5212: Part 3 1990

Code of practice for the application and use of joint sealants

Methods of tests

1986 Specification for one-part gun grade polysulphide-based sealants

1987 Methods of test for adhesives

Classification of adhesives for construction

1989 Classification of adhesives for use with flooring materials

1989 Classification of adhesives for use with interior wall and ceiling

coverings (excluding decorative flexible materials in roll form)

1979( 1990) Adhesives for use with wood

1989 Specification for one-part gun grade silicone-based sealants1980(1991) Specification for adhesives for use with ceramic tiles and

mosaics

1982( 1992) Guide to the selection of constructional sealants

1992 Adhesives, phenolic and aminoplastic, for load-bearing timber

structure: classification and performance requirements

1992 Adhesives for load-bearing timber structures: teat methods

1992 Determination of bond strength in longitudinal tensile shear

1992 Determination of resistance to delamination (laboratory method)

H

A,C,D,Em,H,HEC,Hy,MTRC,T,W





A,H5HEC,Hy

A,HEC

H

A,D,HEC,MTRC,T

A,D,HEC,MTRC,T

A,D,HEC,Hy,T,W

H,HEC

A,H,HEC

A,D,H,HEC,MTRQT

A

A

A

A

PDS

PDS

PDS

PDS

PSS

TS

PDS

TS

OS

OS

OS

PDS

PDS

PDS

OS

PDS

TS

TS

TS

- 1 2 3 -



TYPE

MATERIALS & TESTS Adhesives & Sealants BS EN 302-3

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS 8c TESTS

MATERIALS & TESTS

MATERIALS 8c TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS 8c TESTS

MATERIALS & TESTS

MATERIALS & TESTS

Adhesives & Sealants

Adhesives & Sealants

Aggregates

Aggregates

Aggregates

Aggregates

Aggregates

Aggregates

Aggregates

Aggregates

Aggregates

Aggregates

Aggregates

Aggregates

Aggregates

BS EN 302-4

BS ISO 11600

ASTMC117

ASTMC 127

ASTM C 128

ASTMC 131

ASTM C 289

ASTM C 33

ASTM C 535

ASTM C 88

ASTM D 2922

BS 119

BS 1199&BS1200

BS 3681: Part 2

BS 3797

1992

1993

1987

1981

1981

1976

1978

1976

1976

1973

1990

1992 Determination of the effect of acid damage to wood fibres bytemperature and humidity cycling on the transverse tensilestrength

Determination of the effects of wood shrinkage on the shearstrength

Building construction - Sealants - Classification andrequirements

Test method for material finer than 75mm (no. 200) sieve inmineral aggregates by washing

Test method for specific gravity and absorption of coarseaggregate

Test method for specific gravity and absorption of fine aggregate

1981(1987) Test method for resistance to degradation of small-size coarseaggregate by abrasion and impact in the Los Angeles machine

Test method for potential reactivity of aggregates (chemicalmethod)

Concrete Aggregates

Test method for resistance to degradation of large-size coarseaggregate by abrasion and impact in the Los Angeles Machine

Test method for soundness of aggregates by use of sodiumsulphate or magnesium sulphate

Test methods for density of soil and soil-aggregate in place bynuclear method (shallow depth)

Specifications for building sands from natural sources

Specifications for building sands from natural sourcevS

concrete

Specification for lightweight aggregates for masonry units andstructural concrete

TS

A

HEC


A,AAHK,C,Em,H,HEC,Hy,T,W

A9AAHK,C,Em,H,HEC,Hy,T,W

A,C,D,Em,H,Hy,T,W

A,Em,H,HEC,Hy,T,W

MTRC

A,D,Em,H,HEC,HysT,W

A,D,Em,H,HEC,Hy,MTRC,T,W

A,D,Em,H,HEC,Hy/F,W

HEC

A,AAI IK,B,D,Em,H,HEC,Hy,MTRC,T,W

A,Em,H,HEC,Hy,T

A,D,Em,H,HEC,Hy,T,W

TS

OS

TS

TS

TS

TS

TS

PDS

TS

TS

TS

PDS

PDS

TS

PDS

-124-



MATERIALS & TESTS Aggregates













BS 410 1986(1995) Specification for test sieves

BS 53: Part 2 1987(1994) Specification for singled-sized aggregate for surface dressing

BS 6100: Section 1984 (1995) Aggregates6.3

BS812

BS 812: Part 1 1975

BS 812: Part 101 1984

BS 812: Part 102 1989

BS 812: Part 103

BS 812: Part 105

BS 812: Part 106 1985

BS 812: Part 110 1990

BS 812: Part 111 1990

BS 812: Part 112 1990

Testing aggregates

Methods for determination of particle size and shape

Guide to sampling and testing aggregates

Methods for sampling

Methods for determination of particle size distribution

Methods for determination of particle shape

Method for determination of shell content in coarse aggregate

Methods for determination of aggregate crushing value (ACV)

Methods for determination often per cent fines value (TFV)

Method for determination of aggregate impact value (AIV)

A,B,C,H,HEC,W TS

HEC PDS

MTRC OS

A,AAHK,B,C,D, TS

Em,H,HEC,Hy,MTRC,T,W

A,C,H,MTRC TS

A,AAHK,C,D5Em,H TS,HEC,Hy,MTRC,T,W

A,AAHK,C,D,Em,H TS,HEC,Hy,MTRC,T,W


A,AAHK,C,D,Em,H TS,HEC9Hy,MTRC,T,W

A,C,D,Em5H}HEC, TSHy,T,W

A,AAHK3C,Em,H, TSHEC,Hy,MTRC,T,W

A,AAHK,C,Ern,H, TSHEC,Hy,MTRC,T,W

A,AAHK,C,Em,H, TSHEC,Hy,MTRC,T,W

-125-



TYPE















BS 812: Part 113 1990

BS 812: Part 117 1988

BS 812: Part 118 1988

BS 812: Part 119 1985

BS 812: Part 120 1989

BS 812: Part 121

BS 812: Part 2

BS 812: Part 4

BS812: Section103.1

BS812: Section103.2



BS882

BS882

1989

1975

1976

1985

1989

1989

1990

1992

Method for determination of aggregate abrasion value (AAV)

Method of determination of water-soluble chloride salts

Methods for determination of sulphate content

Determination of acid-soluble material content of fine aggregate

Methods for testing and classifying drying shrinkage ofaggregates in concrete

Methods for determination of soundness

Methods for determination of physical properties

Chemical proportions

Sieve tests

Sedimentation test

Flakiness index

Elongation index of coarse aggregate

Specification for aggregates from natural sources for concrete

Specification for aggregates from natural sources for concrete

A,AAHK,C,Em,H,HEC,Hy,MTRC,T,W

A,AAHK,C,Em,H,HEC,Hy,T,W

TS

TS

TS


A,MTRC

A

TS

TS

A,AAHK,B,C,Em,H,HEC,Hy,T,W

A,C,Em,H,HEC,Hy,T,W

A,AAI IKX\D,Em,H,HEC,Hy,MTRC,T,W

A,AAI !K,C,DXm,H,HEC,Hy,MTRC,T,W

A,AAHK,C,Em,H,HEC,Hy,MTRC,T,W

A,AAHKX\EniJiHEC,Hv,MTRC,T,W

AJUUXILT

A,AAHKJU\D,Km,H,HI-X\HKT.HwMTRCXW

TS

TS

TS

TS

TS

TS

PDS

PDS

-126-



MATERIALS & TESTS Asphalt/Bitumen
















ASTM C 136

ASTMC4125

ASTM D 113

ASTM D 1188

ASTMD 140

ASTM D 1559

ASTMD 1664

ASTMD 1754

ASTM D 2027

ASTMD 2041

ASTM D 2042

ASTMD 2171

ASTMD 2172

ASTM D 242

ASTM D 2726

ASTM D 3202

1983

1985(1986)

1989

1988(1993)

1982

1980

1987

1976(1986)

1978

1981(1985)

1985(1988)

1988

1985

1988

1983

Method for sieve analysis of fine and coarse aggregates

Test method for asphalt content of bituminous mixtures by thenuclear method

Test method for ductility of bituminous materials

Standard test method for bulk specific gravity and density ofcompacted bituminous mixtures using paraffin-coated specimens

Method for sampling bituminous materials

Test method for resistance to plastic flow of bituminous mixturesusing Marshall apparatus

Test method for coating and stripping of bitumen-aggregatemixtures

Test method for effect of heat and air on asphaltic materials(thin-film oven test)

Specification for cutback asphalt (medium - curing type)

Test method for theoretical maximum specific gravity ofbituminous paving mixtures

Test method for solubility of asphalt materials intrichloroethylene

Test method for viscosity of asphalts by vacuum capillaryviscometer

Test method for quantitative extraction of bitumen frombituminous paving mixtures

Specification for mineral filler for bituminous paving mixtures

Test method for bulk specific gravity of compacted bituminousmixtures using saturated surface-dry specimens

Testing method for percentage air voids in compacted dense andopen bituminous paving mixtures

A,AAHK,C,D,Em,H TS,HEC,Hy,T,W

A,D,Em,H,HEC, TSHy,T,W


HEC,Hy TS

A,AAHK,C,D,Em,H TS,HEC,Hy,T5W

A,AAHK,C,D,Em5H TS,HEC,Hy,T,W

A,D,Em,HsHEC,Hy,T,W

AAHK,HEC,Hy TS

AAHK,C,HEC PDS


HEQHy TS

A,AAHK,C,D,Em,H TS,HEQHy,T,W

A,AAHK,CAEm5H TS,HEC,Hy,T,W

A,AAHK,C,D5Em,H PDS,HEC,Hy,T,W

AAHK,C,HEC TS

A,AAHK,D,Em,H, TSHEC,Hy,T,W

- 127-



TYPE
















ASTMD3203 1988

ASTMD3289 1985

ASTMD5 1986

BS 2000

BS 2000: Part 45 1993

BS 2000: Part 47 1993

BS 2000: Part 49 1993

BS 2000: Part 58 1993

BS 3690

BS 3690: Parti 1989

BS 3690: Part 2 1989

BS3690:Part3 1990

BS434

BS 434: Part 1

1984

1984

BS 434: Part 2 1984

Test method for percent air voids in compacted dense and openbituminous paving mixtures

Test method for specific gravity or density of semi-solid andsolid bituminous material by nickel crucible

Test method for penetration of bituminous materials

Method of test for petroleum and its products

Determination of loss on heating of bitumen and flux oil

Solubility of bituminous binders

Penetration of bituminous materials

Determination of softening point of bitumen. Ring and ballmethod

Bitumens for building and civil engineering

Specification for bitumens for roads and other paved areas

Specification for bitumens for industrial purposes

Specification for mixture of bitumen with pitch, tar and Trinidadlake asphalt

Bitumen road emulsions (anionic and cationic)

Specification for bitumen road emulsions

Code of practice for use of bitumen road emulsions

HECHy



AAHK,H,HEC,Hy,MTRC

A,D,Em,I U-IEC,Hy,T,W

A,D,Em,H,HEC\Hy,T,W

AJXEmJiHECHy,T,W

AAEinJ I,HEC,Hy,T,W

HEC,W

AAHK.,H,HEC,Hy,MTRC,W

AAHKJUIKCJIy,MTRC.WV

A,n,IUH-;t\T

A,AAHK,D,Em,H,HEC,H>;MTRC.T,W

AAAHKJXBnUiHEC,Hv,MTRC\T,W

A,AAHKJIHE£;H\\MTRC

TS

TS

TS

TS

TS

TS

TS

TS

PDS

PDS

PDS

PDS

PDS

PSS

- 128-



TYPE

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

Asphalt/Bitumen

Asphalt/Bitumen

Asphalt/Bitumen

Asphalt/Bitumen

Asphalt/Bitumen

Asphalt/Bitumen

Asphalt/Bitumen

Asphalt/Bitumen

Asphalt/Bitumen

BS 5284

BS594

BS 594: Part 2

BS 598: Part 100

BS 598: Part 2

BS 6577

BS 6925

HyDTC 22/97

MS-2

1976i

1992

1985

1987i

1974

1985

1988

1997

1984

Brickwork/ Blockwork ASTM C 55

Brickwork/ Blockwork BS 3056






Cement

Cement

ANSI A 118.4

ANSI A 118.6

1976( 1993) Methods of sampling and testing mastic asphalt used in buildingand civil engineering

Hot rolled asphalt for roads and other paved areas

Specification for the transport, laying and compaction of rolledasphalt

other paved areas - Methods for sampling for analysis

Testing

Specification for mastic asphalt for building (natural rock asphaltaggregates)

Specification for mastic asphalt for building and civilengineering (limestone aggregate)

Procedures for the approval of mix design for bituminousmaterials

The Asphalt Institute Handbook - Mix design method forasphaltic concrete and other hot-mix types

Concrete Brick

Sizes of Refractory Bricks

1985(1995) Specification for clay bricks

1985(1995) Specification for clay bricks

1990 Specification for dimensions of bricks of special shapes and sizes

1985 Specification for clay and calcium cilicate modular bricks

1994 Specification for polyurethane (PUR) foam systems suitable forstabilisation and thermal insulation of cavity walls with masonryor concrete inner and outer leaves

Latex-Portland Cement Mortar

Grout Material Specification

A,AAHK,C,D5Em,H,HEC,Hy,MTRC,T,W

HEQHy

H,HEC,Hy

AAHK

A,C,D,Em,H,Hy,T,W

A,B,D,H,HEC,Hy,T

A,AAHK,B,D,H,HEC,Hy,MTRC,T,W

Hy

A,AAHK,C,D,Em,H,HEC5Hy,T

MTRC

HEC

A,AAHK,HEC,T

A,B,C,D,Em,H,HEC,Hy,T,W

A

A

H,HEC

MTRC

MTRC

TS

PDS

PSS

TS

TS

PDS

PDS

OS

PSS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

- 129-



TYPE

MATERIALS & TESTS Cement
















ASTMC1019

ASTMC1090

ASTMC 150

ASTMC188

ASTM C 206

ASTM C 827

BS 1014

BS 1105

BS 12

BS 146

BS 4027

Sampling and Testing Grout

1993 Test method for measuring changes in height of cylindrical

specimens from hydraulic-cement grout

Specification for Portland Cement

1984 Test method for density of hydraulic cement

Specification for Finishing Hydrated Lime

1987 Test method for change in height at early ages of cylindricalspecimens from cementitious mixtures

1975(1992) Specification for pigments for Portland cement and Portlandcement products

1981(1994) Specification for wood wool cement slabs up to 125mm thick

1989 Specification for Portland cements

1996

1980

BS 4550: Part 0,3, 19784 , 5 & 6

BS 4550: Parti 1978

BS 4550: Part 2 1970

BS 4550: Part 3 " 1978

BS 4550: Section 19783.2

Specification for Portland blastfurnace cements

Specification for sulphate-resisting Portland cement

Methods of testing cement

Method of testing cement - sampling

Method of testing cement - chemical tests

Methods of testing cement - physical tests

Density test

MTRC

H,HEC

MTRC

AAHK,HEC,Hy

MTRC

H,HEC

A,AAHK,B,C\D,Em,H,HEC,Hy,MTRC,T

A,B,D,HEC,T

A,AAHK,B,C,D,Em,H,HEC,HKT,Hy,MTRC,T,W

AAFIK.

A,AAHK,B,C,D,Em,H,HEC,Hy,MTRCT

H,HEC


A,CD,Em,H,HECHy,W

A,AAHK,C,D,Em,H,HEC,Hy,MTRC,'I\W

TS

TS

PDS

TS

PDS

TS

PDS

PDS

PDS

PDS

PDS

TS

TS

TS

TS

TSHv,T,W

- 1 3 0 -



TYPE



















BS 4550: Section3.3

BS 4550: Section3.4

BS 4550: Section3.5

BS 4550: Section3.6

BS 4550: Section3.7

BS 4624

BS6319

BS 6319: Parti

BS 6319: Part 2

BS 6319: Part 3

BS 6319: Part 6

BS 6319: Part 7

BS 6432

BS 6463

BS 6463: Parti

BS 6463: Part 2

BS 6463: Part 4

BS 6699

1978 Fineness test

1978 Strength test

1978 Determination of standard consistence

1978 Test for setting times

1978 Soundness test

1970 Methods of test for asbestos-cement building products

Testing of resin and polymer/cement compositions for use inconstruction

1990 Method for preparation of test specimens

1983 Testing of resin and polymer/cement compositions for use inconstruction - method for measurement of compressive strength

1990 Methods for measurement of modulus of elasticity in flexure andflexural strength

1984 Method for determination of modulus of elasticity incompression

1985 Method for measurement of tensile strength

1984( 1990) Methods for determining properties of glass fibre reinforcedcement material

Quicklime, hydrated lime and natural calcium carbonate

1984 Methods of sampling

1984 Methods of chemical analysis

1987 Methods of test for physical properties of hydrated lime and limeputty

1992 Specification for ground granulated blastfurnace slag for usewith Portland Cement

A,C5D,Em,H,HEC,Hy,T,W





D,Em,H,Hy,T,W

H,MTRC

H,HEC

H,HEC

H,HEC

H,HEC

H,HEC

MTRC

MTRC

MTRC

MTRC

MTRC

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

PDS

TS

TS

TS

TS

Hy,MTRC PDS

- 1 3 1 -



TYPE







MATERIALS & TESTS Concrete













BS890 1972

BS 915: Part 2

BS EN 196-2

BS EN 196-21

BS EN 196-5

BSEN 196-7

AASHTODesignation 227-83

ACI 304

ACI 305

ACI 306

ACI 318

ASTMC 171

ASTM C 494

ASTM C 805

ASTMC 881

ASTM C 939

ASTM C 953

BA

BS 1305

1972(1983)

1995

1992

2995

1992

1979

1987

1987

1974

Specification for building limes

Specification for high alumina cement

Methods of testing cement - Chemical analysis of cement

Methods of testing cement - Determination of the chloride,carbon dioxide and alkali content of cement

Methods of testing cement - Pozzolanicity test for pozzolaniccements

Methods of testing cement - Methods of taking and preparingsamples of cement

Standard method of test for rapid determination of the chloridepermeability of concrete

Guide for Measuring, Mixing, Transporting, and PlacingConcrete

Guide for Placing Concrete in Hot Weather

Guide for Placing Concrete in Cold Weather

Building Code Requirements for Reinforced Concrete

Sheet Materials for Coring Concrete

Chemical Admixtures for Concrete

Test method for rebound number of hardened concrete

Epoxy-Resin-Base Bonding Systems for Concrete

Standard test method for flow of grout for preplaced-aggregateconcrete (Flow Cone Method)

Test method for time of setting of grouts for preplaccd-aggrcgateconcrete in laboratory

Code of practice for the Structural Use of Concrete

Specification of batch type concrete mixers

A,C,Em,H,HEC,Hy,MTRC,T,W

A,HEC

AAHK

AAHK

AAHK

AAHK

Hv

PDS

PDS

TS

TS

TS

TS

TS

MTRC PSS

MTRC

MTRC

MTRC

MTRC

MTRC

A,D,Em,H,HEC,HyXW

MTRC


H,HEC

A,B,D,HEC\T

AJLHECHv

PSS

PSS

PDS

PDS

PDS

TS

PDS

TS

TS

PSS

PDS

-132-



TYPE























BS 1881

BS 1881:

BS1881:

BS1881:

BS1881:

BS1881:

BS1881:

BS 1881:

BS1881:

BS 1881:

BS 1881:

BS 1881:

