construction training & certification program · 2019-06-10 · 01 certificate of attendance by...

CONSTRUCTION

TRAINING &

CERTIFICATION PROGRAM

A Subsidiary of :

www.cidbholdings.com.my

Programs Recognized & Certified By:

Department of

Occupational Safety

& Health

(DOSH)

2

c

All information in this prospectus is considered to be true and correct at the publish

time. The information may change without notice.

The contents and information contained in this prospectus are intended for general

marketing purpose only and should not be relied upon by any person as being

complete or accurate. The information may change without notice.

To republish, must seek written permission of CIDB Holdings Sdn Bhd.

May 2019

3

CONTENTS

04

05

10 CONSTRUCTION

TRAINING &

CERTIFICATION

PROGRAMMES

11 CONSTRUCTION

PERSONNEL

COMPETENCY BASED

TRAINING PROGRAMME

(CCP PROGRAMME)

INTRODUCTION

CIDB ACT 520

19 CONTRACTOR TRAINING

PROGRAMME

(CPD PROGRAMME)

64 HEALTH, SAFETY &

ENVIRONMENT

PROGRAMME (HSE

PROGRAMME)

4

CONTACT US

ACT 520 The amended Act 520 makes it compulsory for construction

personnel to be registered with CIDB. This is to allow CIDB to

gather sufficient and accurate data on the number of

construction personnel available and needed, the relevance of

skills training programmes to the nation's need, and to keep

tabs on standards of construction workers.

The amendment also requires all construction site

supervisors and skilled construction personnel as

specified in the Third Schedule of Act 520 to be accredited by

CIDB, and to hold a valid CIDB issued certificate according to

their respective trades and skills.

This is because construction personnel who have been

certified of their skills can produce work of high quality, be

competent and highly productive. This in turn will increase the

image of the construction workforce and attract more to be

involved in this line.

Anyone caught working without proper registration and

accreditation papers will be slapped with a fine of not

exceeding RM5,000. Likewise, the same penalty will also be

imposed on employers of workers who are not accredited to

carry out construction work.

Source : Act 520 - Lembaga Pembangunan

Industri Pembinaan Malaysia Act 1994

www.cidb.gov.my

REGISTRATION OF CONSTRUCTION PERSONNEL

Excerpt of :

7

CPD

POINT

CEP

POINT

CCD

POINT

WHAT IS CCD POINT?

CCD or Contractor Continuous Development is a program that is designed to ensure

contractors registered with CIDB are continually well-informed and knowledgeable.

CCD point is acquired for contractors in order to renew contractor’s registration.

Contractors must have their scores by grade that follows the CCD requirement as

per below :

Sources : www.cidb.gov.my

WHAT IS CEP POINT?

Under Regulation 8 of the Occupational Safety and Health (Safety and Health

Officer) Regulations 1997, Occupational Safety and Health Officer who is registered

with the Department shall attend any continuous education programme at least once

in a year for the purpose of renewal of registration. The definition of the continuous

education program (Continuous Education Programme - CEP) is mainly limited to

attending courses recognized by the Department with 15 CEP points.

However, (Safety Health Officer - SHO) is also actively involved in other activities

related to occupational safety and health such as promotion, development of

standards or guidelines, and the development of competencies. Therefore, the

Department has broaden the definition of CEP to six (6) activities which will allow

SHO to conform with Regulation 8. The details of these new activities which bring

CEP points can be founding the Grading System Scoring Schedule.

Hence, this guideline mainly address the requirements for obtaining programme

approval as outlined in section 4.3 in the Grading System Scoring Schedule.

Sources : www.dosh.gov.my

WHAT IS CPD POINT?

CPD Point or known as Continuing Professional Development (CPD) point is given

by Board of Architects, Board of Engineers and Board of Quantity Surveyors.

This point is used by the professional to renew and registered their license.

Sources : www.lam.gov.my, www.bem.org.my, www.bqsm.gov.my

GRADE CCD point are required for Renewal of Registration of Contractors

1 year 2 year 3 year

G1 & G2 10 20 30

G3 & G4 20 40 60

G5 & G6 30 60 90

G7 40 80 120

8

Great Reasons

To Join CIDBH'S Training

1 Programs Offered and Certified by HRDF, ISO 9001:2008, MS ISO/IEC 17021:2011 and *Department of Occupational Safety & Health (DOSH)

2 Recognized by CIDB , professional board

3 Competent And Experience Trainers. 4 Friendly Learning Techniques. We Don’t Do Talk & Chalk! we use a wide variety of learning techniques to ensure that the learning sticks

05 Conducive Training Facilities.

06 Variety Topics Of Interest

* on selected course

9

03

01

04

02

Excellent course that give better exposure and

knowledge to participants

Haikal Hassan, Construction Supervisor

(Construction Site Supervisor & Accreditation – Civil & Structural Works)

28 – 29 November 2018

Exciting course with experienced instructors

Ahmad Basri, Contractor

(Construction Industry Payment and Adjudication Act )

18-19 July 2018

Best course ever. 5 star! Good job CIDBH

Muhammad Hakim, Contractor

(Traffic Management Officer)

5-8 Februari 2018

Excellent sharing experience from all participants

and instructor

Ahmad Faiz, Project Management Executive

(Effective Sub-Contractors Management in Construction Projects )

24-25 Sept 2018

*As written in our feedback form

10

CONSTRUCTION

PERSONNEL

COMPETENCY BASED

TRAINING PROGRAM

(CCP PROGRAM)

CONTRACTOR TRAINING

PROGRAM

(CPD PROGRAM)

HEALTH, SAFETY &

ENVIRONMENT PROGRAM

(HSE PROGRAM)

1

2

3

at CIDBH are categorised in 3 different program :

11

CONSTRUCTION PERSONNEL

COMPETENCY BASED TRAINING

PROGRAM (CCP PROGRAM)

The Construction Personnel Competency

Based Training Program were designed to

provide certification to construction personnel

on various disciplines of the industry. These

trainings are also pre-planned year-round,

covering issues on traffic management, project

management, quality management, safety

management and various other disciplines.

Participants who successfully completed the

training will receive CCD points & Certificate of

Attendance from CIDB Holdings. Those who

passed the courses will receive Certificate of

Achievement from CIDB Malaysia.

1

12

CONSTRUCTION PERSONNEL COMPETENCY BASED TRAINING PROGRAM (CCP PROGRAM)

CCD*

25 POINT/COURSE *DUE TO TERMS AND CONDITION APPLIED

COURSE OBJECTIVE

• Improving the quality of works at construction

sites through effective management by qualified

project manager

• Ensuring project manager meet the national

competency standard developed by the industry

• Recognizing and enhancing the career of project

manager

• Providing the platform for systematic

accreditation of project manager

01 Certificate of

Attendance by

CIDB Holdings

02 *Certificate of

Achievement by

CIDB Malaysia

CERTIFICATE

Certified By:

CERTIFIED CONSTRUCTION PROJECT

MANAGER

& CERTIFICATION (CCPM) Duration : 20 Days

(Course & Assessment)

Category Minimum entry qualification

Minimum

construction

related

experience

(years)

1 Registered professionals (Ir.,

Ar., Reg. QS)

3

2 Master in project

management / construction

related courses

3

3 International certificate in

project management e.g

PMP (PMI), CPM (UK), CPM

(IPMA), Reg PM (AIPM) CIOB

AIB

3

4 Degree in construction

related field

5

5 Degree in non-construction

related field

8

6 Diploma in construction

related field

8

7 Diploma in non-construction

related field

10

8 Certificates in construction

related field

10

9 Sijil Kemahiran Malaysia-

construction manager (level

5)

5

ENTRY REQUIREMENT

*Upon passing the assessment Training

packages

Learning packages (LP)

Package 1 01- Organizational management

02- Communication management

Package 2 03- Project planning

04- Project financial & funding

05- Quality management

Package 3 06- Procurement management

07-Design management & authority

liaison

08- project monitoring & control

Package 4 09- Human resources management

10- Health, safety & environment

11- Risk management

Package 5 12- Dispute resolutions

13- Initiation

14- Handing over activities

15- Project closed out

COURSE CONTENT

Visit :


13

TRAIN THE TRAINER

CCD*


COURSE OBJECTIVE

Upon completion of the course, participants will be

able to:

• Explain Competency Based Training

Approach

• State method of Instructional

• Develop Teaching Guide

• Develop Competency Assessment

• Apply effective training delivery

WHO SHOULD ATTEND

i. Executive ii. Supervisors iii. Trainer of CIDB Programs (PLBK, PLB) iv. Training Executive v. Officers From Government Agencies

COURSE CONTENTS

1. Competency Based Training (CBT)

2. Learning Theory

3. Instructional Method

4. Presentation Approach

5. Introduction to Lesson Plan

6. Introduction of Microteaching

7. Competency Assessment Development

Duration : 3 Days


Visit :


01 Certificate of

Attendance by

CIDB Holdings

02 *Certificate of

Achievement by

CIDB Malaysia

CERTIFICATE

*Upon passing the assessment

Certified By:


14

TRAFFIC MANAGEMENT

OFFICER (TMO)

CCD*


COURSE OBJECTIVE


able to:

• Understand the legislation related to traffic

management work in Malaysia.

