continuous vibration monitoring system
TRANSCRIPT
Continuous Vibration Monitoring System
GEA VTrac
Minimize Unplanned Equipment Shutdowns
To minimize equipment downtime and reduce
costly compressor rebuilds, GEA offers the VTrac
continuous vibration monitoring system for industrial
refrigeration and gas compression packages.
The GEA VTrac system consists of two vibration sensors
(accelerometers) on the compressor and two on the motor
(pictured at right). The accelerometers are wired to a compact
plug-in module located in the control panel. These sensors
not only monitor the bearings, but they also monitor the
motor rotor bars and detect unbalance and 2x line frequency
problems. The GEA VTrac is a fully integrated solution when
used with GEA Omni control panels and is adaptable to other
control panels and equipment. To explore the benefits of GEA
VTrac, please contact your local GEA sales professional.
2019
_07_
NA
M_M
KT_
UT_
VTR
AC
_EN
©
GEA
. All
right
s re
serv
ed. S
ubje
ct t
o m
odifi
catio
ns. P
rinte
d in
the
Uni
ted
Stat
es.
GEA North America
GEA Systems North America LLC +1 717 767 6411 [email protected]
3475 Board Road gea.com/industrialrefrigeration
York, PA 17406
Key Features of the GEA VTrac System
When Integrated with the
GEA Omni Control Panel
• Continuously trends vibration amplitudes.
• Relative vibration levels are historically trended and accessible via communications.
• “Damage View” displays the relative vibration level in an easily understood bar graph (pictured at right).
• Switching to “Spectrum View” displays the full vibration spectrum with fault frequencies.
• “Warning” and “Damage” levels are annunciated. The “Damage” level can be configured to automatically shut down the compressor.