contents before you start components & parts...

2
BEFORE YOU START 1. 4in1 is for riders 1 to 7 years old. 2. Do not exceed 120 lbs (54 kilograms) total weight on the scooter. 3. Always wear proper protective equipment, such as a helmet, elbow, wrist, hand, and knee pads. Always keep the chinstrap securely buckled on the helmet. Long sleeve shirt, long pants, shoes, and elbow and knee pads are strongly encouraged. 4. Use the scooter only on flat, dry, level ground without loose debris like rocks or gravel. Keep shoelaces out of the way of wheels or pivots. 5. Never use the scooter at dusk or night, or in wet or icy conditions. Wet weather impairs traction, braking, and visibility. 6. Avoid sharp bumps, drainage gates, and sudden surface changes. Avoid water, speed bumps, sand, gravel, and anything else that could cause the wheels to suddenly stop. When in doubt, avoid bumps. 7. Do not wear anything that obstructs visibility or function when riding the scooter. 8. Watch out for pedestrians. Avoid excessive speed. 9. Never ride in traffic or on the street, and watch your surroundings for pedestrians, bikes, and skateboard and scooter riders. Use the scooter in areas free from fixed or moving hazards such as poles, curbs, hydrants, walls, parked automobiles, and traffic. 10. Keep hands and feet clear of steering mechanisms at all times. 11. Always check and secure all fasteners before every ride. Make sure the SPRING BUTTONS and RISER TUBE CLAMPS are properly positioned and fully tight. 12. Do not attempt to jump over large objects. 13. Always avoid excess speed associated with downhill rides. Avoid steep inclines and do not ride too fast – you can lose control and fall. 14. Always replace worn or broken parts immediately. Email us at [email protected]. AN IMPORTANT MESSAGE TO PARENTS This manual contains important safety information. For your child’s safety, it is your responsibility to review this information with your child and make sure that your child understands all warnings, cautions, instructions, and safety topics. Nextsport recommends that you periodically review and reinforce the information in this manual with younger riders, and that you inspect and maintain your child’s scooter to ensure their safety. Read the instructions carefully and assemble the scooter according to these instructions before you allow the child to ride. This scooter requires assembly by an adult. A CAUTION ABOUT SCOOTER RIDING You will see people on various videos and maybe even people you know doing tricks, stunts, and jumps. These are people who have been practicing on scooters for an extended period of time. Build your skills gradually in order to minimize risk and injury. Skateboard parts are not designed for scooters. 1 FAILURE TO USE COMMON SENSE AND HEED THE ABOVE WARNINGS FURTHER INCREASES RISK OF SERIOUS INJURY. USE AT YOUR OWN RISK AND WITH APPROPRIATE AND SERIOUS ATTENTION TO SAFE OPERATION. USE CAUTION. CONTENTS BEFORE YOU START page 1 COMPONENTS & PARTS page 2 ASSEMBLING YOUR 4in1 page 3 SEAT ASSEMBLY page 3 HANDLE BAR ASSEMBLY page 3 UNLOCK PIVOT HANGER page 3 ADJUSTING RISER HEIGHT page 3 BRAKE USE page 4 HOW TO RIDE page 4 MAINTENANCE & BEFORE YOU RIDE page 5 COMPANY & WARRANTY INFORMATION page 6 Read and understand this entire manual before using this product. DO NOT RETURN PRODUCT TO STORE! we want to help you directly! For assistance, contact [email protected] www.fuzionscooter.com ASSEMBLING YOUR 4in1 SEAT ASSEMBLY: SHORT RISER STEERING TUBE: TALL RISER STEERING TUBE: HANDLE BAR ASSEMBLY: UNLOCK PIVOT HANGER: COMPONENTS & PARTS 4in1 COMPONENTS LIST: Front Hanger Assembly Deck Foot Brake Seat Seat Bolt Tall Riser Tall Riser Lower Clamp Tall Riser Upper Clamp Tall Riser Handle Bar Clamp Short Riser Short Riser Lower Clamp Short Riser Handle Bar Clamp Handle Bar Pivot Locking Bolt (Front Pivot x 1, Rear Pivot x 1) Allen Wrench x 2 1 11 11 1 2 12 12 2 3 13 13 3 4 4 14 14 5 5 6 6 15 15 7 7 8 8 9 9 10 10 2 1 1 1 2 2 2 3 3 Visit our website www.fuzionscooter.com for product support, replacement parts and general help. Insert front hanger assembly into steering tube. After handle bar is inserted, make sure spring button pops out of hole in steering tube. Use allen wrench to unlock the front pivot to allow carving turns. Slide the seat on to steering tube to the desired height. Tighten clamp securely. Remove rear pivot hanger lock with allen wrench to allow carving turns. Secure seat with seat bolt. Install handle bar for either tall or short riser. ADJUST TALL RISER HEIGHT: Loosen clamp to adjust steering tube height. NOTE: Do NOT ride with one bolt locked. WARNING: Both front and rear pivot locks need to be securely locked while seat is in use. Other stages are optional. owner’s manual owner’s manual owner’s manual owner’s manual

