copyright by phillip kimaiyo koech 2007
TRANSCRIPT
The Dissertation Committee for Phillip Kimaiyo Koech Certifies that this is the
approved version of the following dissertation:
ENONES AND ENALS AS LATENT ENOLATES IN CATALYTIC
C-C BOND FORMING PROCESSES: TOTAL SYNTHESIS OF (-)-
PAROXETINE (PAXIL®)
Committee:
Michael J. Krische, Supervisor
Philip D. Magnus
Stephen F. Martin
Alan H. Cowley
Sean M. Kerwin
ENONES AND ENALS AS LATENT ENOLATES IN CATALYTIC
C-C BOND FORMING PROCESSES: TOTAL SYNTHESIS OF
(-)-PAROXETINE (PAXIL®)
by
Phillip Kimaiyo Koech, B.Ed.; M.S.
Dissertation
Presented to the Faculty of the Graduate School of
The University of Texas at Austin
in Partial Fulfillment
of the Requirements
for the Degree of
Doctor of Philosophy
The University of Texas at Austin
May 2007
v
Acknowledgements
I would like to thank Professor Michael J. Krische for giving me the opportunity
to work in his laboratory, for his motivation and intellectual support. I am for ever
grateful to my parents and my wife Tecla who have been very supportive throughout my
graduate career. I would like to also thank the Krische group members for their
intellectual discussions that have contributed to my success. Special thanks to Pete
Webber, Regan Jones, Cisco Bee, Ryan Patman, and Venu Komanduri for proof reading
this dissertation.
vi
ENONES AND ENALS AS LATENT ENOLATES IN CATALYTIC
C-C BOND FORMING PROCESSES: TOTAL SYNTHESIS OF
(-)-PAROXETINE (PAXIL®)
Publication No._____________
Phillip Kimaiyo Koech, Ph. D.
The University of Texas at Austin, 2007
Supervisor: Michael J. Krische
Enolates constitute one of the most commonly utilized intermediates in synthetic
organic chemistry. However, the regioselective generation of enolates remains a
challenge, especially for non-symmetric ketones possessing identical degrees of
substitution at the α-positions. Our research has shown that regioselective enolate
generation can be achieved by the activation of enones and enals with either 1)
nucleophilic phosphine catalysis or 2) transition metal catalysis to generate enolates
regioselectively. These enolates can be subsequently trapped with electrophiles.
Using nucleophilic phosphine catalysis we have developed the first method for
the α-arylation of enones, enals, and nitroalkenes using bismuth(V) reagents. This
phosphine-catalyzed arylation methodology is mild in that a strong base is not required.
Additionally, the products of this reaction are easily elaborated to complex molecules.
vii
This method has been strategically applied in a concise formal and enantioselective total
synthesis of the blockbuster antidepressant (-)-paroxetine (PAXIL®).
In transition metal catalysis, we have used enantioselective Cu-catalyzed
conjugate addition of Grignard reagents to enones to provide magnesium enolates, which
can be arylated using bismuth(V) reagents to furnish products of vicinal
difunctionalization of enones. These products are obtained in modest to good yields with
complete control of both relative and absolute stereochemistry. Another method for
regioselective enolate generation is the Rh-catalyzed hydrogenation of enones and enals.
Using this method we have developed a reaction that involves addition of metallo-
aldehyde enolates to ketone acceptors to afford aldol products. This is the first catalytic
direct addition of transition metal enolates to ketones.
viii
Table of Contents
List of Tables ......................................................................................................... xi
List of Figures ...................................................................................................... xiii
List of Schemes.................................................................................................... xiv
Chapter 1 Historical Overview of Nucleophilic Catalysis Via Conjugate Addition of Phosphines to Enones and Enoates .................................................................1 1.1 Introduction...............................................................................................1 1.2 Rauhut-Currier Reaction...........................................................................1
1.2.1 Application of Rauhut–Currier Reaction in Total Synthesis ......7 1.3 Morita-Baylis–Hillman Reactions ............................................................9
1.3.1 Intramolecular Morita-Baylis-Hillman Reaction ......................12 1.3.2 Asymmetric Morita-Baylis-Hillman Reaction ..........................14 1.3.3 Aza-Morita-Baylis-Hillman Reaction .......................................17 1.3.4 Asymmetric aza-Morita-Baylis-Hillman Reaction ...................20
1.4 Phosphine-Catalyzed/Mediated α-Allylation of Enones.........................22
1.5 Phosphine-Catalyzed/Mediated α-Alkylation of Enones .......................24 1.6 Phosphine-Catalyzed Allylic Substitution of MBH Acetates.................26 1.7 Other Phosphine-Catalyzed Reactions Involving Activated Alkenes ....30 1.8 Summary and Outlook ............................................................................32 1.9 References...............................................................................................33
ENONES AND ENALS AS LATENT ENOLATES IN CATALYTIC C-C BOND FORMING PROCESSES: TOTAL SYNTHESIS OF (-)-PAROXETINE (PAXIL ®) 37
Chapter 2 Catalytic α-Arylation of Enones, Enals, Nitroalkenes, and the Total Synthesis of (-)-Paroxetine (PAXIL®) ..........................................................37 2.1 Introduction.............................................................................................37
2.1.1 Transition Metal-Catalyzed Enolate Arylation .........................38 2.1.2 Enolate Arylation Using Triarylbismuth(V) Reagents ............41 2.1.2 .1 Mechanism for C-Arylation of Enolates Using Bismuth(V)
Reagents .................................................................................42
ix
2.2 Catalytic α-Arylation of Enones and Enals Using Triarylbismuth(V) Reagents...............................................................................................44 2.2.1 Optimization ..............................................................................45 2.2.2 Substrate Scope ......................................................................46
2.3 Catalytic α-Arylation of Nitroalkenes Using Triarylbismuth(V) Reagents..............................................................................................................50 2.3.1 Optimization ..............................................................................50 2.3.2 Substrate Scope ......................................................................51
2.4 Application of the Phosphine-Catalyzed Enone α-Arylation in Formal and Enantioselective Total Synthesis of Paroxetine (PAXIL®) .................54 2.4.1 Retrosynthetic Analysis ...........................................................57 2.4.2 Formal Synthesis of (±)-Paroxetine (PAXIL®) ......................57 2.4.3 Enantioselective Total Synthesis of (-)-Paroxetine (PAXIL®) 59 2.4.4 Attempted Concise Route to (-)-Paroxetine ...........................62
2.5 Summary and Concluding Remarks .......................................................63 2.6 Experimental Section ............................................................................64 2.7 Spectroscopic Characterization Data ...................................................89 2.8 References ..........................................................................................151
Chapter 3 Copper-Catalyzed Enantioselective Tandem Conjugate Addition-Arylation Using Bismuth(V) Reagents .......................................................................157 3.1 Introduction...........................................................................................157 3.2 Asymmetric Copper-Catalyzed Tandem Conjugate Addition Electrophilic
Trapping Reactions ............................................................................159 3.2.1 Mechanistic Features ................................................................159 3.2.2 Copper-Catalyzed Asymmetric Tandem Conjugate Addition-
Electrophilic Trapping Reactions Involving Organozinc reagents ...................................................................................................160
3.2.3 Copper-Catalyzed Asymmetric Tandem Conjugate Addition-Electrophilic Trapping Reactions Involving Grignard Reagents163
3.3 Copper-Catalyzed Enantioselective Tandem Conjugate Addition of Grignard Reagents to Enones-Arylation Using Bismuth(V) Reagents166 3.3.1 Optimization ............................................................................166 3.3.2 Substrate Scope ....................................................................167
x
3.4 Summary and Concluding Remarks .....................................................169 3.5 Experimental Section ..........................................................................170 3.6 Spectroscopic Characterization Data .................................................173 3.7 References ..........................................................................................186
Chapter 4 Hydrogen Mediated Catalytic Addition of Metallo-Aldehyde Enolates to Ketones .......................................................................................................189 4.1 Introduction...........................................................................................189
4.1.1 Mechanistic Features ...............................................................189 4.1.2 Reductive Aldol Under Hydrogenation .................................191 4.1.2 .1 Rh-Catalyzed Hydrogenative Aldol Using Aldehyde
Acceptors .............................................................................191 4.1.2 2 Rh-Catalyzed Hydrogenative Aldol Using Ketone Acceptors
...................................................................................................193 4.1.2.3 Rh-Catalyzed Hydrogenative Generation of Metallo-
Aldehyde Enolates via Enal Hydrogenation ...........................196 4.2 Catalytic Addition of Metallo-Aldehyde Enolates to Ketones .............198
4.2.1 Optimization ............................................................................199 4.2.2 Substrate Scope ....................................................................200
4.3 Summary and Concluding Remarks .....................................................205 4.4 Experimental Section ..........................................................................206 4.5 Spectroscopic Characterization Data .................................................211 4.6 References ..........................................................................................265 Vita ..........................................................................................................267
xi
List of Tables
Table 2.1: Optimization table for α-arylation of enones ..................................46
Table 2.2: Phosphine-catalyzed α-arylation of 2-cyclohexenone using Ar3BiCl2
reagents ............................................................................................47
Table 2.3: Phosphine-catalyzed α-arylation of 2-cyclopentenone using Ar3BiCl2
reagents ..........................................................................................48
Table 2.4: Phosphine-catalyzed α-arylation of crotonaldeyde using Ar3BiCl2
reagents .............................................................................................49
Table 2.5: Optimization table for α-arylation of nitroalkenes .........................51
Table 2.6: Phosphine catalyzed α-arylation of aromatic nitroalkenes using
triarylbismuth(V) reagents. ...............................................................52
Table 2.7: Phosphine catalyzed α-arylation of hetero-aromatic nitroalkenes using
triarylbismuth(V) reagents. ............................................................53
Table 3.1: Optimization for copper-catalyzed enantioselective tandem conjugate
addition-arylation of 3.4..................................................................167
Table 3.2: Copper-catalyzed enantioselective tandem conjugate addition-arylation
using bismuth(V) reagents ..............................................................168
Table 4.1: Rh-catalyzed reductive cyclization of monoenone monoaldehyde 4.1a.
.........................................................................................................192
Table 4.2: Intermolecular reductive aldol reaction under hydrogenation conditions.
.........................................................................................................193
Table 4.3: Highly syn-selective reductive aldol through tri-furylphosphine effect
.........................................................................................................193
Table 4.4: Rh-catalyzed hydrogenative aldol using dione acceptors...............195
xii
Table 4.5: Rh-catalyzed hydrogenative aldol condensation to pyridazines ...197
Table 4.6: Optimization of the catalytic aldol cycloreduction of keto-enals 4.18a.
.........................................................................................................200
Table 4.7: Catalytic aldol cycloreduction of keto-enals 4.18a-4.21a ..............201
xiii
List of Figures
Figure 1: Relative stereochemistry as determined by single X-ray diffraction
analysis for acid derivative of 4.18b...............................................202
Figure 2: Relative stereochemistry as determined by single X-ray diffraction
analysis of product 4.21b ................................................................203
xiv
List of Schemes
Scheme 1.1: Mechanism for Rauhut-Currier reaction .............................................2
Scheme 1.2: Rauhut-Currier reaction of activated alkenes and fumaric/maleic esters
.............................................................................................................3
Scheme 1.3: First Cross Rauhut-Currier reaction ....................................................3
Scheme 1.4: Krische/Roush intramolecular Rauhut-Currier reaction .....................5
Scheme 1.5: Enone-sulfone cycloisomerization ......................................................6
Scheme 1.6: Rauhut-Currier/aldol reaction .............................................................6
Scheme 1.7: Enone-thioenoate cycloisomerization and total synthesis of (±)-
ricciocarpin A.................................................................................... 7
Scheme 1.8: Transannular Rauhut-Currier reaction and total synthesis of
(-)-spinosyn A ...................................................................................8
Scheme 1.9: Discovery of Morita-Baylis-Hillam reaction ......................................9
Scheme 1.10: Rate acceleration of MBH reaction at low temperature..................11
Scheme 1.11: MBH reaction using phosphonium salts ....................................... 11
Scheme 1.12: A plausible mechanism for phosphine-Brønsted acid co-catalyzed
MBH ............................................................................................... 12
Scheme 1.13: Intramolecular Morita-Baylis-Hillman reaction .............................13
Scheme 1.14: Keck’s intramolecular Morita-Baylis-Hillman reaction .................13
Scheme 1.15: Phosphine mediated intramolecular Morita-Baylis-Hillman
reaction............................................................................................ 14
Scheme 1.16: Effect of alkene geometry on MBH reaction ................................14
Scheme 1.17: Asymmetric intramolecular Morita-Baylis-Hillman reaction.........15
xv
Scheme 1.18: The first phosphine-catalyzed asymmetric intermolecular MBH
reaction..............................................................................................15
Scheme 1.19: Zhang’s asymmetric MBH reaction .............................................. 16
Scheme 1.20: MBH reaction catalyzed by BINOL derivative ............................ 17
Scheme 1.21: Phosphine-catalyzed aza-Morita-Baylis-Hillman reaction .............18
Scheme 1.22: Shi’s aza-Morita-Baylis-Hillman reaction ......................................19
Scheme 1.23: Enones and acrylates with N-arylidenediphenylphosphinamides in
aza-MBH reaction........................................................................... 20
Scheme 1.24: MBH reaction of β-substituted activated alkenes and
electrophiles .................................................................................... 20
Scheme 1.25: Asymmetric aza-MBH reaction ......................................................21
Scheme 1.26: Cycloallylation of enones using both phosphine and palladium
catalysts.............................................................................................23
Scheme 1.27: Phosphine-mediated cycloallylation of enones...............................24
Scheme 1.28: Phosphine-mediated cycloalkylation of enones ..............................25
Scheme 1.29: Phosphine mediated MBH reaction involving epoxide
electrophiles ......................................................................................26
Scheme 1.30: A plausible mechanism for phosphine-catalyzed allylic amination27
Scheme 1.31: Phosphine-catalyzed allylic amination of MBH acetates................28
Scheme 1.32: Phosphine-catalyzed diastereoselective allylic substitution of MBH
acetates..............................................................................................29
Scheme 1.33: A plausible mechanism for the phosphine-catalyzed allylic alkylation
of MBH acetates ..............................................................................29
Scheme 1.34: Phosphine-catalyzed [3,3] rearrangement of allylic acrylates ........30
xvi
Scheme 1.35: Phosphine-catalyzed hydration and hydroalkylation of activated alkenes
...........................................................................................................31
Scheme 1.36: Proposed mechanism for hydration and hydroalkylation of activated
alkenes...............................................................................................31
Scheme 2.1: Regiospecific enolate generation via enone reduction......................38
Scheme 2.2: A plausible mechanism for Pd-catalyzed ketone arylation...............39
Scheme 2.3: Palladium-catalyzed direct α-arylation of ketones............................40
Scheme 2.4: Arylation of carbonyl compounds and phenols using bismuth(V)
reagents. ............................................................................................42
Scheme 2.5: Isolation and decomposition of intermediates ..................................43
Scheme 2.6: Proposed mechanism reductive elimination step..............................43
Scheme 2.7: Proposed catalytic mechanism for αarylation of enones and enals.. 45
Scheme 2.8: GlaxoSmithKline synthesis...............................................................55
Scheme 2.9: Jacobsen's synthesis ..........................................................................56
Scheme 2.10:Retrosynthetic analysis of (-)-Paroxetine.........................................57
Scheme 2.11: Catalytic α-arylation of dihydropyridinone 2.32 ............................58
Scheme 2.12: Conversion of α-aryl dihydropyridinone 2.33a to (±)- Paroxetine.58
Scheme 2.13: Attempted asymmetric protonation of enol silanes 2.36a and
2.36b .................................................................................................59
Scheme 2.14: Oxazaborolidine reduction of 2.37..................................................60
Scheme 2.15: Conversion of enone 2.33b to homoallylic alcohol 2.41.. ..............61
Scheme 2.16: Enantioselective total synthesis of (-)-paroxetine ...........................62
Scheme 2.17: Attempted concise approach to (-)-paroxetine................................63
Scheme 3.1: Stork's application of tandem conjugate addition-alkylation in total
synthesis of lycopodine...................................................................157
xvii
Scheme 3.2: Catalytic cycle for copper-catalyzed conjugate addition-electrophilic
trapping reactions involving organozinc reagents. .........................160
Scheme 3.3: The asymmetric tandem conjugate addition-aldol involving organozinc
reagents ...........................................................................................161
Scheme 3.4: Application of asymmetric tandem conjugate addition-aldol in total
synthesis of PGE1 methyl ester .......................................................161
Scheme 3.5: Copper-catalyzed asymmetric intramolecular conjugate addition-aldol
reaction............................................................................................162
Scheme 3.6: Copper-catalyzed asymmetric conjugate addition-allylation reaction162
Scheme 3.7: Hoveyda's copper-catalyzed asymmetric conjugate addition-alkylation
reaction............................................................................................163
Scheme 3.8: Asymmetric conjugate addition of Grignard reagents to enones using
amidophosphine 3.24 ....................................................................164
Scheme 3.9: Copper-catalyzed asymmetric conjugate addition of Grignard reagents to
enones using ferrocenyl diphosphine ligands .................................165
Scheme 4.1: A plausible mechanism for hydrogenative C-C bond formation. ...190
Scheme 4.2: Rh-catalyzed hydrogenative aldol using ketone acceptors .............194
Scheme 4.3: A plausible catalytic mechanism for hydrogenative aldol reaction 196
Scheme 4.5: Catalytic aldol cycloreduction of keto-enals 4.22a-4.26a ..............204
Scheme 4.6: Transition state model consistent with observed stereochemistry ..205
Chapter 1: Historical Overview of Nucleophilic Catalysis via Conjugate
Addition of Phosphines to Enones and Enoates
1.1 Introduction
Organocatalytic transformations have emerged as powerful methods for carbon–
carbon bond formations. 1 Transformations based on nucleophilic activators form a
distinct sub class of organocatalytic reactions.2 Between 1960 and 1990 phosphines were
not used extensively as nucleophiles. However, in the last decade reports on nucleophilic
catalysis employing phosphine nucleophiles have increased dramatically. Conjugate
addition of phosphine nucleophiles to activated alkenes provides intermediates that can
be trapped by electrophiles resulting in new C-C bond formation. Tertiary phosphines
and amines have pyramidal geometry, whereas phosphines are configurationally stable at
above room temperature, tertiary amines undergo inversion at room temperature. This
means phosphines retain chirality at phosphorus at room temperature which can
potentially be exploited in asymmetric synthesis. In this account we present an overview
of phosphine mediated reactions based on conjugate addition of p-nucleophiles to vinylic
carbonyl and vinylic nitrile compounds.
1.2 Rauhut-Currier Reaction
In 1963 Rauhut and Currier reported a phosphine-catalyzed dimerization of alkyl
acrylates.3 Later, in 1965 McClure,4 Baizer and Anderson5 independently reported a
phosphine-catalyzed dimerization of acrylonitrile. This transformation is believed to
proceed via reversible phosphine conjugate addition to an activated alkene to give a
zwitterionic enolate I, which undergoes conjugate addition with a second activated alkene. 1
Proton transfer followed by elimination of the phosphine results in the dimer IV (Scheme
1.1).
R3P CO2R
CO2RR3P
CO2RR3P
CO2R
CO2RR3P
CO2R
CO2R
CO2R
EWGP(Alkyl)3 or P(Ar)3
EWG = CN, CO2R EWG
EWG
IV
III
II
I
CO2R
Scheme 1.1 Mechanism for Rauhut-Currier reaction
In 1969 Morita and Kobayashi reported a reaction between activated alkenes and
fumaric/maleic esters catalyzed by tricyclohexylphosphine to provide product 1.3
(Scheme 1.2).6 The first cross coupling reaction between acrylonitrile and acrylate was
reported by McClure in 1970 (Scheme 1.3). 7 The cross coupling product 1.6 was
obtained in 48% yield, along with products of homodimerization in 22-25% yield.
2
O
RO
O
RO
EWGPCy3
O
RO
O
RO EWG
EWG = CO2Me, CO2H, CNR = H, Me, Bu
1.31.1 1.2
Scheme 1.2 Rauhut-Currier reaction of activated alkenes and fumaric/maleic esters
O
OEtCN
PBu3 (1 mol%)
100 °CO
OEt
CNO
OEt
OEt
CN
CN
O
1.6, 48% 1.7, 22% 1.8, 25%1.4 1.5t-BuOH
Scheme 1.3 First Cross Rauhut-Currier reaction
Three decades passed with very few reports of phosphine-catalyzed Rauhut-
Currier reaction. During this period several groups reported tertiary amine-catalyzed
variants of the Rauhut-Currier reaction.8 In 2000, Jenner reported a phosphine-catalyzed
dimerization of β-substituted acrylonitrile and acrylate under both ambient and high
pressure. 9 The lack of selectivity in Rauhut-Currier reactions involving different
activated alkenes remained a major limitation. Krische and Roush have concurrently
addressed this problem through an intramolecular process, in which the activated alkene
partners are tethered (Scheme 1.4). 10 Aromatic-aliphatic mixed bis(enone) 1.9 gives the
cycloisomerization products 1.10 and 1.11 as a 1:1 mixture of isomers, whereas the
homologous substrate 1.12 affords the cyclohexenes 1.13 and 1.14 in a 7:1 ratio,
respectively. These data suggests that the kinetic phosphine adducts are trapped
efficiently via cyclization to cyclopentene, but for cyclohexene formation, a slow
cyclization rate enables a pre-equilibrium of tributylphosphine adducts. Unsymmetric
3
electronically biased bis(enones) undergo chemoselective cycloisomerization initiated by
addition of the more electrophilic alkene onto the less electrophilic alkene as shown in
substrates 1.15, 1.21, 1.24 and 1.27. For substrates lacking significant electronic
difference, steric factors direct chemoselectivity as demonstrated in substrate 1.18. It was
observed by both groups that tertiary amine nucleophiles such as DABCO, DBU, Et2NH,
and DMAP, which are common catalysts for Morita-Baylis Hillman reaction, were less
effective in catalyzing intramolecular Rauhut-Currier reaction than the trialkylphosphine
nucleophiles. This low reactivity is attributed to the fact that trialkylphosphines are more
nucleophilic than the corresponding tertiary amines. Triarylphosphines are not viable
catalysts for this transformation. In 2004 Krische and Luis reported that vinyl sulfones
serve as effective Michael acceptors in phosphine-catalyzed intramolecular Rauhut-
Currier type reaction, to provide cyclic products as single regioisomers (Scheme 1.5).11
4
Ph
OCH3O
Ph
O CH3
O
O
H3C
O
Ph
n n1.9, n = 11.12, n = 2
PBu3 (10 mol%)
EtOAc, 76 °C77-79%
1:17:1
H3C
OOEtO
H3C
O OEt
O
O
EtO
O
CH3PBu3 (10 mol%)
t-BuOH, 25 °C87% >95: 5
H3C
OPhO
H3C
O Ph
O
O
Ph
O
CH3PBu3 (10 mol%)
EtOAc, 76 °C81% >95: 5
H3C
OOCH3O
H3C
O OCH3
O
O
H3CO
O
CH3
PMe3 (10 mol%)
EtOAc, 76 °C83-95%
H
OOCH3O
H
O
O
OCH3 O
H3CO
O
HPMe3 (20 mol%)
t-amyl-OH, 76 °C90% >95: 5
1.21, n = 11.24, n = 2
n
n n n
97:392:8
1.101.13
1.111.14
1.15 1.16 1.17
1.18 1.19 1.20
1.221.25
1.231.26
1.27 1.28 1.29
Scheme 1.4 Krische/ Roush intramolecular Rauhut-Currier reaction
5
R
O SO2Ar
R
OSO2Ar
n n
1.30, n = 11.33, n = 2
PBu3 (10-20 mol%)
EtOAc, 25-130 °C74-89%
ArO2S
n
O
R
>95:5
Ar = p-NO2PhR = Ph, CH3, SEt
1.311.34
1.321.35
Scheme 1.5 Enone-sulfone cycloisomerization
Recently Roush and Thalji reported a tandem Rauhut-Currier/aldol reaction that
results in unprecedented chemoselectivity in the aldol step (Scheme 1.6).12 Experimental
data indicate that the phosphonium moiety of the phosphine-enone Michael adduct 1.40
controls the chemoselectivity. The phosphonium unit interacts with the adjacent carbonyl
as seen in intermediate 1.40, enhancing the acidity of the β-phosphonium-substituted
methyl ketone promoting regioselective deprotonation by the alkoxide to provide enolate
1.41.
CH3
O
CH3
OPBu3 (1 mol%)
60 °CCF3CH2OHn
CH3
O
CH3
On
O
CH3n
1.36, n = 1 1.38, n = 2
1.37, n = 1, 76%1.39, n = 2, 80%
Me
O
COMe
PR3RO-ROH
CH2
O
COMe
R3P
1.40 1.41
Scheme 1.6 Rauhut-Currier/aldol reaction
6
1.2.1 Application of Rauhut–Currier Reaction in Total Synthesis
In 2003 Krische and Agapiou showed that thioenoates participate in highly
chemoselective phosphine-catalyzed cross Michael cycloisomerization with appendant
aryl ketone and enoate partners to afford cyclopentene and cyclohexene products
(Scheme 1.7).13 This methodology was subsequently applied in a concise total synthesis
of the furanosequiterpene lactone ricciocarpin A 1.44.
SEt
O
O
O PBu3 (20 mo%)
t-BuOH (135 °C)
81% O
SEtO
O 3 steps OH
H
O
O1.42 1.43 1.44
Scheme 1.7 Enone-thioenoate cycloisomerization and total synthesis of (±)-ricciocarpin
A
Roush and co-workers reported a transannular phosphine mediated Rauhut-
Currier cyclization, also known as a vinylogous-Morita-Baylis-Hillman reaction, of the
Diels-Alder adduct 1.45 en route to total synthesis of (-)-spinosyn A (Scheme 1.8).14 The
product of the transannular reaction 1.46 was elaborated to the desired natural product (-
)-spinosyn A in seven steps.
7
O
OCH3
OMeOMe
HBr
H O
O
H3COPMP
OCH3
PMe3 (8 eq)
t-amyl-OH, 25 °C
100%(88:7:5)
O
OCH3
OMeOMe
HBr
H O
O
H3COPMP
OCH3
7 stepsO
OCH3
OMeOMe
H H O
O
H3CO
OCH3
OCH3
NMe2CH3
(-)-spinosyn A
O
1.45 1.46
1.47
Me
Scheme 1.8 Transannular Rauhut-Currier reaction and total synthesis of (-)-spinosyn A
8
1.3 Morita-Baylis–Hillman Reactions
The phosphonium enolate intermediates generated via phosphine conjugate
addition to activated alkenes can be captured by other electrophiles such as aldehydes. In
1968 Morita and co-workers reported the first reaction between acrylates and
acrylonitrile with aldehydes in the presence of tricyclohexylphosphine to afford 2-(1-
hydroxy-alkyl)acrylonitriles or -acrylates (Scheme 1.9). 15 Subsequent to this seminal
result, in 1972 Baylis and Hillman reported a similar transformation using the tertiary
amines such as DABCO, pyrrocoline, and quinuclidine.16 This Morita-Baylis-Hillman
reaction is an atom economical transformation for coupling activated alkenes, which
include acrylic esters, acrylonitrile, vinyl ketones, phenyl vinyl sulfones, phenyl vinyl
sulfonate esters, vinyl phosphonates and acrolein with a variety of electrophiles such as
aliphatic, aromatic, and α-β-substituted aldehydes. The phosphine-catalyzed MBH
reaction involving β-substituted activated alkenes requires more forcing conditions due to
the slow conjugate addition of the phosphine to the alkene.
EWG
H R
O EWGR
OHPCy3 (0.6 mol%)
Dioxane, 120 °C
70-90%1.48 1.49 1.50
EWG = CN, CO2MeR = Me, Et, n-Pr, i-Pr, Ph, p-Cl-C6H4, P-Me-C6H4
Scheme 1.9 Discovery of Morita-Baylis-Hillam reaction
Low conversion rate, substrate dependent chemical yields, and the susceptibility
of the phosphine catalyst to undergo air-oxidation is a significant limitation of the
Morita-Baylis-Hillman reaction when applied to complex synthetic problems. Based on
9
kinetic studies by Kaye and Bode the rate determining step is the trapping of the transient
zwitterionic enolate by the aldehyde. 17 Due to these limitations the MBH reaction
remained under developed for over a decade despite its synthetic potential. In the 1980s
there was significant research activity in this area devoted to tertiary amine-catalyzed
variants of MBH reaction.2 Tertiary amines are cheaper and less toxic than
trialkylphosphine catalysts, however phosphines give better yields in a shorter reaction
time.
Kawanisi and co-workers improved the efficiency of the phosphine-catalyzed
MBH reaction by introducing a lewis acid-base complex, tributylphosphine and
triethylaluminum in dichloromethane.18 Later in 2002 Taylor and co-workers applied
these conditions to the synthesis of epi-epoxydon. 19 Leahy and Rafel observed
unexpected rate acceleration in both amine and phosphine catalyzed MBH reactions upon
lowering the reaction temperature to 0 °C (Scheme 1.10).20 Typically MBH reactions
take between 4-7 days to reach completion, but at 0 °C, the similar transformations were
done in less than 12 hours. The authors rationalized this surprising observation by
considering the transient enolate intermediates A and B, which are both in equilibrium
with the starting material and react at different rates with the aldehyde. It was speculated
that the relative concentration of A and B is different at 0 °C compared to at elevated
temperature and thus the accelerated rate in MBH reaction reflects this difference.
Evidence consistent with this proposal is that there was no rate enhancement in MBH
reaction of acrylonitrile and benzaldehyde, since acrylonitrile is not predisposed to form
intermediates like A.21
10
Fu and Netherton in 2001 addressed the air-sensitivity problem associated with
trialkylphosphines by employing the air and moisture stable phosphonium salts as
catalyst precursors and sodium phenoxide base (Scheme 1.11). 22 These conditions
addressed both reaction efficiency and air sensitivity of the phosphine catalyst, the MBH
product 1.56 is obtained in 94 % yield with a reaction time of only 1h.
MeO2C
H R
O MeO2CR
OHPBu3/DABCO (cat.)Dioxane 0 °C
67-74%1.51 1.52 1.534h-12h
MeO2C
1.51
PR3 PR3O
MeO
PR3
O
MeO
PR3
A B
R = Me, Et, i-Pr, Bu, Ph
Scheme 1.10 Rate acceleration of MBH reaction at low temperature
O
H
O O[(n-Bu3)PH]BF4 (20 mol%)
PhONa (20 mol%)
THF, r.t, 1h
94%1.54 1.55 1.56
OH
Scheme 1.11 MBH reaction using phosphonium salts
The Morita-Baylis-Hillman reaction rate can be accelerated by using Lewis base-
Brønsted acid co-catalysts.23 According to mechanistic studies performed by Liu and Shi
the Brønsted acid in the co-catalyzed systems stabilizes the phosphonium enolate
intermediates via hydrogen-bonding with the enolate anion, thus driving the reaction
11
forward (Scheme 1.12).23c The co-catalyzed mechanism was investigated using 31P NMR
and ESI mass pectroscopy.
R3PH-B
CH3
O
CH3
O
Bu3P
H-B
H R
O
CH3
O
Bu3P
R
OB-H
CH3
O
R
OH
Scheme 1.12 A plausible mechanism for phosphine- Brønsted acid co-catalyzed MBH
reaction
1.3.1 Intramolecular Morita-Baylis-Hillman Reaction
The first phosphine-catalyzed intramolecular variant of the Morita-Baylis-
Hillman reaction was reported by Frater in 1992.24 This reaction afforded cyclization
products in low yields (17-23%). Murphy investigated this reaction further and reported
cyclization of enones onto aldehydes to form both five and six- membered rings (Scheme
1.13).25 Tributylphosphine catalyst gave good chemical yields for six-membered ring
formation 1.59, 1.60 and low yields for five-membered ring formation 1.57, 1.58 (20% or
less).
12
R
OO R
O OH
nn
PBu3 (20 mol%)
CHCl3, 25 °C
Ph
O OH OH
Ph
O OH
EtO
O
75% 50%20%
EtO
O OH
trace1.57 1.58 1.59 1.60
Scheme 1.13 Intramolecular Morita-Baylis-Hillman reaction
Keck and Welch observed that thioenoates cyclize efficiently onto aldehydes in
the presence of trimethylphosphine to give both five-membered and six-membered ring
products (Scheme 1.14). 26 The enoate cyclization onto the aldehyde was sluggish
providing the MBH adduct 1.63 in low 33% yield. They found that enolizable aldehydes
were more prone to side reactions, such as dimerization, and cylizations are more
sensitive to slight variations in experimental conditions.
R
OO R
O OH
nn
PMe3 (10 mol%)
CH2Cl2, 25 °C
EtS
O OH OH
EtS
O
75%83%
EtS
O OH
83%1.61 1.62 1.64
Me
MeEtO
O OH
33%1.63
Scheme 1.14 Keck’s intramolecular Morita-Baylis-Hillman reaction
In 2004 Koo and co-workers reported a triphenylphosphine mediated
intramolecular MBH reaction (Scheme 1.15).27 A dramatic solvent effect was observed in
this reaction, when polar solvents like t-BuOH and MeCN provided excellent yields of
13
desired cyclic products while less polar solvents gave lower yields. Recently Toy and co-
workers performed similar experiments using both E and Z enones with an appendant
aldehyde (Scheme 1.16).28 The substrates possessing (Z)-alkene stereochemistry 1.71
gave a higher yield of the desired cyclic product than did the corresponding E isomer
1.69. This dramatic difference in reactivity was attributed to steric effects.
R
OO
R
O OH
nn
PPh3 (100 mol%)
t-BuOH, 30-40 °C
H
O OH
83%98%
Ph
O OH
78%1.65 1.66 1.68
Et
O OH
78%1.67
Bu
O OH
Scheme 1.15 Phosphine mediated intramolecular Morita-Baylis-Hillman reaction
R
OO
R
O OH
R
O
OPPh3 PPh3
Slow Fast1.69 1.70 1.71
Scheme 1.16 Effect of alkene geometry on MBH reaction
1.3.2 Asymmetric Morita-Baylis-Hillman Reaction
In 1992 Franter and co-workers reported the first asymmetric intramolecular
MBH reaction using p-chiral phosphine (-)-CAMP 1.73 to catalyze cyclization of an
enoate onto a ketone to afford cyclopenten-ol ester 1.74 in 14% ee (Scheme 1.17).23, 29
Subsequent to this seminal result Soai in 1998 reported the first asymmetric
14
intermolecular MBH reaction utilizing chiral phosphine catalysts such as BINAP to
catalyze the coupling of pyrimidine carboxaldehydes and methyl acrylate in low (9-44%)
ee (Scheme 1.18).30 They observed that the use of (S)-Tol-BINAP improved the chemical
yield, however, the enantioselectivity was slightly decreased.
EtO
OCH3
HO CH3O
PPh
Me
OMe1.73 (-)-CAMP
1.72 1.7425 °C
75% yield, 14% ee
EtO
O
Scheme 1.17 Asymmetric intramolecular Morita-Baylis-Hillman reaction
N
NR1
O
H OR2
O (S)-BINAP (20 mol%)
CHCl3, 20 °C N
NR1
OH O
OR2
PPh2PPh2
BINAP
R1 = H, MeR2 = Me, Et, i-Pr
1.75 1.76 1.77
1.78
8-26% yield9-44% ee
Scheme 1.18. The first phosphine-catalyzed asymmetric intermolecular MBH reaction
Zhang and co-workers prepared and applied D-manitol derived chiral
phospholanes 1.81-1.84 to the asymmetric MBH reaction (Scheme 1.19). 31 These
phosphine catalysts gave the MBH adduct 1.80 in low enantioselectivity. Rate
enhancement was observed in the case of hydroxyl phospholane 1.81. Ikegani reported in
2000, that phenol and BINOL (10 mol%) are effective bronsted acid co-catalysts when
used with tributylphosphine (20 mol%) in the coupling of cyclic enones with aliphatic
aldehyde to afford MBH adducts in almost quantitative yields.23a The reaction of 2-
15
cyclopentenone with hydrocinnamaldehyde in the presence of (R)-BINOL and
tributylphosphine gave the desired MBH adduct in low ee (<10 ee) however, a calcium
Lewis acid co-catalyst [Ca+2-(R)-BINOL] (16 mol%) with tributylphosphine (10 mol%)
gave the MBH adduct in 62% yield and 56% ee. Schaus and co-workers have developed
a highly enantioselective MBH reaction using partially saturated BINOL derivatives
substituted at the 3/3′ position as co-catalysts with triethylphosphine in the coupling of 2-
cyclohexenone 85 and a variety of aldehydes (Scheme 1.20). 32 This reaction provides
MBH adducts in good yields and excellent enantioseletivities (67-96% ee). Aliphatic
aldehydes gave higher enantioselectivity than unsaturated or aromatic aldehydes.
N
O
H OEt
OCat. (10 mol%)
N
OH O
OEt
1.79 1.4 1.80
P
CH3
CH3
HO
HOP
R
R
BnO
BnOP
CH3
CH3
O
OB
83% yield, 17% ee1.81 1.82 R = CH3 29% yield 19% ee
1.83 R = Bn 18% yield, 2% ee1.84
56% yield, 18% ee
Scheme 1.19 Zhang’s asymmetric MBH reaction
16
R
O
H
O Cat. (10 mol%)Et3P (100 mol%)
THF, -10 °C
OOH
R
Aldehyde
Ph
O
H
CH3 O
H
O
HCH3
H3CH
O
O
O
O
H OHOH
X
X
X =
CH3
CH3H3CH3C
39%, 81% ee 72%, 96% ee 71%, 96% ee 82%, 95% ee
70%, 92% ee
1.86 1.87 1.88 1.89
1.90
1.85
1.91
Scheme 1.20 MBH reaction catalyzed by BINOL derivative
Carretero and co-workers have shown that readily available
ferrocenyldialkylphosphines are viable catalysts for MBH reaction between acrylates and
aldehydes to provide MBH adducts in excellent yield (62-98%). 33 The asymmetric
variant of this reaction was attempted using a set of planar chiral
ferrocenyldialkylphosphines and the best enantioselectivities were obtained using
Mandyphos as catalyst (up to 65% ee).
1.3.3 Aza-Morita-Baylis-Hillman-Reaction
A phosphine-catalyzed modification of the Morita-Baylis-Hillman reaction was
first reported by Kahn and Bertenshaw in 1989 in which acrylates and aldehydes are
coupled in presence of a sulphonamide or carbamate using triphenylphosphine to give 2-
methylidene-3-amino esters (Scheme 1.21).34 The α-aminoalkyl acrylates obtained in this
reaction are precursors to β-amino acids.
17
R1
O
H R2
OH2NR3
PPh3
2-Propanol, 40 °C R1
O
R2
HNR3
R1 = Me, MeOR2 = Ph, n-PrR3 = Ts, Boc, Cbz
50-98 %1.92 1.93 1.94 1.95
Scheme 1.21 Phosphine-catalyzed aza-Baylis-Hillman reaction
After the intial report by Kahn, Shi and co-workers have done extensive studies in
aza-MBH reaction, where aldehydes have been replaced by the highly reactive N-
arylidene-tosylamides, to give α-alkylidene-β-amino carbonyl compounds (Scheme
1.22).35 2-Cyclopentenone 1.54 and methyl vinyl ketone 1.100 participate in aza-MBH
reaction in the presence of phosphine catalysts and a diverse range of activated imines
derived from both electron rich and electron deficient aromatic aldehydes to give
coupling products 1.97 and 1.101 in good yield. Phosphine catalysts are better catalysts
than tertiary amines in this reaction. When a similar reaction was performed using 2-
cyclohexenone 1.85, a mixture of products was isolated: the MBH product 1.98 and two
diastereomers of bicyclic products derived from the aldol reaction followed by
intramolecular Michael addition of sulfonamide 1.99. Recently Toy and co-workers have
been able to perform aza-MBH reactions using polystyrene-supported triphenylphosphine
as a catalyst for coupling methyl vinyl ketone and phenyl acrylate with various tosyl
imines in good yields.36
18
O
+
O
Ar
NHTs
O
+PBu3 (20 mol%)
THF, 25 °C
O
Ar
NHTs
PBu3 (20 mol%)
THF, 25 °C
70-99%
NTs
O
Ar
25-40% 35-48%
+
H3C
O
+PPh3 (20 mol%)
THF, 25 °CH3C
O
Ar
NTs
1.96 1.97
1.96
1.54
1.85
1.961.100
1.98 1.99
1.101
Ar = neutral, electron-rich and electron-poor arenes
67-92%
Ar
NTs
Ar
NTs
Ar
NTs
Scheme 1.22 Shi’s aza-Morita-Baylis-Hillman reaction.
