corelite divide - dsi surface mount spec sheet...lumen output selected = 999 lms/ft 3500k / 90 cri...
TRANSCRIPT
DESCRIPTION
Catalog #
Project
Comments
Prepared by
Type
Date
SPECIFICATION FEATURES
PS524024EN05/14/2019
1 of 3
Driver/Dimming Options Integral Sensor Integral Emergency Top Cover Finish Mounting Run Length
STD = Standard 0-10V (1%-100%)SR = Sensor Ready (1%-100%)5LT = Fifth Light DALI (5%-100%)5LTHD = Fifth Light DALI (1%-100%)LH = Lutron HiLume 1% EcoSystemsL5 = Lutron 5-Series 5% EcoSystems
SWPD1 = WaveLinx Wireless Integrated Sensor
LWIPD1 = LumaWatt Pro Wireless Integrated Sensor
EL14W = 14-watt, 120V-277V Emergency Battery Pack
EPC = UL924 Bypass Relay
DC = Dust CoverFC = Frosted CoverSC = Solid Cover
(100% Down)(blank) = No Cover
W = WhiteS = SilverB = BlackCC = Custom
Color
SU = Surface Mount - Junction Box 4 = 4 ft 8 = 8 ftXX = Specify
Row Length
LH and L5 driver options not available in 20L lumen package.
SW sensor must be used with “STD” driver. LWI sensor must be used with “SR” sensor ready driver.Integrated Sensors combined with Emergency Circuit require one UL924 Bypass Relay per emergency section.
Surface mount bracket is pre-installed on luminaire. Fixture can be surface mounted to the ceiling or wall in the horizontal or vertical orientation.
Standard row configura-tions over 8’ consist of 4’ and 8’ luminaires.
Series ShieldingLumen Package
Nominal per 4’ sectionColor
TemperatureNumber of
CircuitsAdditional Circuiting Input Voltage
DSI = Divide Suspended Direct/Indirect
WS = WaveStream Specular Optic
WD = WaveStream Diffuse Optic
20L = 2,000 Lms (500 lms/ft)30L = 3,000 Lms (750 lms/ft)40L = 4,000 Lms (1,000 lms/ft)50L = 5,000 Lms (1,250 lms/ft)60L = 6,000 Lms (1,500 lms/ft)
830 = 3000K, 80 CRI835 = 3500K, 80 CRI840 = 4000K, 80 CRI930 = 3000K, 90 CRI935 = 3500K, 90 CRI940 = 4000K, 90 CRI
1 = Single Circuit
D = None (Default Dimming)E = Emergency CircuitS = Secondary CircuitN = Emergency + Secondary
Circuit
120 = 120V277 = 277VUNV = Universal (120V-277V) 347 = 347V
Refer to performance table on Page 3 for more detail.
Additional lead-time may apply for 930, 935 and 940 configurations.
Refers to wiring in cross section.
Secondary circuit not available with integrated sensor options.
Integral 347V driver with STD 0-10V option only. Factory supplied 347V remote transformer for all other driver options.
Corelite
ORDERING INFORMATION
Sample Number: DSI-WS-40L835-1D-UNV-STD-SWPD1-DC-W-SU-16
ElectricalLong-Life LED system coupled with integral electronic drivers to deliver optimal performance. Standard with 120-277V 0-10V dimming drivers (1% standard). 347V 0-10V drivers are available. Dimming wires come standard but can be capped in the field for standard switched operation.
ControlsOptions compatible with Cooper Lighting Solutions’ Connected Lighting Systems:
Refer to the Connected Lighting options page and ordering information for more details.
MountingFixture mounts directly to structureover a 2”x 4” standard electrical box (by others) mounted parallel to fixture into the ceiling or wall. All sections are continuously wired with push-in connectors for fast installation. Fixtures can be joined for straight continuous runs using patented Quick-Tab alignment features. Refer to installationinstructions for further installationdetails.
FinishElectrostatically applied polyester powder coat paint in white, silver, or black. RAL custom colors are available.
ConstructionNominal 2-1/4” x 12” housing constructed from extruded aluminum and die-formed 20 gauge cold rolled steel. Side panel assembly measures just 3/4” tall.