BS 1881

BS 1881

BS 1881

Part 101

Part 102

Part 103

Part 104

Part 105

: Part 106

: Part 107

: Part 108

: Part 109

: Part 110

: P a r t l l l

: Part 112

: Part 113

: Part 114

1983

1983

1993

1983

1984

1983

1983

1983

1983

1983

1983

1983

1983

1983

BS 1881: Part 115 1986

BS 1881: Part 116 1983

BS 1881: Part 117 1983

BS 1881: Part 118 1983

BS 1881: Part 119 1983

BS 1881: Part 120 1983

BS 1881: Part 121 1983

Testing concrete

Methods of sampling fresh concrete on site

Method for determination of slump

Method for determination of compacting factor

Method for determination of Vebe time

Method for determination of flow

Methods for determination of air content of fresh concrete

Method for determination of density of compacted fresh concrete

Methods of making test cubes from fresh concrete

Method for making test beams from fresh concrete

Method for making test cylinders from fresh concrete

Methods for normal curing of test specimens (20°C method)

Methods of accelerated curing of test cubes

Method for making and curing no-fines test cubes

Methods for determination of density of hardened concrete

Specification for compression testing machines for concrete

Methods for determination of compressive strength of concretecubes

Method for determination of tensile splitting strength

Method for determination of flexural strength

Method for determination of compressive strength using portionsof beam broken in flexure (equivalent cube method)

Method for determination of the compressive strength ofconcrete cores

Method for determination of static modules of elasticity incompression

A,AAHK,C,D,H,HEC,Hy,MTRC,T

H,HEC,HKT

HKT

HKT

HKT

HKT

HKT

HKT

H,HEC,HKT

HKT

HKT

H,HEC,HKT

HEC,HKT

AAHK,HKT

A,AAHK,D,H,HEC,HKT,Hy,T

AAHK,HKT

H,HKT,MTRC

HKT

HKT

A,D,H,HEC,HKT,Hy,T

HKT

HKT

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

- 1 3 3 -



TYPE



















BS 1881: Part 122 1983

BS 1881: Part 124 1988

BS 1881: Part 2 1970

BS 1881: Part 201 1986

BS 1881: Part 202 1986

BS 1881: Part 4

BS 1881: Part 5

BS 1881: Part 6

BS3148

BS4019

BS4251

BS 5075

BS 5075: Part 1

BS 5075: Part 2

BS 5075: Part 3

1970

1970

1971

1980

1974

1982

1982

1985

BS 5328

BS 5328: Part 1

BS 5328: Part 2

1991

1991

Method for determination of water absorption

Methods for analysis of hardened concrete

Methods of testing fresh concrete

Guide to the use of non-destructive methods of test for hardenedconcrete

Recommendations for surface hardness testing by reboundhammer

Methods of testing concrete for strength

Methods of testing hardened concrete for other than strength

Analysis of hardened concrete

Method of test for water for making concrete (including notes onthe suitability of the water)

Rotary core drilling equipment

Specification for truck type concrete mixers

Concrete admixtures

Specification for accelerating admixtures, retarding admixturesand water-reducing admixtures

Specification for air-entraining admixtures

Specification for superplasticizing admixtures

Concrete

Guide to specifying concrete

Method for specifying concrete mixes

A,C,D,Em,H,HEC,HKT,Hy,MTRC,T,W

AAHK,HKT

A,D,H,HEC,Hy,T

AAHK,HKT

AAHKJ1KT

A,D,H,HEC,Hy,T

A,D,H,HEC,Hy,T

A,D,H,HEC,Hy,T

A,B,C,D,Em,H,HEC,HKT,Hy,MTRCXW

A,H,HEC,Hy,W,T

HJIEC

A,AAHK,B,C,D.Em,H,HEC,HvXW

A,AAHK3XVD,Em,H,HEC,Hy,MTRCXW

AJiHEC

A,AAHK,B,C,D,Em,H,HEC,Hv ,MTRCXW

A,AAHR,fiHEC,Hy,W

AJiHEC

A,l LHEC

TS

TS

TS

TS

TS

TS

TS

PSS

TS

TS

PDS

PDS

PDS

PDS

PDS

PDS

PSS

PSS

- 134-



TYPE













BS 5328: Part 3 1990

BS 5328: Part 4 1990

BS 6089 1981

BS 7542 1992

BS 8000: Part 2 1990

Specification for the procedures to be used in producing andtransporting concrete

Specification for the procedures to be used in sampling, testingand assessing compliance of concrete

Guide to assessment of concrete strength in existing structures

Method of test for curing compounds for concrete

Workmanship on building sites - Code of practice for concretework

BS8110

BS 8110: Parti

1985(1997) Structural use of concrete

BS 8110: Part 2 1985

BS 8110: Part 3 1985

CED 1994

CIRIA Report No.91

CS 1 1990

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATF.RTAT.S & TRSTS

Concrete

Finishes/Paints/Coating

Finishes/Paints/Coating

Finishes/Paints/

HKQAA

BS3761

BS381C

BS 4232

1995

1988

1967

Code of practice for design & construction

Code of practice for special circumstances

Design charts for singly reinforced beams, doubly reinforcedbeams and rectangular columns

Model specification for protective coatings for concrete

Early age thermal crack control in concrete

Construction standard - testing concrete

Quality Scheme for the Production and Supply of Concrete

Specification for solvent-based paint remover

Specification for colours for identification, coding and special H,Hypurposes

Specification for surface finish of blast-cleaned steel for painting H,HEC,Hy

A,H,HEC

A,H,HEC

A,AAHK,B,C,D,

Em,H,HEC,Hy,MTRC,T,W

H,HEC

H

A,B,C,D,Em,H,

HEC,Hy,T,W

A,B,C,D,H,HEC,HKT,MTRC,T,W

A,B,C,D,H,T,W,HEC,MTRC

A,C,D,H,HEC,MTRC,T,W

C

AAHK

A,AAHK,B,C,D,Em,H,HEC,HKT,Hy,T,W

AAHK

HEC,Hy

H,Hy

RHEC.Hv

PSS

PSS

TS

TS

PSS

PSS

PSS

PSS

PSS

PDS

PSS

TS

PDS

PDS

OS

PDS

Coating

-135 -



TYPE

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

Finishes/Paints/Coatings
















AAMA 603.8

AAMA 605.2

ASTM A 780

ASTM B 69

ASTM D 1730

ASTM D 2200

BS 1070

BS 1224

BS1615

BS 1706

BS 1872

BS2015

BS217

BS245

BS 2523

BS 2569

1973(1979)

1970(1996)

1987(1994)

1990(1996)

1984(1995)

1965(1985)

1961(1990)

1992

1966(1983)

1988

Voluntary Performance Requirements and Test Procedures for MTRCPigmented Organic Coatings on Extruded Aluminium

Voluntary Specification for High Performance Organic Coatings MTRCon Architectural Aluminium Extrusions and Panels.

Repair of Damaged and Untreated Areas of Hot-Dip Galvanised MTRCCoatings

Specification for Rolled Zinc MTRC

Preparation of Aluminium and Aluminium Alloy Surfaces for MTRCPainting

Pictorial Surface Preparation Standards for Painting SteelSurfaces

Specification for black paint (Tar-based)

MTRC

TS

PDS

PSS

PDS

PSS

PSS

A,AAHK,H,HEC, PDSHy,MTRC

Specification for electroplated coatings of nickel and chromium A,AAHK,D,H, PDSHEC,T

Method for specifying anodic oxidation coatings on aluminium A,AAHK,C,D,Em,H PSSand its alloys ,HEC,Hy,MTRC,T

Method for specifying electroplated coatings of zinc andcadmium on iron and steel

Specification for electroplated coatings of tin

Glossary of paint and related terms

A,AAHK,D,H, PSSHEC,HKT,MTRC,T

AAHK PDS

AAHK,H,HEC,Hy, OSMTRC

Specification for red lead for paints and jointing compounds Hy

Specification for mineral solvents (white spirit and relatedhydrocarbon solvents) for paints and other purposes

Specification for lead-based priming paints

Specification for sprayed metal coatings

HEC

A,C,D,Em,H,HEC,Hy,T

A,AAHK,D,HEC,Hy,MTRC,T,W

PDS

PDS

PDS

PDS

-136-



TYPE

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS
















BS 2569: Part 1

BS3189

BS3416

BS 3698

BS 3900

1964(1988) Protection of iron and steel by aluminium and zinc againstatmospheric corrosion

1991 (1996) Method for specifying phosphate conversion coating for metals

1991 Specification for bitumen-based coatings for cold application,suitable for use in contact with potable water

1964( 1979) Specification for calcium plumbate priming paints

BS 3900: Part Al 1992

BS 3900: Part C2 1994

BS 3900: Part C3 1990

BS 3900: Part C5 1992

BS 3900: Part D5 1995

Methods of test for paints

Sampling

Surface-drying test (ballotini method)

Hard-drying time

Determination of film thickness

Methods of test for paints - Optical tests on paint films -Measurement of specular gloss of non-metallic paint film at 20°,60° and 85°

BS 3900: Part El 1970 Bend test (cylindrical mandrel)

BS 3900: Part E10 1979(1989) Methods of tests for paints - pull-off test for adhesion

BS 3900: Part E2 1992 Scratch test

BS 3900: Part E7 1974(1992) Resistance to impact (falling ball test)

BS 3900: Part F3 1971(1986) Resistance to artificial weathering (enclosed carbon arc)

A,H,HEC,Hy

A,AAHK,D,H,HEC,T

A,AAHK,H,HEC,HKT,Hy

AAHK,H,HEC,Hy,MTRC

C,H,MTRC

H

H

H

H

AAHK

H

C,D,Em,H,HEC,Hy,T,W

H

H

H

PDS

PDS

PDS

PDS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

-137-



MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS













MATERIALS & TESTS Finishes/Paints/Coatings


BS 3900: Part F4 1968(1991) Resistance to continuous salt spray

BS 3900: Part F8

BS 3900: Part H3

BS398I

BS 3987

BS4147

BS4164

BS443

BS 4479

BS 4479: Part 1

BS4641

BS 4652

BS 4756

BS 4800

1993

1983(1989)

1976(1985)

1980(1987)

1987

1982(1990)

1990

1990

Determination of resistance to humid atmospheres containingsulphur dioxide

Methods of test for paints - Evaluation of paint and varnisheffects -Designation of degree of rusting

Specification. Iron oxide pigments for paints

Specification for anodic oxidation coatings on wroughtaluminium for external architectural applications

Specification for bitumen-based hot-applied coating materialsfor protecting iron and steel, including suitable primers whererequired

H

AAHK

AAHK,H,HEC,MTRC

TS

TS

TS

PDS

A,AAHK,C,D,EmsH PDS,HEC,Hy,MTRC,T

AAHK,H,HEC,Hy, PDSMTRC\W

Specification for coal-tar-based hot-applied coating materials for AAHKJIECWprotecting iron and steel, including a suitable primer

PDS

Specification for testing zinc coatings on steel wire and forquality requirements

Design of articles that are to be coated

A,D,H,HEC,Hy, PDSMTRQT

A A R H E C H y X W PSS

Design of articles that are to be coated - generalrecommendations

1986(1996) Method of specifying electroplated coating of chromium forengineering purposes

1971(1995) Specification for metallic zinc-rich priming paint (organicmedia)

1971(1983) Specification for ready mixed aluminium priming paints for

woodwork (general principles)

1989( 1994) Schedule of paint colours for building purposes

HECHy

fiHEC

PSS

PSS

A,AAHK,C»D,Em,H PDS,HEC,Hy,MTRC,T,W

AAHKiiHy PDS

A,AAHK,Em,H, OSHECJ-IKT,MTRC\W

- 138-



TYPE


MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS














BS 4842

BS 4921

BS 5082

BS 5358

BS5411

BS 5466

BS 5493

BS 6044

BS6150

1984( 1991) Specification for liquid organic coatings for application to A,AAHK,D,H,aluminium alloy extrusions, sheet and preformed sections for HEC,Texternal architectural purposes, and for the finish on aluminiumalloy extrusions, sheet and preformed sections coated with liquidorganic coatings

PDS

1988

1993

1993

Specification for sherardized coatings on iron or steel

Specification for water-borne priming paints for woodwork

A,C,D,Em,H,HEC,Hy,MTRC,T

AAHK

Specification for solvent-borne priming paints for woodwork AAHK

Methods of test for metallic and related coatings

Methods of corrosion testing of metallic coatings

1977 Code of practice for protective coating of iron and steelstructures against corrosion

1987( 1995) Specifications for pavement marking paints

BS6100: 1991Subsection 1.3.7

1991

Finishes

Code of practice for painting of buildings

AAHK

AAHK,W

A,C,D9Em,H,HEC,Hy,MTRC,T,W

C,D,Em,H,Hy,T,W

A,D,HEC,T


BS 6161: Part 1 1984(1995) Determination of mass per unit area (surface density) of anodic A,AAHK,D,Em,H,oxidation coatings (gravimetric method) HEC,Hy3T,W

BS 6161: Part 10 1987( 1994) Measurement of mean specific abrasion resistance with an AAHKabrasive jet test apparatus

BS 6161: Part 18 1991(1997) Determination of surface abrasion resistance AAHK

BS 6161: Part 2 1981(1994) Determination of thickness of anodic oxide coatings: non- AAHKdestructive measurement by split-beam microscope

PDS

PDS

PDS

TS

TS

PSS

PDS

OS

PSS

TS

TS

TS

TS

-139-



TYPE

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS.

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS








MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

BS 6161: Part 3

BS 6161: Part 4

BS 6161: Part 7

BS 6161: Part 8

BS 6161: Part 9

BS 6496

BS 6497

1984(1995)

1981(1984)

1984(1995)

1981(1994)

1987(1994)

1984(1991)

1984(1991)








BS 6742

BS 6900

BS 6949

BS729

BS 7664

BS7719

BS 7773

1987(1992)

1991

1971(1994)

Assessment of sealing quality by measurement of the loss of massafter immersion in phosphoric-chromic acid solution

Assessment of sealing quality by measurement of the loss of massafter immersion in acid solution

Accelerated determination of light fastness of coloured anodicoxidation coatings using artificial light

Determination of the fastness to ultraviolet light of colouredanodic oxide coatings

Measurement of wear properties with an abrasive wheel wear testapparatus

Specification for powder organic coatings for application andstoving to aluminium alloy extrusions, sheet and preformedsections for external architectural purposes, and for the finish onaluminium alloy extrusions, sheet and preformed sections coatedwith powder organic coatings

Specification for powder organic coatings for application andstoving to hot-dip galvanised hot-rolled steel sections andpreformed steel sheet for windows and associated externalarchitectural

Electrostatic painting and finishing equipment using flammablematerials

Specification for raw, refined and boiled linseed oils for paintsand varnishes

Specification for bitumen-based coatings for cold application,excluding use in contact with potable water

Specification for hot dip galvanised coatings on iron and steelarticles

Specification for Undercoat and Finishing Paints

Specification for Water-borne Emulsion Paints for Interior Use

Code of Practice for Cleaning and Preparation of Metal Surfaces

A,D,Eni,H,HEC,Hy,T,W

A,D3Em,H,HEC,Hy,T,W

AAHK

AAHK

AAI IK

A,AAHK,D,HEC,MTRCT

TS

TS

TS

PDS

AAHK,H,HEC\MTRC

AAHK

A,H,HEC,Hy

A,AAHK,HEC,Hv,MTRCT

A,C,D,Em,H,HKC,Hy,MTRC,T,W

MTRC

MTRC

AAHK,MTRC

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PSS

- 140-



TYPE

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS Insulating Materials BS 4840: Part 2 1994

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS








Insulating Materials

Insulating Materials

BS 8000: Part 12

BS EN 24624

BS EN ISO 1463

BS EN ISO 2064

BS EN ISO 2360

Institute ofVitreousEnamellers

PDCA

ASTMC612

BS 4840: Part 1

1993

1995

1995

1995

1982

1985

Masonry

Masonry

Masonry

Masonry

Masonry

Masonry

Masonry

Masonry

ASTMC 140

ASTMC144

ASTM C 207

ASTM C 270

ASTM C 404

ASTM C 476

ASTM C 503

ASTMC 615

Code of Practice On... Painting

Paints and varnishes. Pull-off test

Metallic and oxide coatings. Measurement of coating thickness.Microsopical method.

Metallic and other non-organic coatings. Definitions andconventions concerning the measurement of thickness

Non-conductive coatings on non-magnetic basis metals.Measurement of coating thickness. Eddy current method.

Appendix to "Atlas to Enamel Defects" Bond strength obtainedby the coat system

Painting and Decorating Contractors of America; Paint Methods MTRC

MTRC

AAHK

AAHK

AAHK

AAHK

MTRC

PSS

TS

TS

TS

TS

OS

Specification for Slag-Wool Fiber Safmg Insulation

Rigid polyurethane (PUR) foam in slab form - specification forPUR foam for use in transport containers and insulated vehiclebodies

Rigid polyurethane (PUR) foam in slab form - specification forPUR foam for use in transport containers and insulated vehiclebodies

Sampling and Testing Masonry Units

Aggregate for Masonry Mortar

Hydrated Lime for Masonry Purposes

Mortar for Unit Masonry

Aggregates for Masonry Grout

Grout for Masonry

Specification for Marble Dimension Stone

Specification for Granite Dimension Stone

MTRC

D,HEC,T

D,HEC,T

PSS

PDS

PDS

PDS

MTRC

MTRC

MTRC

MTRC

MTRC

MTRC

MTRC

MTRC

TS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

- 1 4 1 -



TYPE

MATERIALS & TESTS Masonry
















MATERIALS & TESTS Mean of Escape

MATERIALS & TESTS Metalwork

ASTM C 780

ASTM C 880

ASTM C 90

ASTM C 97

ASTM E 447,Method B

BS 5390

BS 5628: Part 1

BS 5628: Part 2

BS 5628: Part 3

BS 6073: Part I

BS 6073: Part 2

BS 6100: Part 5

BS 6270: Part 2

BS 6477

BS6515

BS8215

ACI301

ASTM A 153,Class B-2

1989

1990

1976

1981

1981

1992

1984

1991

Preconstruction and Construction Evaluation of Mortars forPlain and Reinforced Unit Masonry

Standard Test Method for Flexural Strength of Natural BuildingStone

Loadbearing Concrete Masonry Units

Test Methods for Absorption and Bulk Specific Gravity ofDimension Stone

Cornpressive Strength of Laboratory constructed MasonryPrisms

Code of practice for stone masonry

Code of Practice for Unreinforced Masonry

Code of Practice for Reinforced and Pre-stressed Masonry

Masonry Materials, Design, and Workmanship

Specification for precast concrete masonry units

Method for specifying precast concrete masonry units

Masonry

Cleaning and Surface Repair of Buildings - Concrete and precastconcrete masonry

Specification for water repellents for masonry surfaces

Specification for polyethylene damp-proof courses for masonry

Code of practice for design and installation of damp-proofcourses in masonry construction

Specifications for Structural Concrete for Buildings

Zinc Coating (Hot Dip) on Iron and Steel Hardware

MTRC

A,D,HEC,T

MTRC

A,D,HEC,T

PSS

TS

PDS

TS

MTRC TS

A,D,HEC,Hy,T,W

A,D,H,HEC,MTRCJ

AAHJIEC,MTRCJ

A,D,H,HEC,MTRCJ

A,H,HEC,MTRC

AJ1ECMTRC

A,D,HEC,Hy,T,W

MTRC

A,HEC,T,W

A

A

MTRC

MTRC

PSS

PSS

PSS

PDS

PDS

PDS

PDS

PSS

PDS

PDS

PSS

PDS

PDS

- 1 4 2 -



TYPE










MATERIALS & TESTS Metaiwork






ASTMA653,G60(ASTM A 653M,Z180)

