CONTENTS OF A FORKLIFT DEALERSHIP & A FABRICATING COMPANYFeaturing: 10' x 1/2" Cap. Plate Roll; CNC Beam Drill; Ironworkers; Radial Drills; (60+) Welding Machines; Large Quantity Forklifts up to

52,000-Lb. Cap.; Unused Forklift Accessories; Unused Pallet Jacks; Power Tools; Much More!

Relocated For Convenience of Sale to Our

MARKET STREET STORAGE WAREHOUSE12989 Market Street Road

HOUSTON, TEXAS 77015(See Directions on Back Page)

AUCTION: TUESDAY, SEPTEMBER 29 • 10:00 A.M.INSPECTION

Monday, September 28, 9:00 A.M. to 4:00 P.M. & Morning of Sale

BUYER’S PREMIUM 15% ONSITE

18% WEBCAST

Read Partial Terms and Conditions on Back Page of Brochure

PEDDINGHAUS MDL. TDK1000/3DHD CNC BEAM DRILL PARTIAL VIEW OF WELDERS

AUCTION

On-Site Bidding in Houston, Texas or Bid Via Webcast at

Headquarters:1304 Langham Creek Drive, Suite 454

Houston, Texas 77084

FAX: (713) 672-7905PHONE: (713) 691-4401

E-MAIL: pmi@pmi-auction.comWEBSITE: www.pmi-auction.com

Ron Moore, Texas Lic. #7314

HOUSTON • DALLAS • ST. LOUIS

Sale Conducted By:

<(1 OF 5) HAULOTTE ELECTRIC SCISSOR TYPE MANLIFTS

<PEDDINGHAUS MDL. 110/140 HYDRAULIC IRONWORKER

>HYSTER

52,000-LB. CAP. DIESEL FORKLIFT W/COIL HANDLER

AND FORKS

AS NEW AS2012

2 2 PIRANHA 90 T. CAP. HYDRAULIC IRONWORKER

ROUNDO 10' X 1/2" PLATE BENDING ROLL

W.A. WHITNEY 45 T. CAP. ANGLE SHEAR

PEDDINGHAUS MDL. TDK1000/3DHD CNC BEAM DRILL

CUSTOM HYDRAUIC C-FRAME PUNCH

PEDDINGHAUS MDL. 110/140 HYDRAULIC IRONWORKER

PLATE BENDING ROLLROUNDO 10' X 1/2" MDL. PS255, new 1991, S/N 915112.

CNC BEAM DRILLPEDDINGHAUS MDL. TDK1000/3DHD, 3-spndl. cap., Fagor Control, (est.) 1986, S/N 475657-6986002.

HYDRAULIC ANGLE SHEARW.A. WHITNEY 45 T. CAP. MDL. 609-483, 10 HP (est.) hyd. unit, S/N 609-483-33284.

HYDRAULIC IRONWORKERSORIGINAL PEDDINGHAUS MDL. 110/140, 110 T. quick change punch station, plate, flat bed, round and angle shear, notcher, 20" throat depth, S/N 44236236560022.

METAL MUNCHER 100 T. CAP. MDL. MM100, 1-3/16" x 1" punching cap., flatbar shear, angle shear, coper, S/N 01310696.

PIRANHA 90 T. CAP., 6' x 6' x 5/8", 1-1/8" hole through and 1" cap., S/N P90-649.

MUBEA 88 T. CAP. MDL. HP800, 1-1/4" hole thru 13/16" steel plate, S/N 01533-80-000-637.

UNIVERSAL MECHANICAL IRONWORKERSUMMIT MDL. G16, punching 1-1/4" hole thru 3/16" steel plate, 5" plate shear, coping, bar square, angle, T’s beams, channels, round shears, S/N 01113.

HYDRAULIC C-FRAME PUNCHESCUSTOM, approx. 14" throat, suspended from 1 T. cap. jib, chain hoist, Fabriline hyd. unit, S/N N.A.

WHITNEY, approx. 18" throat, suspended from 1 T. cap. jib, chain hoist, Whitney hyd. unit, S/N 805-498.

