control info products guide - plccenter.cn · years of experience in manufacturing control...
TRANSCRIPT
reducing your total cost of investment. We offer more than 100
years of experience in manufacturing control solutions.
Rockwell Automation Integrated Architecture provides seamless
integration of control, communication, and visualization across
multiple platforms – process, motion, drives, and sequential –
throughout your facility. We offer LogixTM Platforms and I/O
systems for control, NetLinxTM architecture, and ViewAnyWareTM
for visualization. Our PLC-5®, SLCTM 500, and MicroLogixTM
controllers, along with a wide range of world-class control
components, make your operation a model of pure efficiency,
shop floor to top floor.
This is a guide to key Allen-Bradley® and Rockwell SoftwareTM
control and information products. For additional information,
visit our Web site: www.rockwellautomation.com or
www.ab.com.
Every day you face a new challenge. On the plant floor, it’s
producing consistent quality faster. Reducing parts inventories.
Spending less time on training and less money on maintenance.
On the top floor, it’s faster time to market. More flexible
production. Zero defects.
Automation is a tool to help you meet your challenges.
At Rockwell Automation, our challenge is to make that tool more
efficient for you. Rockwell Automation Complete AutomationTM is
the answer to increasing your productivity and flexibility, while
Everything YouNeed To AchieveReal-Time Plant-Wide Control.
2 3
CommunicationsBuild Your Networks On A Simple HumanConcept. Sharing.
NetLinxTM Open Network Architecture
EtherNet/IPControl, configure, and collect data on standard
Ethernet TCP/IP using CIP (Control and Information Protocol)
to provide services for automation applications
• Based on NetLinx open network architecture and can seamlessly
communicate with any NetLinx-based network
• High-speed (10/100 Mbps) commercially based network
• Capable of transferring large files of data as well as short
messages
• Open, supported by ODVA, ControlNet International, IAONA, and
Industrial Ethernet Association
• Products are available or under development from more than 60
suppliers including Rockwell Automation
ControlNet TM
Control, configure, and collect data on a single network
designed specifically for automation applications using
CIP (Control and Information Protocol)
• Based on NetLinx open network architecture and can
seamlessly communicate with any NetLinx-based network
• 5 Mbps network designed for industrial automation applications
that require precise timing, repeatability, and redundancy
• Open, supported by ControlNet International, CENELEC, and
IEC standards
• Products available from more than 50 global suppliers
including Rockwell Automation
DeviceNet TM
Control, configure, and collect data on a CAN-based
network incorporating CIP (Control and Information
Protocol), which provides the key features for simple
industrial automation applications
• Based on NetLinx open network architecture and can
seamlessly communicate with any NetLinx-based network
• Supports speeds up to 500 Kbps. Designed to cost-effectively
provide communications for simple devices such as sensors,
valves, drives, motor starters, and operator interface stations
• Open, supported by ODVA, CENELEC, and IEC standards
• Thousands of products available from more than 400 global
suppliers including Rockwell Automation
4 5
Established Networks
Universal Remote I/OControl I/O and intelligent devices from a controller via this
simple network
• Installed globally in a huge variety of applications
• Considered the de facto standard, and when combined with
Data Highway, together they are the most widely used
automation networks in the world
• Operates at 57.6, 115.2, and 230.4 Kbps. Controller manages
network communications and scans other devices on the
network
• Allen-Bradley owns and manages the technology that is
licensed to other companies to provide a complete system
offering
• More than 2 million nodes have been installed and represent
a wide range of products and suppliers including Rockwell
Automation
Data Highway PlusTM
Configure and collect data on this simple peer-to-peer
network
• Used to link multiple RIO networks and/or controllers/chassis to
create a plant-wide data-sharing automation system
• Installed globally in a huge variety of applications
• Used with RIO to provide the de facto standard and most
widely used automation networks
• Communicates among a maximum of 64 nodes at 57.6 Kbps and
230.4 Kbps for configuration and data collection
• Allen-Bradley owns and manages the technology that is licensed
to other companies to provide a complete system offering
• Multiple vendors provide a wide array of operator interface, PC
communication cards, and devices for the network including
Allen-Bradley and Reliance
DH-485Connect SLCTM 500 and MicroLogixTM controllers, operator
interface stations, and programming devices to allow
small packets of data to be communicated and shared
• Communicates among a maximum of 32 nodes at 19.2 Kbps
for configuration and data collection
•Allen-Bradley owns and manages the technology that is
licensed to other companies to provide a complete system
offering
• Strong installed base of Allen-Bradley SLC and MicroLogix
controllers and operator interface from a variety of vendors
MediaCheckerTM
Find A Network Problem Before You Have A Production ProblemThis handheld diagnostic tool pinpoints any wire-related
network problem quickly, so you can correct it first, before
production startup.
You can troubleshoot physical layer
faults on both NetLinx-based
and established networks.
With MediaChecker, you can
test network cable for shorts and
opens. It displays distance to
cable short and open. It identifies
connectors improperly wired at the
connector end, and it measures
network cable length, including taps
and drops, and termination resistance.
Save time and money on system installation, and feel
confident knowing your network foundation is solid.
6 7
ControlLogixTM
The high-performance
control platform for multiple
types of control
• Provides a modular, high-
performance control platform suited for sequential, process,
drive, and motion control in any combination
• Allows you to mix multiple processors, networks, and I/O
without restrictions
• Uses the same RSLogixTM 5000 programming environment as
other Logix controllers for maximum program reusability and
minimum training
• Connects to the NetLinx communication architecture for more
efficient network communications and increased throughput
Network Connectivity
EtherNet/IP, ControlNet, DeviceNet, Remote I/O, DH+
ProcessLogixTM
Integrating DCS into your
plant-wide control solution
• Scalable, open control system
for batch and process applications (DCS)
• Tightly integrates HMI and control functions with a server-
based common database
• Shares common hardware, network communications, and I/O
with ControlLogix for tightly integrated plantwide control
• Provides connectivity to Allen-Bradley PanelViewTM and
Rockwell Software RSView32TM
• Connects to the NetLinx communication architecture for more
efficient network communications and increased throughput
Network Connectivity
EtherNet/IP, ControlNet, DeviceNet, Remote I/O, DH+
ControllersNow You Can Do So MuchMore, More Efficiently,For So Much Less.
