copper bumper stripper - central u.s....

12
To view QR codes for additional information, download QR Reader app to your smartphone. Products The latest addition to the ProFinisher line 3” Sanders with 3/16 and 3/32 orbits. Copper Weld-Thru Primer Exceptional weldability, excellent adhesion to bare metal. Bumper Stripper Designed to remove refinish material, but won’t strip the OEM coating. Fast cutting body shop safe compound, designed for the Professional! M100 Pro Speed Compound M100 Pro Speed Compound Inside this edition are more new products from the following companies. Spraybooth maintenance products from Like90. Pneumatic Bead and Spray Applicator for PlioGrip MSP Sprayable Seam Sealer. See Page 2 See Page 5 See Page 11 See Page 7 See Page 3 See Page 12 See Page 8 See Page 4 Products NEW NEW Winter 2013

Upload: lamkhue

Post on 17-Apr-2018

216 views

Category:

Documents


2 download

TRANSCRIPT

To view QR codes for additional information, download QR Reader app to your smartphone.

ProductsThe latest addition

to the ProFinisher line

3” Sanders with

3/16 and 3/32 orbits.

CopperWeld-Thru PrimerExceptional weldability,excellent adhesion to bare metal.

Bumper StripperDesigned to remove re�nish material, but won’tstrip the OEM coating.

Fast cutting body shop safecompound, designed forthe Professional!

M100Pro Speed CompoundM100Pro Speed Compound

Inside this edition are more new products from the following companies.

Spraybooth maintenance products from Like90.

Pneumatic Bead and Spray Applicator for

PlioGrip MSP Sprayable Seam Sealer.

See Page 2 See Page 5

See Page 11See Page 7

See Page 3See Page 12See Page 8See Page 4

Products

NEWNEW

Winter 2013

The Model 700 is the most aggressive sander yet from Hutchins. Its 5/16” (8 mm) o�set o�ers 25% faster material removal than our Model 600. It is the ultimate tool for anyone looking for true sanding speed. Not only is this a 12,000 RPM sander, it has the same extreme comfort and low vibration characteristics as our Models 500 & 600. No other big o�set sander o�ers this combination!

New 5/16 (8mm) O�set OptionModel 700

Model 503 ProFinisher™ 3/32 O�setA ProFinisher perfect for the Painter for de-nibbing or paint prep. The 3” pad size allows for better �ne sanding of small or hard-to-reach areas.Similar Models: 523 (VA only)*.

Model 603 ProFinisher™ 3/16 O�setA more aggressive 3” sander that the Bodyman can use for shaping andfeather-edging of bumpers, door jambs or any small hard-to-reach area.Similar Models: 623 (VA only)*.

3" ProFinishers

5/16 O�set

Excellentfor

sanding clear coats.

MSRP $182.00

MSRP $189.90

Pg. 2Pg. 2

Hutchins Manufacturing, a family owned and operated company, was established over 70 years ago in Pasadena, California. The founder, Al Hutchinsbelieved in delivering quality and value to the craftsmen in the auto body repairindustry. By utilizing locally available raw materials and resources, Hutchinssanders were proudly produced in the United States. Hutchins sanders werealways considered to be the best tools on the market; they were always reveredas a sign of professionalism when displayed in a technician’s toolbox.

Although Al Hutchins passed some years ago, his sons Alme and Donny carryon the family tradition. Hutchins Manufacturing is still a family owned andoperated company located in the same location, Pasadena, California. Our latestinnovation, the ProFinisher™ series of sanders, is still produced using local rawmaterials and resources. They, like all Hutchins products past & present, areproudly made in the USA!

ProFinishers™ are produced with the latest manufacturing technology allowingHutchins to again o�er great sanders at a competitive price. Since Al Hutchinsopened the doors over 70 years ago, Hutchins manufacturing has been drivento deliver tremendous value and unsurpassed quality to the professionaltechnicians in the auto body repair industry.

Spraybooth MaintenanceCleaner Paint Jobs / Less Time Buffing!We Have The Answer....

Peelable Booth CoatingMake your booth like new again in under 2 hours!

Use Like90 Clear View glass coating in conjunction with Like90 White Out to protect booth lights and windows. The water-based Clear View is applied with the same conventional equipment used to apply White Out and levels to a smooth transparent �lm that won't distort the booth's lighting or the clarity of its windows. As glass surfaces become clouded with overspray, simply peel and reapply Clear View.