WHITNEY 100 T. CAP., approx. 7" throat, hyd. unit, skid mtd.

AUCTION

33WHITNEY HYDRAULIC C-FRAME PUNCH

AMERICAN HOLE WIZARD 4' X 11" RADIAL ARM DRILL

CUSTOM ABRASIVE CHOP SAWS

W.F. WELLS 26" x 26" HORIZONTAL BANDSAW

R.K. MACHINERY 100 T. CAP. SHOP PRESS

W. F. WELLS HORIZONTAL BANDSAW

RADIAL ARM DRILLAMERICAN HOLE WIZARD @ APPROX. 4' X 11", spds.: 25–750 RPM, 26" x 33" T-slotted box tbl.

AMERICAN HOLE WIZARD @ APPROX. 4' X 11", spds.: 1,000 RPM, T-base, box tbl.

HORIZONTAL BANDSAWSW.F. WELLS COLUMN TYPE, 26" x 26" (est.) cap.

W.F. WELLS COLUMN TYPE, 18"W., S/N 5010.

COLD SAWSTRENNJAEGER MDL. ST251, 10" blade cap., rotating mitering positioner, pneu. vise and down feed, S/N F11195.

CUSTOM ABRASIVE CHOP SAWS (2 pair), mtd. on custom structural steel tbl., adj. along width of tbl., hand operated, L/R adj. (est.) 15 HP motors.

HEAVY DUTY FLOOR STANDING DRILLWESTERN MACHINE TOOL WORKS MDL. 4-12BM, 24" x 22" tilting T-slotted tbl.

UPRIGHT DRILL PRESSESKING AICO MDL. AICO-176F, #3 MT spndl., S/N 07078.

JET MDL. JDP-17MF, S/N N.A.

JET MDL. 420FSP, approx. 2 HP motor, S/N 24917.

SHOP PRESSR.K. MACHINERY 100 T. CAP., approx. 42" btn. side bars, fitted w/roller device for bar straightening.

WOOD CUTTING RADIAL ARM TABLE SAWSDELTA, approx. 12" blade.

CRAFTSMAN PROFESSIONAL, 16" arm travel, approx. 10" blade.

AUCTION: TUESDAY, SEPTEMBER 29 • 10:00 A.M.INSPECTION: Monday, September 28, 9:00 A.M. to 4:00 P.M. & Morning of Sale

On-Site Bidding in Houston, Texas

or Bid Via Webcast at

4

POWER & IDLER TANK TURNING ROLLS(2) POWER AND IDLER ROLL SETS.

POWER ROLLER, w/(2) idlers.

WELDING POSITIONERCUSTOM, pwr. tilt and elevation, 30" sq. faceplate, 3-jaw chuck.

PORTABLE WELDERMILLER BIG 50 DIESEL, constant current DC welding generator, trailer mtd., S/N KC264103.

WELDING MACHINES(3) MILLER DIMENSION 652–650 AMP POWER SOURCES, S/N KJ269511, S/N KH414029 w/Miller 24 v. constant spd. wire feeder, S/N KJ107136 w/Miller 60 Series wire feeder.

LINCOLN IDEALARC DC600–600 AMP ARC POWER SOURCE, S/N AC492385.

MILLER DELTAWELD 451–450 AMP POWER SOURCE, S/N KC258373.

MILLER DELTAWELD 450–450 AMP CONSTANT POTENTIAL POWER SOURCE, S/N JB4 97723.

MILLER GOLDSTAR 442–400 AMP POWER SOURCE, S/N KJ289478.

(2) MILLER CP302–300 AMP POWER SOURCES, S/N KJ156271, S/N KK033177.

MILLER CP300–300 AMP POWER SOURCE, S/N JB554385.

MILLER CP300E–300 AMP POWER SOURCE, S/N HD716410.

MILLER GOLDSTAR 300SS–300 AMP POWER SOURCE, S/N HK271472.

(3) LINCOLN IDEALARC 250–250 AMP POWER SOURCES, S/N AC392078, S/N AC2-44154, S/N AC436665.