ASTM C 496

ASTM D 3974

BS 1004

BS 1161

BS1178

BS 1247

Specification for Steel Sheet, Zinc-Coated (Galvanized) orZinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

Standard Test Method for Splitting Tensile Strength

Testing of Materials for Metal Analysis

1972(1985) Specification for zinc alloys for die casting and zinc alloy diecastings

1977(1984) Specification for aluminium alloy sections for structuralpurposes

1982 Specification for milled lead sheet for building purposes

MTRC PDS

BS 1247: Part 1 1990

BS 1247: Part 2 1990

BS

BS

BS

1295

1400

14491.15

Section

1987

1985

1991

BS 1452

BS 1470

BS 1471

1990

1987

1972

Manhole steps

Specification for galvanised ferrous or stainless steel manholesteps

Specification for plastics encapsulated manhole steps

Code of practice for training in arc welding

Specification for copper alloy ingots and copper and copper alloy

castings

Specification for cold rolled narrow strip supplied in arrange of

conditions for heat treatment and general engineering purposes

Specification for flake graphite cast iron

Specification for wrought aluminium and aluminium alloys forgeneral engineering purposes : plate, sheet and strip

Specification for wrought aluminium and aluminium alloys forgeneral engineering purposes - drawn tubes

MTRC

MTRC


A,AAHK,D,H,HEC9Hy,MTRC,T

A,AAHK,D,T5H,HEC

A,B,C,D,H,Hy,

MTRC,T,W

A,C5D,Em,H,HEC,Hy,T

A,C,D,Em,H,HEC,Hy,T5W

A,D,H,HEC,T


H


A,C,D,Em,H5HEC,Hy,T,W

A,AAHK,C,D,Em,H,HEC,Hy5MTRC,T,W

TS

TS

PDS

PDS

PDS

PDS

PDS

PDS

PSS

PDS

PDS

PDS

PDS

PDS

- 143-



TYPE


















BS 1473

BS 1474

BS 1566

BS 1639

BS1719

BS 1724

BS 1769

BS18

BS240

BS2451

BS 2493

BS 2633

BS 2640

BS 2789

BS 2870

BS2871

BS 2871: Part 1

1995

1951

1987

1986

1963

1985

1987

1982

1985

1980

1971

1972 Specification for wrought aluminium and aluminium alloys forgeneral engineering purposes - rivet, bolt and screw stock

1987 Specification for wrought aluminium and aluminium alloys forgeneral engineering purposes: bars, extruded round tubes andsections

1984( 1990) Copper indirect cylinders for domestic purposes

1964( 1997) Methods for bend testing of metals

Classification, coding and marking of covered electrodes formetal-arc welding

Specification for bronze welding by gas

Specification. Unified black hexagon bolts, screws, nuts (UNC &UNF threads). Heavy series

Method for tensile testing of metals (including aerospacematerials)

Method for Brinell hardness test and for verification of Brinellhardness testing machines

1963(1988) Specification for chilled iron shot and grit

Specification for low alloy steel electrodes for manual metal-arcwelding

Specification for class 1 arc welding of ferritic steel pipework forcarrying fluids

Specification for class II oxy-acetylenc welding of carbon steelpipework for carrying fluids

Specification for spheroidal graphite or nodular graphite castiron

Specification for rolled copper and copper alloys: sheet strip andfoil

Specification for copper and copper alloys tubes

Copper tubes for water gas and sanitation

A,AAHK,C,DXn%H,HEC,Hy,MTRC,T,W

A,AAHK,CJXEm,H,HEC,Hy,MTRC,T,W

HEC,W


HEC

HEC

A,Em,HEC,Hy

A,D,Em,H,HEiCI Iy,T

C,D,Em,HEC :,HvTW

HECJIy

HEC

A B C D F m HHECJIy,M!'RC,W

HEC

DJLHf-XMIv,MIRC,T,W

A,AAHK.D,H,

HKcvrMl'RC

AJXI1HECT

PDS

PDS

PDS

TS

OS

PDS

PDS

TS

TS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

- 144-



TYPE

















BS 2871: Part 2 1972

BS 2872

BS 2874

BS2901

BS 2901: Parti

BS 2926

BS 3019: Parti

BS 3083

BS3410

BS 3436

BS3451

BS 3468

BS 3643

BS 3692

BS 3745

1989

1986

1983

1984

1984

1988

1961

Specification for copper and copper alloys. Tubes : Tubes forgeneral purpose

Specification for copper and copper alloys forging stock andforgings

Specification for copper and copper alloy rods and sections(other than forging stock)

Filler rods and wires for gas-shielded arc welding

Ferritic steels

Specification for chromium and chromium-nickel steelelectrodes for manual metal-arc welding

Specification for TIG welding of aluminium, magnesium andtheir alloys

Specification for hot-dip zinc coated and hot-dip aluminium/zinccoated corrugated steel sheets for general purposes

Specification for metal washers for general engineering purposes

Specification for Ingot Zinc

1973(1981) Methods of testing fusion welds in aluminium and aluminiumalloys

1986 Specification for austenitic cast iron

BS 3571: Parti 1985 Specification for MIG welding of aluminium and aluminiumalloys

ISO metric screw threads

1967 Specification for ISO metric precision hexagon bolts, screws andnuts. Metric units

1970(1988) Method for the evaluation of results of accelerated corrosion testson metal

AAHK,HEC

AAHK,W

A,AAHK,D,H,HEC,MTRC,T,W

AAHK,H

H

AAHK


A,D,H,HEC,T

AAHK,HECsHy

Hy,MTRC

A,D,H,HEC,T

A,AAHK,D,H>HEC,Hy,MTRC,T,W

A,AAHK,C,D,H,HEC,Hy,MTRC,T,W

MTRC

A,AAHK,B,C,D,Em,H,HEC,Hy,MTRC,T,W

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

TS

PDS

PDS

PDS

PDS

AAHK TS

-145-



TYPE



















BS 3923

BS 3923: Part 1

BS 3923: Part 2

BS 4074

BS4165

BS 4168: Parti

BS4174

BS4183

1986

1972

1982(1991)

1984

1981

1972

1967

BS4190 1967

BS427

BS 4320

BS 4345

BS 4395

BS 4395: Part 1

BS 4395: Part 2

BS 4439

BS 4464

BS 4570

1990

1968

1968(1986)

1969

1969

1969

1969(1990)

1985

Methods for ultrasonic examination of welds

Methods of manual examination of fusion welds in ferritic steels

Automatic examination of fusion welded butt joints in ferriticsteels

Specification for metal props and struts

Specification for electrode wires and fluxes for the submergedarc welding of carbon steel and medium-tensile steel

Specification for hexagon socket head cap screws

Specification for self-tapping screws and metallic drive screws

Specification for machine screws and machine screw nuts.Metric series

Specification for ISO metric black hexagon bolts, screws andnuts

Method for Vickers hardness test and for verification of Vickershardness testing machines

Specification for metal washers for general engineeringpurposes. Metric series

Specification for slotted angles

Specification for high strength friction grip bolts and associatednuts and washers for structural engineering

General grade

Higher grade bolts and nuts and general grade washers

Specification for screwed studs for general purposes. Metricseries

Specification for spring washers for general engineeringpurposes. Metric series

Specification for fusion welding of steel castings

A,B,H,HEC,Hy

A,B,H,HEC,Hy

A,B,H,HEC,Hy

A

H

AAHK,HEC,Hy,MTRC

A,D,H,I IEC,T

HKT

A,AAHK,B,H,HEC,HKT,Hy,MTRC

A3,C,D,Em,H,HEC,Hy,MTRC,T

A,AAHK,B,C,D,EmJiHECJlKT,Hy,MTRC,T,W

A,AAHK,D,H,HEC,Hy,MTRC\T

A,B,Em,H,HEC,Hy,MTRC

BJLHBQMTRC

B,HEC\MTRC

AAHK

A,AAHKJUI,HECMTRCT

HEC\H\\MTRC

IS

TS

TS

PDS

PDS

PDS

PDS

PDS

PDS

TS

PDS

PDS

PDS

PDS

PDS

POS

PDS

PDS

-146-



TYPE

















BS 4620

BS463

BS464

BS 4677

BS 4868

BS 4870:

BS 4870:

BS 4870:

BS 4870:

BS 4870:

BS4871

BS4871:

BS4871:

BS 4872:

BS 4872:

BS 4933

Parti

Part 2

Part 3

Part 4

Part 4

Parti

Part 2

Parti

Part 2

1970(1988)

1958

1984

1972

1981

1982

1985

1988

1988

1985

1982

1982

1982

1976(1995)

1973

Specification for rivets for general engineering purposes

Specification for sockets for wire ropes

Specification for thimbles for wire ropes

Specification for arc welding of austenitic stainless steelpipework for carrying fluids

Specification for profiled aluminium sheet for building

Specification for approval testing of welding procedures - fusionwelding of steel

Specification for approval testing of welding procedures - TIG orMIG welding of aluminium and its alloys

Specification for approval testing of welding procedures : Arcwelding of tube to tube-plate joints in metallic materials

Specification for approval testing of welding procedures :Specification for automatic fusion welding of metallic materials,including welding operator approval

Specification for automatic fusion welding of metallic materials,including welding operator approval

Specification for approval testing of welders working toapproved welding procedures

Specification for approval testing of welders when weldingprocedure approval is not required - Fusion welding of steel

TIG or MIG welding of aluminium and its alloys

Specification for approval testing of welders when weldingprocedure approval is not required - fusion welding of steel

TIG or MIG welding of aluminium and its alloys

Specification for ISO metric black cup and countersunk headbolts and screws with hexagon nuts

A,AAHK,C,D,Em,H5HEC,Hy,MTRC,T,W

Hy

HKT,Hy

HEC,Hy,MTRC

A,AAHK,D,H,HEC,T

H,HEC,Hy

H,HEC

HEC

HEC

HEQHy

HEC

H,Hy

H,HEC


A,D,H,HEC,T

AAHK,H,HEC,Hy,MTRC

PDS

PDS

PDS

PDS

PDS

TS

TS

TS

TS

PDS

TS

TS

TS

TS

TS

PDS

-147 -



TYPE



















BS 497: Part 1

BS499

BS 499: Part 1

BS 499: Part 2

BS 499: Part 2C

BS5135

BS 5289

BS 6072

BS638

BS639

BS6561

BS6615

BS6681

BS 6722

BS 7084

BS709

BS729

1976

1991

1980

1980

1984

1976(1983)

1981(1986)

1986

1985(1991)

1996

1986

1992

1989

1983

1971(1994)

BS 7352 1990

Specification for manhole covers, road gully gratings and framesfor drainage purposes - cast iron and cast steel

Welding terms and symbols

Glossary for welding, brazing and thermal cutting

Specification for symbols for welding

Welding symbols

Specification for arc welding of carbon and carbon manganesesteels

Code of practice. Visual inspection of fusion welded joints

Method for magnetic particle flaw detection

Arc welding power sources, equipment and accessories

Specification for covered carbon manganese steel electrodes formanual metal arc welding

Specification for zinc alloy sheet & strip for building

Dimensional tolerances for metal and metal alloy castings

Specification for malleable cast iron

Recommendations for dimensions of metallic materials

Specification for carbon and carbon-manganese steel tubularcored welding electrode

Method for destructive testing fusion welded joints and weldmetal in steel

Specification for hot dip galvanised coatings for iron and steelarticles

Specification for strength and durability performance of metalhinges for side hanging applications and dimensionalrequirements for template drilled hinges

A,C,D,MTRC

AAHK,H,HEC,Hy

A,D,HEC,HKT,Hy,T

A,D,H,HEC,Hy,T

A,D,HEC,Hy,T

A,C,D,Em,H,I IEC,Hy,MTRC,T,W

B,H,I IEC,Hy,MTRC

B,H,HEC,Hy,MTRC

II

A,H,HEC

A A H E C T

MTRC

H,HEC,HKT,Hy,MTRC

HEC

H

HECHy

A,(.\D,Km,H,HK(\HKXHy,MTRC\T,W

A,AAHK,DJiHECT

PDS

OS

PSS

OS

OS

PSS

TS

TS

OS

PDS

PDS

PDS

PDS

PSS

PDS

TS

PDS

PBS

- 1 4 8 -



TYPE














MATERIALS 8c TESTS Metalwork







BS 7479

BS 7644

BS 7644: Part 1

BS 7644: Part 2

BS7818

BS8118

BS 8118: Parti

BS8118:Part2

BS 891: Parti

1991

1993

1993

1995

1991

1991

1991

1962

BS EN 10002-1 1990

BSEN3

BSEN

BSEN

BSEN

BSEN

BSEN

BSEN

BSEN

BSEN

BSEN

10003-1 to

1714

22553

287

287-1

287-2

288

288-1

288-2

288-3

1995

1998

1995

1992

1992

1992

1992

1992

Method for salt spray corrosion tests in artificial atmospheres

Direct tension indicators

Specification for compressible washers

Specification for nut face and bolt face washers

Specification for pedestrian restraint systems in metal

The structural use of aluminium

Code of practice for design

Specification for materials, workmanship and protection

Testing of metals

Tensile testing of metallic materials - method of test at ambienttemperature

Method for Brinell hardness test and for verification of Brinellhardness testing machines

Methods for manual examination of fusion welds in ferritic steels

Welded, brazed and soldered joints. Symbolic representation ondrawings.

Approval testing of welders working to approved weldingprocedures

Specification for approval testing of welders working toapproved welding procedures - fusion welding of steel

Approval testing of welders for fusion welding - aluminium andaluminium alloys

Approval of welding procedures for metallic materials

General rules for fusion welding

Welding procedures specification for arc welding

Welding procedure tests for the arc welding of steels

AAHK

MTRC

MTRC

MTRC

A,AAHK,Hy,MTRC

A,D,H,HEC,T

A

A,H

A3,D,Em,H,Hy,T,HEC

A,D,Em,H,HEC,Hy,T

A,D5Em,H,HyJ,W

A,B3C,D,Em5H5Hy,T,W

HKT

A

A,AAHK,D,Em,H,HEC,Hy,T,W

A,D,H,HEC,T

A

A

A

A,AAHK,D,Em,H,HEC,HyJ,W

TS

PDS

PDS

PDS

PSS

PSS

PSS

PSS

TS

TS

TS

TS

OS

TS

TS

TS

PSS

PSS

PSS

TS

- 149-



TYPE


















BS EN 288-4 1992

BS EN 485 Part 2 1995

BS EN 485 Part 3 1994

BS EN 485: Part 1 1994

BS EN 485: Part 4 1994

BS EN 499

BSEN515

1995

1993

BS EN 573: Parti 1995

BS EN 573: Part 2 1995

BS EN 573: Part 3 1995

BS EN 573: Part 4 1995

BS EN 970 1997

BS EN ISO 1479 1994

BS EN ISO 4762 1998

BS EN ISO 7049 1995

CP118 1969

ML/SFA 920

Welding procedure tests for the arc welding of aluminium and itsalloys

Aluminium and Aluminium Alloys, Sheet, Strip and Plate :Mechanical Properties

Aluminium and Aluminium Alloys, Sheet, Strip and Plate :Tolerances on Shape and Dimensions for Hot-Rolled Products

Aluminium and Aluminium Alloys, Sheet, Strip and Plate :Technical Conditions for Inspection and Delivery

Aluminium and Aluminium Alloys, Sheet, Strip and Plate :Tolerances on Shape and Dimensions for Cold-Rolled Products

Welding consumables. Covered electrodes for the manual metalarc welding of non alloy and fine grain steels. Classification

Aluminium and Aluminium Alloys, Wrought Products, TemperDesignations

Aluminium and Aluminium Alloys. Chemical Composition andForm of Wrought Products: Numerical Designation System

Aluminium and Aluminium Alloys. Chemical Composition andForm of Wrought Products : Chemical Symbol BasedDesignation System

Aluminium and Aluminium Alloys. Chemical Composition andForm of Wrought Products : Chemical Composition

Aluminium and Aluminium Alloys. Chemical Composition andForm of Wrought Products : Forms of Products

Non-destructive examination of fusion welds. Visualexamination

Specification for hexagon-head taping screws

Specification for hexagon socket head cap screws

Cross recessed pan head taping screws

The structural use of aluminium

Guide Specifications for Metal Lathing and Furring

A,D,H,HEC\T

HEC

HEC

HEC

HEC

A,H,HEC9Hy,T,W

HEC

HEC

HEC

HEC

HEC

A

AAHK

A

AAHK

AARHECT

MTRC

TS

PDS

PDS

PDS

PDS

OS

PDS

PDS

PDS

PDS

PDS

TS

PDS

PDS

PDS

PSS

PDS

-150-



TYPE

MATERIALS & TESTS Miscellaneous




MATERIALS 8c TESTS Miscellaneous








MATERIALS & TESTS

MATERIALS 8c TESTS

MATERIALS 8c TESTS

MATERIALS 8c TESTS

MATERIALS & TESTS

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous


ASTMD974 1987

BS 1336 1971(1988) Specification for knotting

Test method for neutralisation number by colour-indicatorfiltration

BS 1610 Materials testing machines and force verification equipment

BS 1610: Part 1 1992 Specification for the grading of the forces applied by materialstesting machines when used in the compression mode

BS 1610: Part 2 1985 Specification for the grading of equipment used for theverifications of the forces applied by materials testing machines

BS 1610: Part 3 1990 Specification for the grading of the forces applied by deadweight

and lever creep testing machines

BS 1726 Coil Springs

BS 1902 Methods of testing refractory materials

BS245 1976(1992) White Spirit

BS 2572 1990(1996) Specification for phenolic laminated sheet and epoxy cottonfabric laminated sheet

BS 2648 1955(1993) Performance requirements for electrically - heated laboratorydrying ovens

BS 2G 219 1983 Specification for general requirements for ground support

electrical supplies for aircraft

BS 3837 1996 Expanded polystyrene boards

BS 3964 Specification for Flexible Vulcanised Fibre Sheets

BS 476 Fire tests on building materials and structures

BS 476: Part 11 1982(1988) Method for assessing the heat emission from building materialsBS 476: Part 20 1987 Fire tests on building material and structures - Method of

determination of the fire resistance of element of construction(general principles)

BS 476: Part 21 1987 Fire tests on building material and structures - Method ofdetermination of the fire resistance of load-bearing of element ofconstruction

A,Em,H,HEC,Hy,T,W

A,AAHK,D,H,HEC,Hy,T

H5HEC,Hy,MTRC

B5H,HEC,Hy

H,HEC,Hy

H,HEC,Hy

MTRC

H

A,D,HEC,T

AAHK

B,H5HEC,MTRC

AAHK

EEC

MTRC

AAHK

MTRC

A,AAHK,BAH,HEC,MTRC,T

A,B,D,H,HEC,T

TS

PDS

TS

TS

TS

TS

PDS

TS

PDS

PDS

PDS

TR

PDS

PDS

TS

TS

TS

TS

- 151 -



TYPE








MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous

Miscellaneous



MATERIALS & TESTS PFA



BS 476: Part 22 1987

BS 476: Part 23 1987

BS 476: Part 3 1975

Fire tests on building material and structures - Method ofdetermination of the fire resistance of non-load-bearing ofelement of construction

Method of determination of the contribution of components tothe fire resistance of a structure

