contentsbasculasybalanzassv.com/wp-content/uploads/2018/09/pr-t-user-manualeng.pdf- insert the post...
TRANSCRIPT
1
표지
2
CONTENTS
PRECAUTIONS ......................................................... 3
PREFACE, OVERALL VIEW ................................ 5
DISPLAY AND KEY BOARD ................................. 6
REMOVE THE SCREW .......................................... 9
COLUMN INSTALLATION ................................... 9
OPERATION
Chapter 1. Basic Operation ................................ 10
Chapter 2. PLU Saving & Calling-up ............... 13
Chapter 3. User' s Set-up Mode ......................... 15
Chapter 4. Sales transaction ............................... 17
TECHNICAL PARAMETER ................................ 19
ERROR MESSAGE ................................................. 19
3
PRECAUTIONS
4
PRECAUTIONS
5
PREFACE
Thank you for purchasing your PR-T.
CAS scales are designed and produced under rigid quality control to deliver
outstanding performance, reliability and long life.
This manual will help you with the proper operation and care of your new
PR-T.
Please review the PR-T manual before you use the scale and keep it handy
for future reference.
■ The Pb battery of product may not be fully charged. It is recommended to
charge Pb battery using AC power before initial usage.
CHANGING THE PRINTER ROLL
■ Recommended size for thermal paper;
58mm (Width) / 65 m(Thickness) / 60mm (Maximum Diameter)
6
■ It is recommended to tear off the ticket left to right.
7
OVERALL VIEW
8
■ POLE TYPE INSTALLATIONS
- Insert the post pipe into a post bracket.
- Insert and fasten the display assembly screws.
9
DISPLAY
■ Front
■ Rear
10
Table 1 : Symbols on Display
SYMBOLS DESCRIPTION
Stable Indicator
To adjust the weight to zero.
Tare on
In the subtotal mode
Discount price
To adjust the weight to zero.
AC Power On
Low battery warning when it is below residual 20 %
KEYPAD
11
■ Function keys
KEYS FUNCTIONS
SALES MODE PROGRAM MODE
~ To input all numerical data
To input double zero
To clear all of numbers input on the display
To set zero
To set or clear tare value
To go to program mode
To call up a PLU with numeric key
To input non-weighed item
SHIFT : To select alternate key functions
To show subtotal / total / payment sum
~
Direct PLU keys * PLUs # 1~30 may be used for both
the direct and indirect PLUs. Most commonly used 30 items are recommended to be used for
direct PLUs for users' convenience.
Alphabet Key(A~Z key)
To change key map
12
REMOVE THE SCREW
Remove the crew
NOTICE:Make sure to remove the screw before use at the first time.
COLUMN INSTALLATION
Column Installation
13
14
2. PROGRAMMING Program Mode Menu Tree
Sale
PLU
Inventory
Tax
Tare
Delete
PLU
Tax
Tare
All
Print list PLU list
Tax list
Tare list
Print Report
PLU report
Tax Report
Monthly Report
Weekly Report
Hourly Report
Print Total Report
Delete Report
Total Report
Monthly Report
Weekly Report
Hourly Report
All Report
Scale Settings
DATE/TIME
Use PLU tare
Use inventory
Suspend
Define speed key Set
Reset
Printer Set
Header/Footer Message
Settings
Image Print Use Image Print
Test Image
Line feed
Print PLU details after Make PLU
Print bill
Print intensity
Barcode
Use PLU Barcode
PLU Barcode format
Use Total Barcode
Total Barcode format
Test
AD
Display
Key
Printer
Battery
Memory
15
Rs232
2.1 SALE Programming
2.1.1 Create/Edit PLU You can set 8 items for a PLU as below table and if you do not want to use some items
No Item Description
1 PLU No PLU No. 1 to 300
2 PLU Type Select PLU type among By Weight, By Count
3 (Unit) Price This value can be from 1 to 999999.
4 Item Code Item Code can be from 0 to 99999.(optional)
5 Tax No. Enter tax index number. This value can be from 0 to9(optional)
6 Tare No.* Enter tare index number. This value can be from 0 to9 (optional, only By-weight PLU)
7 Inventory (optional)
8 Name Enter name 1 of item. Maximum 32 characters. (optional)
* These items are shown on the display when you select By Weight PLU.