"Like90 White Out restores your spray booth to a ""like new"" condition in as little as two hours. Unlike adhesive-backed �lms that are di�cult and time-consuming to apply, this revolutionary water-based coating sprays on fast with no or minimal preparation prior to application. And unlike so-called ""strippable"" coatings, the superior �lm strength and durability of White Out makes removal by peeling fast and easy. In addition, White Out can be recoated between maintenance cycles, so your booth's lighting is always bright and your paintwork top notch.

ApplicationVideo

Keep your paint jobs cleaner!Particle ControlParticle ControlReduces airborne particles in the spray booth by over 50% and traps them on the �oor. Signi�cantly reduces bu�ng time caused by dirt in the paint job.

» Fast and easy once-a-day application using a pump sprayer» Simply sweep up the dirt and overspray with a broom» One 5-gallon bucket allows for approximately 20 applications» Neutralizes particle's electrical charge, allowing them to stick together» Traps particles on the �oor, not on the vehicle» Water-based, low VOC**Like90 Particle Control is the ideal solution for shops that have converted to water-borne systems controlling the dust problems that are caused from increased air �ow.

#10031 "White-Out" Peelable Booth Coating Kit (4 gal white + 1 qt clear)Available in gallons, 5’s, and 55 gallon drum.

#10008 Gallon#10009 5 Gal.#1962CW Sprayer

ApplicationVideo

Pg. 3

• Oil & humidity free air• For installation at point of use• Quick element change• No tools required• 4 Stage, 0.01 micron �ltration• ¼” regulator & gauge• Includes bracket MD4-1

Replacement ElementMD4-1 Replacement Element

*Metal bowl guard includedbut not pictured

MD4Mini Desiccant Dryer

MR1Mini Paint Gun Regulator

This ultra light-weight and durable regulator mounts right on the paint gun to regulate your air �ow precisely, as it automatically adjusts for upstream pressure �uctuations.This guarantees you a perfectly even spray from your gun.

• 0-60 psi Operating Range for Precision Adjustment• Large Diaphragm Design Provides Constant Pressure• Push-Pull Lockable Adjustment Knob• High Flow Air Design, up to 30 scfm• ¼” Inlet & Outlet• Rugged Lightweight Design• Max Inlet Pressure = 200 PSI

MSRP $52.80

Re-Designed 2nd Generation RTIHigh Flow Coupler & Plugs• New Competitive Pricing• Easy Assembly/Disassembly• New High Quality Brass Construction• High Pressure Applications

HFFC-1 $9.80 HFMC-1 $9.80HFFP-1 $1.96 HFMP-1 $1.96

MSRP $195.00

[ Energy e�cient cycling control system saves 30-80% over a non-cycling dryer[ Cycling prevents freezing for the heat exchanger during o� peak operation[ Unit maintains a constant 38° F dew point at the outlet, despite inlet �ow and temp variations[ Accepts inlet air temps up to 158° F and inlet pressures up to 230 PSI[ Compact design minimizes �oor space needed to install dryer

Refrigerated Dryers

Scan for MoreInformation

Scan ForDryair Solutions

Pg. 4

A versatile, heavy-bodied, general purpose seam sealerthat can be caulked or sprayed as a sealer or a sound deadener. Excellent non-sag formula adheres to virtually anysurface, and stays extremely �exible. Won’t shrink, crackor become brittle, and has a “LIFETIME WARRANTY”.

Uses include: sealing trunk and �oor pan seams, quarter panel seams, and any other seam where a sprayed or coated appearance is needed. Bead can be used for general purpose automotive seams, including door skins, rocker panels, rear body panels, trunk seams, and �oor pans. Sprayed seam can be used for trunk seams, quarter panels, any other OEM sprayed seam replacement. Sprayed coating can be used inside door skins, inside body panels, or any area where a sound deadening coating is needed.

Work time 20 min. - Paint immediately or up to 4 days.

MSP Sprayable Seam Sealer

Trusted for more than 30 years in the OEM market, from sports cars to luxury sedans and heavy duty trucks, automakers and truck manufacturers all over the world have put their trust in PLIOGRIP® adhesives.

Now these products are available in the Automotive aftermarket!

MSRP $15.20

Order 3 Cartridges Mix-or-MatchGet 1 FREE!