Subsequently, Shi and Zhao utilized N-arylidenediphenylphosphinamides 1.102
as electrophiles in aza-MBH reactions of a variety of acrylates, and acrylonitriles with
methyl vinyl ketone using Ph2PMe, PPh3, and DABCO as catalysts (Scheme 1.23).37 The
reaction of N-arylidenediphenylphosphinamides 1.102 with methyl acrylates requires
Ph2PMe as a catalyst for optimal yields and for acylonitrile DABCO is the catalyst of
choice. The authors report that the N-arylidenediphenylphosphinamides can be generated
in situ by performing a one pot, three-component aza-MBH reaction of arylaldehydes,
diphenylphosphinamide and methyl vinyl ketone in the presence of a Lewis acid TiCl4
(0.8 equiv), PPh3 (0.1 equiv) and Et3N (12 equiv) to provide aza-MBH adducts in good
yields. 35b
19
R
O
+Cat. (20 mol%)
DMF/ MeCN/THFR
O
Ar
HN
1.1021.92 1.10319-99%
PPh2
O
R= Me, OMeAr = p-EtC6H4, p-MeoC6H4, p-FC6H4, p-ClC6H4,Ar = p-BrC6H4, p-NO2C6H4, C6H5-CH=CH
Cat. = PPh3, Ph2PMe, DABCO
Ar
NPPh2
O
Scheme 1.23 Enones and acrylates with N-arylidenediphenylphosphinamides in aza-
MBH reaction
Shi and co-workers have studied a more challenging variant of the aza-Morita-
Baylis-Hillman reaction, involving β-substituted activated alkenes and N-tosyl imines
(Scheme 1.24). 38 In this reaction β-substituted aldehydes, enones, enoates, and
thioenoates are coupled with a variety of N-tosyl imines 1.96 in THF at ambient
temperature in the presence of a tertiary phosphine Lewis base such as PPh2Me or
PPhMe2 to give the corresponding aza-MBH adducts in good yields as a mixture of E-
and Z-stereoisomers.
R
O
+Cat. (20-25 mol%)
THF, 25 °CR
O
Ar
NHTs
1.961.104 1.10542-86%
R = H, Ph, Me, OMe, OPh, SPhAr = m-NO2C6H4, p-MeC6H4, p-FC6H4, p-ClC6H4,p-BrC6H4, p-NO2C6H4, m-F-C6H4
Cat. = PhPMe2, Ph2PMe,
CH3 CH3Ar
NTs
Scheme 1.24 MBH reaction of β-substituted activated alkenes and electrophiles
1.3.4 Asymmetric aza-Morita-Baylis-Hillman Reaction
Following the successful discovery of the aza-Morita-Baylis-Hillman reaction of
activated alkenes with N-tosyl imines in the presence of triphenylphosphine catalysts, Shi
20
and co-workers turned their attention to the asymmetric variant of this reaction using
chiral triarylphosphine catalysts. They designed the 2′-diphenylphosphanyl-
[1,1′]binaphthalenyl-2-ol catalyst, which catalyzes the asymmetric aza-MBH reaction of
a diverse number of N-tosyl imines with methyl vinyl ketone or phenyl acrylate to give
aza-MBH adducts in good yield with good enantioselectivity (76-94% ee (Scheme
1.25).39 The reaction involving acrylates and acrolein was sluggish and thus required
elevated temperatures of 40 °C in CH2Cl2 to give aza-MBH product in 52-77% ee. The
authors believe that the chiral catalyst is bifunctional with the phosphine acting as a
Lewis base and the phenolic OH acting as a Brønsted acid via hydrogen bonding. 31P
NMR spectroscopic data support an intramolecular hydrogen bonding between the
phenolic OH and the carbonyl oxygen which in turn stabilizes the in situ generated
enolate, resulting in a rigid transition state.
R
O
+
THF, -30 °C
R
O
Ar
NHTs
1.961.106 1.10749-85%76-94% ee
OHPPh2
10 mol%
R = H, Me, OPhAr = Ar = m-NO2C6H4, p-MeC6H4, p-FC6H4, p-ClC6H4,p-BrC6H4, p-NO2C6H4, m-F-C6H4
Ar
NTs
Scheme 1.25 Asymmetric aza-MBH reaction
21
1.4 Phosphine-Catalyzed/Mediated α-Allylation of Enones
A variant of the Rauhut-Currier reaction that involves trapping of the transient
enolates generated via phosphine conjugate addition to the enone with non-classical
electrophiles such as π-allyls was reported by Krische and co-workers in 2003.40 The
authors utilized allylic carbonate as a latent electrophile, which is activated by a low
valent palladium to form a palladium-π-allyl, at the same time an appendant enone is
activated by tributylphosphine to generate a phosphium enolate intermediate 1.109
(Scheme 1.26). The two intermediates react to give a cyclic organophosphonium, which
undergoes β-elimination to give the enone cycloallylation products 1.110-1.114. This
cycloallylation reaction provides five cyclic products 1.110-1.112 in good to excellent
yields. The six-membered cycloallyation products 1.113-1.114 were obtained in slightly
diminished yields. The authors observed that whereas enoates are not viable
pronucleophiles, thioenoates 1.112 work well. This transformation is remarkable in that it
merges both organic and transition metal catalysis by uniting nucleophilic features of the
Morita-Baylis-Hillman reaction with the electrophillic features of the Trost-Tsuji reaction.
22
R
O
n
Bu3P (100 mol%)
Pd(PPh)4 (1 mol%)
O
R
n
R
O
nBu3P
LnPd0
1.108 1.110-1.1141.109
MeO2CO
t-BuOH, 60 °C
R = Me, SEt, OEt, Ph, furyl
O O
EtS
O O O
O
1.110 1.111 1.112 1.113 1.114
92% 83% 73% 64% 66%
Scheme 1.26 Cycloallylation of enones using both phosphine and palladium catalysts
In 2005 Krafft and Haxell reported the first entirely organomediated
intramolecular variant of Krische’s cycloallylation reaction, where they utilized allylic
chlorides as electrophillic partners (Scheme 1.27). 41 This transformation is a two step
one-pot procedure for cycloallylation of enones that involves, conversion of the enone-
allylic acohol substrate 1.115 to an allylic chloride 1.116 using thionyl chloride followed
by addition of tributylphosphine catalyst to afford 5- and 6-membered ring
cycloallylation products 1.117-1.121 in good yields. Both mono- and disubstituted
alkenes are formed using this method with very good selectivity in the absence of
transition metal catalysts, however exogenous stoichiometric base is required to facilitate
the β-elimination step.
23
R1
O
n
SOCl2(200 mol%)
Et2O, 25 °C
O
R1
n
R1
O
n
1.115 1.117-1.1211.116
R2
R1 = Me, PhR2 = H, CH3
O
H3C
O O O O
1.117 1.118 1.119 1.120 1.121
82% 78%>10:1 E:Z
94%> 10:1 E:Z
75% 80%
OH ClR2 R2
PBu3 (100 mol%)
t-BuOH, 25 °C
KOH (200 mol%)
CH3 CH3
Scheme 1.27 Phosphine mediated cycloallylation of enones
1.5 Phosphine-Catalyzed/Mediated α-Alkylation of Enones
The classical Morita-Baylis-Hillman reaction (MBH) is an organocatalytic
transformation that encompasses coupling of activated alkenes and sp2 hybridized carbon
electrophiles such as aldehydes, α-keto esters, 1,2-diketones, aldimines, enoates, enones
and vinyl sulfones. Krafft and co-workers in 2005 reported the first organomediated
variant of the intramolecular MBH reaction involving alkyl halides as electrophiles, to
give the product of cycloalkylation (Scheme 1.28).42 In this reaction cycloalkylation of
enones is achieved in the presence of a stoichiometric amount of tributylphosphine in t-
BuOH at ambient temperature followed by addition of aqueous base under phase transfer
conditions, to afford both 5- and 6-membered ring products for example 1.123-1.126.
Remarkably, control experiments showed that tributylphosphine does not react with the
alkyl halide to form the phosphonium salt.
Having developed this synthetic method Krafft and co-worker turned their
attention to rendering it catalytic in phosphine, this was achieved by lowering the PBu3
24
catalyst loading to 20 mol% with minimal changes in reaction conditions.43 Phosphine-
catalyzed cycloalkylation of enones proceeds well to form both 5- and 6-membered
cycloalkylation products in excellent yields. The authors observed that PBu3 is the
optimal catalyst for 5-membered ring formation and PMe3 is the catalyst of choice for 6-
membered ring formation.
R1
OBr
n
O
R1
n1.122 1.123-1.126
R1 = H, Me, Ph, Alkyl
O
H3C
O O
H3C
O
1.123 1.124 1.125 1.12690% 81% 99% 80%
(i) PBu3 (100 mol%)t-BuOH, 25 °C
(ii) KOH, BnEt3NClCH2Cl2/H2O (1:1)
n = 1, 2
Scheme 1.28 Phosphine-mediated cycloalkylation of enones
Recently Krafft and Wright reported the first phosphine mediated MBH reaction
that utilizes epoxides as electrophiles (Scheme 1.29).44 This unprecedented reaction that
involves the use of epoxides in MBH reaction follows the usual mechanism where
conjugate addition of PMe3 to the enone gives rise to a Zwitterionic enolate that adds to
the epoxide. Subsequent alkoxide induced elimination of the phosphine gives the cyclic
homoaldol adducts 1.128-1.135. For good selectivity between endo and exo cyclization
onto the epoxide, substitution on the epoxide or the tether was necessary.
25
R1
O
n n1.127 1.128-1.135
R1 = Me, Ph
O
R1
O
R1
O
R1
O
1.128 R1 = Me, 67%1.129 R1 = Ph, 66%
PMe3 (100 mol%)
t-BuOH, 25 °C
R2 = H, Me
R2O
H3CCH3
OHOHH3C
R1OH
CH3
CH3
CH3
OH
1.130 R1 = Me, 43%1.131 R1 = Ph, 92%
1.132 R1 = Me, 60%1.133 R1 = Ph, 50%
1.134 R1 = Me, 76%1.135 R1 = Ph, 70%
R2
OH
R1
O
Scheme 1.29 Phosphine Mediated MBH reaction involving epoxide electrophiles
1.6 Phosphine Catalyzed Allylic Substution of MBH Acetates
In 2003 Krische and co-workers reported the first phosphine catalyzed reaction
for allylic amination of MBH acetates. 45 The MBH acetates undergo regioselective
allylic substitution in the presence of PPh3 and 4,5-dichlorophthalimide or phthalimide
through a tandem SN2′- SN2′ substitution mechanism to give products of N-allylation
(Scheme 1.30). By performing a survey of leaving group and pronucleophile
combinations the authors observed a dramatic dependence on the Δ pKa between the
conjugate acid of the leaving group and the pronucleophile vis-à-vis the generation of an
electrophile-nucleophile ion pair. If the leaving group is not basic enough, deprotonation
of the pronucleophile does not occur. Optimal yields were achieved using acetate as a
leaving group and 4,5-dichlorophthalimide as a pronucleophile. The allylic amination
products 1.138, 1.140, 1.142 and 1.144 were obtained in 73-95% (Scheme 1.31). Use of
phthalimide as pronucleophile gave the allylic amination products 1.137, 1.139 and 1.143
in low yields (18-20%). However, the reaction using methyl vinyl ketone derived MBH
26
acetate, which is a better electrophile was less sensitive to the nature of pronucleophile
and provided an excellent yield (92%) of the phthalimide derived amination product
1.141. All the products were obtained as single regioisomers presumably due to the
generation of the electrophile-nucleophile ion pair that enhances regio-retention by
suppressing direct addition of the nucleophile to the less substituted MBH acetate.
PR3 (20 mol%)R1 R2
EWGAcO
R1 R2
EWGNu
NuH = 4,5-Dichlorophthalimide (200 mol%)
R1 R2
EWG
R1 R2
EWGPR3 PR3
OAc Nu:
OAc + Nu-H HOAc Nu:+
ElectrophileLeaving GroupIon-Pair
ElectrophileNucleophileIon-Pair
Scheme 1.30 A plausible mechanism for phosphine-catalyzed allylic amination
27
R1
O
R2
OAc
R1
O
R2
NuPPh3 (20 mol%)
4,5-Dichlorophthalimide (200 mol%)or Phthalimide (200 mol%)
THF, 25°C
H3CO
O
H3CO
O
H3C
O
H3C
O N
CH3
NO2
CH3
O O
XX
NO O
XX
NO O
XX
NO O
XX
1.136 1.137-1.144
1.137, X = H, 8%1.138, X = Cl, 90%
1.139, X = H, 15%1.140, X = Cl, 73%
1.141, X = H, 92%1.142, X = Cl, 95%
1.143, X = H, 20%1.144, X = Cl, 86%
R1 = CH3, OCH3R2 = Ar, n-Pr
Scheme 1.31 Phosphine-catalyzed allylic amination of MBH acetates
The phosphine-catalyzed allylic substitution of MBH acetates was extended to
carbon nucleophiles by Krische and Cho in 2005. 46 In the presence of 2-
trimethylsilyloxy furan and a substoichiometric amounts of triphenylphosphine (20
mol%) MBH acetates 1.145 undergo regiospecific allylic substitution to afford the
products of C-allylation 1.146-1.149 in good to excellent yields, along with good regio
and diastereoselectivies (Scheme 1.32). The observed high diastereoselectivity in this
reaction can be rationalized by invoking a closed transition state arising from an endo-
selective Diels-Alder cycloaddition of the siloxyfuran ate complex with the enone
resulting from conjugate addition of the phosphine to the MBH acetate followed by
Grob-type fragmentation (Scheme 1.33). The observed high level of diastereoselectivity
in the products 1.146-1.149 indicates that the intermediate phosphine adducts forms as a
single enone geometrical isomer. The authors were able to control the absolute
stereochemistry of this transformation by using a chiral auxiliary approach, where a (-)-8-
28
phenylmenthol ester was used in place of a methyl ester which provided excellent yield
(87%) with control of the absolute stereochemistry.
R1
O
R2
OAc
R1
O
R2
THF, 25°C
H3C
O
H3C
O
H3CO
O
H3CO
O
CH3
NO2CH3
CH3
1.145
1.146a, 88%, >95:5 d.r.1.146b, 9%
1.147a, 63, 15%, >95:5 d.r.1.147b, 7%
1.148a, 62%, >95:5 d.r.1.148b, not observed
1.149a, 83%, 3.5:1 d.r1.149b, not observed
R1 = CH3, OCH3R2 = Ar, Cyclo-Pr, alkenyl
O O O O
O O O O
H H H HHH H H
O OTMS (200 mol%)
PPh3 (20 mol%)
O
O
HHR1
OO
O
R21.146a-1.149a 1.146b-1.149b
Scheme 1.32 Phosphine-catalyzed diastereoselective allylic substitution of MBH acetates
O OTMS
(200 mol%)R1
O
R2
OAc
PPh3 (20 mo%)
R1
O PPh3
R2 O OSiLn
PPh3
R1 OR2
O
LnSiO
HR1
O PPh3
R2
R1
O
R2
O
O
HH
addition via opentransition state
endo Diels-Alder[4+2] cycloaddition
Scheme 1.33 A plausible mechanism for the phosphine-catalyzed allylic alkylation of MBH acetates
29
1.7 Other phosphine-Catalyzed Reactions Involving Activated Alkenes
Evans and co-workers in 1978 reported a method for phosphonisilylation of α,β-
unsaturated carbonyl compounds in the presence of triphenylphosphine and silylating
agents.47 Inanaga et al have employed this transformation to generate phosphonium silyl
ketene acetals from allylic acrylates. The ketene acetal undergo Ireland-type [3,3]
rearrangement and subsequent deprotonation by a base to provide the product 1.151
(Scheme 1.34).48
O
R
OCy3P (10 mol%)
TESCl (3 eq)
DBU, MeCN
O
R
OTES
PCy3Cl
O
R
OTES
PCy3Cl
HO
R
O
R = H, Me, Cyclohexyl, Ar 66-87%
1.150 1.151
Scheme 1.34 Phosphine-catalyzed [3,3] rearrangement of allylic acrylates
Toste et al in 2003 reported a phosphine-catalyzed method for the hydration and
hydroalkylation of enones, enoates and nitriles.49 In this reaction addition of water and
alcohols to acyclic enones, enoates, and nitriles in the presence of trimethylphosphine
proceeds to provide hydration and hydroalkylation products 1.153-1.158 in good to
excellent yields 56-95% (Scheme 1.35). Attempts to hydrate and hydroalkylate cyclic
enones gave competitive dimerization products. It was also observed that whereas water,
primary, secondary and aryl alcohols added to methyl vinyl ketone, tert-butyl alcohol did
not. Based on these experiments, deuterium labeling, and 31P NMR experiments the
authors proposed a catalytic mechanism (Scheme 1.36). Conjugate addition of the
phosphine to the methyl vinyl ketone forms the phosphonium enolate A, which
30
deprotonates an alcohol molecule forming an alkoxide phosphonium ion pair B. The
alkoxide ion pair undergoes conjugate addition to another enone molecule resulting in
enolate ion pair C. Subsequent protonation of the enolate in C gives the desired
hydroalkylation product.
R1
EWG PMe3 (5 mol%)
R2OH R1
EWG
OR2
Me OR
1.153, R = H, 77%1.154, R = Me, 85%
H OR
O
Me
O
OEt
1.155, R = Me, 56%1.156, R = Ph, 59%
Me OMe
O
OMe
1.157, 71%
H
CN
OMe
1.158, 79%
R1 = H, Me, PhEWG = COMe, CO2Me, CNR2 = H, Me
1.152 1.153-1.158
Scheme 1.35 Phosphine-catalyzed hydration and hydroalkylation of activated alkenes
CH3
O
:PR3
CH3
O
R3P
HRO
CH3
O
R3PCH3
O
CH3
O
R3P
CH3
O
RO
CH3
O
RO
RO H
RO
A B
C Scheme 1.36 Proposed mechanism for hydration and hydroalkylation of activated alkenes
31
1.8 Summary and Outlook
In the phosphine-catalyzed cross Rauhut-Currier reaction the selectivity problem
has been addressed via an intramolecular process. However, there are no enantioselective
variants of this reaction reported in the chemical literature. The phosphine-catalyzed
Morita-Baylis-Hillman reaction has been extensively studied in the last two decades.
Asymmetric variants have been developed, however there are no highly enantioselective
phosphine catalyzed intramolecular MBH reactions. For the asymmetric intermolecular
MBH reaction high selectivity is only achieved using Lewis acidic co-catalysts such as
BINOL derivatives. There is potential for design of phosphine catalysts that would confer
high levels of asymmetry in both inter and intramolecular MBH reaction.
32
1.9 References 1 For reviews in the area of organocatalysis, see: Dalko, P. I.; Moisan, L. Angew. Chem. Int. Ed. 2001, 40, 3726. (b) Jarvo, E. R.; Miller, S. C.; Tetrahedron 2002, 58, 2481. (c) List, B. Tetrahedron 2002, 58, 5573. (d) Enders, D.; Grondal, C.; Huttl, M. R. M. Angew. Chem. Int. Ed. 2007, 46, early view, DOI: 10.1002/anie.200603129. 2 For reviews in the area of nucleophilic catalysis, see: (a) Basvaiah, D.; Rao, P. D.; Hyma, R. S. Tetrahedron 1996, 52, 8001. (b) Venkatesan, H.; Loitta, D.; Chemtracts, 1998, 11, 29. (c) Basavaih, D.; Rao, A. J.; Satyanarayana, T.; Chem. Rev. 2003, 103, 811. (d) Methot, J. L.; Roush, W. R.; Adv. Synth. Catal. 2004, 346, 1035. 3 Rauhut, M. M.; Currier, H.; (American Cyanamide Co.), U.S. Patent 3,074,999, 1963; Chem. Abstr. 1963, 58, 11224. 4 McClure, J. D (Shell oil Co.) U.S. Patent 3225083, 1965; Chem. Abstr. 1966, 64, 103655. 5 Baizer, M. M.; Anderson, J. D. J. Org. Chem. 1965, 30, 1357. 6 Morita, K.; Kobayashi, T.; Bull. Chem. Soc. Jpn. 1969, 42, 2732. 7 McClure, J. D. J. Org. Chem. 1970, 35, 3045. 8 For reviews on tertiary amine-catalyzed Rauhut-Currier reaction, see: (a) Amri, H.; Villieras, J. Tetrahedron Lett. 1986, 27, 4307. (b) Basavaiah, D.; Gowriswari, V. V.L.; Bharathi, T. K. Tetrahedron Lett. 1987, 28, 4591. (c) Drewes, S. E.; Emslie, N. D.; Karodia, N. Synthetic. Commun. 1990, 124, 1915. 9 Jenner, G. Tetrahedron Lett. 2000, 41, 3091. 10 (a) Wang L.-C.; Luis, A. L.; Agapiou, K.; Jang, H.-Y.; Krische, M. J. J. Am. Chem. Soc. 2002, 124, 2402. (b) Frank, S. A.; Mergott, D. J.; Roush, W. R. J. Am. Chem. Soc. 2002, 124, 2404. 11 Luis, A. L.; Krische, M. J. Synthesis 2004, 2579. 12 Thalji, R. K.; Roush, W. R. J. Am. Chem. Soc. 2005, 127, 16778. 13 Agapiou, K.; Krische, M. J. Org. Lett. 2003, 5, 1737. 14 (a) Mergott, J. L.; Frank, S. A.; Roush, W. R. Org. Lett. 2002, 4, 3157 (b) Methot, J. L.; Roush, W. R. Org. Lett. 2003, 5, 4223. (c) Mergott, D. J. Proc. Natl. Acad. Sci. USA, 2004, 101, 11955.
33
15 Morita, K.; Suzuki, Z.; Hirose, H. Bull. Chem. Soc. Jpn. 1968, 41, 2815. 16 Baylis, A. B.; Hillman, M. E. D. German Patent 2,155,113, 1972; Chem. Abstr. 1972, 77, 3417q. 17 Bode, M. L.; Kaye, P. T. Tetrahedron Lett. 1991, 32, 5611. 18 Imagawa, T.; Uemura, K.; Nagai, Z.; Kawanisi, M. Synth. Commun. 1984, 14, 1267. 19 Genski, T.; Taylor, R. J. K. Tetrahedron Lett. 2002, 43, 3573. 20 Rafel, S.; Leahy, J. W. J. Org. Chem. 1997, 62, 1521. 21 Hill, J. S.; Isaacs, N. S. J. Chem. Res. Synop. 1988, 330 22 Netherton, M, R.; Fu, G. C.; Org. Lett. 2001, 3, 4295. 23 (a) Yamanda, Y. M. A.; Ikegami, S. Tetrahedron Lett. 2000, 41, 2165. (b) Ito, H.; Takenaka, Y.; Fukunishi, S.; Iguchi, K. Synthesis 2005, 3035. (c) Shi, M.; liu, Y.-H. Org. Biomol. Chem. 2006, 4, 1468. 24 Roth, F.; Gygax, P.; Frater, G. Tetrahedron 1992, 33, 1045. 25 (a) Dinon, F.; Richards, E.; Murphy, P. J. Tetrahedron Lett. 1999, 40, 3279. (b) Richards, E. L.; Murphy, P. J.; Dinon, F.; Fratucello, S.; Brown, P. M.; Gelbrich, T.; Hursthouse, M. B. Tetrahedron, 2001, 57, 7771. 26 Keck, G. E.; Welch, D. S. Org. Lett. 2002, 4, 3687. 27 Yeo, J. E.; Yang, X.; Kim, H. J.; Koo, S. Chem. Commun. 2004, 236. 28 Teng, W. –D.; Huang, R.; Kwong, C. K.-W.; Shi, M.; Toy, P. H. J. Org. Chem. 2006 71, 368. 29 Buono, G.; Chiodi, O.; Wills, M. Synlett 1999, 377 30 Hayase, T.; Shibata, T.; Soai, K.; Wakatsuki, Y. Chem. Commun. 1998, 1271. 31 Li, W.; Zhang, Z.; Xiao, D.; Zhang, X. J. Org. Chem. 2000, 65, 3489. 32 (a) McDougal, N. T.; Schaus, S. E. J. Am. Chem. Soc. 2003, 125, 12094. (b) McDougal, N. T.; Trevellini, W. T.; Rodgen, S. A.; Kliman, L. T. Adv. Synth. Catal. 2004, 346, 1231.
34
33 Pereira, S. I.; Adrio, J.; Silva, A. M. S.; Carretero, J. C. J. Org. Chem. 2005, 70, 10175. 34 Bertenshaw, S.; Kahn, M. Tetrahedron Lett. 1989, 30, 2731. 35 (a) Shi, M.; Xu, Y.-M. Chem. Commun. 2001, 1876. (b) Shi, M.; Xu, Y.-M. Eur. J. Org. Chem. 2002, 696. (c) Zhao, L.-J.; He, H. S.; Shi, M.; Toy, P. H. J. Comb. Chem. 2004, 6, 680. (d) Shi, M.; Xu, Y.-M. J. Org. Chem. 2003, 68, 4784. (e) Xu, Y.-M.; Shi, M. J. Org. Chem. 2004, 69, 417. 36 Zhao, L.-J.; Kwong, C. K.-W.; Shi, M.; Toy, P. H. Tetrahedron 2005, 61, 12026. 37 ( a) Shi, M.; Zhao, G.-L. Tetrahedron Lett. 2002, 43, 4499. (b) Shi, M.; Zhao, G.-L. 2002, 43, 9171. (c) Shi, M.; Zhao, G.-L. Adv. Synth. Catal. 2004, 346, 1205. 38 (a) Shi, Y.-L.; Xu, Y.-M.; Shi, M. Adv. Synth. Catal. 2004, 346, 1220 (b) Shi, Y. –L.; Shi, M. Tetrahedron 2006, 62, 461. 39 (a) Shi, M.; Chen, L.-H. Chem. Commun. 2003, 1311. (b) Shi, M.; Chen, L.-H.; Li, C.-Q. J. Am. Chem. Soc. 2005, 127, 3790. (c) Shi, M.; Chen, L.-H. Pure Appl. Chem. 2005, 77, 2105.(d) Shi, M.; Chen, L.-H.; Teng, W.-D. Adv. Synth. Catal. 2005, 347, 1781. 40 Jellerichs, B. G.; Kong, J.-R.; Krische, M. J. J. Am. Chem. Soc. 2003, 125, 7758. 41 Krafft, M. E.; Haxell, T. F. N. J. Am. Chem. Soc. 2005, 127, 10168. 42 (a) Krafft, M. E.; Seibert, K. A.; Haxell, T. F. N.; Hirosawa, C. Chem. Commun. 2005, 5772. (b) Krafft, M. E.; Haxell, T. F. N.; Seibert, K. A.; Abboud, K. A. J. Am. Chem. Soc. 2006, 128, 4174. 43 Krafft, M. E.; Seibert, K. A. Synlett 2006, 3334. 44 Krafft M. E, Wright, J. A. Chem. Commun. 2006, 2977. 45 Cho, C.-W.; Kong, J.-R.; Krische, M. J. Org. Lett. 2004, 6, 1337. 46 Cho, C.-W.; Krische, M. J. Angew. Chem. Int. Ed. 2005, 43, 6689. 47 (a) Evans, D. A.; Hurst, K. M.; Takacs, J. M. J. Am. Chem. Soc. 1978, 100, 3467. (b) Kozikowski, A. P.; Jung, S. H. J. Org. Chem. 1993, 58, 299. 48 Hanamoto, T.; Baba, Y.; Inanaga, J. J. Org. Chem. 1993, 58, 299.
35
37
ENONES AND ENALS AS LATENT ENOLATES IN CATALYTIC C-C BOND FORMING PROCESSES: TOTAL SYNTHESIS OF (-)-
PAROXETINE (PAXIL®)
Chapter 2: Catalytic α-Arylation of Enones, Enals, Nitroalkenes and the Total Synthesis of (-)-Paroxetine (PAXIL®)
2.1 Introduction
The Krische research group has an ongoing program predicated on the utilization
of enones and enals as latent enolates. Enolate chemistry forms the cornerstone of
numerous classical transformations in organic synthesis, including the aldol and Michael
reactions.1,2 Seminal studies by Stork demonstrate that tandem enone reduction-enolate
alkylation is an effective method for regiospecific generation and trapping of the
thermodynamically less stable enolate isomer 2.2 in the decalin system relating to steroid
synthesis (Scheme 2.1).3 The use of chemically robust enones as latent enolates is a
promising alternative to the preformation of the more labile enols and enolates.
Subsequent to Stork’s report, catalytic methods for the activation of enones, which are
suited for reaction with a variety of electrophiles have been developed. These methods
are grouped in three categories: nucleophilic activation via conjugate reduction,
nucleophilic activation via conjugate addition of carbon nucleophiles, i.e.
carbometallative methods and nucleophilic activation via reversible conjugate addition of
N- or P-nucleophiles i.e. nucleophilic organocatalysis. This chapter is devoted to work
that encompass nucleophilic catalysis via conjugate addition of phosphine nucleophiles to
enones, enals, nitroalkenes, and application of this method in total synthesis of (-)-
paroxetine (PAXIL®).
38
O
R1
LiO
R1
O
R1Na/NH3
R2.1 2.2 2.3
H H
R-X
Scheme 2.1 Regiospecific enolate generation via enone reduction
Nucleophilic catalysis represents an important sub-class of organocatalytic
transformations.4 We have developed a family of catalytic transformations in the area of
phosphine catalysis, taking advantage of the unique reactivity of enolates generated via
phosphine conjugate addition to α,β-unsaturated carbonyl compounds.5 The phosphonium
enolates obtained via phosphine conjugate addition to α,β-unsaturated carbonyl
compounds have been trapped with classical electrophiles such as aldehydes, ketones and
activated alkenes. Non-classical electrophiles like arenes are potential coupling partners
for phosphonium enolates, though transition metal catalyzed enolate arylations are known,
this would be the first account of an organocatalytic enolate arylation.
2.1.1 Transition Metal-Catalyzed Enolate Arylation
Enolate nucleophiles rarely react with aromatic or vinylic halides, even though
numerous natural products, therapeutic agents, and synthetic intermediates posses an
aromatic unit at the α-position of a carbonyl group. In 1973, Semmelhack and co-workers
reported the first intramolecular nickel-catalyzed arylation of preformed ketone
enolates. 6 a Subsequently, Millard and Rathke discovered an intermolecular variant
involving nickel-catalyzed arylation and vinylation of preformed lithium enolates.6b In
1979, Fauvarque and Jutand reported a nickel and palladium-catalyzed arylation of the
Reformatsky enolates.6c Palladium-catalyzed coupling of preformed tin enolates and enol
39
silanes were reported following Fauvarque’s initial report.7 These reactions are limited in
substrate scope since they involve mainly acetates or methyl ketones. Ketone substrates
possessing β-hydrogens gave product of β-ketone arylation. Another drawback to these
methods is the requisite preformation of the enolate nucleophiles.
A plausible catalytic mechanism for the palladium catalyzed addition of enolates
to aryl halides is shown in Scheme 2.2. It is believed that the reaction proceeds via
oxidative addition of LnPd0 to the aryl halide to afford the organometallic intermediate A.
Transmetallation of the enolate nucleophile to Pd-complex A generates the
organometallic intermediates B or C. Finally, reductive elimination from the
intermediates B or C provides the arylation product and regenerates the LnPd0 catalyst.
LnPd0
PdII
X
ArLn
LnA
Ar-X
R
OMMX
PdIIArLn
LnPdII
O
ArLn
Ln
B CR
OR
R
O
Ar
R
OM+ Ar-X
LnPd0
R
O
Ar
Scheme 2.2 A plausible mechanism for Pd-catalyzed ketone arylation
40
In 1997, Buchwald, Hartwig and Miura reported concurrently the first palladium-
catalyzed reaction for direct coupling of ketones with arylbromides (Scheme 2.3).8 This
method requires a combination of Pd2(dba)3 and a phosphine ligand along with a
stoichiometric amount of a strong base. The products of α-arylation of ketones are
obtained in good to excellent yields; additionally this method is compatible with a wide
variety of functional groups including ethers, nitriles, imines, amides and acetals.
OR'R + Ar Br
Pd2(dba)3BINAP
NaOt-Bu, THF70 °C
OR'R
Ar55% -93%
2.4 2.5 2.6
R = Alkyl, ArylR' = Alkyl, Aryl
Scheme 2.3 Palladium-catalyzed direct α-arylation of ketones.
Buchwald and co-workers in 1998, reported the first catalytic asymmetric α-
arylation of ketones using homochiral BINAP as a ligand for palladium to afford
products with all-carbon quaternary centers.9a High chemical yields and enantioselectivity
were achieved by using increased Pd catalyst loading (10-20 mol%). This is a major
limitation to the synthetic utility of this reaction. This reaction was later improved by
using only 2 mol% Pd catalyst loading and MOP-type ligands in the presence of NaOt-Bu
at room temperature to afford aryl ketones in excellent yields.9b In 2001, Hartwig and Lee
used optically active heterocyclic carbene ligands for an intramolecular palladium
catalyzed amide arylation to afford α,α-disubstituted oxindole in modest
enantioselectivity.9c Later Buchwald reported a highly enantioselective (83-98% ee)
Ni(0)-catalyzed α-arylation of α-substituted γ−butyrolactones using chiral BINAP
ligands with aryl chlorides and bromides.9d
41
2.1.2 Enolate Arylation Using Triarylbismuth(V) Reagents
Seminal studies by Barton and co-workers involving oxidation of quinine to
quininone resulted in α-arylated quininone product, this experiment revealed that
bismuth(V) reagents10 such as Ph3BiCO3 can be utilized as arylating agents.11 Following
this result a variety of enolizable substrates have been arylated using a diverse range of
triarylbismuth(V) reagents (Scheme 2.4 eq 1).12 Selective monoarylation is difficult to
achieve in the case of 1,3–dicarbonyl compounds. Phenols can be C-arylated in the
presence of triarylbismuth(V) reagents under both basic and neutral conditions (Scheme
2.4, eq 2).13 Non-enolizable substrates could be arylated by first performing the enolates
followed by treatment with triarylbismuth(V) reagents to provide products of α-arylation
of carbonyl compounds (Scheme 2.4, eq 3 & 4).14 Enolates trapped as enol silane can be
readily arylated using tetraarylbismuth(V) fluoride reagents (Scheme 2.4, eq 4).
42
OCO2Et Ph3BiCO3
O
CO2EtPh
OH Ph3BiCO3
PhOH
73%
76%
OEt1) LDA/HMPA
PhOEt
O
H3C
63%
OSiMe3 O
Ph
92%
Ph4BiF
THF, -40 -25 °C
O
2) Ph3BiCl2
eq 1
eq 2
eq 3
eq 4
TMG
2.7a 2.7b
2.8a 2.8b
2.9a 2.9b
2.10a 2.10b
Scheme 2.4 Arylation of carbonyl compounds and phenols using bismuth(V) reagents
2.1.2.1 Mechanism for C-Arylation of Enolates Using Bismuth(V) Reagents
An intermediate containing a covalent Bi-O was invoked to explain the oxidation
of alcohols by bismuth(V) reagents. A similar covalent Bi-O containing intermediate was
proposed for C-arylation of phenols and enolates.12b-c The existence of the covalent Bi-O
bond was corroborated by isolation and characterization of the (aryloxy)bismuth
intermediate 2.12 from the reaction of the preformed anion of 3,5-ditbutylphenol 2.11
with tetramethylguanidine (TMG) and triphenylbismuth dichloride (Scheme 2.5).13a
Careful thermal decomposition of intermediate 2.12 provided the C-phenylated phenol
2.13 in 82% yield. The second step of the arylation is a reductive elimination which is
believed to proceed through a concerted mechanism, in which the π-electrons of the enol
attack the ipso-carbon of the Ar-Bi bond, initiating phenyl migration 2.15 (Scheme 2.6).15
43
t-But-Bu
OH Ph3BiCl2TMG
25 °C and -20 °CTHF
t-But-Bu
OBiPh3Cl
added to
toluenet-But-Bu
OHPh
82%2.11 2.12 2.13
Δ
Scheme 2.5 Isolation and decomposition of intermediates
ROM
Ph3BiCl2
RO
Bi
ClPh
PhR
OPh
R'R'R'
Ph2BiCl
2.14 2.15 2.16
Scheme 2.6 Proposed mechanism reductive elimination step
44
2.2 Catalytic α-Arylation of Enones and Enals Using Triarylbismuth(V)
Reagents
Transition metal-catalyzed enolate arylation6-9 by way of ketone, ester, and amide
pronucleophiles has received much attention however, general catalytic methods for
arylation of enones have not been described. 16 We have developed a method for
regiospecific α-arylation of enones and enals under conditions of nucleophilic catalysis.17
Cyclic enones and enals can be arylated upon exposure to 1 equivalent of Ar3BiCl2 and
Hünig’s base in the presence of a catalytic amount of tributylphosphine to afford α−aryl
enones and α−aryl enals in good to excellent yields.
A catalytic mechanism for this transformation is envisioned based on the
mechanistic studies by Barton and co-workers for arylation of alkali enolates (Scheme
2.7).13a Conjugate addition of tributylphosphine to the enone generates phosphonium
enolate A, which then adds to triarylbismuth(V) dichloride reagent to provide
intermediate B. Reductive elimination followed by β-elimination of tributylphosphine
affords the α-aryl enone. The feasibility of this phosphine-catalyzed enone α−arylation
using triarybismuth(V) reagents requires the compatibility of the Lewis basic
tributylphosphine and the Lewis acidic bismuth(V) reagent. Bismuth(V) reagents are
good oxidants, however we believe that oxidation of the bulky tributylphosphine should
be slower than aryl transfer.
45
Bu3P
Ar3BiCl2
Bu3PAr2BiCl
HCl
Ar3BiCl2
PBu3 (cat.)O
n
O
n
Ar
O
nPBu3
OBiAr3Cl
nPBu3Cl
A B
Scheme 2.7 Proposed catalytic mechanism for α−arylation of enones and enals
2.2.1 Optimization
To test the feasibility of this phosphine-catalyzed α−arylation of enones, 2-
cyclohexenone 2.17a (100 mol%) was exposed to Ph3BiCl2 (100 mol%) in the presence
of tributylphosphine (100 mol%) and Hünig’s base (100 mol%) at room temperature in
CH2Cl2 (1M) solvent. Gratifyingly, the product of α-arylation 2.17b was obtained in 87%
isolated yield as a single regioisomer as determined by 1H NMR analysis (Table 2.1,
entry 1). Upon decreasing the catalyst loading to 20 mol%, α-arylation product was
obtained in 85% yield, however the reaction time increased to 42 hours (Table 2.1, entry
2). With the knowledge that t-BuOH as a solvent enhances the rate in the Morita-Baylis-
Hillman reaction, it was speculated that t-BuOH might be a good solvent for this reaction,
however attempts to run the reaction in this solvent gave a modest 67% yield of the
desired product (Table 2.1, entry 4). This low yield could be attributed to the poor
solubility of triphenylbismuth dichloride in t-BuOH. Finally, using a mixed solvent
system of CH2Cl2 and t-BuOH (9:1) gave the α-arylation product 2.17b in 93% yield
46
with a significant decrease in reaction time (Table 2.1, entry 5). These conditions served
as the standard condition for this transformation.