PLC 5 ®
Rugged design and proven
performance in the world’s most
demanding applications
• The choice for large sequential control applications
• Open networking and easy-to-use windows programming
improve productivity
• Used by over 75% of the Dow Industrials
• Network connections allow for future system expansion
• Widely familiar product and programming tools help save cost in
spare parts and training
Network Connectivity
EtherNet/IP, ControlNet, DeviceNet, Remote I/O, DH+
SLC TM 500Used by industrious
workers everywhere
• Popular choice for
sequential control applications
• Economical and easy-to-use processors with broad capabilities
• A top choice of many OEMs due to its value and flexibility
• Field-proven reliability covering hundreds of thousands of
applications
• Advanced instruction set including indirect addressing, high-level
math capability, and compute instructions
Network Connectivity
EtherNet/IP, ControlNet, DeviceNet, Remote I/O, DH+, DH-485
8 9
CompactLogixTM
The power of Logix in a
small controller
• A cost-effective, powerful
addition to the Allen-Bradley
family of Logix-based products
• Compact form factor and rackless design – compatible with
the full range of CompactTM I/O products – provide a truly
scalable modular system
• Uses the same RSLogix 5000 programming environment as
other Logix controllers for maximum program reusability and
minimum training
Network Connectivity
EtherNet/IP, DeviceNet
MicroLogixTM
Just enough
control at just the right price
• You choose the controller that fits your application needs
• Three controller families – MicroLogix 1000, 1200, and 1500 –
with up to 156 I/O
• Versatility and flexibility in these powerful microcontrollers
with small footprints
• Common instruction set and RSLogix 500 programming software
• You can even get simple, noninterpolated motion control at a
great price
Network Connectivity
EtherNet/IP, DeviceNet, DH-485, Other Networks
FlexLogixTM
Distributed control
without compromise
• Adds local control to
FLEXTM I/O, the compact, modular DIN-rail mounted I/O system
with integrated I/O interface and terminal strip, to reduce wiring
• Provides a distributed architecture less vulnerable to a single
point of failure because control does not depend on a single
master controller
• Reduced startup and simplified maintenance because control
resides close to the machine
• Uses the same RSLogix 5000 programming environment as
other Logix controllers for maximum program reusability and
minimum training
• Connects to the NetLinx communication architecture for more
efficient network communications and increased throughput
Network Connectivity
ControlNet
SoftLogixTM
Bringing together the worlds
of information and control
• An open, PC-based Logix solution that
integrates control, motion, HMI, and
information processing into one complete solution to lower your
total cost of system integration and increase productivity
• Supports Windows® NT/Windows® 2000
• Allows you to mix multiple processors, networks, and I/O
without restrictions
• Uses the same RSLogix 5000 programming environment as other
Logix controllers for maximum program reusability and minimum
training
• Connects to the NetLinx communication architecture for more
efficient network communications and increased throughput
Network Connectivity
ControlNet, DeviceNet, Other Networks
PICOTM
Is it a PLC or is
it a smart relay?
You decide!
• No programming software
required – use the onboard
LCD display and keypad for all programming and data changes
• Small size – smaller than many kinds of relays, saving panel
space and system cost
• Simplicity – performs basic PLC® functions, such as logic,
timers, and counters – anyone can write simple ladder logic
programs or make data adjustments
• Real-time clock, analog inputs for DC controllers, and high-
current relay outputs can eliminate interposing relays, reduce
panel space, and lower system cost
Controller-Coupled I/0
1756 I/OEasy configuration and setup of I/O modules using
wizards increase productivity
• Wide selection of I/O including isolated
and nonisolated digital and analog
I/O, field-side diagnostic digital I/O, temperature-sensing inputs
including thermocouple and RTD, specialty I/O including configurable
flowmeter, high-speed counter, and programmable limit switch
• Diagnostic screens in RSLogix 5000 provide the information
needed to fine-tune the system
• Electronic keying ensures that a module placed in the ControlLogix
chassis is the correct type and revision, preventing replacement errors
Network Connectivity
EtherNet/IP, ControlNet, DeviceNet, Remote I/O, DH+
1771 I/OI/O available to meet nearly any chassis-based application
• Over 150 modules offered
by Rockwell Automation
• Third-party products widely
available to support specialty
applications
• Can be controlled by all Allen-Bradley Controllers using
remote I/O communications
Network Connectivity
ControlNet, DeviceNet, Remote I/O
1746 I/ORemovable terminal blocks allow for quick replacement
without rewiring
• Over 75 modules offered
by Rockwell Automation
• Third-party products widely
available to support
specialty applications
• High-density 32-point
DC I/O and 16-point analog inputs save panel space and reduce
system cost
• High-speed counter modules and fast-response DC inputs
available for high-speed applications
• Fusing and electronic protection reduce the need to replace
modules damaged by short circuits and overloads
Network Connectivity
ControlNet, DeviceNet, Remote I/O
10 11
12 13
Feat
ure
PLC-
5SL
C 50
0Co
ntro
lLog
ixPr
oces
sLog
ixSo
ftLog
ixFl
exLo
gix
Com
pact
Logi
xM
icro
Logi
xPI
CO
Inte
grat
edRe
quire
sRe
quire
sX
XFu
ture
XM
otio
nSe
para
te M
otio
nSe
para
te M
otio
nCo
ntro
ller
Cont
rolle
r
Redu
ndan
cy/
XX
XX
Hot B
acku
p
Mem
ory
100k
64k
7.5
7.5
PC-
512
6412
K0.