No. 8018Beige

No. 8012Black O�er Good 01/30/2013 til 03/30/2013

Pneumatic MSP Seam Sealer Dispenser Gun• Ergonomically designed• Lightweight and easy-to-use• E�ortless spray and bead application• Easy change between bead and spray• Precise control with the unique built in-regulator• Quiet operation• Smooth consistent �ow of sealant

** Contact your local PlioGrip distributor for Promotional details**

2M2653 Black Inner Nozzle2M2588 White Outer Nozzle

8046Pneumatic MSP Seam SealerDispenser Gun

Pg. 5

Pg. 6

Pliogrip 7700 polyurethane cartridge products have widespread use in aftermarket plastic repair applications including bumper repair, plastic and composite panel repair, and bonding of SMC or plastic replacement panels. Pliogrip 7700 variations have been listed in repair manuals and/or approved for repair by General Motors, Chrysler, Freightliner, Peterbilt, Kenworth, International, and others. Pliogrip 7700 products are listed in OEM repair bulletins because they pass OEM composite bonding speci�cations. Our products continue to be popular in the body shop because of their excellent performance features:

➢ 100% reactive chemistry, no VOCs, non �ammable, non corrosive, no DOT classi�cation➢ Strongest urethane system on more substrates ➢ Fastest clamp time and fastest sandability for a given work time➢ Uniform rate of cure for skim coats or big beads ➢ Easy Sanding formula➢ 2-year shelf life and the best stability

Adhesives & Repair Products

Scan for moreinformation on PlioGrip Truck Adhesives

PLIOGRIP by Valvoline. Easier to use. Faster to cure. Proven to per form.

PANEL BONDING• Meets GM6449G standards• Bonds bare metal, aluminum, e-coat and SMC/�ber glass• No welding required; can be weld bonded with MIG or compression spot weld• Non-�ammable• Sandable to feather edge and paintable (single step, no body�ller required)• Crash-tested – meets FMVSS 301 Fuel Integrity and FMVSS 208 40 MPH 40% Of f-Frontal Solid Barrier• No odor• Two-year shelf life

PANEL 60PLIOGRIP by Valvoline Panel 60 is a versatile panel bonding adhesive withunmatched strength and high heat resistance. Full scale crash testing hasproven beyond a doubt that Panel 60 bonding adhesive can stand alonewithout accompanying welds on secondary panel repairs.Backed by a “lifetime structural and corrosion warranty”, Panel 60 bondingadhesive is used for bare metal, aluminum, e-coat, SMC and �berglass onquarter panels, roof panels, rear body panels and door skins. It also maybe spot-welded wet and is sandable to a feather edge.

Also available400ml size.

#8040

Scan for moreinformation on PlioGrip Adhesives

Panel 60 (220mL - #8007 / 400mL - #8040)Work Time 60 minutesHandling Strength 4 hours at room temperature or

10-15 minutes at 180˚FPaint Time 8 hours at room temperature or

25-30 minutes at 180˚FAll data taken at 23˚C (74˚F)

WS400-1201

WS400-1301

WS400-1401

WS400-1501

600ml PlasticPCG600P-2

#6039700ml AlumPCG7D-2

#6032D1000ml AlumPCG10D-2

#6038D

5900

5905

5910

5915

5901

5906

5911

5916

5902

5907

5912

5917

5903

5908

5913

5918

HD

HD

HD

HD

1.2 (0.047)

1.3 (0.051)

1.4 (0.055)

1.5 (0.059)

29

29

29

29

12.57

12.57

12.57

12.57

200

220

240

260

365 (14.38)

365 (14.38)

370 (14.57)

370 (14.57)

423 (0.93)

423 (0.93)

423 (0.93)

423 (0.93)

WS400-OBS 5920 5921 5922 5923 1.3 (0.051) 29 12.57 160 365 (14.38) 423 (0.93)

• LONGER WIDER PATTERN• SMOOTH FAST APPLICATION• EPA NESHAP40 CFR, PART 63 SUBPART 6H COMPLIANT• NOW EPA APPROVED

The NEW WS400 with our patented “LV Technology” nozzle design combines a higher �uid delivery that facilitates a faster smother application. The result of the WS400 is a higher transfer e�ciency rate resulting in greater materials savings.

Superior Atomization a higher level of re�nishing....and savings!