Table 2.1 Optimization table for α-arylation of enones
O PBu3Ph3BiCl2
(i-Pr)2NEt (100 mol%)
O
Solvent
Entry Ph3BiCl2(mol%)
PBu3(mol%)
Solvent(1M)
Time(hr)
Temp( °C)
Yield(%)
1
2
3
4
5
100
100
100
100
100
26
42
36
24
13
CH2Cl2
CH2Cl2
EtOAc
t-BuOH
CH2Cl2/t-BuOH(9:1)
100
20
20
20
20
25
25
25
40
25
87
85
48
67
93
2.17a 2.17b
2.2.2 Substrate Scope
To probe the substrate scope of this transformation, a variety of triarylbismuth(V)
dichlorides were prepared by treating ArMgBr with BiCl3 followed by oxidation of the
resulting triarylbismuth(III) compounds with chlorine gas or sulfuryl chloride (SO2Cl2).18
Under our standard conditions, the catalytic α-arylation of 2-cyclohexenone 2.17 (Table
2.2) and 2-cyclopentenone 2.18 (Table 2.3) were performed. The formation of α-
arylation products 2.17b-2.17e and 2.18b-2.18e demonstrates that transfer of aryl groups
from para-substituted triarylbismuth dichlorides proceeds readily and in good yields
(Tables 2.2 and 2.3). The ability to transfer bromo-substituted arenes illustrates the
functional group tolerance of this methodology compared to nickel or palladium-
catalyzed enolate arylation methods. The formation of α-arylation products 2.17f-2.17h
47
and 2.18f-2.18h shows that meta-substituted aryl groups transfer efficiently, even in the
case of the electron rich methoxy-substituted systems. Unfortunately, para-
methoxyarenes gave trace amount of product. This could be attributed to the strong π-
donating effect of the methoxy moiety, which reduces the Lewis acidity of the
triarylbismuth dichoride. Transfer of disubstituted arenes is achieved effectively as
demonstrated by the formation of α-arylation products 2.17i and 2.18i.
Table 2.2. Phosphine-catalyzed α-arylation of 2-cyclohexenone using Ar3BiCl2 reagents
PBu3 (20 mol%)Ar3BiCl2 (100 mol%)
2.17a, 93% 2.17b, 44% 2.17c, 66%
O O
O O O
2.17d, 80% 2.17e, 71% 2.17f, 76%
O O O
Ar
CH3 F
Cl
F
(i-Pr2NEt (100 mol%)CH2Cl2-t-BuOH (9:1)
25 oC2.17 2.17a -2.17f
2.17g, 67% 2.17h, 65% 2.17i, 75%
O O O
CF3OCH3
F
Br
CH3
48
Table 2.3. Phosphine-catalyzed α-arylation of 2-cyclopetenone using Ar3BiCl2 reagents
PBu3 (20 mol%)Ar3BiCl2 (100 mol%)
(i-Pr2NEt (100 mol%)CH2Cl2-t-BuOH (9:1)
25 oC
2.18a, 70% 2.18b, 62% 2.18c, 79%
O OAr
O O O
2.18d, 75% 2.18e, 80% 2.18f, 73%
O O O
CH3 F
Cl
F
2.18 2.18a-2.18f
2.18g, 85% 2.18h, 72% 2.18i, 89%
O O O
CF3OCH3
F
Br
CH3
To further explore the substrate scope of this transformation, we screened a
variety of acyclic enones. Experiments revealed that α,β-unsaturated pronucleophiles
need substitution at the β-position to attenuate competitive anionic polymerization.
Attempts to α-arylate acylic enones gave trace amount of the desired product, leading to
the speculation that reactive pronucleophiles must achieve an s-trans conformation. For
example cyclic enones such as 2-cyclohexenone and 2-cyclopentenone which are reactive
pronucleophiles are locked in the s-trans conformation. To test our hypothesis, we
examined the α-arylation of β-substituted enals such as crotonaldehyde which exist
predominantly in the s-trans-conformation. Gratifyingly, crotonaldehyde 2.19
participates in the α-arylation to provide α-arylated enals 2.19a-2.19d in modest to good
49
yields (Table 2.4) under standard conditions though two equivalents of crotonaldehyde
must be employed. The stereochemical assignment was based on 1H NMR of previously
reported material for 2.19a,53 the diagnostic vinylic proton was observed at 6.7 ppm as
reported in literature for the E-isomer.
Table 2. 4. Phosphine-catalyzed α-arylation of crotonaldeyde using Ar3BiCl2 reagents
PBu3 (20 mol%)Ar3BiCl2 (100 mol%)
i-Pr2NEt (100 mol%)CH2Cl2-t-BuOH (9:1)
25 oC
2.19a, 61% 2.19b, 49%
O
2.19c, 70% 2.19d, 54%
CH3
F
F
2.19 2.19a-2.19d
H
CH3
O
H
CH3
Ar
H
CH3
O
H
CH3
O
H
O
CH3 CH3
O
H
(200 mol%)
50
2.3 Catalytic α-Arylation of Nitroalkenes Using Triarylbismuth(V) Reagents The α,β-unsaturated nitroalkenes are useful and versatile synthetic intermediates
in organic chemistry. 19 The electron deficient nature of nitroalkenes facilitates their
application in the Diels-Alder reaction as dienophiles 20 and in conjugate addition
chemistry as Michael acceptors.21 In addition to these applications, the nitro group can be
easily converted to a variety of functional groups including aldehydes, ketones, oximes,
nitrones, hydroxylamines, and amines.19b-c, 22 Historically, nitroalkenes are known for
their biological activity as insectides, 23 fungicides, 24 antibacterials, 25 and antitumor
agents.26 Inspired by the versatility and the biological importance of nitroalkenes, we
focused our attention to the arylation of nitroalkenes in an effort to extend the scope of
our phosphine-catalyzed regiospecific α-arylation methodology.17
2.3.1 Optimization
To assess the feasibility of utilizing nitroalkenes, as pronucleophiles, β-
nitrostyrene 2.20a (100 mol%) was exposed to Ph3BiCl2 (110 mol%) and Hünig’s base
(100 mol%) in the presence of tributylphosphine (20 mol%) at room temperature in THF.
Gratifyingly, the α-arylation product 2.20b was obtained in 50% isolated yield as a single
alkene isomer, as determined by 1H NMR analysis, where the vinylic proton is observed
at 8.23 ppm for the E-isomer and literature reports 8.25ppm.59a and melting point 72-73
°C, Lit.59b is 74 °C (Table 2.5, Entry 1). Under otherwise identical conditions, but
doubling the loading of Ph3BiCl2 led to an increase in yield of 2.20b to 56% (Table 2.5,
Entry 2). Upon changing the solvent to EtOAc, 2.20b was obtained in 14%, isolated yield
51
(Table 2.5, Entry 3). This is attributed to the poor solubility of Ph3BiCl2 in EtOAc.
Performing the reaction at 50 °C improved the solubility of Ph3BiCl2, resulting in a 67%
yield of 2.20b with a significant shortening of the reaction time. (Table 2.5, Entry 4).
Efforts to further optimize this reaction by varying concentration and reaction
temperature did not result in any improvement in chemical yield (Table 2.5, Entries 5-7).
These reaction conditions represent our standard conditions for α-arylation of
nitroalkenes (Table 2.5, entry 4).
Table 2.5 Optimization table for α-arylation of Nitroalkenes
Ph
NO2
Ph
NO2PhPBu3 (20 mol%)Ph3BiCl2 (mol%)
Solvent (Conc.)Temp °C
(i-Pr)2NEt (100 mol%)
Entry Solvent (Conc.) Temp °C %Yield
2
3
THF (0.5M)
EtOAc (0.5M)
EtOAc (0.5M)
25
25
50
42
48
3
56
14
67
Ph3BiCl2 (mol%)
200
200
2004
EtOAc (1M) 50 2 652005
1 THF (0.5M) 25 36 50110
Time (h)
6 EtOAc (0.2M) 200 50 12 65
7 EtOAc (0.5M) 200 70 2 62
2.20a 2.20b
2.3.2 Substrate Scope
Under our standard conditions, the catalytic α-arylation of aromatic nitroalkenes
was explored using diverse triarylbismuth(V) dichlorides. β-Nitrostyrene 2.20a
undergoes α-arylation readily to provide products 2.20b-2.20e in good yield (Table 2.6).
As demonstrated by the formation of α-arylation products 2.20c-2.20e para, meta and
52
disubstituted triarylbismuth(V) dichlorides transfer aryl groups efficiently, even when the
α,β-unsaturated pronucleophile bears an electron rich methoxy- and methyl substituents.
The α-arylation of p-methoxy-β-nitrostyrene 2.21a proceeds efficiently to provide
products 2.21b-2.21d in good yields and as single alkene isomer (Table 2.6). As shown
by product 2.22b o-bromo-β-nitrostyrene 2.22a undergoes α-arylation effectively.
Notable is the transfer of the bromo substituted aryl group as illustrated by formation of
2.21b, which would be problematic under the conditions of palladium catalysis.
Table 2.6 Phosphine catalyzed α-arylation of aromatic nitroalkenes using
triarylbismuth(V) reagents.
. To further probe the scope of this transformation we synthesized heteroaromatic
nitroalkenes containing furyl, indolyl, and pyrolyl moieties, via Henry reaction using the
Ar
NO2
Ar
NO2Ar'PBu3 (20 mol%)Ar'3BiCl2 (200 mol%)
EtOAc (0.5M)50 °C
(i-Pr)2NEt (100 mol%)
NO2 NO2
F
2.20b, 67% 2.20c, 74%
NO2
F
MeO
2.21c, 76%
NO2
Br
MeO
NO2
Br
2.22b, 63%2.21b, 61%
NO2
MeO
2.21d, 69%
H3C
NO2
2.20d, 68%
NO2
F
2.20e, 64%
MeO Me
2.20b-2.22b2.20a,= Ph2.21a,= p-MeOPh2.22a,= o-BrPh
53
corresponding aldehydes and nitromethane. Arylation of these heteroaromatic
nitroalkenes 2.23a-2.25a proceed effectively to provide products of α-arylation 2.23b-
2.25c in good yields as a single alkene isomer as determined by 1H NMR analysis (Table
2.7).
Table 2.7 Phosphine catalyzed α-arylation of hetero-aromatic nitroalkenes using
triarylbismuth(V) reagents.
Ar
NO2
Ar
NO2Ar'PBu3 (20 mol%)Ar'3BiCl2 (200 mol%)
EtOAc (0.5M)50 °C
(i-Pr)2NEt (100 mol%)
NO2
F
2.24b, 72%
O
NO2
F
TsN
2.25b, 69%
NO2
N
2.23b, 78%
CH3
NO2
2.23c, 67%
NCH3
Br
NO2
N
2.23d, 51%
CH3
H3C
NO2
F
TsN
2.25c, 74%
H3C
2.23b-2.25c2.23a, Ar = 2-Pyrolyl2.24a, Ar = 3-Furyl2.25a, Ar = 3-Indolyl
54
2.4 Application of the Phosphine-Catalyzed Enone α-Arylation in
Formal and Enantioselective Total Synthesis of Paroxetine (PAXIL®)
In the previous sections we described the development of a catalytic method for
the regiospecific α-arylation of enones, enals, and nitroalkenes wherein transiently
generated (β-phosphino)enolates or oxaphospholenes are captured by arylbismuth(V)
reagents. The scope of this process complements the corresponding palladium catalyzed
enolate arylations, as strongly basic reagents are not required for enolate generation and
the use of enones as enolate precursors enables regiospecific enolate generation.8,9 Here,
the synthetic utility of the phosphine-catalyzed enone α-arylation is highlighted through
its strategic use in a concise formal and enantioselective total syntheses of the
blockbuster antidepressant (-)-paroxetine (PAXIL).
Paroxetine, a GlaxoSmithKline product marketed as Paxil/Seroxat, is an
enantiomerically enriched trans-3,4-disubsituted piperidine used for the treatment of
depression, obsessive compulsive disorder, and panic disorder.27 As one of the leading
prescription drugs worldwide, paroxetine has received considerable attention from
synthetic chemists, evoking a surprisingly diverse array of strategies for its asymmetric
synthesis. To date, approaches to the asymmetric synthesis of paroxetine encompass the
physical resolution of racemates, 28 enzyme catalyzed asymmetric transformations, 29
chiral auxiliary based approaches, 30 asymmetric deprotonation using chiral bases, 31
catalytic enantioselective transformations,32 as well as the use of naturally occurring
chiral starting materials.33
55
Due to the large number of reported prior synthesis of PAXIL, we will discuss the
GlaxoSmithKline synthesis29c,e (Scheme 2.8) and the shortest enantioselective synthesis
reported by Jacobsen group.32 The GlaxoSmithKline synthesis is 13 linear steps featuring
an enzymatic resolution of the prochiral diester 2.26 to provide intermediate 2.27. This
intermediate has been elaborated to amino alcohol 2.28 in 6 steps and 2.28 was converted
to paroxetine hydrochloride in 3 steps.
F
O
OMe
MeO
OPig LiverEsterasepH = 737 °C
F
O
OH
MeO
O
F
NBn
HO
6-Steps
3-Steps
NH
F
O
O
O
Paroxetine
2.26 2.27 2.28
Scheme 2.8 GlaxoSmithKline synthesis
56
NH
O
F
Ph
ONC CO2CH3
[S, S]-A (5 mol%)
t-BuOH (1.2 equiv) Cyclohexane
94%, 96%
F
NC
CO2CH3H
NH
O
Ph
O4-Steps
NBoc
F
HO
3-Steps
NH
F
O
O
O
·HCl
N N
O OAl
t-Bu
t-Bu t-Bu
t-Bu[S,S]-A
2.29 2.30 2.31
Paroxetine hydrochloride
Scheme 2.9 Jacobsen’s synthesis
The shortest enantioselective synthesis was reported by Jacobsen and co-workers
in 2003.32 This synthesis employs an enantioselective Michael addition of a nitrile to an
aryl substituted α,β-unsaturated imide 2.29 in the presence of the catalyst Salen-Al
complex [S,S]-A to provide intermediate 2.30 in excellent yields and excellent
enantioselectivity after recrystalization (Scheme 2.9). The intermediate 2.30 was
transformed to the amino alcohol 2.31 in 4 steps, and 2.31 was converted to paroxetine
hydrochloride in 3 steps. This is an expeditious way for asymmetric synthesis of PAXIL
(8 steps), however it involves an epimerization step which makes it less attractive.
Our objective is to show case the synthetic application of our enone arylation
methodology. Another goal is to improve on the exist methods for asymmetric synthesis
of PAXIL. We hope to cut the number of steps in the GlaxoSmithKline syntheis by half,
thus providing the shortest enantioseletive synthesis.
57
2.4.1 Retrosynthetic Analysis
Retrosynthetically, paroxetine is envisioned to derive from N-benzylaminoalcohol
2.28, which could be obtained from α-arylated dihydropyridinone 2.33a via 1,4 reduction
followed by Wittig olefination, hydrolysis and carbonyl reduction. The α-arylated
dihydropyridinone 2.33a would arise from dihydropyridinone 2.32 via phosphine-
catalyzed α-arylation (Scheme 2.10).
HN
FOO
O
N
FHO
BnN
OF
BnN
O
Bn(-)-Paroxetine
cat. PBu3
(p-F-Ph)3BiCl2
2.28 2.33a 2.32
Scheme 2.10 Retrosynthetic analysis of (-)-paroxetine
2.4.2 Formal Synthesis of (±)-Paroxetine (PAXIL®)
The forward synthesis begins with dihydropyridinone 2.32 which is prepared
from commercially available N-benzyl glycine ester in 3 steps.34 With dihydropyridinone
2.32 in hand, its ability to participate in the phosphine catalyzed α-arylation was
examined (Scheme 2.11). Upon exposure to (p-F-Ph)3BiCl2 (100 mol%), catalytic
tributylphosphine (20 mol%), and Hünig’s base (100 mol%) at room temperature in
CH2Cl2–t-BuOH (9:1) solvent, aryl transfer proceeds readily to give α-arylated
dihydropyridinone 2.33a in 79% isolated yield as a single regioisomer, based on 1H NMR
analysis.
58
PBu3 (20 mol%)(p-F-Ph)3BiCl2 (100 mol%)
i-Pr2NEt (100 mol%)CH2Cl2-t-BuOH (9:1)
25 oCN
O
BnN
O
Bn
F
79%2.32 2.33a
Scheme 2.11 Catalytic α-arylation of dihydropyridinone 2.32
Elaboration of α-aryldihydropyridinone 2.33a to N-benzylamino alcohol 2.28, a
common intermediate in synthesis of paroxetine, is achieved in 4 manipulations. L-
Selectride reduction35 of 2.33a occurs in 87% yield to provide the N-benzylamino ketone
2.34a. Wittig olefination of N-benzylamino ketone 2.34a affords enol ether 2.35 in 65%
yield with single olefin geometry as determined by 1H NMR. Acid hydrolysis of 2.35
followed by NaBH4 reduction of the resulting aldehyde provides the N-benzylamino
alcohol 2.28 in 63% yield as a single stereoisomer. N-benzylamino alcohol 2.28 exhibits
spectral properties identical in all aspects as previously reported material, which has been
converted to paroxetine in 2 steps.28i,29e,31b,c,33 Thus, the synthesis of 2.28 represents a
formal synthesis of (±)-paroxetine (Scheme 2.12).
N
OF
Bn
aN
OF
BnN
F
Bn
MeO
b
c, d
N
F
Bn
HO
HN
FOO
O2 steps
Conditions: (a) L-Selectride, THF, -78 °C, 87% (b) Ph3PCH2OMe Cl, NaHMDS,THF, 0 °C, 65%(c) 0.1M H2SO4, THF, 50 °C (d) NaBH4, EtOH, 25 °C, 63% over 2 steps.
2.33a 2.34a 2.35
2.28 (±)-Paroxetine
Scheme 2.12 Conversion of α-aryl dihydropyridinone 2.33a to (±)-paroxetine
59
2.4.3 Enantioselective Total Synthesis of (-)-Paroxetine (PAXIL®)
Having completed a formal racemic synthesis of paroxetine, efforts were focused
on an enantioselective total synthesis. Here, a potentially effective strategy involves
asymmetric protonation36,37 of enol silanes 2.36a or 2.36b, which are derived in a single
manipulation from enones 2.33a and 2.33b by way of conjugate reduction with trapping
of the resulting enolate in situ using trimethylsilyl chloride or tert-butyldimethylsilyl
chloride, respectively.35 However, enol silane 2.36a did not react upon exposure to
Yamamoto’s BINOL-SnCl4 reagent,36a-c perhaps due to the presence of the Lewis basic
N-benzyl amine. Treatment of the carbamoyl-protected enol silane 2.36b to the BINOL-
SnCl4 reagent gave the desired α-arylketone 2.34b in 80% yield, but with very low levels
of optical enrichment (10% ee). Yanagisawa’s recently reported silver fluoride catalyzed
asymmetric protonation gave a more promising result, providing the α-arylketone 2.34b
in 90% yield and 39% ee (Scheme 13).36d
RN
OF
R1N
(R2)3SiOF
2.36a, (R1 = Bn, R2 = TBS)2.36b, (R1 = CO2Me, R2 = TMS)
a 2.33a, R = Bn2.33b, R = CO2Me
R1N
OF
2.34a, (R1 = Bn)2.34b, (R1 = CO2Me)
b c
Conditions: (a) MeOCOCl, CH2Cl2, 25 °C, 86%. (b) Li(s-Bu)3BH, THF, -78 °C, then R3SiCl, 74%(TBSCl) and 86% (TMSCl). (c) AgF (cat.), (R)-BINAP (cat.), CH2Cl2:MeOH (20:1), 90%, 39% ee (refers to the conversion of 2.36b to 2.34b).
Scheme 2.13 Attempted asymmetric protonation of enol silanes 2.36a and 2.36b
60
The difficulties encountered in preparing optically enriched aminoketones 2.34a
or 2.34b led us to consider alternative synthetic routes. Accordingly, oxazaborolidine-
catalyzed asymmetric 1,2-reduction of enones 2.33a and 2.33b was explored.38 The N-
benzyl protected enone 2.33a gave the corresponding allylic alcohol 2.37 in 35% yield
and 70% ee (Scheme 2.14). It was speculated that the presence of the Lewis basic N-
benzyl amine of 2.33a was incompatible with the Lewis acidic oxazaborolidine catalyst,
resulting in diminished yields and selectivities.
BnN
OF
BnN
OHF(10 mol%)
BH3·SMe2 (60 mol%)CH2Cl2
35%, 70 ee
N B
H PhPh
Me
2.33a 2.37
Scheme 2.14 Oxazaborolidine reduction of 2.33a
Gratifyingly, oxazaborolidine-catalyzed asymmetric 1,2-reduction of the
corresponding N-carbamoyl protected enone 2.33b provides allylic alcohol 2.38 in 95%
yield and 96% enantiomeric excess (Scheme 2.15). Allylic alcohol 2.38 was converted to
the diphenyl phosphate 2.39 and was subjected to conditions for anti-selective copper-
mediated SN2′ allylic substitution39 using (i-PrO)Me2SiCH2MgCl as a hydroxymethyl
anion equivalent.40 The resulting homoallylic silane 2.40 was obtained in 96% yield, and
was subjected to Tamao oxidation to provide the homoallylic alcohol 2.41 in 70% yield.
As revealed by chiral stationary phase HPLC analysis, compound 2.41 is obtained in 92%
enantiomeric excess. The high fidelity of chirality transfer supports the anti-SN2'
61
mechanism for allylic substitution and the slight decrease in enantiomeric excess is
attributed to competitive SN2 substitution.
MeO2CN
OF
MeO2CN
OHF
MeO2CN
F
2.33b
a b
SiMe2(i-PrO)
2.40
MeO2CN
OF(PhO)2P
O
2.38 2.39
c d
MeO2CN
F
OH
2.41
Conditions: (a) (S)-Me-CBS (cat), BH3·SMe2, CH2Cl2, -20 °C, 95%, 96% ee. (b) (PhO)2P(O)Cl, DMAP (cat.), Pyr, CH2Cl2, 25 °C, 89%. (c) (i-PrO)Me2SiCH2Cl, Mg, 25 °C, then CuCN, THF,-30 to 0 °C, 96%. (d) KF, H2O2, DMF, 25 °C, 70%, 92% ee.
Scheme 2.15 Conversion of enone 2.33b to homoallylic alcohol 2.41
Stereoselective substrate-directed catalytic homogeneous hydrogenation of the
homoallylic alcohol 2.41 was accomplished using Crabtree’s conditions41,42 to provide
the corresponding saturated alcohol 2.42 in 69% yield as a single diastereomer as
determined by 1H NMR analysis (Scheme 2.16). The alcohol was converted to the
phenolic ether 2.43 in 76% yield through its reaction with sesamol under Mitsunobu
conditions. 43 Finally, deprotection of methyl carbamate was achieved under basic
conditions,44 and the amine was isolated as its HCl salt to provide (-)-paroxetine as
hydrochloride salt in 92% yield. (-)-Paroxetine hydrochloride obtained in this manner
exhibits spectral properties identical in all respects to previously reported material
(Scheme 2.16).28-33
62
c
HN
FOO
O
(-)-Paroxetine
aMeO2CN
F
2.41
Conditions: (a) [Ir(COD)(PCy3)Pyr]PF6, CH2Cl2, 25 °C, 69%. (b) DIAD, PPh3, sesamol, THF, 0 to 50 °C, 76%. (c) KOH, (HOCH2)2, 100 °C, then HCl, 92%.
HO
MeO2CN
F
2.42
HO
bMeO2CN
F
2.43
OO
O
·HCl
Scheme 2.16 Enantioselective total synthesis of (-)-paroxetine
2.3.5 Attempted Concise Route to (-)-Paroxetine
A more concise approach to (-)-paroxetine is potentially achieved via direct anti-
selective copper-mediated SN2′ allylic substitution using a sesamol-based phenoxymethyl
anion. Stimulated by this prospect, the tributylstannylmethyl ether was prepared from
sesamol and tributyl(iodomethyl)stannane. 45 Allylic substitution using the
phenoxymethyl anion derived cuprate with allylic phosphate 2.33c gave the desired
phenolic ether in 27% yield. This low yield is attributed to the instability of the
intermediate α-alkoxy organolithium reagent and the resulting organocuprate with
respect to α-elimination, as evident by the recovery of sesamol. Hence, this strategy was
not implemented in the synthesis of (-)-paroxetine (Scheme 2.17).
63
CbzN
ORF
b
c 2.44, R = H2.45, R = PO(OPh)2
46
RN
OF
a 2.33a, R = Bn2.33c, R = CO2Bn
CbzN
FOO
O
Conditions: (a) BnOCOCl, CH2Cl2, 25 °C, 89%. (b) NaBH4, CeCl3·7H2O, CH3OH, 25 °C, 76%.c) (PhO)2P(O)Cl, DMAP (cat.), Pyr, CH2Cl2, 25 °C, 86%. (d) Ar-OCH2SnBu3, BuLi, THF, -78 °C, then CuBr·SMe2, THF, -78 to -10 °C, 27%.
d
Scheme 2.17 Attempted concise approach to (-)-paroxetine
2.5 Summary and Concluding Remarks
Cylic enones, β−substituted enals, and aromatic nitroalkenes undergo
regiospecific α-arylation under the conditions of nucleophilic catalysis using
triarylbismuth(V) dichlorides. This transformation is a regiochemical complement to
Heck arylation. The preservation of the alkene moiety in the product facilitates further
functionalization of the arylated products. The drawbacks to this method include the
transfer of only one aryl group from the triarylbismuth(V) reagent, inability to transfer
ortho-substituted arenes, and diminished yields on transferring electron rich aryl groups.
This method has been strategically applied in a concise formal and enantioselective total
synthesis of the antidepressant (-)-paroxetine (PAXIL). Future studies will focus on the
invention of related reagents for efficient aryl, heroaryl, and alkyl transfer under the
conditions of nucleophilic catalysis.
64
2.6 Experimental Section
General
All reactions were run under an atmosphere of argon, unless otherwise indicated.
Anhydrous solvents were transferred by an oven-dried syringe. Flasks were oven-dried
and cooled under a stream of argon. Tetrahydrofuran (THF) was distilled from
sodium/benzophenone ketyl. Dichloromethane was distilled from calcium hydride.
Methanol (MeOH) was distilled from magnesium turnings and iodine. Ethyl acetate was
distilled from magnesium sulfate. Tributylphosphine was distilled at reduced pressure
and stored under inert atmosphere. Other solvents and chemical reagents obtained from
commercial sources were used without further purification, unless otherwise noted.
Triarylbismuth dichloride reagents were prepared according to literature procedure.18 All
known products exhibited spectral properties consistent with literature reports 2.17a,46
2.17b, 47 2.17h, 48 2.18a, 49 2.18b, 50 2.18c, 51 2.18d, 52 2.19a, 53 2.19b, 54 and nitroalkenes
2.21a-2.25a were prepared according to reported literature procedures 2.21a-2.22a,55
2.23a,56 2.24a,57 and 2.25a.58The arylation product 2.20b exhibited spectral properties
consistent with previously reported data. 59 Dihydropyridinone 2.32 was prepared from N-
benzyl glycine ethyl ester according to literature procedures.34 The E/Z product ratios
were determined by proton nuclear magnetic resonance (1H NMR). Analytical thin-layer
chromatography (TLC) was carried out using 0.2-mm commercial silica gel plates (DC-
Fertigplatten Krieselgel 60 F254). Preparative column chromatography employing silica
gel was performed according to the method of Still.60 Melting points were determined on
a Thomas-Hoover melting point apparatus in open capillaries and are uncorrected.
65
Infrared spectra were recorded on a Perkin-Elmer 1420 spectrometer. High-resolution
mass spectra (HRMS) were obtained on a Karatos MS9 and are reported as m/e (relative
intensity). Accurate masses are reported for the molecular ion (M+1) or a suitable
fragment ion.
Proton nuclear magnetic resonance (1H NMR) spectra were recorded with a
Varian Gemini (300 MHz) spectrometer and a Mercury (400 MHz) spectrometer.
Chemical Shifts are reported in delta (δ) units, parts per million (ppm) downfield from
trimethylsilane. Coupling constants are reported in Hertz (Hz). Carbon-13 nuclear
magnetic resonance (13C NMR) spectra were recorded with a Varian Gemini 300 (75.5
MHz) spectrometer and a Mercury 400 (100 MHz) spectrometer. Chemical shifts are
reported in delta (δ) units, parts per million (ppm) relative to the center of the triplet at
77.00 ppm for deuteriochloroform. 13C NMR spectra were routinely run with broadbrand
decoupling.
Representative Procedure for α-Arylation of Enones 2.17-2.18 and Enal 2.19
To a reaction vessel charged with triphenylbismuth dichloride (261 mg, 0.52
mmol, 100 mol%) and 2-cyclohexen-1-one 2.17 (50µL, 0.52 mmol, 100 mol%) was
added CH2Cl2-t-BuOH (9:1 ratio, 0.52 mL, 1M), followed by diisopropylethylamine
(90µL, 0.52 mmol, 100 mol%) and tributylphosphine (25µL, 0.10 mmol, 20 mol%). The
reaction mixture was allowed to stir at room temperature until complete consumption of
triphenylbismuth dichloride was observed by TLC (2-12 hours), at which point the
reaction mixture was evaporated onto SiO2. Purification by silica gel chromatography
hexane/ethyl acetate 9:1 gave 2.17a (0.083g, 93%) as a white solid.
66
Representative Procedure for α-Arylation of Nitroalkenes 2.20a-2.25a
To a clean dry 13 X 100 test tube charged with β-nitrostyrene 2.20a (50mg, 0.33
mmol, 100 mol%) and Ar3BiCl2 (0.35g, 0.67 mmol, 200 mol%) was added EtOAc (0.7
mL, 0.5M), followed by tributylphosphine (17μL, 0.067 mmol, 20 mol%) and
diisopropylethylamine (60 μL, 0.33 mmol, 100 mol%). The reaction vessel was place into
a preheated oil bath (50 °C) and the reaction was allowed to stir at this temperature until
complete consumption of the starting material was observed by TLC analysis (3h). The
reaction vessel was removed from the heating oil bath and allowed to cool to room
temperature, at which point a solution of 50% aqueous Na2CO3 (2 mL) was added and
allowed to stir for 10 min, this step enables conversion of excess Ph3BiCl2 to the more
polar and insoluble Ph3BiCO3 which can easily isolated. The resulting mixture was
filtered through celite, washed three times with Et2O (5 mL), the filtrate was extracted
with Et2O (3 X 5 mL), the organic extracts were combined, dried over MgSO4, filtered
and evaporated onto silica gel. Purification via column chromatography (SiO2, 19:1 to 3:2
hexane/ethyl acetate) gives the α-arylation product 2.20b (51 mg, 0.22 mmol) in 67%
yield as an off white solid.
67
Preparation of Compounds 2.33a- 2.46
N
OF
Bn
1-Benzyl-4-(4-fluorophenyl)-1,6-dihydro-2H-pyridin-3-one 2.33a
To 100 mL flask charged with tris-(4-fluorophenyl)bismuth dichloride (12.3 g,
21.75 mmol, 110 mol%) and 2.32 (3.7 g, 19.77 mmol, 100 mol%) was added CH2Cl2-t-
BuOH (9:1), (36 mL, 0.5M), followed by tributylphosphine (0.5 mL, 1.99 mmol, 10
mol%) and diisopropylethylamine (3.4 mL, 19.78 mmol, 100 mol%). The reaction
mixture was allowed to stir at room temperature until complete consumption of starting
material was observed by TLC (3 h), at which point the reaction mixture was evaporated
onto silica gel. Purification by column chromatography (SiO2, 9:1 to 3:2 hexane/ethyl
acetate) gives the title compound 2.33a (4.39 g, 15.60 mmol) in 79% yield as an off white
solid. Mp 66.5-68.5 °C. 1H NMR (400 MHz, CDCl3): δ 7.35 (m, 6H), 7.03 (m, 4H), 3.70
(s, 2H), 3.43 (d, J = 3.42 Hz, 2H), 3.33 (s, 2H). 13C NMR (100 MHz, CDCl3): δ 194.1,
162.5 (d, J = 247.5 Hz), 145.2, 137.4, 136.3, 130.8, 130.2 (d, J = 8.5 Hz), 129.1, 128.5,
127.6, 114.9 (d, J = 21.5 Hz), 61.8, 61.7, 52.6. IR (film): 3063, 3029, 2918, 2803, 2750,
1683, 1601, 1509, 1349, 1223, 1160, 823, 699 cm-1. HRMS: Calcd for C18H17NOF [M+1]
282.1294, found 282.1289.
68
N
OF
O
OMe
4-(4-Fluorophenyl)-3-oxo-3,6-dihydro-2H-pyridine-1-carboxylic acid methyl ester
enone 2.33b
Methylchloroformate (2 mL, 24.91 mmol, 200 mol%), was added dropwise to a
solution containing 2.33a (3.5 g, 12.45 mmol, 100 mol%) in CH2Cl2 (20 mL) at room
temperature. The reaction mixture was stirred at this temperature for 18h, at which point
the reaction mixture was evaporated onto silica gel and purified via column
chromatography (SiO2, 4:1 to 1:1 hexane/ethyl acetate) to give the title compound 2.33b
(2.64 g, 10.55 mmol) in 86% yield as a white solid. Mp 110-111 °C. 1H NMR (400 MHz,
CDCl3): δ 7.32 (dd, J = 8.6, 5.5 Hz, 2H), 7.05 (t, J = 8.6 Hz, 3H), 4.45 (d, J = 2.1 Hz,
2H), 4.29 (s, 2H), 3.77 (s, 3H). 13C NMR (100 MHz, CDCl3): δ 191.2, 162.1 (d, J =
247.5 Hz), 155.3, 143.4, 137.2, 130.1 (d, J = 3.1 Hz), 130.2 (d, J = 7.7 Hz), 115.1 (d, J =
21.5 Hz), 53.0, 51.9, 43.6. IR (film): 3053, 2981, 2863, 1723, 1673, 1606, 1463, 1403,
1351, 1236, 1103, 953, 842, 809 cm-1. HRMS: Calcd for C13H13NO3F [M+1] 250.0879,
found 250.0882.
69
N
OF
O
OBn
4-(4-Fluorophenyl)-3-oxo-3,6-dihydro-2H-pyridine-1-carboxylic acid benzyl ester
2.33c
Benzylchloroformate (1.21 g, 7.12 mmol, 200 mol%) and 2.33a (1 g, 3.56 mmol,
100 mol%) were reacted according to the procedure described for 2.33b. The crude
product was purified via column chromatography (SiO2, 4:1 to 1:1 hexane/ethyl acetate)
to give compound 2.33c (1.03 g, 3.16 mmol) in 89% yield as a white solid. Mp 80-81 °C.
1H NMR (400 MHz, CDCl3): δ 7.37 (m, 5H), 7.31 (dd, J = 8.9, 5.5 Hz, 2H), 7.04 (t, J =
8.9 Hz, 2H), 5.19 (s, 2H), 4.47 (d, J = 3.8 Hz, 2H), 4.32 (s, 2H). 13C NMR (100 MHz,
CDCl3): δ 191.1, 162.7 (d, J = 247.5 Hz), 154.7, 143.3, 137.2, 135.8, 130.3 (d, J = 7.7
Hz), 128.5, 128.2 (d, J = 6.9 Hz), 115.1 (d, J = 21.5 Hz), 67.8, 51.9, 43.6. IR (film): 3033,
2956, 2829, 1688, 1601, 1509, 1430, 1350, 1231, 1160, 1100, 814 cm-1. HRMS: Calcd
for C19H17NO3F [M+1] 326.1192, found 326.1195.
N
OF
Bn
1-Benzyl-4-(4-fluorophenyl)piperidin-3-one 2.34a
To a solution containing 2.33a (0.71 g, 2.53 mmol, 100 mol%) in dry THF (15
mL) at -78 °C was added L-Selectride (1M in THF 2.6 mL, 2.53 mmol, 100 mol%)
dropwise. The mixture was stirred at -78 °C for 1h, at which point aqueous NH4Cl (10%
70
solution, 20 mL) was added. The reaction mixture was transferred to a separatory funnel
and was extracted with CH2Cl2 (3 x 15 mL). The combined organics were dried (MgSO4),
filtered and evaporated in vacuo to afford an oily residue. Purification by column
chromatography (SiO2, 9:1 to 3:2 hexane/ethyl acetate) gives compound 2.34a (0.609 g,
2.15 mmol) in 87% yield as pale yellow oil. 1H NMR (300 MHz, CDCl3): δ 7.33 (m, 5H),
7.11 (m, 2H), 7.03 (m, 2H), 3.64 (s, 2H), 3.53 (t, J = 10.0 Hz, 1H), 3.36 (dd, J = 14.1,
1.8 Hz, 1H), 3.06 (dm, J = 9.2 Hz, 1H), 2.93 (d, J = 13.8 Hz, 1H), 2.58 (m, 1H), 2.21 ( m,
2H). 13C NMR (100 MHz, CDCl3): δ 205.2, 162.2 (d, J = 246.2 Hz), 136.9, 133.65, 130.2
(d, J = 8.4 Hz), 129.0, 128.4, 127.4, 115.3 (d, J = 11.5 Hz), 64.4, 62.5, 54.3, 51.9, 32.7.
IR (film): 3062, 3029, 2949, 2801, 1722, 1604, 1511, 1454, 1224, 1098, 833, 740, 700
cm-1. HRMS: Calcd for C18H19NOF [M+1] 284.1450, found 284.1454.
N
OF
O
OMe
4-(4-Fluorophenyl)-3-oxo-piperidine-1-carboxylic acid methyl ester 2.34b
A mixture of silver fluoride (2 mg, 16 μmol, 10 mol%) and (R)-BINAP (5.8 mg, 9
μmol, 6 mol%) was dissolved in methanol (0.2 mL) and stirred at room temperature for
10 min in the dark. At which point CH2Cl2 (2 mL) was added and the solution was stirred
for another 10 min. The solution was cooled to -78 °C and 2.36b (50 mg, 0.15 mmol, 100
mol%) in dichloromethane (2 mL) was added dropwise. The mixture was warmed to -30
71
°C and stirred at this temperature for 72h, at which point the mixture was evaporated to
dryness. Purification via column chromatography (SiO2, 4:1 to 1:1 hexane/ethyl acetate)
gives the title compound 2.34b (35 mg, 0.014 mmol) in 90% yield as colorless oil. Chiral
HPLC (Daicel Chiralpak OJ-H column, 85:15 hexanes:i-PrOH, λ = 254 nm, 0.5 mL/min,
t major = 67.0 min, t minor = 97.7 min ee = 39%). 1H NMR (500 MHz, DMSO-d6 @ 100 °C):
δ 7.19 (dd, J = 8.6, 5.5 Hz, 2H), 7.10 (t, J = 11.1 Hz, 2H), 4.14 (A part of AB pattern, d,
J = 17.4 Hz, 1H), 4.05 (B part of AB pattern, d, J = 17.4 Hz, 1H), 3.85 (m, 2H), 3.63 (s,
3H), 3.56 (m, 2H), 2.21 (m, 2H). 13C NMR (125 MHz DMSO-d6 @ 100 °C): δ 203.9,
160.7 (d, J = 243.1 Hz), 154.7, 133.3 (d, J = 3.5 Hz), 129.2 (d, J = 8.1 Hz), 114.2 (d, J =
1.3 Hz), 53.2, 51.9, 41.7, 29.1. IR (film): 2956, 1700, 1602, 1511, 1449, 14404, 1223,
835 770 cm-1. HRMS: calcd for C13H15NO3F [M+1] 252.1036, found 252.1038.