Upload: others

Post on 19-Jul-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: CONTENTS BEFORE YOU START COMPONENTS & PARTS …fuzionscooter.com/wp-content/uploads/2015/09/4in1-Manual_English.pdfTURNING YOUR SPORT: Your Fuzion Sport has independent control of

BEFORE YOU START1. 4in1 is for riders 1 to 7 years old.

2. Do not exceed 120 lbs (54 kilograms) total weight on the scooter.

3. Always wear proper protective equipment, such as a helmet, elbow, wrist, hand, and knee pads. Always keep the chinstrap securely buckled on the helmet. Long sleeve shirt, long pants, shoes, and elbow and knee pads are strongly encouraged.

4. Use the scooter only on flat, dry, level ground without loose debris like rocks or gravel. Keep shoelaces out of the way of wheels or pivots.

5. Never use the scooter at dusk or night, or in wet or icy conditions. Wet weather impairs traction, braking, and visibility.

6. Avoid sharp bumps, drainage gates, and sudden surface changes. Avoid water, speed bumps, sand, gravel, and anything else that could cause the wheels to suddenly stop. When in doubt, avoid bumps.

7. Do not wear anything that obstructs visibility or function when riding the scooter.

8. Watch out for pedestrians. Avoid excessive speed.

9. Never ride in traffic or on the street, and watch your surroundings for pedestrians, bikes, and skateboard and scooter riders. Use the scooter in areas free from fixed or moving hazards such as poles, curbs, hydrants, walls, parked automobiles, and traffic.

10. Keep hands and feet clear of steering mechanisms at all times.

11. Always check and secure all fasteners before every ride. Make sure the SPRING BUTTONS and RISER TUBE CLAMPS are properly positioned and fully tight.

12. Do not attempt to jump over large objects.

13. Always avoid excess speed associated with downhill rides. Avoid steep inclines and do not ride too fast – you can lose control and fall.

14. Always replace worn or broken parts immediately. Email us at [email protected].

AN IMPORTANT MESSAGE TO PARENTSThis manual contains important safety information. For your child’s safety, it is your responsibility to review this information with your child and make sure that your child understands all warnings, cautions, instructions, and safety topics. Nextsport recommends that you periodically review and reinforce the information in this manual with younger riders, and that you inspect and maintain your child’s scooter to ensure their safety. Read the instructions carefully and assemble the scooter according to these instructions before you allow the child to ride. This scooter requires assembly by an adult.

A CAUTION ABOUT SCOOTER RIDINGYou will see people on various videos and maybe even people you know doing tricks, stunts, and jumps. These are people who have been practicing on scooters for an extended period of time. Build your skills gradually in order to minimize risk and injury. Skateboard parts are not designed for scooters.

1

FAILURE TO USE COMMON SENSE AND HEED THE ABOVE WARNINGS FURTHER INCREASES RISK OF SERIOUS INJURY. USE AT YOUR OWN RISK AND WITH

APPROPRIATE AND SERIOUS ATTENTION TO SAFE OPERATION. USE CAUTION.

CONTENTS

Before You Start page 1

ComponentS & partS page 2

aSSemBling Your 4in1 page 3

Seat aSSemBlY page 3

HanDle Bar aSSemBlY page 3

unloCK piVot Hanger page 3

aDJuSting riSer HeigHt page 3

BraKe uSe page 4

How to riDe page 4

maintenanCe & Before You riDe page 5

CompanY & warrantY information page 6

Read and understand this entire manual before using this product.

DO NOT RETURN PRODUCT TO STORE!we want to help you directly!