The ANEST IWATA W series spray guns complies with regulations for application of coatings. See Speci�cations on this page for a list of areas we serve. These approvals are subject to conditions of the regional air quality agency. Information about these approvals is available at ANEST IWATA USA web site at www.anestiwata.com or call 1-800-440-0282 for details. You may also consult with the regional air quality agency in your jurisdiction.

Pg. 7

OEM ApprovalUnderbody Coating MaterialsCollision Bulletin No. 31-008-12Date: 10/24/2012

Models:DartJourneyPT CruiserSprinter

Approved ProductsChrysler Group Engineering has tested a wide array of after-market repair materials to determine thosewhich provide equivalent protection to the as built material, utilizing the same testing methods as areused for the production approved materials.Of the materials tested, the following satisfy the original engineering requirements for chip resistanceand protection to the substrate. The Chrysler Group recommends the repair materials are as follows:Dominion Sure Seal Professional Truckbed Liners.

No. BSSBL SHAKE & SHOOT Bedliner Kit - BlackNo. BHBLUR HIPPO LINER Bedliner Kit - Black

Not only a great truckbed liner - can be used as a high build-heavy textured chip guard. Can be applied with a schutz gun, or Dominion’s premium schutz gun. No. BUPAE with fully adjustable nozzle.

No. SBSBUMPER STRIPPER

OEM

No. SCWCOPPER WELD-THRU PRIMER

Copper Weld-Thru Primeris designed to eliminate the corrosion that forms between welded substrates.

Bumper Stripper is a unique formulation that will not swell or attack most urethane. The viscous consistency clings to the bumper without sagging. It’s designed to totally remove all re�nish material but not the original factory-baked �nish.

Pg. 8

MSRP $9.38MSRP $15.18

BUPAE

BENEFITS:

• Cleaning with warm water speeds cleaning of

waterborne spray guns and allows for easier

removal of hardened paint.• For use with Uni-ram’s waterborne spray

gun cleaners - model UM120W, UG5000W,

UA400W, UG7500W and UG7500WF

MSRP $995.00

WATER HEATERFOR WATERBORNE SPRAYGUN CLEANER

WALL MOUNT SPRAY GUN CLEANER WITH WASTEWATER TREATMENT BY FLOCCULATION

FEATURES:

• Waste water treatment system built in.

• Cleaning tools - nozzle for cleaning paint passage, pad to clean cap, �ow-through

brush to clean exterior of gun and blow gun to dry paint passage and exterior.

• Air supply whip line included.

• Non-corrosive stainless steel cleaning tank.

• Powered by Uni-ram's dual diaphragm pump.

UM80WF

UM120WMANUAL SPRAY GUN CLEANER

WITH WASTE WATER TREATMENT BY FLOCCULATION

EQUIPPED WITH CLEANING TOOLS TO EFFECTIVELY CLEAN PAINT FROM THE SPRAY GUN

• Wash gun delivers high pressure water to clean the paint channel.• Flow-through brush removes paint from the outside of the gun.• Air gun dries the spray gun and a spray out veri�es a clean paint channel.

$1195.00

$1895.00

UWHLEX

MSRP $1260.00

MSRP $1995.00

COAG-KLEEN FPFLOCCULENT GRANULES FORWATERBORNE PAINT

COAG-KLEEN FP, �occulent, removes the absorbed waste paint solidsfrom water that has been used to clean spray guns. The clean recoveredwater can be reused several times before disposal. The separated paintwaste, when dry, is then disposed of in accordance with local regulations

102-8300 COAG-KLEEN Flocculent Granules (2 kg.) $60.00

AQUA-KLEEN PGCCONCENTRATED CLEANER FOR WATERBORNEPAINT

AQUA-KLEEN PGC is used with a manual or automaticspray gun cleaner to e�ectively wash waterborne paintfrom spray guns.Mix 1 container of AQUA-KLEEN PGC concentrate with 5gal (20 L) of water

102-8200 AQUA-KLEEN Spray Gun Cleaner Concentrate $55.00

102-8125 Primary Mesh Filter bag $19.00102-8126 Secondary Felt Filter bag $18.00

$950.00

Electric Cord

Aluminum Pail

SelectorKnob

Pg. 9

URS500 Economy, 120V Solvent Recycler• Tank Capacity: 5.0 US Gal (20 liters) • Speed: 5.0 US Gal in about 4 hours • Solvent Transfer: Manual • Air Pressure: Not applicable • Power Supply: 110/120V, 1500W, 13.3A • Heater: 1500W • Display: LEDs indicate power on, heat on and 6 temperature set points

MSRP $4,095.00

Uni-ram recyclers feature fast cook times and easyto handle waste residue. Unique hardened aluminumtank construction provides excellent heat transfer.