External fire exposure roof test

BS 476: Part 4 1970(1984) Non-combustibility test for materials

BS 476: Part 6

BS 476: Part 7

BS 476: Part 8

BS 5080

BS 5080: Part 1

BS 5080: Part 2

BS 6443

BS7361

1989 Method of test for fire propagation for products

1987(1997) Method of test to determine the classification of the surface

1972

1993

1986

1984

1991

BS EN 438: Part 1 1991

BS EN 438: Part 2 1991

BS 3892

BS 3892: Parti 1997

BS 3892: Part 2 1984

spread of flame of products

Test methods and criteria for the fire resistance of elements ofbuilding construction

Structural fixings in concrete and masonry

Method of test for tensile loading

Method of determination of resistance to loading in shear

Method for penetrant flaw detection

Cathodic protection

Decorative high-pressure laminates (HPL) sheets based onthermosetting resins

Decorative high-pressure laminates (HPL) sheets based onthermosetting resins - determination of properties

Pulverised-fuel ash

Specification for pulverised-fuel ash for use with Portlandcement

Specification for pulverised-fuel ash for use in grouts and formiscellaneous uses in concrete

A,B,E),H,HEC,T

A,B,D,H,T

A,AAHK3JIHECJ

A,B,DJiHEC,MTRC/F

AAHK,MTRC

A,AAHKJ3JiHEC,MTRC,T

A,D,H,HEC,T

H

H

H

H,My,MTRC

A,Em,Ep,H,HECMy,T,W

A,D,H,HECVT

A.D.H.HECT

A,BX:,D,Em,liHv,T,W

HECJ-iy.MTRC.T.w

TS

TS

TS

TS

TS

TS

TS

PDS

TS

TS

TS

PSS

PDS

TS

PDS

PDS

PDSIVW

- 152-



TYPE

BS6588 1996

BS 892: Part 2 1996

WBTC 14/94 1995

MATERIALS & TESTS PFA BS 3892: Part 3 1997




MATERIALS & TESTS Pipes & Fittings







AASHTODesignation M252

ANSI/API 1104

ANSI/API 1107

ASTM D 3350

ASTMF714

BS1196

BS 1387

1981

1993

1997

1989

1985(1990)



Hy

BS 143 & 1256 1986

MATERIALS & TESTS Pipes & Fittings BS 1710 1984(1991)

BS 1740: Parti 1971(1990)

MATERIALS & TESTS Pipes & Fittings BS21 1985

MATERIALS & TESTS Pipes & Fittings BS 2494 1990

MATERIALS & TESTS Pipes & Fittings BS 2760 1973

Specification for pulverised-fuel ash for use in cementitious Agrouts

Specification for Portland pulverised fuel ash cement

Specification for pulverized-fiiel ash to be used as type 1 addition

Use of PFA as general fill in reclamation

Standard specification for corrugated polyethylene drainagetubing

Welding of pipelines and related facilities

Pipeline maintenance welding practices

Standard specification for polyethylene plastics pipe and fittingsmaterials

Standard specification for polyethylene (PE) plastic pipe (SDR-PR) based on outside diameter

Specification for clayware field drain pipes and junctions

Specification for screwed and socketed steel tubes and tubularsand for plain end steel tubes suitable for welding or for screwingtoBS21 pipe threads

Specification for malleable cast iron and cast copper alloythreaded pipe fittings

Specification for identification of pipelines and services

Specification for wrought steel pipe fittings (screwed BS 21 R-series thread): metric units

Specification for pipe threads for tubes and fittings wherepressure - tight joints are made on the threads (metricdimensions)

Specification for elastomeric seals for joints in pipework andpipelines

Specification for pitch-impregnated fibre pipes and fittings forbelow and above ground drainage

PDS

A,B,H,HEC,MTRC

HEC

C5Ep


HEC

HEC

Hy

PDS

PDS

PSS

PDS

PSS

PSS

PDS

PDS

A5D,HEC,Hy,T,W

A,C,D?Em,HsHEC,HKT,Hy,MTRC,T,W

A,D,H,HEC,MTRC,T

A,AAHK,Em,H,MTRC


A,C,D,Em,H3HEC,Hy,MTRC,T,W


A,C,D,Em,H,HEC5

Hy,T

PDS

PDS

PDS

PSS

PDS

PDS

PDS

PDS

- 1 5 3 -



TYPE

















BS 2779

BS 2782: Part 10

BS3416

BS 3505

BS 3506

BS 3600

BS3601

BS 3974

BS4147

1986

1991

1986

1986

1987(1993)

1980(1987)

BS416

BS 416: Parti

BS 4346

BS 4346: Part 1

BS 4346: Part 2

BS 4346: Part 3

BS437

1990

1990

1969

1970

1982

1978

Specification for pipe threads for tubes and fittings wherepressure-tight joints are not made on the threads (metricdimensions)

Glass reinforced plastics

Specification for bitumen-based coatings for cold application,suitable for use in contact with potable water

Specification for unplasticized polyvinyl chloride (PVC-U)pressure pipes for cold potable water

Specification for unplasticised PVC pipe for industrial uses

Specification for dimensions and masses per unit length ofwelded and seamless steel pipes and tubes for pressure purposes

Specification for carbon steel pipes and tubes with specifiedroom temperature properties for pressure purposes

Specification for pipe supports

Specification for bitumen-based hot applied coating materials forprotecting iron and steel, including suitable primers whererequired

Discharge and ventilating pipes and fittings, sand-cast or spun incast iron

Specification for spigot and socket systems

Joints and fittings for use with unplasticized PVC pressure pipes



Specification for solvent cement

Specification for cast iron spigot and socket drain pipes andfittings

HKT PDS

HEC,Hy

A,C,D,Em,Hiiv,T

A,C,D,Em,H,Hy,T,W

A,C,D,H,HKT,HEC,Hy,MTRC,T



AAHK

A,B,D,H,HEC,T,W

HECHy,MTRC\W

A,D,H,HEC,T

A,C,D,ErruIiHEC,Hy,MTRC,T,W

A,C,D,Em,H,HECHy,MTRC;i;W

A,C,D,Em,H,HEC\Hy,MTRGT,W

A,C\D,Em,H,HEC,Hy,MTRC,T,W

A,C,D,Em,H,IIEC\Hv,MTRC,T,W

TS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

-154-



TYPE

MATERIALS & TESTS Pipes & Fittings BS 4504


















BS 4504: Part 1

BS 4504: Part 2

BS 4504: Part 3

BS 4504: Section3.1

BS 4504: Section3.2

BS 4504: Section3.3

BS4514

BS4515

BS 4622

1969

1974

1989

1989

1989

1983

1984

1970(1983)

BS 4865 1989

BS 4865: Parti 1989

BS 4865: Part 2 1989

BS 4865: Part 3 1989

BS 4865: Part 4 1989

1989 Circular flanges for pipes, valves and fittings (PN designated)

Ferrous

Copper alloy and composite flanges

Steel, cast iron and copper alloy flanges.

Circular flanges for pipes, valves and fittings (PN designated) -Specification for steel flanges

Specification for cast iron flanges

Specification for copper alloy and composite flanges

Specification for unplasticized PVC soil and ventilating pipes,fittings and accessories

Specification for welding of steel pipelines on land and offshore

Specification for grey iron pipes and fittings

1989 Specification for unplasticized polyvinyl chloride (PVC-U)pipes and plastics fittings of nominal sizes 110 and 160 for belowground gravity drainage and sewerage

1988 Specification for ductile iron pipes and fittings

Dimensions of gaskets for flanges to BS 4504

Specification for non-metallic flat gaskets (including gaskets forflanges to BS 4772)

Specification for spiral wound gaskets for use with steel flanges

Specification for non-metallic envelope gaskets

Specification for corrugated, flat or grooved metallic and filledmetallic gaskets for use with steel flanges

1989 Specification for plastics pipes and fittings for use as subsoilfield drains

A,C,D,H,HEC,MTRC,T5W

A,D,H,HEC,T

A,D,H,HEC,T

MTRC

A,B,C,D,Em,H,HEC,Hy,MTRC,T,W

HEC,MTRC,W

HEC,W

A,D,H,HEC,Hy,MTRC,T,W

HEC,Hy,MTRC

A,B,C,D,Em,H,HEC,Hy,W



A,D,H,HEC,T5W


A,D,H,HEC,T,W

A5DSH,HEC,T,W

A,D,H,HEC,T,W

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

A,H PDS

- 155-



TYPE







MATERIALS <& TESTS Pipes & Fittings









BS 5255 1989

BS 534 1990

BS5911

BS 5911: Parti 1981

BS 5911: Part 100 1988

BS 5911: Part 101 1988

BS 5911: Part 110 1992

BS 5911: Part 114 1992

BS 5911: Part 120 1989

BS 5911: Part 2 1982

BS 5911: Part 200 1994

BS 5911: Part 3 1982

BS 6087

BS 6437

BS65

1990

1984

1988

Specification for thermoplastics waste pipe and fittings

Specification for steel pipes, joints and specials for water andsewage

Precast concrete pipes, fittings and ancillary products

Specification for pipes and fittings with flexible joints andmanholes

Specification for unreinforced and reinforced pipes and fittingswith flexible joints

Specification for glass composite concrete (GCC) pipes andfittings with flexible joints

Specification for ogee pipes and fittings (including perforated)

Specification for concrete porous pipes

Specification for reinforced jacking pipes with flexible joints

Specification for inspection chambers

Specification for unreinforced and reinforced manholes andsoakaways of circular cross section

Specification for pipes and fittings with ogee joints

Specification for flexible joints for grey or ductile cast irondrainpipes and fitting (BS 437) and for discharge and ventilatingpipes and fittings (BS 416)

Specification for polyethylene pipes in metric diameters forgeneral purposes

Specification for vitrified clay pipes, fittings and ducts, alsoflexible mechanical joints for use solely with surface water pipesand fittings

A,C,D,Em,H,Hy,T



A,C,D,Em,H,HEC,Hy,T

A,C,D,Em,H,HEC,Hy,MTRCJ,W

A,D,H,HEC,Hy,T



A,C,D,I I,HEC,Hy,T,W

A,C,D,Em,H,HEC,Hy,MTRC\T,W

A»C,D,Em,H,HEC,Hy,MTRCJ,W

A3,C,D,Em,H,HECHyXW

A,H,HEC,T

A,D,H,HEC,T


PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

- 156-



TYPE

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

Pipes & Fittings

Pipes & Fittings

Pipes & Fittings

Pipes & Fittings

Pipes & Fittings

Pipes & Fittings

Pipes & Fittings

Pipes & Fittings

Pipes & Fittings

Pipes & Fittings

Pipes & Fittings

Pipes & Fittings

Pipes & Fittings

Pipes & Fittings

Pipes & Fittings

Pipes & Fittings

Pipes & Fittings

Plaster/Plasterwork

BS8010

BS879

BS EN 1092-2

BS EN 1514

BS EN 1514-1

BSEN 1514-2

BS EN 1514-3

BSEN 1514-4

BSEN 1561

BS EN 545

DIN 8074

DIN 8075

DW/142

DW/144

DW/151

DW/191

ISO 161

BS4551

1997

1997

1997

1997

1997

1997

1997

1995

1987

1987

1982

1982

1984

1982

1980

Plaster/Plasterwork ANSI A 118.3

Plaster/Plasterwork ASTM C 1063

MATERIALS & TESTS Plaster/Plasterwork ASTM C 28

Code of practice for pipelines

Water well casing

Specification for cast iron flanges

Flanges and their joints. Dimensions of gaskets for PN-designated flanges

Non-metallic flat gaskets with or without inserts

Spiral wound gaskets for use with steel flanges

Non-metallic PTFE envelope gaskets

Specification for non-metallic flat gaskets (including gaskets forflanges to BS 4772)

Specification for flake graphite cast iron

Ductile iron pipes, fittings, accessories and their joints for waterpipelines. Requirements and test methods

High-density polyethylene (PE-HD) pipes; dimensions

High-density polyethylene (PE-HD) pipes; general qualityrequirements-testing

Specification for sheet metal ductwork

Specification for sheet metal ductwork

Specification for plastic ductwork

Code of practice for resin-bonded glass fibre ductwork

Thermoplastics pipes for the transport of fluids - nominal outsidediameters and nominal pressures

Methods of testing mortars, screeds and plasters

Epoxy Resin Mortar Setting Material

Specification for Installation of Lathing and Furring to ReceiveInterior and Exterior Portland Cement-Based Plaster

Specification for Gypsum Plasters

MTRC

A,HEC

W

A,D,H,T,W

A,D,H,T,W

A,D,H5T,W

A,D,H,T,W

A,D,H,T,W

A,C,D,H,T,W

A,C,D,EmsH,Hy,T,W

D,H,HEC,MTRC,T

D,H,HEC,T

AAHK,HEC, MTRC

A,D,Em,H

A,D,Em

A,D,Em,H

D,H,HEC,T

A,AAHK,C5D,Em,H,HEC,Hy,MTRC,T,W

MTRC

MTRC

PSS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

TS

PDS

PDS

PDS

PDS

PDS

PSS

PDS

TS

PDS

PSS

MTRC PDS

-157-



Specification for Inorganic Aggregates for Use in Gypsum MTRCPlaster

Test Methods for Physical Testing of Gypsum, Gypsum Plasters MTRCand Gypsum Concrete

Specification for Installation of Interior Lathing and Furring MTRC

Specification for Application of Interior Gypsum Plaster MTRC

Specification for Metal Lath MTRC

Specification Aggregate for Job-Mixed Portland Cernent-Based MTRCPlaster

Specification for Application of Portland Cement-Based Plaster MTRC

1973(1994) Specification for gypsum building plasters A,B,C,D,Em,H,HECfHy,T,W

MATERIALS & TESTS Plaster/Plasterwork BS 1191: Parti 1973(1994) Excluding premixed lightweight plasters A,AAHK,B,C,D,Em,H,HECHy,MTRCXW

MATERIALS & TESTS Plaster/Plasterwork BS 1191: Part 2 1973(1994) Premixed light weight plasters A,B,C,D,Em,H,HEC,Hy,MTRC,T,W

1985( 1994) Gypsum plasterboard - Specification for plasterboard excluding A,B,D,H,HEC,Tmaterials submitted to secondary operations

1987(1994) Steel lathing for internal plastering and external rendering HECJiy

1994 Specification for expanded metal and ribbed lathing A,AAHK,D,H,HEC,Hy,MTRC,T

1975 Specification for thick PVC sheeting (calendered, flexible, DJ1ECT

unsupported)

1978(1990) Specification for rigid PVC sheet DJIECT

1998 Methods of testing mortars, screeds and plasters - determination A,H,HECof flow

1991 Code of practice for external renderings A,D,H,HEC,T

1989( 1997) Specification for poly vinyl acetate (P VAC) emulsion bonding A,D,HEC,Tagents for indoor use with gypsum building plasters

TYPE

MATERIALS & TESTS Plaster/Plasterwork








ASTM C 35

ASTM C 472

ASTM C 841

ASTM C 842

ASTM C 847

ASTM C 897

ASTM C 926

BS 1191









BS 1230: Part 1

BS 1369

BS 1369: Part 1

BS 2739

BS 3757

BS 4551: Section12

BS 5262

BS 5270: Part 1

PDS

TS

PDS

PSS

PDS

PDS

PSS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

TS

PSS

PDS

- 1 5 8 -



TYPE

MATERIALS & TESTS Plaster/Plasterwork BS 5492 1990 Code of practice for internal plastering

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

Plaster/Plasterwork

Plaster/Plasterwork

Plaster/Plasterwork

Plaster/Plasterwork

Plaster/Plasterwork

Plaster/Plasterwork

Plaster/Plasterwork



MATERIALS & TESTS

MATERIALS & TESTS

Plaster/Plasterwork

Plaster/Plasterwork

MATERIALS & TESTS Plastics


MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

BS 6100: Part 6

BS 6100: Section6.1

BS6100:Subsection 6.6.2

BS6100:Subsection 6.6.2

BS 6452: Part 1

BS 8000: Part 10

BS 8000: Part 8

BS 8000: Part 9

BS 8204: Part 1

BS 8204: Part 2

BS8212

ASTM D 638

BS 1763

Plastics

Plastics

Plastics

BS 2782

BS 2782: Part 1

BS 2782: Part 3

Concrete & plaster

1984(1995) Binders

1990 Glossary of building and civil engineering terms: Plaster

1990 Plaster

1984(1994) Beads for internal plastering and dry lining: specification forgalvanised steel beads

1995 Workmanship on building sites: code of practice for plasteringand rendering

1994 Workmanship on building sites: code of practice for plasterboardpartitions and dry linings

1989 Workmanship on building sites: code of practice for cement/sandfloor screeds and concrete floor toppings

1987 Code of practice for concrete bases and screeds to receive in-situflooring

1987 Code of practice for concrete wearing surfaces

1995 Code of practice for dry lining and partitioning using gypsumplasterboard

1987 Test method for tensile properties of plastics

1975 Specification for thin PVC sheeting (calendered, flexible,

unsupported)

Methods of testing plastics

Methods of testing plastics : thermal properties

Methods of testing plastics : Mechanical properties

A,D,H,HEC,MTRC,T

A3D,HEC,Hy,T,W

D,HEC,T

D,T

D,HEC,T

AAHEQMTRQT

D,HEC,MTRC,T

A,D,HEC,T

D,HEC,MTRC,T

D,H,HEC,MTRCJ

A,D,H,MTRC,T

A,HEC,T

A,D,Em,Ep,H,HEC,

Hy,W

D,HEC,T

HEC,Hy,MTRC

Em

A,C,D9Em,H,HEC,Hy,MTRC,T,W

PSS

PDS

OS

OS

OS

PDS

PSS

PSS

PSS

PSS

PSS

PSS

TS

PDS

TS

TS

TS

- 1 5 9 -



TYPE











MATERIALS & TESTS Prestressing



MATERIALS & TESTS Reinforcement




BS 2782: Part 4 1983

BS 2782: Part 6 1980

Methods of testing plastics : Chemical properties

Methods of testing plastics : Dimensional properties

BS 4154: Part 1 1985(1994) Specification for material and performance requirements

BS 4154: Part 2 1985(1994) Specification for profiles and dimensions

BS 4203 1980( 1994) Extruded rigid PVC corrugated sheeting

Specification for performance requirements

Specification for profiles and dimensions

Guide to the preparation of a scheme to control the quality ofglass reinforced polyester mouldings

Specification for high density polythene sheet for generalpurposes

Laboratory methods of test for determination of smokegeneration characteristics of cellular plastics and cellular rubbermaterials

Specification for the performance of prestressing anchorage forpost-tensioned construction

Specification for hot rolled and hot rolled and processed hightensile alloy steel bars for the prestressing of concrete

Specification for high tensile steel wire and strand for theprestressing of concrete

Specification for Steel Welded Wire Fabric, Plain, for ConcreteReinforcement

Deformed and Plain Billet-Steel Bars for ConcreteReinforcement

Specification for epoxy-coated reinforcing steel bars

Specification for Steel Wire, Plain, for Concrete Reinforcement

BS 4203: Part 1

BS 4203: Part 2

BS 4549: Part 1

BS 4646

BS 5111

BS 4447

BS 4486

BS 5896

ASTMA185

ASTMA615&ASTMA615M

ASTM A 775M

ASTM A 82

1980(1994)

1980(1994)

1970

1970(1982)

1974(1983)

1973(1990)