5K(m
ax)
Wor
ds*
Wor
ds*
mby
tem
byte
Depe
nden
tkb
yte
kbyt
e
I/O (m
ax)
3072
4096
128,
000
Digi
tal
64 I/
O M
odul
es25
6 Lo
cal
8 Co
mpa
ct15
618
3,80
0 An
alog
Optio
nal
I/O M
odul
esRe
mot
e I/O
Non
vola
tile
Sepa
rate
Sepa
rate
Fu
ture
Futu
reEE
PROM
EEPR
OMM
emor
yEE
PROM
Mod
uleEE
PROM
Mod
ule
Back
upBa
ckup
16, 3
2, 6
4,32
, 64k
Wor
dsM
emor
y10
0k W
ords
Mod
ule
Prog
ram
min
gRS
Logi
xRS
Logi
xRS
Logi
xCo
ntro
l Bui
lder
RSLo
gix
RSLo
gix
RSLo
gix
RSLo
gix
Optio
nal
Softw
are
550
050
00(S
yste
m L
evel
)50
0050
0050
0050
0PI
CO Soft
Prog
ram
min
gLa
dder
,La
dder
Ladd
er,
FBD
Ladd
erLa
dder
,La
dder
,La
dder
Ladd
erEd
itors
SFC,
ST
FBD
FBD
FBD
Loca
l I/O
1771
1746
1756
1756
Non
e17
9417
6917
69,
Embe
dded
1762
only
Dist
ribut
ed17
94, 1
734,
1792
D,17
94,17
34,17
92D,
1794
,173
4,179
2D,
1794
, 179
7,17
94,17
34,
1794
,17
94,1
734,
1792
D,I/O
1791
D, 17
90, 1
798,
1791
D, 17
90, 1
798,
1791
D, 17
90, 1
798,
1756
1792
D, 17
91D,
1797
1791
D, 1
790,
1797
, 179
917
97, 1
799,
1797
, 179
9,17
90, 1
798,
1798
, 179
7, 1
799
1746
1756
1797
, 179
9,175
6
*1 P
LC/S
LC w
ord
= 10
Log
ix b
ytes
Sele
ctio
n Ch
art
Cont
rolle
rs
Distributed I/ONetwork Or System, We Can Connect YouWith The Solution.
General-Purpose I/O Platforms
FLEX TM I/O Family (1793, 1794)The easiest I/O to learn and use
with Plug-n-Play operability
• FLEX I/O family is easily distributed,
with reduced terminations to 4 per
I/O device leading to wiring savings
• Cost-effective I/O due to RIUP I/O modules and space savings on
panel size
• Flexibility in control, communication, I/O, and termination styles
• Mix or match multiple I/O to multiple devices
• Features an integrated terminal strip
• 4- through 32-point modules available
Network Connectivity
EtherNet I/P, ControlNet, DeviceNet,Remote I/O, Other Networks
POINT TM I/O Family (1734, 1734D)I/O with the most structural integrity
and Best-of-Breed machine availability
• Point Level Electronic Diagnostics alert
with wire-off detection, short-circuit
detection, and a single bit for each channel forwarded to
the processor
• Interlocking design maintains backplane
continuity of POINT I/O modules in
high-vibration applications
• Gold-plated contacts (60 microns) are the best in the industry,
guaranteeing highest quality and integrity of system operation
• Replace electronic I/O modules without powering down the system
• Hot plug and play allows OEMs to add machine features and I/O
modules without making changes to the machine’s control software
• 16 points with integrated DeviceNet and Power Supply
• Removable terminations
• The most competitively priced I/O with removable terminations
Network Connectivity
DeviceNet, Other Networks
Targeted I/O Platforms
1769 CompactTM I/OValue-focused I/O offers unique
features and excellent functionality
• Modular, rackless design enhances
cost savings
• Integrated bus/backplane with front insertion and removal
• Highly versatile I/O platform works with CompactLogix and
MicroLogix 1500
• DIN-rail or panel-mount options increase flexibility
• Distributed via DeviceNet Adapter (1769-ADN) for lower
installation costs
Network Connectivity
DeviceNet
1790 CompactBlockTM LDX I/OThe I/O with lower
specifications for lower cost
• Features an expandable block I/O system
• Up to 64 digital points per node
• 1/3 shock and vibration protection of regular CompactBlock I/O
• Modular EDS configuration with RSNetWorxTM v3.0
Network Connectivity
DeviceNet
14 15
1791 Block I/OCost-effective distributed I/O in a self-contained package
• Mounts in smaller, less-expensive enclosures
• Embedded into protected areas of a machine or process
• Easy to wire and install
• Simplified tear-down and reassembly with easy-to-locate
distributed blocks
Network Connectivity
Remote I/O
1791D CompactBlockTM I/OLow price and high value for I/O
on DeviceNet
• Contains protected outputs, selectable
input filter times, autobaud detection, and hardware
watchdog function
• Easy-to-use node address switches for easy configuration
• Features integrated DeviceNet adapter and power supply in base
module plus expansion module
• 50% smaller than FLEX I/O
• Features DeviceLogixTM smart component technology
Network Connectivity
DeviceNet
1797 FLEX ExTM I/OCost-effective I/O with installation
and maintenance savings
• Contains RIUP I/O modules and advanced diagnostics
• Intrinsically safe (IS) for distribution in hazardous areas
• I/O with no need for IS barriers
• Significantly reduces hardware and field wiring costs
Network Connectivity
ControlNet, DeviceNet, Remote I/O, Other Networks
1798 FLEX ArmorTM I/OGet enclosure and wiring savings with this cost-effective I/O
• Up to 64 I/O per node
• Contains 2-, 4-, 6-, or 8-slot backplanes
• Features 12mm QD I/O connection,
12mm or 18mm Network connection, and RIUP I/O module
Network Connectivity
DeviceNet, Other Networks
Specific-Purpose I/O Platforms1792D ArmorBlockTM MaXumTM andHigh-Current ArmorBlockTM I/OMachine-mountable I/O with the
lowest overall maintenance cost
• Contains Point Level Diagnostics for SC, OW
• A variety of input, output (up to 10A), and combo modules
• Direct connect to Flat or Round DeviceNet media provides
major labor cost savings and prevents wiring errors
• Contains node address switches for easy configuration
• Features DeviceLogix smart component technology
Network Connectivity
DeviceNet
1799 Machine-Embedded I/OUnpackaged printed circuit
board I/O that allows you to
buy only what you need
• Ideal for OEMs who do not value packaging; for subassemblies
that are complete Field-Replaceable Units or where the
machine’s structure can provide the protective enclosure
• Same tested and reliable circuit designs as packaged products
• True Component I/O allows for selection of optional hardware