(5) MILLER DIALARC 250 AC/DC–250 AMP POWER SOURCES, S/N MB380232V, S/N KF8-69824, S/N KF869838, S/N LH030031C, S/N KJ14139.

MILLER MILLERMATIC 250 CV/DC–250 AMP POWER SOURCE, S/N KC273605.

MORE THAN (70+) ADD’L. PALLETS OF WELDERS.

PLASMA CUTTING SYSTEMTHERMALARC PAK10XR PLASMA CUTTING SYSTEM.

MILLER BIG 50 DIESEL PORTABLE WELDER

<(4) CLEMTEX SANDBLAST POTS

PARTIAL VIEW OF WELDERSPOWER AND IDLER TANK TURNING ROLLS

>PAC STRAPPING PRODUCTS, INC.

IMPACT STRAPPER AND

STRAPPING MATERIAL

CUSTOM WELDING POSITIONER

On-Site Bidding in Houston, Texas or Bid Via Webcast at

5

<MAGNETIC BASE DRILLS

>PARTIAL VIEW OF LARGE QUANTITY

OF GRINDERS

IPM MACHINERY 20/20 SERIES PALLET SHRINK WRAPPER

ATLAS COPCO MDL. XAS90 PORTABLE AIR COMPRESSOR

RIDGID PIPE THREADER

VIEW OF AIR COMPRESSORS

PIPE THREADERRIDGID PIPE THREADER, Mdl. 850, 4" cap.

WELDING ACCESSORIESASSORTED WIRE FEEDERS; WELDING ACCESSORIES PRESENTLY IN STORAGE ON PALLETS AND PALLET RACKS–PLEASE INSPECT AT AUCTION SITE!

PALLET SHRINK WRAPPERIPM MACHINERY 20/20 SERIES, pwr. elevator, approx. 60" dia. pwr. rotary tbl., (est.) 7' pallet ht.

IMPACT STRAPPERPAC STRAPPING PRODUCTS INC., tbl. type, utilizing vinyl strapping material.

SANDBLAST POTS(4) CLEMTEX, assorted sizes.

PORTABLE AIR COMPRESSORATLAS COPCO MDL. XAS90, 185 CFM cap., trailer mtd.

RECIPROCATING TYPE AIR COMPRESSORS

CUSTOM MDL. 850, 7-1/2 HP motor, mtd. on 60 gal. (est.) horiz. receiving tank, S/N 871.

QUINCY MDL. F325-15, 5 HP motor, mtd. on 100 gal. (est.) horiz. receiving tank, S/N 181481-L-NB.322676.

ROGERS MACHINE CO. MDL. 32518 3 HP MOTOR, mtd. on 60 gal. (est.) horiz. receiving tank, S/N 274632L.

MISCELLANEOUS SHOP & WAREHOUSE EQUIPMENTZEKS NC SERIES NON-CYCLING AIR DRYER; BANDING MATERIAL; CABINETS; SHELVING UNITS; C-CLAMPS; CHAIN COME-ALONGS; HUGE ASSORTMENT OF ROLLER CONVEYOR; LARGE ASSORT-MENT OF HAND TOOLS, POWER TOOLS AND ELECTRIC HAND TOOLS; GRINDERS; ELECTRICAL SUPPLIES; HOSE; MISC. WORKSTANDS; MAGNETIC BASE DRILLS; PALLET RACK; PAINT POTS; PLATE DOGS; STEEL CABLE; FASTENERS; MUCH MUCH MORE!

OFFICE FURNITURE & EQUIPMENTDESKS; CREDENZAS; CHAIRS; ROLLER DRAWER DRAWING CABINETS; FILING CABINETS.

AUCTIONRelocated For Convenience of Sale to Our

MARKET STREET STORAGE WAREHOUSE12989 Market Street Road

HOUSTON, TEXAS 77015(See Directions on Back Page)

AUCTION: TUESDAY, SEPTEMBER 29 • 10:00 A.M.