1980

1980

1991



AAHK

AAHK

A,AAHK,D,H,HEC.T

AAHK

AAHK

HEC,Hy

TS

TS

PDS

PDS

PDS

PDS

PDS

PDS

D,Em,H,HEC,Hy,W PDS

A,D,Em,H

A,C,HEC\H>\MTRC

A,B,C,HEC,Hy,MTRC


MTRC

MTRC

CHECHy/T

MTRC

TS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

-160-



TYPE

MATERIALS & TESTS Reinforcement BS 4449









MATERIALS & TESTS Rock



MATERIALS & TESTS Rock ISRM




BS 7295: Part 1 1990

BS 7295: Part 2 1990

CS 2 1995

ASTMD2845 1990

ASTMD2938 1986

ASTMD3148 1986

1988 Specification for carbon steel bars for the reinforcement ofconcrete

1989 Specification for scheduling, dimensioning, bending and cuttingof steel reinforcement for concrete

1985 Specification for cold reduced steel wire for the reinforcement ofconcrete

1986 Specification for austenitic stainless steel bars for thereinforcement of concrete

1989 Specification for metal arc welding of steel for concretereinforcement

Fusion bonded epoxy coated carbon steel bars for thereinforcement of concrete

Specification for coated bars

Specification for coatings

Construction standard - carbon steel bars for the reinforcement ofconcrete

Determination of Young's modulus and Poisson's ratio bymeasuring the pulse velocities (Method (1))

Test method for unconfined compressive strength of intact rockcore specimens

Standard test method for elastic moduli of intact rock corespecimens in uniaxial compression

1981 Determination of dry density and porosity (using saturation andbuoyancy techniques)

1981 Determination of indirect tensile strength by the Brazil test(method (1))

1981 Determination of schmidt rebound hardness (by schmidt impacthammer)

1981 Determination of slake-durability index

C,D,Em,H,HEC,Hy,MTRC,T,W



H

H5Hy

H9MTRC

C5H,MTRC

H,MTRC


A,C,Em,H,HEC,Hy,T,W

A,C,Em,H,HEC,Hy,T,W

A,C,Em,H,HEC,Hy,T,W

A5C,Em,H,HEC,Hy,T,W

A3C,Em,H,HEC,Hy,T,W

A,C,Em,H,HEC,Hy,T,W

A,C,Em,H,HEC,Hy,T,W

PDS

PSS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

TS

TS

TS

TS

TS

TS

TS

- 1 6 1 -



TYPE








MATERIALS & TESTS Rubber










ISRM

ISRM

ISRM

ISRM

1981

1981

1981

1981

ISRM

ISRM

ISRM

BS 3650

1981

1981

1985

ASTMC 1115

ASTMC1166

ASTM C 542

ASTM C 864

ASTM D 2000

BS1154

BS 1155

BS 2752

BS 3472

1990

1986

1986

1986

1990

1974

1970

Determination of uniaxial compressive strength of core

Determination of water content

Determination of young's modulus in uniaxial compression ofcore

Robertson shear box test

Rock characterisation testing & monitoring

Velocity of sound in rock

Determination of point load strength index by (a) diametral test,(b) axial test, (c) block and irregular

Dense Elastomeric Silicone Rubber Gaskets and Accessories

Flame Propagation of Dense and Cellular Elastomeric Gasketsand Accessories

Lock-Strip Gaskets

Specification for Dense Elastomeric Compression Seal Gaskets,Setting Blocks and Spacers

Classification system for rubber products in automobileapplication

Specification for natural rubber compounds

Specification for natural rubber compounds for extrusion

Specification for chloroprene rubber compounds

Specification for styrene-butadiene rubber (SBR) - non-pigmented, emulsion polymerized, general purpose types (1500series)

Specification for oil-extended styrene-butadiene rubbers (SBR)Non-pigmented, emulsion polymerized general purpose types(1700 series)

A,C9Em,H,HEC,Hy,T,W

A,C,Em,H,HEC,Hy,T,W

A,C,Em9H,HEC,Hy,T,W

A,C,Em,H,HEC,Hy,T,W

A,C,Em,H,HEC,Hy,T,W

A,C,Em,H,HEC,Hy,T,W

A,C,Em,H,HEC,Hy,T,W

MTRC

MTRC

MTRC

A,D,HEC,MTRC,T

TS

TS

TS

TS

TS

TS

TS

PDS

PDS

PDS

PDS

QHEC OS

HEC,Hy

HEC,Hy,MTRC

HEQHy

HEQHy

PDS

PDS

PDS

PDS

HEQHy PDS

-162-



TYPE




















BS 4255: Part 1

BS 4396

BS67I6

BS903

BS 903: Part Al

BS 903: Part A16

BS 903: Part A18

BS 903: Part A19

BS 903: Part A2

BS 903: Part A26

BS 903: Part A3

BS 903: Part A4

BS 903: Part A43

BS 903: Part A5

BS 903: Part A6

BS 903: Part A9

BS 903: Part C2

BS921

BS ISO 5659

1986(1992)

1976

1980(1988)

1987(1995)

1973(1985)

1986(1995)

1989

1969

1982

1990(1995)

1990(1995)

1974

1969

1988(1995)

1982(1995)

1976(1994)

1994

Specification for non-cellular gaskets

Raw material rubber

Guide to Properties and Types of Rubber

Physical testing of rubber

Determination of density

Determination of the effect of liquids

Determination of equilibrium water vapour absorption

Heat resistance and accelerated ageing tests

Determination of tensile stress-strain properties

Determination of hardness

Determination of tear strength (trouser, angle and crescent testpieces)

Determination of compression stress-strain properties

Method for determination of resistance to ozone cracking (staticstrain test)

Determination of tension set

Determination of compression set after constant strain

Determination of abrasion resistance

Determination of volume resistivity

Specification. Rubber mats for electrical purposes

Plastics. Smoke generation

H.MTRC

HECHy

MTRC



A,C,D,Em,RHEC,Hy,MTRC,T,W






C,HEC,Hy,MTRC


C,HEC,Hy,MTRC

A,C,D,Em,H,HEQHy,MTRC,T?W


C,HEC,Hy,MTRC

A,AAHK,D,Em

A,Em

PDS

PDS

PDS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

PDS

PDS

-163-



TYPE







MATERIALS & TESTS Soils














BS ISO 5659-2 1994 Determination of specific optical density

ISO 188 Rubber - Vulcanized - Accelerated ageing or Heat resistance Test

ISO 2230 Vulcanized Rubber - Guide to Storage

ISO 247 Elongation test for rubber

ISO 37 Rubber - Vulcanized - Determination of tensile stress- strainproperties

ISO 7619 Rubber - Determination of indentation hardness by means ofpocket hardness meters

APHA 427 1985 Determination of total sulphide content

Test method for direct shear test of soils under consolidateddrained conditions

ASTM D 854 1983 Test method for specific gravity of soils

BS 1377 Methods of Test for Soils for Civil Engineering Purposes

ASTM D 3080 1972

BS 1377: Parti 1990

BS 1377: Part 2 1990

BS 1377: Part 4 1990

BS 1377: Part 5 1990

BS 1377: Part 6 1990

BS 1377: Part 7 1990

BS 1377: Part 9 1990

CED 1982

GEO

GEO

General requirements and sample preparation

Classification tests

Compaction-related tests

Compressibility, permeability and durability tests

Consolidation and permeability tests in hydraulic cells and withpore pressure measurement

Shear strength tests (total stress)

In-situ tests

CED manual, soil lab. Vol. 2 - Vane shear test

1988 Geoguide 3 - Guide to rock and soil descriptions

1989 Geospec 2 - Large shear box of 300 mm square

A,Em

MTRC

MTRC

MTRC

MTRC

MTRC

A,C,Em,H,HEC,Hy,T,W


QHEC

A,AAHK,C,D,H,HEC,HKT,Hy,MTRC,T,W

H5HEC,HKT

HKT

H,HKT

H,HKT

HKT

H

AAHK,HKT

A,C,D,Em,H,Hy,T,W

A,AAHK,B9C5D5H,HEC,Hy,T,W

C,D,Em,H,HEC,Hy,T

TS

TS

PSS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

OS

OS

-164-

Construction Standards Used in Hong Kong (DeceMber 1998)


TYPE















GEO Report No.36 Test 2.3.2A

GEO Report No.36Test2.3.2B

GEO Report No.36 Test 2.3.2C

GEO Report No.36 Test 2.4.3


GEO Report No.36Test2.9.2A



GEO Report No.36 Test 2.9.4B






1996

1996

1996

1996

1996

1996

1996

1996

1996

1996

1996

1996

1996

1996

Determination of moisture content by over-drying at 105 degreeC+/- 5 degree C

Determination of moisture content by over-drying at 45 degree C+/- 5 degree C

Comparative test for the determination of moisture content byoven-drying

Determination of liquid limit by the cone penetrometer method

Determination of plastic limit, plasticity index and liquidityindex

Determination of particle size distribution by west sieving (withdispersant)

Determination of particle size distribution by west sieving(without dispersant)

Determination of particle size distribution by the pipette method(with dispersant)

Determination of particle size distribution by the pipette method(without dispersant)

Determination of particle size distribution by the hydrometermethod (with dispersant)

Determination of particle size distribution by the hydrometermethod (without dispersant)

Construction of a continuous particle size distribution curvefrom the results of wet-sieving and sedimentation tests

Determination of the total sulphate content of soil and thesulphate content of ground water and of aqueous soil extracts bythe gravimetric method

Determination of the dry density/moisture content relationship ofsoils containing particles which are not susceptible to crushing(using a lOOOcc mould and 2.5kg rammer)

C,D,Em,H,HEC,Hy,T

C,D,Em,H,HEC,Hy,T

C,D,Em,H,HEC,Hy,T

CD,Em,H,HECHy,T

C,D,Em,H,HEC,Hy,T

C,D,Em,H,HEC,Hy,T

C,D,Em,H,HEC,Hy,T

C,D,Ern,H,HEC,Hy,T

C,D,Em,H,HEC,Hy,T

C,DJEm,H,HECs

Hy,T

C,D,Em,H,HEC,Hy,T

C,D,Em,H,HEC,Hy.T

C,D,Em,H,HEC,Hy,T

CJD,Em9H,HEC,HyJ

TS

TS

TS

TS*

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

-165-



TYPE










MATERIALS & TESTS Steel




GEO Report No. 199636Test4.3.3B

GEO Report No. 199636 Test 4.3.4A

GEO Report No. 199636 Test 4.3.4B

GEO Report No. 199636 Test 9.2.1

GEO Report No. 199636 Test 9.2.2

GSCEW 1992

GSCEW 1992

GSCEW 1992

GSCEW 1992

ASTM A 307,Grade A & ASTMF 568, PropertyClass 4.6

ASTM A 366 &ASTM A 366M

ASTM A 53 1997

ASTM A 563 &ASTM A 563M

Determination of the dry density/moisture content relationship of C,D,Em,H,HEC, TSsoils containing particles which are susceptible to crushing Hy,T(using a lOOOcc mould and 2.5kg rammer)

Determination of the dry density/moisture content relationship of C,D,Em,H,HEC, j gsoils containing particles which are not susceptible to crushing Hy,T(using a CBR mould and 2.5kg rammer)

Determination of the dry density/moisture content relationship of C,D,Em,H,HEC, TSsoils containing particles which are susceptible to crushing Hy,T(using a CBR mould and 2.5kg rammer)

Determination of the insitu bulk density and insitu dry density of C,D,Ern,H,HEC, j §soil by the sand replacement method suitable for fine- and Hy,Tmedium-grained soils (with small pouring cylinder)

Determination of the insitu bulk density and insitu dry density of C,D,Em,H,HEC, TSsoil by the sand replacement method suitable for fine-, medium Hy,Tand coarse soils (with large pouring cylinder)

Hilf method of optimum moisture content and maximum dry CSHEC TS

density

Microwave oven drying method C,HEC TS

GEO probe test

Test method for the determination of the in-situ bulk density andthe in-situ dry density of fine grained and medium grained soilsby the nuclear densometer methods

Carbon Steel Bolts and Stud, 60000 psi Strength. Standard MTRCspecification for carbon and alloy steel externally threaded metricfasteners

A,C,D,Em,H,HEC, TSHy,T,W

A,C,D,Em,H,HEC, TSHy,T,W

Steel, Sheet, Cold-Rolled, Commercial Quality MTRC

Standard specification for pipe, steel, black and hot-dipped, Hyzinc-coated, welded and seamless

Carbon and Alloy Steel Nuts MTRC

PDS

PDS

PDS

PDS

- 166-



MTRC

Hy

MTRC

MTRC

MTRC

MTRC

B

HKT,Hy,MTRC

A,D,H,HEC,T

A,C,D,Em,H,HEC,Hy,T

Hy

MTRC

H,HEC,HKT,Hy,MTRC

A,QD,Em,H,HEC,HKT,Hy,MTRC,T,W

HEC

HEC,HKT

HEQHKT

HEC,HKT

TYPE

PDS

TS

PDS

PDS

PDS

PDS

PSS

PDS

PDS

PDS

TS

PDS

PDS

PDS

PDS

PDS

PDS

PDS



















ASTM A 666

ASTM A 673

ASTM F 593

ASTM F 594

ASTM F 738M

ASTM F 836M

BA

BS 1052

1995

1987

1980(1986)

BS 1202: Part 1 1974

BS 1247: Part 3 1991

BS131

BS 1429

BS 1449: Part 1 1991

BS 1449: Part 2 1983

BS 1449: Part 4 1983

BS 1449: Section 19911.1

BS 1449: Section 19911.11

BS 1449: Section 19911.12

Annealed or Cold-worked Austenitic Stainless Steel Sheet Strip,Plate, and Flat Bar

Standard specification for sampling procedure for impact testingof structural steel

Stainless Steel Bolts, Hex Cap Screws, and Studs

Stainless Steel Nuts

Stainless Steel Metric Bolts, Screws, and Studs

Stainless Steel Metric Nuts

Code practice for the structural use of steel

Specification for mild steel wire for general engineeringpurposes

Specification for nails - steel nails

Specification for aluminium manhole steps

Notched bar tests

Specification for annealed round steel wire for general engineeringsprings

Specification for carbon and carbon-manganese plate, sheet andstrip

Specification for stainless and heat-resisting steel plate, sheet andstrip

Specification for stainless and heat-resisting steel plate, sheet andstrip

Steel plates, sheet and strip : Carbon and carbon-manganeseplate, sheet and strip : General specification

Specification for cold rolled narrow strip based on specifiedminimum strength

Specification for tolerances on dimensions and shape for hotrolled narrow strip

-167-



TYPE






















BS1.2

BS1.5

BS1.8

BS1.9

BS2

BS

BS

BS

BS

BS

1449: Section

1449: Section

1449: Section

1449: Section

1501: Part 1&

1564

1723: Parti

1723: Part 2

1723: Part 3

1723: Part 4

BS 2056

BS 2600

1991

1991

1991

1991

1991

1991

1991

1980(1988)

1975(1983)

1986

1986

1988

1988

1991

BS 2600: Parti 1983

BS 2600: Part 2 1973

BS 2633 1987

Specification for tolerances on dimensions and shape for coldrolled narrow strip

Specification for hot rolled narrow strip supplied in a range ofconditions for heat treatment and general engineering purposes

Specification for cold rolled narrow strip supplied in a range ofconditions for heat treatment and general engineering purposes

Specification for hot rolled steel plate, sheet and wide strip basedon formability

Specification for cold rolled wide material based on specifiedminimum strength

Specification for hot rolled narrow strip based on formability

Specification for cold rolled narrow strip based on formability

Steels for pressure purposes: plates

Specification for pressed steel sectional rectangular tanks

Specification for brazing

Guide to brazing

Brazing: methods for non-destructive and destructive testing

Methods for specifying brazing procedures and operatorapproval testing

Specification for stainless steel wire for mechanical springs

Radiographic examination of fusion welded butt joints in steel

Radiographic examination of fusion welded butt joints in steel -Methods for steel 2 mm up to and including 50 mm thick

Methods for steel over 50 mm up to and including 200 mm thick

Specification for class I arc welding of ferritic steel pipework forcarrying fluids

HEC,HKT

HEC,HKT

H,HEC,HKT

HEQHKT

HECHKT

HEQHKT

HEC,HKT

HEQW

AAHK

A,D5H,HEC,T

A,D,HEC,T

A,D,HEC,T

A,D,HEC,T

HKT

A,B,H,HEC,Hy,MTRC

A,B,H,HEC,Hy,MTRQT

A,B,H,HEC,Hy5

MTRC

A,H,HEC,Hy,T

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PSS

TS

PSS

PDS

TS

TS

TS

PDS

-168-



TYPE




















BS 2763

BS 2803

BS29

BS2910

1982(1988)

1976(1987)

1986

BS 2989

BS 2994

1982

BS 3019: Part 2

BS302

BS 302: Part 1

BS 302: Part 2

BS 302: Part 3

BS 302: Part 5

BS 302: Part 6

BS 302: Part 7

BS 302: Part 8

BS3100

BS 3111: Part 2

BS 3382

BS 3382: Parts 1and 2

1960

1987

1987

1987

1987

1987

1989

1989

1979

1961

1961

Specification for round carbon steel wire for wire ropes

Specification for pre-hardened and tempered carbon and low alloyround steel wire for springs for general engineering purposes

Specification for carbon steel forgings above 150mm railingsection

Methods for radiographic examination of fusion weldedcircumferential butt joints in steel pipes

Specification for continuously hot-dip zinc coated and iron-zincalloy coated steel: wide strip, sheet/plate and slit wide strip

1976(1987) Specification for cold rolled steel sections

Austentic stainless steel and heat-resisting steel

Stranded steel wire ropes

Stranded Steel Wire Ropes : Specification for GeneralRequirements

Specification for Ropes for General Purpose

Specification for Zinc Coated Ropes for Ships

Specification for Ropes for Hauling Purpose

Specification for Purpose for Mine Hoisting

Specification for Large Diameter Ropes for General Purpose

Specification for Higher Breaking Load Ropes

Specification for steel castings for general engineering purposes

Steel for cold forged fasteners and similar components - StainlessSteel

Specification for electroplated coatings on threaded components

Cadmium on steel components. Zinc on steel components

Hy

MTRC

AAHFCRHEC,MTRC

HEC,Hy,MTRC

A,D,HEC,Hy,T,W

A,D,H,HEC,MTRC,T

H

A,C9Ern,H,HEC,Hy,MTRC,T,W

HEC

HEC

HEC

HEC

HEC

HEC

HEC


A,D,HEC,MTRC/r

HEC

H,HEC,HKT,Hy,MTRC

PDS

PDS

PDS

TS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PSS

PDS

PDS

PDS

PDS

PDS

PDS

-169-



TYPE
















BS 3600

BS3601

BS3830&BS1344

BS4

BS 4: Part 1

BS405

BS4102

BS4135

BS 4360

BS 4395

1976(1988) Specification for dimensions and masses per unit length ofwelded and seamless steel pipes and tubes for pressure purposes

1987(1993) Steel pipes and tubes for pressure purposes: carbon steel withspecified room temperature properties

Vitreous Enamelled Steel Building Components

BS 3923: Parti 1986

BS 3923: Part 2 1972

Methods for manual examination of fusion welds in ferritic steels

Automatic examination of fusion welded butt joints in ferriticsteels

Structural steel sections

1980(1993) Specification for hot-rolled sections

1987

1990

1984

1986

BS 4395: Part 1 1969

BS 4395: Part 2 1969

BS 449 1969

Specification for uncoated expanded metal carbon steel sheetsfor general purposes

Specification for steel wire and wire products for fences


Specification for weldable structural steel

Specification for high strength friction grip bolts and associatednuts and washers for structural engineering