End CapsPrecision engineered 2-piece die cast aluminum alloy end caps attach mechanically to the end of the fixture without exposed fasteners visible from below the fixture. End cap adds 2-1/8” at each end.
Light Engine LED’s are available in 3000K, 3500K or 4000K with CRI options of either ≥80CRI or ≥90CRI. Lumen output will be affected - please refer to the lumen adjustment factor table.
2.9”[73mm]
12.0” [305mm]
0.75”[19mm]
DIVIDE - DSIWaveStream™ LED
Surface MountedDirect / Indirect
The next generation of lighting is here with the architecturally inspired Divide™ series powered by WaveStream™ LED. The broad offering of efficient LED products include a complete family of recessed, linear suspended, surface, and wall mounted luminaires. The Divide’s modern, ultra-shallow design is comple-mented with functionally engineered features for practical use. High performing Accu-Aim™ optics allow for maximum energy savings while achieving desired light levels. Available in 4’, 8’ and continuous run lengths, the Corelite Divide Suspended Series is ideal for open offices, private offices, retail, healthcare and educational facilities.
cULus – 1598Damp Location Listed
LM79/LM80 CompliantROHS Compliant
DesignLights Consortium™ Qualified
• WaveLinx sensor • LumaWatt Pro sensor • Fifth Light DALI driver
PS524024EN05/14/2019
2 of 3
DIVIDE LINEAR SURFACE - DSISPECIFICATION FEATURES CONTINUED
SENSOR OPTIONS QUICK-TAB ALIGNMENT
Integrated sensors are located in the endcap of 4’ units and in the middle of 8’ units for individual and continuous runs. Each unit is individually controllable and can be grouped together using a wireless control system.
Corelite’s patented quick-tab alignment system creates a seamless and simple installation every time. Simply align the tabs into the corresponding slots. The fixture can then hang freely while a single contractor makes the final connections; it all slides back together and is securely fastened in place.
FIXTURE LENGTHS
48" [1219mm]
96" [2438mm]
48” [1219mm]
96” [2438mm]
WAVESTREAM ACCU-AIM OPTIC PATTERNS
Cooper Lighting Solutions 18001 East Colfax AvenueAurora, CO 80011P: 303-393-1522www.cooperlighting.com
Specifications and dimensions subject to change without notice.
WS - Specular WD - Diffuse
Lumen MaintenanceProjected lumen maintenance based on TM-21 standards is L87 > 60,000 hours at 25°C ambient conditions.
Emergency OptionsOptional 120V-277V integral emergency battery pack is 14W maximum, 90 minute output, and powers a 4-foot section. Test switch/indicator button located on the side of the luminaire. Patented EZ Key prevents accidental discharge of the battery during construction. For approximate delivered lumens multiply the lumens per watt of the desired fixture by the wattage of the emergency battery pack (100 lm/W x 14 = 1400 lumens). The combination of integrated sensor and emergency circuit options require an EPC UL924 bypass relay that disables sensor control of emergency sections when normal power is lost.
Integrated Sensing and Control SystemsIntegrated options must be used in conjunction with the associated system and may not be compatible
with other options or accessories. Please consult WaveLinx and LumaWatt Pro system pages for additional details and compatibility. Consult Marketplace Options - Lutron system pages for additional details and compatibility. Requires field commissioning to operate or dim. Contact Lutron at www.lutron.com.
Weight6.0 lbs per foot.
ComplianceModules are UL recognized components and indoor luminaires are cULus listed for 25°C ambient environments, damp location listed, and RoHS compliant. LED modules comply with IESNA LM-79 and LM-80 standards. DesignLights Consortium™ Qualified and classified for DLC Standard and DLC Premium, refer to www.designlights.org for details.
WarrantyFive year warranty.
LengthsAvailable in 4-ft and 8-ft sections. All sections are modular eliminating the need for starter, joiner and end sections. Standard row configurations over 8-ft consist of 4-ft and 8-ft luminaires unless otherwise specified.
OpticsOptical grade acrylic embedded with patented Accu-Aim™ micro-optics for optimal distribution, low glare, and high performance. Specular (WS) or diffuse (WD) optical patterns are available to achieve the right look for any application. See page 3 photometric data for optical performance.
