copy9 userguide iphone 1.0.en

Document version 1.0.2, updated 26-07-2011For application Copy9 version 1.1

Support: [email protected] | The information in this document are the property of Goldenspy©2010

1 /16

COPY9 USER GUIDE for iPhone

Installation for iPhone Devices

Welcome to the installation page for your iPhone. Copy9 is ONLY

compatible with ANY jailbroken iPhone 3G, 3GS, iPhone 4, iPad at least

3.1.3 firmware and above. You need Cydia application to install Copy9. This guide

assumes you have already opened an account on www.goldenspy.com.

IMPORTANT NOTE: It is recommended you do a backup of your phone in

iTunes before proceeding with the steps. The steps will not cause you to lose any

music, pictures, apps, settings, etc. We DO NOT provide support with jailbreaking

the iPhone, but can recommend useful sites to obtain information on the

jailbreaking process.

There are 3 different groups of steps you must perform. These groups of

steps are listed below:

1. Jaibreak your iPhone which install Cydia at the same time.

2. Install Copy9 using Cydia.

3. Login and configuring the parameters for Copy9.

1. Jailbreak your phone which installs Cydia

What is Jailbreaking & Why do I need it?

The application Copy9 needs to run silently in the background. It's

necessary to jailbreak your iPhone so you can run the silent application in the

background.

Jailbreaking your phone install automatic Cydia. There is no cost to

jailbreaking your iPhone and it is completely reversible if the need should ever

arise.



2 /16

How to Jailbreak your iPhone

You can decide on which method you want to use. Again, we DO NOT

provide support or instructions on how to jailbreak your iPhone.

2. Install Copy9 using CydiaAttention: Check before if you have an Internet access by Wi-Fi or 3G

with your iPhone. After that we can start to install Copy9 program with

Cydia.

Find Cydia

Search on the springboard of

your iPhone the icon of Cydia.

Tap with your finger on the

icon Cydia to run the

application.

Agree to any requests from

Cydia. If it asks you to choose

"Developer, User, or Hacker"

please choose "User". Then

Cydia will restart to reflect

those changes. If Cydia asks

you to download any updates,

please do so.



3 /16

Tap Manage on the main screen of

Cydia.

1. Then tap the Sources box.

2. On this screen tap Edit button

3. Then tap the Add button.



4 /16

4. In the Add Sources pop-up

box, type

http://iphone.goldenspy.com/

and tap on button Add Source.

5. Tap Done button.

6. Now tap the

iphone.goldenspy.com.

7. Now tap on the Copy9 entry



5 /16

8. Then tap the Install button to

install Copy9

9. On this screen, tap the button

Confirm.

10.Wait until Cydia finished to

install the application Copy9 in

your iPhone. When this screen

appears, press the Home

button to exit the application

Cydia

The installation of Copy9 in your

iPhone is finished. You need to restart

your iPhone.



6 /16

POWER OFF THE iPHONE

To power off the iPhone press at the

same time this 2 buttons.

And then POWER IT BACK ON.

To power on the iPhone press at the

same time this 2 buttons.

Come back to the springboard, you

will see the icon of application Copy9.



7 /16

3. Login and configuring the parameters for Copy9Check before if you have an Internet access by Wi-Fi or 3G with your

iPhone.

1. On springboard tap on the Copy9 icon to bring up the interface. Now the

interface should appear and prompt you for your log in information.

Use your email/ password you had created on www.goldenspy.com in

these fields. Tap on button Send, if the information is correct, an alert

will display message “login successfully”.

If you cannot log in:

- Check if you have an internet connection in your iPhone.

- Check again your email address and password and send again.

- Log in your account on web site www.goldenspy.com to verify your

account is already created and valid.



8 /16

2. Now that you have logged in successfully, you can configure the options

you want. Tap the button Settings. This will bring up the options menu

where you can select which options you want. To turn a specific function

On or Off, just swipe your finger over the slider to turn the function

On or Off.

Tap the Auto Answer in the menu settings. This will bring up the

automatic answer feature. This feature allows you to make a call from

the monitor phone to the target phone to turn on the micro, so you will

hear the target’s surroundings. The target phone will automatic answer

without ringing or indicating your incoming call.

If this option is disable, the number phone configured in Monitoring

number can do a normal calling in the phone target.

If this function is in ON, when the Monitoring number call the target

phone, the target phone automatic answer without the user know. You

can hear all what’s happened around the target phone.



9 /16

3. Tap the GPS. This will bring up the GPS tracking feature. Here, you can

select to turn this feature On or Off and select the frequency that Copy9

will record GPS locations and the distance between 2 positions Copy9 will

record.

If you turn on the function Send SMS, Copy9 will send and SMS to

the monitoring phone configured in General to alert the target phone is

moving more than the meter specified. More you define the interval short,

more the battery of your iPhone will go down fast.

If you already installed the software TraceYou in your iPhone, you

can track in real time any mobile phone where Copy9 is installed.

If you activate the trace mode, Copy9 will send the GPS location of the

target phone every 30 seconds during 30 minutes. You can use the

remote SMS command to activate this function without to touch the

target phone.



10 /16

4. Tap the General to define some parameters.

- Monitoring number. Specify in this field, the number phone will

control the target phone by sending SMS. For example: uninstall

Copy9, activate/deactivate auto answer etc… See the list of functions

you can control by remote in Remote Access.

- Hide/Show Copy9. It’s possible to hide and show the icon of

application Copy9 and Cydia in the springboard. Define in this field

the password you will use to activate this function.

Attention: Don’t forget to start the password by character “#” and at

the end “*”.

- Hide Icon Cydia. You can activate this option to forbid user to

uninstall application Copy9.