• Knowing and skilfully identifying all hazards

and risks while managing traffic in the

workplace so as not to harm anyone who

works and also road users.

• Understand and skilfully manage traffic by

using 5-zone concepts.

• Proficient to write management reports

according to the standards set by JKR.

WHO SHOULD ATTEND

i. Open to public

Duration : 4 Days

(course & assessment)

Certified By:

COURSE CONTENT Day 1

1. Importance of Traffic Management in the work area.

2. Requirement of Traffic Management in Work Zone Area.

3. Effective Strategic Implementation of Traffic Management.

4. Safety and Health Management of the construction sector.

5. The relevant Acts and Regulations.

6. HIRARC

Day 2

1. Planning the Traffic Management Plan.

2. Design / sketch the Traffic Management Plan.

3. Traffic Management & Temporary Signage Plan.

Day 3

1. Visit to construction site and inspection.

2. PAPER 1: Presentation of paperwork.

Day 4

1. Installation and Transfer of Traffic Control Equipment.

2. Maintenance of Traffic Control Zone.

3. PAPER 2: IMPERATIVE AND SKILL ASSESSMENT (UKK).

Visit :


01 Certificate of

Attendance by

CIDB Holdings

02 *Certificate of

Achievement by

CIDB Malaysia

CERTIFICATE


ENTRY REQUIREMENT

Compulsory requirement to all JKR

Projects:

• 2 years experience in

road construction


15

TRAFFIC MANAGEMENT

SUPERVISOR (TMS)

CCD*


COURSE OBJECTIVE


able to:

• Know the laws and instructions related to road

construction work.

• Knowing the supervisory duties and

responsibilities in detail in the workplace.

• Know the hazards and risks inherent in

carrying out the work.

• Improve the quality of work that meets the

standard of work in Malaysia.

• To assist employers in monitoring work in a

safe and healthy environment.

• Find out how to control traffic and new

signage and how to use them.

• Understand Traffic Management System

conducted in this country.

01 Certificate of

Attendance

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND

i. Open to public who want to gain

knowledge in road construction

COURSE CONTENT

1. The importance of traffic management in the

work area

2. Acts, rules and instructions

3. Traffic control equipment and signage

4. The duties and responsibilities of the

supervisor

5. Traffic management and traffic control plans

6. Installation and transfer of control equipment

7. Maintenance of traffic control zones

Duration : 2 Days

(course only)

Certified By:

Visit :



16

TRAFFIC CONTROLLER

& FLAGMAN

CCD*


COURSE OBJECTIVE


able to:

• Know the laws and instructions related to road

construction work.

• Knowing their duties and responsibilities in

detail in performing work in the workplace.

• Know the hazards and risks inherent in

carrying out the work.

• Improve the quality of work that complies with

the standard of work in Malaysia.

• Helping employers work in a safe and healthy

environment.

• Know the new signage and how to arrange it.

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND

i. Open to public

COURSE CONTENT

1. Legislation and relevant instructions.

2. Hazards and job risks.

3. Traffic and signage equipment.

4. Introduction to traffic management.

5. More details about duties and responsibilities

of Traffic Controllers and Flagman

Duration : 1 Day

(course only)

Visit :


Certified By:


17

CONSTRUCTION SITE SUPERVISOR &

CERTIFICATION PROGRAMME

CCD*


COURSE OBJECTIVE


able to:

Improve the quality of work at the site by

supervision by qualified site supervisors

Ensuring that site supervisors meet NOSS's

national occupational skills standards

developed by the industry.

Recognize and enhance the site's

supervisor's career.

Provides a systematic mechanism platform

for accreditation of site supervisors

WHO SHOULD ATTEND

i. Open to public

ii. Personnel with intention to pursue Certified

Site Supervisor CIDB in Mechanical or

Electrical discipline

Certified By:

TRAINING MODULE

The structure of this module has been designed to

meet accreditation requirements based on 4

categories of construction. The categories are:

a) Civil & Structure work

b) Building & Architecture work

c) Mechanical work

d) Electrical work

Candidates can choose the category they want to get

accredited and are required to attend all the selected

special modules for accreditation as a supervisory

site supervisor by CIDB

Civil & Structure/ Building & Architecture/ Electrical &

Mechanical

01 Certificate of

Attendance by

CIDB Holdings

02 *Certificate of

Achievement by

CIDB Malaysia

CERTIFICATE


Visit :


ACADEMIC

QUALIFICATION

EXPERIENCE IN

CONSTRUCTION FIELD

No formal education > 15 years

Pendidikan Sekolah Rendah

Pendidikan sekolah

menengah

> 10 years

7 – years

5 – 7 years

Sijil politeknik

Sijil kemahairan Malaysia

Sijil kecekapan kemahiran

Sijil teknikal

> 7 years

3 – years

Diploma > 5 years

2 – 5 years

Degree

Master

Phd

> 3 years

2 – 3 years

ENTRY REQUIREMENT


18

CCP PROGRAM :

For in house training please contact :-

En Halim / Puan Ashikin/ Puan Sarah

Email : [email protected]

Phone : 03 - 4042 8880

19

CONTRACTOR TRAINING PROGRAM

(CPD PROGRAM)

The Contractor Training Program were designed

for continuous personal soft skill development

among construction personnel. Various trainings

are conducted year-round covering human

resource and site management skills, contracts

management, project planning, project risk

management, financial management and many

other issues affecting the construction industry.

Participants who successfully completed the

training will receive CCD points & Certificate of

Attendance from CIDB Holdings.

2

20

CONTRACTOR TRAINING PROGRAM (CPD PROGRAM)

BASIC CONSTRUCTION &

PROJECT PLANNING

CCD*


COURSE OBJECTIVE

Participants shall learn, refresh, and share

experiences on the basics of the followings, among

others:

• The basis of time and cost management.

• Key elements in project planning.

• The basis of a project schedule.

• The link between a work breakdown structure

and a project schedule.

• Available scheduling tools.

• Define the principles behind time and cost

estimation.

• Critical path method.

• Types of activity relationships.

• Establish a resource requirement profile.

• Estimate time and costs.

• Project budget.

• Tools and techniques for controlling project

performance.

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND

i. Fresh graduates in respective technical fields.

ii. Intermediate level of technical personnel who

has interest in project management.

iii. Technical personnel who deals with day-to-day

project / construction planning at work.

Certified By:

COURSE CONTENT

1. What is Project Planning?

2. The Importance of Project Plan

3. Steps in Planning Process

4. Planning in Concept / Initiation Stage

5. Planning in Planning Stage

6. Planning in Implementation Stage

7. Planning in Closure Stage

8. Planning Tools

9. Time and Cost Estimation

10.Budgeting

Duration : 2 Days

Visit :


21

BIM APPLICATION IN CONSTRUCTION

INDUSTRY

CCD*


COURSE OBJECTIVE


able to:

• This topic had been designed for those

involved in Construction Industry that basically

to create an awareness and theory pertaining

to BIM Application in the future of Construction

Industry.

LEARNING OUTCOME

i. To understand the future challenge of the

construction industry.