16
Sample Create/Edit PLU Operation
Operation Key Display
Remark Weight Unit Total
MENU [MENU] Enter Menu
Sale Menu
[*] Enter Sale Menu
PLU menu
[*] Enter PLU menu
PLU no. [0] [*]
Enter PLU No.
PLU type [1] [0] [*]
.
Press [0] or [1] Key can change PLU type Weight to Non-weight.
PLU Unit Price
[1][2][5][0] [*]
.
Input unit price. (Critical Item Must be not 0)
PLU Itemcode
[2][0][3][4] [*]
Input Item-code for Barcode(optional)
PLU NAME
[A/PLU01] [P/PLU16] [P/PLU16] [L/PLU12] [E/PLU05]
[*]
When create a PLU, PLU name is filled with space(32) Enter the PLU name by Alphabet key
PLU TAX [1] [2] [*]
.
.
Input tax index No.(optional) #1 4.00% exclude #2 5.00% include
PLU TARE
[1] [2] [*]
.
.
.
Input tare index No.(optional)*
PLU Inventory
[1][0][0][0] .Input PLU inventory (optional)**
PLU menu [*]
Move back to SALE menu
*) Settings:USE PLUTare가 NO일 경우 보이지 않음
**) Settings:USE Inventory가 NO일 경우 보이지 않음
17
18
2.1.2 Edit Inventory
설명 추가할 것
Sample Edit Inventory Operation
Operation Key Display
Remark Weight Unit Total
MENU [MENU] Enter Menu
Sale Menu [*] Enter Sale Menu
Inventory menu
[VOID/→] [*]
Enter Inventory menu*
Input PLU No.
[1] [*]
.Enter PLU No.**
Edit Inventory
value [5][0][0][0] . Input inventory value
Tax Menu [*] Move back to SALE menu
*)Parameter: USE Inventory가 NO일 경우 Dontuse 라고 표시됨
**) if PLU doesm’t exist, Display “PLU empty”
19
2.1.3 Create Tax
설명 추가 : exclude, include SAMPLE Create/Edit Tax Operation
Operation Key Display
Remark Weight Unit Total
MENU [MENU] Enter Menu
Sale Menu [*] Enter Sale Menu
Tax menu [VOID/→] [VOID/→]
[*]
Enter Tax menu
Tax No. [1] [*]
.Enter tax No.
Tax value Tax Type
[1][0][0][0] [VOID/→]
.
.
Input Tax value Press [VOID/→], [ADD]/[ ←] key to change tax type (‘I’ include/’E’ excluse)
Tax Menu [*] Move back to SALE menu
2.1.4 Create PLU Tare index
SAMPLE Create/Edit Tare Operation
Operation Key (e.g)
Display Remark
Weight Unit Total
MENU [MENU] Enter Menu
Sale Menu [*] Enter Sale Menu
Tare menu
[VOID/→] [VOID/→] [VOID/→]
[*]
Enter Tare menu
Tare No. [1] [*]
.Enter Tare No.
