2016/2017ACOUSTICS CONTRACT

Company: Aural-Aid Pte. Ltd. Contact: +65 6635 7638 Website: www.auralaid.com E-mail: hello@auralaid.comRegistration No. : 201306106M Address: Oxley BizHub 1, 65 Ubi Road 1, #04-36, Singapore 408729

51

01 02 03 04

05 06 07 08

09 10 11 12

PAGES

FABRIX

FABRIX is a fabric system that uses proprietary plastic tracks to construct acoustic panels. Our fabric system utilizes unplasticized polyvinyl chloride tracks as the backbone of the fabric panels. The tracks hold the fabric and the sound absorbing substrate (such as

high-density fibreglass or mineral wool) in place.

Specifications:1. Profile: Front Load, Front Load (Low-leg)2. Material: Unplasticized Polyvinyl Chloride3. Standard Dimension: 30mmH x 35mmW x 2000mmL4. Standard Thickness: 2mm5. Eco-Friendly Test: EN 1122:20016. Fire-Rated Test: ASTM E84 Class A

Many acoustic panel designs and patterns can be achieved with FABRIX. The tracks can be curved and cut to size to work with

walls, ceilings, and pillars. 3D shapes and patterns can also be implemented with our fabric system. FABRIX is tested to be

eco-friendly and suitable for most building fire code.

1

Tuck in fabric with putty knife or fabric rollerInstall fiberglass wool onto the wallAir nail or screw tracks onto wall

2

TOP LOAD (LOW LEG)

TOP LOAD (TAPERED)

321

C) Installation System1. Top Load (Low Leg) is used as perimeter track2. Top Load (Tapered) is used as middle track

B) Installation1. Mark out placement of acoustic panels, and take into consideration positions for M&E.2. Cut tracks to size according to marked out panel positions.3. Install tracks with construction adhesive, and screws or nails.4. Install acoustic substrate as infill.5. Cut fabric to panel size with 25 mm excess on each side.6. Tuck fabric into jaws of track ensuring surface is taut and even.

A) Preparation

1. Calculate amount of tracks required.2. Use Top Load (Low Leg) for perimeter tracks and Top Load (Tapered) for middle tracks.3. Place of installation must be dry.4. Humidity level should be kept between 40% to 60%.5. Use a lint roller to clean the fabric for maintenance.

INSTALLATION:

35.00

23.50

30.002.16

R0.76

R1.59

0.76

45.00°16.80°

5.00°

35.00

30.00

R0.76

20.00

2.16 0.76

5.00°

45.00°

9.00°

R1.59

FABRIX

3

Pattern 28-4Pattern 14-2Pattern 13-3

Specifications

1. Structure: Base Material, Finishing & Fleece2. Material: E1 MDF, FR MDF, MgO Composite Board, etc.3. Finishing: Paint, Melamine, PP, Veneer, etc.4. Standard Dimension: 2440*192mm, 2440*128mm5. Standard Thickness: 12mm, 15mm,18mm6. Standard Pattern: 13-3,14-2, 28-4, 59-57. Eco-Friendly Test: EN 13986, E18. Fire-Rated Test: ASTM E84-12a Class A, BS476 [Part 7] Class 1

OSSB

Fireproof MDF

Normal MDF

E1 Ecofriendly MDF

Black MDF

5-layer Composite panel

3-layer Composite panel

Our wooden grooved acoustic panel is made up of a series of slats and grooves. Each panel has a machined tongue and groove joint for a seamless joinery. TIMBERIX wooden grooved panels come in 4 different patterns: 13-3, 14-2, 28-4, 59-5. The first number refers to the slat size (mm) and and second number refers to the groove size (mm). The surface comes in 4 types of finishing: paint, melamine, PP, and veneer. The base material can be made of MDF, fire-resistant MDF, eco-friendly MDF, black MDF, 3-layer composite, 5-layer composite or OSB.