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND

i. Contractors

ii. Developers

iii. Consultants

iv. Government

Certified By:

COURSE CONTENT

1. Introduction of BIM

2. BIM Implementation

3. Construction Industry Need & Demand for BIM

4. BIM Cost significant & International Construction Industry

5. Demonstration of BIM Case Study

Duration : 2 Days

Visit :



22

BASIC FIRST AID & AED TRAINING

CCD*


COURSE OBJECTIVE


able to:

• Perform Basic Life Support Skill such as CPR

& Choking.

• Understand the importance of Automated

External Defibrillator (AED) to increase

survival rate.

• Render First Aid Management for various

injuries such as bleeding, burn, shock,

fracture, and spinal injuries.

• Understand systematic approach to survey &

diagnose patient.

• Become a Qualified First Aider & comply with

legal provision: Occupational Safety & Health

Act 1994.

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND

i. Workplace First Aider

ii. Emergency Response Team (ERT)

iii. Safety Managers and Personnel

iv. Security Managers and Personnel

v. Safety and Health Committee Members

vi. Production / Line Managers

vii. Engineers / Executive

viii. All levels of workers and interested

individuals

Certified By:

COURSE CONTENT

1. Theory Session - Dynamic & Highly Engaging Presentation

- Interactive and Fun

- Engaging audio-visual aids; real scene photographs, video clips, multimedia

presentation

2. Practical session - Hands-on experience

- Participant-centred

3. Mock-drill session - Experiential Learning

- Scenario based learning Hands-on experience

Duration : 2 Days

Visit :



23

KEPERLUAN KEMUDAHAN KESELAMATAN

KEBAKARAN DAN KELULUSAN JABATAN

BOMBA DAN PENYELAMAT MALAYSIA

CCD*


OBJEKTIF KURSUS

• Menyediakan perkhidmatan pencegahan dan

pemadaman api.

• Menguatkuasakan undang-undang yang

berkaitan dengan keselamatan dan

pencegahan kebakaran.

• Menyediakan perkhidmatan kemanusiaan yang

cekap dan berkesan.

01 Sijil Kehadiran

oleh CIDB Holdings

PERSIJILAN

i. TERBUKA KEPADA

i. Kontraktor

ii. Sub Kontraktor

iii. Ahli Jawatankuasa Penyelia,

Keselamatan dan Kesihatan

iv. Individu yang berminat

Disahkan Oleh :

KANDUNGAN KURSUS

1. Keperluan rekabentuk keselamatan kebakaran

2. Peraturan dan kelulusan pelan oleh Jabatan Bomba Dan Penyelamat Malaysia (JBPM)

3. Asas sains kebakaran

4. Kemudahan Jalan keluar Keselamatan

Tempoh : 2 Hari

Layari :



24

CORPORATE GOVERNANCE

IN CONSTRUCTION INDUSTRY

CCD*


COURSE OBJECTIVE

• Understand the principles of good corporate

governance practices

• Examines emerging good corporate

governance expectations in the construction

industry

• Apply fundamental good corporate

governance in the construction industry to

create an ethical culture

01 Certificate of

Attendance

CERTIFICATE

i. WHO SHOULD ATTEND

i. Contractors

ii. Developers

iii. Quantity surveyors, Engineers and

Architects working on green building

iv. Project and Construction managers

Certified By:

COURSE CONTENT

1. Meaning of corporate governance

2. Principals of good governance

3. Corporate governance and the construction industry

4. Framework of good governance and governance problems in the construction

industry

5. Key issues in corporate governance in the construction industry

6. Applying best practice in governance: voluntary and regulatory approaches,

rules or principles, concept of ‘comply or explain’

Duration : 2 Days

Visit :



25

EFFECTIVE PROJECT CASH FLOW

MANAGEMENT FOR CONTRACTORS

CCD*


COURSE OBJECTIVE


able to:

• Fundamentals of construction cash flow

• Forecasting project income and expenditure

interpreting/reading your cash flow

• Cash flow improvement techniques

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND

i. Contractors

ii. Construction clients

iii. Architects

iv. Quantity Surveyors

v. Engineers

vi. Construction students and researchers

vii. Contractors

viii.Interested Individuals

Certified By:

COURSE CONTENT

1. How to forecast your project cash flow

2. Constructing you project cash flow S-Curve and Saw-Tooth diagram

3. How to manage cash flow deficit and surplus

Duration : 2 Days

Visit :



26

LAW & REGULATION IN

TRAFFIC MANAGEMENT

CCD*


COURSE OBJECTIVE


able to:

• To familiarise attendees with the significant

legal requirements of the Regulations.

• To provide attendees with sufficient

knowledge to undertake the preparations

and implementation of a traffic management

plan

WHO SHOULD ATTEND

i. Safety personal/ manager ,Osh practitioner

ii. Engineer, designer, planner

iii. Supervisor ,Safety and health committee

member

iv. Interested individuals

v. Unregistered safety and health officer

Certified By:

COURSE CONTENT

1. Standard and requirement

2. Duties and responsibility

3. Law and regulation

4. Issue and challenge Traffic Management

5. Risk management and enforcement

Duration : 2 Days

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

Visit :



27

MANAGING WORKFORCE OF

DIVERSE CULTURE

CCD*


COURSE OBJECTIVE


able to:

• Grasp the concept of cultural diversity;

• Understand the importance of maintaining

professional harmony;

• Understand the values, rituals and norms of

diverse cultures;

• Create trust and promote good relationship;

• Communicate better with the foreign guests.

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND

i. Developers

ii. Contractors

Certified By:

COURSE CONTENT

1. Program opening and setting

2. Cultural Diversity

3. Norms and ethics in managing diverse workforce

4. Building rapport and bonding

5. Creating trust and respect

6. Managing welfare

7. Motivating through good communication

8. Problem solving

9. Do and don’t during multiracial communication (Workgroup)

Duration : 1 Day

Visit :



28

EFFECTIVE CLAIMS & RESPONSES

CCD*


COURSE OBJECTIVE


able to:

• To expose, share and guide the best practice

on how to manage effective claims and

response during construction.

• Roles and responsibility of Quantity Surveyor

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND

i. Quantity Surveyor

ii. Project Manager

iii. Site Supervisor

iv. Project coordinator

v. Operation Manger

vi. Project Engineer

Certified By:

COURSE CONTENT

1. Contractual Requirement

2. Contractor Obligation

3. Compensation

4. Contractor rights to claim

Duration : 2 Days

Visit :



29

CONSTRUCTION INDUSTRY PAYMENT AND

ADJUDICATION ACT (CIPAA)

CCD*


COURSE OBJECTIVE


able to:

• Familiar with salient features of CIPAA, initiate

and participated in adjudication proceedings.

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND

i. Small medium size contractors

ii. Contract administrators

iii. Quantity surveyors

iv. Project and construction managers

Certified By:

COURSE CONTENT

1. Background to CIPAA 2012 and CIPAA Framework

2. Features of CIPAA 2012 and Adjudication

3. Preparing for Adjudication Proceedings

4. Connected and Incidental Matters to Adjudication

Duration : 2 Days

Visit :



30

DISPUTE RESOLUTION IN THE

CONSTRUCTION

INDUSTRY

CCD*


COURSE OBJECTIVE


able to:

• Familiar with salient feature, structure and

procedure of Arbitration, Adjudication and

Mediation

• Initiate and participate in any of those ADR

proceedings

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND

i. Those who affiliate with construction

contracts

Certified By:

COURSE CONTENT

1. Introduction

2. Arbitration

3. Adjudication

4. Mediation

Duration : 1 Day

Visit :



31

MAXIMISING YOUR LEADERSHIP

EFFECTIVENESS

CCD*


COURSE OBJECTIVE


able to:

• Grasp the roles, skills & styles for

effectiveness in leadership

• Apply the right leadership styles/approaches

in different stages of team development

• Solve workplace problems and make

decisions effectively

• Enhance their communication skills for the

company’s objectives and strategies

• Motivate and influence others through actions,

words and creating positive feeling

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND

i. Managers

ii. Executives

iii. Project supervisors

iv. Administrative personnel

v. Business owners

Certified By:

COURSE CONTENT

1. Leadership – Role, Skills and Styles

2. Leadership and Management

3. Leadership & Team Building

4. Leadership and Problem Solving

5. Leadership & Decision Making

6. Leadership and Communication

7. Leadership and Motivation

Duration : 2 Days

Visit :