components; allows OEMs to buy “Just What You Need” for
optimal purchasing decisions
• Lowest price-per-point purchase cost
• Comes with DeviceLogix
Network Connectivity
DeviceNet
16 17
18 19
Selection ChartDistributed I/O
General-Purpose Targeted I/O Specific-PurposeI/O Platforms Platforms I/O Platforms
1794, 1793 1734, 1734D 1769 1790 1791 1791D 1797 1798 1792D 1799FLEX I/O POINT I/O Compact Compact Block Compact FLEX Ex FLEX ArmorBlock Machine-Family Family I/O Block I/O Block I/O I/O Armor MaXum I/O Embedded
LDX I/O I/O I/O
I/O Types Digital Analog Digital Analog Digital Analog 24V DC Only Digital 24V DC Only Digital Analog 24V DC Only 24V DC Only 24V DC OnlyCounter/ Counter/ Relay Relay; Analog Frequency
Encoder Relay Encoder Relay Temperature Future: AC TemperatureTemperature Analog
Temperature
Industry-Specific 48V DC Point-Level Patented, Targeted for Rack, Hardware Intrinsically IP65/IP67 IP67 Unpackaged,Attributes 125V DC Electronic Integrated Semiconductor Adapter, Watchdog Safe Hardened Hardened Printed
(Relay) Diagnostics Communication Tool OEMs Power NEMA 4X, CircuitBus Connector Supply, 6P Board I/O
and I/Oin OneBlock
Protected X X X X Not X X XOutputs (24V DC) Necessary
Due to IS
Removable X X X D-Shell X X No No XTerminal Only 12mm 12mmBlocks Quick Quick
Disconnect Disconnect
DeviceLogix X X X
Communication Remote I/O, DeviceNet DeviceNet DeviceNet Remote Integrated ControlNet, DeviceNet, DeviceNet DeviceNetOptions ControlNet, Adapter, Adapter I/O DeviceNet Bus Isolator Other
DeviceNet, Other Adapter to: DeviceNet, NetworksOther Networks Remote I/O,
Networks Other Networks
RIUP X X X X X X
Mounting DIN Rail DIN Rail DIN Rail DIN Rail DIN Rail DIN Rail DIN Rail Machine- Machine- Machine-Options Panel-Mount Panel-Mount Panel-Mount Panel- Panel- Panel-Mount Vertical or Mount Mount Embedded
Vertical or Vertical or Mount Mount Horizontal* Vertical or Vertical orHorizontal* Horizontal* Vertical or Vertical or Horizontal* Horizontal*
Horizontal* Horizontal*
Special Easily Low No Backplane Light-Duty No CE Expandable No Need for No Enclosure No Enclosure IntegrateConsiderations Distributed; Installation Cost Applications; Mark Block I/O IS Barriers; Needed; Needed; into Field-
Reduce Costs; Low Cost System; For AutoBaud AutoBaud ReplaceableTerminations Minimal Per Point; AutoBaud Hazardous Detect Detect Unit
to 4 Per Unused Expandable Detect Areas: Class1,I/O Device Points Block I/O Div 1, or
Zone 1
*No thermal de-rating required.
20 21
Electronic Operator InterfaceKeep Track Of Production.To Keep Production On Track.PanelViewTM Enhanced Operator InterfaceHigh-performance graphic terminals designed for complex
and demanding processes
• Available in keypad or touchscreen versions
• Optimized for processing and manipulating large
amounts of data away from the controller
• Enhanced graphics and functions including expressions and trending
• The choice for PanelView 1200/1200e migration
Network Connectivity
ControlNet, Remote I/O, DH+
PanelView TM Standard Operator InterfaceLow-cost graphic terminals
offering advanced operator
interface solutions
• Offers multiple operator input
capabilities, brilliant monochrome or
color displays, high-performance
functions, and flexible communications
options
• One programming software package (PanelBuilder 32TM)
supports entire family allowing easy conversion and reuse of
existing applications, reducing development time, and
improving productivity
• ATA PC flash memory cards for fast application downloads,
convenient storage of Universal Language Support fonts, and
simplified firmware upgrades
• Local language support for over 46 languages allows for
installation worldwide
Network Connectivity
EtherNet/IP, ControlNet, DeviceNet, Remote I/O, DH+,
DH-485, DF1, Other NetworksPanelView Enhanced Selection Guide
PanelView Standard Selection Chart on following spreadDisplay
Type Color, Active Matrix, Color CRT Display,Thin Film Transistor (TFT) Configurable
VGA or SVGA
Size 10.4-inch (26.4 cm) 14-inch (35.5 cm)Diagonal Diagonal
Replaceable Field-ReplaceableBacklight Backlight
Operator Input Keypad or Touchscreen
Touch Cells 192
Function Keys 21 (F1-F21)
Application 2.25 MB Onboard Flash; Expandable to 15.75 MBMemory with External PC Memory Card
Programming PanelBuilder 1400e
Electrical
Communication Port ControlNet, DH+, Remote I/O
Power Requirements AC: 90-132 or 180-264 VAC; DC: N/A
PanelView 1000e PanelView 1400e
22 23
Selection ChartPanelView Standard Selection Guide
PanelView PanelView PanelView PanelView PanelView PanelView PanelView PanelView PanelView PanelView300 Micro 300 550 550T 600 600T 900 1000 Color 1000 1400
GrayScale
Display
Type Monochrome Transflective Monochrome Liquid Crystal Color Active Color Color Active Matrix Thin Electro- Color CRTLCD with Integral Display (LCD) Matrix Thin Passive Film Transistor (TFT) luminescent (SVGA)
LED Backlight Film Matrix (EL)Transistor
(TFT)
Size 2.87" x 1.67" (73mm x 42mm) 4.75" x 2.38" (120mm x 60mm) 4.54" x 3.4" 6.73" x 5.12" 8.3" x 6.2" 10"x 7.5"(115mm x (171mm x (211mm x 158mm) (225mm x
86mm) 130mm) 191mm)
Replaceable N/A – 100,000-Hour Field-Replaceable Backlight Field-Replaceable Backlight N/A –Backlight LED Backlight Life Emissive
Display
Operator Input Keypad Keypad or Touchscreen Keypad or Touchscreen Keypad or TouchscreenCombination Only Combination OnlyKeypad and Keypad andTouchscreen Touchscreen
Touch Cells 128 128 128 128 384 384 384 384
Function Keys 4 (F1-F4) 8 (F1-F8) 10 (F1-F10) 10 (F1-F10) 16 (F1-F16) 16 (F1-F16) 16 (F1-F16) 21 (F1-F21)
Application Memory 240K Flash (application object + text + bitmaps) 1M Flash (application object + text + bitmaps)
Programming PanelBuilder32 (Windows®-based) PanelBuilder32 (Windows®-based)
Electrical