Top Cover OptionsDust Cover (DC) option is a clear formed polycarbonate for worry free cleaning and protection. Frosted Cover (FC) option is a frosted formed polycarbonate for worry free cleaning, reduced uplight, and protection. Solid Cover (SC) option is a high reflectance white powder coat painted steel reflector for 100% downlight.
PS524024EN05/14/2019
3 of 3
DIVIDE LINEAR SURFACE - DSIENERGY AND PERFORMANCE DATA
LUMEN ADJUSTMENT FACTORS
LUMEN MAINTENANCE
Cooper Lighting Solutions 18001 East Colfax AvenueAurora, CO 80011P: 303-393-1522www.cooperlighting.com
Specifications and dimensions subject to change without notice.
Ambient Temperature
TM-21 Lumen Maintenance
(60,000 hours)
Theoretical L70
(Hours)
25°C >87% 256,000
Example Calculation:WS / 40L / 3500K / 80 CRILumen Output selected = 999 lms/ft
3500K / 90 CRI DesiredLumen Adjustment Factor = 0.861
Adjusted Lumen Output = 999 lms/ft x 0.861 = 860 lms/ft
CCT 80 CRI 90 CRI
3000K 0.955 0.830
3500K 1.000 0.861
4000K 1.012 0.883
PHOTOMETRICS
Zone Lumens%
FixtureVertical Angle 0º 45º 90º
0º-30º 697 17.4 45º 3218 3285 3304
0º-90º 2912 72.9 55º 3310 3281 3193
90º-130º 760 19.0 65º 3282 3130 3027
90º-180º 1083 27.1 75º 2927 2770 2718
0º-180º 3995 100 85º 1931 2665 31670º
90º90º
0º
ZONAL LUMENS SUMMARYLUMINANCE DATA (CD/M2)
FILE NAME: DSI-WS-40L835-1D-UNV-4.IES
LAMP: (LD2) LED 3500K
LUMENS: 3995 Lm
WATTS: 30.0 W
LPW: 133 Lm/W
TEST NO.: P35725
165°
135°
105°214
428
642
856
120°
150°
180°
0
214
428
642
8560°
30°
60°
90°
15°
45°
75°
COLOR DATA (3500K)
80CRI
TM-30-15Rf 82.3
Rg 94.4
CRI/CIERa 84.0
R9 17.2
Divide Surface LED Light Level Outputs and Distributions (3500K, 80 CRI)
SeriesLumen
PackageDelivered Lumens Wattage Efficacy
LPWDistribution
4FT Per FT 4FT Per FT % Up % Down
DSI-WS
20L 2069 517 15.2 3.8 136
27% 73%
30L 3000 750 22.4 5.6 134
40L 3995 999 29.9 7.5 134
50L 5039 1260 37.8 9.5 133
60L 5968 1492 46.7 11.7 128
DSI-WD
20L 2123 531 15.2 3.8 140
29% 71%
30L 3079 770 22.4 5.6 137
40L 4100 1025 29.9 7.5 137
50L 5172 1293 37.8 9.5 137
60L 6125 1531 46.7 11.7 131
27% UP / 73% DOWN
Zone Lumens%
FixtureVertical Angle 0º 45º 90º
0º-30º 308 16.4 45º 2928 3168 3409
0º-90º 2910 71.0 55º 2956 3301 3538
90º-130º 821 20.0 65º 2965 3319 3561
90º-180º 1190 29.0 75º 2868 3210 3447
0º-180º 4100 100 85º 1954 3048 359690º
0º
ZONAL LUMENS SUMMARYLUMINANCE DATA (CD/M2)
FILE NAME: DSI-WD-40L835-1D-UNV-4.IES
LAMP: (LD2) LED 3500K
LUMENS: 4100 Lm
WATTS: 30.0 W
LPW: 137 Lm/W
TEST NO.: P213060
165°
135°
105°206
418
619
825
120°
150°
180°
0
206
418
619
8250°
30°
60°
90°
15°
45°
75°
29% UP / 71% DOWN