32

CONTRACT DUTIES, RESPONSIBILITIES

AND OFFENCES UNDER CIDB ACT 520

CCD*


COURSE OBJECTIVE


able to:

• Understand the main provisions under the

CIDB Act 520

• Understand the duties and responsibilities of

contractor required under the CIDB Act 520

• Understand and avoid offences as stipulated

under the CIDB Act 520

• Effectively administer and manage the

construction company according to the

requirements of CIDB Act 520

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND

i. Contractors

ii. Administrators

iii. Site supervisors and project managers

Certified By:

COURSE CONTENT

1. Introduction to CIDB Act 520

Objective of the Act

Coverage of the Act

Main provisions of the Act

2. Contractor Duties

General requirements by the Act

Specific requirements by the Act

Implications for failing to undertake the responsibilities under the Act

Contractor Code of Conduct

3. Contractor Responsibilities

Registration of Contractor

Registration of Construction Personnel

Payment of levy

4. Offences and Penalties

Types of offences

Penalties for committing offences

Implications for committing offences

Duration : 1 Day

Visit :



33

MECHANICAL & ELECTRICAL SERVICES

FOR RAILWAY ENGINEERING

CCD*


COURSE OBJECTIVE


able to:

• An overview railway engineering industry in

the world / Malaysia

• Basic track and infra design of railway

industry.

• Mechanical and electrical opportunities in

Railway industry.

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

i. WHO SHOULD ATTEND

i. Contractors and consultants that involved in

project supervision.


Site Supervisor CIDB in Mechanical or

Electrical discipline

Certified By:

COURSE CONTENT

1. Introduction to Railway Industry

2. Codes and Standard Practice

3. Safety, Infrastructure and Interfacing

4. Design Criteria and Critical Loading

5. Rolling stock, (MRO-Maintenance, Repair and Overhaul)

6. Building Services: Station, Depot, Control Centre

7. Traction Power Sub Station, converter station.

8. Signalling, communication, SCADA, earthing, LPS and SPD, electrical distribution for railway.

Duration : 2 Days

Visit :



34

M&E CONSULTING ENGINEER : ROLE

AND FUNCTION IN CONSTRUCTION

CCD*


COURSE OBJECTIVE


able to:

• An overview of CIDB Certified Site Supervisor

in Electrical

• Project coordination, monitoring and control.

• Making a Progress Report for Client.

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND




Site Supervisor CIDB in Electrical discipline.

Certified By:

COURSE CONTENT

1. Re-cap Construction Site Supervision (Electrical) PART 1

2. Project Coordination, Current Technologies and Sustainability

3. Project Monitoring, and Control

4. Post Construction

5. Roles and Responsibilities of M&E Engineers in Construction Industry.

6. Project Progress Report PART 1

7. Project Progress Report PART 2

8. Works Verification and Claims

Duration : 2 Days

Visit :



35

COST CONTROL & CASH FLOW

FOR CONTRACTORS

CCD*


COURSE OBJECTIVE


able to:

• Identify common financial issue in construction

• To differentiate cost control and cash flow

• To prepare both cost control and cash flow

calculations

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND

i. Project Managers

ii. Site Managers

iii. Account staff working with contractors

iv. Small and medium size contractors

Certified By:

COURSE CONTENT

1. Introduction

2. Cost Control

WBS/CBS

Code

Cost Allocation

Calculations

3. Cash Flow

Forecasting

Cash flow

Calculations

4. Workshop

5. Presentation

Duration : 2 Days

Visit :



36

LIGHTING PROTECTION SYSTEM, SURGE

PROTECTION SYSTEM AND GROUNDING

CCD*


COURSE OBJECTIVE


able to:

An overview lightning, surge and grounding

design and construction.

Explain case study on enhancement of LPS,

SPD and Grounding system in Malaysia

Common mistakes and FAQ in LPS, SPD and

Grounding in Malaysia.

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND





Certified By:

COURSE CONTENT

1. Introduction to LPS, SPD and Electrical Earthing

2. Codes and Standard Practice in Malaysian Industry

3. Electrical Earthing – Part 1- Electrical Safety, risk and hazard.

4. Electrical Earthing – Part 2-, Earthing types, methods.

5. Lightning Protection System (LPS)-PART 1- Source of lightning, formation of lightning, lightning

impact, world lightning, Malaysian lightning condition, facts and theory.

6. Lightning Protection System (LPS)-PART 2- Design and installation, supervision of Lightning

Protection System Installation

7. Surge Protection Device (SPD)-PART 1- Theory of surges, sources, risk, rating SPD, let through

voltage, modules

8. Surge Protection Device (SPD)-PART 2- Specifications, design and installation, supervision of

Surge Protection Device Installation.

Duration : 2 Days

Visit :



37

ROADWORK & RUNWAY CONSTRUCTION CCD*


COURSE OBJECTIVE


able to:

• Understand the process involved in the

construction of the runway system in order to

reduce the maintenance work during the

operation stage.

• Exposed and understand the basic of road

construction, quality control and road

maintenance, improve skills in strategy and

road works management and maintenance to

fulfil the mission of an organization's corporate

objectives,

• Supervise road works and road maintenance

work systematically 01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND

i. Project Engineers / Project Executives

ii. Site Supervisors

iii. Academics and educators in the field of built

environment

iv. Senior government officials involved in built

environment

v. Built environment researchers, industry

practitioners and consultants

vi. Research students with an interest in built

environment

Certified By:

COURSE CONTENT

1. Introduction Of Runway Development

2. The Runway Construction Process

3. The Runway Intelligent System.

4. Road Construction

5. Introduction To Roads Construction

6. Procurement Of Materials And Machineries

7. Work Planning

8. Quality Control

9. Road Maintenance

Duration : 2 Days

Visit :



38

WORKING AT HEIGHT CCD*


COURSE OBJECTIVE


able to:

• Working at height risk of injury

• The working at height regulations

• Basic hazard and factors

• Main precaution

• Safety working practice

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND

i. Working at height risk of injury

ii. The working at height regulations

iii. Basic hazard and factors

iv. Main precaution

v. Safety working practice

Certified By:

COURSE CONTENT

1. Overview activities involve risk of injury from working at height and typical injuries.

2. Legal responsibilities and working at height regulation

3. Basic hazard and affecting risk

4. Main precautions to prevent falls and falling materials

5. Safety working practices for common forms of access equipment

6. Inspection requirements for scaffolds

Duration : 2 Days

Visit :



39

WORKPLACE STRESS AND STRESS

MANAGEMENT

CCD*


COURSE OBJECTIVE


able to:

• Understand how stress works and develop

sustainable behaviours

• Develop personal resources and avoid stress

“overdraft”

• Recognise negative stress and its symptoms

• Identify the causes of unwanted stress

• Avoid negative stress whilst enhancing

positive experience

• Develop a balanced lifestyle in order to control

stress in the long term

• Utilise effective relaxation and stress reduction

techniques

• Develop a Personal Action Plan for Stress

Management

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND

i. Construction Personnel

ii. HSE Practitioners

Certified By:

COURSE CONTENT

1. What is a Stressor?

2. Consequences of Stress

3. Reducing & Managing Stress

4. Stress Management Interventions – Psychometric Tests

5. Future Work Trends & Challenges to Stress & Stress Management

Duration : 1 Day

Visit :



40

CONTRACT ADMINISTRATION:

UNDERSTANDING AND IMPLEMENTING

CONTRACTUAL OBLIGATIONS

CCD*


COURSE OBJECTIVE


able to:

• Disclose the salient aspects of construction

contract administration and relevant provisions

of the major standard form of contracts.

• familiar with the process and procedure of

construction contract administration.

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND

i. The target groups for this workshop are those

who affiliate with construction work.

Certified By:

COURSE CONTENT

1. Part 1: The Process of Contract Administration

2. Part 2: Major Standard Form of Construction Contracts

3. Part 3: Contractors and Construction Contracts

4. Part 4: Contract Administrators, Designers and Consultants

5. Part 5: Variation

6. Part 6: Time

7. Part 7: Dispute Resolution

Duration : 2 Days

Visit :



41

CONSTRUCTION PROJECT FINANCING CCD*


COURSE OBJECTIVE


able to:

• Review their construction project financing

practice, by reviewing the principles of

construction project financing within the

context of construction project management,

and by learning construction financing bad

and best practices.