Communication Port RS-232 DeviceNet, EtherNet/IP, DeviceNet, EtherNet/IP, DeviceNet, ControlNet, DH+, Remote I/O, DH-485, RS-232(DH-485 DH-485, RS-232 ControlNet, DH+, (DH-485 protocol), DF1, Other Networks
protocol), DF1, (DH-485 Remote I/O, DH-485, 8-Pin Mini protocol), DF1 RS-232 (DH-485 protocol),
DIN Connector DF1, Other Networks
RS-232 Printer Port N/A 1200, 2400, 9600, 19200 baud rate 1200, 2400, 9600, 19200 baud rate
Power Requirements AC: N/A; AC: N/A; AC: 85-264 AC: N/A; AC: 85-264 AC: N/A; AC: 85-264 AC: 85-264 AC: 85-264 AC: 85-264DC: 11-30 VDC DC: 18-32 VDC VAC; DC: 18-32 VDC VAC; DC: 18-32 VDC VAC; VAC; VAC; VAC;
DC: 18-32 VDC DC: 18-32VDC DC: 18-32 VDC DC: 18-32 VDC DC: 18-32 VDC DC: N/A
25
DTAMTM Micro/Plus and MicroViewTM Operator Interfaces Text-based operator interface devices designed to
monitor and modify MicroLogix, SLC, and PLC-5 data
table information
• Capable of storing 50 to 244 application screens (model-
dependent) to depict register information, prompt for operator
data entry, or facilitate recipe downloading to modify multiple
registers with a single keystroke
• Contains function keys and numeric keypad for triggering screen
displays, navigating to screens, and setting or clearing data bits
• Includes Point-Access/Display feature to monitor or modify
controller data files, regardless of the programmed screen
Network Connectivity
DeviceNet, Remote I/O, DH-485, DF1
DTAM Plus
• Four-line x 20-character VFD or backlit LCD display
• One function key, numeric and navigation keys
• Standard printer port on 40K memory
modules for local printing of forms,
data, or alarm conditions
DTAM Micro
• Two-line x 20-character backlit
LCD display
• Eight function keys, numeric
and navigation keys
MicroView
• Compact two-line x 16-character backlit LCD display
• Handheld and panel-mount versions for
mounting flexibility
• Two function keys, numeric and navigation keys
• MicroLogix controller support only
DatalinerTM Message DisplaysHighly visible VFD or LED displays for alarm, status, or
other important messages
• Offers master (sends stored messages) and slave (receives
stored messages) functionality
Network Connectivity
Remote I/O, RS-232/485, Parallel
Dataliner DL40 Plus
• Two- or four-line displays
• Replacement for DL40, DL20, and
DL10 Dataliner displays
• Slave version to connect to
DL40 Plus or other ASCII host device
Dataliner DL5
• Compact one- or two-line displays
• Slave version to connect to DL40 Plus
or other ASCII host device
Dataliner DL50
• Red or tricolor LED messages
visible up to 240 feet (73m)
• Selectable character size to
display one- or two-line messages
24
2726
Selection ChartMessage Displays Selection Guide
DTAM Plus DTAM Micro MicroView Dataliner DL5 Dataliner DL40 Plus Dataliner DL50
Display
Type Vacuum Fluorescent LCD with LCD with Vacuum Fluorescent Vacuum Fluorescent (VFD) LED Matrix(VFD) or LCD with LED Backlight LED Backlight (VFD) 5x7 Dot Matrix Red or Tricolor
LED Backlight 14 Segment Characters CharactersAdjustable 0% to 100%
Brightness Level
Character Size/ 0.19" x 0.12" 0.19" x 0.12" 0.22" x 0.12" 1-line: 6.65mm (0.262 in) 11.3mm (0.44 in) 122mm (4.8 in) orHeight (4.75mm x 2.95mm) (4.75mm x 2.95mm) (5.56mm x 2.96mm) 2-line: 5.50mm (0.261 in) 5.33mm (2.1 in) Selectable
Characters 20 20 16 16 20 10 to 40Per Line
Number of Lines 4 2 2 1 or 2 2 or 4 1 or 2
Character Set Standard and Standard and Standard and Alphanumeric; Standard and Extended Standard andExtended ASCII Extended ASCII Extended ASCII Uppercase Only ASCII Extended ASCII
International ISO-8859-1Cyrillic
Operator Input Keypad Keypad Keypad
Function Keys 1 8 (F1-F8) 2 (F1-F2)
Approximate 1m (3 ft) 1m (3 ft) 0.5m (1.6 ft) 3m (10 ft) 7.62m (25 ft) 2.1 in chars: 30.5m (100 ft)Viewing 4.8 in chars: 73m (240 ft)Distance
Memory 8K Up to 244 Up to 50 2K EEPROM 128K(50 application screens) Application Application (94 messages) (up to 4000 messages)
40K Screens Screens 8K EEPROM(244 application screens) (387 messages)
Electrical
Input Voltage P1: 15 – 23V AC, 18 – 30 V DC 11 – 25V DC 12 – 24V DC 100 – 240V AC; 95 – 240V AC;20 – 30V DC; 11–25V DC 50 – 60 Hz 50 – 60 Hz
P2: 85 –265V AC, (DeviceNet 110 – 340V DC; version)P4: 11 – 13 V DC
Communications DeviceNet, DeviceNet, DF1(to MicroLogix) Parallel, RS-232 Remote I/O, Parallel, RS-232, RS-232, RS-485Port Remote I/O, DH-485/DF1 RS-485
DH-485/DF1
RS-232 40K MemoryPrinter Port Version Only
28 29
RAC6155 SL & SM High-Performance Computer †
Fault-tolerant rack-mount computer
• Options include single or dual
processor, dual hot swap,
removable RAID, SCSI hard drive,
10 PCI full-length slots, and 9ISA full-length slots
• Comes with front access fans and hard drives
• Built with a rugged corrosion-
resistant enclosure
• Comes with Pentium® III 600,
700, or 800 MHz processor*
• 4U encloser
RAC6181 Computer †
Available in 10.1”, 12.1” TFT LCD, and nondisplay options
• SVGA resolution (640x480 and 800x600)
• Comes with a Pentium® 166, Pentium®
MMX 233 processor, or AMD K6-2E 366 MHz*
• Bay for EIDE HD – 10+, 20+, 30+ Gbytes
• Designed to run Windows® 98, Windows® NT, or Windows® 2000
• CE mark, UL/CUL 1950 certified
• NEMA 4-rated, 4X stainless option
• Onboard Ethernet 10/100-Base T, 2 USB and 2 PS2 ports
• Pentium® III processor option, 3rd qtr. ’01
RAC6182 Windows CE Computer100% solid-state industrial computer
• Internet-enabled with built-in Web browser
• Runs Windows® CE applications
• Thin client-enabled
• Available with 7.7” STN LCD, 12”
TFT LCD, and nondisplay options
• Supports 640x480 and 800x600 resolution
• Comes with 32-bit RISC processor* and Flash ROM
• Resistive touchscreen option
• NEMA 4X-rated panel, Class I, Division 2
Industrial ComputersStrategic InformationFrom Strategic Locations.To Give You Centralized Control.