N
F
Bn
H3CO
1-Benzyl-4-(4-fluorophenyl)-3-methoxymethylene piperidine 2.35
To a vigorously stirred suspension of methoxymethyltriphenylphosphonium
chloride61 (0.5 g, 1.76 mmol, 100 mol%) in dry THF (18 mL) was added a solution of
NaHMDS (2M in THF 3.5 mL, 7.06 mmol, 400 mol%) dropwise. The resulting red
solution was stirred at this temperature for 2h, at which point 2.34a (0.5g, 1.76 mmol,
100 mol%) in THF (3 mL) was added dropwise over 10 min. The reaction mixture was
stirred at room temperature for 20h, at which point aqueous NH4Cl (1M, 30 mL) was
72
added. The resulting mixture was extracted with diethyl ether (3 x 15 mL) and the
combined organics were combined, dried (MgSO4), filtered and evaporated in vacuo to
give a yellow oil. Purification of the residue via column chromatography (SiO2, 9:1 to 4:1
hexane/ethyl acetate) gives the title compound 2.35 (0.35g, 11.29 mmol) in 65% yield as
yellow oil. 1H NMR (300 MHz, CDCl3): δ 7.34 (m, 5H), 7.19 (m, 2H), 6.99 (t, J = 8.9 Hz,
2H), 5.14 (s, 1H), 3.83 (d, J = 12.3 Hz, 1H), 3.70 (A part of AB pattern, J = 13.0 Hz, 1H),
3.50 (B part of AB pattern, J = 13.0 Hz, 1H), 3.42 (s, 3H), 3.16 (d, J = 10.3 Hz, 1H),
2.90 (d, J = 11.6 Hz, 1H), 2.60 (d, J = 12.3 Hz, 1H), 2.21 (td, J = 11.3, 2.7, 1H), 1.98 (m,
1H), 1.78 (m, 1H). 13C NMR (75 MHz, CDCl3): δ 161.4 (d, J = 244.4 Hz), 143.2, 137.9,
137.7, 129.8 (d, J = 7.6 Hz), 129.4, 128.1, 126.9, 117.5, 114.9 (d, J = 21.1 Hz), 63.0,
59.4, 52.8, 51.6, 43.9, 32.7. IR (film): 3029, 2933, 2846, 2798, 1677, 1603, 1509, 1222,
1129, 835, 699 cm-1. HRMS: Calcd for C20H22NOF [M +1] 311.1685, found 311.1675.
N
F
Bn
HO
[1-Benzyl-4-(4-fluorophenyl)piperidin-3-yl]methanol 2.28
A solution of the enol ether 2.35 (50 mg, 0.16 mmol, 100 mol%) in THF (3 mL),
was treated with 0.1M aqueous H2SO4 (2.4 mL, 0.24 mmol, 150 mol%). The solution was
allowed to reflux for a 12h period, at which point the heating bath was removed and the
reaction was allowed to reach room temperature. Saturated aqueous NaHCO3 (10 mL)
was added, and the resulting mixture was extracted with diethyl ether (3 x 5 mL). The
73
combined organics extracts were dried (MgSO4), filtered and evaporated in vacuo to
provide the crude aldehyde (34 mg, 0.11 mmol) in 72 % yield as a yellow oil. 1H NMR
(300 MHz, CDCl3): δ 9.45 (d, J = 1.8 Hz, 1H), 7.34 (m, 5H), 7.28 (m, 2H), 7.02 (t, J =
8.5 Hz, 2H), 3.62 (s, 2H), 3.18 (dm, J = 11.4 Hz, 1H), 2.99 (dm, J = 11.4 Hz, 1H), 2.90
(dm, J = 18.4 Hz, 1H), 2.77 (dd, J = 9.0, 7.0 Hz, 1H), 2.12 (t, J = 11.1 Hz, 2H), 1.89 (m,
2H). 13C NMR (75 MHz, CDCl3): δ 203.0, 161.6 (d, J = 244.7 Hz), 138.6, 137.8, 129.1,
128.8 (d, J = 7.9 Hz), 128.3, 127.2, 115.5 (d, J = 21.4 Hz), 63.1, 54.4, 53.5, 53.0, 43.1,
34.1. IR (film): 2938, 2806, 1721, 1603, 1510, 1465, 1224, 1160, 833, 699 cm-1. HRMS:
Calcd for C19H21NOF [M+1] 298.1607, found 298.1601. The crude aldehyde was
dissolved in ethanol (2 mL) and treated with NaBH4 (6 mg, 0.16 mmol, 100 mol%): The
reaction mixture was stirred at room temperature for 1h. The reaction mixture was treated
with 2N aqueous sodium hydroxide (10 mL) and extracted with CH2Cl2 (3 x 5 mL), and
combined organic extracts were dried (MgSO4), filtered and evaporated in vacuo to give
an oily residue. Purification of the residue via column chromatography (SiO2, 9:1 to 3:2
hexane/ethyl acetate) gives the title compound 2.28 (30 mg, 0.10 mmol) in 63% yield
over two steps as colorless oil. 1H NMR (400 MHz, CDCl3): δ 7.34 (m, 5H), 7.17 (m,
2H), 6.98 (t, J = 8.6 Hz, 2H), 3.60 (A part of AB pattern, J = 13.2 Hz, 1H), 3.56 (B part
of AB pattern, J = 13.2 Hz, 1H), 3.37 (dd, J = 11.3, 3.0 Hz, 1H), 3.21 (m, 2H), 2.98 (d, J
= 11.0 Hz, 1H), 2.33 (m, 1H), 1.98 (m, 3H), 1.79 (m, 3H). IR (film): 3427, 2934, 2848,
2799, 1604, 1510, 1222, 1130, 836, 739, 700cm-1. HRMS: Calcd for C19H23NOF [M+1]
300.1763, found 300.1748.
74
N
TBSOF
Bn
1-Benzyl-5-(tert-butyldimethylsilanyloxy)-4-(4-fluorophenyl)-1,2,3,6-
tetrahydropyridine 2.36a
To a solution containing 2.33a (0.1 g, 0.35 mmol, 100 mol%) in dry THF (2 mL)
at -78 °C was added L-Selectride (1M in THF 0.36 mL, 0.35 mmol, 100 mol%)
dropwise. The mixture was stirred at this temperature for 1h, upon which TBSCl (59 mg,
0.39 mmol, 110 mol%) in THF (1 mL) was added dropwise. The reaction mixture was
allowed to stir at this temperature for an additional 1h and then left to warm to room
temperature. Evaporation of the reaction mixture in vacuo affords an oily residue that was
purified by column chromatography (SiO2, 9:1 hexane/ethyl acetate) to give 2.36a (0.104
g, 2.62 mmol) in 74% yield as a colorless oil. 1H NMR (300 MHz, CDCl3): δ 7.34 (m,
7H), 6.95 (t, J = 8.7 Hz, 2H), 3.63 (s, 2H), 2.99 (s, 2H), 2.63 (t, J = 5.6 Hz, 2H), 2.43 (m,
2H), 0.74 (s, 9H), -0.19 (s, 6H). 13C NMR (75 MHz, CDCl3): δ 161.1 (d, J = 243.5 Hz),
140.8, 130.1 (d, J = 7.6 Hz), 129.3, 128.3, 114.6 (d, J = 21.1 Hz), 62.2, 56.3, 50.1, 29.2,
25.5, 17.9, -4.2. IR (film): 2928, 2856, 1669, 1601, 1509, 1471, 1222, 837, 780 cm-1.
HRMS: calcd for C24H33NOFSi [M+1] 398.2315, found 398.2313.
75
N
TMSO F
O
OMe
4-(4-Fluorophenyl)-5-trimethylsilanyloxy-3,6-dihydro-2H-pyridine-1-carboxylic
acid methyl ester 2.36b
Aryl enone 2.33b (0.2 g, 0.80 mmol, 100 mol%), L-selectride (1M in THF 0.8 mL,
0.80 mmol, 100 mol%) and chlorotrimethylsilane (0.12 mL, 0.88 mmol, 110 mol%) were
reacted according to the procedure described for 2.36a. The crude product was purified
via Kugelrohr distillation to give 2.36b (0.23 g, 0.71 mmol) in 86% yield as colorless oil.
1H NMR (300 MHz, CDCl3): δ 7.32 (dd, J = 8.2 Hz, 2H), 6.98 (t, J = 8.7 Hz, 2H), 3.91 (s,
2H), 3.73 (s, 3H), 3.60 (s, 2H), 2.43 (s, 2H), -0.04 (s, 9H). 13C NMR (75 MHz, CDCl3): δ
203.0, 161.2 (d, J = 245.0 Hz), 155.8, 140.8, 135.2, 129.8 (d, J = 7.6 Hz), 114.5 (d, J =
21.4 Hz), 52.6, 46.8, 41.0, 28.5, 0.3. IR (film): 2957, 1707, 1601, 1510, 1448, 1410, 1253,
1226, 1106, 844, 767 cm-1. HRMS: Calcd for C16H23NO3FSi [M+1] 324.1431, found
324.1437.
N
OHF
Bn
1-Benzyl-4-(4-fluorophenyl)-1,2,3,6-tetrahydropyridin-3-ol 2.37
To a solution of 2.33a (0.1 g, 0.35 mmol, 100 mol%) in CH2Cl2 (3.5 mL) and isopropyl
alcohol (30 μL, 0.35 mmol, 100 mol%) at -20 °C was added dropwise a solution of
76
BH3•SMe2 (2M in THF 0.45 mL, 0.89 mmol, 250 mol%). The mixture was stirred at -20
°C for 1h, at which point a solution containing both (S)-2-Methyl-CBS-oxazaborolidine
(2M in toluene 36 μL, 35 μmol, 10 mol %) and a solution of BH3•SMe2 (2M in THF, 30
μL) was added in one portion. The reaction mixture was allowed to stir at -20 °C for 30
min. The temperature was increased to -15 °C over 45 min, at which point MeOH (10
mL) was added carefully, and the reaction mixture was allowed to stir for an additional
15 min. The reaction mixture was placed in a heating bath at 50 °C and CH2Cl2 and
BH3•SMe2 were removed via distillation. To the remaining solution was added MeOH (5
mL) and the resulting mixture was allowed to stir 65 °C for 1h (to break the N-B
complex). The heating bath was removed and the reaction mixture was allowed to reach
ambient temperature. The solvent was removed in vacuo and the resulting residue was
purified via column chromatography (SiO2, 3:2 to 1:1 hexane/ethyl acetate) to provide
the allylic alcohol 2.37 (36 mg, 0.13 mmol) in 35% yield as a white solid. Mp 76-77 °C.
Chiral HPLC (Daicel Chiralpak OJ-H column, 98:2 hexanes:i-PrOH, λ = 254 nm, 1
mL/min, t major = 43.9 min, t minor = 31.7 min ee = 70%). 1H NMR (400 MHz, CDCl3): δ
7.48 (dd, J = 8.7, 5.5 Hz, 2H), 7.33 (m, 5H), 6.99 (t, J = 8.9 Hz, 2H), 6.09 (t, J = 3.5 Hz,
1H), 6.02 (dd, J = 4.8, 3.4Hz, 1H), 4.37 (s, 1H), 3.65 (s, 2H), 3.35 (dd, J = 17.4, 4.4 Hz,
1H), 3.04 (dd, J = 10.6, 2.0 Hz, 1H), 2.84 (d, J = 17.4, 1H), 2.75 (br s, 1H), 2.49 (dd, J =
11.6, 2.0 Hz, 1H). 13C NMR (100 MHz CDCl3): δ 162.1 (d, J = 246.0 Hz), 137.6, 137.0,
135.2 (d, J = 3.1 Hz), 129.0, 128.3, 127.3, 127.1 (d, J = 7.7 Hz), 124.5, 115.2 (d, J =
21.5 Hz), 66.1, 62.2, 57.7, 53.0. IR (film): 3408, 3061, 3029, 2917, 2804, 1602, 1509,
77
1454, 1230, 1162, 1054, 822, 699. HRMS: Calcd for C18H19NOF [M+1] 284.1450, found
284.1432.
N
OHF
O
OCH3
4-(4-Fluorophenyl)-3-hydroxy-3,6-dihydro-2H-pyridine-1-carboxylic acid methyl
ester 2.38
To a dry 50 mL flask, a solution of (S)-2-Methyl-CBS-oxazaborolidine catalyst
(1M in toluene 0.4 mL, 0.04 mmol, 10 mol %) and a solution of borane dimethyl sulfide-
complex (2M in THF 2 mL, 4.00 mmol, 100 mol%) were added successively at room
temperature. The resulting solution was cooled to -20 °C and 2.33b (1 g, 4.00 mmol, 100
mol%) in CH2Cl2 (18 mL) was added dropwise over 1h, the reaction mixture was
maintained at this temperature for 1h. Methanol (15 mL) was added dropwise to the
reaction mixture and allowed to warm to room temperature. The solution was evaporated
to dryness and purification via column chromatography (SiO2, 9:1 to 1:1 hexane/ethyl
acetate) gives 2.38 (0.96 g, 3.85 mmol) in 95% yield as a white solid. Mp 104-105 °C;
[α]D25 +70° (c =1.6 CH2Cl2), chiral HPLC (Daicel Chiralpak OJ-H column, 70:30
hexanes:i-PrOH, λ = 254 nm, 0.5 mL/min t major = 35.2 min, t minor = 39.2 min ee = 96%)
1H NMR (500 MHz, DMSO-d6 @ 100 °C): δ 7.52 (dd, J = 8.9, 5.5 Hz, 2H), 7.10 (t, J =
12.0 Hz, 2H), 6.08 (t, J = 3.5 Hz, 1H), 4.79 (d, J = 6.6 Hz , 1H), 4.46 (m, 1H), 4.23 (dd,
J = 19.0, 2.7 Hz, 1H), 3.86 (dd, J = 13.3, 3.8 Hz, 1H), 3.84 (dt, J = 17.2, 2.0 Hz, 1H),
78
3.65 (s, 3H), 3.34 (dd, J = 13.3, 3.3 Hz, 1H). 13C NMR (125 MHz DMSO-d6 @ 100 °C):
δ 161.0 (d, J = 244.1 Hz), 155.1, 136.4, 135.2 (d, J = 3.05 Hz), 127.2 (d, J = 8.1 Hz),
122.6, 114.2 (d, J = 20.8 Hz), 63.0, 51.5, 47.9, 42.9. IR (film): 3412, 2957, 2921, 2851,
1693, 1601, 1511, 1470, 1448, 1411, 1231, 1130, 1062, 818, 767 cm-1. HRMS: calcd for
C18H17NOF [M+1] 250.0879, found 250.0880.
N
OF
O
OCH3
(PhO)2PO
N
OF
H3CO
O
(PhO)2PO
3-(Diphenoxyphosphoryloxy)-4-(4-fluorophenyl)-3,6-dihydro-2H-pyridine-1-
carboxylic acid methyl ester 2.39
(Mixture of rotomers)
Chlorodiphenylphosphate (0.9 ml, 4.22 mmol, 150 mol%) was added dropwise to
a solution containing 2.38 (0.71 g, 2.81 mmol, 100 mol%), pyridine (0.45 mL, 5.62 mmol,
200 mol%) and DMAP (0.51 g, 4.22 mmol, 150 mol%) at room temperature. After
stirring the reaction mixture for 2h at this temperature, it was poured into a separatory
funnel, washed with 2M aqueous CuSO4 solution (3 x 20 mL), dried over MgSO4,
filtered and evaporated to afford an oily residue. Purification via column chromatography
(SiO2, 9:1 to 4:1 dichloromethane/ethyl acetate) gives 2.39 (1.21 g, 2.42 mmol) in 89%
yield as a white solid. Mp 99-100 °C. [α]D23
+36° (c = 3.33, CH2Cl2), 1H NMR (300 MHz,
CDCl3): δ 7.34 (m, 4H), 7.18 (m, 6H), 6.94 (t, J = 8.4 Hz, 2H), 6.88 (d, J = 7.94 Hz, 2H),
79
6.22 (s, 1H), 5.62 (s, 1H), 4.55 (dd, J = 14.6, 2.8 Hz, 2H), 3.91 (d, J = 18.2 Hz, 1H), 3.76
(s, 1H), 3.61 (s, 2H), 3.50 (d, J = 14.6 Hz, 1H). 13C NMR (75 MHz, CDCl3): δ 162.5 (d,
J = 247.3 Hz), 155.9, 150.4, 150.0, 133.4, 129.0 (d, J = 16.0 Hz), 127.8, 127.7, 125.2,
125.1, 119.8, 119.7, 115.4 (d, J = 21.4 Hz), 71.7, 52.7, 46.4, 43.5. IR (film): 3063, 3033,
2962, 2840, 1706, 1590, 1512, 1488, 1446, 1410, 1283, 1232, 1190, 1130, 1009, 956, 825,
767 cm-1. HRMS: Calcd for C25H24NO7FP [M+1] 500.1274, found 500.1278.
N
F
O OCH3
SiMe2(OPr-i)
N
F
H3CO O
SiMe2(OPr-i)
4-(4-Fluorophenyl)-3-[(isopropoxydimethylsilanyl)methyl]-3,6-dihydro-2H-
pyridine-1-carboxylic acid methyl ester 2.40
To a slurry of CuCN (0.43 g, 4.81 mmol, 200 mol%) in THF (10 mL) was added
a solution of (iPrO)Me2CH2MgCl (1M in THF 4.80 mL, 4.81 mmol, 200 mol%) at -18 °C
(ice/NaCl). After stirring at this temperature for 40 min, the reaction mixture was further
cooled to -50 °C and 2.39 (1.20 g, 2.40 mmol, 100 mol%) in THF (10 mL) was added
dropwise. The reaction was allowed to warm to 0 °C over 40 min and quenched with
10% aqueous NH4Cl (30 mL). The aqueous layer was extracted with CH2Cl2 (3 x 10mL),
and the combined organic extracts were dried over MgSO4, filtered and evaporated to
afford an oily residue. Purification of the residue via column chromatography (SiO2, 3:2
hexane/ethyl acetate) gives 2.40 (0.84 g, 2.31 mmol) in 96% yield as a colorless oil. [α]D
80
23 +72 (c = 3.6, CH2Cl2). 1H NMR (300 MHz, CDCl3): δ 7.29 (m, 2H), 6.99 (t, J = 8.7 Hz,
2H), 5.76 (s, 1H), 4.28 (m, 1H), 3.95 (m, 2H), 3.87 (d, J = 18.8 Hz, 1H), 3.71 (s, 3H),
3.28 (dd, J = 13.2, 3.3 Hz, 1H), 2.87 (s, 1H), 1.12 (2d, J = 6.2 Hz, 6H), 0.68 (2d, J =
10.8 Hz, 1H), 0.55 (2s, 1H), 0.09 (s, 6H). 13C NMR (75 MHz, CDCl3): δ 162.1 (d, J =
246.0 Hz), 156.6, 141.6, 135.9, 127.6 (d, J = 7.3 Hz), 119.5, 115.1 (d, J = 21.1 Hz), 64.9,
52.4, 46.3, 43.8, 32.3, 25.8, 19.5, -0.78. IR (film): 3081, 2956, 2889, 1706, 1601, 1510,
1448, 1412, 1375, 1335, 1250, 1231, 1191, 1118, 1025, 958, 880, 836, 813 cm-1. HRMS:
Calcd for C19H27NO3FSi [M-1] 364.1744, found 364.1745.
N
F
O OCH3
OH
4-(4-Fluorophenyl)-3-hydroxymethyl-3,6-dihydro-2H-pyridine-1-carboxylic acid
methyl ester 2.41
To a solution of 2.40 (0.82 g, 2.24 mmol, 100 mol%) in DMF (12 mL) was added
potassium fluoride (0.52 g, 8.98 mmol, 400 mol%) and 30% aqueous hydrogen peroxide
(3 mL, 26.94 mmol, 1200 mol%) at room. Then after stirring for 18h, it was diluted with
water (60 mL). The aqueous layer was extracted with ether (3 x 20 mL) and combined
ethereal extracts were washed with saturated aqueous sodium thiosulfate (20 mL), dried
over MgSO4 and evaporated to afford colorless oil. Purification via column
chromatography (SiO2, 4:1 to 1:1 hexane/ethyl acetate) gives 2.41 (0.41 g, 1.55 mmol) in
81
70% yield as a colorless oil. [α]D23
+84° (c = 3.06, CH2Cl2), chiral HPLC (Daicel
Chiralpak OJ-H column, 90:10 hexanes:i-PrOH, λ = 254 nm, 0.4 mL/min, t major = 31.0
min, t minor = 45.9 min ee = 92%), 1H NMR (500 MHz, DMSO-d6 @ 100 °C): δ 7.43 (dd,
J = 8.8, 2.1 Hz, 2H), 7.12 (t, J = 8.9 Hz, 2H), 6.00 (t, J = 2.4 Hz, 1H), 4.27 (s, 1H), 4.18
(m, 2H), 3.82 (dt, J = 19.1, 2.8 Hz, 1H), 3.65 (s, 3H), 3.32 (dt, J = 10.6, 3.8, 1H), 3.18
(m, 2H), 2.83 (dd, J = 4.2, 2.1 Hz, 1H). 13C NMR (125 MHz DMSO-d6 @ 100 °C): δ
161.0 (d, J = 2.44.1 Hz), 155.3, 135.7 (d, J = 3.0 Hz), 135.0, 126.9 (d, J = 8.1 Hz), 121.9,
114.4 (d, J = 21.4 Hz), 60.3, 51.5, 43.1, 41.5. IR (film): 3426, 3056, 2954, 2876, 1686,
1601, 1510, 1448, 1412, 1375, 1228, 1131, 1091, 1039, 953, 836, 814, 768, 735 cm-1.
HRMS: Calcd for C14H17NO3F [M+1] 266.1192, found 266.1199.
N
F
O OCH3
OH
4-(4-Fluorophenyl)-3-hydroxymethylpiperidine-1-carboxylic acid methyl ester 2.42
A solution containing 2.41 (0.3 g, 1.13 mmol, 100 mol%) in CH2Cl2 (11 mL) was
cooled to -78 °C, evacuated and filled with argon. This process was repeated two more
times. The solution was allowed to warm to room temperature and Crabtree’s catalyst (45
mg, 0.06 mmol, 5 mol%) was added as a solid in one portion. The mixture was purged
with hydrogen for 5 minutes and allowed to stir under hydrogen atmosphere for 20h. The
reaction mixture was evaporated onto silica gel and purification via column
82
chromatography (SiO2, 4:1 to 3:2 hexane/ethyl acetate) gives the saturated alcohol 2.42
(0.21 g, 0.79 mmol ) in 69% yield. [α]D 23 -40° (c = 2.0, CH2Cl2). 1H NMR (500 MHz,
DMSO-d6 @ 100 °C): δ 7.23 (dd, J = 7.9, 6.1 Hz, 2H), 7.06 (t, J = 8.9 Hz, 2H), 4.30 (dd,
J = 13.3, 2.5 Hz, 1H), 4.09 (d, J = 5.6 Hz, 1H), 4.07 (d, J = 15.7 Hz, 1H), 3.64 (s, 3H),
3.18 (m, 1H), 3.02 (m, 1H), 2.83 (t, J = 13.0 Hz, 1H), 2.66 (t, J = 11.4 Hz, 1H), 2.53 (td,
J = 11.6, 3.2 Hz, 1H), 1.72 (m, 2H), 1.57 (qd, J = 12.6, 4.4 Hz, 1H). 13C NMR (125
MHz DMSO-d6 @ 100 °C): δ 160.3 (d, J = 244.1 Hz), 154.7, 139.8 (d, J = 3.0 Hz), 128.5
(d, J = 7.6 Hz), 114.3 (d, J = 21.4 Hz), 60.8, 51.5, 46.7, 43.6, 43.0, 42.8, 33.2. IR (film):
3435, 3009, 2918, 2853, 1697, 1603, 1510, 1476, 1451, 1413, 1279, 1223, 1159, 1129,
1064, 1014, 832, 767 cm-1. HRMS: Calcd for C14H19NO3F [M+1] 268.1349, found
268.1350.
N
F
O OCH3
O O
O
3-(Benzo[1,3]dioxol-5-yloxymethyl)-4-(4-fluorophenyl)piperidine-1-carboxylic acid
methyl ester 2.43
The saturated alcohol 2.42 (0.100 g, 0.37 mmol, 100 mol%) was dissolved in THF
(3 mL) and PPh3 (0.120 g, 0.45 mmol, 120 mol%) was added. This solution was cooled
to 0 °C and DIAD (90 μL, 0.45 mmol, 120 mol%) was added dropwise. After stirring this
solution at 0 °C for 10 min, sesamol (0.100 g, 0.748 mmol, 200 mol%) in THF (1mL)
83
was added dropwise, and stirring was continued at 0 °C for another 10 min then warmed
to 50 °C for 2h. The reaction mixture was evaporated to dryness, and the resulting residue
was dissolved in CH2Cl2 (5 mL) and washed with 2M aqueous NaOH (2 x 10mL). The
aqueous fractions were combined and back extracted with CH2Cl2 (10 mL). The
combined organic fractions were evaporated onto silica gel and purification via column
chromatography (SiO2, 4:1 hexane/ethyl acetate) gives the phenolic ether 2.43 (0.11 g,
2.84 mmol) in 76% yield as pale yellow oil. [α]D 23 -13° (c = 1.5, CH2Cl2). 1H NMR (500
MHz, DMSO-d6 @ 100 °C): δ 7.27 (dd, J = 8.6, 5.6 Hz, 2H), 7.06 (t, J = 8.9 Hz, 2H), 6.9
(d, J = 8.5 Hz, 1H), 6.40 (d, J = 2.4 Hz, 1H), 6.18 (dd, J = 8.3, 2.4 Hz, 1H), 5.89 (s, 2H),
4.31 (dd, J = 13.4, 3.0 Hz, 1H), 4.09 (dt, J = 13.3, 2.0 Hz, 1H), 3.64 (s, 3H), 3.41 (m,
2H), 2.89 (td, J = 12.8, 2.8 Hz, 1H), 2.82 (t, J = 11.6 Hz, 1H), 2.70 (td, J = 5.8 Hz, 1H),
2.05 (m, 1H), 1.73 (dd, J = 13.2, 3.1 Hz, 1H), 1.67 (qd, J = 12.1, 4.4 Hz, 1H). 13C NMR
(125 MHz DMSO-d6 @ 100 °C): 160.5 (d, J = 242.6 Hz), 154.7, 153.6, 147.4, 141.0,
139.7 (d, J = 3.0 Hz), 128.6 (d, J = 8.1 Hz), 114.5 (d, J = 21.4 Hz), 107.3, 105.9, 100.4,
97.6, 69.0, 51.6, 46.4, 43.5, 42.9, 40.6, 32.9. IR (film): 3008, 2916, 1701, 1510, 1488,
1450, 1412, 1276, 1223, 1185, 1132, 1037, 937, 832, 765 cm-1. HRMS: Calcd for
C21H23NO5F [M+1] 388.1560, found 388.1561.
84
HN
OO
O
F
·HCl
(-)-Paroxetine hydrochloride
To phenolic ether 2.43 (50 mg, 0.13 mmol, 100 mol%) was added KOH (94 mg,
1.68 mmol%, 1300 mol%), ethylene glycol (1.5 mL) and water (0.6 mL). The mixture
was heated to 100 °C for 20h and then cooled to room temperature, diluted with water
(10 mL) and extracted with CH2Cl2 (3 X 5 mL), the combined organic layers were
washed with water (2 X 5 mL), dried over MgSO4, filtered, and evaporated in vacuo to
give an oily residue. The residue was dissolved in ether (5 mL) and the resulting solution
was treated with 4M HCl in dioxane (5mL), to give a white solid. The white solid was
filtered, washed with ether and dried to afford paroxetine hydrochloride (45 mg, 0.123
mmol) 92% yield. Mp 132-134 °C, Lit28i 136-138 °C [α]D 23 – 85 ° (c = 1.0, CH3OH),
Lit28i -86.5 ° 1H NMR (400 MHz, CDCl3): δ 7.20 (dd, J = 8.2, 5.5 Hz, 2H), 7.00 (t, J =
8.5 Hz, 2H), 6.61 (d, J = 8.2 Hz, 1H), 6.32 (d, J = 2.73 Hz, 1H), 6.10 (dd, J = 8.5, 2.4 Hz,
1H), 5.88 (s, 2H), 3.73 (dd, J = 21.5, 14.4 Hz, 2H), 3.60 (d, J = 8.2 Hz, 1H), 3.48 (dd, J =
9.9, 4.4 Hz, 1H), 3.17 (t, J = 10.9 Hz, 1H), 2.04 (m, 1H), 2.90 (t, J = 11.3 Hz, 1H), 2.64
(m, 1H), 2.38 (q, J = 13.3 Hz, 2H), 2.03 (d, J = 6.3 Hz, 1H). IR (film): 3401, 2925, 1605,
1510, 1224, 1185, 1037, 831 cm-1.
85
N
OHF
O
OBn
4-(4-Fluorophenyl)-3-hydroxy-3,6-dihydro-2H-pyridine-1-carboxylic acid benzyl
ester 2.44
To a solution containing CeCl3•7H2O (1.09 g, 2.71 mmol, 100 mol%) and 2.33c
(0.88 g, 2.71 mmol, 100 mol%) in methanol (20 mL) was added NaBH4 (0.102 g, 2.71
mmol, 100 mol%) in small portions over 2 minutes at room temperature. The mixture
was allowed to stir for 5 minutes, after which water (30 mL) was added the reaction
mixture was extracted with dichloromethane (3 X 20 mL), the organic extracts were then
combined, dried over MgSO4, filtered and concentrated in vacuo to afford an oily residue.
Purification via column chromatography (SiO2, 3:1 hexane/ethyl acetate) gives 2.44 (0.68
g, 2.08 mmol) in 76% yield as a white solid. Mp 106-108 °C, 1H NMR (500 MHz,
DMSO-d6 @ 100 °C): δ 7.53 (dd, J = 8.8, 5.5 Hz, 2H), 7.36 (m, 5H), 7.11 (t, J = 8.9 Hz,
2H), 6.09 (t, J = 3.5 Hz, 1H), 5.15 (s, 2H), 4.86 (t, J = 5.4 Hz , 1H), 4.49 (m, 1H), 4.29
(dd, J = 19.1, 3.7 Hz, 1H), 3.92 (dd, J = 13.2, 3.7 Hz, 1H), 3.89 (d, J = 16.5 Hz, 1H),
3.39 (dd, J = 13.2, 3.1 Hz, 1H). 13C NMR (125 MHz DMSO-d6 @ 100 °C): δ 161.0 (d, J
= 244.1 Hz), 154.5, 136.6, 136.4, 135.2 (d, J = 3.05 Hz), 127.8, 127.2 (d, J = 7.6 Hz),
127.1, 126.9, 122.6, 114.2 (d, J = 21.4 Hz), 71.6, 63.0, 47.9, 43.0. IR (filml): 3414, 3033,
2915, 1691, 1510, 1432, 1360, 1229, 1125, 1070, 819, 698 cm-1. HRMS: Calculated for
C19H19NO3F [M+1] 328.1349, found 328.1349.
86
N
OF
O
OBn
(PhO)2PO
N
OF
BnO
O
(PhO)2PO
3-(Diphenoxyphosphoryloxy)-4-(4-fluorophenyl)-3,6-dihydro-2H-pyridine-1-
carboxylic acid benzyl ester 2.45
Chlorodiphenylphosphate (0.5 ml, 2.31 mmol, 150 mol%), 2.44 (0.5 g, 1.54
mmol, 100 mol%), pyridine (0.25 mL, 3.08 mmol, 200 mol%) and DMAP (0.28 g, 2.31
mmol, 150 mol%) were reacted according to the procedure described for 2.39. The crude
product was purified via column chromatography (SiO2, 9:1 to 4:1 dichloromethane/ethyl
acetate) to give 2.45 (0.74 g, 1.32 mmol) in 86% yield as a white solid. Mp 59-61 °C. 1H
NMR (300 MHz, CDCl3): δ 7.24 (m, 17H), 6.91 (t, J = 8.4 Hz, 2H), 6.88 (d, J = 7.94 Hz,
2H), 6.20 (s, 1H), 5.62 (s, 1H), 5.2 (s, 1H), 4.60 (dd, J = 14.4, 3.0 Hz, 2H), 3.92 (d, J =
19.5 Hz, 1H), 3.76 (s, 1H), 3.52 (dd, J = 14.1, 2.4 Hz, 1H). 13C NMR (75 MHz, CDCl3):
δ 162.5 (d, J = 247.3 Hz), 155.3, 150.4, 150.0, 136.3, 133.4, 129.0 (d, J = 16.0 Hz),
128.4, 127.8, 127.7, 125.2, 125.0, 119.8, 115.4 (d, J = 21.4 Hz), 71.7, 67.4, 46.4, 43.6. IR
(film): 3065, 2951, 1706, 1590, 1511, 1489, 1429, 1283, 1230, 1190, 1010, 957, 825, 766,
689 cm-1. HRMS: Calcd for C31H28NO6FP [M+1] 560.163, found 560.1638.
87
CbzN
OO
O
F
3-(Benzo[1,3]dioxol-5-yloxymethyl)-4-(4-fluorophenyl)-3,6-dihydro-2H-pyridine-1-
carboxylic acid benzyl ester 2.46.
To a stirred solution of Ar-OCH2SnBu3 (240 mg, 0.54 mmol, 300 mol%) in THF
(3 mL) at -78 °C was added n-BuLi (2.5 M in hexanes, 0.18 mL, 0.45 mmol, 250 mol%)
dropwise. The reaction mixture was stirred at -78 °C for 1h at which point CuBr•SMe2
(110 mg, 0.54 mmol, 300 mol%) in Me2S (0.5 mL) was added dropwise. The reaction
mixture was stirred an additional 30 minutes at -78 °C, at which 2.45 (100 mg, 0.18
mmol, 100 mol%) in THF (1 mL) was added. The reaction mixture continued to stir at -
78 °C for an additional 1h period, at which point the reaction mixture was allowed to
warm to -10 °C and 10% NH4Cl aq (10 mL) was added. The aqueous layer was extracted
with dichloromethane (3 x 5 mL), and the combined organic extracts were dried over
MgSO4, filtered and evaporated to afford an oily residue. Purification of the residue via
column chromatography (SiO2, 3:2 hexane:ethyl acetate) gives the title compound 2.46
(22 mg, 0.05 mmol) in 27% yield. 1H NMR (500 MHz, DMSO-d6 @ 100 °C): δ 7.45 (dd,
J = 8.8, 5.5 Hz, 2H), 7.29 (s, 5H), 7.13 (t, J = 8.8 Hz, 2H), 6.68 (d, J = 8.4 Hz, 1H), 6.41
(d, J = 2.4 Hz, 1H), 6.22 (dd, J = 8.5, 2.3 Hz, 1H), 6.10 (t, J = 3.4 Hz, 1H), 5.89 (s, 2H),
5.08 (AB pattern J = 12.6 Hz, 2H), 4.33 (d, J = 13.3 Hz, 2H), 3.90 (d, J = 19.2, Hz, 1H),
3.72 (d, J = 5.1 Hz, 2H), 3.29 (d, J = 3.4 Hz, 2H), 3.20 (s, 1H). 13C NMR (125 MHz
DMSO-d6 @ 100 °C): 161.2 (d, J = 244.6 Hz), 154.5, 153.5, 147.4, 141.0, 136.5, 135.4,
88
134.1, 127.7, 127.1, 127.1 (d, J = 8.1 Hz), 126.8, 123.2, 114.6 (d, J = 21.4 Hz), 107.3,
106.0, 100.4, 97.7, 68.1, 65.8, 43.1, 41.8, 36.9. IR (NaCl): 3033, 2962, 2877, 1701, 1602,
1508, 1465, 1431, 1260, 1224, 1184, 1129, 1037, 814 cm-1. HRMS: Calcd for
C27H25NO5F [M+1] 462.1717, found 462.1711.
89
OF
2.7 Spectroscopic Characterization Data
2-(4-Fluorophenyl)cyclohex-2-enone 2.17c. 1H NMR (400 MHz, CDCl3) δ 7.28
(m, 2H), 7.02 (m, 3H), 2.58 (t, J = 6.5 Hz, 2H), 2.53 (q, J = 5.5 Hz, 2H), 2.10 (quint, J =
6.5 Hz, 2H). 13C NMR (75 MHz, CDCl3) δ 197.9, 162.3 (d, J = 246.0 Hz), 147.9, 139.3,
132.4, 130.2 (d, 7.7 Hz), 114.8 (d, J = 21.5 Hz), 38.9, 26.5, 22.8. FTIR (NaCl): 3038,
2929, 1672, 1503, 1350, 1214, 1159 cm-1. HRMS: calcd for C12H12OF [M+1] 191.0872
found 191.0872.
1H NMR of 2.17c
90
OCl
13C NMR of 2.17c
2-(4-Chlorophenyl)cyclohex-2-enone 2.17d. 1H NMR (300 MHz, CDCl3): δ
7.31(A part of AB pattern, J = 8.7 Hz, 2H), 7.24 (B part of AB pattern, J = 8.7 Hz, 2H),
7.03 (t, J = 8.7 Hz, 1H), 2.56 (m, 4H), 2.10 (q, J = 6.2 Hz, 2H). 13C NMR (75.5 MHz,
CDCl3): δ 197.6, 148.2, 139.3, 134.9, 133.5, 129.9, 128.1, 38.9, 26.5, 22.8. FTIR (NaCl):
2940, 2858, 1673, 1482, 1345, 1099, 826, cm-1. HRMS: calcd for C12H12OCl [M+1]
207.0576 found 207.0582.
92
OBr
2-(4-Chlorophenyl)cyclohex-2-enone 2.17e. 1H NMR (400 MHz, CDCl3) δ 7.46
(A part of AB pattern, J = 8.5 Hz, 2H), 7.18 (B part of AB pattern J = 8.5 Hz, 2H), 7.03
(t, J = 4.4 Hz, 1H) , 2.58 (t, J = 6.5 Hz, 2H), 2.53 (q, J = 5.8 Hz, 2H), 2.10 (quint, J =
6.2 Hz, 2H). 13C NMR (100 MHz, CDCl3): δ 197.6, 148.3, 139.3, 135.3, 131.1, 130.3,
121.7, 38.9, 26.5, 22.9. FTIR (NaCl): 2945, 2869, 1667, 1481, 913, 732, 645 cm-1.
HRMS: calcd for C12H12OBr [M+1] 251.0071 found 251.0078.
1H NMR of 2.17e
93
O
F
13C NMR of 2.17e
2-(3-Fluorophenyl)cyclohex-2-enone 2.17f. 1H NMR (400 MHz, CDCl3): δ 7.30
(m, 1H), 7.06 (m, 3H), 6.98 (td, J = 10.3, 1.0 Hz, 1H), 2.56 (m, 4H), 2.10 (quint, J = 6.16
Hz, 2H). 13C NMR (100 MHz, CDCl3): δ 197.5, 162.4 (d, J = 245.23 Hz), 148.7, 139.2,
138.5 (d, J = 7.69 Hz), 129.4 (d, 8.45 Hz), 124.2, 115.5 (d, J = 21.50 Hz), 114.2 (d, J =
21.53 Hz), 38.9, 26.5, 22.7. FTIR (NaCl): 3055, 2940, 2863, 1667, 1585, 1471, 1422,
1214, 1164, 771 cm-1. HRMS: calcd for C12H12OF [M+1] 191.0872 found 191.0869.
95
O
OMe
2-(3-Methoxyphenyl)cyclohex-2-enone 2.17g. 1H NMR (300 MHz, CDCl3):
7.24 (t, J = 8.2 Hz, 1H), 7.02 (t, J = 8.5 Hz, 1H), 6.86 (m, 3H), 3.79 (s, 3H), 2.57 (t, J =
6.5 Hz, 2H), 2.52 (q, J = 5.8 Hz, 2H), 2.09 (quint, J = 6.2 Hz, 2H). 13C NMR (75.5 MHz,
CDCl3): δ 197.8, 159.1, 148.1, 140.1, 137.8, 128.9, 121.0, 114.1, 113.1, 55.1, 39.0, 26.5,
22.8. FTIR (NaCl): 3011, 2836, 1667, 1579, 1481, 1356, 1290, 1050, 782, 689 cm-1.
HRMS: calcd for C13H15O2 [M+1] 203.1072 found 203.1070.