INSPECTION Monday

September 28

9:00 A.M.

to 4:00 P.M. &

Morning of Sale

BUYER’S PREMIUM 15% ONSITE

18% WEBCAST

6 6 UNUSED ROLL CLAMP ATTACHMENT FOR FORKLIFT UNUSED BOX CLAMP ATTACHMENT FOR FORKLIFT

DOOSAN DAEWOO 30,400-LB. DIESEL FORKLIFT

HYSTER 52,000-LB. CAP. DIESEL FORKLIFT W/COIL HANDLER AND FORKS

UNUSED BARREL CLAMP FOR FORKLIFT

VIEW OF FORKLIFTS

FORKLIFTSHYSTER 52,000-LB. CAP. MDL. CHALLENGER 520, diesel engine, sgl. stage mast, rough terrain tires, dual on front, lifting bale mtd. on front, forks, side shift, S/N N.A.

DOOSAN DAEWOO 30,400-LB. MDL. D150, diesel engine, 2-stage mast, 138" lift ht., 93" forks, rough terrain tires, dual on front, side shift, S/N F3-00127.

(2) DAEWOO AMERICA 15,500-LB. CAP., MDL. D70S-2, Type D, diesel engine, sgl. stage mast, 177" lift ht., 96" forks, pneu. tires, dual on front, side shift, S/N SBFX0003 , S/N FX00105.

HYSTER 8,800-LB. CAP. MDL. 1180XL, 3-stage mast, 172" lift ht., dual front tires, S/N GD05D13930W.

MITSUBISHI 6,000-LB. CAP. MDL. FGC30N-LP, new 2007, 3-stage mast, 186" lift ht., 48" forks, standard treat tires, S/N AF83F10365.

MITSUBISHI 6,000-LB. CAP. MDL. FGC30N-LP, new 2007, LP gas engine, 3-stage mast, 189" lift ht., 41" forks, cushion tires, S/N AF83F10346.

MITSUBISHI 5,000-LB. CAP. MDL. FGC25N1, new 2007, 3-stage mast, 187" lift ht., 60' forks, cushion tires, S/N AF82F10311.

NISSAN 5,000-LB. CAP. MDL. MCPL02A25LS, new 2006, 187" lift ht., 41" forks, standard tread tires, side shift, Chassis No. CPL02-9P3377.

NISSAN 5,000-LB. CAP. MDL. MCPL02A25LS, new 2006, LP gas engine, 3-stage mast, 187" lift ht., standard tread tires, side shift, Chassis No. CPL02-9P6506.

MITSUBISHI 5,000-LB. CAP. MDL. FGC25N, new 2005, LP gas engine, 3-stage mast, 188" lift ht., 41" forks, cushion tires, S/N AF82F01811.

MITSUBISHI 5,000-LB. CAP. MDL. FGC25N, new 2004, 3-stage mast, 187" lift ht., 48" forks, cushion tires, S/N AF82F00015.

YALE 5,000-LB. CAP. MDL. GLC050TGNUAE092, new 2003, LP gas engine, 3-stage mast, 171" lift ht., 53" forks, cushion tires, side shift, S/N E187V08076V.

MITSUBISHI 5,000-LB. CAP. MDL. 42-6FGOU25, LP gas engine, 3-stage mast, 41" forks, S/N 76179.

TOYOTA 5,000-LB. CAP. (est.), LP gas engine, 3-stage mast, 182" lift ht., no forks.

MITSUBISHI 5,000-LB. CAP. MDL. FGC25N1, LP gas engine, 188" lift ht., cushion solid tires, S/N AF82F10309.

MITSUBISHI 5,000-LB. CAP. MDL. EG25K, LP gas engine, 3-stage mast, 188" lift ht., 41" forks, side shift, S/N AF17C00826.

MITSUBISHI 4,000-LB. CAP. MDL. FG20N, new 2006, LP gas engine, 188" lift ht., 41" forks, pneu. tires, S/N AF17D02226.

AUCTION: TUES. SEPT. 29 • 10:00 A.M.

AS NEW AS

2007

77

HYSTER 8,000-LB. CAP. ELECTRIC FORKLIFT

(1 OF 5) HAULOTTE ELECTRIC SCISSOR TYPE MANLIFTS

UNUSED FORKS CLUB CAR MDL. XRT1550 GASOLINE ATV

CROWN ELECTRIC WALK-BEHIND PALLET JACK

HYSTER 4,000-LB. CAP. MDL. S40XMS, new 2004, LP gas engine, 3-stage mast, 165" lift ht., 42" forks, cushion tires, S/N D010H03496B.