RAC6180 Computer †
Available with 10.4”, 12.1”, 15.0,” and nondisplay options
• Panel- or rack-mount options
• Comes with a choice of Pentium® III 600, 700, or 800 MHz
processor* and is designed to run Windows® 98, Windows® NT,
or Windows® 2000
• Bay for EIDE HD – 10+, 20+, 30+ Gbytes
RAC6183 Open Automation Systems†
Works on a variety of platforms including 6180, 6181,
and 6155
• Application software includes SoftControl, Visualization,
Communications, PLC/SLC Programming, and third-party
software
• RAC6183 is pretested, certified, and shipped with system
recovery CD
†Communications options are EtherNet/IP, ControlNet, DeviceNet, Remote I/O, DH+, Other Networks
*Processor speeds are continuously improving. Check www.ab.com for latestprocessor upgrades.
30 31
RAC6185-V Versa-Mount Flat Panel MonitorOffered with versatile
mounting options
• Mounting options include benchtop
pedestal base, bench/wall-mount
arm, bench/wall-mount yoke
• Supports 640x480 to 1280x1024
resolution
• Optional touchscreens include resistive and capacitive
• UL, CE, C-Tick, FCC Class A
• AC and DC integrated and remote power supply option
RAC6188 Operator Display StationConnects to any standard
PC computer
• 316 NEMA 4X stainless steel option
• Features include integrated industrial
keyboard and mouse, and a
tilt-and-swivel adjustment
• Comes with signal extender for remote PC placement
• Available with 15.0” or 18.1” industrial flat panel monitor with
touchscreen
RAC6157 Pure Flat Screen CRT MonitorSupports 640x480 to 1600x1200 resolution
• Optional touchscreens include
resistive, capacitive, and SAW
• Flat panel look at CRT prices
• NEMA 4/12/4X-rated panel
• Panel- or rack-mount options
• CE, UL, CUL, FCC Class A, C-Tick
RAC6186 Pro Performance Flat Panel MonitorDesigned for harsh environments
• Available in 15.0” and 18.1” TFT LCD display
• Common and advanced video
applications and non-PC video support
• Supports 640x480 to 1280x1024 resolution
• Multiple touchscreen options and automatic video setup
• Class I, Division 2, UL, CE, C-Tick
• AC and DC power supply options
• Panel-, rack-, and versa-mount options
RAC6185-A/B/C/D/E Flat Panel MonitorMultiple display options available
• Available in 10.4”, 12.1”, 15.0”,
18.1”, and 20.1” TFT
LCD display option
• Supports 640x480 to
1280x1024 resolution, full color
• Optional touchscreens include resistive and capacitive
• Supports multiple video formats
• NEMA 4/12 or 4X-rated panel
• AC and DC power supply options
RAC6185-H/J/K Economy Flat Panel MonitorIndustrial alternative to consumer monitors
• Available in 15.0” and 17.0” Active Matrix TFT displays
• Supports 1024x768 to 1280x1024 resolution
• 15.0” = 170 nit, 160-degree viewing angle
• 17.0” = 200 nit, 140-degree viewing
angle
• NEMA 4/4X/12-rated panel
• Best used in moderate industrial environments
32 33
Selection ChartIndustrial Computers
RAC6155 RAC6155-S RAC6180 RAC6181 RAC6182
Description Rack-Mount Industrial Rack-Mount Industrial Industrial Computer Industrial Compact Industrial EmbeddedComputer Server Computer with Integrated Flat Computer with Integrated Computer with Integrated
Panel Display Flat Panel Display Flat Panel Display
Processor Types Long-Life Motherboards Single or Dual Pentium® Long-Life Motherboards Intel Pentium® or AMD K6 MIPS, 225MHz RISC& Speeds* and State-of-the-Art III Single Board and State-of-the-Art Processors Available in
High-Performance Computer Design High-Performance Speeds Up to 366MHzPentium® III Processors Offering the Highest Pentium® III Processors
Performance Processors
Number of 7-slot=3 PCI, 3 ISA, 9 ISA, 10 PCI, 1 CPU 7-slot=3 PCI, 3 ISA, 1 1 PCI Slot, 1 Shared 1 PCA Slot (half-length)Expansion Slots 1 Shared PCI/ISA (1 PCI slot (1 ISA slot used by Shared PCI/ISA (1 ISA slot PCI/ISA Slot
used by video card); Fault Tolerant Sentinel used by KIC card, 1 PCI (half-length)6-slot=3 PCI, 2 ISA, Card, 1 PCI slot used by slot used by video card);1 Shared PCI/ISA, RAID controller) 6-slot=3 PCI, 2 ISA,1Shared1 AGP Video Slot Dual CPU Version Requires PCI/ISA, 1 AGP, Video Slot
1 PCI Slot for Video Card (1 ISA slot used by KIC card)
I/O 2 Serial Ports, Keyboard Port, Mouse 2 Serial Ports, 2 Serial Ports (1 used with 2 Serial Ports (1 used with1 Parallel Port, Port, 2 Serial Ports, 1 Parallel Port, touchscreen option) touchscreen option)2 PS/2 Ports, 1 Parallel Port 2 PS/2 Ports, 1 Parallel Port, 2 PS/2 Ports 1 Parallel Port, 2 PS/2 Ports2 USB Ports 2 USB Ports, (keyboard and mouse) (keyboard and mouse)
IrDA Port 2 USB Ports 2 USB Ports1 10/100BaseT 1 10/100BaseT Ethernet Port Ethernet Port1 Video Port 1 Video Port