1H NMR of 2.17g
96
O
C H3
F
13C NMR of 2.17g
2-(4-Fluoro-3-methylphenyl)cyclohex-2-enone 2.17i. 1H NMR (400 MHz,
CDCl3): δ 7.12 (d, J = 7.5 Hz, 1H), 7.08 (m, 1H), 6.96 (m, 2H), 2.57 (t, J = 6.5 Hz, 2H),
2.52 (q, J = 6.2 Hz, 2H), 2.26 (s, 3H), 2.09 (quint, J = 6.2 Hz, 2H). 13C NMR (100 MHz,
CDCl3): δ 197.9, 160.9 (d, J = 245.23 Hz), 147.7, 139.5, 132.2, 131.7 (d, J = 4.61 Hz),
127.5 (d, J = 8.46 Hz), 124.2 (d, J = 17.68 Hz), 114.5 (d, J = 22.29 Hz), 38.9, 26.5, 22.8,
14.5. FTIR (NaCl): 3049, 2929, 2864, 1673, 1498, 1345, 1236, 1121, 809 cm-1. HRMS:
calcd for C13H14OF [M+1] 205.1028 found 205.1021.
98
O Br
2-(4-Bromophenyl)cyclopent-2-enone 2.18e. 1H NMR (400 MHz, CDCl3) δ 7.75 (t, J =
6.2 Hz, 1H), 7.51 (A part of AB pattern, J = 8.9 Hz, 2H), 7.42 (B part of AB pattern J =
8.9 Hz, 2H), 2.60 (m, 2H), 2.51 (m, 2H). 13C NMR (100 MHz, CDCl3): δ 207.2, 159.2,
142.2, 131.5, 130.4, 128.5, 122.4, 35.6, 26.2. FTIR (NaCl): 3054, 2918, 1699, 1486, 907,
732 cm-1. HRMS: calcd for C11H10OBr [M+1] 136.9915 found 236.9914. MP 77-78 °C
1H NMR of 2.18e
99
O
F
13C NMR of 2.18e
2-(3-Fluorophenyl)cyclopent-2-enone 2.18f. 1H NMR (400 MHz, CDCl3): δ
7.86 (t, J = 3.1 Hz, 1H), 7.46 (m, 2H), 7.33 (t, J = 7.9 Hz, 1H), 7.02 (t, J = 8.2 Hz, 1H),
2.72 (m, 2H), 2.61 (m, 2H). 13C NMR (100 MHz, CDCl3): δ 207.1, 162.7, (d, J = 245.2
Hz), 159.8, 142.2, 133.6 (d, J = 8.45 Hz), 129.9 (d, J = 8.46 Hz), 122.6, 115.1 (d, J =
21.5 Hz) 114.0 (d, J = 22.3 Hz), 35.7, 26.2. FTIR (NaCl): 3046, 2918, 1700, 1585, 1487,
1334, 1192 771 cm-1. HRMS: calcd for C11H10OF [M+1] 177.0715 found 177.0721.
1H NMR of 2.18f
100
O
OMe
13C NMR of 2.18f
2-(3-Methoxyphenyl)cyclopent-2-enone 2.18g. 1H NMR (400 MHz, CDCl3): δ
7.82 (t, J = 2.9 Hz, 1H), 7.22 (m, 3H), 6.87 (m, 1H), 3.83 (s, 3H), 2.70 (m, 2H), 2.59 (m,
2H). 13C NMR (100 MHz, CDCl3): δ.207.4, 159.5, 143.1, 132.9, 129.3, 119.4, 114.0,
112.4, 55.2, 35.8, 26.1. FTIR (NaCl): 3065, 2929, 2830, 1694, 1579, 1481, 1333, 1235,
1044, 781 cm-1. HRMS: calcd for C12H13O2 [M+1] 189.0915 found 189.0913.
1H NMR of 2.1g
101
O
CF3
13C NMR of 2.18g
2-(3-Trifluoromethylphenyl)cyclopent-2-enone 2.18h. 1H NMR (400 MHz,
CDCl3): δ 7.92 (m, 2H), 7.52 (m, 3H), 2.74 (m, 2H), 2.62 (m, 2H). 13C NMR (100 MHz,
CDCl3): δ 206.9, 160.1, 142.2, 132.6, 131.2, 130.9, 130.5, 128.9, 125.0 (q, J = 3.8 Hz),
123.8 (q, J = 3.8 Hz), 35.6, 26.3. FTIR (NaCl): 3071, 2923, 2852, 1694, 1437, 1322,
1109, 1077 cm-1 . HRMS: calcd for C12H10OF3 [M+1] 227.0683 found 227.0683.
1H NMR of 2.18h
102
O F
CH3
13C NMR of 2.18h
2-(4-Fluoro-3-methylphenyl)cyclopent-2-enone 2.18i. 1H NMR (400 MHz,
CDCl3) δ 7.76 (m, 1H), 7.53 (d, J = 1.7 Hz, 1H), 7.48 (m, 1H) 7.00 (t, J = 9.2 Hz, 1H),
2.69 (m, 2H), 2.59 (m, 2H), 2.29 (s, 3H). 13C NMR (100 MHz, CDCl3) δ 207.6, 161.3, (d,
J = 246.7 Hz), 158.4, 142.5, 130.2, 127.4, 126.3, 124.7 (d, J = 17.68 Hz), 115.0 (d, J =
22.3 Hz), 35.7, 26.0, 14.6. FTIR (NaCl): 3076, 2912, 1683, 1503, 1312, 1229, 1109, 831,
781 cm-1. HRMS: calcd for C12H12OF [M+1] 191.0872 found 191.0875. M.P 66-68 °C.
1H NMR of 2.18i
103
H
O
CH3
F
13C NMR of 2.18i
2-(4-Fluorophenyl)but-2-enal 2.19c. 1H NMR (400 MHz, CDCl3) δ 9.59 (s, 1H),
7.11 (m, 4H), 6.86 (q, J = 6.8 Hz, 1H), 2.01 (d, J = 7.2 Hz, 3H). 13C NMR (100 MHz,
CDCl3) δ 193.4, 162.4 (d, J = 247.5 Hz), 151.6, 144.1, 131.3 (d, J = 8.4 Hz), 128.0,
115.4 (d, J = 21.5 Hz), 15.9. FTIR (NaCl): 3059, 2830, 2704, 1694, 1508, 1224, 841, 732
cm-1. HRMS: calcd for C10H10OF [M+1] 165.0715 found 165.0716.
1H NMR of 2.19c
104
H
O
CH3
F
13C NMR of 2.19c 2-(4-Fluorophenyl)but-2-enal 2.19d. 1H NMR (400 MHz, CDCl3) δ 9.59 (s, 1H), 7.37
(q, J = 7.9 Hz, 1H), 7.05 (t, J = 8.5 Hz, 1H), 6.95 (d, J = 7.9 Hz, 1H), 6.87 (t, J = 7.5 Hz,
1H), 2.01 (d, J = 7.2 Hz, 3H). 13C NMR (100 MHz, CDCl3): 192.9, 162.5, (d, J = 246.8
Hz), 151.9, 143.9, 134.3 (d, J = 8.5 Hz), 129.9 (d, J = 8.5 Hz), 125.2, 116.5 (d, J = 21.5
Hz), 114.8 (d, J = 20.7 Hz), 15.9. FTIR (NaCl): 2825, 2716, 1694, 1574, 1432, 1246, 908,
738 cm-1. HRMS: calcd for C10H10OF [M+1] 165.0715 found 165.0721.
106
NO2
F
1-Fluoro-4-(1-nitro-2-phenylvinyl)benzene 2.20c. 1H NMR (400 MHz, CDCl3):
δ 8.25 (s, 1H), 7.33 (m, 3H), 7.27 (t, J = 6.0 Hz, 2H), 7.20 (t, J = 8.6 Hz, 2H), 7.10 (d, J
= 7.2 Hz, 2H). 13C NMR (100 MHz, CDCl3): δ 163.8 (d, J = 251.3 Hz), 148.8, 135.5,
133.0 (d, J = 8.2 Hz), 131.3, 131.2, 131.1, 129.0, 126.7, 116.9 (d, J = 21.7 Hz). FTIR
(NaCl): 3054, 1651, 1601, 1510, 1448, 1327, 1226, 1158, 971, 843, 765, 690 cm-1.
HRMS: calcd for C14H11NO2F [M+1] 244.0774 found 244.0772. MP 88–90 °C yellow
solid.
1H NMR of 2.20c
107
13C NMR of 2.20c
NO2MeO
1-Methoxy-3-(1-nitro-2-phenylvinyl)benzene 2.20d. 1H NMR (400 MHz
CDCl3): δ 8.21 (s, 1H), 7.40 (t, J = 8.0 Hz, 1H), 7.25 (d, J = 7.4 Hz, 1H), 7.23 (t, J = 7.8
Hz, 2H), 7.10 (d, J = 7.4 Hz, 2H), 7.05 (ddd, J = 1.0, 2.5, 5.9 Hz, 1H), 6.91 (d, J = 7.6
Hz, 1H), 7.86 (s, 1H), 3.80 (s, 3H). 13C NMR (100 MHz, CDCl3): δ 160.3, 149.6, 135.0,
131.9, 131.4, 131.3, 131.1, 130.6, 129.0, 123.0, 116.2, 116.0, 55.6. FTIR (NaCl): 3055,
2911, 1646, 1514, 1448, 1316, 1244, 1113, 897, 753, 681 cm-1. HRMS: calcd for
C15H14NO3 [M+1] 256.0974 found 256.0977.
109
NO2
F
H3C
1-Fluoro-2-methyl-4-(1-nitro-2-phenylvinyl)benzene 2.20e. 1H NMR (400
MHz CDCl3): δ 8.21 (s, 1H), 7.34 (d, J = 7.4 Hz, 1H), 7.26 (t, J = 6.6 Hz, 2H), 7.17 (d, J
= 6.6 Hz, 1H), 7.10 (m, 4H), 2.31 (s, 3H). 13C NMR (100 MHz, CDCl3): δ 162.2 (d, J =
250.0 Hz), 148.9, 134.9, 133.8, 133.7, 131.1, 130.9, 129.9 (d, J = 8.2 Hz), 128.8, 126.4,
126.2, 116.1 (d, J = 22.4 Hz), 14.6. FTIR (NaCl): 3048, 2931, 1652, 1593, 1521, 1449,
1372, 1324, 1243, 1200, 1118, 980, 905, 767, 690, 767, 690 cm-1. HRMS: calcd [M+1]
for C15H13NO2F 258.0930 found 258.0929. MP 85–86 °C pale yellow solid.
1H NMR of 2.20e
110
13C NMR of 2.20e
NO2
MeO
Br
1-Bromo-4-[1-nitro-2 -(4-methoxyphenyl)vinyl]benzene 2.21b.1H NMR (400
MHz CDCl3): δ 8.24 (s, 1H), 7.62 (d, J = 8.4 Hz, 2H), 7.21 (d, J = 8.4 Hz, 2H), 7.06 (d, J
= 8.6 Hz, 2H), 6.79 (d, J = 8.6 Hz, 2H), 3.80 (s, 3H). 13C NMR (100 MHz, CDCl3): δ
162.2, 146.4, 135.8, 133.5, 132.9, 132.6, 130.2, 124.6, 123.4, 114.7, 55.6. FTIR (NaCl):
3048, 2967, 1644, 1601, 1517, 1484, 1379, 1303, 1258, 1174, 1069, 971, 832, 801 cm-1.
HRMS calcd for C15H13NO3Br [M+1] 334.0079 found 334.0083. MP 130–131 °C yellow
solid.
112
NO2
F
MeO
1-Fluoro-4-[1-nitro-2-(4-methoxyphenyl)vinyl]benzene 2.21c. 1H NMR (400
MHz, CDCl3): δ 8.24 (s, 1H), 7.32 (m, 2H), 7.20 (t, J = 8.6 Hz, 2H), 7.06 (d, J = 8.8 Hz,
2H), 6.76 (d, J = 8.8 Hz, 2H), 3.79 (s, 3H). 13C NMR (100 MHz, CDCl3): δ 163.7 (d, J =
250.6 Hz), 162.1, 146.5, 135.7, 133.4, 133.0 (d, J = 8.2 Hz), 127.3, 123.6, 116.8 (d, J =
21.7 Hz), 114.6, 55.6. FTIR (NaCl): 3072, 2935, 2839, 1645, 1601, 1517, 1461, 1304,
1259, 1223, 1176, 1207, 974, 833, 794 cm-1. HRMS: calcd for C15H13NO3F [M+1]
274.0879 found 274.0879. MP 129–131°C yellow solid.
1H NMR of 2.21c
113
13C NMR of 2.21c
NO2H3C
MeO
1-Fluoro-4-[1-nitro-2-(4-methoxyphenyl)vinyl]benzene 2.21d. 1H NMR (400
MHz CDCl3): δ 8.20 (s, 1H), 7.38 (t, J = 7.6 Hz, 1H), 7.31 (d, J = 7.4 Hz, 1H), 7.13 (m,
2H), 7.04 (d, J = 8.8 Hz, 2H), 6.74 (d, J = 7.0Hz, 2H), 3.80 (s, 3H), 2.39 (s, 3H). 13C
NMR (100 MHz, CDCl3): δ 162.0, 147.8, 139.4, 135.0, 133.5, 131.2, 131.1, 130.9, 129.4,
127.8, 123.9, 114.5, 55.6, 21.7. FTIR (NaCl): 3013, 2932, 2825, 1644, 1599, 1511, 1460,
1273, 1298, 1254, 1175, 1026, 880, 829, 784 cm-1. HRMS: calcd for C16H16NO3 [M+1]
270.1130 found 270.1133.
115
NO2
Br
1-Bromo-2-(2-nitro-2-phenylvinyl)benzene 2.22b. 1H NMR (400 MHz, CDCl3):
δ 8.39 (s, 1H), 7.62 (d, J = 8.0 Hz, 1H), 7.42 (m, 3H), 7.27 (dd, J = 1.4, 8.0 Hz, 2H),
7.13 (td, J = 1.7, 7.8 Hz, 1H), 7.01 (t, J = 7.8 Hz, 1H), 6.76 (dd, J = 1.4, 8.0 Hz, 1H). 13C
NMR (100 MHz, CDCl3): δ 151.8, 137.8, 133.7, 133.4, 132.5, 131.4, 131.3, 130.9, 130.7,
130.3, 129.8, 129.1, 127.4, 126.2. FTIR (NaCl): 3059, 1651, 1585, 1523, 1464, 1327,
1281, 1211, 1166, 1027, 971, 912, 863, 757, 699 cm-1. HRMS: Calcd for C14H11NO2Br
[M+1] 303.9973 found 303.9973. MP 92 – 93 °C pale yellow solid.
1H NMR of 2.22b
116
13C NMR of 2.22b
NO2
NCH3
1-Methyl-2-(2-nitro-2-phenylvinyl)-1H-pyrrole 2.23b. 1H NMR (400 MHz,
CDCl3): δ 8.33 (s, 1H), 7.51 (m, 3H), 7.33 (d, J = 4.1 Hz, 2H), 6.85 (s, 1H), 5.99 (t, J =
2.5Hz, 1H), 5.51 (d, J = 4.1Hz, 1H), 3.78 (s, 3H). 13C NMR (100 MHz, CDCl3): δ 143.7,
131.8, 130.5, 130.0, 129.7, 125.8, 123.9, 117.6, 110.9, 34.6. FTIR (NaCl): 3031, 1634,
1526, 1485, 1413, 1412, 1267, 1169, 1064, 978, 917, 740, 712, 654 cm-1. HRMS: calcd
for C13H13N2O2 [M+1] 229.0977 found 229.0978. MP 136-137 °C brown solid.
118
NO2
NCH3
Br
2-[2-(4-Bromophenyl)-2-nitrovinyl]-1-methyl-1H-pyrrole 2.23c. 1H NMR (400
MHz, CDCl3): δ 8.33 (s, 1H), 7.67 (d, J = 8.4 Hz, 2H), 7.22 (d, J = 8.4 Hz, 2H), 6.85 (s,
1H), 6.89 (s, 1H), 6.04 (t, J = 2.0 Hz, 1H), 5.61 (dd, J = 1.0, 4.3 Hz, 1H), 3.80 (s, 3H).
13C NMR (100 MHz, CDCl3): δ 142.0, 132.8, 132.1, 130.4, 129.9, 125.2, 124.1, 124.0
117.5, 110.9, 34.4. FTIR (NaCl): 3048, 1629, 1586, 1505, 1443, 1290, 1243, 1180, 1060,
979, 924, 828, 772, 750 cm-1. HRMS: calcd for C13H12N2O2Br [M+1] 307.0082 found
307.0083. MP 201-202 °C brown solid.
1H NMR of 2.23c
119
13C NMR of 2.23c
NO2
NCH3
H3C
1-Methyl-2-(2-nitro-2-m-tolylvinyl)-1H-pyrrole 2.23d. 1H NMR (400 MHz,
CDCl3): δ 8.31 (s, 1H), 7.41 (t, J = 7.6 Hz, 1H), 7.31 (d, J = 7.6 Hz, 1H), 7.12 (d, J = 8.4
Hz, 3H), 6.85 (d, J = 2.1 Hz, 1H), 6.00 (dd, J = 2.4, 4.1 Hz, 1H), 5.54 (dd, J = 1.2, 4.1
Hz, 1H), 3.79 (s, 3H), 2.40 (s, 3H). 13C NMR (100 MHz, CDCl3): δ 143.9, 139.5, 131.7,
130.9, 130.8, 129.7, 129.6, 127.4, 125.9, 123.7, 117.6, 110.9, 34.6, 21.7. FTIR (NaCl):
3042, 1630, 1526, 1483, 1411, 1275, 1064, 1010, 747 cm-1. HRMS: calcd for C14H15N2O2
[M+1] 243.1134 found 243.1134. MP 104-106 °C brownish yellow solid
121
NO2
F
O
3-[2-(4-Fluorophenyl)-2-nitrovinyl]furan 2.24b. 1H NMR (400 MHz, CDCl3): δ
8.17 (s, 1H), 7.60 (s, 1H), 7.35 (d, J = 5.3 Hz, 1H), 7.33 (d, J = 5.3 Hz, 1H), 7.24 (td, J =
2.0, 0.6 Hz, 1H), 7.22 (t, J = 8.4Hz, 2H), 5.59 (d, J = 2Hz, 1H). 13C NMR (100 MHz,
CDCl3): δ 163.8 (d, J = 251.3 Hz), 147.9, 147.4, 144.7, 133.0 (d, J = 8.2 Hz), 126.8 (d, J
= 12.7Hz), 126.7, 119.1 116.6 (d, J = 21.7 Hz), 109.2. FTIR (NaCl): 3142, 3060, 2919,
1645, 1601, 1497, 1318, 1279, 1222, 1159, 1094, 1015, 977, 845, 750, 600, 563 cm-1.
HRMS: calcd for C12H9NO3F [M+1] 234.0566 found 234.0567. MP 96-98 °C brown
solid
1H NMR of 2.24b
122
13C NMR of 2.24b
NO2
F
TsN
3-[2-(4-Fluorophenyl)-2-nitrovinyl]-1-(toluene-4-sulfonyl)-1H-indole 2.25b.
1H NMR (400 MHz, CDCl3): δ 8.43 (s, 1H), 7.95 (d, J = 8.2 Hz, 1H), 7.59 (d, J = 8.4 Hz,
3H), 7.35 (m, 4H), 7.25 (m, 4H), 6.8 (s, 1H), 3.37 (s, 3H). 13C NMR (100 MHz, CDCl3):
δ 164.0 (d, J = 252.0, Hz), 147.9, 146.1, 134.7 (d, J = 3.0 Hz), 132.6 (d, J = 8.2 Hz),
130.4, 129.6, 128.3, 127.2, 126.2, 126.1, 124.4, 119.4, 117.1 (d, J = 21.7Hz), 113.9, 21.9.
FTIR (NaCl): 3148, 2926, 1644, 1599, 1507, 1447, 1376, 1316, 1225, 1175, 1140, 1093,
123
970, 812, 759, 669, 576 cm-1. HRMS: calcd for C23H18N2O4FS [M+1] 437.0971 found
437.0975. MP 141-142 °C yellow solid.
1H NMR of 2.25b
13C NMR of 2.25b
124
NO2
F
TsN
H3C
3[2-(4-Fluoro-3-methylphenyl)-2-nitrovinyl]-1-(toluene-4-sulfonyl)-1H-indole
2.25c. 1H NMR (400 MHz, CDCl3): δ 8.41 (s, 1H), 7.96 (d, J = 8.0 Hz, 1H), 7.62 (d, J =
7.4 Hz, 1H), 7.59 (d, J = 8.4 Hz, 2H), 7.39 (td, J = 1.2, 7.4 Hz, 1H), 7.32 (td, J = 1.2, 8.0
Hz, 1H), 7.21 (m, 4H), 3.37 (s, 3H), 2.36 (s, 3H). 13C NMR (100 MHz, CDCl3): δ 162.5
(d, J = 250.6, Hz), 148.1, 146.1, 134.7 (d, J = 8.9 Hz), 133.6, 133.5, 130.3, 129.7, 129.6,
128.3, 127.2, 126.9, 126.1, 125.9, 124.4, 119.3, 116.7 (d, J = 22.4 Hz), 113.9, 21.9, 14.9.
FTIR (NaCl): 3142, 2925, 1644, 1599, 1500, 1447, 1378, 1318, 1242, 1175, 1139, 1093,
970, 906, 812, 747, 670 cm-1. HRMS: calcd for C24H20N2O4FS [M+1] 451.1128 found
451.1129. MP 182-183 °C yellow solid.
126
N
OF
Bn 1-Benzyl-4-(4-fluorophenyl)-1,6-dihydro-2H-pyridin-3-one 2.33a.
1H NMR of 2.33a
13C NMR of 2.33a
127
N
OF
O
OMe 4-(4-Fluorophenyl)-3-oxo-3,6-dihydro-2H-pyridine-1-carboxylic acid methyl ester
enone 2.33b.
1H NMR of 2.33b
128
13C NMR of 2.33b
N
OF
O
OBn
4-(4-Fluorophenyl)-3-oxo-3,6-dihydro-2H-pyridine-1-carboxylic acid benzyl ester
2.33c.
1H NMR of 2.33c
131
N
OF
O
OMe 4-(4-Fluorophenyl)-3-oxo-piperidine-1-carboxylic acid methyl ester 2.34b
1H NMR of 2.34b
13C NMR of 2.34b
132
N
F
Bn
H3CO
1-Benzyl-4-(4-fluorophenyl)-3-methoxymethylene piperidine 2.35
1H NMR of 2.35
13C NMR of 2.35
133
N
OTBSF
Bn
1-Benzyl-5-(tert-butyldimethylsilanyloxy)-4-(4-fluorophenyl)-1,2,3,6-
tetrahydropyridine 2.36a.
1H NMR of 2.36a
134
13C NMR of 2.36a
N
OTMS F
O
OMe
4-(4-Fluorophenyl)-5-trimethylsilanyloxy-3,6-dihydro-2H-pyridine-1-carboxylic
acid methyl ester 2.36b.
136
N
OHF
Bn
1-Benzyl-4-(4-fluorophenyl)-1,2,3,6-tetrahydropyridin-3-ol 2.37
1H NMR of 2.37
13C NMR of 2.37
137
N
OHF
O
OCH3
4-(4-Fluorophenyl)-3-hydroxy-3,6-dihydro-2H-pyridine-1-carboxylic acid methyl
ester 2.38
1H NMR of 2.38
138
13C NMR of 2.38
N
OF
O
OCH3
(PhO)2PO
N
OF
H3CO
O
(PhO)2PO
3-(Diphenoxyphosphoryloxy)-4-(4-fluorophenyl)-3,6-dihydro-2H-pyridine-1-
carboxylic acid methyl ester 2.39
mixture of rotomers
140
N
F
O OCH3
SiMe2(OPr-i)
N
F
H3CO O
SiMe2(OPr-i)
4-(4-Fluorophenyl)-3-[(isopropoxydimethylsilanyl)methyl]-3,6-dihydro-2H-
pyridine-1-carboxylic acid methyl ester 2.40
Mixture of rotomers
1H NMR of 2.40
141
13C NMR of 2.40
N
F
O OCH3
OH
4-(4-Fluorophenyl)-3-hydroxymethyl-3,6-dihydro-2H-pyridine-1-carboxylic acid
methyl ester 2.41
143
N
F
O OCH3
OH
4-(4-Fluorophenyl)-3-hydroxymethylpiperidine-1-carboxylic acid methyl ester 2.42
1H NMR of 2.42
145
N
F
O OCH3
O O
O
3-(Benzo[1,3]dioxol-5-yloxymethyl)-4-(4-fluorophenyl)piperidine-1-carboxylic acid
methyl ester 2.43
1H NMR of 2.43
146
13C NMR of 2.43
N
OHF
O
OBn
4-(4-Fluorophenyl)-3-hydroxy-3,6-dihydro-2H-pyridine-1-carboxylic acid benzyl
ester 2.44
148
N
OF
O
OBn
(PhO)2PO
N
OF
BnO
O
(PhO)2PO
3-(Diphenoxyphosphoryloxy)-4-(4-fluorophenyl)-3,6-dihydro-2H-pyridine-1-
carboxylic acid benzyl ester 2.45
mixture of rotomers
1H NMR of 2.45
149
13C NMR of 2.45
CbzN
OO
O
F
3-(Benzo[1,3]dioxol-5-yloxymethyl)-4-(4-fluorophenyl)-3,6-dihydro-2H-pyridine-1-
carboxylic acid benzyl ester 2.46
151
2.8 References 1 For selected reviews on the aldol reaction, see: (a) Palomo, C.; Oiaride, M.; Garcia, J. M.; Chem. Eur. J. 2002, 8, 37. (b) Machajewski, T. D.; Wong, C.-H. Angew. Chem. Int. Ed. 2002, 39, 1353. (c) Denmark, S. E.; Stavenger, R. A. Acc. Chem. Res. 2000, 33, 432. (d) Nelson, S. G. Tetrahedron Asymmetry 1998, 9, 357. 2 For selected reviews on the Michael reaction, see: (a) Krause, N.; Hoffman-Roder, A. Synthesis 2001, 2, 271. (b) Gorobets, E. V.; Miftakhov, M. S.; Valeev, F. A. Russ. Chem. Rev. 2000, 69, 1001. (c) Johnson, J. S.; Evans, D. A.Acc. Chem. Res. 2000, 33, 325. (d) Shibasaki, M.; Sasai, H. Top. Stereochem. 1999, 22, 201. (e) Christoffers, J. Eur. J. Org. Chem. 1998, 7, 1259. (f) Krause, N. Angew. Chem. Int. Ed. 1998, 37, 283. 3 Stork, G.; Rosen, P.; Godman, N. L. J. Am. Chem. Soc. 1961, 83, 2965. (b) Stork, G.; Rosen, P.; Goldman, N.; Coombs, R. V.; Tsuji, J. J. Am. Chem. Soc.1965, 87, 275. 4 For selected reviews on nucleophilic catalysis see: (a) Dalko, P. I.; Moisan, L. Angew. Chem. Int. Ed. 2001, 40, 3726. (b) Enders, D.; Grondal, C.; Huttl, M. R. M. Angew. Chem. Int. Ed. 2007, 46, early view, DOI: 10.1002/anie.200603129 5 For Krische’s reaction in nucleophilic catalysis area, see: (a) Cho, C.-W.; Kong, J. R.; Krische, M. J. Org. Lett. 2004, 6, 1337. (b) Cho, C.-W.; Krische, M. J. Angew. Chem. Int. Ed. 2004, 43, 6689. (c) Park, H.; Cho, C. -W.; Krische, M. J. J. Org. Chem. 2006, 71, 7892. (d) Wang, J. C.; Ng, S. S.; Krische, M. J. J. Am. Chem. Soc. 2003, 125, 3682. (e) Wang, J.-C.; Krische, M. J. Angew. Chem. Int. Ed. 2003, 42, 5855. (f) Jellerichs, B. G.; Kong, J. R.; Krische, M. J. J. Am. Chem. Soc. 2003, 125, 7758. (g) Wang L.–C.; Luis, A. L.; Agapiou, K.; Jang, H.–Y.; Krische, M. J. J. Am. Chem. Soc. 2002, 124, 2402. (h) Agapiou, K.; Krische, M. J. Org. Lett. 2003, 5, 1737-1740. 6 For selected reviews on nickel-catalyzed of preformed enolate arylation, see: (a) Semmelhack, M. F.; Stauffer, R. D.; Rogerson, T. D. Tetrahedron Lett. 1973, 45, 4519. (b) Millard, A. A.; Rathke, M. W.; J. Am. Chem. Soc. 1977, 99, 4833. (c) Fauvarque, F.; Jutand, A. J. Organomet. Chem. 1979, 177, 273. 7 For selected reviews on palladium-catalyzed arylation of preformed enolates, see: (a) Kosugi, M.; Hagiwara, I.; Sumiya, T.; Migita, T. Bull. Chem. Soc. Jpn. 1984, 57, 242. (b) Kosugi, M.; Negishi, Y.; Kameyama, M. Migita, T. Bull. Chem. Soc. Jpn. 1985, 58, 3383. (c) Kawajima, I.; Nakamura, E. Acc. Chem. Res. 1985, 18, 181. (d) Galarini, R.; Musco, A.; Pontellini, R.; Santi, R. J. Mol. Catal. 1992, 72, L11. 8 For selected reviews on palladium-catalyzed direct arylation of ketones, see: (a) Palucki, M.; Buckwald, S. L.; J. Am. Chem. Soc. 1997, 119, 11108. (b) Hamann, B. C.; Hartwig, J. F. J. Am. Chem. Soc. 1997, 119, 12382. (c) Satoh, T.; Kawamura, Y.; Miura,
152
M.; Nomura, M. Angew. Chem. Int. Ed. 1997, 36, 1740. (d) Kawatsura, M.; Hartwig, J. F. J. Am. Chem. Soc. 1999, 121, 1473. (e) Fox, J. M.; Huang, X.; Chieffi, A.; Buchwald, S. L. J. Am. Chem. Soc. 2000, 122, 1360. 9 For selected reviews on asymmetric nickel/ palladium-catalyzed direct arylation of ketones, see: (a) Ahman, J.; Wolfe, J, P.; Troutman, M. V.; Palucki, M.; Buchwald, S. L. J. Am. Chem. Soc. 1998, 120, 1918. (b) Hamada, T.; Chieffi, A.; Ahman, J.; Buchwald, S. L. J. Am. Chem. Soc. 2002, 124, 1261. (c) Lee, S.; Hartwig, J. F. J. Org. Chem. 2001, 66, 3402. (d) Spielvogel, D.; Buchwald, S. L. J. Am. Chem. Soc. 2002, 124, 3500. 10 For selected reviews encompassing the use of arylbismuth(V) reagents, see: (a) Freedman, L. D.; Doak, G. O. Chem. Rev. 1982, 82, 15. (b) Barton, D. H. R.; Finet, J.-P. Pure Appl. Chem. 1987, 59, 937. (c) Abramovitch, R. A.; Barton, D. H. R.; Finet, J.-P.; Tetrahedron 1988, 44, 3039. (d) Finet, J.-P. Chem. Rev. 1989, 89, 1487. 11 Barton D. H. R.; Lester, D. J.; Motherwell, W. B.; Papoula, T. B. J. Chem. Soc. Chem. Commun. 1980, 246. 12 For arylation of β-dicarbonyl compounds using bismuth(V) reagents, see: (a) Barton, D. H. R.; Blazejewski, J.-C.; Charpiot, B.; Finet, J.-P.; Motherwell, W. B.; Papoula, M. T. B.; Stanforth, S. P. J. Chem. Soc., Perkin Trans. 1 1985, 2667. (b) Barton, D. H. R.; Charpiot, B.; Motherwell, W. B. Tetrahedron Lett. 1982, 23, 3365. (c) Barton, D. H. R.; Blazejewski, J. C.; Charpiot, B.; Lester, D. J.; Motherwell, W. B.; Barros Paoula, M. T. J. Chem. Soc. Chem. Commun. 1980, 827. 13 For selected reviews on c-arylation of phenols using bismuth(V) reagents, see: (a) Barton, D. H. R.; Bhatnagar, N. Y.; Blazejewski, J.-C.; Charpiot, B.; Finet, J.-P.; Lester, D. J.; Motherwell, W. B.; Papoula, M. T. B.; Stanforth, S. P. J. Chem. Soc., Perkin Trans. 1 1985, 2657. (b) Barton, D. H. R.; Bhatnagar, N. Y.; Finet, J.-P.; Khamsi, J.; Motherwell, W. B.; Stanforth, S. P. Tetrahedron 1987, 43, 323. 14 For arylation of preformed enolates using bismuth(V) reagents, see: Arnauld, T.; Barton, D. H. R.; Normant, J.-F.; Doris, E. J. Org. Chem. 1999, 64, 6915 and references therein (b) Ooi, T.; Goto, R.; Maruoka, K. J. Am. Chem. Soc. 2003, 125, 10494. 15 Barton, D. H. R.; Bhatnagar, N. Y.; Finet, J. –P.; Motherwell, W. B. Tetrahedron 1986, 42, 3111. 16 (a) Beletskaya, I. P.; Cheprakov, A. V. Chem. Rev. 2000, 100, 3009. (b) Koelsch, C. F.; Boekelheide, V. J. Am. Chem. Soc.1944, 66, 412. 17 Koech, P. K.; Krische, M. J. J. Am. Chem. Soc. 2004, 126, 5350.
153
18 Finet, J. P.; Combes, S. Synth. Commun. 1996, 26, 4569. 19 For selected reviews on nitroalkenes in organic synthesis, see: (a) Corey, E. J.; Estreicher, H. J. Am. Chem. Soc. 1978, 100, 6294. (b) Seebach, D.; Colvin, E. W.; Lehr, F.; Weller, T. Chimia 1979, 33, 1. (c) Barrett, A. G. M.; Graboski, G.; Chem. Rev. 1986, 86, 751. (d) Rosini, G.; Ballini, R. Synthesis 1988, 833. (e) Barrett, A. Chem Soc. Rev. 1991, 20, 95. 20 For nitroalkenes as dienophiles in Diels-Alder reactions, see: (a) Ranganathan, D.; Rao, C. B.; Ranganathan, S.; Mehrotra, A. K.; Iyengar, R. J. Org. Chem. 1980, 45, 1185. (b) Corey, E. J.; Estreicher, H. Tetrahedron Lett. 1981, 22, 603. (c) Ono, N.; Miyake, H.; Kaji, A. J. Chem. Soc., Chem. Commun. 1982, 33. (d) Kurth, M. J.; O’Brien, M. J.; Hope, H.; Yanuck, M. J. J. Org. Chem. 1985, 50, 2626. (e) Baruah, P. D.; Mukherjee. S.; Mahajan, M. P. Tetrahedron 1990, 46, 1951. (f) Enders, D.; Meyer, O.; Raabe, G. Synthesis, 1992, 1242.
21 For selected reviews on conjugate addition to nitroalkenes, see: (a) Pecunioso, A.; Menicagli, R. J. Org. Chem. 1989, 54, 2391. (b) Schafer, H.; Seebach, D. Tetrahedron 1995, 51, 2305. (c) Versleijen, J. P. G.; Leusen, A. M. V.; Feringa, B. L. Tetrahedron Lett. 1999, 40, 5803. (d) Ji, J.; Barnes, D. M.; Zhang, J.; King, S. A.; Wittenberger, S. J.; Morton, H. E. J. Am. Chem. Soc. 1999, 121, 10215. (e) Hayashi, T.; Senda, T.; Ogasawara, M. J. Am. Chem. Soc. 2000, 122, 10716. (f) Luchaco-Cullis, C. A.; Hoveyda, A. H. J. Am. Chem. Soc. 2002, 124, 8192.
22 (a) Kabalka, G. W.; Varma, R. S. Org. Prep. Proc. Int. 1987, 19, 283. 23 For nitroalkenes as insecticides, see : (a) Bousquet, E. W.; Kirby, J. E.; Searle, N. E. U.S. Patent 2,335,384, 1943; Chem. Abstr. 1944, 38, 2834. 24 For antifungal activity of nitroalkenes, See: (a) Brian, P. W.; Grove, J. F.; McGowan, J. C. Nature 1946, 158, 876. (b) McGowan, J. C.; Brian, P. W.; Hemming, H. G. Ann. Appl. Biol. 1948, 35, 25. 25 For antibacterial activity of nitroalkenes, see: (a) Schales, O.; Graefe, H. A. J. Am. Chem. Soc. 1952, 74, 4486. (b) Milhazes, N.; Calheiros, R.; Marques, M. P. M.; Garrido, J.; Cordeiro, M. N. D.S.; Rodrigues, C.; Quinteira, S.; Novais, C.; Peixe, L.; Borges, F. Bioorg. Med. Chem. 2006, 14, 4078.
26 For nitroalkenes as antitumor agents, see: (a) Zee-Cheng, K.-Y.; Cheng, C. C. J. Med. Chem. 1969, 12, 157. (b) Kim, J. H.; Kim, J. H.; Lee, G. E.; Lee, J. E.; Chung, I. K. Mol. Pharmacol. 2003, 63, 1117.
154
27 For a review, see: Gunasekara, N. G.; Noble, S.; Benfield, P. Drugs, 1998, 55, 85. 28 Physical resolution of racemates: (a) Christensen, J. A.; Squires, R. F. German Patent 2,404,113, 1974; Chem. Abstr. 1974, 81, 152011q. (b) Stemp, J. A.; Miller, D.; Martin, R. T. Eur. Patent 0190496, 1985; Chem. Abstr. 1987, 106, 18361. (c) Faruk, E. A.; Martin, R. T. EP Patent 223,334,1986; Chem. Abstr. 1987, 107, 96594. (d) Willcocks, K.; Barnes, R. D.; Rustidge, D. C.; Tidy, D. J. D. J. Labelled Compd. Radiopharm. 1993, 33, 783. (e) Engelstoft, M.; Hansen, J. B. Acta Chem. Scand. 1996, 50, 164. (f) Istvan, B.; Laszlo, C.; Laszlo, D.; Kalman, H.; Istvan, H.; Janos, K.; Andras, N.; Eva, W. P.; Juhaszida, D.; Judit, N. B. U. S. Patent 6657062, 1997; Chem. Abstr. 1998, 128, 127941. (g) Sugi, K.; Itaya, N.; Katsura, T.; Igi, M.; Yamakazi, S.; Ishibashi, T.; Yamaoka, T.; Kawada, Y.; Tagami, Y. Eur. Patent 0812827, 1997; Chem. Abstr. 1998, 128, 75308. (h) Kreidl, J.; Czibula, L.; Nemes, A.; Deutschne, J. I.; Werkne Papp E.; Nagyne Bagdy J.; Dobay, L.; Hegedus, I.; Harsanyi, K.; Borza, I. WO Patent 9801424, 1998; Chem. Abstr. 1998, 128, 127941. (i) Czibula, L.; Nemes, A.; Sebök, F.; Szántay, C. Jr.; Mák, M. Eur. J. Org. Chem. 2004, 3336. 29 Enzyme catalyzed asymmetric transformations: (a) Zepp, C. M.; Gao, Y.; Heefner, D. L. U. S. Patent 5,258,517, 1993; Chem. Abstr. 1993, 120, 217289. (b) Curzons, A. D.; Powell L. W.; Keay, A. M. WO Patent 9322284, 1993; Chem. Abstr. 1993, 120, 163991. (c) Yu, M. S.; Jacewicz, V. W.; Shapiro, E. WO Patent, 9853824, 1998; Chem. Abstr. 1998, 128, 151093. (d) Gledhill, L.; Kell, C. M. WO Patent 9802556, 1998; Chem. Abstr. 1998, 128, 151093. (e) Yu, M. S.; Lantos, I.; Yu, P. Z.-Q. J.; Cacchio, T. Tetrahedron Lett. 2000, 41, 5647. (f) Gonzalo, G. D.; Brieva, R.; Sánchez, V. M.; Bayod, M.; Gotor, V. J. Org. Chem. 2001, 66, 8947. 30 Chiral auxiliary based approaches: (a) Amat, M.; Hildago, J.; Bosch, J. Tetrahedron Asymmetry, 1996, 7, 1591. (b) Adger, B. M.; Potter, G. A.; Fox, M. E. WO Patent 9724323, 1997. Chem. Abstr. 1997, 127, 149075. (c) Murthy, K. S. K.; Rey, A. W. U. S. Patent 5962689, 1999. WO Patent 9907680, 1999; Chem. Abstr. 1999, 130, 182361. (d) Amat, M.; Bosch, J.; Hildago, J.; Canto, M.; Perez, M.; Llor, N.; Molins, E.; Miravitlles, C.; Orozco, M.; Luque, J. J. Org. Chem. 2000, 65, 3074. (e) Cossy, J.; Mirguet, O.; Pardo, D. G.; Desmurs, J.-R., Tetrahedron Lett. 2001, 42, 7805. (f) Cossy, J.; Mirguet, O.; Pardo, D. G.; Desmurs, J.-R. New J. Chem. 2003, 27, 475. (g) Yamada, S.; Jahan, I. Tetrahedron Lett. 2005, 46, 8673. 31 Asymmetric deprotonation using chiral bases: (a) Johnson, T. A.; Curtis, M. D.; Beak, P. J. Am. Chem. Soc. 2001, 123, 1004. (b) Greenhalgh, D. A.; Simpkins, N. S. Synlett 2002, 2074. (c) Gill, C. D.; Greenhalgh, D. A.; Simpkins, N. S. Tetrahedron 2003, 59, 9213.