HYSTER 4,000-LB. CAP., MDL.H40XM, diesel engine, 3-stage mast, 153" lift ht., side shift, (no forks), S/N D177G2318R.

MITSUBISHI 3,000-LB. CAP. MDL. FGC15K, new 2004, LP gas engine, 3-stage mast, 188" lift ht., 42" forks, side shift, cushion tires, S/N AF81E00456.

ELECTRIC FORKLIFTSHYSTER, 8000-LB. CAP. MDL. E80Z, new 2007, 190" lift ht., S/N E098N01558E.

CROWN TYPE E, 3000-LB. CAP. MDL. 3020-20, new 2005, 190" lift ht., mast vert., S/N 2001A279787.

ELECTRIC WALK-BEHIND PALLET JACKSCROWN 4,500-LB. CAP. MDL. WP2335-45, new 2008, S/N 5A355805.

YALE, 4000-LB. CAP. MDL. MPB040ACN24C2748.

TOYOTA, 4000-LB. CAP. MDL. 6HBW20, new 2005.

C.E. ELECTRIC PALLET TRUCK 2,200-LB. CAP. MDL. SET22, 200mm max. lift, S/N 107881.

ELECTRIC SCISSOR TYPE MANLIFTS(5) HAULOTTE MDL. COMPACT 2747E, new 2012 and 2011, approx. 46" x 90" extendable work platform w/operator’s control, S/N CE146283 (2011) (Asset No. 20975A), S/N CE148774 (2012), S/N CE148735 (2012), S/N CE146287 (2011) (Asset No. 209075B), S/N CE146226 (2011) (Asset No. 20975C).

HAULOTTE MDL. COMPACT3347E, new 2012, 32'-1" lift ht., 47" X 91" platform, 36" platform ext., 3' platform reach, S/N CE148862, Asset No. 215248C.

(2) JLG 500-LB. CAP. MDL. 1932E2, approx. 30" x 68" extendable work platform, operator’s control, S/N N.A.

SINGLE BASKET MANLIFTHAULOTTE 400-LB. CAP. MAST TYPE STAR13P, new 2012, approx. 24" x 27" platform w/opera-tor’s control, S/N ME110183.

ALL-TERRAIN VEHICLECLUB CAR MDL. XRT1550, gasoline engine, 4-wheel drive.

MATERIAL HANDLING EQUIPMENTAPPROX. (40) NEW AND UNUSED HAND TYPE PALLET JACKS; HUGE ASSORTMENT NEW AND UNUSED STEEL FORKLIFT FORKS RANGING IN SIZES FROM APPROX. 42"L. TO 96"L., SIDE SHIFTING BRACKETS; VARIOUS GRABBING AND LIFTING ACCESSORIES W/FORKLIFT; HAND TRUCKS.

<CROWN 3,000-LB. CAP. ELECTRIC FORKLIFT

>UNUSED

PALLET JACKS

Relocated For Convenience

of Sale to Our

MARKET STREET STORAGE

WAREHOUSE12989 Market Street Rd.HOUSTON, TEXAS

77015(See Directions on Back Page)

BUYER’S PREMIUM:

15% ONSITE 18% WEBCAST

2007

2005

AS NEW AS2012

2008

QS-0028114

P.O. Box 19100Houston, TX 77224-9100

DATED MATERIAL – PLEASE DELIVER

CONTENTS OF A FORKLIFT DEALERSHIP

& A FABRICATING COMPANY

Featuring: 10' x 1/2" Cap. Plate Roll; CNC

Beam Drill; Ironworkers; Radial Drills;

(60+) Welding Machines; Large Quantity

Forklifts up to 52,000-Lb. Cap.; Unused

Forklift Accessories; Unused Pallet Jacks;

Power Tools; Much More!

HOUSTON, TEXAS

AUCTION

PUBLIC INVITEDAUCTION: TUES., SEPT. 29 • 10:00 A.M.