Tare weight
[3][0][0][0] [*]
. Input Tare weight
Tare Menu Move back to SALE menu
Parameter: USE PLU TARE가 NO일 Dontuse 라고 표시
20
2.1.5 Delete sale items
SAMPLE Delete sale item Operation
Operation Key (e.g)
Display Remark
Weight Unit Total
MENU [MENU] Enter Menu
Sale Menu
[*] Enter Sale Menu
Delete item
menu
[VOID/→] [VOID/→] [VOID/→] [VOID/→]
[*]
Enter delete item menu Press [VOID/→], [ADD]/[ ←] key to change items
1. PLU 2. Tax 3. Tare 4. All
[*]
Delete item start
[1][0] [*]
Input start PLU number to delete PLU list
Delete item list
No. [2][2]
Input end PLU number to delete PLU list
Delete item
[*] Move back to Sale menu
2.2 List & Report 2.2.1 Print list
Operation Key (e.g)
Display Remark
Weight Unit Total
MENU [MENU] Enter Menu
Print Menu
[VOID/→] [*]
Enter Print Menu
Print list menu
[*]
Select items 1. PLU 2. Tax 3. Tare(*)
Select Print item
no
[5] [*]
[2][0][0]
Input start item number to print list Input end item number to print list
Print Item list
[*] Print item list completely, Move back to Print menu
21
(*) Parameter: USE PLU TARE가 NO일 경우 보이지 않음
22
2.2.2 Print Report
Operation Key (e.g)
Display Remark
Weight Unit Total
MENU [MENU] Enter Menu
Print Menu
[VOID/→] [*]
Enter Print Menu
Select report menu
[VOID/→] [*]
Select items 1. PLU 2. Tax 3. Hourly 4. Weekly 5. Monthly
Print report
[*] [VOID/→]
Print Report : yes
[*]
Print item report completely Move back to Print menu
2.2.3 Print Total Report
Operation Key (e.g)
Display Remark
Weight Unit Total
MENU [MENU] Enter Menu
Print Menu
[VOID/→] [*]
Enter Print Menu
Select report menu
[VOID/→] [VOID/→]
[*]
Print total report list
Print total report
[*] Move back to Print menu
Parameter: Total Report에 같이 출력되는 Report가 있는 경우
Clear할 때 같이 클리어 된다.
23
2.3 Set 2.3.1 DATE/TIME
Operation Key (e.g)
Display Remark
Weight Unit Total
MENU [MENU] Enter Menu
Set Menu [VOID/→] [VOID/→]
[*]
Enter Set Menu
Set Date
[*] [1][3] [0][6] [1][2]
[*]
..
..
..
..
..
..
..
..
..
..
Edit Date YY/MM/DD Press [*] key to accept
Set Time [1][7] [2][0] [0][0]
..
..
..
..
..
..
Edit Time HH/MM/SS Press [*] key to accept
[*] Set date/time. Move back to set menu
2.3.2 Use PLU Tare
Operation Key (e.g)
Display Remark
Weight Unit Total
ㅖㅇㄹ [MENU] Enter Menu
Set Menu [VOID/→] [VOID/→]
[*]
Enter Set Menu
enter Use Tare Index
menu
[VOID/→] [*]
Enter Use Tare Index Menu (Default: off)
Set Use Tare Index
[VOID/→] [ADD]/[ ←]
Set Use Tare Index
[*] Set Use Tare index Move back to set menu
Use Tare Index – When this Settings set off, can’t Use tare index in PLU programming.
24
2.3.3 Use Inventory
Operation Key (e.g)
Display Remark
Weight Unit Total
MENU [MENU] Enter Menu
Set Menu [VOID/→] [VOID/→]
[*]
Enter Set Menu
enter Use Tare Index
menu
[VOID/→] [VOID/→]
[*]
Enter Use Inventory Menu (default :off)
Set Use Tare Index
[VOID/→] [ADD]/[ ←]
Set Use inventory
[*] Set Use inventory. Move back to set menu
Use Inventory – When this Settings set off, can’t Use inventory in PLU programming. 2.3.4 Suspend display
설명 필요
Operation Key (e.g)
Display Remark
Weight Unit Total
MENU [MENU] Enter Menu
Set Menu [VOID/→] [VOID/→]
[*]
Enter Set Menu
enter power save menu
[VOID/→] [VOID/→] [VOID/→]
[*]
Enter power save Menu (default :20 seconds) Off,20,40,60 sec
Set power save
[VOID/→] [VOID/→]
Set suspend display time
[*] Set suspend display Move back to set menu
25
2.4 Printer Setting
2.4.1 Header/Footer Message Programming
Operation Key (e.g)
Display Remark
Weight Unit Total
MENU [MENU] Enter Menu
Printer Set Menu
[VOID/→] [VOID/→] [VOID/→]
[*]
Enter Printer Set Menu
Printer Set Menu
[*] Enter header Set Menu
Select header
[3] [ADD]/[ ←]
[*]
Select header 1: header 1 2: header 2 3: header 3 4: footer
Set header
[6][7] [VOID/→]
[6][5] [VOID/→]
[8][3]
Set header. When create a header that filled with space(32) Enter the header by referring ASCII codes. Press [VOID/→] key to move forward. Press [ADD]/[ ←]key to move backward. Press [C]key to clear one character Press [*] key to save header Only 32-126 ASCII code are acceptable.