TIMBERIX wooden grooved panels reduce echoes by trapping and diffracting sound in the grooves and perforation found on the surface. The sound that passes through the perforation is

further absorbed by an acoustic substrate such as fibreglass or mineral wool, which reduces reverberation in the room. Smaller

grooves are better at attenuating high frequency sounds, whereas larger grooves are better at controlling low frequency

sounds.

TIMBERIXWOODEN GROOVED PANEL

4

Wooden Batten

AA01

AA01

AA02

AA02

Installation: Steel Keel SystemCross-section Structure

Wooden Batten

AA03

AA03AA03AA01

AA02

AA02

Sound Absorption Wool

Wooden Grooved Acoustic Panel

AA03

Dist

ance

< 6

00m

m

Sound Absorption WoolDistance < 600mm

6. Install another line of panels5. Start to install panels4. Fix AA02 and AA03 clips in a line

3. Use sound absorption wool as padding2. Fix AA01 keel on wooden battens1. Installation accessories

C) Installation System1. Steel keel system2. Wooden batten system

B) Installation1. Mark out placement of TIMBERIXpanels, and take into account M&E positions.2. Cut panels to size according to final positions.3. Decide on type of installation system to use.4. Install acoustic substrate of choice.5. Join TIMBERIX wooden grooved panels from top-to-bottom, and left-to-right.6. For wood laminate and veneer finishes, ensure that wooden grooved panels are installed with matching grain directions.7. Clean surface of the TIMBERIX panels with compressed air and gently wipe with dry cloth.

A) Preparation

1. Place of installation must be dry, with temperature no less than 10 degrees Celsius.2. Humidity level should be kept between 40% to 60%.3. TIMBERIX panels must be placed on site for at least 48 hours in order to adapt to the environmental conditions.4. Distance between each wooden batten should be less than 500mm, and that between each steel keel should be no more than 600mm.

INSTALLATION:TIMBERIX

WOODEN GROOVED PANEL

Our wooden perforated acoustic panel is made up of a series of perforations. Each panel has a machined groove joint for either a seamless or gap joinery. TIMBERIX wooden grooved panels come in 8 standard patterns: E4/4/1, E8/8/1, E16/16/3, E16/16/6, E32/32/6, V16/16/6, V32/32/6, and V32/32/8. The first alphabet refers to the hole arrangement (E is linear and V is staggered), the second pair of numbers refer to the distance between the two holes, and the last number refers to the hole diameter. The surface comes in 4 types of finishing: paint, melamine, PP, and veneer. The base material can be made of MDF, fire-resistant MDF, eco-friendly MDF, black MDF, 3-layer composite, 5-layer composite or OSB.

TIMBERIX wooden perforated panels is made with a 2-layer perforation structure, which traps and diffracts sound in the

holes. The sound that passes through the perforation is further absorbed by an acoustic substrate such as fibreglass or mineral wool, which reduces reverberation in the room. The perforation

comes in many sizes ranging from 1mm to 25mm. Smaller holes are better at attenuating low frequency sounds, whereas larger

holes are better at reducing high frequency sounds.

Specifications

1. Structure: Basic Material, Finishing & Fleece2. Material: E1 MDF, FR MDF, MgO Composite, etc.3. Front Surface: Melamine, PP, Wood Veneer, Paint, etc.4. Standard Dimension: 600mm x 600mm, 600mm x 1200mm, 1200mm x 1200mm, 1200mm x 2400mm5. Standard Thickness: 12mm, 15mm, 18mm6. Distances of Two Holes: 8/8mm, 16/16mm and 32/32mm7. Diameter of Holes: 1, 2, 3, 4, 5, 6, 8,10, 12mm, etc.8. Standard Patterns: 8/8/1, 16/16/3, 16/16/6, 32/32/6, 32/32/8, etc.9. Hole Arrangement: Linear (E), Staggered (V)10. Eco-Friendly Test: EN 13986, E111. Fire-Rated Test: ASTM E84-12a Class A, BS476 [Part 7] Class 1