155
32 Catalytic enantioselective transformations: (a) Taylor, M. S.; Jacobsen, E. N. J. Am. Chem. Soc. 2003, 125, 11204. (b) Hughes, G.; Kimura, M.; Buchwald, S. L. J. Am. Chem. Soc. 2003, 125, 11253. 33 Naturally occurring chiral starting materials: (a) Cossy, J.; Mirguet, O.; Pardo, D. G.; Desmurs, J.-R., Tetrahedron Lett. 2001, 42, 5705. (b) Cossy, J.; Mirguet, O.; Pardo, D. G.; Desmurs, J.-R., Eur. J. Org. Chem. 2002, 35, 3543. 34 Chen, L. C.; Wang, E.–C.; Lin, J.-H.; Wu, S.–S.; Heterocycles, 1984 , 22, 2769. 35 Fortunato, J. M.; Ganem, B. J. Org. Chem. 1976, 41, 2194. 36 For enantioselective protonation of enol silanes related to reactions see: (a) Ishihara, K.; Kaneeda, M.; Yamamoto, H. J. Am. Chem. Soc. 1994, 116, 11179. (b) Ishihara, K.; Nakamura, S.; Kaneeda, M.; Yamamoto, H. J. Am. Chem. Soc. 1996, 118, 12854. (c) Ishihara, K.; Nakashima, D.; Hiraiwa, Y.; Yamamoto, H. J. Am. Chem. Soc. 2003, 125, 24. (d) Yanagisawa, A.; Touge, T.; Arai, T. Angew. Chem. Int. Ed. 2005, 44, 1546. 37 For selected reviews encompassing enantioselective protonation of enol silanes, see: (a) Fehr, C. Angew. Chem., Int. Ed. Engl. 1996, 35, 2567. (b) Yanagisawa, A.; Ishihara, K.; Yamamoto, H. Synlett 1997, 411. (c) Duhamel, Lucette; Duhamel, Pierre; Plaquevent, J.-C. Tetrahedron: Asymmetry 2004, 15, 3653. 38 For a review, see: Corey, E. J.; Helal, C. J. Angew. Chem. Int. Ed. 1998, 37, 1986. 39 For anti-selective copper-mediated SN2’ allylic substitution of allylic phosphates, see: (a) Chong, J. M.; Belelie, J. L. J. Org. Chem. 2001, 66, 5552. (b) Chong, J. M.; Belelie, J. L. J. Org. Chem. 2002, 67, 3000. (c) Calaza, M. I.; Hupe, E.; Knochel, P. Org. Lett. 2003, 5, 1059. (d) Dieter, R. K.; Gore, V. K.; Chen. N. Org. Lett. 2004, 6, 763. 40 (a) Tamao, K.; Ishida, N. Tetrahedron Lett. 1984, 25, 4245. (b) Tamao, K.; Ishida, N.; Kumada, M. Org. Synth. 1990, 69, 96. (c) Matsuumi, M.; Ito, M.; Kobayashi, Y. Synlett 2002, 1508. 41 Crabtree, R. H.; Davis, M. W. J. O,rg. Chem. 1986, 51, 2655. 42 For reviews encompassing substrate-directed hydrogenation, see: (a) Brown, J. M. Angew. Chem. Int. Ed. Engl. 1987, 26, 190. (b) Hoveyda, A. H.; Evans, D. A.; Fu, G. C. Chem. Rev. 1993, 93, 1307. 43 (a) Mitsunobu, O. Synthesis 1981, 1. (b) Shi, Y.-N.; Hughes, D. L.; McNamara, J. M. Tetrahedron Lett. 2003, 44, 3609.
156
44 Gilligan, P.J.; Cain, G. A.; Christos, T. E.; Cook, L.; Drummond, S.; Johnson, A. L.; Kergaye, A. A.; McElroy, J. F.; Rohrbach, K. W.; Schmidt, K. W.; Tam, S. M. J. Med. Chem. 1992, 35, 4344. 43 Mikami, T.; Harada, M.; Naraka, K. Chem. Lett. 1999, 425. 46 Majetich, G.; Liu, S.; Fang, J.; Siesel, D.; Zhang, Y. J. Org. Chem. 1997, 62, 6928. 47 Kojima, M; Sakuragi, H.; Tokumaru, K. Bull. Chem. Soc. Jpn. 1987, 60, 3331. 48 Prasad, B. S. A.; Knochel, P. Tetrahedron, 1997, 53, 1671. 49 Syper, L. Tetrahedron 1987, 43, 2853. 50 Anand, R. C., Ranjan, H. Indian J. Chem. 1984, 23B, 1054. 51 Desai, R. C.; Meurer, L. C.; Finke, P. E. Tetrahedron Lett. 2002, 43, 4569. 52 Nakamura, E.; Shimada, J.; Kuwajima , I. J. Chem,Soc. Commun. 1983, 498. 53 Clinch, K.; Marquez, C. J.; Parrott, M. J.; Ramage, R. Tetrahedron 1989, 45, 239. 54 Dana, P. G.; Thuan, M. S. L. T. Bull. Soc. Chim. Fr. 1974, 2089. 55 Mampreian, D. M.; Hoveyda, A. H. Org. Lett. 2004, 6, 2829. 56 McNulty, J.; Steere, J. A.; Wolf, S. Tetrahedron Lett. 1998, 39, 8013. 57 Haginoya, N.; Kobayashi, S.; Komoriya, S.; Yoshino, T.; Suzuki, M.; Shimada, T.; Watanabe, K.; Hirokawa, Y.; Furugori, T.; Nagahara, T. J. Med. Chem. 2004, 47, 5167. 58 Buchi, G.; Mak, C.-P. J. Org. Chem. 1977, 42, 1784. 59 (a) Yamamura, K.; Watarai, S.; Kinugas, T. Tetrahedron Lett. 1972, 28, 2829. (b) Hata, E.; Yomada, T.; Mukaiyama, T. Bull. Chem. Soc. Jpn. 1995, 68, 3629. 60 Still, W. C.; Kahn, M; Mitra, A. J. Org. Chem. 1978, 43, 2. 61 Wittig, G.; Boell, W.; Krueck, K. H. Chem. Ber. 1962, 95, 2514.
157
Chapter 3: Copper-Catalyzed Enantioselective Tandem Conjugate Addition-Arylation Using Bismuth(V) Reagents 3.1 Introduction
Tandem C-C bond forming transformations are attractive synthetic methods, as
they enable a rapid increase in molecular complexity from readily available starting
materials.1,2 The advantage of these transformations is the ability to form several bonds
and multiple contiguous stereogenic centers in a single manipulation utilizing a single
catalyst without isolation and purification of the intermediates. The development of
tandem transformations relies on latent functionality, meaning reaction on one site of a
molecule induces a reaction at a different site. Potential functional groups for tandem
reactions are enones, enals and enoates which can undergo conjugate addition (CA)
followed by subsequent electrophilic trapping of the resulting nucleophilic enolate.3 This
type of tandem conjugate addition-electrophilic trapping strategy was first employed by
Stork in the total synthesis of lycopodine (Scheme 3.1).4
O
H3C
OCH3
MgBr
CuCl (10 mol%)
1)
2)Br
O
H3COCH3 N
HO
H3C H
3.3 Lycopodine3.1 3.2
Scheme 3.1 Stork’s application of tandem conjugate addition-alkylation in total synthesis
of lycopodine
Subsequent to Stork’s seminal report, application of conjugate addition-
electrophilic trapping reaction has increased dramatically in the chemical literature.5 Such
methods include the copper-catalyzed conjugate addition of Grignard reagents to α,β-
158
unsaturated carbonyl compounds and trapping of the incipient enolates with classical
electrophiles such as alkyl halides,6 carbonyls,7 acylating agents,8 Michael acceptors,9
and iminium ions. 10 These catalytic tandem conjugate addition-electrophilic trapping
transformations are useful, however greater versatility and higher yields are obtained
when stoichiometric organocuprate reagents are employed. Additionally, these reactions
are not enantioselective. In the last decade catalytic asymmetric conjugate addition
methods have received considerable interest and the Krische group has made
contributions to this field.
159
3.2 Asymmetric Copper-Catalyzed Tandem Conjugate Addition-
Electrophilic Trapping Reactions
3.2.1 Mechanistic Features
Catalytic conjugate addition of Grignard reagents to α,β-usaturated carbonyl
compounds is one of the oldest and well developed transformations. However,
asymmetric variants of these transformations are under developed. Conversely, in the last
decade, highly enantioselective Cu-catalyzed conjugate addition reaction of organozinc
reagents to α,β-unsaturated carbonyl compounds have been studied extensively. 11
Effective methods for asymmetric conjugate addition of alkylzinc reagents to cyclic
enones,12 including the more challenging cyclopentenones,13 lactones,14 nitroalkenes,15
and acyclic enones16 have been developed. A simplified mechanism for asymmetric
conjugate addition starts with a chiral copper(I) complex A, alkyl transfer from R2Zn to
this copper complex A results in alkylcopper complex B (Scheme 3.2). Simultaneous
complexation of the enone carbonyl by the alkylzinc fragment and the coordination of the
alkylcopper complex to the π-bond give the bimetallic complex C. This bimetallic
complex provides a rigid transition state which translates to high levels of stereocontrol.
Subsequent alkyl transfer to the β-terminus of the enone generates a zinc enolate, which
can be trapped by a variety of electrophiles such as aldehydes, ketones, carboxylates and
alkyl halides in tandem protocols.
160
LnCuX[LnCu-R]
RZnX
O
CuR
Ln
ZnR
O OZnR
R
R2Zn
O
R
EE+
X
AB
C
Scheme 3.2 Catalytic cycle for copper-catalyzed conjugate addition of organozinc
reagents to enones
3.2.2 Copper-Catalyzed Asymmetric Tandem Conjugate Addition-Electophilic
Trapping Reactions Involving Organozinc Reagents
In 1997 Feringa and co-workers reported the first catalytic asymmetric tandem
conjugate addition of organozinc reagents to α,β−usaturated carbonyl compounds with
subsequent trapping of the resulting enolate with aldehydes (Scheme 3.3). 17 This
asymmetric tandem conjugate addition-aldol reaction involving dimethylzinc and 2-
cyclohexenone 3.4 provides trans-2,3-disubstituted cyclohexanone 3.6 in the presence of
a copper(I) salt and phosphoramidite ligand 3.8. In this transformation complete control
of both relative and absolute stereochemistry is achieved in vicinal functionalization of
both cyclohexenone and cyclopentenone. The synthetic utility of the asymmetric tandem
conjugate addition/aldol was demonstrated in total synthesis of PGE1 (prostaglandin E1)
methyl ester (Scheme 3.4).13a, 17d
161
O
+ CH3
Cu(OTf)2 (1.2 mol%)3.8 (2.4 mol%)
toluene, -30 °C
O OHCH3
H
MeMe2Zn
H
O
61%, 97% ee
O
OP N
Ph
Ph
CH3
CH3
3.8
O OCH3
H
Me
PCC
3.4 3.5 3.6 3.7
Scheme 3.3 The asymmetric tandem conjugate addition-aldol involving organozinc
reagents
O
OO
PhPh
+H
O SiMe2Ph
CO2MeZn
2
Cu(OTf)2 (3 mol%3.8 (6 mol%)
toluene, -45 °C
O
OO
PhPh
OH SiMe2PhH
CO2Me
OH OHH
CO2MeO
3.13 PGE1 methyl ester7% yield (7 steps)94% ee
3.9
3.10
3.113.12
Scheme 3.4 Application of asymmetric tandem conjugate addition-aldol reaction in total
synthesis of PGE1 methyl ester
In 2004 Krische and co-workers reported a copper-catalyzed conjugate
addition/intramolecular electrophilic trapping transformation that utilize ketones, esters
and nitriles as terminal electrophiles (Scheme 3.5).18 Enone substrates containing an
appendant ketone, ester or nitrile functionality undergo conjugate addition in the presence
of organozinc reagents and catalytic Cu(OTf)2/P(OEt)3 followed by electrophilic trapping
162
to provide bicyclic products in excellent yields and modest diastereoselectivity. When the
phosphoramidite lingand 3.8 is used in place of P(OEt)3, asymmetric tandem conjugate
addition-aldol is achieved in high yields and excellent enantioselectivity. This
transformation represents the first use of ketones, esters and nitriles as electrophiles in
copper-catalyzed conjugate addition-electrophilic trapping.
O
Ph O
Me O OMe
OHPh O
80% ee
OMe
OHPh O
+
98% ee
Cu(OTf)2 ( 2.5 mol%)3.8 (5 mol%)
Et2Zn (150 mol%)toluene, -40 °C
99% yield (2.3:1) dr
Et Et
3.14 3.15 3.16
Scheme 3.5 Copper-catalyzed asymmetric intramolecular conjugate addition-aldol
reaction
The zinc enolates generated via asymmetric conjugate addition of organozinc
reagents to enones can be trapped by π-allyls obtained through palladium ionization of
allylic acetate to provide 2,3-disubstituted enones 3.17 in good yields and excellent
enantioselectivity (Scheme 3.6).19 Feringa and co-worker subjected the product of this
reaction to Wacker oxidation to obtain a ketone which was then subjected to base
promoted annulation to afford bicyclic product 3.18.
O1) Cu(OTf)2 (2 mol%)
3.8 (4 mol%)Et2Zn
toluene
2) Pd(PPh3)4 (4 mol%)
OAc
O
Et
3.4 3.17
O
HEt
1) PdCl2 (10 mol%)CuClDMF/H2O, O2
2) tBuOK THF, RT
3.1813:1 dr,96% ee
Scheme 3.6 Copper-catalyzed asymmetric conjugate addition-allylation reaction
163
Hoveyda and co-workers have developed peptide derived chiral ligand 3.22 for an
asymmetric copper-catalyzed conjugate addition of dialkylzinc reagents to α,β-
unsaturated carbonyl compounds in excellent yields and excellent enantioselectivity.16
This asymmetric conjugate addition results in the generation of a zinc enolate, which can
be trapped by alkyl halides and tosylates to provide products with contiguous
stereocenters (Scheme 3.7). The use of the peptide-based chiral phosphine ligand has
enabled functionalization of six, seven and the more challenging five membered cyclic
enones in excellent enantioselectivity. This methodology has been applied in a concise
total synthesis of anti-cancer clavularin B 3.21 in only four steps with 42% overall
yield.13b
O (CuOTf)2·C6H6 (1 mol%)3.22 (2.4 mol%) Me2Zn (3 equiv)
4-iodo-1-butene (10 equiv)HMPA (10 equiv)
O O
Me
O
Me
Me
80%, >15:1 dr97% ee
3.21, clavularin B
PPh2
NO
HN
MeMeO
NHBu
Ph
3.22
3.19 3.20
Scheme 3.7 Hoveyda’s asymmetric Copper-catalyzed conjugate addition-alkylation
reaction
3.2.3 Copper-Catalyzed Asymmetric Tandem Conjugate Addition-Electophilic
Trapping Reactions Involving Grignard Reagents
Enantioselective conjugate addition of Grignard reagents to α,β-unsaturated
carbonyl compounds was the first asymmetric transformation to be studied.20 This work
164
focused mainly on the chiral auxiliary approach, using readily available chiral alcohols,
amines and thiols. In 1988, Lippard and co-workers reported the first enantioselective
catalytic conjugate addition of Grignard reagents to enones using chiral amide ligands.21
Subsequent to this seminal report several methods involving chiral thiolates22 and chiral
monophosphine23 ligands were reported. However, enantioselectivities for these reactions
rarely surpassed 90% ee. Tomioka’s asymmetric conjugate addition of BuMgCl to
cyclohexenone 3.4 using chiral amidophosphine (Scheme 3.8) 23c and Sammakia’s
conjugate addition reaction that utilize chiral ferrocenyl monophosphine.23d are rare
exceptions.
O
3.24 (32 mol%)
O
nBu
96%92% ee
CuI (8 mol%)
nBuMgCl
N
t-Bu O
PPh2
3.24
3.4 3.23
Scheme 3.8 Asymmetric conjugate addition of Grignard reagents to enones using
amidophosphine 3.24
The major problem limiting the development of highly enantioselective copper-
catalyzed conjugate addition of Grignard reagents to α,β-unsaturated carbonyl
compounds is the competing uncatalyzed background reaction. Another challenge is
stopping the competing 1,2-addition of the Grignard reagent to the carbonyl group. The
advantage of using Grignard reagents over dialkylzinc reagents is that they are
inexpensive, readily available and all the alkyl groups in the reagent can be transferred. In
an effort to address these problems, Feringa and co-workers have developed a highly
165
enantioselective copper-catalyzed conjugate addition of Grignard reagents to enones and
enoates with selectivity up to 98% ee using ferrocenyl diphosphine ligands (Scheme
3.9). 24 Trapping of the magnesium enolates generated via enantioselective copper-
catalyzed conjugate addition to enones with reagents other than water is unknown. Herein
we report the first enantioselective conjugate addition of Grignard reagents to
cyclohexenone with subsequent electrophilic trapping of the resulting enolate with aryl
groups from a bismuth(V) reagent
OCuCl (5 mol%)
TaniaPhos (6 mol%)
Et2O, 0 °C
O
Et
69%96% ee
EtMgBr
Fe PPh2
Me2N PPh2
3.26 TaniaPhos
3.4 3.25
Scheme 3.9 Copper-catalyzed asymmetric conjugate addition on Grignard reagents to
enones using ferrocenyl diphosphine ligands
166
3.3 Copper-Catalyzed Enantioselective Tandem Conjugate Addition of Grignard Reagents to Enones-Arylation Using Bismuth(V) Reagents 3.3.1 Optimization
Our studies began with examination of 2-cyclohexenone 3.4. Exposure of 3.4 to
EtMgBr (120 mol) in the presence of CuCl (5 mol%) and Taniaphos 3.26 (6 mol%) at
0 °C in Et2O solvent (0.1 M), for 10 min, followed by addition of commercially available
Ph3BiCl2 (150 mol%) in THF gave the product 3.27 in 10% isolated yield and 91% ee as
a single stereoisomer as determined by 1H NMR analysis (Table 3.1, entry 1). It was
speculated that the magnesium enolate might aggregate in solution and thus addition of
hexamethylphosphoramide (HMPA) would help break these aggregates increasing
enolate reactivity. Gratifyingly, addition of HMPA (120 mol%) gave an increase in yield
of 3.27 to 34% (Table 3.1, entry 2). Under identical conditions, but increasing the loading
of Ph3BiCl2 from 150 mol% to 200 mol% the yield of 3.27 improved to 50% (Table 3.1,
entry 3). A potential problem in this reaction is the competing 1,2-addition of the
Grignard reagent to the enone. We speculated that decreasing the reaction temperature to
-78 °C would slow down this competing pathway. Indeed, a decrease in temperature to -
78 °C led to a 63% isolated yield of 3.27 (Table 3.1, entry 4). Performing the reaction in
MeOtBu as a solvent gave 3.27 in 60% isolated yield and 96% ee (Table 3.1, entry 5).
Finally by using CuBr•SMe2 in place of CuCl we could obtain 3.27 in 62% yield and
96% ee. These reaction conditions represent our standard conditions for conjugate
addition-arylation (Table 3.1, entry 6).
167
Table 3.1 Optimization for Copper-catalyzed enantioselective tandem conjugate addition-
arylation of 3.4
Et
PhOO 1) CuX (5 mol%)
TaniaPhos (6 mol%) EtMgBr (120 mol%) Solvent (0.1M), Temp °C
2) Additive (120 mol%) Ph3BiCl2, THF
3.4
Entry Solvent Additive Temp °C %Yield %ee
2
3
HMPA
HMPA
HMPA
0 °C
0 °C
-78 °C
34 90
50
63
92
92
Ph3BiCl2 (mol%)
150
200
2004
MeOtBu HMPA -78 °C 62 962006
1 - 0 °C 10 91150Et2O
Et2O
Et2O
Et2O
MeOtBu HMPA -78 °C 60 962005
CuX
CuCl
CuCl
CuCl
CuCl
CuCl
CuBr·SMe2
3.27
3.3.2 Substrate Scope
Under these standard conditions, the substrate scope of the tandem conjugate
addition-arylation of enones reaction was explored. Enone 3.4 undergoes tandem
conjugate addition of CH3MgBr, EtMgBr, n-PrMgBr and n-BuMgBr with subsequent
enolate arylation using Ph3BiCl2 to give products 3.27-3.30 in modest to good yields and
excellent enantiomeric excess (Table 3.2). In each case, the products were obtained as
single stereoisomer, as determined by 1H NMR analysis. To further probe the scope of
this transformation, triarylbismuth(V) dichlorides were prepared by first treating ArMgBr
with BiCl3 followed by oxidation of the resulting triarylbismuth(III) compound with
sulfuryl chloride (SO2Cl2).25 Tandem conjugate addition-arylation using para and meta
168
substituted triarylbismuth(V) dichlorides gave products 3.31-3.34 in modest yields and
excellent enantiomeric excess (Table 3.2).
Table 3.2 Copper-catalyzed enantioselective tandem conjugate addition-arylation using bismuth(V) reagents.a
O
CH3
3.28, 59%96% ee
O
Et
3.27, 62%97% ee
O
Bu
3.30, 58%91% ee
O
Pr
2.29, 53%91% ee
O
Bu
O
Et
F
3.31, 60%95% ee
OMe
3.34, 54%91% ee
OBr
Pr
3.33, 49%90% ee
O
CH3
CH3
3.32, 46%90% ee
R
ArOO 1) CuBr·SMe2 (5 mol%)
TaniaPhos (6 mol%) RMgBr (120 mol%) MeOtBu (0.1M), 0 °C
2) HMPA (120 mol%) Ar3BiCl2 (200 mol%), THF >95:5 d.r
3.4 3.27-3.34
aCited yields are of isolated material. In all cases, > 95:5 diasterioselectivity is observed
169
3.4 Summary and concluding remarks
In summary, we have developed a highly diastereo- and enantioselective method
for vicinal difunctionalization of enones via tandem enantioselective conjugate addition-
arylation using bismuth(V) reagents. To the best of our knowledge, this is the first
example of tandem conjugate addition-arylation of enones using bismuth(V) reagents.
The chemical yields for this reaction are modest due to competing polymerization and
1,2-addition to the carbonyl of the ketone, though we are able to perform a one pot
difunctionalization which has been traditionally been restrained to two separate steps.
170
3.5 Experimental Section
General
All reactions were performed under an atmosphere of argon, unless otherwise
indicated. Anhydrous solvents were transferred by an oven-dried syringe. Flasks were
flame-dried and cooled under argon. diethylether (Et2O) was distilled from
sodium/benzophenone ketyl. Dichloromethane (DCM) was distilled from calcium
hydride. Hexamethylphosphoramide (HMPA) was distilled under reduced pressure from
calcium hydride. Other solvents and chemical reagents obtained from commercial
sources were used without further purification, unless otherwise noted. The known
products 3.27, 3.28,26 3.30,27 and 3.32,28 exhibited spectral data identical in all aspects as
those reported in literature.
Analytical thin-layer chromatography (TLC) was carried out by using 0.2-mm
commercial silica gel plates (DC-Fertigplatten Krieselgel 60 F254, EMD Chemicals).
Solvents for chromatography are listed as volume/volume ratios. Infrared spectra were
recorded on a Perkin-Elmer 1420 spectrometer. Samples were prepared as films through
evaporation from dichloromethane or chloroform solution on sodium chloride plates.
High-resolution mass spectra (HRMS) were obtained on a Karatos MS9 by using
chemical ionization in the positive ionization mode. Accurate masses are reported for the
molecular ion (M + 1) or a suitable fragment ion. Melting points were determined on a
Thomas Hoover Uni-melt apparatus in open capillaries and are uncorrected.
Proton NMR (1H NMR) spectra were recorded with a Varian Gemini (300 MHz)
spectrometer, and Varian Gemini (400 MHz) spectrometer. Chemical shifts (δ) are
171
expressed as ppm relative to trimethylsilane (δ = 0.00 ppm), referenced to the residual
protic solvent. Coupling constants are reported in Hertz. Carbon-13 NMR (13C NMR)
spectra were recorded on a Varian Gemini 300 (75 MHz) spectrometer, Varian Gemini
400 (100 MHz) spectrometer and Inova 500 (125 MHz) spectrometer. Chemical shifts (δ)
are expressed as ppm relative to trimethylsilane (δ = 0.0 ppm), referenced to the center of
the triplet at δ = 77.0 ppm for deuteriochloroform. 13C NMR analyses were run routinely
with broadband decoupling.
Representative procedure for the copper-catalyzed tandem enantioselective
conjugate addition-arylation of enone 3.4
To a 10 mL round bottom flask charged with CuCl (0.01 mmol, 5 mol%) and
Taniaphos (0.02 mmol, 6 mol%) was added Et2O (2.5 mL, 0.1M). The suspension was
stirred at 25 °C for 30 min. 2-Cyclohexenone 3.4 (0.31 mmol, 100 mol%) was added to
the resulting homogenous solution and allowed to stir for an additional 10 min, after
which the reaction vessel was cooled to -78 °C , EtMgBr (3M in Et2O, 0.37 mmol, 120
mol%) was then added dropwise over 5 min. The reaction mixture was stirred for 1h at -
78 °C, at which point HMPA (0.37 mmol, 120 mol%) and a solution of Ph3BiCl2 (0.62
mmol, 200 mol%) in THF (3 mL) were added. The stirring reaction mixture was removed
from the cooling bath and allowed to warm to room temperature over a period of 3 h. A
solution of 50 % aqueous Na2CO3 (3 mL) was added and allowed to stir for 10 min to
convert excess Ph3BiCl2 to the more polar and insoluble Ph3BiCO3 for easy purification.
The resulting mixture was filtered through celite, rinsing three times with Et2O (5 mL).
The filtrate was then extracted with Et2O (3 X 5 mL), the combined organic extracts were
172
dried over MgSO4, filtered and evaporated onto silica gel. Purification via column
chromatography (SiO2, 17:1 to 9:1 hexane/ethyl acetate) gives compound 3.27.
173
3.6 Spectroscopic Characterization Data
O
Et
3-Ethyl-2-phenylcyclohexanone 3.2726 1H NMR (400 MHz, CDCl3): δ 7.33 (t, J
= 6.8 Hz, 2H), 7.25 (t, J = 6.8 Hz, 2H), 7.06 (d, J = 7.2 Hz, 1H), 3.30 (d, J = 11.6 Hz,
1H), 2.52 (m, 1H), 2.45 (td, J = 5.1, 13.1 Hz, 1H), 2.14 (m, 2H), 1.98 (m, 1H), 1.78 (qt, J
= 3.8, 13.3 Hz, 1H), 1.52 (qd, J = 3.4, 13.0 Hz, 1H), 1.25 (m, 1H), 1.07 (hept, J = 7.2
Hz, 1H), 0.80 (t, J = 7.5 Hz, 3H). 13C NMR (100 MHz, CDCl3): δ 210.3, 137.4, 129.3,
128.2, 126.7, 63.3, 46.3, 41.9, 30.0, 27.1, 25.8, 10.5. Chiral HPLC: Daicel Chiralpak
OD-H column, 95:5 hexanes:i-PrOH, λ = 254 nm, 0.5 mL/min, t major = 14.48 min, t minor
= 15.79 min ee = 97%. [α]D23 +80.4 ° (c =1 CH2Cl2)
1H NMR of 3.27
174
13C NMR of 3.27
O
Me
3-Metyl-2-phenylcyclohexanone 3.2826 1H NMR (300 MHz, CDCl3): δ 7.30 (m,
3H), 7.06 (d, J = 6.9 Hz, 2H), 3.18 (d, J = 11.5 Hz, 1H), 2.52 (m, 1H), 2.43 (qd, J = 6.9,
13.6 Hz, 1H), 2.14 (m, 2H), 2.01 (d, J = 14.9 Hz, 1H), 1.82 (qt, J = 4.6, 11.8 Hz, 1H),
1.59 (td, J = 3.6, 13.1 Hz, 1H), 0.80 (t, J = 7.5 Hz, 3H). 13C NMR (75 MHz, CDCl3): δ
209.9, 137.4, 129.2, 128.1, 126.7, 65.1, 41.7, 40.6, 34.2, 25.9, 21.2. Chiral HPLC: Daicel
Chiralpak OD-H column, 95:5 hexanes:i-PrOH, λ = 254 nm, 0.5 mL/min, t major = 14.48
min, t minor = 15.79 min ee = 95%. [α]D23 +75° (c = 0.4 CH2Cl2).
176
O
Pr
2-Phenyl-3-propylcyclohexanone 3.29 1H NMR (400 MHz, CDCl3): δ 7.33 (t, J
= 6.8 Hz, 2H), 7.25 (t, J = 5.8 Hz, 1H), 7.05 (d, J = 6.8 Hz, 2H) 3.27 (d, J = 11.3 Hz,
1H), 2.52 (m, 1H), 2.44 (qdd, J = 1.0, 5.8, 13.7 Hz, 1H), 2.14 (m, 2H), 2.04 (m, 1H), 1.78
(qt, J = 4.4, 14.0 Hz, 1H), 1.50 (qd, J = 3.4, 13.0 Hz, 1H), 1.35 (m, 1H), 1.11(m, 3H),
0.74 (t, J = 7.3 Hz, 3H). 13C NMR (100 MHz, CDCl3): δ 210.3, 137.4, 129.3, 128.2,
126.7, 63.7, 44.7, 41.9, 36.8, 30.6, 25.9, 19.4, 14.0. FTIR (NaCl): 3019, 2948, 2857,
1712, 1496, 1452, 1313, 1176, 745, 698, 556 cm-1. HRMS: calcd for C15H21O [M+1]
217.1592 found 217.1591. Chiral HPLC: Daicel Chiralpak OD-H column, 95:5
hexanes:i-PrOH, λ = 254 nm, 0.5 mL/min, t major = 13.04 min, t minor = 14.73 min ee =
91%. [α]D23 +100 ° (c = 0.5 CH2Cl2)
178
O
Bu
3-Butyl-2-phenylcyclohexanone 3.3027 1H NMR (400 MHz, CDCl3): δ 7.31 (t, J
= 7.1 Hz, 2H), 7.24 (d, J = 7.0 Hz, 1H), 7.05 (d, J = 6.6 Hz, 2H) 3.28 (d, J = 11.3 Hz,
1H), 2.51 (m, 1H), 2.46 (qd, J = 5.8, 13.4 Hz, 1H), 2.08 (m, 2H), 1.78 (m, 1H), 1.53 (m,
1H), 1.24 (m, 6H), 1.08 (t, J = 6.7 Hz, 3H). 13C NMR (100 MHz, CDCl3): δ 210.3,
137.4, 129.3, 128.1, 126.7, 63.6, 44.8, 41.9, 34.1, 30.6, 28.4, 25.8, 22.5, 13.9. Chiral
HPLC: Daicel Chiralpak OD-H column, 95:5 hexanes:i-PrOH, λ = 254 nm, 0.5 mL/min,
t major = 12.57 min, t minor = 14.00 min ee = 91%. [α]D21 +93.7 ° (c = 0.8 CH2Cl2).
1H NMR of 3.30
179
13C NMR of 3.30
O
Et
F
3-Ethyl-2-(4-fluorophenyl)cyclohexanone 3.31 1H NMR (300 MHz, CDCl3): δ
7.02 (d, J = 7.2 Hz, 4H), 3.30 (d, J = 12.0 Hz, 1H), 2.51 (m, 1H), 2.41 (td, J = 6.4, 13.8
Hz, 1H), 2.14 (m, 2H), 1.92 (m, 1H), 1.76 (dt, J = 3.3, 13.0 Hz, 1H), 1.54 (q, J = 13.5
Hz, 1H), 1.25 (m, 1H), 1.06 (quint, J = 7.2 Hz, 1H), 0.80 (t, J = 7.2 Hz, 3H). 13C NMR
(75 MHz, CDCl3): δ 210.1, 161.7 (d, J = 144 Hz) 133.0, 130.6 (d, J = 7.7 Hz), 115.1 (d,
J = 21.4 Hz), 62.5, 46.6, 41.9, 30.1, 27.0, 25.9, 10.4. FTIR (NaCl): 2962, 2934, 2864,
1712, 1602, 1509, 1456, 1221, 1178, 1158, 822 cm-1. HRMS: calcd for C14H18OF [M+1]
221.1342 found 221.1344. Chiral HPLC: Daicel Chiralpak OD-H column, 99:1
hexanes:i-PrOH, λ = 254 nm, 0.5 mL/min, t major = 16.17 min, t minor = 16.58 min ee =
95%. [α]D23 +40.1 ° (c = 0.75 CH2Cl2)
181
O
CH3
CH3
3.Methyl-2-p-tolylcyclohexanone 3.3228 1H NMR (400 MHz, CDCl3): δ 7.16 (t,
J = 8.2 Hz, 2H), 6.98 (d, J = 8.2 Hz, 2H), 3.18 (d, J = 11.5 Hz, 1H), 2.52 (m, 1H), 2.46
(qd, J = 5.9, 13.7 Hz, 1H), 2.36 (s, 3H), 2.10 (m, 3H), 1.85 (qt, J = 3.6, 13.3 Hz, 1H),
1.62 (qd, J = 3.3, 12.5 Hz, 1H), 0.85 (d, J = 6.4 Hz, 3H). 13C NMR (100 MHz, CDCl3): δ
210.2, 136.3, 134.3, 129.1, 129.0, 64.7, 41.8, 40.5, 34.3, 25.9, 21.2, 21.1. Chiral HPLC:
Daicel Chiralpak OD-H column, 95:5 hexanes:i-PrOH, λ = 254 nm, 0.5 mL/min, t major =
12.89 min, t minor = 13.86 min ee = 91%. [α]D21 +27 ° (c = 0.73 CH2Cl2)
1H NMR of 3.32
182
13C NMR of 3.32
O
Pr
Br
2-(4-Bromophenyl)-3-propylcyclohexanone 3.33 1H NMR (400 MHz, CDCl3):
δ 7.47 (d, J = 8.5 Hz, 2H), 6.94 (d, J = 8.5 Hz, 2H), 3.26 (d, J = 11.6 Hz, 1H), 2.52 (m,
1H), 2.43 (tdd, J = 1.0, 6.2, 13.7 Hz, 1H), 2.14 (m, 2H), 1.96 (m, 1H), 1.78 (qt, J = 4.1,
13.0 Hz, 1H), 1.49 (q, J = 11.3 Hz, 1H), 1.34 (m, 1H), 1.10 (m, 3H), 0.75 (t, J = 7.2 Hz,
3H). 13C NMR (100 MHz, CDCl3): δ 209.8, 136.4, 131.3, 131.0, 120.7, 63.2, 44.9, 41.9,
36.7, 30.7, 25.9, 19.3, 14.0. FTIR (NaCl): 2954, 2931, 2848, 1713, 1478, 1454, 1407,
1172, 1067, 1002, 802 cm-1. HRMS: calcd for C15H20O [M+1] 295.0698 found 295.0702.
Chiral HPLC: Daicel Chiralpak OD-H column, 95:5 hexanes:i-PrOH, λ = 254 nm, 0.5
mL/min, t major = 11.42 min, t minor = 12.70 min ee = 90%. [α]D23 +46 ° (c = 0.76 CH2Cl2).
184
O
Bu
OMe
3-Butyl-2-(3-methoxyphenyl)cylohexanone 3.34. 1H NMR (300 MHz, CDCl3):
δ 7.24 (t, J = 7.8 Hz, 1H), 6.81 (dd, J = 1.8, 7.6 Hz, 1H), 6.65 (d, J = 7.8 Hz, 1H), 6.61
(s, 1H), 3.79 (s, 3H), 3.25 (d, J = 8.1 Hz, 1H), 2.51 (m, 1H), 2.42 (td, J = 5.8, 13.3 Hz,
1H), 2.10 (m, 3H), 1.78 (m, 1H), 1.53 (q, J = 10.7 Hz, 1H), 1.20 (m, 6H), 0.78 (t, J = 6.9
Hz, 3H). 13C NMR (75 MHz, CDCl3): δ 210.2, 159.4, 139.0, 129.1, 121.7, 115.3, 111.9,
63.7, 55.1, 44.7, 41.9, 34.1, 30.6, 28.5, 25.8, 22.6, 13.9. FTIR (NaCl): 2931, 2849, 1713,
1596, 1578, 1484, 1454, 1290, 1255, 1161, 1043, 767, 691 cm-1. HRMS: calculated
[M+1] for C17H25O2 261.1855 found 261.1856. Chiral HPLC: Daicel Chiralpak OD-H
column, 95:5 hexanes:i-PrOH, λ = 254 nm, 0.5 mL/min, t major = 16.64 min, t minor =
20.25 min ee = 91%. [α]D22 +40 ° (c =1 CH2Cl2).
186
3.7 References
1 For selected reviews on tandem or “domino” transformations, see: (a) Guo, H.-C.; Ma, J.-A. Angew. Chem. Int. Ed. 2006, 45, 354. (b) Nicolaou, K. C.; Montagnon, T.; Snyder, S. A. Chem. Commun. 2003, 551. (c) Tietze, L. F. Chem. Rev. 1996, 96, 115. (d) Tietze, L. F.; Beifuss, U. Angew. Chem. Int. Ed. 1993, 32, 131. 2 For selected reviews on stoichiometric conjugate addition-electrophilic trapping, see: (a) Suzuki, M.; Noyori, R. Organocopper Reagents 1994, 185. (b) Taylor, R. J. K. Synthesis 1985, 364. (c) Chapdelaine, M. J.; Hulce, M. Org. React. 1990, 38, 225. (d) Ihara, M.; Fukumoto, K. Angew, Chem. Int. Ed. Engl. 1993, 32, 1010.
3 Kharasch, M. S.; Tawney, P. O. J. Am. Chem. Soc. 1941, 63, 2308. 4 Stork, G. Pure Appl. Chem. 1968, 17, 383. 5 Taylor, R. J. K. Synthesis 1985, 364 6 For copper-catalyzed tandem conjugate addition-alkylation see: (a) Naf, F.; Decorzant, R. Helv. Chim. Acta. 1974, 57, 1317. (b) Bornack, W. K.; Bhagwat, S. S.; Pontoton, J.; Helquist, P. J. Am. Chem. Soc. 1981, 103, 4647. (c) Ito, Y.; Nakatsuka, M.; Saegusa, T. J. Am. Chem. Soc. 1982, 104, 7609. 7 For copper-catalyzed tandem conjugate addition-Aldol see: (a) Johnson, C. R.; Meanwell, N. A. J. Am. Chem. Soc. 1981, 103, 7667. (b) Piers, E.; Lau, C. K. Synth. Commun. 1977, 7, 495. (c) Alexakis, A. M.; Chapdelaine, M. J.; Posner, G. H.; Runquist, A. W. Tetrahedron Lett. 1978, 44, 4205. (d) see also Ref. 6a 8 For copper-catalyzed tandem conjugate addition-acylation see: (a) Marshall, J. A.; Hochstetler, A. R. J. Am. Chem. 1969, 91, 648. (b) Pearson, A. Tetrahedron Lett. 1980, 21, 3929. (c) Jackson, W. P.; Ley, S. V. J. Chem. Soc. Perkins Trans. 1 1981, 1516. (d) Danishefsky, S.; Kahn, M.; Silverstri , M. Tetrahedron Lett. 1982, 23, 703. 9 Kretchmer, R. A.; Mihelich, E. D.; Waldron, J. J. J. Org. Chem. 1972, 37, 4483.