[*]
Press [*] key to accept Set header completely, display ‘done’ with beep Move back to printer setting menu
26
2.4.2 Header/Footer Setting Programming
Operation Key (e.g)
Display Remark
Weight Unit Total
MENU [MENU] Enter Menu
Printer Set Menu
[VOID/→] [VOID/→] [VOID/→]
[*]
Enter Printer Set Menu
Printer Set Menu
[*] Enter header Set Menu
Select header
[3] [ADD]/[ ←]
[*]
Select header 1: header 1 2: header 2 3: header 3 4: footer
Set header
[6][7] [VOID/→]
[6][5] [VOID/→]
[8][3]
Set header. When create a header that filled with space(32) Enter the header by referring ASCII codes. Press [VOID/→] key to move forward. Press [ADD]/[ ←]key to move backward. Press [C]key to clear one character Press [*] key to save header Only 32-126 ASCII code are acceptable.
[*]
Press [*] key to accept Set header completely, display ‘done’ with beep Move back to printer setting menu
27
2.4.3 Image Use
Operation Key (e.g)
Display Remark
Weight Unit Total
MENU [MENU] Enter Menu
Printer Set Menu
[VOID/→] [VOID/→] [VOID/→]
[*]
Enter Printer Set Menu
Printer Set Menu
[VOID/→] [*]
Enter Image Print Menu
Print Test Image
[*] Ask Print test image
[*]
Press [*] key to accept print test image completely, display ‘done’ with beep Move back to printer setting menu
Note: Use image print 가 off 일 경우 보이지 않음
2.4.4 Image Test
Operation Key (e.g)
Display Remark
Weight Unit Total
MENU [MENU] Enter Menu
Printer Set Menu
[VOID/→] [VOID/→] [VOID/→]
[*]
Enter Printer Set Menu
Printer Set Menu
[VOID/→] [*]
Enter Image Print Menu
Print Test Image
[*] Ask Print test image
[*]
Press [*] key to accept print test image completely, display ‘done’ with beep Move back to printer setting menu
Note: Use image print 가 off 일 경우 보이지 않음
28
2.4.5 Line feed
Operation Key (e.g)
Display Remark
Weight Unit Total
MENU [MENU] Enter Menu
Printer Set Menu
[VOID/→] [VOID/→] [VOID/→]
[*]
Enter Printer Set Menu
Printer Set Menu
[VOID/→] [VOID/→]
[*]
Enter line feed Menu
Set line feed
[5] Set Line Feed
[*]
Press [*] key to accept Set line feed completely, display ‘done’ with beep Move back to printer setting menu
2.4.6 Print PLU details after prgramming
Operation Key (e.g)
Display Remark
Weight Unit Total
MENU [MENU] Enter Menu
Printer Set Menu
[VOID/→] [VOID/→] [VOID/→]
[*]
Enter Printer Set Menu
Printer Set Menu
[VOID/→] [VOID/→] [VOID/→]
[*]
Enter print PLU details Menu
Set line feed
[VOID/→] Set Print PLU
[*]
Press [*] key to accept Set print PLU completely, display ‘done’ with beep Move back to printer setting menu
29
2.4.7 Print bill
Operation Key (e.g)
Display Remark
Weight Unit Total
MENU [MENU] Enter Menu
Printer Set Menu
[VOID/→] [VOID/→] [VOID/→]
[*]
Enter Printer Set Menu
Printer Set Menu
[VOID/→] [VOID/→] [VOID/→] [VOID/→]
[*]
Enter print bill Menu (default : on) Off : don’t print bill
Set line feed
[VOID/→] Set Print bill
[*]
Press [*] key to accept Set print bill completely, display ‘done’ with beep Move back to printer setting menu
2.4.8 Print intensity
Operation Key (e.g)
Display Remark
Weight Unit Total
MENU [MENU] Enter Menu
Printer Set Menu
[VOID/→] [VOID/→] [VOID/→]
[*]
Enter Printer Set Menu
Printer Set Menu
[VOID/→] [VOID/→] [VOID/→] [VOID/→] [VOID/→]
[*]
Enter print bill Menu (default : on) Off : don’t print bill
Set line feed