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 17

ATTENTION: PLANT MANAGEROR EQUIPMENT BUYER

ASSOCIATION OFMACHINERY AND

EQUIPMENT APPRAISERS

A 15% Buyer’s Premium Will Apply On-site. An 18% Buyer’s Premium Will Apply to Webcast Bids. See Above Rules for Participation.

Everything will be sold to the highest bidder or bidders for cash in accordance with the auctioneer’s Customary Terms of Sale, copies of which will be posted on the premises.

ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE TRANSFER OR COMPANY CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC.

Here is an example of what your letter should be: Mr. “Customer Name” is a customer of this bank. This bank will guarantee unqualified payment to PMI on the account listed herein up to the amount of $___________. This letter is good until October 29, 2015.

In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. All items must be removed by the time announced at the start of the sale.

Lots not paid for and/or removed within the time allowed may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charge of resale, will be charged to the defaulting purchaser.

The buyer acknowledges that he or an agent has inspected all of the assets upon which he will be bidding and/or does purchase.

Buyer agrees to accept assets purchased “AS IS,” WITH “ALL FAULTS” AND “WITH REMOVAL AT BUYER’S RISK AND EXPENSE.” THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE PART

OF THE AUCTIONEER AS AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER.

The buyer does hereby assume and does agree to indemnify and hold the auctioneer harmless from any future claim which shall pertain to the fitness or use of that asset as being purchased. Riggers, movers, electricians and buyers performing work at the Auction Site must provide PMI with evidence of insurance. The insurance coverage must be at a level acceptable to PMI and to the seller. PMI reserves the right to withdraw items, alter the order of the sale, accept bids from the seller, and group lots as it may deem appropriate. This auction may include consignment items.

Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the infor-mation herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact auctioneer prior to attendance.

These terms and conditions may be modified or supplemented by language in the catalog avail-able at the sale site or by announcement at the start of the sale. Bidders should be attentive to those announcements and to the catalog language.

PARTIAL TERMS & CONDITIONS

UNABLE TO ATTEND?Bid on-line in real time atTO PARTICIPATE YOU MUST:1. Register at www.BidSpotter.com. Use the link to

BidSpotter on PMI’s website calendar. DO IT NOW.2. Either send wire transfer, or, overnight delivery service a

cashier’s check deposit in the amount of $3,000 (U.S. Bidders) or $10,000 (Foreign Bidders) to: Plant & Machinery Inc. 1304 Langham Creek Drive, Suite 454, Houston, TX 77084 Wire transfer instructions can be found at pmi-auction.com

You must be registered and have your deposit in the hands of Plant & Machinery, Inc. at least 24 hours prior to the start of the auction. Failure to register and/or failure to send your deposit to Plant & Machinery, Inc. may disqualify you from bidding. DON’T WAIT.If you need assistance, don’t hesitate to call (713) 691-4401.ALL WEBCAST BIDS ARE SUBJECT TO AN 18% BUYER’S PREMIUM.

DIRECTIONSFROM GEORGE BUSH INTERCONTINENTAL AIRPORT: Exit airport using John F. Kennedy Blvd. Merge onto Beltway 8/TX-8 E on the left towards US 59. Exit onto US 59 south towards downtown. Exit onto Loop 610-East traveling clockwise around the city to the east side where it intersects I-10. Exit onto I-10 East towards Beaumont. Take the exit for Federal Rd. a short distance ahead, and turn right (south) onto Federal. Proceed to the next light at Market St. Turn left (east) onto Market St. and proceed ahead to auction site on your left. Watch for auction signs.

LODGINGLA QUINTA INN & SUITES ...............................................(713) 451-0009930 Normandy Street, Houston, Texas 77015

COMFORT INN EAST ...................................................... (713) 455-88881016 Maxey Road, Houston, Texas 77015

FINANCE YOUR AUCTION

PURCHASEConserve Your Cash &

Increase Your Bidding Power

AuctionLea$e Provides M&E Financing

With Approvals from $5,000 to $999,000

(800) 438-1470

Apply Online:www.AuctionLease.com