Specification for high strength friction grip bolts and associatednuts and washers for structural engineering - general grade

Higher grade bolts and nuts and general grade washers

Specification for the use of structural steel in building

MTRC

A,H,HEC,MTRC

MTRC


A,B,C,D,Em,H ,HEC,Hy,MTRC,T,W

H,MTRC

A,C,D,H,HEC,HKT,Hy3MTRC9T,W

A,D,HEC,T

A,H,HEC,Hy,MTRC

HEC

A,B,C,D,Em,H,HEC,HKT,Hy,T

AAHK,MTRC

A,B,C,D3Em,H,HEC,Hy,MTRC,T,W

AAHK,B,HEC

HEC

PDS

PDS

PDS

TS

TS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PSS

-170-



TYPE













BS 449: Part 2 1969

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

Steel

Steel

Steel

BS 4545

BS 4570

BS 4604

1970

1985

BS 4604: Parti 1970

BS 4604: Part 2 1970

BS 4604: Part 3 1973

BS 4848

BS 4848: Part 2 1991

BS5135

Specification for the use of structural steel in building - metricunits

Method of mechanical testing of steel wire

Specification for fusion welding of steel castings

Specification for the use of high strength friction grip bolts instructural steelwork. Metric series

Specification for the use of high strength friction grip bolts instructural steelwork. General grades

Higher grade (parallel shank)

Higher grade (waisted shank)

Hot-rolled structural steel sections

Specification for hot-finished hollow sections

BS 4848: Part 4 1972(1986) Equal and Unequal angles

BS 4848: Part 5 1980

BS 4870: Parti 1981

BS 4871: Parti 1982

BS 4872: Parti 1982

1984

Bulb flats

Specification for approval testing of welding procedures - Fusionwelding of steel

Specification for approval testing of welders when weldingprocedure approval is not required - Fusion welding of steel

Specification for approval testing of welders when weldingprocedure approval is not required - fusion welding of steel



Hy

HEC,Hy,MTRC

A,AAHK,B,HEC,MTRC

A,AAHK,B>QD,Em,H,HEC,Hy,MTRC,T,W

A,AAHK,B,HEC,MTRC

A

C,H,HEC,Hy,MTRC

A,C,D,Ern,H,HEC,

HKT,Hy,MTRC,T,W


C,HEC,Hy,MTRC

H,HEC,Hy

PSS

TS

PDS

PSS

PSS

PSS

PSS

PDS

PDS

PDS

PDS

TS

H,HEC,Hy TS


A,C,D,Ern,H,HEC, P S S

Hy,MTRC,T,W

- 171 -



TYPE

MATERIALS & TESTS Steel BS5216

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

Steel

Steel

Steel

Steel

Steel

Steel

Steel

Steel

Steel

Steel

Steel

Steel

Steel

Steel

Steel

Steel

Steel

Steel

BS 5493

BS5531

BS 5950

BS 5950: Part 1

BS 5950: Part 2

BS 5950: Part 3


BS 5950: Part 4

BS 5950: Part 5

BS 5950: Part 7

BS 5950: Part 8

BS 5950: Part 9

BS 5996

BS6105

BS 6323

BS 6323: Parti

BS 6323: Part 2

BS 6323: Part 3

1977

1988

1990

1990

1990

1982(1994)

1987

1992

1990

1993

1981

1982(1990)

1982(1990)

1982(1990)

1982(1990)

Specification for patented cold drawn steel wire for mechanicalsprings

Protective coating of iron and steel structure against corrosion

Code of practice for safety in erecting structural frames

Structural use of steelwork in building

Code of practice for design in simple and continuousconstruction : hot rolled sections

Specification for materials, fabrication and erection: hot rolledsections

Design in composite construction

Code of practice for design of simple and continuous compositebeams

Code of practice for design of composite slabs with profiled steelsheeting

Code of practice for design of cold formed section

Specification for materials and workmanship: cold formedsections

Code of practice for fire resistant design (for composite slabswith profiled steel sheeting only)

Code of practice for stressed skin design

Specification for acceptance levels for internal imperfections insteel plate, strip and wide flats, based on ultrasonic testing

Specification for corrosion-resistant stainless steel fasteners

Specification for seamless and welded steel tubes for automobile,mechanical and general engineering purposes


Specific requirements for hotfmished welded steel tubes

Specific requirements for hot finished seamless steel tubes

MTRC PDS

A,C,D,H,Hy,T

A,D,H,HEC,T

A,B,D,H,HEC3Hy,T

A,BAH,HEC,Hy,T


A,D,H,HEC,Hy,T

A5D,H,HEC,Hy,T

A,B,D,H,HEC,T

A,D,H,HEC,T

A,H,HEC

A,B,D,H,HECST

H,HEC

H,HEC,Hy,MTRC



A,H,Hy

H

H,HEC,Hy,MTRC

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

TS

PDS

PDS

PSS

PDS

PDS

-172-



TYPE















BS 6323: Part 8 1982(1990)

BS 6362

BS 6363

BS 6405

BS 7079

1990(1995)

1983

1984

BS 7079: Part 0 1990

BS 7079: Part Al 1989(1994)

BS 7079: Part Al 1996Supplement

BS 7079: Part Cl 1989

BS 7079: Part C2 1989

BS 7079: Part C3 1989

BS 7079: Part C4 1989

BS 7079: Part E3 1994(BS EN ISO11124-3: 1997)

BS 7079: Part E4 1994(BS EN ISO11124-4:1997)

Specific requirements for longitudinally welded stainless steeltubes

Specification for stainless steel tubes suitable for screwing inaccordance with BS 21 'Pipe threads for tubes and fittings wherepressure-tight joints are made on the threads'

Specification for welded cold formed steel structural hollowsections

Specification for non-calibrated short link steel chain (grade 30)for general engineering purposes: class 1 and 2

Preparation of steel substrates before application of paints &related products

Preparation of steel substrates before application of paints andrelated products - Introduction

Specification for rust grades and preparation grades of uncoatedsteel substrates and of steel substrates after overall removal ofprevious coatings

Representative photographic examples of the change ofappearance imparted to steel when blast-cleaned with differentabrasives

Specification and definitions for ISO surface profile comparatorsfor the assessment of abrasive blast-cleaned surfaces

Method for the grading of surface profile of abrasive blast-cleaned steel using a comparator

Method for the calibration of surface profile comparators and forthe determination of surface profile using a focusing microscope

Method for the calibration of surface profile comparators and forthe determination of surface profile using a stylus instrument

Metallic blast-cleaning abrasives - High-carbon cast-steel shotand grit

Metallic blast-cleaning abrasives - Low-carbon cast-steel shot AAHK

A,H,HEC,Hy,MTRC

H,HEC,Hy,MTRC

A,H

A,C,D,Em}H,HEC,Hy,T,W

AAHK,H,HEC,Hy

A,AAHK,D,H,HEC,Hy,T

A,AAHK,D,H,HEC,T

A,AAHK,D,H,HEQT

A,D,H,HEC,Hy,T

A,D,H3HEC,Hy

A,DJH,HEC,HyJT

A,D,H,HEC,Hy,T

AAHK

PDS

PDS

PDS

PDS

PSS

PSS

PDS

OS

PDS

TS

TS

TS

PDS

PDS

-173-



TYPE












BS7613

BS 7668

1994

1994

BS970

BS 970: Part 1

BS 970: Part 4

BS 970: Part 5

BS 970: Part 6

BS EN 10025

1987

1972

1973

1993

BS EN 10028

BS EN 10028-4 1995

BS EN 10029 1991

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

Steel

Steel

Steel

Steel

Steel

Steel

BS EN 10048

BS EN 10051

BS EN 10109

BS EN 10113

BS EN 10140

BS EN 10143

1997

1992

1996

1993

1997

1993

Specification for hot rolled quenched and tempered weldablestructural steel plates

Specification for weldable structural steels. Hot finishedstructural hollow sections in weather resistant

Specification for wrought steels for mechanical and alliedengineering purposes

General inspection and testing procedures and specificrequirements for carbon, carbon manganese, alloy and stainlesssteels.

Valve steels

Carbon and alloy spring steels for the manufacture of hot formedsprings

SI metric values (for use with BS 970 : Part 4 & 5)

Hot rolled products of non-alloy structural steel. Technicaldelivery conditions

Specification for flat products made of steels for pressurepurposes

Nickel alloy steels with specified low temperature properties

Specification for tolerances on dimensions, shape and mass forhot rolled steel plates 3mm thick and above

Hot rolled narrow steel strip - tolerances on dimensions andshape

Specification for continuously hot-rolled uncoated plate, sheetand strip of non-alloy and alloy steels. Tolerances on dimensionsand shape

Metallic materials. Hardness test

Hot-rolled products in weldable fine grain structural steels

Cold rolled narrow strip - tolerances on dimensions and shape

Continuously hot-dip metal coated steel sheet and strip.Tolerances on dimensions and shape

A3,D,Em,H,HEC,Hy,MTRC,T,W

A,B,D,Em,H,HEC,Hy,MTRC,T,W

A,B,C,D,H,HEC,T,W

A,B,C,D,Em,H,

HEC,HKT,Hy,MTRC,T,W

A,D,H,HEC,T,W

D,H,HEC5T

D,H,HEC,T

H

PDS

PDS

PDS

TS

PDS

PDS

PDS

PDS

A,W PDS

A

A,D,H,HEC,T,W

HEC

HEC

A

A,BAEm,H,HEC,Hy,T

HEC

AAHJHOECT

PDS

PDS

PDS

PDS

TS

PDS

PDS

PDS

-174-



TYPE














MATERIALS & TESTS SteelMATERIALS & TESTS Steel


BS EN 10147 1992

BS EN 10149-2 1996

BS EN 10149-3 1996

BS EN 10155

BS EN 10163

BS EN 10163:Part 2

BS EN 10163:Part 3

BS EN 10209

1993

1991

1991

1996

BS EN 10210-1 1994

BS EN 10210-2

BS EN 10218-1

BS EN 1561

BS EN 1563

BS EN 1564

BS EN 287-1

BS EN 288-3

1997

1994

1997

1997

1997

1992

1982

Specification for continuously hot-dip zinc coated structural AAHK,Hsteel sheet and strip. Technical delivery conditions

Hot-rolled flat products made of high yield strength steels for HECcold forming - Delivery conditions for thermomechanicallyrolled steels

Hot-rolled flat products made of high yield strength steels for HECcold forming - Delivery conditions for normalized or normalizedrolled steels

Structural steels with improved atmospheric corrosionresistance. Technical delivery conditions

Specification for delivery requirements for surface conditions ofhot rolled steel plates, wide flats and sections

Plates and wide flats

Sections

Cold-rolled low carbon steel flat products for vitreousenamelling - Technical delivery conditions

Hot finished structural hollow sections of non-alloy and finegrain structure steels - technical delivery requirements

Tolerances, dimensions and sectional properties

Steel wine and wine products. General. Test methods

Founding. Grey castirons

Founding. Spheroidal graphite cast iron

Founding. Austempered ductile cast irons

Approval testing of welders for fusion welding - steels

Welding procedure tests for the arc welding of steels A,D,H,T

PDS

PDS

PDS

A,D,H,HEC,T,W

H

H

H

HEC

A,B,D,Em,H,HEC,Hy,T,W

A,HEC


A,C,D,Em,H,Hy,T,W

D,H,T,W

W

A,AAHK,D,Em,H,HEC,Hy,T,W

PDS

PDS

PDS

PDS

PDS

PDS

PDS

TS

PDS

PDS

PDS

TS

TS

- 1 7 5 -



TYPE














BS EN 499

BS EN ISO 8503

BS EN ISO 8503-1

BS EN ISO 8503-2

BS EN ISO 8503-3

BS EN ISO 8503-4

EN 10143

ISO 8501-1

ISO 8503-1

ISO 8504-1

1995

1995

1995

1995

1995

1993

1988

1988

1992

ISO 8504-2 1992

ISO 8504-3 1992

SIS 05 59 00

Welding consumables. Covered electrodes for the manual metalarc welding of non alloy and fine grain steels. Classification

Preparation of steel substrates before application of paints andrelated products. Surface roughness characteristics of blast-cleaned steel substrates

Specification and definitions for ISO surface profile comparatorsfor the assessment of abrasive blast-cleaned surfaces

Method for the grading of surface profile of abrasive blast-cleaned steel. Comparator procedure

Method for the calibration of ISO surface profile comparatorsand for the determination of surface profile. Focusingmicroscope procedure

Method for the calibration of ISO surface profile comparatorsand for the determination of surface profile. Stylus instrumentprocedure

Specification for continuously hot-dip metal coated steel sheetand strip

Representative photographic examples of the change ofappearance imparted to steel when blast-cleaned with differentabrasives - Ed. 1

Abrasive blast- cleaned surfaces

Preparation of steel substrates before application of paints andrelated products - Surface preparation methods : Generalprinciples

Preparation of steel substrates before application of paints andrelated products - Surface preparation methods : Abrasive blast-cleaning

Preparation of steel substrates before application of paints andrelated products - Surface preparation methods : Hand- andpower-tool cleaning

Surface preparation standard for painting steel surfaces

A,D,H,HEC,Hy,T

AAHK

AAHK

AAHK

AAHK

OS

PSS

PDS

TS

TS

AAHK TS

H,Hy

HEC

HEC

HEC

HEQMTRC

PDS

SS

PSS

PSS

PSS

HEC PSS

AAHK,C,HEC,Hy, PDSW

-176-



TYPE

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

Steel

Tiles

Tiles

Tiles

SSPC

BS 1281

BS4131

BS 5385: Part 2

1974

1973

1991

MATERIALS & TESTS Tiles

MATERIALS & TESTS Tiles

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS Timber/Woodworks BS 144: Part 1

MATERIALS & TESTS Timber/Woodworks BS 373

BS 6431: Part 21 1984(1996)

BS 8000: Part 11.1 1989(1995)

Tiles

Timber/Woodworks

Timber/Woodworks

Timber/Woodworks

Timber/Woodworks

Timber/Woodworks

Timber/Woodworks

Timber/Woodworks

Timber/Woodworks

Timber/Woodworks

BS 8000:

BS 1142

BS 1142:

BS1186

BS1186:

BS1186:

BS1186:

BS1210

BS 1282

BS144

Part 11.2

Part 2

Parti

Part 2

Part 3

1990

1989

1971(1989)

1991

1988

1990

1963

1975

1990

1990

Surface preparation standards recommended by paintmanufacturer

Specification for glazed ceramic tiles and the fittings for internalwalls

Specification for terrazzo tiles

Code of practice for external ceramic wall tiling and mosaics(including terra cotta and faience tiles)

Method for determination of moisture expansion using boilingwater. Unglazed tiles

Workmanship on building sites: ceramic tiles, terrazzo tiles andmosaics

Workmanship on building sites: natural stone tiles

Specification for fibre building boards

Medium board and hardboard

Timber for and workmanship in joinery:

Specification for Timber

Specifications for workmanship

Specifications for wood trim and its fixing

Specification for wood screws

Guide to the choice, use and application of wood preservatives

Wood preservation using coal tar creosotes - specification forpreservative

Wood preservation using coal tar creosotes - specification forpreservative

1957(1986) Methods of testing small clear specimens of timber

MATERIALS & TESTS

MATERIALS & TESTS

Timber/Woodworks BS 3962 Methods of tests for finishes for wooden furniture:

Timber/Woodworks BS 3962: Part 1 1980(1992) Assessment of low angle glare

MTRC

C,D,Em,H,HEC,Hy,T

A,D,H,HEC,T

D,H,HEC,T

A,D,H,HEC,Hy,T

A,D,HEC,T

D,HEC,T

A,D,H,HEC,Hy,T

A,D,H,HEC5T

A,D,Hy,T,W

A,D,H,HEC,Hy,T,W

A,D,H,HEC,Hy,T,W

A,D,HEC,Hy,T,W

A,AAHK,D,H,HEC,Hy,T,W

A,D,HEC,Hy,T,W

C,Hy,T

C,HEC,Hy,T


A,D,HEC,T,W

A,D5HEC,T,W

PSS

PDS

PDS

PSS

TS

PSS

PSS

PDS

PDS

PDS

PDS

PSS

PDS

PDS

PSS

PDS

PDS

TS

TS

TS

-177-



TYPE

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

Timber/Woodworks

Timber/Woodworks

Timber/Woodworks

Timber/Woodworks

Timber/Woodworks

Timber/Woodworks

Timber/Woodworks

Timber/Woodworks

BS 3962: Part 2

BS 3962: Part 3

BS 3962: Part 4

BS 3962: Part 5

BS 3962: Part 6

BS 4072

BS4261

BS 4685

1983(1990)

1983(1990)

1980(1992)

1980(1992)

1980(1989)

1987

1971(1983}



MATERIALS & TESTS Timber/Woodworks








BS 5268: Part 3 1985

BS 5268: Part 5 1989

BS 5268: Section 19784.1

BS 5268: Section 19894.2

BS 5268: Section 19886.1

BS 5268: Section 19897.1

BS 5268: Section 19897.2

BS 5268: Section 19897.3

Assessment of surface resistance to wet heat

Assessment of surface resistance to dry heat

Assessment of surface resistance to cold liquids

Assessment of surface resistance to cold oils and fats

Assessment of resistance to mechanical damage

Wood preservation by means of copper/chromium/arseniccompositions

Glossary of terms applicable to timber

Method for the determination of the wax content of waxed paperand board

Structural use of timber

Structural use of timber - code of practice for permissible stressdesign, materials and workmanship

Code of practice for trussed rafter roofs

Code of practice for the preservative treatment of structuraltimber

Recommendation for calculating fire resistance of timbermembers

Recommendation for calculating fire resistance of timber studwalls and joisted floor constructions

Code of practice for timber frame walls - dwelling not exceedingthree storeys

Recommendations for the calculation basis for span tables -domestic floor joists

Joists for flat roofs

Ceiling joists

A,D,HEC,T,W

A,D,HEC,T,W

A,D,HEC,T,W

A,D,HEC,T,W

A,D,HEC,T,W


MTRC

HEC,Hy,W

A,B,C,D,Em,H,HEQHy.T

A,B,C,DJEm,HJ

HEC,Hy,T

A,D,HEC,T

A,D,HEC,T

A,D,HEC,T

A,D,HEC5T

A,D,HEC,T

A,D,HEC,T

A,D,HEC5T

A,D,HEC,T

TS

TS

TS

TS

TS

PSS

OS

TS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PDS

PDS

-178-



TYPE









MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

MATERIALS & TESTS

Timber/Woodworks

Timber/Woodworks

Timber/Woodworks

Timber/Woodworks

Timber/Woodworks

Timber/Woodworks

Timber/Woodworks

BS 5268: Section7.4

BS 5268: Section7.5

BS 5268: Section7.6

BS 5268: Section7.7

BS544

BS 5442: Part 3

BS 5450

BS 5589

BS 5666

BS 5666: Part 2

BS 5669

BS 5669: Part 1

BS 5669: Part 2

BS 5707

BS 5707: Part 1

MATERIALS & TESTS. Timber/Woodworks BS 5707: Part 2





1989 Ceiling binders

1990 Domestic rafters

1990 Purlins supporting rafters

1990 Purlins supporting sheeting or decking

1969(1994) Specification for linseed oil putty for use in wooden frames

1979(1990) Adhesives for use with wood

1977(1984) Specification for sizes of hardwoods and method of measurement

1989( 1997) Code of practice for preservation of timber

Methods of analysis of wood preservatives and treated timber

1980 Qualitative analysis

Particle board

1989 Methods of sampling, conditioning and test

1989 Specification for wood chipboard

Solutions of wood preservatives in organic solvent

1979 Specifications for solutions for general purpose applications,including timber that is to be painted

1979( 1993) Specification for pentachlorophenol wood preservative solutionfor use on timber that is not to be painted