RAM 7-slot: 32MB to 128MB; 128MB to 384MB 7-slot: 32MB to 128MB; 32MB to 256MB 32MB to 256MB6-slot: 64MB to 512MB PC 100 SDRAM 6-slot: 64MB to 512MB
Display Types Requires External Requires External 10.4" Color TFT LCD, 10.4" Color TFT LCD, 7" Color STN LCD,& Sizes Monitor Monitor 800x600 Resolution; 640x480 Resolution; 640x480 Resolution;
12.1" Color TFT LCD, 12.1" Color TFT LCD, 12.1" Color TFT LCD,800x600 Resolution; 800x600 Resolution 800x600 Resolution15" Color TFT LCD,1024x758 Resolution
Touchscreen Optional Resistive Optional Resistive Optional ResistiveAnalog Touchscreen, Analog Touchscreen Analog TouchscreenOptically Bonded toDisplay Window
Video Interface 4MB PCI Video Card 4MB PCI Video Card on 4MB PCI Video Card Embedded 2MB PCI Embedded 2M PCI Video32MB AGP Video Card Dual Processor Systems 4MB AGP Video Card Video
Embedded 4MB AGP Video 32MB AGP Video Cardon Single Processor Systems (nondisplay only)
Hard Drive 8+ Gbyte EIDE Hard Drive 8+ Gbyte EIDE Hard Drive 8+ Gbyte EIDE Hard Drive 8+ Gbyte EIDE Hard Drive Disk-On-Chip Storage13+ GByte EIDE Hard Drive 9+ GByte Hard Drive 13+ GByte EIDE Hard Drive 13+ GByte EIDE Hard Drive Card, 32MB to 256MB
RAID1 Two Mirrored 9+ GByte 30+ GByte EIDE Hard Drive 30+ GByte EIDE Hard DriveSCSI Hard Drives – Hot-Swappable
Preinstalled Windows® 98, Windows® NT 4.0 Workstation, Windows® 98, Windows® 98, Windows® CEOperating Systems Windows® NT4.0 Workstation, Windows® NT 4.0 Server Windows® NT 4.0 Workstation, Windows® NT 4.0 Workstation,
Windows® 2000 Windows® 2000 Windows® 2000
*Processor speeds are continuously improving. Check www.ab.com for latest processor upgrades.
34 35
Selection ChartIndustrial Monitors
RAC6185-A/B/C/D/E/N RAC6157-C RAC6185-H/J/K RAC6186 RAC6188 RAC6185-V
Description Industrial Flat Panel 19" Pure Flat Economy Performance Operator Industrial FlatMonitor Industrial CRT Monitor Industrial Flat Flat Panel Monitor Display Panel Monitor
Panel Monitor Station in Versa-MountEnclosure
Operating 0°C to 50°C 0°C to 40°C 0°C to 40°C 0°C to 50°C 0°C to 40°C 0°C to 40°CTemperature 0°C to 45°C
with Heat Sync
Operating Shock 20G max. (1/2 sine 10G max. (1/2 sine 10G max. (1/2 sine 20G max. (1/2 sine 10G max. (1/2wave of 11ms duration) wave of 11ms duration) wave of wave of sine wave of
11ms duration) 11ms duration) 11ms duration)
Nonoperating 30G max. (1/2 sine 20G max. (1/2 sine 20G max. (1/2 sine 30G max. 20G max. (1/2 Shock wave of 11ms duration) wave of 11ms duration) wave of (1/2 sine wave of wave of
11ms duration) 11ms duration) 11ms duration)
Video Interface HD-15 (RGB, HS, VS) HD-15 (RGB, HS, VS) HD-15 (RGB, HS, VS) HD-15 (RGB, HS, VS) HD-15 HD-15 (RGB, HS, VS)5 BNC Using Sync-on-Green (RGB, HS, VS) 5 BNC UsingAdapter Cable Composite Sync NTSC, Adapter Cable6' or 15' Video Cables PAL,S-Video,DVI,5BNC 6' or 15' VideoAvailable Using Adapter Cable Cables Available
Display Types 10.4" Color TFT LCD, 19" Pure Flat CRT 15.0" Color TFT LCD, 15.0" Color TFT LCD, 15.0" Color 18.1" Color TFT& Sizes 800x600, 256 Colors; 640x480 to 1600x1200 1024x758, 256 Colors; 1024x758; TFT LCD, LCD, 1280x1024,
12.0" Color TFT LCD, Autosync 17.0" Color TFT LCD, 18.1" Color TFT LCD, 1024x758, Full Color800x600, 256 Colors; 0.25mm Dot Pitch 1280x1024 1280x1024 256 Colors15.0" Color TFT LCD, 16M Colors 18.1" Color 1024x758, 256 Colors; TFT LCD, 18.1" Color TFT LCD, 1280x10241280x1024, Full Color; Full Color20.1" Color TFT LCD,1280x1024, Full Color
Touchscreen Optional 5-Wire Resistive Optional 5-Wire Resistive Optional 5-Wire Optional 5-Wire Optional Optional 5-WireAnalog Touchscreen Analog Touchscreen Resistive Analog Resistive Analog 5-Wire Resistive AnalogOptional Capacitive Optional Capacitive Touchscreen Touchscreen Resistive TouchscreenTouchscreen on Some Touchscreen Optional Capacitive Analog Optional Models Touchscreen on Touchscreen Capacitive
Some Models Touchscreen
Enclosure Type NEMA-4/4X/12 NEMA-4/4/12 NEMA-4/4/12 NEMA-4/4/12 NEMA 4/12 NEMA-1 EnclosurePanel-Mount Panel-Mount Panel-Mount Panel-Mount NEMA 4X VESA FPMPMI-NEMA-4X Stainless 19" EIA Rack-Mount 9U Rack-Mount Stainless Compliant Mounton Some Models Versa-Mount Steel Optional Articulated19" EIA Rack-Mount Pedestals, Arm Available9U Available for 18.1" Armed, Accepts Standardand 15.0" Models Tabletop, VESA FPMPMI Yoke
Ceiling-Mount and Arm Mounting
Operating System Windows® 95/98, 2000, Windows® 95/98, 2000, Windows® Windows® Windows® Windows®
Compatibility Windows® NT V4.0, Windows® NT V4.0, 95/98, 2000, 95/98, 2000, 95/98, 2000, 95/98, 2000,QNX, Linux QNX, Linux Windows® NT V4.0, Windows® NT V4.0 Windows® NT Windows® NT V4.0,
QNX, Linux V4.0 QNX, Linux
36 37
SoftwareConnecting People And Processes To Greater Productivity.