- Save Battery. If you consider Copy9 go down too much the battery

of the iPhone, activate this option. In this case, Copy9 will get and

send GPS position of the device every time the iPhone wake up.

- Activate Copy9. If you don’t need to use always Copy9, deactivate

Copy9 is the best way . You can anytime activate again with the

command SMS remote access.

To Activate send an SMS to the target phone with this text <*#2>

To Deactivate send an SMS to the target phone with this text <*#3>

Don’t forget to define the monitoring phone number.

- The button Reset All Settings, restore the default values of Copy9

like when you install the application.



11 /16

5. Tap the Remote Access in the menu setting.

ONLY the phone number configured in the field Monitoring number can

remote control the target phone. This option will give you the way to

remote the target phone, by sending SMS command. The user of target

phone will don’t see in the history of his SMS any SMS used to remote the

phone.

- SMS to change monitoring phone number.

Enter in this field a text to order the target phone to change the

monitoring number configured in Copy9.

For example if you enter the text “TEST20”, when the target phone

receive an SMS with this text <*#97><TEST20>, Copy9 will get the

phone number of the sender of this message and will replace the

Monitoring Number by the new number.

- SMS to activate/deactivate auto answer.

In the field Activate, define the SMS you will send to the target phone

to activate the function Automatic Answer.

For example: “START AUTOANSWER”.



12 /16

In the field Deactivate define the SMS you will send to the target

phone to deactivate the function Automatic Answer.

For example “STOP AUTOANSWER”

If you forgot the SMS you configured, anyway you can send an SMS

with the default value: <*#4> to activate, and <*#5> to deactivate.

- If you want to uninstall the application Copy9 from target phone, send

an SMS to the target phone with this message :

<*#email address#password>

For example if your account is [email protected] with password

demo, send an SMS contains this text:

<*#[email protected]#demo> to the target phone.

Be careful, if you uninstall the application Copy9 from target phone,

you need after that, to have the target phone in your hand to install again

the application Copy9. It’s not easy to install Copy9 on iPhone without to

have in your hand the device.

6. If you want to hide the icon of Copy9 and Cydia application from

springboard, tap on phone icon to do a calling, tape the default password

#123456* and tap the green button Call.



13 /16

In case you change the default password in Copy9, tape the new

password you configured.

You can hide also the icon Cydia on springboard to don’t let the user

uninstall the application Copy9. After that you will see the icons of

application Copy9 disappear from your springboard.

If you need to show again the icons of Copy9 and Cydia in your

springboard, execute the same operation. Tap on phone icon to do a calling,

tape the default password #1234* or the new password you configured in

Copy9 and tap the green button Call.



14 /16

List of SMS remote control commands

Default value with parameters Comment<*#1> Reset default values<*#2> Activate application Copy9

<*#3>Deactivate Application Copy9 (but not deactivate remote control,hide/show Copy9 interface functions)

<*#4> Activate Auto Answer<*#5> Deactivate Auto Answer<*#11> Activate History calling<*#12> Deactivate History calling<*#13> Activate History SMS<*#14> Deactivate History SMS<*#15> Activate GPS<*#16> Deactivate GPS<*#17> Send an alert SMS if user move more than distance filter<*#18> Disable send an SMS when target phone move<*#21> Activate History URL<*#22> Deactivate History URL

<*#23>Let the phone go to sleep mode to save battery (locate GPS and flushdata when phone wake up)

<*#24>Don't let the phone go to sleep mode (never go to sleep, GPS locationwill be updated regularly)

<*#25> Show icon Copy9<*#26> Hide icon Copy9<*#27> Show icon Cydia<*#28> Hide icon Cydia<*#30><500> Define the distance filter in meter (default value 500 meters)

<*#31><300>Define the interval to get location in seconds (default value 300seconds)

<*#35> Send all temporary data to server

<*#40><30><25><10>Run trace mode (configure 3G, Wifi, service location, 30s, 25m,10mnstop to trace)

<*#41> Stop trace mode<*#90><Phone_number> Set the phone number of the SIM CARD<*#93><email><password> Uninstall application Copy9 from target phone<*#94><password> Set password to hide/show icon Copy9<*#97><sms user define OR tel> Change the monitoring phone number of user

<*#100>

Request Copy9 send setting information of Copy9 and device tomonitor number by SMS message.(battery %, free space disk, OS version, email, password, monitorphone number, etc...)

<*#101> Send alert SMS message to monitor when SIM card is changed<*#102> Don't send alert SMS message to monitor when SIM card is changed

For example, if you want to turn on Trace Mode via SMS message, just use

monitor phone number (specified in General -> Monitoring phone) to send a

message with content like <*#40><30><25><10> to target phone. Copy9

will turn on Trace Mode. Each 30 seconds, Copy9 will update GPS location if



15 /16

target phone moves more than 25 meters and send new location to server. You

can see target phone movement through application TraceYou in your iPhone,

or TRACE YOU utility in website www.goldenspy.com.

Monitor phone number: phone number used to remote control application

Copy9 on target phone via SMS message.

Target phone number: SIM CARD number is used in phone installed

Copy9. When user changes SIM CARD on target phone, Copy9 will send to

monitor phone number an alert message by new SIM CARD number of target

phone. When you receive this message, you have to reply a message with

content like below: <*#90><target phone’s new SIM CARD number> to

let Copy9 know the new SIM CARD number used on target phone.

UNINSTALL COPY9 WITH CYDIA

1. To uninstall Copy9 with Cydia,

Run the application Cydia and

select the button Manage.

2. Tap Packages.



16 /16

3. Search Copy9 in the list of

applications installed in the

iPhone.

4. And select the button Remove at

the top right of the screen.

Wait a moment during the

uninstallation and reboot your

iPhone.

copy9 userguide iphone 1.0.en

Documents