1980(1990) Methods of treatment

Specification for tropical hardwoods graded for structural use

1985(1992) Guide. General introductory document on European (or CEN)methods of tests for wood preservatives

1985(1991) Plywood

A,D,HEC,T

A,D,HEC,T

A,D,HEC,T

A,D,HEC,T

A,AAHK,D,HEC,T

A,D,HEC,Hy,T,W

A,D5HEC,Hy,T,W

A,C,D,Em,HEC,Hy,T,W

A,D,HEC,HysT,W

A,D,HEC,Hy,T,W

A,D,H,HEC,T

A,HEC

A,HEC

A,D,HEC,T,W

A,D,HEC,T,W

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PSS

OS

OS

PDS

TS

PDS

PDS

PDS

A,HEC,T PDS

A9D,HEC,T,W

C,A,D,Em9H,HEC,Hy,T,W

A,D,HEC,T,W

A,D,Em,H,HEC,Hy,MTRC,T

PSS

PDS

TS

PDS

- 1 7 9 -



TYPE

MATERIALS & TESTS Timber/Woodworks BS EN 942

MATERIALS & TESTS Timber/Woodworks WBTC 32/92

MATERIALS & TESTS Water











MATERIALS & TESTS Waterproofing



AOAC Test920.194

APHA 2540C

APHA 2540D

ASTMD1125 1982

ASTMD1293 1978

ASTMD3561 1977

ASTMD4327 1984

ASTMD511

ASTMD512

ASTMD516

BS3148

BS 1521

BS3012

1984

1988

1980

1980

1972

1970

1996 Timber in joinery. General classification of timber quality

1992 The use of tropical hardwood in construction sites

1990 Determination of carbonates and bicarbonate contents

1985 Determination of inorganic impurities

1992 Total suspended solids

Test methods for electrical conductivity and resistivity of water

Test methods for pH of water

Test method for lithium, potassium and sodium ions in brackishwater, sea water and brines by atomic absorptionspectrophotometry

Test method for anions in water by ions chromatography

Test methods for calcium and magnesium in water

Test methods for chloride ion in water

Test methods for sulphate ion in water

Methods of test for water for making concrete (including noteson the suitability of the water)

1972( 1994) Specification for waterproof building papers

1970(1982) Specification for low and intermediate density polythene sheetfor general purposes

BS743 1970 Specification for materials for damp-proof courses

A

A,C,D,H,HEC,Hy,T,W

A,D,Em,H,HEC,Hy,T

A,Em5Ep,H,HEC,Hy,T

A9Em,Ep,H,HEC9

Hy,T

A,Em,Ep9H,HEC,Hy,T,W

A,Em,Ep,H,HEC,Hy,T,W

A,Em,Ep9H9HEC,Hy,T,W

A,Em9Ep,H,HEC9

Hy,T,W

A,Em,Ep,H,HEC,Hy,T,W

A,Em,Ep,H,HEC,Hy,T9W

A,Em,Ep,H,HEC,Hy,T3W

A,B,C,Em,H9HEC,Hy,T,W

A,H,HEC,Hy,T

D9Em,Ep,H,HEC,Hy,W

A,C,D,Em,H9HEC,Hy,MTRC,T9W

PDS

PSS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

TS

PDS

PDS

PDS

-180-



TYPE




MATERIALS & TESTS Woodwork &Metalwork

MISCELLANEOUS General









MISCELLANEOUS Measurement

MISCELLANEOUS Measurement

BS 8000: Part 4

BS8102

CP102

BS 1494: Part 2

BS 2846

BS 2846: Part 3

BS 2846: Part 4

BS381C

BS 4778: Part 3

BS 6100: Part 1

BS 6739

GSCEW

WB

BS718

BS 7307: Part 1

1989 Workmanship on building sites: code of practice for waterproofing

1990 Code of practice for protection of structures against water fromthe ground

1973 Code of Practice for Protection of Buildings against Water fromthe Ground

1967 Specification for accessories for building purposes: sundryfixings

Guide to statistical interpretation of data

1975( 1985) Guide to statistical interpretation of data - determination of astatistical tolerance interval

1976( 1985) Techniques of estimation and tests relating to means andvariances

1996 Specification for colours for identification, coding and specialpurposes

Quality vocabulary - Availability, reliability and maintainabilityterms

Glossary of building and civil engineering terms: general andmiscellaneous

1986 Code of practice for instrumentation in process control systems:installation, design and practice

1992 General specification for civil engineering works

1997 An English-Chinese glossary of terms commonly used in theHong Kong construction industry

1979(1985) Specification for density hydrometers

1990

MISCELLANEOUS Measurement BS 7307: Part 2 1990

Building tolerances. Measurement of buildings and buildingproducts - methods and instruments

Building tolerances. Measurement of buildings and buildingproducts - position of measurement points

A,B,D,HEC,T

A,B,D,H,HEC,MTRQT

A,Ep,H,HEC

H,HEC,Hy

Hy

HEC,Hy,MTRC

HEC,Hy,MTRC

A,AAHK,Em,EpsH,HKT,HEC,Hy,MTRC

A,Em

D,H,HEC,T

AAHK

C,D,HEC,Hy,T,W

H,HEC,Hy

A,D,HEC,T

A,D,HEC,T

PSS

PSS

PSS

PDS

OS

OS

OS

OS

OS

OS

PSS

OS

OS

PDS

OS

OS

- 1 8 1 -



TYPE

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

Measurement

Measurement

Measurement

Measurement

Quality

Quality

Quality

Quality

Quality

Quality

Quality

Quality

Quality

Quality

Quality

Quality

Quality

DIN 7168

SMMBW

SMMCEW

WB

BS 5750

BS 5750: Part 0

BS 5750: Part 1

BS 5750: Part 2

BS 5750: Part 3

BS 5750: Part 4

BS 5750: Part 8

BS 5760

BS6001

BS 9000: Part 2

BS CECC 00800

BS EN ISO 9000-1

BS EN ISO 9000-2

1979

1992

1993

1987

1987

1987

1987

1987

1987

1996

1988

1997

1997

General tolerances for linear and angular dimensions and HECgeometrical tolerances

The Hong Kong standard method of measurement of buildingworks. Third edition

Standard method of measurement for civil engineering works

Standard phraseology of (bills of quantity) item descriptions

Quality systems

Principal concepts and applications

Specification for design/development, production, installationand servicing

Specification for production and installation

Specification for final inspection and test

Guide to use of BS 5750: Parts 1, 2 & 3

Guide to quality management and quality systems elements forservices

Reliability of systems, equipment and components

Sampling procedures for inspection by attributes

General requirements for a system for electronic components ofassessed quality - Specification for national implementation ofthe CECC system

Harmonised system of quality assessment for electronic AAHKcomponents. Code of practice on the use of the PPM approach inassociation with the CECC system

Quality management and quality assurance standards - H,HECGuidelines for selection and use

Generic guidelines for the application of ISO 9001, ISO 9002 Hand ISO 9003

OS

A,Ep,HEC,T,

A,C,D,Ep,HEC,Hy,T,W

C,D,HEC,Hy,T,W

H

H

H

H

H

H

H

A,Eni

AAHK

AAHK

OS

OS

OS

SS

SS

SS

SS

SS

SS

SS

SS

SS

SS

SS

SS

SS

-182-



TYPE

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

Quality

Quality

Quality

Quality

Quality

Quality

Quality

Quality

Quality

Quality

Quality

Quality

Quality

Standard Drawings

Standard Drawings

Standard Drawings

Standard Drawings

BS EN ISO 9000-3

BS EN ISO 9001

BS EN ISO 9002

BS EN ISO 9003

BS EN ISO 9004-1

BS ISO 9000-2

HKQAA

ISO 10011-1

ISO 10011-2

ISO 10011-3

ISO 10012-1

ISO 10013

ISO 8402

ASD

ASD

ASD

CED

1997

1994

1994

1994

1994

1997

1990

1991

1991

1992

1995

1994

Quality Management and Quality Assurance Standards Part 3:Guidelines for the Application of ISO 9001: 1994 to theDevelopment, Supply, Installation and Maintenance ofComputer Software

Quality systems. Model for quality assurance in design,development, production, installation and servicing

Quality systems. Model for quality assurance in production,installation and servicing

Quality system. Model for quality assurance in final inspectionand test

Quality Management and Quality System Elements Part 1:Guidelines

Quality Management and Quality Assurance Standards Part 2:Generic Guidelines for the Application of ISO 9001, ISO 9002and ISO 9003 (BS ISO)

Quality Scheme for the Production and Supply of Concrete

Guidelines for auditing quality system : Auditing

Guidelines for auditing quality system : Qualification criteria forquality systems auditors

Guidelines for auditing quality system : Management of auditprogrammes

Quality assurance requirements for measuring equipment:Metrological confirmation system for measuring equipment

Guidelines for developing quality manuals

Quality management and quality assurance - vocabulary

Project signboard and hoarding details

Architectural office standard drawings

Standard detail drawings (Architectural and structural)

CED standard drawings

HEC

HEC

HEC

ss

H,HEC

H,HEC

H,HEC

HEC

HEC

AAHK

HEC

HEC

SS

SS

SS

SS

SS

PDS

SS

SS

SS

SS

HEC

HEC

A,Ep,HEC

A,Em,Ep,HEC

A,Em,Ep

A,C,Ep,HEC,Hy,T,W

SS

SS

OS

OS

OS

OS

- 183-



TYPE

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

MISCELLANEOUS

RAILWAYS

RAILWAYS

RAILWAYS

RAILWAYS

RAILWAYS

RAILWAYS

RAILWAYS

RAILWAYS

RAILWAYS

RAILWAYS

RAILWAYS

RAILWAYS

RAILWAYS

RAILWAYS

Standard Drawings

Standard Drawings

Standard Drawings

Standard Drawings

Standards Drawings

Standards Drawings

Rails

Rails

Rails

Rails

Rails

Rails

Rails

Rails

Rails

Rails

Rails

Rails

Rails

Rails

DSD

HD

HyD

WSD

BS4210

CED 1994

UIC Code 860

AS 010 & AS Oil

BR552

BR Civil Eng HandBook 11

BR Civil Eng HandBook 32

BS11 1985

BS47 1991

BS 6100 Section2.4.2

BS64 1992

DIN 17223

Pandrol Spec A-AIssue 01

Pandrol Spec B-HIssue 04

Pandrol Spec C-BIssue 02

Pandrol Spec E-CIssue 02

DSD standard drawings

HD standard drawings

HyD standard drawings

WSD standard drawings vol. I to III

Specification for 35mm microcopying of technical drawings

Hong Kong Government Engineering survey offices 1:200 and1:500 survey and drafting specifications

Technical Specification for the Supply of Rails

Australian Standard Grading rules for Jarrah, Karri and Wandoo

Manufacture and Testing of Alumino Thermic Welds

Continuous Welded Rail Installation

Procedures/ Recommendation for Alumino Thermic Welds

Specification for Railway Rails

Steel fishplates for bullhead and flat bottom Railway Rail

British Standard Glossary of Building and Civil EngineeringTerms - Railway Engineering

Steel fish bolts and nuts for Railway Rails

Technical Requirements for Helical Springs

Pandrol Brand 'e1 Series Rail Clip Specification and Tests

Pandrol Brand High Viscosity Nylon 66 Insulators

Pandrol Brand Cast Shoulders

Pandrol Brand Cast Support Baseplate

A,C,D,Ep,HEC,Hy>T

H

A,C,D,Em,Ep,Hy,T,W

A,Ep,HEC,HysW

Hy

C,D,H,Hy,W

MTRC

MTRC

MTRC

MTRC

OS

OS

OS

OS

OS

OS

PDS

PDS

TS

PSS

MTRC PSS

MTRC

MTRC

MTRC

MTRC

MTRC

MTRC

MTRC

MTRC

MTRC

PDS

PDS

OS

PDS

PDS

TS

PDS

PDS

PDS

-184-



TYPE

RAILWAYS

RAILWAYS

RAILWAYS

RAILWAYS

RAILWAYS

RAILWAYS

RAILWAYS

RAILWAYS

RAILWAYS

RAILWAYS

RAILWAYS

RAILWAYS

RAILWAYS

RAILWAYS

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

Rails

Rails

Rails

Rails

Rails

Rails

Rails

Rails

Rails

Rails

Rails

Rails

Rails

Rails

General

General

General

General

General

General

General

Pandrol Spec G-CIssue 01

Pandrol Spec D-DIssue 02

Pandrol Spec DC-A Issue 03

UIC Code 861-2

UIC Code 861-3

UIC Code 864-1

UIC Code 864-2

UIC Code 864-3

UIC Code 864-4

UIC Code 864-5

UIC Code 864-8

UIC Code 866

UK DOT

UK DOT

ANSI 16.1

ANSIZ87.1

ANSI/ISEA 109

BS 1542

BS 2092

BS 3456

BS 3864

1993

1967

1986

1990

1982

1982

1989

Pandrol Brand Maranyl A151 Bushes Specification and Tests MTRC

Pandrol Brand High Temperature EVA MTRC

Pandrol Brand Special Performance Resilient Rubber Rail Pad MTRC

Standard Profiles for Point Rails adapted to the UIC 54 kg/m and MTRC60 kg/m Rail Profile

Standard 60 kg/m Rail Profiles. Types : UIC 60 and 60E

Technical Specification for the Supply of Sleeper Screws

Technical Specification for the Supply of Steel Track Bolts

Technical Specification for the supply of spring steel washers foruse in Permanent Way

Technical Specification for the Supply of Fishplates or Sections for MTRCFishplates made of Rolled Steel

Technical Specification for the Supply of Rail Seat Pads

Rolled Profiles for Fishplates for 54 kg/m and 60 kg/m Rails

Technical specification for the supply of cast manganese steelcrossings for switch and crossing work

Railway construction and operation requirements

User requirements for X-ray screening equipment

Recording and measuring of work injury experiences

Eye and face protection

Gas detector tubes

Eye & face protection for welding

Eye-protectors for industrial and non-industrial users

Specification for safety of household and similar electricalequipment

Fire fighter helmets HEC

TS

PDS

PDS

PDS

MTRC

MTRC

MTRC

MTRC

PDS

PDS

PDS

PDS

PDS

MTRC

MTRC

MTRC

AAHK

AAHK

HEC

HEC

HEC

HEC

HEC

A,D,Em,H

PDS

PDS

PDS

PSS

PSS

OS

OS

PDS

PSS

PDS

PDS

PDS

- 1 8 5 -


GROUP

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SUBGROUP

General

General

General

General

General

General

General

General

General

General

General

General

General

General

General

General

General

General

General

General

General

General

General

NUMBER

BS 5304

BS 5378

BS5531

BS 6249

BS EN 292

BS EN 354

BS EN 397

EMSD

EMSD

EN 1496

EN 341

EN 345

EN 355

EN 358

EN 361

HEC

HEC

IEC 1243

IEEE 510

JISK0804

JIST8165

LabourDepartment

LabourDepartment

YEAR

1988

1988

1993

1995

1997

1997

1983

1985

1979

TITLE

Code of practice for safety of machinery

Safety signs and colours


Fire fighter protective jacket

Safety of machinery. Basic concepts, general principles fordesign.

Rubber boots

Industrial Safety Helmets

Code of practice for the electricity (wiring) regulations

Guidance notes for the electrical products (safety) regulation

Rescue system

Rescue system

Safety Shoes

Sock absorber for fall protection

Rescue harness

Safety harness

HEC Safety Rules

HEC Corporate H&S Manual

HV tester

Safety in HV & High power testing

Detector tubes

Safety belts for line-men

Code of practice for site safety supervision on building worksand street works

List of hearing protectors

USERORGANISATION

A,AAHK,Em,Ep,MTRC

AAHK

A,D,H,HEC,T

HEC

AAHK

HEC

HEC

A

A

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

HEC

A

HEC

TYPE

PSS

OS

PSS

PDS

OS

PDS

PDS

PSS

PSS

PDS

PDS

PDS

PDS

PDS

PDS

OS

OS

PDS

PSS

PDS

PDS

PSS

OS

-186-



TYPE

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY .

General

General

General

General

General

General

General

General

General

General

General

General

General

General

Ordinance/ Regulation




LabourDepartment

LabourDepartment

LabourDepartment

LabourDepartment

LabourDepartment

LabourDepartment

LabourDepartment

LabourDepartment

LabourDepartment

LabourDepartment

OSHA 1910.134

WB

WB

WSD

CAP 22

CAP 295

CAP 295

CAP 295

1994

1994

1998

1990

1990

1995

1998

1998

1993

1995

1990

List of breathing apparatus

Code of practice for fossil-fuel boilers

Guide to safety regulations on lifting appliances and lifting gear,1994

Code of practice for safe use of mobile cranes and tower cranes

A guide to the Construction Sites (Safety) Regulations

A guide to the Factories and Industrial Undertakings (ConfinedSpaces) Regulations

Guide to the Factories and Industrial Undertakings (SafetyOfficers and Safety Supervisors) Regulations

Code of practice for scaffolding safety

Code of practice - Safety and health at work for industrial diving

Code of practice - Safety and health at work with asbestos

Dust/Mist Respirator

Construction site security

Construction site safety manual

WSD safety manual

Fatal Accidents Ordinance

Dangerous Goods (General) Regulations

Dangerous Goods (Government Explosive Depots) Regulations

Dangerous Goods Ordinance

HEC

HEC

A

A


A,B,C,DsEm,H,HEC,HyJ,W

A,B,C,D9Em,H,HEC,Hy,T,W

A

A

A

HEC


A,C,D,Em,HEC,Hy,T,W

A,HEC,W

OS

PSS

OS

PSS

OS

OS

OS

PSS

PSS

PSS

PDS

PSS

PSS

PSS

TR

TR

TR

TR

-187-



TYPE

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY



















CAP 398

CAP 406

CAP 456

CAP 470

CAP 509

CAP 56

CAP 56

CAP 59

CAP 59

CAP 59

CAP 59

CAP 59

CAP 59

CAP 59

CAP 59

CAP 59

CAP 59

CAP 59

Occupational Safety and Heath Council Ordinance

Electrical Products (Safety) Regulation

Consumer Goods Safety Ordinance

Builders' Lifts and Tower Working Platforms (Safety)Ordinance

Occupational Safety and Health Ordinance & its SubsidiaryLegislation

Boilers and Pressure Vessels Ordinance & its SubsidiaryLegislation

Boiler and Pressure Receivers Ordinance

Construction Sites (Safety) Regulations

Factories and Industrial Undertakings (Abrasive Wheels)Regulations

Factories and Industrial Undertakings (Asbestos) SpecialRegulations

Factories and Industrial Undertakings (Cartridge-OperatedFixing Tools) Regulations

Factories and Industrial Undertakings (Confined Spaces)Regulations

Factories and Industrial Undertakings (Dangerous Substances)Regulations

Factories and Industrial Undertakings (Electricity) Regulations

Factories and Industrial Undertakings (Fire Precautions inNoticeable Workplaces) Regulations

Factories and Industrial Undertakings (Lifting appliances andLifting Gear) Regulations