RSNetWorxTM (DeviceNet & ControlNet)Manage the network at the click of a button
• Graphical network management configuration tool for
ControlNet or DeviceNet networks
• An intuitive network browser for multinetwork viewing
• One button for complete network upload/download
• Enhanced diagnostics for real-time indicators
RSLogixTM 5, 500, 5000The “smartest” control software
• Online/offline logic programming
• Program maintenance across hardware platforms
• Upward- and downward-compatible with DOS programs
• Powerful database editing
RSLinxTM
Software that brings the entire network to your fingertips
• Complete communications driver suite for all RSI products
• Viewing of all active networks through a single window
• Ability to simultaneously run any combination of supported
applications
• Fastest optimized OPC, DDE, and Custom C/C++ interfaces
Network Connectivity
EtherNet/IP, ControlNet, DeviceNet, DH+
39
RSView32 TM
Software to see the process
from “anyware”
• An integrated, component-
based HMI software for
monitoring and controlling
automation machines and
processes
• Unprecedented
connectivity to RSI, Microsoft®, and third-party applications
• Reusable, customizable ActiveX® controls that embed directly
into your graphic displays
• Add-On Architecture that allows for adding only the extensions
needed: RSView32 TrendXTM, RSView32 MessengerTM,
RSView32 RecipeProTM, RSView32 SPCTM, and RSLadderTM
Network Connectivity
EtherNet/IP, ControlNet, DeviceNet, DH+, Other Networks for
which there are OPC servers available
Selection ChartSoftware
*Windows 95 is still supported but is not recommended.
RSLogix RSLogix RSLogix RSLinx RSNetWorx RSView325 500 5000
MicroLogix X X X X
SLC X X X X
PLC X X X X
ControlLogix X X X X
SoftLogix X X X
FlexLogix X X X X
Windows® 95/98 X X X* X X
Windows NT® X X X X X X
Windows® 2000 X X X X
38
40 41
Motion ControlHigher Speed,Greater Control,Accelerated Throughput.Ultra3000 Digital Servo DriveHigh-performance, digital servo drive
• Provides analog command control, preset
speed and torque control, as well as
master/follower operation
• Digital velocity and current loops in the
Ultra3000 provide excellent, stable performance,
and the Ultraware software makes them easy to set up
•If your application requires accurate velocity control, the 8 preset
velocities available on the Ultra3000 allow several speeds to be
selected using the drive’s digital inputs
•The Ultra3000’s flexible master/follower mode allows 8 different
master/follower ratios to be selected using the drive’s digital
inputs
Ultra3000i Digital Servo DriveCost-effective option in the Ultra3000 family
• The Ultra3000i digital servo drive with indexing adds basic
position control capability to the Ultra3000 feature set
• The Ultra3000i drive provides an economical solution to
applications that require simple position control
Ultra5000 Intelligent Positioning DriveHigh performance and flexibility for even the most
demanding applications
• A flexible, powerful, C-programmable
intelligent positioning drive
• High-speed digital signal processor
technology, combined with C programmability,
allows the Ultra5000 to execute motion
programs extremely fast
• High-speed applications will benefit from the Ultra5000’s
flexibility and performance
• Best for high-speed applications such as labelers, smart belts,
and flying cutoff systems
• Because the Ultra5000 uses the standard ANSI C library of
functions, it provides a rich set of math, string, and array
commands that are not usually available on intelligent
positioning drives
42 43
1394 Digital, AC, Multiaxis Motion Control SystemThe unique integrated design
makes installation, integration,
and operation a breeze
• A very cost-effective system that
offers the ideal multiaxis motion solution
• Whether your application calls for the integration with Logix
that a SERCOS connection provides (future), the easy-to-use
(NetLinx-based) networking that links PLC, SLC, and
ControlLogix platforms to the 1394 motion controller, or a
standalone motion controller, there is a 1394 configuration that
provides a full feature set to meet your needs
1394 GMC and GMC Turbo Systems with Integrated Drive and ControllerPowerful, easy-to-use motion control system
• A full-featured GMC motion controller integrated with a
modular, digital, AC servo drive provides a single compact
GMC package
• The GMC Turbo provides more GML application program
memory and the highest levels of embedded program execution
• Provides up to four local axes (and 64 via AxisLink) of high-
performance, closed-loop positioning and control
• Uses GML (Graphic Motion Language) Commander
programming software that allows you to quickly program
your motion application by simply creating a diagram, using
graphical icons, and then filling in the motion and process
details
1394 Analog ServoVersatile, standalone, multiaxis servo drive
• Configurable from one to four axes
• Auto-tuning and startup prompting allow quick commissioning
• Local onboard diagnostics and commissioning through the
Allen-Bradley 1201 HIM (Human Interface Module)
• Interfaces to a wide variety of controls using standard
+/- 10V DC analog interface
Network Connectivity
EtherNet I/P, ControlNet,DeviceNet all through controller
44 45
Selection ChartMotion Control
1394 with 1394 with 1394 1394 Ultra3000 Ultra3000 Ultra3000 Ultra5000ControlLogix SoftLogix GMC/GMC Digital with with Digital Intelligent
(mid-2001) Turbo Servo ControlLogix SoftLogix Servo Drive Positioning(mid-2001) Drive
Total # of Axes 32 8 Physical; 4; 64 with 4 32 8 Physical; 1 1.5per Controller 32 Total AxisLink 32 Total
RSLogix X X X XProgramming
GML XProgramming
HIM XProgramming
Ultraware Optional Optional X XProgramming
C Programming X
100 to 240 VAC X X X XSingle-Phase Input
380 to 460 VAC X X X X Future Future Future FutureThree-Phase
Advanced Motion X X X X X XCapability
CE Compliance and X X X X X X X XUL Rating
SERCOS Connectivity X Future X Future
DeviceNet X Future Future Future FutureConnectivity (drive)
DeviceNet X X X XConnectivity (controller)
EtherNet/IP X X X XConnectivity (controller)
ControlNet X X X XConnectivity (controller)