• Understand the scope of construction project

financing,

• How construction project financing should be

established

• Identify the key construction personnel and

teams that needs to be engaged in

construction project financing, and

• Recognize the types of construction project

financing options available.

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND

i. Contractors


iii. Architects


v. Engineers


Certified By:

COURSE CONTENT

1. Construction project management

2. Construction project cash flow

3. Financing in construction project management

4. Types of construction financing

5. Implication of type of construction finance

Duration : 2 Days

Visit :



42

CONSTRUCTION ADMINISTRATIVE SCOPE

OF WORK & RESPONSIBILITY

CCD*


COURSE OBJECTIVE


able to:

• Enhanced understanding and knowledge of

every legal requirement under Act 520.

• Improve knowledge when performing tasks for

contractor and construction personnel

registration.

• Improve knowledge in project declaration

process.

• Understand the obligation in making a levy

payment.

• Understand and know the types of offenses

and disciplinary actions on contractors.

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND

i. Administrative personnel

ii. Contractors

iii. Developers

Certified By:

COURSE CONTENT

1. Introduction to Act 520

2. Provision of Documentation for Contractor and Construction Personnel Registration

3. Contractor and Construction Personnel Registration Process

4. Provision of Documentation for Project Declaration

5. Types of Contractor Violations and Offenses under Act 520

Duration : 1 Day

Visit :



43

PLANNING AND ORGANIZING SKILLS FOR

CONSTRUCTION PROJECT MANAGEMENT

CCD*


COURSE OBJECTIVE

Upon completion of the course, participants

will be able to:

• Determine planning, organization and the

concept of productivity

• Determine effective organization techniques

and process for great productivity including

planning, time management, teamwork,

delegation and the use of systems

• Produce drive to self-develop in planning and

organization

• Produce positive impact on the overall

performance of each delegate and the

organization

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND

i. Contractors

ii. Project Managers

iii. Site supervisor in the construction and related

industry.

Certified By:

COURSE CONTENT

1. Introduction to Management

2. Introduction to Planning

3. Planning Process/Cycle

4. Organizing

5. Delegation

Duration : 1 Days

Visit :



44

TRAFFIC MANAGEMENT AWARENESS CCD*


COURSE OBJECTIVE • Understand the scope of traffic management

works

• How traffic management financing should be

established

• Identify the key traffic management

personnel and teams that needs to be

engaged in every construction project

• Recognize the types of traffic management

under construction project financing options

available.

WHO SHOULD ATTEND

i. Contractors

ii. Managers

iii. Procurement


v. Engineers

vi. TMO

vii. SHO

Certified By:

COURSE CONTENT

1. ACT / ATJ 17

2. Traffic management

3. Traffic management product

4. Types of traffic management works

5. Implication of type of work / accident

Duration : 2 Days

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

Visit :



45

ESTIMATING FOR BUILDING WORKS

CCD*


COURSE OBJECTIVE

• Identify items/elements of building works

• To estimate items/elements of buildings

works

• To prepare tender for buildings works

WHO SHOULD ATTEND

i. Project Managers

ii. Builders

iii. Estimators

iv. Site Managers

v. Account staff working with contractors

vi. Small and medium size contractors

Certified By:

COURSE CONTENT

1. Introduction to Estimating and tendering of building projects

2. Estimating For;

a. Concreting works

b. Reinforcement

c. Formwork

d. Bricklaying

e. Plastering

f. Painting

g. Tiling

h. Roofing

3. Preliminary works

4. Workshop

5. Presentation

Duration : 2 Days

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

Visit :



46

PELUANG-PELUANG KONTRAKTOR KECIL

& SEDERHANA (SME) MELALUI INISIATIF IBS

CCD*


OBJEKTIF KURSUS

Setelah selesai kursus, peserta akan dapat:

• Menyampaikan maklumat mengenai polisi

kerajaan, insentif dan teknologi binaan

terkini untuk industri IBS

• Berkongsi mengenai cara pemilihan

teknologi IBS (sebagai bakal pengeluar

komponen)

• Memberi panduan mengenai pengeluaran

komponen IBS termasuk persediaan dan

operasi kilang

• Mendedahkan lain-lain peluang

perniagaan (produk/perkhidmatan)

berasaskan IBS

01 Sijil Penyertaan

oleh CIDB Holdings

SIJIL

TERBUKA KEPADA

i. Kontraktor

ii. Usahawan

iii. Individu yang ingin menjadi usahawan

Diiktiraf Oleh :

KANDUNGAN KURSUS

1. Latar Belakang IBS

2. Polisi Kerajaan Berkenaan IBS

3. Insentif untuk Penggiat IBS

4. Inovasi Terkini dalam Teknologi Binaan

5. Pemilihan Teknologi IBS

6. Pengeluaran Komponen – Persediaan & Operasi

7. Kajian kes perniagaan berkaitan IBS

Tempoh : 2 Hari

Visit :



47

PROJECT SUPERVISION OF ELECTRICAL

WORKS FOR CONTRACTORS

CCD*


COURSE OBJECTIVE


able to:

• Understand about the life cycle that relates to

electrical supervision works.

• Aware the laws and regulations including roles

and responsibilities of construction personnel.

• Able to demonstrate the supervision process

involved in electrical site supervision works.

01 Certificate of

Attendance

CERTIFICATE

WHO SHOULD ATTEND

i. Contractors

ii. Consultants that involved in project

supervision.

iii. Personnel with intention to pursue Certified


Certified By:

COURSE CONTENT

1. Introduction, Preliminaries and Planning

2. Communication and Liaison

3. Role and Responsibilities of Project Team.

4. Site Mobilisation & Preparation

5. Site Administration, Health Safety Environment And Quality Management System

6. Electrical Site Supervision Part 1



Duration : 2 Days

Visit :



48

TENDERING PROCEDURE AND

EVALUATION PROCESS

CCD*


COURSE OBJECTIVE


able to:

• Understand and discern the process of

tendering and evaluation of construction

projects.

• Identify the intricacies of tender

documentation and submission

procedure.

• Recognize the issues involved during

tender evaluation and develop winning

strategies.

WHO SHOULD ATTEND

i. Contractors

ii. Developers

iii. Quantity Surveyor

iv. Procurement Manager & Executive

v. Personnel from construction companies

Certified By:

COURSE CONTENT

1. Introduction to Tendering

2. Tender Documentation

3. Tender Preparation & Submission

4. Tender Preparation & Submission (cont.)

5. Tender Evaluation Principles

6. Tender Evaluation Plan

7. Stategy for Winning

8. Q & A, Discussion and Closing

Duration : 2 Days

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE Visit :



49

STRATEGIC CREATIVE AND

INNOVATIVE THINKING

CCD*


COURSE OBJECTIVE


able to:

• Comprehend an integrated holistic framework for

strategic thinking as a useful methodology and

input for strategic planning

• Describe how an organization can develop a first-

mover advantage position to capture

opportunities and avert threats;

• Identify early signals of business risks, threats

and opportunities and their impact on your

organization

• Engage in ‘strategic conversations’ with

strategic-minded individuals and acquire a

‘strategic curiosity and orientation’ in your

thinking and behavior

• Manage the process of strategic scenario

thinking and planning

• Initiate the actual first steps in applying scenario

thinking into your organization’s strategic

planning processes.

WHO SHOULD ATTEND

i. Contractors

Certified By:

COURSE CONTENT

1. Program opening and setting

2. Overview of strategic thinking vs strategic planning

3. Strategic Thinking Process

4. Enhancing Strategic Thinking Skills

5. Scenario analysis

6. Scenario planning

7. Tools for Scenario Planning

8. Strategic Creative Thinking in Problem Solving

9. Decision Making

Duration : 2 Day

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

Visit :



50

FINANCE FOR NON-FINANCIAL

MANAGERS AND EXECUTIVES

CCD*


COURSE OBJECTIVE


able to:

• Define the terms of financial management

• Identify finance management components

• Understand the main components of a

financial statement

• Understand costing concepts

• Relate construction industry with financial

aspects

WHO SHOULD ATTEND

i. Company Owners / Directors

ii. Finance Managers / Accountants

iii. Project Managers / Contract Managers

iv. Accounts Executives / Finance Executives

v. Quantity Surveyors and Construction

managers

Certified By:

COURSE CONTENT

1. Introduction to Financial Management

2. Understanding Financial Statement

3. Understanding Cost

4. Understanding Budgets

5. Understanding Profit and Cash Flow

Duration : 2 Days

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

Visit :



51

PROJECT SUPERVISION OF MECHANICAL

WORKS FOR CONTRACTORS

CCD*


COURSE OBJECTIVE


will be able to:

• Understand about the life cycle that relates to

mechanical supervision works.