For assistance, contact [email protected]

www.fuzionscooter.com

ASSEMBLING YOUR 4in1

SEAT ASSEMBLY:SHORT RISERSTEERING TUBE:

TALL RISERSTEERING TUBE:HANDLE BAR ASSEMBLY:

UNLOCK PIVOT HANGER:

COMPONENTS & PARTS

4in1 COMPONENTS LIST: Front Hanger Assembly Deck Foot Brake Seat Seat Bolt Tall Riser Tall Riser Lower Clamp Tall Riser Upper Clamp Tall Riser Handle Bar Clamp Short Riser

Short Riser Lower Clamp Short Riser Handle Bar Clamp Handle Bar Pivot Locking Bolt (Front Pivot x 1, Rear Pivot x 1) Allen Wrench x 2

1 11

11

1

2 12

12

2

3 13

13

3

4

4 14

14

5

5

6

6

15

15

7

7

8

8

9

9

10

10

2

1

1

1

2

2

2

3

3

Visit our websitewww.fuzionscooter.comfor product support,

replacement partsand general help.

Insert front hanger assembly into steering tube.

After handle bar is inserted, make sure spring button pops out of hole in steering tube.

Use allen wrench to unlock the front pivot to allow carving turns.

Slide the seat on to steering tube to the desired height.

Tighten clamp securely.

Remove rear pivot hanger lock with allen wrench to allow carving turns.

Secure seat with seat bolt.

Install handle bar for either tall or short riser.

ADJUST TALLRISER HEIGHT:

Loosen clamp to adjust steering tube height.

NOTE:Do NOT ride with one bolt locked.

WARNING: Both front and rear pivot locks need to be securely locked while seat is in use. Other stages are optional.

owner’s manualowner’s manualowner’s manualowner’s manual

Page 2: CONTENTS BEFORE YOU START COMPONENTS & PARTS …fuzionscooter.com/wp-content/uploads/2015/09/4in1-Manual_English.pdfTURNING YOUR SPORT: Your Fuzion Sport has independent control of

Manual Version 1A-2015Maximum Weight: 120 lbs (54 kilograms)

owner’s manualfor riDerS ageS 1-7 YearS

Check the brake.

Tighten the clamp.

Tighten and secure the wheels and axles.

Make sure the wheels spin freely.

Be sure to wear all properly adjusted safety gear.

RIDER’S CHECK LISTBefore riding, remember to:

54

MAINTENANCE TIPSIt is the responsibility of the owner or guardian to periodically inspect the wheels, nuts, T-bar, tightness of T-bar and bearings for wear and tear, and check for proper tightness. Always make sure to tighten all bolts and nuts before you ride. Eventually wheels, self-locking nuts and bearings wear and need replacement. The lives of these components depend on the kind of riding done. Lots of braking will wear out wheels, and riding in dirty or wet conditions will prematurely shorten bearing and fasteners life. Worn wheels and bearings are considered normal wear-and-tear and are not covered by the Nextsport Limited Warranty. Wheels other than genuine Fuzion wheels may not be compatible with your scooter. Always use genuine Fuzion replacement parts.

CLEANING YOUR SCOOTERWipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents as they may damage the surfaces. Do not use alcohol, alcohol-based or ammonia-based cleaners as they may damage or dissolve the plastic components or soften the decals or decal adhesive.

ALWAYS, BEFORE YOU RIDEWARNING: ALWAYS INSPECT SCOOTER PRIOR TO RIDING. Proper inspection and maintenance of your scooter can reduce the risk of injury. Check all fasteners before every ride. Always inspect your scooter before riding, and maintain it regularly. Replace worn or broken parts immediately. Adults must assist children in the assembly and initial adjustment procedure.

WARNING: REGARDING USE OF NON-NEXTSPORT PRODUCTS WITH YOUR FUZION SCOOTER. Your scooter has been built according to Nextsport’s design specifications. All the original equipment supplied at the time of sale was selected on the basis of compatibility with the frame, wheels, pivots, and all other parts. Certain after-market products may or may not be compatible with YOUR Fuzion scooter. Contact Nextsport’s customer service prior to modifying or replacing any component with a non-factory specified part.

WARNING: CHECK ALL LOCAL LAWS REGARDING SCOOTER USE. Check all local laws and regulations to see where and how you may use your Fuzion scooter legally. In many states and local areas, scooter riders are required BY LAW to wear a helmet. Check and obey local laws and regulations regarding helmet use and scooter operation in your area.

WARNING: REMEMBER TO ALWAYS WEAR PROTECTIVE GEAR. This includes but is not limited to helmet, elbow pads, and knee pads.

WE WANT TO HEAR FROM YOU

Visit us online at www.fuzionscooter.com for event information, product news, videos and much more! Follow Team Fuzion online and share your riding videos with us on Facebook and YouTube.