10 Danishefsky, S.; Kahn, M.; Silvestri, M. Tetrahedron Lett. 1982, 23, 1419.
11 For reviews on asymmetric conjugate addition see: (a) Feringa, B. L. Acc, Chem Res. 2000, 33, 346. (b) Krause, N.; Hoffmann-Roder, A. Synthesis 2001, 171. (c) Alexakis, A.; Benhaim, C. Eur. J. Org. Chem. 2002, 3221.
187
12 For selected reviews on asymmetric conjugate addition of organozinc reagents to cyclic enones see: (a) Feringa, B. L.; Pineschi, M.; Arnold, L. A.; Imbos, R.; de Vries, A. H. M. Angew, Chem. Int. Ed. Engl. 1997, 36, 2620. (b) Alexakis, A.; Behaim, C.; Roset, S.; Humam, M. J. Am. Chem. Soc. 2002, 124, 5262. 13 For selected reviews on asymmetric conjugate addition of organozinc reagents to cyclopentenones see: (a) Arnold, L. A.; Naasz, R.; Minnaard, A. J.; Feringa, B. L. 2001, J. Am. Chem. Soc. 123, 5841. (b) Degrado, S. J.; Mizutani, H.; Hoveyda, A. J. Am. Chem. Soc. 2001, 123, 755. (c) Degrado, S. J.; Mizutani, H.; Hoveyda, A. H. J. Am. Chem. Soc. 2002, 124, 13362. 14 Reettz, M. T. Chem. Rev.1999, 99, 1121. 15 For selected reviews on asymmetric conjugate addition of organozinc reagents to nitroalkenes see: (a) Alexakis, A.; Rosset, S.; Allamand, J.; March, S.; Guillen, F.; Benhaim, C. Synlett 2001, 1375. (b) Luchao-Cullis, C. A.; Hoveyda, A. H. J. Am. Chem. Soc. 2002, 124, 8192. (c) Duursma, A.; Minnaard, A. J.; Feringa, B. L. J. Am. Chem. Soc. 2003, 125, 3700. 16 Mitzutani, H.; Degrado, S. J.; Hoveyda, A. H. J. Am. Chem. Soc. 2002, 124, 779. 17 For reviews on asymmetric conjugate addition-aldol involving organozinc reagents see: (a) Feringa, B. L.; Pineschi, M.; Arnold, L. A.; Imbos, R.; de Vries, A. H. M. Angew. Chem. Int. Ed. Engl. 1997, 36, 2620. (b) Keller, E., Maurer, J.; Naasz, R.; Schrader, T.; Meetsma, A.; Feringa, B. L. Tetrahdron Asymmetry 1998, 9, 2409. (c) Mandoli, A, Arnold, L. A.; Salvadori, P.; Feringa, B. L. Tetrahdron Asymmetry 2001, 12, 1929. (d) Arnold, L. A.; Naasz, R.; Minnaard, A. J.; Feringa, B. L. J. Org. Chem. 2002, 67, 7244. 18 Agapiou, K.; Cauble, D. F.; Krische, M. J. J. Am. Chem. Soc. 2004, 126, 4528. 19 For selected reviews on asymmetric conjugate addition-allylation involving organozinc reagents see: (a) Naasz, R.; Arnold, L. A.; Pineschi, M.; Keller, E.; Feringa, B. L. J. Am. Chem. Soc. 1999, 121, 1104 (b) Pineschi, M.; Moro F. D.; Gini, F.; Minnaard, A. J.; Feringa, B. L. Chem. Commun. 2004, 1244. 20 For reviews on enantioselective conjugate addition of Grignard reagents to α,β-unsurated carbonyl compounds see: (a) Rossiter, B. E.; Swingle, N. M. Chem. Rev. 1992, 92, 771. (b) also see Ref. 11c 21 (a) Villacorta, G. M.; Rao, P. C.; Lippard, S. J. J. Am. Chem. Soc 1988, 110, 3175. (b) Ahn, K. H.; Klassen, R. B.; Lippard, S. J. Organomet. 1990, 9, 3178.
188
22 For reviews on enantioselective conjugate addition of Grignard reagents to α,β−unsurated carbonyl compounds using thiolates based ligands see: (a) Lambert, F.; Knotter, D. M.; Janssen, M. D.; van Klaveren, M.; Boersma, J.; van Koten, G. Tetrahedron Asymmetry 1991, 2, 1097. (b) Knotter, D. M.; Grove, D. M.; Smeets, W. J. J.; Spek, A. l.; van Koten, G,; J. Am. Chem. Soc. 1992, 114, 3400. (c) Spescha, D.; Rihs, G. Helv. Chim. Acta. 1993, 76, 1219. (d) Zhou, Q.-L.; Pfaltz, A. Tetrahedron 1994, 50, 4467. (e) Braga, A. L.; Silva, S. J. N.; Ludtke, D. S.; Drekener, R. L.; Silveira, C. C.; Rocha, J. B. T.; Wessjohann, L. A. Tetrahedron Lett. 2002, 43, 7329. (f) Seebach, D.; Jaeschke, G.; Pichota, A.; Audergon, L. Helv. Chim. Acta. 1997, 80, 2515. (g) Pichota, A.; Pregosin, P. S.; Valentini, M.; Worle, M.; Seebach, D. Angew., Chem. Int. Ed. Engl. 2000, 39, 153. 23 For reviews on enantioselective conjugate addition of Grignard reagents to α,β−unsurated carbonyl compounds using chiral monophosphine ligands see: (a) Kanai, M.; Tomioka, K. Tetrahedron Lett. 1995, 36, 4275. (b) Nakagawa, Y.; Kanai, M.; Nagaoka, Y.; Tomioka, K. Tetrahedron 1998, 54, 10295. (c) Kanai, M.; Nakagawa, Y.; Tomioka, K. Tetrahedron 1999, 55, 3843. (d) Strangeland, E. L.; Sammakia, T. Tetrahedron 1997, 53, 16503. 24 For Cu-Catalyzed enantioselective conjugate addition of Grignard reagents to enones, see: (a) Feringa, B. L.; Badorrey, R.; Pena, D.; Harutyunyan, S. R.; Minnaard, A. J. Proc. Nat. Acad. Sci. 2004, 101, 5834. (b) Lopez, F.; Harutyunyan, S. R.; Minnaard, A. J.; Feringa, B. L. J. Am. Chem. Soc. 2004, 126, 12784. (c) Lopez, F.; Harutyunyan, S. R.; Meetsma, A.; Minnaard, A. J.; Feringa, B. L. Angew. Chem. Int. Ed. 2005, 44, 2752. (d) Harutyunyan, S. R.; Lopez, F.; Browne, W. R.; Correa, A.; Pena, D.; Badorrey, R.; Meetsma, A.; Minnaard, A. J.; Feringa, B. L. J. Am. Chem. Soc. 2006, 128, 9103. 25 (a) Finet, J. P.; Combes, S. Synth. Commun. 1996, 26, 4569. (b) Koech, P. K.; Krische, M. J. J. Am. Chem. Soc. 2004, 126, 5350. 26 Wang, X.;Pei, T.; Han, X.; Widenhoefer, R. A. Org. Lett. 2003, 5, 2699. 27 Sivasubramanian, S.; Muthusubramanian, S.; Arumugam, N. Ind. J. Chem. Sect B 1982, 21, 718. 28 Han, X.; Wang, X.; Pei, T.; Widenhoefer, R. A. Chem. Eur. J. 2004, 10, 6333.
189
Chapter 4 Hydrogen Mediated Catalytic Addition of Metallo-Aldehyde Enolates to Ketones 4.1 Introduction
Hydrogenation is the most cost effective and atom economical process, however it
is limited to simple reduction of unsaturated π-systems.1 Few hydrogenation reactions
have been utilized in the context of C-C bond formation: they include hydroformylation,2
Fischer-Tropsch-type reactions3 and other C-C bond forming reactions.4 Many reductive
C-C bond forming reactions involve stoichiometric reductants such as silane, borane,
alane and stannane. These reactions often generate stoichiometric byproducts of which
some are toxic. Conversely hydrogenative C-C bond formations are environmentally
benign, atom economical, and cost efficient because stoichoimetric byproducts are not
generated. Inspired by the profound impact of these reactions the Krische group became
interested in developing general methods for hydrogenative C-C bond forming reactions.
4.1.1 Mechanistic Features
In the conventional hydrogenation the mechanism involves a dihydrido metal
complex that hydrometallates the alkyne or alkene to give a organomonohydrido metal
complex intermediate (Scheme 4.1, eq 1). For C-C bond formation to occur capture of
this organomonohydrido metal intermediate is necessary, however this is not possible due
to rapid C-H reductive elimination. Based on Schrock and Osborn studies on
hydrogenation using cationic rhodium complexes the dihydrido (RhIIIH2LnX) and the
monohydrido rhodium (RhIHLn) complexes exist in equilibrium in the presence of an
exogenous base.5 The use of a mild base generates monohydrido metal complex, this
190
could extend the lifetime of the hydrometallated intermediates since it lacks an appendant
hydride, thus C-C bond formation is possible (Scheme 4.1, eq 2). An alternative pathway
involves oxidative coupling to furnish a metallocyle which is known in other rhodium
catalyzed couplings (Scheme 4.1, eq 3).6 In this pathway C-C bond formation precedes
hydrogen activation to form the metallocycle, subsequent σ-bond metathesis with
hydrogen provides the C-C bond formation product. On the basis of these mechanistic
hypotheses the Krische group has developed a family of catalytic hydrogen mediated C-C
bond forming reactions. The focus of this chapter is to give an overview of the reductive
aldol reactions developed in our group and detail my contribution to this area.
R1 R1MLn
R2
HR1
R2
HH H
X
H2 (1 atm)Mn-X (cat)
R2
Mn+2(X)(Ln)H
H
R1MLn
R2R1
R2
HH
MnLnHH-Base
O
R3HO
R3
MLn
LnMn-X
R1 R2
R1 R2
LnM O
R1R2
R3
O
R3H
MLn
H2
R1R2
H O
R3
H
eq1
eq2
eq3
Base
H-MLn
Conventional Hydrogenation
H2-MediatedC-C Bond Formation
H2
Scheme 4.1 A plausible mechanism for hydrogenative C-C bond formation
191
4.1.2 Reductive Aldol Under Hydrogenation Conditions
4.1.2.1 Rh-Catalyzed Hydrogenative Aldol Using Aldehyde Acceptors
Predicated on the mechanistic hypothesis described in section 4.1.1 the Krische
group has developed a rhodium catalyzed hydrogen mediated aldol reaction.7 To assess
the feasibility of this hydrogen mediated reductive aldol reaction, an intramolecular
system was designed that contains a phenyl-substituted monoenone monoaldehyde.
Exposure of this substrate to Rh(COD)2OTf (10 mol%) and PPh3 (24 mol%), under
atmosphere of hydrogen, provided the aldol cyclization product in 21% with concomitant
formation of simple alkene reduction products (Table 4.1, entry 1). On the basis of
Schrock and Osborn’s5 observation that addition of base facilitates the deprotonation of
LnRhIII(H2)X to form RhIHLn which would circumvent competing simple reduction,
KOAc was added. Gratifyingly the yield of the desired products was improved
dramatically (Table 4.1, entry 2). Additionally, electron-deficient phosphine ligands like
(p-CF3Ph)3P improved the partitioning between aldol products and conjugate reduction
products (Table 4.1, entry 4). This was rationalized by invoking and intramolecular co-
ordination of the metal complex to the aldehyde, thus increasing its electrophilicity.
Notably, neutral rhodium complexes such as Wilkinson’s catalyst provided low yields of
the aldol product with substantial quantities of conjugate reduction product (Table 4.1,
entry 5). Control experiments were performed to rule out the possibility of a tandem
conjugate reduction-base aided aldol reaction. The product of conjugate reduction was
subjected to the reaction conditions and no product was obtained. Also this
transformation does not proceed via Morita-Baylis-Hilman reaction since no cyclization
192
product was obtained in the absence of hydrogen. The syn-diastereoselectivity can be
accounted for by a Zimmerman-Traxler type transition state assuming the formation of a
Z-enolate. Aromatic, heteroaromatic, and aliphatic monoenone monoaldehyde substrates
participate in this transformation.
Table 4.1 Rh-catalyzed reductive cyclization of monoenone monoaldehyde 4.1a
Ph
O O
H
RhLn (10 mol%)Ligand (24 mol%)
H2 (1 atm)additive, DCE (0.1M), 25 °C
OH
Ph
O
H
O
Ph
O
Entry
1
2
3
4
5
RhLn
Rh(COD)2OTf
Rh(COD)2OTf
Rh(COD)2OTf
Rh(COD)2OTf
Rh(PPh3)3Cl
Ligand
PPh3
PPh3
(p-CF3Ph)3P
(p-CF3Ph)3P
-----
Additive (mol%)
----
KOAc (30%)
----
KOAc (30%)
KOAc (30%)
Syn-(Anti-aldol)
21% (0%)
58% (1%)
53% (4%)
80% (9%)
1% (0%)
Conjugate Reduction
25%
21%
22%
0.1%
59%
4.1a 4.1b 4.1c
An intermolecular variant of this transformation has been developed through
adjustment of the reaction conditions (Table 4.2). Here two equivalent of the enone,
Rh(COD)2OTf (5 mol%), PPh3 (12 mol%), and KOAc (50 mol%) in an atmosphere of
hydrogen provide reductive aldol products in good yield with modest diastereoselectivity.
By using tri-2-furylphophosphine modified rhodium catalysts the diastereoselectivity of
the reductive aldol reaction was improved tremendously (Table 4.3). 8 The
diastereoselectivities observed in this reaction at ambient temperature and pressure are
comparable to those achieved in related aldol reaction at low-temperature using alkali
enolates. 9 This remarkable diastereoselectivity is attributed to π-acidic ligand tri-2-
193
furphosphine which renders the rhodium center Lewis acidic resulting in a tighter
Zimmerman-Traxler type transition state.
Table 4.2 Intermolecular reductive aldol reaction under hydrogenation conditions
Rh(COD)2OTf (5 mol%)PPh3 (12 mol%)
H2 (1 atm), KOAc (50 mol%)DCE (0.1M), 25 °C
O
H
O
R
150 mol% 100 mol%
O
CH3
OH
R
O
CH3
OH
NO2
O
CH3
OH
OMe
O
CH3
OH O
CH3
OHO CH3
4.292%, (1.8 :1) (syn:anti)
4.375%, (1.7 :1)
4.492%, (2.5 :1)
4.544%, (2 :1)
Table 4.3 Highly syn-selective reductive aldol through tri-2-furylphosphine effect
Rh(COD)2OTf (5 mol%)(2-Fur)3P (12 mol%)
H2 (1 atm), LiCO3 (10 mol%)CH2Cl2, 25 °C
R1
O
H R2
O
150 mol% 100 mol%
R1
O
CH3
R2
OH
CH3
O
CH3
OH
NO2
H3C
O
CH3
OHOBn
H3C
O
CH3
OH
CH3
O
CH3
OH
4.690%, 25 :1 dr
4.790%, 17 :1 dr
4.895%, 50 :1 dr
4.970%, 10 :1 dr
N
O
O Ph
4.1.2.2 Rh-Catalyzed Hydrogenative Aldol Using Ketone Acceptors
Having developed the Rh-catalyzed hydrogenative aldol reaction involving
aldehyde acceptors, the methodology was then extended to other electrophilic partners
194
such as ketones. Whereas similar aldol reactions using ketone acceptors are known,10 it
was anticipated that conjugate reduction would predominate over reductive aldol due to
the reduced electrophilicity of the ketones compared to the aldehydes. Rh-catalyzed
reductive aldol of monoenone mono ketone substrates performed at elevated temperature
(80 °C) provided the desired aldol products in good yields and excellent
diastereoselectivity along with products of conjugate reduction Scheme 4.2.11
R
OCH3
66-83% Aldol Product(8-24% 1,4-Reduction
95:5 d.r
H2 (1 atm)K2CO3 (80 mol%)
DCE, 80 °C
Rh(COD)2OTf (10 mol%)Ph3P (24 mol%)O
n
n = 1, 2R = Ph, Ar, Het-Ar
OHCH3
R
O
n
Scheme 4.2 Rh-catalyzed hydrogenative aldol using ketone acceptors
It was possible to attenuate formation of the undesired conjugate reduction
product by using a more electrophilic dione acceptors. The dione acceptors are more
reactive due to the inductive effect and also the relief of dipole-dipole interaction after
reaction. Monoenone with appendant dione substrates undergo hydrogenative reductive
aldol at ambient temperature to provide bicyclic products as single diastereomers
(Scheme 4.4). Here five and six membered ring formation is achieved setting 3
contiguous stereocenters, of which two are quaternary, in a single manipulation.The
conjugate addition products were not observed, with exception of the strained cis-
decalone 4.13.
195
Table 4.4 Rh-catalyzed hydrogenative aldol using dione acceptors
HO
CH3
OR
CH3OO
On
m
Rh(COD)2OTf (10 mol%)(2-furyl)3P (24 mol%)
H2 (1 atm)K2CO3 (80 mol%)
DCE, 25 oC
m
O
R
>95:5 (syn:anti)Yield %,
(Yield % 1,4 Reduction)
n = 1, 2m = 1, 2
n
HO
CH3
OCH3
O
HO
CH3
OPh
O
HO
CH3O
O Ph
4.1088% (0%)
4.11 73% (0%)
4.1263%(0%)
4.13 65%(15%)
HO
CH3O
O Ph
Based on deuterium labeling experiments, ESI-MS data and control experiments a
plausible catalytic cycle was proposed (Scheme 4.3).12 Starting with oxidative addition of
molecular hydrogen to cationic rhodium complex LnRhIX generates
dihydridorhodium(III) complex LnRhIII(H2)X. Due to its enhanced acidity,13 it can be
deprotonated by an exogenous base to afford a monohydride complex LnRhIH. These
complexes are in equilibrium5 leading to two possible catalytic cycles: the monohydride
catalytic cycle starts with hydrometallation of the enone A by LnRhIH to give the
rhodhium (I) enolate B, which can undergo electrophilic trapping by the appendant
ketone or aldehyde to yield the aldolate C (Scheme 4.3). The rhodium(I) aldolate C
undergoes hydrogen oxidative addition to give the dihydrido rhodium(III) aldolate D
which reductively eliminates to afford the aldol product E. The dihydride cycle involves
LnRhIII(H2)X which hydrometallates the enone A to yield LnRh(III)(alkyl)(hydrido)
196
enolate intermediate F. which can undergo either alkyl-hydrogen reductive elimination to
give the undesired conjugate reduction product G or in the presence of exogenous base
the LnRh(III)(alkyl)(hydrido) enolate F can be deprotonated to yield the rhodhium(I)
enolate B, which shifts the catalytic cycle to the monohydride cycle
LnRh-HLnRh(H)2- HX (Base)
LnRh-X
HX
H2 H2
(Start Here!)
XDihydride
CycleMonohydride
Cycle
H
O
R1R2O
RhIIILnX H
O
R1R2O
O
R1R2O
R1
O OHR2
H
O
R1R2O
RhILn
R1
O OR2
RhILn
R1
O OR2
RhIIILnH H
-HX (Base)
AB
C
DE
F
G
Scheme 4.3 A plausible catalytic mechanism for hydrogenative aldol reaction
4.1.2.3 Rh-Catalyzed Hydrogenative Generation of Metallo-Aldehyde Enolates via
Enal Hydrogenation.
The utility of metallo-aldehyde enolates in the context of an aldol reaction is
complicated by the formation of products that derive from polyaldolization, dehydration,
and Tischenko-type reaction.14 Catalytic aldolizations using aldehyde enolates have been
achieved indirectly through preformed enol silane, or via imminium ion-enamine
catalysis. 15 Given the mild conditions of the Rh-catalyzed reductive aldol reaction,
Krische and co-workers have shown that this method can be used to generate metallo-
197
aldehyde enolates which are subsequently trapped by glyoxals (Table 4.5).16 The aldol
products (β-hydroxy aldehydes) were not stable and therefore derivatization in situ to the
corresponding pyridazine by adding methanolic hydrazine was performed. Coupling of
acrolein and crotonaldehyde to a variety of aromatic and heroaromatic glyoxals is
achieved under Rh-catalyzed hydrogenative reductive aldol conditions. Although the
chemical yields are modest, this transformation represents a novel method for synthesis
of pyridazine rings.
Table 4.5 Rh-catalyzed hydrogenative aldol condensation to pyridazines
Rh(COD)2OTf (1 mol%)PPh3 (2.4 mol%)
H2 (1 atm),KOAc (10mol%)
DCE, 25 °C
H
O
H
O
500 mol%
4.1462%
4.1559%
4.1631%
4.1747%
R1
R2
OH
O
R1
OHR2
O N N
R1
R2
H2NNH2
-3H2O
N N
H3C
N N
H3C
N N
H3C
N N
H3CS
198
4.2 Catalytic Addition of Metallo-Aldehyde Enolates to Ketones
Catalytic direct addition of metallo-aldehyde enolates to ketones is, to the best of
our knowledge, unprecedented. Although a stoichiometric method to accomplish these
aldolizations was reported by Oshima. 17 The primary issues limiting the utility of
metallo-aldehyde enolates in cross-aldolizations with ketone partners are polyaldolization
at the stage of enolate formation and the diminished thermodynamic driving force.
According to the Ab initio calculations by Oshima, the formation of 3-hydroxyaldehyde
((CH3)2CH(OH)CH2CHO from acetone and acetaldehyde has a formation energy of
21.155 kcal/mol, whereas the formation of 3-hydroxyketone (CH3CH(OH)CH2COCH3) is
exothermic with a formation energy of -10.455 kcal/mol. When generating alkali enolates
from aldehydes polyaldolization is a big problem. For example if an aldehyde is treated
with a base to form an enolate, as soon as this enolate is formed it will react with another
molecule of the aldehyde to give an aldolate (Scheme 4.4). This aldolate contains a
reactive aldehyde moiety which can react with another enolate, this process repeats to
provide the polyaldol.
BaseH
OM
H
O OR
H
O
R R
M OH
R
OHR
H
O
R n
Polyaldol
R
Enolate AldolateAldehyde
Scheme 4.4 Polyaldolization during enolate generation
Inspired by the mild conditions for the intra- and intermolecular aldolization of
enone pronucleophiles with glyoxals, aldehyde, and ketone acceptors7-8, 11,16 we directed
our efforts to a more challenging variant: the cross-aldol reaction between aldehydes
199
enolates and ketones under hydrogenation conditions. Herein, we report an
intramolecular catalytic cross-aldol cyclization of keto-enals under hydrogenation
conditions.18
4.2.1 Optimization
To explore the viability of the catalytic addition of metallo-aldehyde enolates to
ketones, keto-enal substrate 4.18a (Table 4.6) was synthesized via allylation of 2-methyl-
1,3-cyclohexanedione, followed by cross metathesis of the allylated product with acrolein
using Grubbs second generation catalyst. Exposure of 4.18a to RhI(COD)2OTf (10
mol%), PPh3 (24 mol%), and KOAc, (100 mol%) in dichloroethane (DCE) at 40 oC
under an atmosphere of hydrogen (1 atm) gave the aldol product 4.18b in 23% yield,
accompanied by a 50% yield of the simple conjugate reduction product 4.18c (Table 4.6,
entry 1). Based on the mechanism, we speculated that the use of a stronger base could
generate a Rh(I) enolate from Rh(III)(hydrido)-enolate thus shifting the mechanism to the
monohydride catalytic cycle resulting in an increase in the desired aldol product.
Accordingly, upon substituting potassium carbonate for potassium acetate the yield of
4.18b increased to 40% (Table 4.6 entry 2). It was speculated that under dilute conditions
polyaldolization associated with aldehyde enolates would be minimized. Indeed under
more dilute conditions, 4.18b is obtained in 59% yield (Table 4.6, entry 3). Under
identical conditions, but changing the solvent to THF the yield of 4.18b is increased to
65% (Table 4.6, entry 4). Finally, using a more electron deficient phosphine ligands,
4.18b is obtained in greater than 70% yield (Table 4.6, entries 5 and 6). All reactions
were run at 40 °C, attempts to perform the reactions at room temperature caused
200
increased reaction time and diminished yields. These conditions were applied to other
substrates to afford both 5- and 6- membered aldol cyclization products (Table 4.7).
Table 4.6 Optimization of the catalytic aldol cycloreduction of keto-enal 4.18a
4.18a
Entry
1
2
3
4
5
6
Ligand
Ph3P
Ph3P
Ph3P
Ph3P
(p-CF3Ph)3P
(2-furyl)3P
Additive
KOAc
K2CO3
K2CO3
K2CO3
K2CO3
K2CO3
Solvent (conc.)
DCE (0.1 M)
DCE (0.1 M)
DCE (0.05 M)
THF (0.05 M)
THF (0.05 M)
THF (0.05 M)
Yield 4.18b 4.18c
23% (50%)
40% (28%)
59% (29%)
65% (32%)
72% (22%)
73% (21%)
4.18b
HO
CH3
OH
CH3
O Rh(COD)2OTf (10 mol%)Ligand (24 mol%)
H2 (1 atm)Additive (100 mol%)
Solvent, 40 oC
O
H
O O4.18c
CH3
OO
H
O
4.2.2 Substrate Scope
Under our standard conditions aldol cycloreduction proceeds well to provide 5-
membered bicyclic aldol products 4.18b and 4.19b in 72% and 73% yield, accompanied
by 16% and 21% of 1,4 reduction products respectively. As illustrated by substrates
4.20a and 4.21a, cyclization to form 6-membered rings occurs in slightly diminished
yields due to increased levels of conjugate reduction products. Here, aldol reaction
provides products 4.20b and 4.21b in 63% and 59% yields with 1,4 reduction products in
30% and 29% respectively. The structural assignment of 4.18b and 4.21b were
corroborated by single crystal x-ray diffraction analysis (Figure 4,1 and 4.2). The major
diastereomer in both cases is the syn-aldol product.
201
Table 4.7 Catalytic aldol cycloredution of keto-enals 4.18a-4.21a
HO
CH3
OH
CH3
4.18a, n = 2, m = 14.19a, n = 1, m = 14.20a, n = 1, m = 24.21a, n = 2, m = 2
OO
On
m
Rh(COD)2OTf (10 mol%)(2-furyl)3P (24 mol%)
H2 (1 atm)K2CO3 (100 mol%)
THF, 40 oC
nm
HO
CH3
OH
O
HO
CH3
OH
O
HO
CH3O
O H
4.19b, 72%, 2:14.19c, (16%)
4.18b, 73%, 10:14.18c, (21%)
4.20b, 63%, 5:14.20c, (30%)
4.21b, 59%, 4:14.21c, (29%)
O
H
4.18b-4.21b, Yield %, syn:anti, 4.18c-4.21c, (Yield % 1,4 Reduction)
HO
CH3O
O H
202
Figure 1 Relative stereochemistry as determined by single X-ray diffraction analysis for
acid derivative of 4.18b
203
Figure 2 Relative stereochemistry as determined by single X-ray diffraction analysis of
product 4.21b
To expand the substrate scope of this new variant of catalytic aldol reaction, we
explored other substrates (Scheme 4.5). Substrates 4.22a and 4.23a undergo
cycloreduction to furnish aldol products 4.22b and 4.23b in moderate yields, these
examples demonstrate that aromatic ketones are viable electrophilic partners in this
transformation. The relative stereochemistry of the syn-aldol major product in 4.22b was
confirmed by NOE experiments. Keto-enals 4.24a and 4.25a highlight the
chemoselectivity of this aldolization reaction when non symmetrical ketones acceptors
are used. For 4.24a the geminal dimethyl substitution makes one of the ketones sterically
encumbered and thus the less sterically hindered ketone undergoes aldol cyclization. In
204
substrate 4.25a cyclization occurs onto the ketone and not the N-benzyl amide. Notably
hydrogenolytic cleavage of N-benzyl amide is not observed. Monoenal monoketone
substrate 4.26a undergoes reductive aldol cyclization efficiently, relative to the 1,3-dione
substrates which are more electrophilic.
HO
CH3
OH
OnCH3
4.22a, n = 14.23a, n = 2
O
O
n
Rh(COD)2OTf (10 mol%)(2-furyl)3P (24 mol%)
H2 (1 atm)K2CO3 (100 mol%)
THF, 40 oC
O
H
4.22b, 63%, 1:3, syn:anti4.22c, (21% 1,4 Reduction)
4.23b, 61%, 2:1, syn:anti4.23c, (20% 1,4 Reduction)
HO
CH3
OH
OCH3
4.24aO
O As AboveO
H
4.24b, 63%, 2:1, syn:anti4.24c, (21% 1,4 Reduction)
N
HO
CH3
OH
O
N
CH3
4.25aO
O As AboveO
H
4.25b, 67%, 2:1, syn:anti4.25c, (20% 1,4 Reduction)
H3C
H3C
H3C
H3C
Ph Ph
HOO
H
4.26a,
O As Above
O
H
4.26b, 61%, 5:1, syn:anti4.26c, (20% 1,4 Reduction)
BzOBzO
Scheme 4.5 Catalytic aldol cycloredution of keto-enals 4.22a-4.26a
205
The observed syn-aldol stereochemistry of the product in this reaction can be
rationalized by invoking a Zimmerman-Traxler transition state and the intermediacy of a
(Z)-enolate (Scheme 10). The anti-aldol products observed could be attributed to
isomerization of the enolates from (Z)-enolate to (E)-enolates. The modest syn:anti ratios
are consistent with lack of selectivity inherent to aldol additions employing aldehyde
enolates. 19 This methodology is the first example of catalytic addition of metallo-
aldehyde enolates to ketones under hydrogenation conditions.
O
H
O
RhLn
HO
CH3O
OH
m n
Z- Enolate syn product
H3CO n
O
H
O
RhLn
H3CO n
m m
Scheme 4.6 Transition state model consistent with observed stereochemistry
4.3 Summary and Concluding Remarks
We have developed the first example of catalytic direct cross-aldolization of
metallo-aldehyde enolates with ketones under hydrogenation conditions. These results
and those previously studied in our group, involving catalytic hydrogen-mediated
reductive coupling of enones to carbonyl acceptors support the feasibility of developing a
broad class of catalytic C-C bond forming reactions using our enone-electrophile
template. This catalytic cross-aldolization of aldehyde enolates with ketones still require
some improvement, since the aldol products are formed in modest diastereoselectivity
and are accompanied by simple reduction products. Future work will be devoted to the
design of a catalyst system that would address these problems.
206
4.4 Experimental Section
General
All reactions were run under an atmosphere of argon, unless otherwise indicated.
Anhydrous solvents were transferred by an oven-dried syringe. Flasks were flame-dried
and cooled under a stream of argon. Dichloroethane was distilled from calcium hydride.
Tetrahydrofuran was distilled from sodium and benzophenone. Acrolein was dried over
magnesiun sulfate and then distilled under argon atmosphere. The acid derived from
4.18b was prepared via Jones oxidation of 4.18b.20
Analytical thin-layer chromatography (TLC) was carried out using 0.2-mm
commercial silica gel plates (DC-Fertigplatten Krieselgel 60 F254). Preparative column
chromatography employing silica gel was performed according to the method of Still.21
Solvents for chromatography are listed as volume/volume ratios. Melting points were
determined on a Thomas-Hoover melting point apparatus in a sealed tube. Infrared
spectra were recorded on a Perkin-Elmer 1420 spectrometer. High-resolution mass
spectra (HRMS) were obtained on a Karatos MS9 and are reported as m/e (relative
intensity). Accurate masses are reported for the molecular ion (M+1) or a suitable
fragment ion.
Proton nuclear magnetic resonance (1H NMR) spectra were recorded with a
Varian Gemini (300 MHz) spectrometer, a Mercury (400 MHz) spectrometer and an
Inova (500 MHz) spectrometer. Chemical Shifts are reported in delta (δ) units, parts per
million (ppm) downfield from trimethylsilane. Coupling constants are reported in Hertz
(Hz). Carbon-13 nuclear magnetic resonance (13C NMR) spectra were recorded with a
207
Varian Gemini 300 (75 MHz) spectrometer, a Mercury 400 (100 MHz) spectrometer and
an Inova 500 (125 MHz) spectrometer. Chemical shifts are reported in delta (δ ) units,
parts per million (ppm) relative to the center of the triplet at 77.00 ppm for
deuteriochloroform. 13C NMR spectra were routinely run with broadbrand decoupling.
Representative Procedure for the Synthesis of Substrates 4.18a, 4.19a, 4.22a, 4.24a,
4.24a, and 4.26a
To a solution of Grubbs second-generation metathesis catalyst (0.142 g, 0.17
mmol, 1 mol%) in anhydrous dichloromethane (100 mL) was added a solution containing
2-allyl-2-methylcyclohexane-1,3-dione11 (2.77 g, 16.7 mmol, 100 mol%) in
dichloromethane (70 mL) and acrolein (2.2 mL, 33.4 mmol, 200 mol%). The solution
was refluxed overnight under an argon atmosphere. After removal of the solvent in vacuo
the dark brown residue was purified via column chromatography (SiO2: hexane/ethyl
acetate, 4:1) to yield 4.18a (1.77 g, 64%).
Representative Procedure for the Synthesis of Substrates 4.20a, and 4.21a
To a solution of 2-methyl-2-propionaldehyde-1,3-cyclopentanedione5 (1.53 g,
9.08 mmol, 100 mol%) in 50 mL chloroform was added wittig reagent
(formylmethylene)triphenylphosphorane (5.54 g 18.16 mmol, 200 mol%). The mixture
was stirred overnight at 50 °C and then concentrated in vacuo to give a wet brown solid.
This material was purified via column chromatography (SiO2: hexane/ ethyl acetate, 9:1
to 7:3) to yield 4.20a (0.632 g, 35%).
208
Procedure for the Synthesis of Substrates 4.23a
To a vigorously stirred mixture of 2-methyl-1, 3-indanedione22 (1 g, 6.25 mmol,
100 mol%) and H2O (15 mL) was added acrolein (0.6 mL, 9.37 mmol, 150 mol%). The
mixture was stirred at room temperature for 15h and then extracted with dichloromethane
(3 x 20 mL), dried over MgSO4 and concentrated in vacuo to give a yellow oil (1.27 g
94% yield) of sufficient purity for the next step. This material (1 g, 4.63 mmol 100
mol%) was refluxed in chloroform with the wittig reagent
(formylmethylene)triphenylphosphorane (2.82 g, 9.26 mmol, 200 mol%) for 18h. Product
purification was done via column chromatography (SiO2: hexane/ ethyl acetate, 8:2) to
give a yellow oil (0.56 g, 40%).
(Benzylpropionylamino)-acetic acid ethyl ester
To a solution containing benzylamino-acetic acid ethyl ester23 (13.5 g, 69.7 mmol,
100 mol%) in chloroform (100 mL) and triethylamine (20 mL, 139.8 mmol, 200 mol%)
at 0 ºC, was added propionyl chloride (7.2 mL, 76.8 mmol, 110 mol%) dropwise over 1h.
The mixture was stirred for an additional hour at room temperature and then diluted with
chloroform 200 mL and washed with 5% aqueous acetic acid (1 X 100 mL), water (1 X
200 mL), brine (1 X 100 mL), and dried over MgSO4. The organic layer was evaporated
in vacuo to afford a yellow liquid (17.24g, 99%) of sufficient purity for the next step.
3- Allyl-1-benzyl-3-methylpyrrolidine-2,4-dione
To a refluxing suspension of NaH (60% dispersion in mineral oil) (1.0 g, 22.07
mmol, 110 mol%) in THF (50 mL), was added dropwise a solution of
209
(benzylpropionylamino)-acetic acid ethyl ester (5.0 g, 20.07 mmol, 100 mol%), in THF
(50 mL). After addition was complete the reaction was refluxed for 12h during which a
pale yellow solid formed. The mixture was cooled and the solid was filtered and dried in
vacuo to yield a pale yellow solid (5.04g, 99%), of sufficient purity for the next step. To
this material (3.0 g, 11.06 mmol, 100 mol%) in water (11 mL) allylbromide (2.68 g,
22.12 mmol, 200 mol%) was added, this mixture was stirred at 50 °C for 15h. The
reaction mixture was extracted with dichloromethane (3 X 10 mL), dried over MgSO4
and concentrated in vacuo to give a yellow oil. This material was purified via column
chromatography (SiO2: hexane/ethyl acetate, 8:2 to 6:4) to yield 1.72g, 64% of the title
compound
Benzoic acid 2-oxo-hex-5-enyl ester
Benzoyl chloride (1.45 mL, 12.5 mmol, 110 mol%), was added dropwise to a
stirred solution of 1-hydroxy-hex-5-en-2-one 24 (1.30 g, 11.3 mmol, 100 mol%) in
pyridine (20 mL) and di-isopropylethylamine (1 mL) at 0 °C. The solution was stirred at
this temperature for 1h and then at room temperature for 2h. The reaction mixture was
evaporated at reduced pressure, the residue was treated with 20 mL of ice cold saturated
with NaHCO3 and extracted with ethyl acetate (2 X 100 mL). The organic phase was
washed with 6M HCl (1 X 10 mL), aqueous NaHCO3 (1 X 10 mL), and water (1 X 5 mL).
The solution was dried over MgSO4 and the solvent removed in vacuo to afford a pale
yellow liquid. This product was purified via column chromatography (SiO2: hexane/ethyl
acetate, 4:1) to yield (2.43g, 99%) of a colorless liquid.
210
Representative Procedure for Catalytic Aldol Cycloreduction of Keto-enals 4.18a-
4.26a
To a clean dry 25 mL round bottom flask charged with Rh(COD)2OTf (24 mg,
0.0515 mmol, 10 mol%) and triphenylphosphine (32 mg, 0.123 mmol, 24 mol%) was
added 10 mL of dry THF. The mixture was stirred for 10 minutes under argon
atmosphere, at which point 4.18a (100 mg, 0.515 mmol, 100 mol%) and potassium
carbonate (72 mg, 0.515 mmol, 100 mol%) was added. The system was purged with
hydrogen gas and the reaction was allowed to stir at 40 ºC under 1 atm of hydrogen until
complete consumption of substrate, at which point the solvent was evaporated and the
product was purified via column chromatography
7a-Hydroxy-3a-methyl-4-oxo-octahydroindene-1-carboxylic acid 4.18b-acid
derivative.
A chromic acid solution was added dropwise to a stirred solution of 4.18b (0.050
g, 0.25 mmol, 100 mol%) in 2 mL ether at 0 °C. The addition continued until a persistent
orange color was observed. The mixture was stirred for 30 minutes, at which point
methanol was added until excess chromic acid had been destroyed. The mixture was
filtered and the filtrate extracted with dichloromethane (3x10 mL). The extracts were
combined, dried over MgSO4, concentrated in vacuo and purified via silica gel column
chromatography dichloromethane/ethyl acetate 4:1 to yield 4.18b-acid derivative (0.036g,
74%) as a white solid.
.
211
4.5 Spectroscopic Characterization Data
CH3O
O
HO
4-(1-Methyl-2,6-dioxocyclohexyl)but-2-enal 4.18a. 1H NMR (300 MHz,
CDCl3): δ 9.43 (d, J = 7.9 Hz, 1H), 6.67 (dt, J = 15.6, 7.4 Hz, 1H), 6.09 (ddt, J = 15.6,
7.2, 1.3, Hz, 1H), 2.74 (m, 4H), 2.60 (m, 2H), 2.09 (m, 1H), 1.87 (m, 1H), 1.39 (s, 3H).
13C NMR (75 MHz, CDCl3): δ 208.8, 193.6, 152.5, 135.6, 64.5, 37.6, 36.4, 23.2, 17.3.
FTIR (NaCl): 2970, 2888, 2822, 1695, 1454, 1419, 1116, 917, 717, 640 cm-1. HRMS
calcd for C11H15O3 [M+1] 195.1021 found 195.1016.