• Aware the laws and regulations including roles

and responsibilities of construction personnel.

• Able to demonstrate the supervision process

involved in mechanical site supervision works.

WHO SHOULD ATTEND

i. Contractors


supervision.


Site Supervisor CIDB in Mechanical

disciplines.

Certified By:

COURSE CONTENT

1. Introduction Standard Practice in Mechanical Engineering

2. Air Conditioning System & Ventilation System

3. Fire Protection System

4. Cold Water Plumbing System

5. Kitchen Equipment , LPG & Compressed air system

6. Kitchen Equipment & LPG

7. Special Mechanical Services

8. Mechanical Infrastructure Works

Duration : 2 Days

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE Visit :



52

EXTENSION OF TIME (E.O.T) & VARIATION

ORDER (V.O)

CCD*


COURSE OBJECTIVE


able to:

• Awareness of provisions of delay and

extension of time and variations in the

contract.

• Understanding of the principles of extension

of time and variation.

• Better control and management of extension

of time and variation.

• Providing better judgment of extension of

time and variation efficient management.

WHO SHOULD ATTEND

i. Contractor

ii. Construction Executives

iii. Project Executives

iv. Site Engineer

Certified By:

COURSE CONTENT

1. Introduction

2. Basic Principles And Concepts

3. Grounds For Certifying EOT

4. Time For Granting Extension

5. Notice Requirements

6. Quantum Of Time Extension

7. Programs Of Work

8. Acceleration

9. Conclusion

Duration : 2 Days

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

Visit :



53

PREPARING FOR SHASSIC

CCD*


COURSE OBJECTIVE


able to:

• The process of applying for SHASSIC

application

• How SHASSIC assessment procedure is

carried out

• How SHASSIC scoring system is calculated

• The processes that needs to be in place to

achieve high SHASSIC scores.

WHO SHOULD ATTEND

i. Contractors


iii. Architects


v. Engineers


Certified By:

COURSE CONTENT

1. The construction industry SHASSIC initiative

2. Fundamentals of SHASSIC application in construction projects

3. Preparing the construction project for SHASSIC assessment

Duration : 2 Days

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE Visit :



54

PREPARING FOR QLASSIC

CCD*


COURSE OBJECTIVE


will be able to:

• The process of applying for QLASSIC

application

• How QLASSIC assessment procedure is

carried out

• How QLASSIC scoring system is

calculated

• The processes that needs to be in place

to achieve high QLASSIC scores.

WHO SHOULD ATTEND

i. Contractors


iii. Architects


v. Engineers


Certified By:

COURSE CONTENT

1. The construction industry QLASSIC initiative

2. Fundamentals of QLASSIC application in construction projects

3. Preparing the construction project for QLASSIC assessment

Duration : 2 Days

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

Visit :



55

LOCAL AUTHORITIES SUBMISSION :

UNDERSTANDING KM TO CCC FOR

CONTRACTORS

CCD*


COURSE OBJECTIVE


will be able to:

• Explain overall process in approval

submission.

• Common issues in submitting and

solutions.

• Submission flow and requirement in

obtaining KM and CC in M&E Projects.

WHO SHOULD ATTEND

i. Contractors


supervision.


Site Supervisor CIDB in Electrical or

Mechanical discipline.

Certified By:

COURSE CONTENT

1. Construction Related Laws & Regulations & Construction Governing Bodies

2. Construction Personnel

3. Liaison with Authorities and Service Providers – ELECTRICAL

4. Liaison with Authorities and Service Providers – MECHANICAL

5. Kebenaran Merancang (KM) Process

6. Authorities related submission during construction

7. CCC application and approval

8. Defects & Liability Period & CMGD Process

Duration : 2 Days

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE Visit :



56

PROJECT LEADERSHIP AND CHANGE

MANAGEMENT FOR CONSTRUCTION

PROJECT MANAGEMENT

CCD*


COURSE OBJECTIVE


able to:

• Identify the strengths and weaknesses of

different types of leadership styles

• Manage change through effective leadership

• Understand the leadership roles and actions

• Apply project leadership techniques to reduce

resistance to change

WHO SHOULD ATTEND

i. Contractors, project managers and site

supervisor in the construction and related

industry

Certified By:

COURSE CONTENT

1. Introduction to Project Leadership

2. Leadership Styles

3. Project Change

4. Project Leadership in Change Management

Duration : 1 Days

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

Visit :



57

GREEN CONSTRUCTION

CCD*


COURSE OBJECTIVE


able to:

• Green Construction practices

• How Green Construction is carried out

• Implication of the adoption of Green

Construction practices

• What needs to be done to apply Green

Construction in construction projects.

WHO SHOULD ATTEND

i. Contractors


iii. Architects


v. Engineers


Certified By:

COURSE CONTENT

1. The construction industry Green Construction initiative

2. Fundamentals of Green Construction application in construction projects

3. Implementing Green Construction in construction projects

Duration : 2 Days

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

Visit :



58

CCD*


COURSE OBJECTIVE


will be able to:

• The changing construction industry

• Risk and opportunities with the changing

construction industry

• Tools for analyzing the industry change

and decision making

• Evolving with the changes

WHO SHOULD ATTEND

i. Contractors


iii. Architects


v. Engineers


Certified By:

COURSE CONTENT

1. Construction industry & change

2. Strategic management of construction change

3. Tools for adapting to change

Duration : 2 Days

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

SURVIVING THE COMPETITIVE MALAYSIAN

CONSTRUCTION INDUSTRY

Visit :



59

CCD*


COURSE OBJECTIVE


able to strategies:

• The project implementation

• The management of construction resources

• The management of project objectives

• The management of Third Parties

• The management of project organization

WHO SHOULD ATTEND

i. Contractors


iii. Architects


v. Engineers


Certified By:

COURSE CONTENT

1. How to forecast your project cash flow

2. Constructing you project cash flow S-Curve and Saw-Tooth diagram

3. How to manage cash flow deficit and surplus

Duration : 2 Days

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

STRATEGIC IMPLEMENTATION OF

CONSTRUCTION PROJECTS

Visit :



60

PROJECT SAFETY PLAN (OSH) FOR

CONSTRUCTION PROJECTS

CCD*


COURSE OBJECTIVE

• To provide information on OSH legislation

and guidelines for developing Project Safety

Plan (PSP) or so call Safety and Health

Manual for Construction Project Team,

Contractor, safety and health practitioner and

any other interested parties.

• To adopt recommended concept on OSH

Management Systems, PDCA and SHASSIC

to develop the PSP (Safety & Health

Manual).

• To understand the Pre-Construction Stage,

Administrative Arrangement and

Construction Traffic Management Plan (if

any), requirements

WHO SHOULD ATTEND

i. Construction Project Team.

ii. Contractors.

iii. Environmental, Safety & Health Practitioners.

iv. Construction Consultants.

v. Any other interested parties.

Certified By:

COURSE CONTENT

1. Introduction to Project Safety Plan (Safety & Health Manual) For Construction Project.

2. Legislation Requirements and Guidelines.

3. Concept on OSH Management Systems, PDCA and SHASSIC in developing PSP or Safety and

Health Manual.

4. Pre-Construction Stage, Administrative Arrangement, and Construction Traffic Management Plan

(if any), requirements.

Duration : 2 Days

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

Visit :



61

MANAGING SIGNIFICANT RISK AT

CONSTRUCTION PROJECT SITES

RELATED TO TRAFFIC

CCD*


COURSE OBJECTIVE

• To provide guidance and reference for

contractors, in managing significant risk at

construction project sites related to traffic

management safety.

• To understand the concept of risk

management related to HEMP.