Cover

Lid

Distillation Tank

Liner Bag

Cleans in under 60 seconds

• 1 gun and 1 pot capacity• 6 swirl action jets.• Cup holder stabilizes gun pot. Knurled plug prevents solvent from entering air passage of gun.• Solvent �ow stops when lid is raised; minimizes operator’s exposure to solvents.• Easy replacement of used solvent pail. Drain valve controls solvent �ow to pail.• Long lasting dual diaphragm pump, requires at least 85 PSI.• Corrosive resistant stainless steel tank and delivery tubes.• Solvent is reused, reducing solvent consumption.• CE safety certi�cation pending.• 1 Year Warranty.

ModelUG110

MSRP $765.00 $690.00

$3695.00

Pg.10

Starter Kit #DMCKIT6 (includes)–D30016 – DA Micro�ber Correction Compound – 16 oz–D30116 – DA Micro�ber Finishing Wax – 16 oz–DMC6 – DA Micro�ber Cutting Disc – 6” (2 pack)–DMF6 - DA Micro�ber Finishing Wax – 6” (2 pack)–S6BP – 6” DA Pad–MGAPRON – Meguiar’s Black Apron

Video

The Meguiar's 8" Cut N' Shine Wool Pad o�ers aggressive cutting action without leaving typical di�cult to remove swirl marks. It removes serious paint imperfections. The quick change Velcro backing system make the Meguiar's 8" Cut N' Shine Wool Pad a snap to change.

• Fast cutting compound with advanced technology• Quick removal of 1200 grit and �ner sanding marks for easier polishing• Removes deep scratches, acid rain or severe swirls/holograms• Works great on fresh & cured paints

A Fast cutting body shop safe compound with advancedtechnology designed for Professionals!

M100Pro Speed Compound

M100Pro Speed Compound

W4000

REVOLUTIONARY PAINT DEFECT REMOVAL AND SURFACE FINISHING WITH NO SWIRLS...GUARANTEED

REVOLUTIONARY PAINT DEFECT REMOVAL AND SURFACE FINISHING WITH NO SWIRLS...GUARANTEED

MSRP $16.20

NEW!NEW!

M10001MSRP

$66.00

M10001MSRP

$66.00

M10032MSRP

$24.00

M10032MSRP

$24.00

NEW!NEW!

Pg. 11

Swirl Free System No residue clean up –No rotary applied system –DA applied method means no slinging of materialQuick and easy system Minimize comebacks/re-do’s –Can deliver the vehicle faster by –Reduce late deliveries or correct concerns eliminating unnecessary steps while customer is waiting

MSRP $119.51

Prices subject to change without notice, not responsible for typographical errors in pricing or product description.Call Central U.S. Marketing your factory representative for product demonstration, or a Distributor near you 708-479-3808.

Central U.S. Marketing10614 Celtic Ct.Mokena, IL 60448708-479-3808www.cusm1.com

Summary of Features:• Finished edge and knit construction will not generate lint• “Wave” knitted fabric picks up and traps all particulates• Non-transferring formulation• Glides smoothly• Very long life• Premium product for Re�nish Professionals• Large 18" x 18" size• Made in U.S.A.

Item # Description Packaging

02000 9C Tek PrepTM Lint-Free 1 per bag Knit Polyester 12 bags/display box Tack Cloth 12 boxes/case

NEW!NEW!

• Recommended for Paint Spray applications, including oil-based paints.• NIOSH P95 Filter for Solid & Oil aerosols.• Softer and More Comfortable.• Includes Bonus Hygiene Guard and Shape Retainer insert.• Completely assembled & individually packed in resealable 4-color foil bags.• Best design, performance and comfort.

8000 SeriesNIOSH OV/P95 Disposable Cartridge Respirators

SIZE PART #Med 08211PLarge 08311P

MSRP $15.60

Special$14.95 ea.

MSRP $12.50

Special$11.25 / box