If purchased outside the United States, please contact the place of purchase for any assistance with this product and its components.

LIMITED WARRANTY

• Warranty ONLY applicable in the United States.

• Please fill out the information at http://fuzionscooter.com/warranty/ to complete warranty registration.

• This limited warranty is the only warranty for Fuzion scooters. There is no other express or implied warranty. The manufacturer warrants this product to be free of manufacturing defects for a period of six months from date of purchase. This limited warranty does not cover normal wear and tear, or any damage, failure, or loss caused by improper assembly, maintenance, storage, or use of the scooter. This limited warranty will be void if the product is ever: used in a manner other than for recreation or transportation, modified in any way, rented.

• Check local laws and regulations to see where you can ride your scooter legally. The manufacturer is not liable for incidental or consequential loss or damage due directly or indirectly from the use of this product. To obtain service under this warranty you must have purchased this product in the United States and, within the warranty period, contact Nextsport directly by phone at 510-550-8963 or email at [email protected]. Nextsport will provide warranty replacements at its sole discretion. Authorized warranty services ONLY available from Nextsport. Specifications are subject to change without notice.

www.facebook.com/fuzionscooter www.youtube.com/fuzionscooter

FUZION PRODUCTS ARE PROTECTED BY US AND INTERNATIONAL PATENTS AND TRADEMARKS.

Patent # 6520517

© Copyright 2014Nextsport, Inc.2340 Powell Street, Suite 198Emeryville, CA [email protected]

All rights reserved.

For assistance, [email protected]

if purchased in the united states,do not return product to store!

we want to help you directly!

BRAKE USE

3

Make sure that you have a firm grip on the handlebars and are traveling in a straight line. Slide one foot toward the back of the scooter.

With the heel of that foot, GRADUALLY apply pressure to the top of the brake mechanism. This will decrease your speed and eventually bring you to a stop.

HOW TO RIDE

FOOT PLACEMENT: Place your feet anywhere that is comfortable. Most people like a parallel stance with toes facing forward and feet slightly spread forward and back. Learn to kick with either foot on the deck, brake, and slide turns with either foot. Practice stepping on and off and walking alongside your Fuzion scooter. Learn to do this on both sides. Work up to running alongside then jumping on with both feet. Becoming skilled at stepping on and off without looking at the deck will help avoid and minimize small crashes.

TURNING YOUR SPORT: Your Fuzion Sport has independent control of front and rear steering. The front wheels steer the front of the Sport when the handle bars are turned, just like a car or bicycle. The back wheels turn the back of the Sport when the deck and handlebars are leaned (banked) from side to side, like a skateboard. By using different combinations of leaning and steering you will quickly be carving and sliding all kinds of turns. Start out on smooth, flat pavement away from traffic. Look forward and kick with either foot. Step on and coast forward. Repeat until you are comfortable kicking, stepping on and off, and coasting to stop. Initiate a turn by banking the deck and moving in the direction you want to turn. By relaxing your grip on the handlebars, your hands will naturally follow your head and eye movement. Start with wide smooth turns. Practice by making big circles and figure eights.

STOPPING TECHNIqUES: Controlling speed and stopping are basic riding skills that must be learned. You must learn to use the foot brake effectively in order to slow down and stop. Effective banking requires practiced technique, well-fitting shoes, and smooth clean pavement, as well as room to turn that is free of obstacles, pedestrians, and cars or other traffic. It is very dangerous to ride faster than your ability to turn, slow down, and stop. Please exercise good judgment, ride within your skill level, and remain safe.

STOPPING TECHNIqUES – USING THE BRAKE: The brake on your scooter should be your primary source of slowing down and stopping. In general, the brake should only be used while going in a straight line. It is important to learn to kick and use the brake with either foot. Start out on flat, smooth pavement and kick straight forward. While coasting forward, gradually apply pressure to the top of the brake with the heel of your foot closest to the brake. This will cause you to slow down and eventually come to a complete stop. Practice slowing down over long distances first, before attempting more abrupt stops. Avoid touching the rear wheels as this is unsafe and could cause unexpected and sudden stops. Harder braking requires progressively more pressure on the top of the brake.

WARNING: BRAKE MECHANISM WILL

GET HOT FROM CONTINUOUS USE.

DO NOT TOUCH AFTER BRAKING.

1

2

1

2

3

4

owner’s manualowner’s manualowner’s manual