Factories and Industrial Undertakings (Noise at Works)Regulations

Factories and Industrial Undertakings (Protection of Eyes)Regulations

TR

TR

TR

TR

TR

TR

TR

TR

TR

TR

TR

TR

TR

TR

TR

TR

TR

TR

-188-



TYPE

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

SAFETY

Ordinance/ Regulation CAP 59







SAFETY

SAFETY

SITE CLEARANCE

SITE CLEARANCE

SITE CLEARANCE

SITE CLEARANCE

SITE CLEARANCE

SITE CLEARANCE

SITE CLEARANCE

SITE CLEARANCE


Ordinance/Regulations

Asbestos Removal

Asbestos Removal

Asbestos Removal

Asbestos Removal

Asbestos Removal

Asbestos Removal

Asbestos Removal

Asbestos Removal

CAP 95

CAP 59

CAP 311

CAP 311

CAP 354 Section35

CAP 59

EPD

EPD

EPD

EPD

1997

1997

1997

1997

Factories and Industrial Undertakings (Spraying of FlammableLiquids) Regulations

Factories and Industrial Undertakings (WoodworkingMachinery) Regulations

Factories and Industrial Undertakings Ordinance

Quarries (Safety) Regulations

Factories and Industrial Undertakings (Safety Officers andSafety Supervisors) Regulations

Factories and Industrial Undertakings (Guarding and Operationof Machinery) Regulations

Factories and Industrial Undertakings (First Aid in NoticeableWorkplaces) Regulations

Fire Services Ordinance

Factories and Industrial Undertakings Regulations

Air pollution Control (Asbestos) (Administration) Regulation

Exempted Classes of Asbestos Work Under Sections 69(3) and75(5) of the Air Pollution Control Ordinance

Code of Practice On Handling, Transport and Disposal ofAsbestos Wastes

Factories and Industrial Undertakings (Asbestos) Regulation

Code of practice on asbestos control - Preparation of asbestos Ainvestigation report, asbestos management plan and asbestosabatement plan

Code of practice on asbestos control - Asbestos work using full Acontainment or mini containment method

Code of practice on asbestos control - Safe Handling of Low risk Aasbestos - containing material

Code of practice on asbestos control - Asbestos work using glove Abag method

TR

TR

TR

TR

TR

TR

TR

TR

TR

TR

TR

PSS

TR

PSS

PSS

PSS

PSS

-189-



TYPE

SITE CLEARANCE

SITE CLEARANCE

SITE CLEARANCE

SITE CLEARANCE

SITE CLEARANCE

SITE CLEARANCE

SITE CLEARANCE

SITE CLEARANCE

SITE CLEARANCE

SITE CLEARANCE

SITE CLEARANCE

SITE CLEARANCE

SITE CLEARANCE

SITE CLEARANCE

SITE CLEARANCE

SITE CLEARANCE

SITE CLEARANCE

Asbestos Removal

Asbestos Removal

Asbestos Removal

Asbestos Removal

Asbestos Removal

Asbestos Removal

Asbestos Removal

Demolition

Demolition

Demolition

Demolition

Demolition

Demolition

Demolition

Demolition

Demolition

Demolition

EPD

EPD

EPD

LabourDepartment

LabourDepartment

LabourDepartment

LabourDepartment

BS6187

CAP 123

LabourDepartment

LabourDepartment

LabourDepartment

LabourDepartment

PN175

PN4

PN6

PN71

1997

1993

1988

1992

1982

1989

1989

Practice note on handling of asbestos containing materials inbuilding

Code of practice on the handling, transportation and disposal ofasbestos wastes

Code of practice on the packaging, labelling and storage ofchemical waste

Code of practice of safety and health at work asbestos

Guide to occupational disease prescribed for compensationpurposes

The protection of workers' health series: asbestos.

1992( 1993) A reference note on the control of asbestos at work

Code of practice for demolition

Building (Demolition Works) Regulations

Code of practice for scaffolding safety

Safety guidelines for demolition of building structures

The protection of workers1 health series: health hazards indemolition work

The protection of workers' health series: health hazards indemolition work

Antiquities and monuments - antiquities and monuments

Hoarding, walkways and contractors sheds - Building (Planning)Regulations Part IX

Demolition works

Demolition works - measures for public safety

A

A,Ep,T,W

A

A

A

A,Ep,T,W

A,Ep,HEC,T,W

A,C,D,H,HEC,Hy,T,W

A,HEC

A

A,Ep,Hy,T,W

HEC

A

A

A

A

PSS

PSS

PSS

PSS

PSS

PSS

PSS

PSS

TR

PSS

PSS

PSS

PSS

OS

PSS

PSS

PSS

-190-



TYPE

SITE CLEARANCE

STRUCTURE

STRUCTURE

STRUCTURE

STRUCTURE

STRUCTURE

STRUCTURE

STRUCTURE

STRUCTURE

STRUCTURE

STRUCTURE

STRUCTURE

STRUCTURE

STRUCTURE

STRUCTURES

STRUCTURES

STRUCTURES

STRUCTURES

STRUCTURES

Demolition

Falsework

General

General

Loading

Loading

Loading

Loading

Loading

Loading

Loading

Loading

Retaining Structures

Retaining Walls &Other RetainingStructures

Falsework

General

Loading

Loading

Loading

PN75

EMSD

DIN 8570 : Part 1

DIN 8570 : Part 3

AS 1523

BA

BS3134

BS5512

CAP 123

CP3

CP 3: Chapter V

CP 3: Chapter V:Part 2

BS 1564

BA

BS 5975

BS5531

BS 5400: Part 2

BS 5649: Part 6

BS 6399: Part 1

1997

1981

1983

1991

1972

1975(1983)

1992

1982

1988

1978

1982

1984

Hoarding, covered walkways and gantries (including temporaryaccess for construction traffic) - Building (Planning) RegulationsPart IX

Code of practice on design and construction of tower workingplatforms

General tolerances for welded structures - Linear and angulardimensions

General tolerances for welded structures - Geometrical tolerances

Elastomeric bearings for use in structures

Code of practice on wind effects, Hong Kong

Metric tapered roller bearings

Method of calculating dynamic load ratings and rating life ofrolling bearings

Building (Construction) Regulations, Part III, Loads

Code of basic data for the design of buildings

Loading

Wind loads

Specification for pressed steel sectional rectangular tanks

Code of Practice for Oil Storage Installation

Code of practice for falsework


Steel, concrete and composite bridges - specification for loads

Lighting columns - specification for design loads

Loading for buildings - code of practice for dead & imposedloads

PDS

A,D,Em

HEC

HEC

A,HEC,Hy,T

A,B,D,H,HEC,Hy,MTRC,T,W

AAHK

AAHK

AAHK

H

H

AAHK

A,B,Ep,HEC

A,H,HEC,Hy,MTRC,T,W

A,D,H,HEC,T

A,B,Hy,T,W

A,Em,H,HEC,Hy,T

A,D,H5HEC,T

PSS

OS

OS

PDS

PSS

PDS

PSS

TR

PSS

PSS

OS

PDS

PSS

PSS

PSS

OS

PSS

PSS

-191 -



TYPE

STRUCTURES

STRUCTURES

STRUCTURES

STRUCTURES

STRUCTURES

STRUCTURES

STRUCTURES

STRUCTURES

STRUCTURES

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

Loading

Loading

Loading

Loading

Tanks

Tanks

Tanks

Water RetainingStructures

Water RetainingStructures

General

General

General

General

General

General

Pipeline

Pipeline

Pipeline

BS 6399: Part 3

BS648

BS 8100: Part 1

CAP 123

API 650: 7thEdition

BS 2594

BS 2654

BS 8007

BS8102

BS3416

BS 3947

BS 5834: Part 2

CAP 102

UK WaterResearch Council

WSD

AWWA C 203

BS 1010

BS 1010: Part 2

1988

1964

1986

1975

1989

1987

1990

1991

1976(1997)

1983

1991

1986

1973

Loading for buildings - code of practice for imposed roof loads A,D,HEC,T PSS

Schedule of weights of building materials A,B,D,H,HEC,T, W OS

Lattice tower & masts- code of practice for loading A,D,H,HEC,T PSS

Building (Construction) Regulations, Part III, Loads TR

Welded steel tanks B,HEC PDS

Specification for carbon steel welded horizontal cylindricalstorage tanks

Specification for manufacture of vertical steel welded non-refrigerated storage tanks with butt welded shells for thepetroleum industry

Code of practice for design of concrete structures for retainingaqueous liquids

Code of practice for protection of structures against water fromthe ground

Specification for bitumen-based coatings for cold application,suitable for use in contact with potable water

Specification for liquid chlorine

Surface boxes, guards and underground chambers for gas andwaterworks purposes. Specification for small surface boxes

Waterworks Ordinance

"Water Fittings and Materials Directory"

Water Supplies Department civil engineering design manual Vol HEC,WI & II

B,HEC

B,HEC

A,B,C,D,Em,H,HEC,HysT,W

A,B,D,H,HEC3

MTRC,T

HEC,MTRC

HEC,W

W

AAHK

PDS

PDS

PSS

PSS

PDS

PDS

PDS

TR

OS

Coal tar enamel protective coatings for steel waterpipes C,HEC

Specification for draw-off taps and stop valves for water services AAHK,HEC(screw-down pattern)

Draw-off taps and stopvalves for water services (screw-down A,AAHK,D,H,pattern) HEC,MTRC,T,W

PSS

PDS

PDS

PDS

-192-



WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

BS

BS

BS

BS

BS

BS

BS

BS

BS

1212: Parti

1212: Part 2

1212: Part 3

1212: Part 4

1387

1415

1415: Parti

1415: Part 2

143 & 1256

1990

1990

1990

1991

1985(1990)

1976

1986

1986

BS 1740

BS 1968

BS21

BS 2456

1971(1990)

1953

1985

1990

BS 2871

BS 2871: Parti

BS 2871: Part 2

BS2971

1971

1972

1991

BS3505 1986

Specification for piston type float operated valves (copper alloy H,Wbody) (excluding floats)

Specification for diaphragm type float operated valves (copper H,Walloy body) (excluding floats)

Specification for diaphragm type float operated valves (plastics H,Wbodied) for cold water services only (excluding floats)

Specification for compact type float operated valves for WC H,Wflushing cisterns (including floats)

Specification for screwed and socketed steel tubes and tubulars HEQWand for plain end steel tubes suitable for welding or for screwingtoBS21 pipe threads

Mixing Valves W

Non-thermostatic, non-compensating mixing valves W

Specification for thermostatic mixing valves W

Specification for malleable cast iron and cast copper alloy HEC,Wthreaded pipe fittings

Specification for wrought steel pipe fittings (screw BS 21 R- HEQWseries thread)

Specification for floats for ballvalves (copper) HEQW

Specification for pipe threads for tubes and fittings where HEQWpressure-tight joints are made on the threads (metric dimensions) -

Specification for floats (plastics) for ball valves for hot and cold HEQWwater

Specification for copper and copper alloys tubes HEQW

Copper tubes for water, gas and sanitation H,HEC,W

Tubes for general purposes H,HEC,W

Specification for class II arc welding of carbon steel pipework for HECcarrying fluids

Specification for unplasticized polyvinyl chloride (UPVC) HEQMTRQWpressure pipes for cold potable water

- 1 9 3 -



TYPE

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

BS 3600

BS3601

BS4127

BS 4346

BS 4346: Part 1

BS 4346: Part 2

BS 4346: Part 3

BS 4622

BS 4772

BS 5041: Parti

BS 5041: Part 2

BS 5041: Part 3

BS 5041: Part 4

BS 5041: Part 5

BS5150

BS5153

BS5154

BS5155

BS5163

1997

1987(1993)

1994

1969

1970

1982

1970(1983)

1988

1987

1987

1975(1987)

1975(1987)

1974(1987)

1990

1974(1991)

1991

1984(1991)

1986(1991)

BS534 1990

Specification for dimensions and masses per unit length ofwelded and seamless steel pipes and tubes for pressure purposes

Specification for Carbon steel pipes and tubes with specifiedroom temperature properties for pressure purposes

Specification for light gauge stainless steel tubes, primarily forwater applications

Specification for joints and fittings for use with unplasticizedPVC pressure pipes



Specification for solvent cement

Specification for grey iron pipes and fittings

Specification for ductile iron pipes and fittings

Specification for landing valves for wet risers

Specification for landing valves for dry risers

Specification for inlet breechings for dry riser inlets

Specification for boxes for landing valves for dry risers

Specification for boxes for foam inlets and dry riser inlets

Specification for cast iron gate valves

Specification for cast iron check valves for general purposes

Specification for copper alloy globe, globe stop and check, checkand gate valves

Specification for butterfly valves

Specification for predominantly key-operated cast iron gatevalves for waterworks purposes

Specification for steel pipes and specials for water and sewage HEC,W

HEC,W

H,HEC,W

W

HEC,W

H,HEC,W

H,HEC,W

H,HEC,W

H,HEC5W

H,HEC,W

H,W

H,W

H,W

H,W

H,W

HEC,W

HEC,W

W

W

HEC,W

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

-194-



TYPE

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

BS 5391: Parti

BS5412

BS5413

BS 5556

BS61

BS 6572

BS 6700

BS 6730

BS 7291

BS 7291: Parti

BS 7291: Part 2

BS 7291: Part 3

BS 7291: Part 4

BS8010

BS 8010: Part 1

BS 8010: Part 2

1996

1996

1976

1978(1986)

1969(1991)

1985

1997

1986

1990(1995)

1990

1990(1995)

1990(1995)

1989

w

HEC,W

HEC

W

Specification for Acrylonitrile - butadiene - styrene (ABS)pressure pipe - Pipe for industrial uses

Specification for low-resistance single taps and combination tapassemblies (nominal size 1/2 and 3/4) suitable for operation atPN 10 max. and a minimum flow pressure of 0.01 Mpa (0.1 bar)

Specification for the performance of draw-off taps with metalbodies for water services

Specification for general requirements for dimensions andpressure ratings for pipe of thermoplastic materials (metricseries)

Specification for threads for light gauge copper tubes and fittings HEC,W

Specification for Blue polyethylene pipes up to nominal sizes W63mm for below ground use for potable water

Specification for design, installation, testing and maintenance of HEC,Wservices supplying water for domestic use within buildings andtheir curtilages

Specification for Black polyethylene pipes up to nominal sizes63mm for above ground use for cold potable water

Thermoplastic pipes and associated fittings for hot and coldwater for domestic purposes and heating installations inbuildings


Specification for polybutylene (PB) pipes and associated fittings

Specification for crosslinked polyethylene (PE-X) pipes andassociated fittings

Specification for chlorinated polyvinyl chloride (PVC-C) pipesand associated fittings

Code of practice for pipelines

Pipelines on land: general

Design, construction and installation

W

PDS

PDS

PDS

PDS

PDS

PDS

PDS

w

w

www

PDS

PDS

PDS

PDS

PDS

PDS

HEC,W

HEQW

HEC5W

PSS

PSS

PSS

-195-



TYPE

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Pipeline

Water Treatment

Water Treatment

Water Treatment

Water Treatment

BS8010: Section2.1

BS8010: Section2.4

BS 8010: Section2.5

BS 8010: Section2.5

BS 8010: Section2.7

BS864

BS 864: Part 2

BS 864: Part 5

BS EN 1057

BS EN 545

WSD

WSD

WSD

BS 6920

BS 6920: Part 1

BS 6920: Part 2

BS 6920: Part 3

1987 Ductile iron

1988 Prestressed concreted pressure pipelines

1989 Glass reinforced thermosetting plastics

1989 Glass reinforced thermosetting plastics

1989 Precast concrete

Capillary and compression tube fittings of copper and copperalloy

1983 Specification for capillary and compression fittings for coppertubes

1990 Specification for compression fittings for polyethylene pipeswith outside diameters to BS 5556

1996 Copper and copper alloys seamless round copper tubes for waterand gas in sanitary and heating applications

1995 Ductile iron pipes, fittings, accessories and their joints for water

pipelines. Requirements and test methods

1997 Manual of Mainlaying Practice

1997 Asbestos work Manual for Maintenance of Asbestos CementWatermains

1995 Guidelines for Excavation Near Water Mains

Suitability of non-metallic products for use in contact with waterintended for human consumption with regard to their effect onthe quality of the water

1996 Specification


1990( 1996) High temperature tests

HEC,W

HEC,W

W

HEC

HEC,W

HEC,W

H,HEC,W

H,HEC,W

H,HEC,W

H,HEC,W

W

W

HEC

M T R Q W

HEC,W

HEC,W

H E Q W

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

PDS

TS

PSS

PSS

PSS

PDS

PDS

TS

TS

- 196-



WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

WATER SUPPLY

Water Treatment

Water Treatment

Water Treatment

Water Treatment

Water Treatment

Water Treatment

Water Treatment

Water Treatment

Water Treatment

Water Treatment

BS 6920: Section2

BS 6920: Section2.1

BS 6920: Section2.3

BS 6920: Section2.4

BS 6920: Section2.5

BS 6920: Section2.6

BS 6920:Subsection 2.2.1



W H O

1996

1996

1996

1996

1996

1996

1996

1996

1993

Taste of water

Samples for testing

Appearance of water

Growth of aquatic micro-organisms

The extraction of metals

General method of test

Method of testing tastes imparted to water by hoses

Method of testing tastes imparted to water by hoses forconveying water for food and drink preparation

HEC,W

HEC,W

HEC,W

HEC,W

The extraction of substances that may be of concern to public HEC, Whealth

HEC,W

HEC,W

HEC,W

HEC,W

World health organisation's guidelines for drinking water quality HEQW

TS

TS

TS

TS

TS

TS

TS

TS

TS

PDS

-197-

Appendix I

Construction Standard Committee

Terms of Reference

• Advise the Construction Advisory Board on matters relating to construction standards.

• Classify, list, maintain and publish construction standards used in Hong Kong.

• Compile, maintain and publish a glossary of terms commonly used in the local construction industry.

• Identify different construction standards used for the same activities and advise on the mostappropriate means to promote uniformity and consistency.

• Recommend establishment of working groups to review construction standards used in specificsubject areas.

• Monitor and advise on alignment of particular construction standards used in Hong Kong with theircorresponding international standards.

• Advise on the setting up of a central construction standardisation body in Hong Kong.

-198-

Appendix II

Chairman

Members

Construction Standards Committee

Dr Nicky N K Chan

Mr Tony Toy

Mr D Mclearie

Mr K M Cheung

Mr Y S Chow

Mr F Chan

MrWCKeung

Mr Joseph Shek

Mr Otto Poon

Mr Thomas Ling

Mr Augustine Chow

MrHIKwong

Membership

Hong Kong Institution of Engineers

Architectural Services Department

Association of Consulting Engineers of Hong Kong

Buildings Department

Civil Engineering Department

Electrical and Mechanical Services Department

Housing Department

Hong Kong Construction Association Ltd.

Hong Kong Electrical and Mechanical Contractors' Association

Hong Kong Institute of Architects

Hong Kong Institute of Surveyors

Works Bureau

Secretary Mr Wilson W S Pang Works Bureau

-199-

To: The SecretaryConstruction Standards CommitteeWorks Bureau, 11/F Murray Building,Garden Road, Hong Kong(Attn: Mr Wilson W S PANG)(Fax No. -.2523 5327)

Construction Standards Used in Hong Kong(December 1998)

* I suggest to add the following standards in the list:

* I suggest to amend the details of the standards as marked up on the attached pages.

* delete as appropriate.

Appendix III


TYPE

Signature :

Name

Tide :

Organisation

Telephone No. :

Fax No. :

Date :

-200-

construction standards used - hku librariesebook.lib.hku.hk/hkg/b35843020.pdf · construction...

Documents