[1][5] Set print intensity
[*]
Press [*] key to accept Set print intensity completely, display ‘done’ with beep Move back to printer setting menu
30
2.4.9 duplicate bill
Operation Key (e.g)
Display Remark
Weight Unit Total
MENU [MENU] Enter Menu
Printer Set Menu
[VOID/→] [VOID/→] [VOID/→]
[*]
Enter Printer Set Menu
Printer Set Menu
[VOID/→] [VOID/→] [VOID/→] [VOID/→] [VOID/→] [VOID/→]
[*]
Enter print bill Menu (default : on) Off : don’t print bill
Set line feed
[VOID/→] Set print intensity
[*]
Press [*] key to accept Set print intensity completely, display ‘done’ with beep Move back to printer setting menu
31
ERROR MESSAGES
Table 18 : Error Messages
Error Message on Display
Description Solution
CHECK PAPER Problem with ticket paper roll Please check paper
- - - - - Overloaded
Please remove the item from the platter and put only appropriately weighed item(s) on the platter
Price Over When total price exceeds 99999.99 this message is displayed with beep
Please input appropriate number within maximum capacity on the display.
Weight Over When weight exceeds max capacity is displayed with beep
Please remove the weight on the tray.
Weight Minus When weight below zero displayed with beep
Please check the weight on the tray.
CAL ERROR
When turning on the scale this message may be displayed with continuous beep and it is automatically turned off.
Please call your CAS dealer.
INIT ERROR
Please remove the item from the platter and put only appropriately weighed item(s) on the platter.
Error Message on Receipt
Description Solution
CLOCK IS NOT SET This error may happen in case of low backup battery or some hardware error!
Please call your CAS dealer when there is still error after setting DATE & TIME in MENU -> SET2.
ERROR POSSIBLE RAM DATA ARE CORRUPTED! RESETING ALL RAM DATA.. PLEASE RESTART THE SCALE
This message is printed when the control sums of RAM is not correct. In such case the processor clears the RAM automatically. And all of sums, settings and PLU are deleted!
Please call your CAS dealer
32
SPECIFICATION
Table 19 : SPECIFICATION
Model PR-T
CAPACITY 6 kg 15 kg 32 kg
Division, e= 1 g 2 g 5 g
Minimum weight ※ 20 g 40 g 100 g
DISPLAY Alpha-numeric LCD 7/7/7 (Weight / Unit Price / Total price)
PRINTER INFO.
Thermal printer - 32 Characters per line Printing Speed : Max 75 mm/sec Recommended size for thermal paper;
58mm (Width) / 65μm(Thickness) / 60mm (Maximum Diameter)
PRINTER RELIABILITY
HEAD PULSE- RESISTANCE
100,000,000 pulses or more
HEAD WEAR- RESISTANCE
50km or more
PLU MEMORY CAPACITY 30 Direct PLUs, 270 Indirect PLUs, 2 Special PLUs
POWER AC 230V, 50 ~ 60Hz
OPERATING TEMPERATURE -0℃ ~ +40℃
EXTERNAL UTILITIES Default: RS232C
POWER CONSUMPTION Maximum 35W
BATTERY LIFE
■ Rechargeable Battery (inside): 12V 2.6Ah (Pb) ■ Battery life (continuous usage)
• Weighing Mode only: 240mA, 28 hrs • With backlight: 260mA, 26 hrs • With printer: 1800mA, 4 hrs
PRODUCT SIZE (mm) B Type : 342(W) X455(D) X 152(H) P Type : 342(W) X455(D) X 413(H) R Type : 342(W) X455(D) X 488(H)
PRODUCT WEIGHT Standard type : 6.8 kg Pole type : 8 kg R type : 8.5 kg
※ Minimum weight to make a sale transaction
▶ Notice: specifications are subject to change for improvement without notice.
33
MEMO
34
MEMO
35