• To conduct Hazard Effect Management

Process (HEMP) related to traffic

management safety plan (TMSP).

• To evaluate the effectiveness of TMSP

documentation and implementation.

WHO SHOULD ATTEND

i. Construction Project Team and Contractors.

ii. Contractors Traffic Management Managers

/Teams.

iii. Any other interested parties.

Certified By:

COURSE CONTENT

1. Overview on Construction Traffic Management Safety.

2. Legislations, References, Guidelines, Terms and Definitions.

3. Introduction to Risk Management (Hazard Effect Management

4. Process – HEMP Framework).

5. HEMP Framework and Documentations.

6. Evaluation and Effectiveness of HEMP Documentation and Implementation.

Duration : 2 Days

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

Visit :



62

UNDERSTANDING UNDERGROUND

UTILITY DETECTION FOR EARTHWORKS

REQUIREMENT

CCD*


COURSE OBJECTIVE

By end of this course, participants should be able:

• To know how to enhance the earthworks

(excavation) safety on how to avoid damage

to buried live cables and other utilities. To

prevent job site accident, safeguard workers’

safety and protect company’s benefits due to

flashover or explosion occurs from cable

damaged.

.

WHO SHOULD ATTEND

i. CIDB Registered Civil & Electrical Contractors

G1-G7

Certified By:

COURSE CONTENT

1. Introduction: Guideline, Code Of Practice, Duties and responsibilities

2. Theoretical Knowledge: Electromagnetic Induction, Principle of Cable & Pipe Lines Tracing,

Method of “Passive” & “Active” Detection

3. Introduction of Cable & Pipe Locator: Usage, Limitation & Techniques, Passive and Active

Detection for Cable & Pipe,

4. Right Approach, Procedure and Steps Introduction of Non-metallic Duct Detection and Other

Accessories

5. Site Practical: Hands-on Practical of Cable locator, Locate Sonde for Non-metallic Duct

requirement, Safe Excavation Location and Procedure

6. Group Practical for Detection Works, Practice on report writing, Sketch of Utility Drawing. Review

of Test Paper and Group Detection Works of Participants

Duration : 2 Days

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

Visit :



63

CPD PROGRAM :


En Samir / En Bacroft / Puan Sarah


Phone : 03 - 4042 8880

64

HEALTH, SAFETY & ENVIRONMENT

PROGRAM

The Occupational Safety and Health Act (OSHA)

came into force in February 1994. It covers all

economic sectors, including the public services

and statutory, except those subjected to the

Merchant Shipping Ordinance and the armed

forces.

Under Section 29 (2) of OSHA 1994, there is a

need for an employer to employ a competent

person to act as a Safety and Health Officer at

the workplace. The Safety and Health Officer’s

job is to ensure compliance with the Act and

promote safe conduct of work at the workplace.

This program has been designed to address the

needs of the Act and specifically the

Occupational Safety and Health (Safety and

Health Officer) Regulations 1997.

3

65

HEALTH, SAFETY & ENVIRONMENT PROGRAM

SAFETY & HEALTH

OFFICER (SHO)

CCD*


COURSE OBJECTIVE

• Section 29 (2) of OSHA 1994, there is a need for

an employer to employ a competent person to

act as a Safety and Health Officer at the

workplace.

• The Safety and Health Officer's job is to ensure

compliance with the Act and promote safe

conduct of work at the workplace.

• This program has been designed to address the

needs of the Act and specifically the

Occupational Safety and Health (Safety and

Health Officer) Regulations 1997.

ENTRY REQUIREMENT

i. Possess Degree or Diploma

ii. Possess a minimum of SPM/SPMV/MCE or

equivalent with at least a Grade Three

Pass. General certificate (SAP) or lower

than Grade three will not be accepted.

iii. For SPM/SPMV after year 2000, a minimum

of 6C for Bahasa Melayu, English,

Mathematics AND minimum 8E for

Science/Physics/Chemistry/Biology AND

Pass other 2 subjects in 1

certificate/examination or combination.

iv. Rank Sergeant and above of Malaysian

Armed Forces (MAF) & Police (PDRM)

or minimum 10 years’ service with

MAF/Police

v. Applicants must attach ONE (1) certified

true copy of SPM/SPMV/MCE

Certificate/Diploma/Degree AND

Identification Card/Passport.

Duration : 22 Days


Certified By:

Department of

Occupational Safety

& Health

(DOSH)

01 Certificate of

Attendance by

CIDB Holdings

02 *Certificate of

Achievement by

NIOSH

CERTIFICATE

*Participants who passed the examination

Visit :


66

CCD*


COURSE CONTENT

Module 1 - Occupational Safety and Health

Management

i. Historical Perspective.

ii. Incident Prevention.

iii. Risk Assessment.

iv. Policy - Organisation & Arrangements.

v. OSH Promotion, Training & Communication.

vi. Information Technology In OSH.

vii. OSH Program.

viii. Procurement and Contractor Management.

ix. Personal Protective Equipment.

x. Emergency Response Preparedness &

Recovery Planning.

xi. First Aid.

xii. Documentation.

xiii. Incident Investigation and Corrective Action.

xiv. Performance Measurement & Monitoring.

xv. Auditing.

xvi. Management Review.

xvii. OSH Management Systems.

Module 2 - Occupational Safety and Health

Legislation

i. Introduction to OSH Legislation.

ii. OSH Act 1994 and Its Regulations.

iii. Factories and Machinery Act 1967.

iv. Regulations on Health in the Factories and

Machinery Act 1967.

v. Regulations on Safety in the Factories and

Machinery Act 1967.

vi. Fire Services Act 1988 and Its Regulations.

vii. Employment Act 1955 and SOCSO Act 1969.

viii. Petroleum (Safety Measures) Act 1984 and

Gas Supply Act 1993.

ix. Introduction & Overview of Other Related,

Legislation & Codes of Practices.

SAFETY & HEALTH

OFFICER (SHO)

COURSE CONTENT

Module 3 - Occupational Health

i. Overview of Occupational Health.

ii. Introduction and Fundamentals of Toxicology.

iii. Occupational Health Standards.

iv. Overview and Basic Principles of Industrial

Hygiene.

v. Physical and Chemical Hazards.

vi. Classification of Chemicals, Packaging &

Labelling.

vii. Chemical Safety Data Sheet.

viii. Chemical Health Risk Assessment.

ix. Chemical Hazard Management.

x. Chemical & Biological Monitoring & Medical

Surveillance.

xi. Ventilation & Indoor Air Quality.

xii. Biological Hazard.

xiii. Ergonomic & Ergonomics Risk Factors.

xiv. Occupational and Psychological Stress.

xv. Mental Workload & Shift Work.

Module 4 - Occupational Safety

i. Housekeeping and Physical Arrangement.

ii. Machinery Hazard.

iii. Safe Guarding of Machinery.

iv. Safe Machine Operation.

v. Safe of Hand Tools and Portable Power Tools.

vi. Maintenance of Machine Guards & Tools.

vii. General Area Fencing.

viii. Pressurized Equipment.

ix. Welding Safety.

x. Mechanical Handling.

xi. Site Visit.

xii. Transport Safety Defensive Driving (Forklift).

xiii. Manual Handling.

xiv. Office Safety.

xv. Electrical Safety.

xvi. Construction Safety.

xvii. Fire Safety.

xviii. Working in Confined Space.

Duration : 22 Days



67

CONSTRUCTION SAFETY &

HEALTH OFFICER (CSHO)

CCD*


COURSE OBJECTIVE

• To train and produce competent construction

safety and health officer of high calibre which in

turn will assist the industry in transforming

construction sites as a safer and better place to

work in.

WHO SHOULD ATTEND

i. Open to public

Duration : 5 Days

Certified By:

Department of

Occupational Safety

& Health

(DOSH)

COURSE CONTENT

Module 1-Introduction

i. Introduction to the course

ii. Course objectives

iii. Course outline

iv. Workplace accidents in the construction industry

v. Construction processes & activities

vi. Terminology

Module 2-Overview of OSH Legislation

i. Salient provision of OSH Legislation

ii. Occupational safety & health act 1994, regulation

& orders

iii. Factories & machinery act 1967, regulation & rules

iv. Overview of factories & machineries (building

operations & works of engineering construction

(safety) regulations 1980

v. Designs by professional engineer & approval by

the department of occupational safety & health

case study.

