contemporary material technologies · modern machining, joining, and forming etc. are seeing rapid...
TRANSCRIPT
TEQIP-III Sponsored
One-week Online Short Term Course (e-STC)
On
Contemporary Material Technologies September 08-12, 2020
Organized by
Department of Industrial & Production Engineering Dr B R Ambedkar National Institute of Technology Jalandhar - 144011
Punjab, INDIA http://www.nitj.ac.in
Chief Patron Prof (Dr) Lalit Kumar Awasthi
Director, NIT Jalandhar
Patron Dr Rajeev Trehan Head, Deptt of IPE
Course Convener Dr Rakesh Kumar
Course Coordinator Dr Rajeev Verma
Course Coordinator Dr Varun Sharma
Course Organizer Dr SS Bhadauria
OUR DISTINGUISHED SPEAKERS
Dr Vivek Sharma
Soft Matter ODES-Lab,
Chemical Engineering,
University of Illinois Chicago, USA
Prof Apurbba Kumar Sharma
Department of Mechanical &
Industrial Engineering,
IIT Roorkee, UK
Dr Gaurav Manik
Department of Polymer &
Process Engineering,
IIT Roorkee, UK
Prof Vishal S Sharma
School of Mech Ind & Aero Engg,
University of the Witwatersrand,
Johannesburg, South Africa
Dr (Ms) Jyoti Menghani
Department of Mechanical
Engineering,
SVNIT Surat, Gujrat
Prof O P Panday
Senior Professor & Head, School
of Physics & Materials Science,
TIET, Patiala, Punjab
Dr Gaurav Verma
Department of Chemical
Engineering,
Panjab University, Chandigarh
Dr Amar Patnaik
Department of Mechanical
Engineering,
MNIT Jaipur, Rajasthan
Prof Harmesh Kumar Kansal
Department of Mechanical
Engineering, UIET,
Panjab University, Chandigarh
Contact: [email protected]; [email protected], [email protected]
Mobile: +91-8288012020; +91-9464740847; +91-8591113750
Department of Industrial & Production Engineering
Dr B R Ambedkar National Institute of Technology Jalandhar - 144011, Punjab, INDIA
http://www.nitj.ac.in
COURSE OUTLINE
Contact: [email protected]; [email protected], [email protected]
Mobile: +91-8288012020; +91-9464740847; +91-8591113750
Department of Industrial & Production Engineering
Dr B R Ambedkar National Institute of Technology Jalandhar - 144011, Punjab, INDIA
http://www.nitj.ac.in
For Registration: Click the link below or Scan the QR code
https://forms.gle/nMuJJv31a4XSTxP37
Last date to apply: September 2, 2020.
Prior registration is mandatory to attend the STC.
No registration fee however, limited seats are available. Registration
will be on first come - first serve basis.
Webinar meeting link and other instructions shall be shared to all
registered participants via e-mail / WhatsApp.
E-certificate shall be issued to the participants on successful
participation of the course.
REGISTRATION
The competitiveness of manufacturing sector depends upon the advancements in materials technologies. The
current trend of miniaturization, the emergence of advance materials and the growing demand of customized
manufacturing is proving catalytic in bringing a major transformation in the areas of manufacturing and
material processing. In fact, it has acquired a center-stage in the whole gamut of production engineering
research.
Various material processing technologies such as nanotechnology, biotechnology, surface engineering,
modern machining, joining, and forming etc. are seeing rapid changes to synchronize to the advent of newer
materials. Research communities all over the globe are venturing on newer experimentations leading to
further push to these areas. The proposed ‘Short Term Course’ intends to enhance the awareness level of the
young research community of this area through a three stage strategy:
In general, the course would facilitate scaling‐up of postgraduate education and demand‐driven Research
& Development.
Specifically, the course would motivate participants towards pursuing the research in the cognate areas of
nanotechnology, biotechnology, surface engineering, modern machining, joining, and forming etc.
Indirectly, the course also intends to reinforce the teaching of the focused areas of STC among the
participating faculty members.
ABOUT THE COURSE
Course intends to cover different aspects of material engineering such as:
Contemporary material trends
Material Fabrications
Material Processing
Material Testing and Characterization
Futuristic Materials and scope