corian thin fronts, easily installed
TRANSCRIPT
WHEN USING THE NEW BLUM FIXING SYSTEM FOR THIN FRONTS FOR DOORS, DRAWERS AND LIFT SYSTEMS.
CORIAN® THIN FRONTS, EASILY INSTALLED
REDISCOVER CORIAN®
Add another dimension to your design by using Corian® for your drawer and door finishes. Utilising the new fixing system by Blum for lift systems, doors and pullouts, installing Corian® door and drawer fronts is easier than ever before.
Corian® Furniture with inner pullouts can be implemented with the new CLIP top BLUMOTION fixing mechanism without the need for a hinge boss thanks to 0-protrusion.
Corian® is suitable for lift system door fronts. With unchanged fixing positions, Blum AVENTOS HK top, HS and HL can be implemented easily.
Corian® drawer fronts take very little time to assemble with the Blum system.
AN EASILY ASSEMBLED SYSTEMCorian® doors and drawers are easily assembled using the latest Blum fixings based on the EXPANDO T system. All EXPANDO T have a fixed drilling diameter of 10mm and a drilling depth of just 6mm.
6mm
PROGRAMME OVERVIEWEXPANDO T – Solution for thin fronts
Lift systems
Hinge systems
Box systems
Other products
AVENTOS front fixing bracket
for HK top, HS and HL 20S42T1
Fixing positions according to the Blum catalogue
CLIP top BLUMOTION for thin doors
Hinge Spring Colour Part No.
CLIP topBLUMOTION
• NI 71B453T
For planning information see hinge brochure
Drilling depth
Screws with M4 thread have to be used for EXPANDO T single.
BT Drilling depth
ES Screw penetration depth
ES min = 4 mm
ES max = BT - 0.5 mm
Assembly of EXPANDO T
Space requirement and drilling pattern for LEGRABOX front/base stabiliser
X = 14 + FA
FA Front overlay
** min 80
LEGRABOX front fixing bracket
Height
M ZF7M70T2
K ZF7K70T2
N ZF7N70T2
Fixing positions according to the Blum catalogue
EXPANDO T – single
70T4532T
LEGRABOX front/base stabiliser
cabinet width of 601 mm or greater 1 xcabinet width of 901 mm or greater 2 xfront height of 381 mm or greater 1 x
Z96.00T1
Tip: Always follow the manufacturers instructions. It is recommended that the assembly be carried out by an experienced furniture manufacture or licenced Corian® Fabricator.
casf.com.au
1300 795 044
Linkedin.com/company/casf-australia
Facebook.com/casfsurfaces
Instagram.com/casfsurfaces
pinterest.com.au/casfsurfaces
Corian®, the Corian® Design logo and Make Your Space™ are registered trademarks or trademarks or copyrighted material of E. I. du Pont de Nemours and Company or its affiliates. © Copyright 2021 E. I. du Pont de Nemours and Company or its affiliates. Only DuPont produces Corian®. Other logos, registered trademarks and trademarks are property of their
respective owners. All rights reserved. No copy or extraction of its content is authorised. This document is protected by all applicable laws on copyright and intellectual property.