Module 3- Overview of OSH Management System

i. Introduction

ii. What is an OSH Management system?

iii. Global OSH Management system

iv. Overview of an OSH Management system

v. Developing an OSH Management system

vi. Previewing an OSH Management system on site

case study

Visit :


01 Certificate of

Attendance by

CIDB Holdings

02 *Certificate of

Achievement by

NIOSH

CERTIFICATE



68

CONSTRUCTION SAFETY &

HEALTH OFFICER (CSHO)

CCD*


Duration : 5 Days

COURSE CONTENT

Module 4- Pre-construction OSH Planning

i. Introduction

ii. Safety plan

• Preliminary assessment

• developing safety plan

iii. Site planning / implementation

• Utilizing preliminary assessment

output / site layout

• Appointment of safety personnel /

organization

• Arrangement with sub-contractor

iv. OSH budgeting

v. Statutory notification

vi. Temporary traffic management

vii. PPE Management / safety sign ages

viii. Case study

Module 5- Monitoring Workplace OSH

i. Site management

ii. Site safety, health, welfare provisions &

housekeeping

iii. Earthwork / excavation

iv. Piling

v. Underground services

vi. Marine work

vii. Concrete work

viii. Steel & pre-cast structure

ix. Working at height

x. Confined spaces

xi. Chemical hazards

xii. Hand & power tools

xiii. Mechanical & electrical works

xiv. Post construction

xv. Emergency preparedness

xvi. Case study

COURSE CONTENT

Module 6- Workplace OSH Inspections

i. Introduction

ii. Type of workplace inspection

iii. Objectives of in- house inspection

iv. Step of workplace inspection

v. Sample of workplace inspection report

vi. Group activities

Module 7- Accident Notification &

Investigation

i. Introduction

ii. Causes of accidents

iii. Statutory notification

iv. In-house reporting & investigation

v. Case study


69

COURSE OBJECTIVE

• Learn OSH legislative requirements pertaining

to construction industry.

• Learn how to conduct risk management at work

site.

• Assist management in managing OSH at work

place.

• Be a competent Site Safety Supervisor (SSS).

SITE SAFETY

SUPERVISOR (SSS)

CCD*


WHO SHOULD ATTEND

i. Open to public

COURSE CONTENT

1. Part I - Introduction to the Program

2. Part II – OSH Legislation

3. Part III – OSH Management System

4. Part IV – Consultation and Communication

5. Part V – Site Management

6. Part IV – Occupational Safety

7. Part VII – Occupational Health

8. Part VIII - Assessment

Duration : 10 Days

Certified By:

Department of

Occupational Safety

& Health

(DOSH)

01 Certificate of

Attendance by

CIDB Holdings

02 *Certificate of

Achievement by

NIOSH

CERTIFICATE


Visit :



70

SITE SUPERVISION AT

PROJECT SITE

CCD*


COURSE OBJECTIVE

• Overview of Occupational Safety & Health Act

1994

• Overview of Factories & Machineries Act 1967

• Overview of Construction activities

• Basic Safety Management

• Role of Safety Supervisor

• Inspection, Audit and Reporting

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND

i. Open to all interested participants

COURSE CONTENT DURATION

1. OSHA 1994 & FMA 1967

2. Construction safety activities

3. Safety Management (PDCA)

4. Safety Inspection & Auditing

5. Report Writing

6. Assessment Quiz.

7. Q & A.

2 days

Duration : 2 Days

Certified By:

Department of

Occupational Safety

& Health

(DOSH)

Visit :



71

BASIC FIRST AID, CPR

& AED TRAINING

CCD*


COURSE OBJECTIVE

• Overview of Occupational Safety & Health Act

1994

• Overview of Factories & Machineries Act 1967

• Overview of Construction activities

• Basic Safety Management

• Role of Safety Supervisor

• Inspection, Audit and Reporting

WHO SHOULD ATTEND


COURSE CONTENT DURATION

1. Perform Basic Life Support Skill such as CPR & Choking.

2. Understand the importance of Automated External Defibrillator (AED) to

increase survival rate.

3. Render First Aid Management for various injuries such as bleeding,

burn, shock, fracture, and spinal injuries.

4. Understand systematic approach to survey & diagnose patient.

5. Become a Qualified First Aider & comply with legal provision:

Occupational Safety & Health Act 1994

2 days

Duration : 2 Days

Certified By:

Department of

Occupational Safety

& Health

(DOSH)

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE Visit :



72

OCCUPATIONAL SAFETY

& HEALTH AT SCHOOL

CCD*


COURSE OBJECTIVE

• Interpret the legislative requirement and its

liabilities under OSHA 1994.

• Interpret the requirements of Regulations

under OSHA 1994.

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND


COURSE CONTENT

1. Occupational Safety and Health Act 1994.

2. Employers’ Safety and Health General Policy Statements)(Exception) Regulations 1995.

3. Safety and Health Committee Regulations 1996.

4. Safety and Health Officers Regulations and Order 1997.

5. Notification of Accident, Dangerous Occurrence, Occupational Poisoning and Occupational

Disease) Regulations 2004.

6. Hazard And Risk at School ( HIRARC)

Duration : 2 Days

Certified By:

Department of

Occupational Safety

& Health

(DOSH)

Visit :



73

HIGH RISE BUILDING EXTERNAL

MAINTENANCE SAFETY

CCD*


COURSE OBJECTIVE

• To provide fall prevention information on OSH

legislation and guidelines for maintenance,

repair and cleaning activities for contractors,

safety and health practitioner and other

interested parties.

• To provide guidelines on workplace access by

using Rope Access Systems, Gondola and

other access method.

• To adopt recommended preventive and

control measures, by conducting HIRARC,

JHA and developing Safe Work Procedure

(SWP)of fall prevention. 01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

WHO SHOULD ATTEND

i. Construction Project Team & Maintenance

Contractors.

ii. Environmental, Safety & Health Practitioners.

iii. Any other interested parties

COURSE CONTENT

1. Introduction to High Rise Building External Maintenance Safety.


3. Fall Prevention, Rope Access Systems, Gondola and other Access Method.

4. Risk Management.

Duration : 2 Days

Certified By:

Department of

Occupational Safety

& Health

(DOSH)

Visit :



74

MARINE CONSTRUCTION &

MAINTENANCE SAFETY

CCD*


COURSE OBJECTIVE

• To provide information on safety legislation

and guidelines for Marine Construction and

Maintenance Safety for contractors, safety

and health practitioner and other interested

parties.

• To relate ISPS Code and Arahan MKN No. 18

with Marine Construction and Maintenance

Work.

• To adopt recommended preventive and

control measures, by conducting HIRARC,

JHA and developing Safe Work Procedure

(SWP)of Marine Construction and

Maintenance Work.

• To understand the Pre-Marine Construction &

Maintenance Safety Stage and Administrative

Arrangement, requirements

WHO SHOULD ATTEND

i. Construction Project Team & Marine

Maintenance Contractors.

ii. Environmental, Safety & Health Practitioners.

iii. Marine Transport Security Officer (MTSO) and

Marine Facilities Security Officer (MFSO).

iv. Any other interested parties.

Certified By:

COURSE CONTENT

1. Introduction to Marine Construction and Maintenance Safety.


3. ISPS code and Arahan MKN No. 18.

4. Risk Management.

5. Pre-Marine Construction & Maintenance Safety Stage and Administrative Arrangement, requirements.

Duration : 2 Days

01 Certificate of

Attendance by

CIDB Holdings

CERTIFICATE

Visit :



75

HSE PROGRAM :


En Mohd Yasin / Puan Sarah


Phone : 03 - 4042 8880

76

FACILITIES

Clean and comfortable training area

Qualified and registered instructors

A training provider registered with PSMB (HRDF)

10 minute from PWTC LRT and 15 minutes from Putra KTM

Comfort prayer’s room for the participants

Equipped with the latest audio visual teaching aids

Near with two hotel for accommodation

Parking lot provided at PWTC and Sunway Putra Mall

Toilet with periodically cleaning

construction training & certification program · 2019-06-10 · 01 certificate of attendance by...

Documents