TIMBERIXWOODEN PERFORATED PANEL

5

6

8mm

Pattern:8-8-1 Micro Holes

8mm

Pattern: 16-16-6

Cross-section Structure

Cross-section Structure

AA04AA05

Wood StripAA04AA05

321

321

Installation System II (without gap)

Installation System I (with gap)

C) Installation SystemWooden panels expand and contract with changes in humidity and temperature. We strongly recommend using Installation System I (with gap) to prevent buckling of panels.A) Preparation

B) Installation

1. Place of installation must be dry, with temperature no less than 10 degrees Celsius.2. Humidity level should be kept between 40% to 60%.3. TIMBERIX panels must be placed on site for at least 48 hours in order to adapt to environmental conditions.

1. Mark out placement of TIMBERIX panels, and take into account M&E positions.2. Decide on type of installation system to use.3. Install acoustic substrate of choice.4. For wood laminate and veneer finishes, ensure that panels are installed with matching grain directions.5. Clean surface of the TIMBERIX panels with compressed air and gently wipe with dry cloth.

TIMBERIXWOODEN PERFORATED PANEL

INSTALLATION:

7

WOOLYX wood fibres are sound absorbent, and the cement matrix has high moisture diffusion

and air permeability. This allows the wood wool panel to even out the relative humidity (RH) in

the environment.

WOOLYX wood wool panels are made from recyclable wood fibres, cement, and water. It is environmentally friendly and form-aldehyde free. The wood wool panels absorb sounds and gives aesthetics and environmental friendliness in an acoustic environ-

ment.

Specifications:

1. Material: Recyclable wood fibres in cement matrix2. Standard Dimension: 300 x 300mm, 600 x 600mm3. Standard Thickness: 25mm, 50mm4. Eco-Friendly Test: EN 13986, E15. Fire-Rated Test: ASTM E84-12a Class A, DIN EN 13501 B-s1,d0

WOOLYX

POLYX Baffles are acoustic panels hang vertically on the ceiling to absorb echoes. Our polyester baffles come in a basic black and white polyester wool finish, or a luxurious coloured felt finish. We recommend hanging each POLYX baffle approximately 300mm away from one another for good sound absorption.

POLYX Polyester Board is made by a process of tumbling, needle-punching, and baking low and high melting-point

polyester fibres. The high-density fibrous network absorbs sounds and reduces reverberation. POLYX Polyester Felt is

made with only high melting-point polyester fibres, which gives a softer touch and a vibrant colour. The Polyester Felt can be

laminated on top of the Polyester Board.

Specifications:

1. Material: Polyester Wool, Polyester Board, Polyester Felt2. Standard Dimension: 2440mmW (Polyester Felt & Polyester Board), 1220mm x 2440mm (Polyester Wool), 600mm x 1200mm (Polyester Baffle)3. Standard Thickness: 25mm, 50mm (Polyester Wool), 3mm, 9mm, 18mm (Polyester Board), 3mm (Polyester Felt)4. Eco-Friendly Test: Oeko-Tex® Standard 1005. Fire-Rated Test: EN 13501-1 Class B, Smoke Classification S1, Flaming Droplet Classification d06. Acoustics Test: ISO 354-2003 NRC = 0.3 - 0.75

POLYESTER BAFFLE

POLYX

8

9

Specifications:

1. Material: Polyester Board, Polyester Felt2. Standard Dimension: 250mm x 250mm x 60mm (Size A), 500mm x 500mm x 60mm (Size B), 400mm x 600mm x 45mm (Size C) , 540mm x 900mm x 45mm (Size D), 600mm x 600mm x 74mm (Size E)3. Eco-Friendly Test: Oeko-Tex® Standard 1004. Fire-Rated Test: EN 13501-1 Class B, Smoke Classification S1, Flaming Droplet Classification d05. Acoustics Test: ISO 354-2003 NRC = 0.3 For more information, refer to our CUBIX catalogue.