1H NMR of 4.18a
212
13C NMR of 4.18a
HO
CH3
OH
O
7a-Hydroxy-3a-methyl-4-oxo-octahydro-indene-1-carbaldehyde 4.18b
Colorless oil, 1H NMR (300 MHz, CDCl3): δ 9.74 (d, J = 1.7 Hz, 1H), 2.58 (m, 4H), 2.54
(m, 1H), 2.19 (m, 1H), 2.01 (m, 3H), 1.86 (m, 1H), 3.26 (m, 2H), 1.19 (s, 3H). 13C NMR
(75 MHz, CDCl3): δ 212.3, 204.1, 85.4, 62.3, 54.9, 36.7, 31.2, 29.9, 20.5, 20.3, 17.9.
FTIR (NaCl): 3447, 2965, 2883, 1695, 1460, 1419, 1352, 1306, 1202, 1152, 1081, 989
cm-1. HRMS: calcd for C11H15O3 [M-1] 195.1021; found 195.1014.
214
HO
CH3
OOH
O
7a-Hydroxy-3a-methyl-4-oxo-octahydroindene-1-carboxylic acid 4.18b-acid
derivative. 1H NMR (400 MHz, dmso-d6): δ 11.90 (br s, 1H), 5.74 (s, 1H), 2.58 (m, 1H),
2.23 (m, 3H), 2.07-1.92 (m, 2H), 1.83 (m, 2H), 1.49 (m, 2H), 1.36 (m, 1H), 1.04 (s, 3H).
13C NMR (75 MHz, dmso-d6): δ 212.8, 173.1, 83.8, 61.8, 48.4, 36.4, 29.4, 28.8, 21.6,
19.8, 18.5. FTIR (NaCl): 3462, 2950, 2683, 1705, 1460, 1430, 1210, 1080, 930 cm-1.
HRMS: calcd for C11H17O4 [M+1] 213.1127; found 213.1130. MP 118-120 °C.
1H NMR of 4.18b-acid derivative
215
13C NMR of 4.18b-acid derivative
CH3O
O
HO
4-(1-Methyl-2,6-dioxocyclohexyl)butyraldehyde 4.18c. Yellow oil, 1H NMR
(300 MHz, CDCl3): δ 9.73 (t, J = 1.3 Hz, 1H), 268 (m, 4H), 2.43 (td, J = 5.8, 1.3 Hz, 2H),
2.00 (m, 2H), 1.80 (m, 2H), 1.45 (m, 2H), 1.26 (s, 3H); 13C NMR (75 MHz, CDCl3): δ
210.1, 201.6, 65.4, 43.7, 37.9, 35.6, 20.4, 17.6, 17.4. FTIR (NaCl): 2964, 2871, 1727,
1688, 1454, 1427, 1334, 1131, 933, 839 cm-1. HRMS: calcd for C11H17O3 [M+1]
197.1178; found 197.1185.
217
CH3O
OO
H
4-(1-Methyl-2,5-dioxocyclopentyl)but-2-enal 4.19a. 1H NMR (300 MHz,
CDCl3): δ 9.48 (d, J = 7.7 Hz, 1H), 6.71 (dt, J = 15.6, 7.4 Hz, 1H), 6.09 (ddt, J = 15.6,
7.9, 1.3 Hz, 1H), 2.91 (m, 2H), 2.73 (m, 2H), 2.61 (dd, J = 8.7, 1.3 Hz, 2H), 1.21 (s, 3H).
13C NMR (75 MHz, CDCl3): δ 214.5, 193.1, 150.1, 136.2, 55.9, 36.2, 34.9, 20.0. FTIR
(NaCl): 2965, 2842, 2755, 1736, 1680, 1342, 1413, 1127, 978, 814 cm-1.HRMS: calcd for
C10H13O3 [M+1] 181.0865 found 181.0864.
1H NMR of 4.19a
218
13C NMR of 4.19a
HO
CH3
OH
O
6a-Hydroxy-3a-methyl-4-oxo-octahydropentalene-1-carbaldehyde 4.19b. This
product was obtained as an inseparable mixture of syn/anti (2:1) diastereomers. Colorless
oil, 1H NMR (300 MHz, CDCl3): δ 9.76 (d, J =1.2 Hz, 0.5H (anti)), 9.80 (d, J = 1.5 Hz,
1H (syn), 3.00 (td, J = 9.6, 1.4 Hz, 1H), 2.92 (s, 1H), 2.70 (td, J = 8.5, 1.4, Hz, 1H), 2.58
(m, 1H). 13C NMR (75 MHz, CDCl3): δ 220.4, 203.6, 88.6, 59.7, 59.0, 35.5, 33.5, 32.3,
23.8, 16.9. FTIR (NaCl): 3428, 2965, 2875, 1719, 1641, 1556, 1458, 1256, 1073, 754 cm-
1. HRMS: calcd for C10H15O3 [M+1] 183.1021; found 183.1025.
220
CH3O
OO
H
4-(1-Methyl-2,5-dioxocyclopentyl)butyraldehyde 4.19c.Yellow oil, 1H NMR
(400 MHz, CDCl3): δ 9.70 (t, J = 1.4 Hz, 1H), 2.81 (m, 4H), 2.41 (td, J = 7.2, 1.4 Hz,
2H), 1.65 (m, 2H), 1.53 (m, 2H), 1.13 (s, 3H). 13C NMR (75.5 MHz, CDCl3): δ 216,
201.2, 56.6, 43.7, 35.1, 34.2, 19.6, 17.1. FTIR (NaCl): 2936, 2869, 1724, 1452, 1378,
1269, 1161, 1109, 1048, 986 cm-1. HRMS: calcd for C10H15O3 [M+1] 183.1021; found
183.1015.
13H NMR of 4.19c
221
13C NMR of 4.19c
CH3O
O
O H
5-(1-Methyl-2,5-dioxocyclopentenyl)pent-2-enal 4.20a. 1H NMR (300 MHz,
CDCl3): δ 9.47 (d, J = 8.6 Hz, 1H), 6.69 (dt, J = 15.6, 6.7 Hz, 1H), 6.05 (dd, J = 15.6, 7.9
Hz, 1H), 2.79 (m, 4H), 2.23 (m, 2H), 1.86 (t, J = 7.9 Hz, 2H), 1.17 (s, 3H).13C NMR (100
MHz, CDCl3): δ 215.7, 193.6, 156.2, 133.3, 56.0, 35.0, 32.0, 27.8, 20.3. FTIR (NaCl):
2930, 2847, 1721, 1680, 1634, 1450, 1413, 1291, 1127, 1081, 994 cm-1. HRMS: calcd for
C11H15O3 [M+1] 195.1012 found 195.1014
223
HO
CH3O
O H
3a-Hydroxy-7a-methyl-1-oxo-octahydroindene-4-carbaldehyde 4.20b-syn.
Colorless oil, 1H NMR (400 MHz, CDCl3): δ 9.79 (d, J = 0.7 Hz, 1H), 3.50 (s, 1H), 2.55
(m, 1H), 2.33 (m, 1H), 2.24 (m, 2H), 2.06 (m, 1H), 1.78 (m, 3H), 1.57 (m, 1H), 1.34 (m,
2H), 1.04 (s, 3H). 13C NMR (100 MHz, CDCl3): δ 218.5, 205.3, 78.5, 53.9, 53.8, 33.9,
31.1, 29.8, 22.4, 20.8, 17.4. FTIR (NaCl): 3416, 2939, 2848, 1711, 1716, 1454, 1378,
1301, 118, 1071, 1014 cm-1. HRMS: calcd for C11H17O3 [M+1] 197.1178; found
197.1181.
1H NMR of 4.20b-syn
224
13C NMR of 4.20b-syn
HO
CH3O
O H
3a-Hydroxy-7a-methyl-1-oxo-octahydroindene-4-carbaldehyde 4.20b-anti.
Colorless oil, 1H NMR (400 MHz, CDCl3): 9.84 (d, J = 0.7 Hz, 1H), 2.72 (s, 1H), 2.55
(m, 2H), 2.47 (m, 2H), 2.22 (m, 1H), 1.80 (m, 1H), 1.55 (m, 2H), 1.35 (m, 3H), 1.10 (s,
3H). 13C NMR (75 MHz, CDCl3): δ 219.4, 205.7, 78.0, 53.9, 53.6, 32.7, 31.9, 27.3, 24.1,
20.2, 12.6. FTIR (NaCl): 3421, 2934, 2840, 1710, 1644, 1449, 1306, 1219, 1178, 1086,
1060, 947 cm-1. HRMS: calcd for C11H17O3 [M+1] 197.1178 found 197.1181.
226
CH3O
O
O H
5-(1-Methyl-2,5-dioxo-cyclopentyl)pentanal 4.20c. Yellow oil, 1H NMR (300
MHz, CDCl3): δ 9.73 (t, J = 1.5 Hz 1H), 2.76 (m, 4H), 2.41 (td, J = 7.2, 1.5 Hz, 2H), 1.64
(m, 2H), 1.55 (q, J = 7.5 Hz, 2H), 1.15 (m, 2H), 1.11 (s, 3H). 13C NMR (75.5 MHz,
CDCl3): δ 216.5, 201.9, 56.5, 43.3, 35.2, 35.0, 24.1, 22.1, 19.4. FTIR (NaCl): 2929, 2719,
1762, 1716, 1460, 1419, 1373, 1291, 1096, 1045, 989 cm-1. HRMS: calcd for C11H17O3
[M+1] 197.1178; found 197.1181.
1H NMR of 4.20c
227
13C NMR of 4.20c
CH3O
O
HO
5-(1-Methyl-2,6-dioxocyclohexyl)pent-2-enal 4.21a. Yellow solid 1H NMR (300
MHz, CDCl3): δ 9.48 (d, J = 7.9 Hz, 1H), 6.77 (dt, J = 15.6, 6.7 Hz, 1H), 6.08 (dd, 15.6,
7.9 Hz, 1H), 2.71 (m, 4H), 2.04 (m, 2H), 1.99 (m, 4H), 1.32 (s, 3H).13C NMR (75 MHz,
CDCl3): δ 209.9, 193.9, 157.1, 133.0, 64.6, 38.0, 32.9, 28.2, 22.7, 17.4. FTIR (NaCl):
2990, 2951, 2834, 1724, 1693, 1642, 1456, 1219, 1130, 1025, 916 cm-1. HRMS: calcd for
C12H17O3 [M+1] 209.1178 found 209.1175. MP 51-53 °C.
229
HO
CH3O
O H
8a-Hydroxy-4a-methyl-5-oxodecahydronaphthalene-1-carbaldehyde 4.21b.
White solid, 1H NMR (300 MHz, CDCl3): δ 9.76 (d, J = 2.7 Hz, 1H), 2.67 (s, 1H), 2.58
(m, 1H), 2.41 (m, 1H), 2.28 (m, 1H), 2.17 (m, 1H), 2.02 (m, 1H), 1.91 (m, 2H), 1.71 (m,
4H), 1.49 (m, 2H), 1.19 (s, 3H). 13C NMR (75 MHz, CDCl3): δ 212.9, 205.2, 75.2, 54.4,
53.2, 36.3, 31.6, 29.4, 22.3, 21.9, 21.3, 18.9. FTIR (NaCl): 3417, 2945, 2845, 1712, 1629,
1459, 1178, 1166, 962 cm-1 HRMS: calcd for C12H19O3 211.1334; [M+1] found 211.1330.
MP 59-61 °C.
1H NMR of 4.21b
230
13C NMR of 4.21b
CH3O
O
HO
5-(1-Methyl-2,6-dioxocyclohexyl)pentanal 4.21c.Yellow oil, 1H NMR (400
MHz, CDCl3); δ 9.70 (t, J = 1.7 Hz, 1H), 2.62 (m, 4H), 2.38 (td, J = 5.8, 1.7 Hz, 2H),
1.91 (m, 2H), 1.76 (m, 2H), 1.54 (qt, J = 7.4 Hz, 2H), 1.19 (s, 3H), 1.10 (m, 2H). 13C
NMR (100 MHz, CDCl3): δ 210.2, 202.1, 65.3, 43.4, 37.9, 36.4, 24.2, 22.1, 20.0, 17.5.
FTIR (NaCl): 2940, 1721, 1685, 1454, 1419, 1367, 1342, 1224, 1183, 1132, 1106, 1019,
906, 727 cm-1. HRMS: calcd for C12H17O3 [M-1] 209.1178; found 209.1171.
232
CH3O
OO
H
4-(2-Methyl-1,3-dioxoindan-2-yl)but-2-enal 4.22a. White solid 1H NMR (400
MHz, CDCl3): δ 9.37 (d, J = 7.9 Hz, 1H), 8.00 (m, 2H), 7.91 (m, 2H), 6.66 (dt, J = 15.3,
7.7, Hz, 1H), 6.10 (ddt, J = 14.3, 7.9, 1.0 Hz, 1H), 2.77 (dd, J =7.9, 1.4 Hz, 2H), 1.35 (s,
3H). 13C NMR (100 MHz, CDCl3): δ 202.6, 193.2, 150.5, 140.6, 136.3, 136.1, 123.7,
53.2, 37.1, 19.5. FTIR (NaCl): 3083, 2974, 2924, 2858, 1739, 1700, 1677, 1603, 1266,
974 cm-1 HRMS: calcd for C14H13O3 [M+1] 229.0865 found 229.0854. MP 92-94 °C.
1H NMR of 4.22a
233
13C NMR of 4.22a
HO
CH3
OH
O
3a-Hydroxy-8a-methyl-8-oxo-1,2,3,3a,8,8a-hexahydrocyclopenta[a]indene-3-
carbaldehyde 4.22b-syn. Colorless oil, 1H NMR (400 MHz, CDCl3): δ 9.91 (d, J = 1.0
Hz, 1H), 7.75 (m, 3H), 7.55 (m, 1H), 3.83 (s, 1H), 3.14 (dd, J = 5.1, 2.4, Hz, 1H), 2.16
(m, 1H), 2.00 (m, 1H), 1.76 (m, 1H), 1.42 (m, 1H), 1.26 (s, 3H). 13C NMR (125 MHz
DMSO-d6): δ 208.3, 202.8, 156.6, 136.1, 134.0, 129.5, 125.3, 122.6, 87.5, 60.4, 59.4,
35.9, 24.1, 18.5. FTIR (NaCl) 3421, 3064, 2940, 2862, 1704, 1603, 1460, 1382, 1297,
1219, 1192, 1017, 932, 726 cm-1. HRMS: calcd for C14H15O3 [M+1] 231.1021; found
231.1015.
236
HO
CH3
OH
O
3a-Hydroxy-8a-methyl-8-oxo-1,2,3,3a,8,8a-hexahydrocyclopenta[a]indene-3-
carbaldehyde 4.22b-anti. Colorless oil, 1H NMR (300 MHz, CDCl3): δ 9.71 (d, J = 2.4
Hz, 1H), 7.75 (dt, J = 8.9, 1.0 Hz, 1H), 7.67 (td, J = 6.5, 1.4 Hz, 1H), 7.58 (d, J = 7.5 Hz,
1H), 7.51 (td, J = 6.8, 1.0 Hz, 1H), 3.14 (m, 1H), 2.68 (s, 1H), 2.32 (dd, J = 6.5, 5.7 Hz,
1H), 1.71 (m, 2H,) 1.18 (m, 4H). 13C NMR (100 MHz, CDCl3): δ 208.5, 203.8, 155.1,
136.2, 135.2, 129.8, 124.8, 123.4, 87.9, 60.2, 59.2, 36.0, 23.8, 18.3. FTIR (NaCl): 3440,
2974, 2877, 1704, 1603, 1464, 1258, 1052, 1006, 699 cm-1. HRMS: calcd for C14H15O3
[M+1] 231.1021; found 231.1028.
1H NMR of 4.22b-anti
239
CH3O
OO
H
4-(2-Methyl-1,3-dioxo-indan-2-yl)butyraldehyde 4.22c. White solid, 1H NMR
(300 MHz, CDCl3): δ 9.65 (t, J = 1.4 Hz, 1H), 7.99 (m, 2H), 7.89 (m, 2H), 2.36 (td, J =
6.2, 1.4 Hz, 2H), 1.84 (m, 2H), 1.42 (m, 2H), 1.29 (s, 3H). 13C NMR (75 MHz, CDCl3): δ
204.5, 201.6, 141.4, 136.2, 123.7, 54.0, 44.8, 34.8, 20.1, 17.8. FTIR (NaCl): 3433, 2943,
2839, 2741, 1739, 1700, 1604, 1460, 1374, 1289, 1239, 990, 792, 730 cm-1. HRMS: calcd
for C14H15O3 [M+1] 231.10212; found 231.10315. MP 73-75 °C.
1H NMR of 4.22c
240
13C NMR of 4.22c
CH3O
O
HO
5-(2-Methyl-1,3-dioxoindan-2-yl)pent-2-enal 4.23a. Yellow oil, 1H NMR (400
MHz, CDCl3); δ 9.36 (d, J = 7.9 Hz, 1H), 7.94 (m, 2H), 7.85 (m, 2H), 6.62 (dt, J = 15.7,
6.5 Hz, 1H), 5.84 (ddt, J = 15.7, 7.5, 1.7 Hz, 1H), 2.15 (m, 2H), 1.98 (m, 2H) 1.27 (s, 3H).
13C NMR (100 MHz, CDCl3): δ 203.7, 193.5, 156.2, 140.9, 136.0, 133.1, 123.4, 53.2,
32.7, 28.1, 20.0. FTIR (NaCl): 3083, 2966, 2920, 2815, 1743, 1701, 1592, 1444, 1266,
1149 982 cm-1. HRMS: calcd for C15H15O3 [M+1] 243.1021; found 243.1024.
242
O
HO
CH3
O H
4a-Hydroxy-9a-methyl-9-oxo-2,3,4,4a,9,9a-hexahydro-1H-fluorene-4-
carbaldehyde 4.23b. Colorless oil, 1H NMR (300 MHz, CDCl3): δ 9.81 (d, J = 0.2 Hz,
1H), 7.76 (d, 7.5 Hz, 1H), 7.63 (m, 2H), 7.46 (m, 1H), 4.16 (s, 1H), 2.25 (m, 2H), 1.80 (m,
2H), 1.67 (m, 1H), 1.55 (m, 1H), 1.27 (m, 1H), 1.08 (s, 3H). 13C NMR (75 MHz, CDCl3):
δ 205.7, 204.5, 156.0, 134.5, 133.4, 128.9, 124.1, 78.7, 59.4, 56.9, 29.6, 23.0, 22.1, 21.5.
FTIR (NaCl): 3417, 2944, 2870, 1709, 1611, 1468, 1297, 1204, 1048, 761 cm-1. HRMS:
calcd for C15H17O3 [M+1] 245.1178; found 245.1181.
1H NMR of 4.23b
243
13C NMR of 4.23b
CH3O
O
HO
4-(2-Methyl-1,3-dioxo-indan-2-yl)pentanal 4.23c.Yellow oil, 1H NMR (300
MHz, CDCl3): δ 9.63 (t, J = 1.7 Hz, 1H), 7.95 (m, 2H), 7.84 (m, 2H), 2.29 (td, J =7.5, 1.5
Hz, 2H), 1.80 (m, 2H), 1.49 (qt, J = 7.2 Hz, 2H), 1.24 (s, 3H), 1.10 (m, 2H). 13C NMR
(75 MHz, CDCl3): δ 204.5, 202.1, 141.2, 135.9, 123.4, 53.8, 43.3, 35.1, 24.5, 22.2, 19.8.
FTIR (NaCl): 2927, 2850, 1740, 1701, 1598, 1462, 1260, 971, 716 cm-1. HRMS: calcd
for C15H17O3 [M+1] 245.1178; found 245.1174.
245
CH3O
OO
HH3C
H3C
4-(1,3,3-Trimethyl-2,5-dioxo-cyclopentyl)but-2-enal 4.24a. Yellow oil,.1H NMR (400
MHz, CDCl3): δ 9.48 (d, J = 7.9 Hz, 1H), 6.67 (dt, J = 15.7, 7.5 Hz, 1H), 6.10 (ddt, J =
15.7, 7.9, 1.4 Hz, 1H), 2.75 (A part of AB system, J = 18.3 Hz, 1H), 2.58 (dd, J = 7.5,
1.0, Hz, 2H), 2.55 ( B part of AB system, J = 18.3 Hz, 1H) 1.30 (s, 3H), 1.23 (s, 3H),
1.18 (s, 3H). 13C NMR (100 MHz, CDCl3): δ 219.2, 214.5, 193.1, 150.4, 136.2, 55.5,
50.5, 46.5, 37.0, 26.0, 25.1, 21.1. FTIR (NaCl): 2971, 2928, 2873, 1720, 1689, 1452,
1382, 1223, 1157 1010cm-1; HRMS: calcd for C12H17O3 [M+1] 209.1178; found
209.1180.
1H NMR of 4.24a
246
13C NMR of 4.24a
HO
CH3
OH
OH3C
H3C
6a-Hydroxy-3a,5,5-trimethyl-4-oxo-octahydropentalene-1-carbaldehyde
4.24b-syn. Colorless oil, 1H NMR (300 MHz, CDCl3): δ 9.75 (d, J = 1.4 Hz, 1H), 3.27 (s,
1H), 2.89 (m, 1H), 2.15 (m, 1H), 2.00 (m, 3H), 1.78 (m, 1H), 1.59 (m, 1H), 1.19 (s, 3H),
1.16 (s, 3H), 1.11 (s, 3H). 13C NMR (75 MHz, CDCl3): δ 225.3, 204.3, 86.8, 60.4, 59.2,
50.2, 46.0, 35.3, 27.4, 26.0, 23.0, 18.5. FTIR (NaCl): 3479, 2967, 2862, 1716, 1460, 1375,
1180, 1029 cm-1. HRMS calculated [M+1] for C12H19O3 211.13342; found 211.13328.
248
HO
CH3
OH
OH3C
H3C
6a-Hydroxy-3a,5,5-trimethyl-4-oxo-octahydropentalene-1-carbaldehyde
4.24b-anti. Colorless oil, 1H NMR (300 MHz, CDCl3): δ 9.93 (d, J = 1.4 Hz, 1H), 2.94 (t,
J = 8.5 Hz, 1H), 2.10 (s, 1H), 1.93 (m, 5H), 1.66 (m, 1H), 1.19 (s, 3H), 1.18 (s, 3H) 1.14
(s, 3H). 13C NMR (75 MHz, CDCl3): δ 223.8, 203.4, 87.0, 61.5, 59.4, 45.6, 45.5, 34.6,
26.8, 26.4, 20.9, 17.8. FTIR (NaCl): 3409, 2966, 2862, 1716, 1448, 1456, 1262, 1176
1033 cm-1. HRMS calculated [M+1] for C12H19O3 211.13342; found 211.13342.
1H NMR of 4.24b-anti
249
13C NMR of 4.24b-anti
CH3O
OO
HH3C
H3C
4-(1,3,3-Trimethyl-2,5-dioxo-cyclopentyl)butyraldehyde 4.24c. Yellow oil, 1H
NMR (400 MHz, CDCl3): δ 9.70 (t, J = 1.4 Hz, 1H), 2.69 (A part of AB system, J = 18.5
Hz, 1H), 2.59 (B part of AB system, J = 18.5 Hz, 1H), 2.39 (td, J = 7.2, 1.4 Hz, 2H),
1.63 (m, 2H), 1.40 (m, 2H), 1.26 (s, 3H), 1.24 (s, 3H), 1.17 (s, 3H). 13C NMR (100 MHz,
CDCl3): δ 220.9, 216.1, 201.2, 56.2, 50.9, 46.3, 43.7, 34.4, 26.5, 24.9, 21.0, 17.4. FTIR
NaCl: 2971, 2927, 1723, 1636, 1456, 1130, 1010 cm-1. HRMS calculated [M+1] for
C12H19O3 211.13342; found 211.13355.
251
NOEt
O
OCH3
Ph
(Benzylpropionylamino)-acetic acid ethyl ester.This compound was isolated as
a mixture of rotomers in the ratio (1.2:1). 1H NMR (400 MHz, DMSO-d6): δ 7.29 (m,
5H), 4.62, 4.49 (2s, 2H), 4.12, 3.99 (2s, 2H), 4.06 (m, 2H), 2.31 (2q, J = 8.5 Hz, 2H),
1.14 (2t, J = 5.5 Hz, 3H), 0.96 (2t, J = 7.5 Hz, 3H). 13C NMR (100 MHz, DMSO-d6): δ
173.7, 173.5, 169.6, 169.2, 137.6, 137.4, 128.6, 128.3, 127.8, 127.3, 127.1, 126.8, 60.8,
60.3, 51.6, 49.2, 48.7, 48.0, 25.3, 25.2, 14.0, 13.9, 14.0,13.9, 9.2. FTIR (NaCl): 3064,
3033, 2994, 2947, 1743, 1650, 1471, 1386, 1188, 1033, 904 cm-1. HRMS: calcd for
C14H20NO3 [M+1] 250.1443; found 250.1442.
1H NMR of (Benzylpropionylamino)-acetic acid ethyl ester
252
N
O
O
Bn
1H NMR of (Benzylpropionylamino)-acetic acid ethyl ester
3-Allyl-1-benzyl-3-methylpyrrolidine-2,4-dione.Yellow oil. 1H NMR (300 MHz,
CDCl3): δ 7.29 (m, 5H), 5.64 (m, 1H), 5.06 (d, J = 17.1 Hz, 2H), 4.75 (A part of AB
system, J = 14.6 Hz, 1H), 4.54 (B part of AB system, J = 14.5 Hz, 1H), 3.65 (A part of
AB system, d, J = 17.8 Hz, 1H), 3.52 (B part of AB system, d, J = 17.8 Hz, 1H), 2.44 (m,
2H), 1.25 (s, 3H). 13C NMR (75 MHz, CDCl3): δ 210.2, 174.4, 135.1, 131.5, 128.9, 128.3,
128.0, 119.8, 54.6, 51.8, 45.8, 40.0, 19.4. FTIR (NaCl): 3064, 3033, 2967, 2920, 1775,
1689, 1464, 1409, 1250, 1006, 920 cm-1. HRMS: calcd [M+1] for C15H18NO2 244.1337;
found 244.1346.
253
1H NMR of 3-Allyl-1-benzyl-3-methylpyrrolidine-2,4-dione
13C NMR of 3-Allyl-1-benzyl-3-methylpyrrolidine-2,4-dione
254
N
CH3O
OO
H
Ph
4-(1-Benzyl-3-methyl-2,4-dioxopyrrolidin-3-yl)but-enal 4.25a. Yellow oil, 1H NMR
(400 MHz, CDCl3): δ 9.35 (d, J = 7.9 Hz, 1H), 7.35 (m, 3H), 7.24 (m, 2H), 6.63 (td, J =
15.4, 7.5 Hz, 1H), 6.11 (ddt, J = 15.7, 7.9, 1.4, Hz, 1H), 4.81 (A part of AB system, J =
14.7 Hz, 1H), 4.47 (B part of AB system, J = 14.7 Hz, 1H) 3.76 (A part of AB system, J
= 18.1, 1H), 3.58 (B part of AB system J = 18.1 Hz, 1H) 2.68 (m, 2H), 1.32 (s, 3H). 13C
NMR (100MHz, CDCl3): δ 208.8, 193.1, 173.4, 149.9, 136.3, 134.8, 129.1, 128.3, 65.8,
54.2, 50.9, 46.0, 37.4, 19.8, 15.2. FTIR (NaCl): 3033, 2928, 2847, 2746, 1775, 1678,
1452, 1413, 1266, 1157, 975 cm-1. HRMS: calcd for C16H18NO3 [M+1] 272.1287; found
272.1286.
1H NMR of 4.25a
255
13C NMR of 4.25a
N
HO
CH3
OH
OPh
2-Benzyl-3a-hydroxy-6a-methyl-1oxo-octahydrocyclopenta[c]pyrrole-4-
carbaldehyde 4.25b. Colorless oil, 1H NMR (400 MHz, CDCl3): δ 9.71 (d, J = 1.0 Hz,
1H), 7.31 (m, 3H), 7.17 (m, 2H), 4.45 (AB system, 2H), 3.45 (s, 1H), 3.26 (s, 2H), 2.77 (t,
J = 7.3 Hz, 1H), 2.27 (m, 1H), 2.04 (m, 1H), 1.80 (m, 1H), 1.67 (m, 1H), 1.22 (s, 3H).
13C NMR (100 MHz, CDCl3): δ 203.8, 177.5, 135.9, 128.8, 128.7, 128.1, 127.8, 127.8,
83.1, 60.4, 56.8, 54.9, 46.4, 34.7, 23.7, 17.1. FTIR (NaCl): 3390, 2824, 2858, 2365, 2334,
1716, 1666, 1262, 1130 cm-1. HRMS: calcd for C16H20O3 [M+1] 274.1443; found
274.1443.
257
N
CH3O
OO
H
Ph
4-(1-Benzyl-3-methyl-2,4-dioxo-pyrrolidin-3-yl)butyraldehyde 4.25c. Yellow
oil, 1H NMR (400 MHz, CDCl3): δ 9.71 (d, J = 1.4 Hz, 1H), 7.31 (m, 5H), 4.66 (s, 2H),
3.72 (A part of AB system, J = 18.1 Hz, 1H), 3.63 ( B part of AB system d, J = 18.7 Hz,
1H), 2.41 (t, J = 6.5 Hz, 2H), 1.75 (m, 2H), 1.57 (m, 1H), 1.45 (m, 1H) 1.25 (s, 3H). 13C
NMR (100 MHz, CDCl3): δ 210.5, 201.2, 174.7, 135.1, 129.0, 128.4, 128.2, 54.4, 51.4,
45.9, 43.7, 34.8, 20.2, 17.4. FTIR (NaCl): 2967, 2916, 2843, 1777, 1689, 1441, 1262 cm-1.
HRMS calculated [M+1] for C16H20NO3 274.14432; found 274.14460.
1H NMR of 4.25c
258
13C NMR of 4.25c
OBzO
Benzoic acid 2-oxohex-5-enyl ester. Colorless liquid 1H NMR (300 MHz,
CDCl3): δ 8.10 (m, 2H), 7.53 (m, 3H), 5.79 (m, 1H), 5.03 (m, 2H), 4.87 (s, 2H), 2.58 (t, J
= 7.0 Hz, 2H), 2.37 (q, J = 6.7 Hz, 2H). 13C NMR (75 MHz, CDCl3): δ 203.2, 165.8,
136.4, 133.4, 133.4, 129.8, 129.1, 128.8, 115.7, 68.4, 38.0, 27.1. FTIR (NaCl): 3080,
2982, 2912, 1798, 1716, 1608, 1448, 1413, 1278, 1215, 1118, 1076, 982 cm-1. HRMS:
calculated for C13H15O3 [M+1] 219.1021; found 219.1024
260
OBzO
O
H
Benzoic acid 2,7-dioxo-hept-5-enyl ester 4.26a. White solid 1H NMR (400 MHz,
CDCl3): δ 9.45 (d, J = 7.7 Hz, 1H), 8.05 (d, J = 5.6 Hz, 2H) 7.56 (m, 1H), 7.43 (t, J =
12.0 Hz, 2H), 6.82 (dt, J = 6.7, 15.6 Hz, 1H), 6.08 (ddt, J =15.9, 7.9, 1.3, Hz, 1H), 4.86
(s, 2H), 2.71 (m, 2H), 2.63 (t, J = 5.1 Hz, 2H). 13C NMR (100 MHz, CDCl3): δ 202.3,
193.6, 165.8, 155.7, 133.5, 133.4, 129.7, 128.8, 128.5, 68.2, 36.5, 25.6. FTIR (NaCl):
3068, 2932, 2815, 2741, 1736, 1681, 1452, 1266, 1130, 1087, 1029, 974 cm-1. HRMS:
calcd for C14H15O4 247.09703 [M+1] found 247.09736. MP 102-104 °C.
1H NMR of 4.26a
261
CHOOHBzO
13C NMR of 4.26a
Benzoic acid 2-formyl-1-hydroxycyclopentylmethyl ester 4.26b. Colorless oil,
1H NMR (400 MHz, CDCl3): δ 9.88 (d, J = 2.0 Hz, 1H), 8.03 (dd, J = 6.5, 1.4 Hz, 2H),
7.58 (tt, J = 7.5 Hz, 1.0 1H), 7.46 (t, J = 8.2 Hz, 2H), 4.49 (A part of AB system, J =
11.4 Hz, 1H), 4.42 (B part of AB system, J = 11.4 Hz, 1H), 3.08 (s, 1H), 2.80 (t,d, J =
8.9, 2.0 Hz, 1H), 2.20 (m, 1H), 2.01 (m, 2H), 1.87 (t, J = 6.5, 2H), 1.76 (m, 1H). 13C
NMR (100 MHz, CDCl3): δ 204.1, 166.6, 133.3, 129.7, 129.5, 128.5, 82.6, 70.3, 57.3,
38.1, 25.7, 22.4. FTIR (NaCl): 3452, 3056, 2963, 1720, 1445, 1270, 1102, 1017 cm-1.
HRMS: calcd for C14H17O4 [M+1] 249.11268; found 249.11298.
263
OBzO
O
H
Benzoic acid 2.7-dioxo-heptyl ester 4.26c. Colorless oil, 1H NMR (400 MHz,
CDCl3): δ 9.76 (t, J = 1.7 Hz, 1H), 8.09 (d, J = 7.2 Hz, 2H), 7.59 (t, J = 7.2 Hz, 1H),
7.46 (t, J = 7.9, 2H), 4.87 (s, 2H), 2.54 (t, J = 7.2, 2H), 2.46 (m, 2H), 1.68 (m, 2H). 13C
NMR (100 MHz, CDCl3): δ 203.6, 202.0, 165.8, 133.4, 129.8, 129.1, 128.5, 68.4, 43.5,
38.4, 22.5, 21.4. FTIR (NaCl): 2935, 2881, 2722, 1720, 1596, 1448, 1274, 1177, 1099,
1033, 920 cm-1. HRMS calculated [M+1] for C14H17O4 249.11268; found 249.11195.
1H NMR of 4.26c
265
4.6 References 1 For selected reviews on hydrogenation, see: (a) Schimdt, O. Chem Rev. 1933, 12, 363. (b) Hoelscher, H. E.; Poynter, W. G.; Weger, E. Chem. Rev. 1954, 54, 575. (c) Muetterties, E. L.; Bleeke, J. R. Acc. Chem. Res. 1979, 12, 324. (d) Knowles, W. S. Acc. Chem Res. 1983, 16, 106. (e) Jessop, P. G.; Ikariya, T.; Noyori, R. Chem. Rev. 1995, 95, 259 (f) Genet, J. –P. Acc. Chem. Res. 2003, 36, 908. 2 For selected reviews on hydroformylation, see: (a) Breit, B.; Seiche, W. Synthesis 2001, 1. (b) Breit, B. Acc. Chem Res. 2003, 36, 264. (c) Tang, W.; Zhang, X. Chem. Rev. 2003, 103, 3029. 3 For selected reviews on Fisher-Tropsch reaction, see: (a) Herrmann, W. A. Angew. Chem. Int. Ed. 1982, 21, 117. (b) Rofer-Depoorter, C. K. Chem. Rev. 1981, 81, 447. 4 (a) Molendar, G. A.; Hoberg, J. J. Am. Chem. Soc. 1992, 114, 3123. (b) Kokubo, K.; Miura, M.; Nomura, M. Organometallics 1995, 14, 4521. 5 For reviews on rhodium complexes in hydrogenation, see: (a) Schrock, R. R.; Osborn, J. A. Chem. Commun. 1970, 567. (b) Schrock, R. R.; Osborn, J. A. J. Am. Chem. Soc. 1976, 98, 2134. (c) Schrock, R. R.; Osborn, J. A. J. Am. Chem. Soc. 1976, 98, 2143. (d) Schrock, R. R.; Osborn, J. A. J. Am. Chem. Soc. 1976, 98, 4450. 6 Cao, P.; Wang, B. Zhang, X. J. Am. Chem. Soc. 2000, 122, 6490. 7 Jang, H.-Y.; Huddleston, R. R.; Krische, M. J. J. Am. Chem. Soc. 2002, 124, 15156. 8 (a) Jung, C.-K.; Garner, S. A.; Krische, M. J. Org. Lett. 2006, 8, 519. (b) Han, S. B.; Krische, M. J. Org. Lett. 2006, 8, 5657. 9 For selected reviews on stereoselective aldol additions, see: (a) Heathcock, C. H. Science, 1981, 214, 395. (b) Heathcock, C. H. ACS Symp. Ser.1982, 185, 55. (c) Evans, D. A.; Nelson, J. V. Taber, T. R. Top. Stereochem. 1982, 13, 1. 10 Huddleston, R.; Cauble, D. F.; Krische, M. J. J. Org. Chem. 2003, 68, 11. 11 Huddleston, R.; Krische, M. J. Org.Lett. 2003, 5, 1143. 12 Jang Hye-Young 2005, Development of Hydrogen-Mediated Carbon-Carbon Bond Formation, Ph.D Thesis, The University of Texas at Austin. 13 Norton, J.R. Transition metal hydrides; Wiley-VCH: New York, 1992, pp 309.
266
14 (a) Heathcock, C. H. “The Aldol Reaction: Acid and General Base Catalysis” in the Comprehensive Organic Synthesis; Trost, B. M., Fleming, I., Heathcock, C. H., Eds.; Pergamon Press: New York, 1991; Vol. 2, pp. 133-179. (b) Alcaide, B.; Almendros, P. Angew. Chem. Int. Ed. 2003, 42, 858. 15 (a) Denmark, S.; Ghosh, S, K. Angew. Chem. Int. Ed. 2001, 40, 4759. (b) Northrup, A. B.; MacMillan, D. W. C. J. Am. Chem. Soc. 2002, 124, 6798. (c) Pidathala, C.; Hoang, L.; Vignola, N.; List, B. Angew. Chem. Int. Ed. 2003, 42, 2785. 16 Marriner, G. A.; Garner, S. A.; Jang, H.-Y.; Krische, M. J. J. Org. Chem. 2001, 69, 1380. 17 Yachi, K.; Shinokubo, H.; Oshima, K. J. Am. Chem. Soc. 1999, 121, 9465. 18 Koech, P. K.; Krische, M. J. Org. Lett. 2004, 6, 691. 19 Heathcock, C. H.; Buse, C. T.; Kleschick, W. A.; Pirrung, M. C.; Sohn, J. E.; Lampe, J. J. Org. Chem. 1980, 45, 1066. 20 Brown H.C., Imai T., Desai M. C. and Singaram B. J. Am. Chem. Soc. 1985, 107, 4980. 21 Still, W. C.; Kahn, M; Mitra, A. J. Org. Chem. 1978, 43, 2. 22 Mosher, W. A.; Soeder, R. J. Org. Chem. 1971, 36, 1561. 23 Karoyan, P.; Chassaing, G. Tetrahedron Lett. 1997, 38, 85. 24 Ramaswamy S.; Oehischlager, A. Tetrahedron 1991, 47, 1145.
267
Vita
Phillip Kimaiyo Koech was born in Eldoret, Kenya on January 13, 1974, the son
of William Kipkoech Rono and Christine Jemeli Rono. After graduating from Kapsabet
Boys High School, Kapsabet, Kenya, in 1993, he taught at Cengalo Secondary School,
Burnt Forest, Kenya until November 1995 when he joined Kenyatta University, Nairobi,
Kenya where he graduated with a degree of Bachelor of Education in Chemistry and
Mathematics in October of 1999. He taught at Sochoi Secondary School, Lessos, Kenya
from July of 1999 to November of 2000. In January of 2001, he entered the Graduate
School at Central Michigan University, Mt. Pleasant, MI. Under the direction of
Professor Thomas Delia he was awarded the Graduate Research Grant. He graduated
with a degree of Master of Science in Chemistry in December of 2002. In August 2002
he joined the Graduate School at the University of Texas at Austin. Under the direction of
Professor Michael J. Krische, in May of 2005, he was awarded the Welch Summer
Research Fellowship from the Department of Chemistry.
Permanent address: Barekeiwo Village, Lessos-Kapsabet Road P.O Box 249 Lessos,
Kenya.
This dissertation was typed by the author.