CUBIX is a modular acoustic panel that can be assembled together to make a feature wall. The panel is made with eco-friendly polyester and felt.

CUBIX

10

Pyramid FoamPyramid shape has the most surface area for absorption of mid-high frequencies. The pyramid profile comes in 25mmL x 25mmW x 25mmH and 50mmL x 50mmW x 50mmH dimensions. The total thickness is 35mm and 60mm respectively (inclusive of 10mm base).

Wedge FoamWedge shape has increased surface area for absorption of mid-high frequencies. The wedge profile comes in 25mmL x 25mmH and 25mmL x 50mmH dimensions. The total thickness is 35mm and 60mm respectively (inclusive of 10mm base).

Flat FoamFlat shape provides basic sound absorption for low-high frequencies. Available in thickness of 25mm, 50mm, and 100mm.

Specifications:1. Profile: Flat, Wedge, Pyramid2. Material: Polyurethane Foam, Melamine Foam3. Standard Dimension: 600mm x 600mm, 1200mm x 1200m4. Standard Thickness: 25mm, 35mm, 50mm, 60mm, 100mm5. Density: 25km/m3, 40kg/m36. Eco-Friendly Test: Oeko-Tex® Standard 1007. Fire-Rated Test: ASTM E84-12a Class A8. Acoustics Test: ASTM C423-90a and E795-92 NRC = 0.5 - 1.0

ABSORBEX is our range of polyurethane and melamine acoustic foam. The fire-rated foam density is engineered based on airflow resistivity data.

Sound absorption coefficient graph of ABSORBEX polyurethane acoustic foam based on ASTM C423-90a of 2” thick profiles.

ABSORBEX

315 400 500

Frequency/Hz

2” Flat Foam 2” Wedge Foam 2” Pyramid Foam

630 800 1000 1250 1600 2000 2500 3150 4000 5000250200160125100

Soun

d Ab

sorp

tion

Coe

ffici

ent

0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1.0

1.1

1.2

1.3

11

Acoustic glue dampens vibration due to the viscoelastic nature of the glue. The compound’s unique properties act

as a damping material to dissipate the vibrations caused by sound waves as they travel through ceilings, walls and floors.

Green Glue Noiseproofing Compound is non-hazardous, environmentally-responsible, and has practically no odour.

Soundproofing or technically, sound isolation, can be achieved by decoupling structures, dampening vibrations, and adding

mass. A RWAR “Room Within A Room” construction is the best method to isolate any sounds.

High-density fibreglass wool absorbs noises through particle velocity attenuation. The sound waves are converted to heat

energy when they pass through the microfibres of the glass wool substrate. Fibreglass wool is made from melting glass at a high temperature and spinning the molten glass at a high speed to

form glass fibres. The process is similar to how cotton candy is made.

SOUNDPROOFING

12

WOOD SWATCHFABRIC SWATCH

56555453525252

42414039383736

35343332313029

28272625242322

21201918171615

14131211100908

07060504030201

494846 47454443

56555453525252

42414039383736

35343332313029

28272625242322

21201918171615

14131211100908

07060504030201

494846 47454443

13

FLOCKING SWATCHFOAM SWATCH

8765

4321

1. Yellow5. Mandarin

2. Cyan6.Burgandy

3. Purple7. Grey

4. Black8. Charcoal

SW: Fire-rated flocking

N: Normal flocking

Pantone colours upon request

SW-17A N-17

SW-10 N-15

SW-20A N-20A

SW-28 N-29 SW-13N-5

SW-17 N-23

SW-2 N-2SW-30 N-30 SW-3 N-6

14

FELT SWATCHPOLYESTER SWATCH

2019181716

1514131211

1009080706

0504030201

26

29

36

3433

4241

20

3231

16

24

21

14

39

3530

37

01

17

23

51

22 25

19

04 07

27

38

43 44 45

40

28

06

13

15 18

050302

08 1009 11 12